ASTM Volume 03.01, July 2016 Metals -- Mechanical ... - JSA Webdesk [PDF]

Standard Test Methods for Tension Testing of Metallic Materials. 6 E9-09. Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature. 7 E10-15a. Standard Test Method for Brinell Hardness of Metallic Materials. 8 E18-16. Standard Test Methods for Rockwell Hardness of Metallic Materials.

44 downloads 14 Views 92KB Size

Recommend Stories


eNews! Volume 545 (July 2016)
No amount of guilt can solve the past, and no amount of anxiety can change the future. Anonymous

July-September 2016, Volume 18 No. 1
It always seems impossible until it is done. Nelson Mandela

Volume 5, Issue 2 July 2016
Raise your words, not voice. It is rain that grows flowers, not thunder. Rumi

28 July 2016 (PDF, 29KB)
The only limits you see are the ones you impose on yourself. Dr. Wayne Dyer

ASTM Volume 01.02, January 2017 Ferrous Castings
We must be willing to let go of the life we have planned, so as to have the life that is waiting for

Volume 3, July 2010
You have to expect things of yourself before you can do them. Michael Jordan

ASTM
I want to sing like the birds sing, not worrying about who hears or what they think. Rumi

JULY 2016
You have to expect things of yourself before you can do them. Michael Jordan

dansk metals love 2016
Ego says, "Once everything falls into place, I'll feel peace." Spirit says "Find your peace, and then

JULY 2016
When you talk, you are only repeating what you already know. But if you listen, you may learn something

Idea Transcript


ASTM Volume 03.01, July 2016 Metals -- Mechanical Testing; Elevated and Low-Temperature Tests; Metallography Table of Contents Standard Number

Title

1 E3-11

Standard Guide for Preparation of Metallographic Specimens

2 E4-15

Standard Practices for Force Verification of Testing Machines

3 E6-15

Standard Terminology Relating to Methods of Mechanical Testing

4 E7-15

Standard Terminology Relating to Metallography

5 E8/E8M-15a

Standard Test Methods for Tension Testing of Metallic Materials

6 E9-09

Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

7 E10-15a

Standard Test Method for Brinell Hardness of Metallic Materials

8 E18-16

Standard Test Methods for Rockwell Hardness of Metallic Materials

9 E21-09

Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

10 E23-16a

Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

11 E45-13

13 E81-96(2011)

Standard Test Methods for Determining the Inclusion Content of Steel Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines Standard Test Method for Preparing Quantitative Pole Figures

14 E82/E82M-14

Standard Test Method for Determining the Orientation of a Metal Crystal

15 E83-10a

Standard Practice for Verification and Classification of Extensometer Systems

12 E74-13a

16 E92-16

Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

17 E103-12

Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

18 E110-14 19 E111-04(2010) 20 E112-13

Standard Test Methods for Determining Average Grain Size

21 E132-04(2010)

24 E143-13

Standard Test Method for Poisson's Ratio at Room Temperature Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness Standard Test Method for Shear Modulus at Room Temperature

25 E175-82(2010)

Standard Terminology of Microscopy

26 E190-14

31 E290-14

Standard Test Method for Guided Bend Test for Ductility of Welds Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates Standard Test Method for Pin-Type Bearing Test of Metallic Materials Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages Standard Test Methods for Bend Testing of Material for Ductility

32 E292-09e1

Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

33 E328-13

Standard Test Methods for Stress Relaxation Tests for Materials and Structures

34 E340-15

Standard Practice for Macroetching Metals and Alloys

22 E139-11 23 E140-12be1

27 E208-06(2012) 28 E209-00(2010) 29 E238-12 30 E251-92(2014)

35 E345-93(2013)e1

Standard Test Methods of Tension Testing of Metallic Foil

36 E381-01(2012)

Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

37 E384-16

39 E407-07(2015)e1

Standard Test Method for Microindentation Hardness of Materials Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials Standard Practice for Microetching Metals and Alloys

40 E436-03(2014)

Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels

41 E448-82(2008)

Standard Practice for Scleroscope Hardness Testing of Metallic Materials Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

38 E399-12e3

42 E466-15 43 E467-08(2014) 44 E468-11

1/4

ASTM Volume 03.01, July 2016 Metals -- Mechanical Testing; Elevated and Low-Temperature Tests; Metallography Table of Contents Standard Number

Title

45 E517-00(2010)

Standard Test Method for Plastic Strain Ratio r for Sheet Metal

46 E561-15a

Standard Test Method for KR Curve Determination

47 E562-11

Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

48 E604-15

Standard Test Method for Dynamic Tear Testing of Metallic Materials

49 E606/E606M-12

Standard Test Method for Strain-Controlled Fatigue Testing Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air Standard Test Method for Ball Punch Deformation of Metallic Sheet Material Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials Standard Test Method for Measurement of Fatigue Crack Growth Rates Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

