ASME Boiler and Pressure Vessel Code
2015
Fact Book
1
October 27, 2014 IHS 15 Inverness Way East Englewood, CO 80112 Subject: 2015 BPVC Release & Revision Cycle Valued Partner: Please feel free to inform or remind your customers that the 2015 ASME Boiler and Pressure Vessel Code will be released in the new two-year cycle and will be available in the summer of 2015. Code users will continue to have the option of purchasing either the hardcopy or an electronic version from a licensed reseller, such as IHS. We have received positive feedback about the change to the two-year cycle. Certificate-holders are finding it easier to comply with the Code with the elimination of the Addenda and a reduction in the changes. As you know, the Errata, Interpretations and Code Cases will continue to be updated regularly, in between new releases of the Code, and will be available to your customers as they are issued as part of their online subscriptions or via hardcopy purchases. As I have mentioned in the past, the online IHS BPVC Advantage HTML version of the Code remains available to those customers who wish to transition from print or the traditional read-only electronic version to a dynamically linked, interactive tool. The HTML version of the Code has proven to be particularly relevant to Code users given current issues around the engineering workforce and global supply chains. We are pleased that IHS again is participating in educating the industry about the changes to the BPVC, as well as the new revision cycle. I am confident that your customers will not only get the great customer service they have enjoyed over the years but will have the convenience of obtaining ASME referenced standards, codes, companion data as well as opportunities to participate in training. Sincerely,
Michael Merker Managing Director, Conformity Assessment & Publishing +1-212-591-8480
[email protected]
Table of Contents Facts About the ASME BPVC_______________________________________________ Page 5 - 6 Segmentation & Products_________________________________________________ Page 7-10 Key Changes for 2015___________________________________________________ Page 11-12 FAQs________________________________________________________________ Page 13-14 ASME Certification Mark Standards Packages___________________________________ Page 15 Related Codes, Standards and Publications_____________________________________ Page 16 Order Form______________________________________________________________ Page 17 ASME Training & Development_______________________________________________ Page 19 Contact Us_______________________________________________________________ Page 18
Order Now for Great Savings IHS is pleased to announce the new 2015 edition of the ASME Boiler and Pressure Vessel Code (BPVC). ASME BPVC is available at prices that can’t be found anywhere else.
By ordering through IHS you get the best pricing and access to the 2015 Code with all its new content and important changes as soon as it rolls off the presses.
Today, more than ever, Code users rely on the updated information to ensure safety and compliance. The Code is the source for keeping current with technical and market trends governing the design, fabrication, and inspection of boilers, pressure vessels and nuclear power plant components during construction.
You have relied on IHS to provide the most flexibility for access to the code as well as competitive pricing. In the following pages, you will find pricing and options for ordering the Code, companion standards, regulations as well as training. Whether you use traditional hardcopy or IHS online versions we look forward to helping you select the best solution for you and your organization.
As in the past, IHS is offering exceptional savings through discounts, free IHS BPVC binders that normally list at $20 each and no billing until the 2015 ASME BPVC ships.
To learn more, visit IHS Standards Store or call toll-free at +1 800 854 7179.
Sincerely,
Billy Hughes Sales Manager
4
A Guide to the 2015 ASME Boiler and Pressure Vessel Code The ASME Boiler & Pressure Vessel Code (BPVC) establishes rules of safety governing the design, fabrication, maintenance and inspection of boilers and pressure vessels, power producing machines (and associated subsystems) and nuclear power plant components. The latest version of the BPVC will include changes that could impact virtually everyone who uses the Code. Understanding these changes is critical to ensuring compliance with the new requirements of the 2015 BPVC. Ensure you have all the information you need related to boilers and pressure vessels! For more information on the Code, visit www.ihs.com/2015bpvc.
5
A Few Facts About the BPVC
Two-year Publication Cycle
The BPVC comprises three components:
For many years the BPVC was on a three-year publication cycle, with a new edition of the Code being released every three years, and addenda being offered in intervening years. But with the release of the 2013 BPVC, this publication cycle was changed to a two-year schedule. Therefore, the next edition of the BPVC will be released in the Summer of 2015. Now that ASME is offering a new edition of the BPVC every other year, it will no longer be publishing addenda. ASME may issue errata to the Code periodically. These errata will be available at no charge on the IHS Standards Store.