50 E633-13 51 E643-15 52 E646-16 53 E647-15 54 E739-10(2015) 55 E740/E740M-03(2010)e2 56 E766-14e1 57 E768-99(2010)e1 58 E837-13a 59 E855-08(2013) 60 E883-11 61 E915-10 62 E930-99(2015) 63 E963-95(2010) 64 E975-13 65 E986-04(2010) 66 E1012-14 67 E1049-85(2011)e1

Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading Standard Guide for Reflected-Light Photomicrography Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation Standard Practice for Scanning Electron Microscope Beam Size Characterization Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application Standard Practices for Cycle Counting in Fatigue Analysis

68 E1077-14

Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

69 E1180-08(2014)

Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation

70 E1181-02(2015)

Standard Test Methods for Characterizing Duplex Grain Sizes Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels Standard Guide for Installing Bonded Resistance Strain Gages Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials Standard Guide for High-Temperature Static Strain Measurement

71 E1221-12a 72 E1237-93(2014) 73 E1245-03(2008) 74 E1268-01(2016) 75 E1304-97(2014) 76 E1319-98(2014) 77 E1351-01(2012) 78 E1382-97(2015) 79 E1426-14 80 E1450-09

Standard Practice for Production and Evaluation of Field Metallographic Replicas Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

81 E1457-15

Standard Test Method for Measurement of Creep Crack Growth Times in Metals

82 E1508-12a

Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

83 E1558-09(2014)

Standard Guide for Electrolytic Polishing of Metallographic Specimens

84 E1561-93(2014)

Standard Practice for Analysis of Strain Gage Rosette Data Standard Test Method for Determining Threshold Stress Intensity Factor for EnvironmentAssisted Cracking of Metallic Materials

85 E1681-03(2013)

2/4

ASTM Volume 03.01, July 2016 Metals -- Mechanical Testing; Elevated and Low-Temperature Tests; Metallography Table of Contents Standard Number 86 E1685-13 87 E1820-15a 88 E1823-13 89 E1856-13 90 E1875-13 91 E1876-15 92 E1920-03(2014) 93 E1921-15ae1 94 E1922-04(2015) 95 E1928-13 96 E1942-98(2010)e1 97 E1949-03(2014)e1 98 E1951-14 99 E2014-11 100 E2015-04(2014) 101 E2109-01(2014) 102 E2142-08(2015) 103 E2207-15 104 E2208-02(2010)e1 105 E2218-15 106 E2244-11e1 107 E2245-11e1 108 E2246-11e1 109 E2248-15 110 E2283-08(2014) 111 E2298-15 112 E2309/E2309M-16 113 E2368-10 114 E2428-15a 115 E2443-05(2010)e1 116 E2444-11e1 117 E2448-11e1 118 E2472-12e1 119 E2492-07(2012) 120 E2546-15 121 E2567-16a 122 E2624-15 123 E2627-13 124 E2658-15

Title Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic PulseEcho Technique Standard Test Method for Measurement of Fracture Toughness Standard Terminology Relating to Fatigue and Fracture Testing Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages Standard Guide for Calibrating Reticles and Light Microscope Magnifications Standard Guide on Metallographic Laboratory Safety Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems Standard Test Method for Determining Forming Limit Curves Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features Standard Test Method for Instrumented Impact Testing of Metallic Materials Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines Standard Practice for Strain Controlled Thermomechanical Fatigue Testing Standard Practice for Calibration and Verification of Torque Transducers Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets Terminology Relating to Measurements Taken on Thin, Reflecting Films Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials Standard Test Method for Determination of Resistance to Stable Crack Extension under LowConstraint Conditions Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test Standard Practice for Instrumented Indentation Testing Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis Standard Practice for Torque Calibration of Testing Machines Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials Standard Practices for Verification of Speed for Material Testing Machines

3/4

ASTM Volume 03.01, July 2016 Metals -- Mechanical Testing; Elevated and Low-Temperature Tests; Metallography Table of Contents Standard Number

Title

125 E2712-15

Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet

126 E2714-13

Standard Test Method for Creep-Fatigue Testing

127 E2760-10e2

Standard Test Method for Creep-Fatigue Crack Growth Testing

128 E2789-10(2015)

Standard Guide for Fretting Fatigue Testing

129 E2818-11

Standard Practice for Determination of Quasistatic Fracture Toughness of Welds

130 E2860-12

Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

131 E2899-15 132 E2948-14

4/4

Smile Life

When life gives you a hundred reasons to cry, show life that you have a thousand reasons to smile

Get in touch

© Copyright 2015 - 2024 PDFFOX.COM - All rights reserved.