• Boiler and pressure vessel component • Section I – Rules for Construction of Power Boilers • Section IV – Rules for Construction of Heating Boilers • Section VI - Recommended Rules for the Care and Operation of Heating Boilers • Recommended Guidelines for the Care of Power Boilers • Section VIII – Rules for Construction of Pressure Vessels • Section X – Fiber-Reinforced Plastic Pressure Vessels • Section XII – Rules for Construction and Continued Service of Transport Tanks • Nuclear component (including inservice inspection) • Section III – Rules for Construction of Nuclear Facility Components • Section III Appendices • Section XI – Rules for Inservice Inspection of Nuclear Power Plant Components • Service sections • Section II – Materials • Section V – Nondestructive Examination • Section IX – Welding and Brazing Qualifications
2015 ASME BPVC The ASME Boiler & Pressure Vessel Code (BPVC) establishes rules of safety governing the design, fabrication, maintenance and inspection of boilers and pressure vessels, power producingmachines (and associated subsystems) and nuclear power plant components.
PAGES
DISTRIBUTION
+
114
vs.
>16,000
in the original document
in 2013 code
IHS is your trusted source for 2015 ASME BPVC. Delivering to US, Canada & More than 100 Countries around the Globe
>92,000 Copies
COVERAGE INCLUDES
ORDER FROM IHS
2
Years
the change in publication cycles instituted after the 2013 release
6 Months
100
www.ihs.com/2015BPVC
Industrial and residential boilers
Pressure vessels
NOVEMBER
Years
2014
since the first issuance of boiler code Nuclear reactor components
Transport tanks
VOLUNTEERS
You can place your pre-order with IHS. No invoicing until BPVC ships
Multiple Formats Hardcopy, PDF Online, Interactive HTML, Secure Behind-the-Firewall
contributing to the code Length of time after issuance that the code becomes mandatory
800 6
Best Price Guarantee
Power Boilers
Heating Boilers
Section I: Power Boilers
Section IV: Heating Boilers
Order Online
Order Online
Provides requirements for all methods of construction of power, electric, and miniature boilers; high temperature water boilers, heat recovery steam generators, and certain fired pressure vessels to be used in stationary service; and power boilers used in locomotive, portable, and traction service. Rules pertaining to use of the single ASME certification mark with the V, A, M, PP, S, and E designators are also included.
Provides requirements for design, fabrication, installation and inspection of steam heating, hot water heating, hot water supply boilers, and potable water heaters intended for low pressure service that are directly fired by oil, gas, electricity, coal or other solid or liquid fuels. Rules pertaining to use of the single ASME certification mark with the H, HV, and HLW designators are also included.
Section VII: Care of Power Boilers
Section VI: Care and Operation of Heating Boilers
Order Online Provides guidelines to assist those directly responsible for operating, maintaining, and inspecting power boilers. These boilers include stationary, portable, and traction type boilers, but not locomotive and high-temperature water boilers, nuclear powerplant boilers (see Section XI), heating boilers (see Section VI), pressure vessels, or marine boilers. Guidelines are also provided for operation of auxiliary equipment and appliances that affect the safe and reliable operation of power boilers.
Order Online Covers operation guidelines applicable to steel and cast-iron boilers limited to the operating ranges of Section IV Heating Boilers. Section VI includes guidelines for associated controls and automatic fuel-burning equipment. Also included is a glossary of terms commonly associated with boilers, controls, and fuel-burning equipment. Related Standards: ASME Pipes & Fitting Set: ASME B16 Standards on Wrought and Forged Pipe Fittings and Flanges ASME B31.1: Piping ASME B31.3: Process Piping ASME PTC 25: Pressure Relief Devices ASME QAI-1: Qualifications for Authorized Inspection
Related Standards: ASME Pipes & Fitting Set: ASME B16 Standards on Wrought and Forged Pipe Fittings and Flanges ASME B31.1: Piping ASME B31.3: Process Piping ASME PTC 25: Pressure Relief Devices ASME QAI-1: Qualifications for Authorized Inspection
7
ASME NQA-1: Quality Assurance Program Requirements for Nuclear Facilities ASME PCC-1: Guidelines for Pressure Boundary Bolted Flange Joint Assembly ASME PCC-2: Repair of Pressure Equipment and Piping ASME PTC 25: Pressure Relief Devices ASME QAI-1: Qualifications for Authorized Inspection
Pressure Vessels Section VIII: Pressure Vessels Order Online Division 1 provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. Specific requirements apply to several classes of material used in pressure vessel construction, and also to fabrication methods such as welding, forging and brazing.
Fiber-Reinforced Plastic Pressure Vessels Section X: Fiber-Reinforced plastic Pressure Vessels Order Online
Division 1 contains mandatory and non-mandatory appendices detailing supplementary design criteria, nondestructive examination and inspection acceptance standards. Rules pertaining to the use of the single ASME certification mark with the U, UM and UV designators are also included.
Provides requirements for construction of a fiber-reinforced plastic pressure vessel (FRP) in conformance with a manufacturer’s design report. It includes production, processing, fabrication, inspection and testing methods required for the vessel. Section X includes three Classes of vessel design: Class I and Class III – qualification through the destructive test of a prototype; and Class II – mandatory design rules and acceptance testing by nondestructive methods. These vessels are not permitted to store, handle or process lethal fluids. Vessel fabrication is limited to the following processes: bag-molding, centrifugal casting and filament-winding and contact molding. Rules pertaining to the use of the single ASME certification mark with the RP designator are also included.
Division 2 requirements on materials, design, and nondestructive examination are more rigorous than in Division 1; however, higher design stress intensity values are permitted. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the single ASME certification mark with the U2 and UV designators are also included. Division 3 requirements are applicable to pressure vessels operating at either internal or external pressures generally above 10,000 psi. It does not establish maximum pressure limits for either Section VIII, Divisions 1 or 2, nor minimum pressure limits for this Division. Rules pertaining to the use of the single ASME certification mark with the U3 and UV3 designator are also included.
Related Standards: ASME Section V: Nondestructive Examination ASME B16.1: Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 ASME B16.5: Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard ASME B18. 22.1: Plain Washer
Related Standards: ASME Pipes & Fitting Set: ASME B16 Standards on Wrought and Forged Pipe Fittings and Flanges ASME B31.1: Piping ASME B31.3: Process Piping ASME QAI-1: Qualifications for Authorized Inspection
Construction of Nuclear Facility Components Section III: Rules for Construction of Nuclear Facility Components
Section XII: Transport Tanks
Order Online
Order Online
Provides general requirements which address the material, design, fabrication, examination, testing and overpressure protection of the items specified within each respective Subsection, assuring their structural integrity.
Provides requirements for construction and continued service of pressure vessels for the transportation of dangerous goods via highway, rail, air or water at pressures from full vacuum to 3,000 psig and volumes greater than 120 gallons. “Construction” is an all-inclusive term comprising materials, design, fabrication, examination, inspection, testing, certification, and over-pressure protection. “Continued service” refers to inspection, testing, repair, alteration, and recertification of a transport tank that has been in service. Rules pertaining to the use of the single ASME certification mark with the T, TD, and TV designators are included.
Division 1, Subsection NCA, which is referenced by and is an integral part of Division 1, Subsections NB through NG, and Division 2 of Section III, which covers quality assurance requirements, ASME product-certification marks, and authorized inspection for Class 1, 2, 3, MC, CS, and CC construction. DIVISION 1, SUBSECTIONS NB, NF, APP Subsection NB addresses items which are intended to conform to the requirements for Class 1 construction.
Related Standards: ASME Pipes & Fitting Set: ASME B16 Standards on Wrought and Forged Pipe Fittings and Flanges ASME B31.1: Piping ASME B31.3: Process Piping ASME FFS-1: Fitness-For-Service
Subsection NF addresses supports which are intended to conform to the requirements for Classes 1, 2, 3, and MC construction.
8
Nuclear In-Service
Subsection APP contains appendices, both mandatory and non-mandatory for Section III, Division 1 (Subsections NCA through NG), Division 2 and Division 3, including a listing of design and design analysis methods and information, plus Data Report Forms. These appendices are referenced by, and are an integral part of, Subsections NCA through NG, Division 2 and Division 3.
Section XI: Rules for In-service Inspection of Nuclear Power Plant Components Order Online Contains Divisions 1 and 3, in one volume, and provides rules for the examination, in-service testing and inspection, and repair and replacement of components and systems in light water cooled and liquid metal cooled nuclear power plants. Application of Section XI begins when the requirements of the “construction code” (e.g., Section III) have been satisfied.
DIVISION 1, SUBSECTIONS NC, ND Subsection NC addresses items, which are intended to conform to the requirements for Class 2 construction. Subsection ND addresses items, which are intended to conform to the requirements for Class 3 construction.
Section XI constitutes requirements to maintain the nuclear power plant while in operation and to return the plant to service, following plant outages, and repair or replacement activities. These rules require a mandatory program of scheduled examinations, testing, and inspections to evidence adequate safety. The methods of nondestructive examination to be used and flaw size characterization are also contained within this Section.
OTHER SUBSECTIONS AND DIVISIONS Subsection NE addresses items which are intended to conform to the requirements for Class MC construction. Subsection NF addresses the supports, which are intended to conform to the requirements for Classes 1, 2, 3, and MC construction.
Related Standards: ASME Pipes & Fitting Set: ASME B16 Standards on Wrought and Forged Pipe Fittings and Flanges ASME B31.1: Piping ASME B31.3: Process Piping ASME NQA-1: Quality Assurance Program Requirements for Nuclear Facilities ASME QAI-1: Qualifications for Authorized Inspection ASME RA-S: Standard for Level 1 / Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications
Subsection NG addresses structures, which are designed to provide direct support or restraint of the core (fuel and blanket assemblies) within the reactor pressure vessel. Subsection NH addresses Class 1 components, parts, and appurtenances which are expected to function even when metal temperatures exceed those covered by the rules and stress limits of Subsection NB and Tables 2A, 2B, and 4 of Section II, Part D, Subpart 1. Division 2 addresses concrete containment structures, pre-stressed or reinforced. These requirements are applicable only to those components that are designed to provide a pressure retaining or containing barrier.
Service Sections
Section II: Materials Order Online
Division 3 addresses the design and construction of the containment system of a nuclear spent fuel or high level radioactive waste transport packaging.
Part A covers Ferrous Material; Part B covers Nonferrous Material; Part C covers Welding Rods, Electrodes, and Filler Metals; and Part D covers Material Properties in both Customary and Metric units of measure.
Division 5 provides construction rules for high-temperature reactors, including both high-temperature, gas-cooled reactors (HTGRs) and liquid-metal reactors (LMRs).
Together, these four parts of Section II comprise a “service Code” to other BPVC Sections, providing material specifications adequate for safety in the field of pressure equipment. These specifications contain requirements for chemical and mechanical properties, heat treatment, manufacture, heat and product analyses, and methods of testing. Part A and Part B specifications are designated by SA or SB numbers, respectively, and are identical with or similar to those of specifications published by ASTM and other recognized national or international organizations. Part C specifications are designated by SFA numbers and are derived from AWS specifications.
Related Standards: ASME Pipes & Fitting Set: ASME B16 Standards on Wrought and Forged Pipe Fittings and Flanges ASME B36.10M: Welded and Seamless Wrought Steel Pipe ASME B36.19M: Stainless Steel Pipe ASME NQA-1: Quality Assurance Program Requirements for Nuclear Facilities ASME QAI-1: Qualifications for Authorized Inspection
9
Section V: Nondestructive Examination Order Online Non-destructive Examination is another “service Code” – containing requirements and methods for nondestructive examination which are referenced and required by other BPVC Sections. It also includes manufacturer’s examination responsibilities, duties of authorized inspectors and requirements for qualification of personnel, inspection and examination. Examination methods are intended to detect surface and internal discontinuities in materials, welds, and fabricated parts and components. A glossary of related terms is included.
Section IX: Welding, Brazing, and Fusing Qualifications Order Online Welding, Brazing, and Fusing Qualifications is another “service Code” – containing rules relating to the qualification of welding, brazing, and fusing procedures as required by other BPVC Sections. It also covers rules relating to the qualification and requalification of welders, brazers, and welding and brazing operators in order that they may perform welding or brazing in component manufacture. Welding, brazing and fusing data cover essential and nonessential variables specific to the welding, brazing or fusing process used.
Code Cases: Pressure Technology / Nuclear Order Online Starting with this 2015 Edition, the BPVC will be revised every two years. But what happens in the interim with new materials or alternative constructions? How does the BPVC keep current with the latest in technology and applications? Code Cases are approved actions by the BPVC Committees on these alternatives, intended to allow early and urgent implementation of any revised requirements. They are issued four times per year in two categories: Boiler and Pressure Vessels (CC-BPV) and Nuclear (CCNUC). Users may purchase individual publications at any time. Or they may subscribe to receive full sets of Code Cases as they are published for the duration of that BPVC edition’s cycle. This responsiveness to requests illustrates the unique openness and transparency of ASME’s code-development process-striving to reflect best-practices of industry, while contributing to safety for the general public. Related Standards: ASME Pipes & Fitting Set: ASME B16 Standards on Wrought and Forged Pipe Fittings and Flanges ASME B31.1: Piping ASME B31.3: Process Piping ASME NQA-1: Quality Assurance Program Requirements for Nuclear Facilities ASME QAI-1: Qualifications for Authorized Inspection API STD 1104: Welding of Pipelines and Related Facilities AWS D1.1/D1.1M: Structural Welding Code - Steel
10
Key Changes for the 2015 ASME BPVC A Guide to Key Changes The latest 2015 edition of the ASME BPVC marks the first revision in the new two-year revision cycle. Certificate holders find it easier to comply with Code changes due to the elimination of the Addenda and a reduction in the overall number of changes; also helping to accelerate adoption. Errata, Interpretations, and Code Cases will continue to be updated regularly and published online to online subscribers and in print to hardcopy purchases.
Reminder 2015 marks the first revision since the shift to a two-year revision cycle.
Also of important note, the 2015 Edition of Section III is the last edition in which Section III, Division 1, Subsection NH, Class 1 Components in Elevated Temperature Service, will be published. The requirements located within Subsection NH have been moved to Section III, Division 5, Subsection HB, Subpart B for the elevated temperature construction of Class A components. Significant updates have been incorporated into the 2015 ASME Boiler and Pressure Vessel Code (BPVC) and impact virtually everyone who uses and references the code. Ensure compliance and adopt the latest best practices before the new code goes into effect. An itemized list of changes for each section is available as supplemental documents and is listed with each BPVC Section on the IHS Standards Store.
Summary of Key Changes by Section Section I – Rules for Construction of Power Boilers
Section III – Rules for Construction of Nuclear Facility Components
Key changes continue to recognize the interests of boilers manufactured for use in steam locomotives, as well as electric immersion heater elements, watertube boilers, configuring a Section VIII fired pressure vessel with Section I boiler, and recognition of solar radiation as a heat source. Notable changes to:
A new, mandatory appendix was added to establish requirements for buried HDPE Class 3 piping, including material from various Code Cases and to reflect the Section IX provisions for fusing HDPE. Revisions to NB-3200 clarify the definition of “local primary membrane stress” and “local thin areas.” In a longstanding effort to update the piping seismic design criteria, changes have been made to provide design by analysis rules for reversing dynamic loads. NB-, NC- and ND- 3600 are being revised to improve stress indices C2r, K2r and stress intensification factors (SIF’s) for branch connections with r/R ≤ 0.5.
• • • •
Section I, Parts Fabrication Certificate Program Addition of Part PFE - Requirements for Feedwater Economizers Section I, Part PL Requirements for Locomotive Boilers Section I, Alternate Rules in Section I for the Design of Electric Immersion Heater Element Support Plates • PWT-12, Construction of Box Headers and Waterlegs • Preamble, Section I, Addition of Solar Heated Steam Generator
Additionally, extensive updates were made to Appendix W to add current EPRI, NRC, and other references, typical nuclear power plant environments, materials, design measures to reduce the susceptibility to environmental effects; amongst coverage for a number of other conditions.
Section II – Materials Continuing with the trend of prior editions, a number of changes were again made within Section II. More than 25 ferrous specifications were adopted or revised within Section II, Part A; and more than 10 nonferrous specifications were adopted or revised in Section II, Part B. Other key changes concentrated on Part D; revisions to Appendix 5 including:
Section IV - Rules for Construction of Heating Boilers Current provisions require all part fabricators to obtain separate ASME Certificates of Authorization under each section of the code; changes propose a program to permit organizations that fabricate parts, but do not perform or take design responsibility to also obtain ASME certifications. The new certificate program will also recognize authorization to fabricate parts for multiple Code Sections.
• The duration of creep tests for an alloy designed to operate in the time dependent regime has been extended; and at least one test from each heat lasting at least 10,000 hours is now required for an alloy to be approved for a Code Case. • For advanced alloys with metastable structures, creep test data lasting more than 30,000 hours is required to be made available to the committee. • Alloy producers are required to provide a comprehensive description of the metallurgical characteristics of the alloy. • Data requirements for filler metals and weldments have been made more explicit with respect to high-temperature data in complement to the base metal requirements.
New revisions for H Certificate Holders allow transfer of parts between manufacturing locations and reflect consistent wording to that already contained in Section I and VIII. Additionally for H Certificate Holders, etching would be an acceptable form for marking a boiler within the scope of Section IV. New revisions make safety valve sizing consistent with the requirements in Section I. And Mandatory Appendix 2 was revised to reflect the latest ASME, ASTM and DIN referenced standards.
11
Section V – Nondestructive Examination Reflecting new technologies, one new article addresses the use of acoustic pulse reflectometry (APR) to detect blockage, corrosion or other problems located on the internal surface of a tube and the other article addresses the use of guided wave ultrasonic testing (GWUT). A new Mandatory Appendix was added to describe the requirements for the examination of butt fusion welds in HDPE pipe using encoded pulse echo, phased array or Time of Flight Diffraction (TOFD) ultrasonic techniques. Fifteen ASTM reference standards related to Nondestructive Examination (NDE) have been adopted or revised within this Section.
Section VIII – Rules for Construction of Pressure Vessels In Division 1, notable changes include incorporating Code Case 2560 on overpressure protection by system design for pressure vessels in air, water and steam service. Additional revisions were made to clarify responsibilities of the manufacturer and authorized inspector (AI) with regards to review of calculations. In Division 2, a new clause was added with regards to corrosion fatigue that now provides guidance consistent with other international pressure vessel codes such as EN 13445 and PD5500. In addition, Code Case 2804 was incorporated to correct the calculation for forming strains in one piece heads.
Section X – Fiber-Reinforced Plastic Pressure Vessels The most important change in Section X is the adoption of Code Case 2820 which allows the use of oil and gas industry drilling fluids, or other general fluids, as the operating fluid in composite pressure vessels covered under this section.
Section XI – Rules for Inservice of Nuclear Power Plant Components Nonmandatory Appendix D was completely rewritten and is now titled “Conditioning of Welds that Require Ultrasonic Examination.” Nonmandatory Appendix A, Article A-3000 was also completely rewritten. Additional revisions clarify that “Analytical Evaluation” shall not be used to evaluate leakage and update the equations for calculating fracture toughness determination.
Section XII – Rules for Construction and Continued Service of Transport Tanks Several paragraphs are being revised to make them consistent with the requirements for pressure relief devices in Section VIII. Additional revisions help clarify definition of “Material Test Report” and “Dynamic Load Condition.”
Several changes were also made to Division 1 & 2, to ensure welding of cladding material is made by a manufacturer holding a Certificate of Authorization, clarify requirements for MDMT and impact testing, clarify tubesheet or flat head materials shall not be considered as an area of reinforcement for openings in adjacent shells or heads, updated requirements for tubesheet, and to clarify that toughness testing is mandatory for high yield materials. In Division 3, Numerous revisions were made to establish rules for the stamping and certification of rupture disks specifically for use in Division 3. Additional revisions were made on linear elastic analysis, Code Case 2579 incorporated regarding filament materials preimpregnated with resin (aka “prepreg material”), and to ensure that mechanical tests confirm that the material received a proper heat treatment.
Section IX – Welding and Brazing Qualifications Key revisions span new variables addressing the use of preplaced filler metal for Friction Stir Welding procedure qualification, the addition of electrofusion (EF) process for joining HDPE to Part QF – Plastic Fusing, and new guidance on conducting performance qualification tests that satisfies both ISO 9606 and ASME Section IX. Nine AWS reference standards will be updated to reflect the newer editions of these standards.
12
A Guide to Frequently Asked Questions The following are answers the commonly asked questions posed by users of the Code. The answers below have been provided by ASME for use in the IHS Fact Book on the ASME BPVC, BPVC related standards, single certification mark, and available ASME training courses. 1. When will the Code revisions be available, and when will the new revisions take effect or become mandatory? Code revisions may be used beginning with the date of issuance shown in the 2015 Edition. The revisions become mandatory six months after the date of issuance. 2. What are end user responsibilities with regard to the Code revisions? The revisions become mandatory six months after the date of issuance. All ASME Certificate Holders must revise their written QA manuals to reflect the new revisions published in the 2015 Edition. 3. Will ASME continue to publish Code Cases, Interpretations, and Errata? ASME will continue to update Code Cases, Interpretations, and Errata between new releases of the Code: a. Code Case Supplements specifically document approved actions by the BPVC Committees on new materials or alternative constructions, and are issued four times a year. Intended use is to allow early and urgent implementation of any revised requirements. b. Interpretations, responses to requests to clarify the application of an existing requirement will be published in the 2015 BPVC. Following publication of the 2015 Edition, interpretations will not be included in the edition; they will be issued in real time in ASME’s Interpretations Database at http://go.asme.org/Interpretations. This webpage also has several search tools allowing a user to view relevant historical BPVC interpretations issued in the past 30+ years. c. Errata, or approved editorial corrections to the standard, will be periodically posted on the ASME website and are accessible via the Standards Development Committee webpages. 4. How will errors in any of the text/tables, etc. be addressed if there are no agenda between revisions? Errors such as incorrectly published items or typographical or grammatical errors will be corrected as they are made known to the Committee. Once the Committee has verified the errors they will be corrected by errata and made available to the public.
Information regarding errata is published on the ASME Web site under the Boiler and Pressure Vessel Code Resources Page at: https://www.asme.org/about-asme/who-we-are/ standards/bpvc-resources. 5. Will the move to the two-year revision cycle affect accreditation? There will be no effect on accreditation or certification; however, Certificate Holders must still revise their written QA manuals to reflect new revisions published in the 2015 edition. 6. If a Code Case is issued on an “expedited basis,” how does the industry get quick access to it, i.e., not waiting until the next Code Cases Supplement? Code Cases may be used when they are approved by ASME. In order to obtain an approved Code Case before publication in a Supplement, please contact the ASME technical staff with the appropriate Code Case number or record number. 7. How can questions about the Code be submitted to the various Committees? In the front matter of every Code book is a section on “SUBMITTAL OF TECHNICAL INQUIRIES TO THE BOILER AND PRESSURE VESSEL COMMITTEE.” Please follow this guidance to avoid any delays in consideration. Inquiries for any Section of the Code can be submitted via the following website http://cstools.asme.org/Interpretation/ InterpretationForm.cfm. ASME accepts responsibility for only those interpretations issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals. 8. In what states has the Boiler Code been adopted? ASME is only responsible for preparing the requirements in the Code, and does not enforce these requirements from a legal standpoint. Enforcement of the Code is the responsibility of the jurisdictions that adopt the various Sections as part of their pressure equipment regulations. The National Board of Boiler and Pressure Vessel Inspectors (NBBI) publishes the “National Board Synopsis (NB-370),” which contains a brief outline of the laws for the jurisdictions in the US and Canada as well as contact information for the respective Chief Inspectors in those jurisdictions.
13
9. Where can I find a list of qualified inspectors? Third-party inspection is required for objects bearing the ASME Certification Mark. Please review the requirements of various Sections of the Code to determine the extent of the inspections and the duties of the Authorized Inspector. An unofficial list of “Organizations Holding Authorized Inspection Agency Certificates of Accreditation” is available on the ASME website.
12. Are there training or professional development courses available on how to use and apply BPVC, the applicable revisions and related standards? ASME has developed more than 60 Code-related and standards related training courses and course completions can be applied to professional development hours (PDH’s). View the complete list of ASME training, development and code courses available on the IHS website.
10. How does a manufacturer become accredited to use the ASME Certification Mark?
13. How can I get involved in future development of the ASME Boiler and Pressure Vessel Code?
Beginning January 1, 2014, ASME moved to a single certification mark with a certification designator to certify that a company’s products, services and quality systems comply with the BPVC. The certification program is designed to enhance public safety and facilitate international commerce. Please follow the application process, completing the required forms, on the ASME Website for Certification and Accreditation Programs.
Volunteering is the life-blood of the BPVC and participants not only help to improve the Code, but also benefit from early awareness, professional benchmarking and peer-topeer networking in a consensus environment. The BPVC Committee meets in person four times per year during the ASME Boiler Code Weeks. It is during these code weeks that the Committee considers consider requests for interpretations, revisions, and to develop new rules for future Code revisions..
11. Does the single ASME certification mark include the “R” stamp for repaired tanks? The “R,” “VR,” and “NR” stamp accreditation programs are administered by the National Board of Boiler and Pressure Vessel Inspectors (NBBI), not ASME. For more information on becoming accredited, please visit the Stamps and Marks page on the NBBI website.
14
Certification Mark and Standard Packages Transition to a Single Certification Mark Not long after first publishing the BPVC, ASME began a certification program to certify that companies’ products, services, and quality systems comply with the Code. Today, more than 6,000 companies in 75 countries are certified by ASME as being in compliance with the BPVC. Until recently, certified equipment would bear one of 28 ASME Code symbol stamps that would indicate that the stamped item conformed to the latest edition of the BPVC. Each type of stamp included a symbol that indicated what type of certification it covered, such as for a power boiler, heating boiler, pressure vessel, or valve. In 2012, ASME rolled out the single certification mark. Instead of a symbol indicating the type of certification, the mark includes a small certification designator. Otherwise, all types of equipment will receive the same stamp. The single certification mark is being implemented over a three-year period. Starting on January 1, 2014, only the new mark may be used, except for certification to Section III of the Code (nuclear components). On January 1, 2015, the new mark also must be used for Section III items as well.
The many different ASME BPVC certification marks have been replaced by a single certification mark that is used in conjunction with a certification designator.
Boiler & Pressure Vessel Certification Standards Packages Power Boilers
Heating Boilers
Pressure Vessels
Pressure Vessels
Section I
Section IV
Section VIII Division 1
Section VIII Division 2
A – Assembly of Power Boilers
H – Heating Boilers
U – Pressure Vessels
E – Electric Boilers
HLW – Lined Potable Water Heaters
U2 – Pressure Vessels (Alternative Rules for Pressure Vessels)
M – Miniature Boilers
HV – Heating Boiler Safety Valves
UD – Pressure Vessel Pressure Relief Devices
PP – Power Piping
UM – Miniature Pressure Vessels
S – Power Boilers
UV – Pressure Vessel Pressure Vessel Relief Valves
V – Boiler Pressure Relief Valves
Pressure Vessels
Reinforced Plastic Vessels
Transport Tanks
Nuclear Components
Section VIII Division 3
Section X
Section XII
Section III
U3 – High Pressure Vessels
RP – Fiber-Reinforced Plastic Vessels
T – Transport Tanks
N - Vessels, pumps, valves, piping systems, storage tanks, core support structures, concrete containments, and transport packaging
UV3 – High Pressure Vessel Pressure Relief Valves
TD – Transport Tanks Pressure Relief Devices TV – Transport Tanks Pressure Relief Valves
NA - Field installation and shop assembly of all items NPT - Parts, appurtenances, welded tubular products, and piping subassemblies
IHS has the standards packages you need for gaining stampholder certification.
NS - Supports NV - Pressure relief valves N3 - Transportation containments and storage containments
View standards. 15
BPVC Related Content IHS is the premier provider of global market, industry and technical information, analysis and expertise across virtually every level of any operation and enterprise. With over one million engineering specifications, standards, manuals and publications from every major publisher around the world, IHS is your source for critical engineering standards. Order Online.
Bundles and Sets ASME B31.1 & B31.3 Set ASME B31.8 Piping Set ASME B31 Series ASME B16 Pipes & Fittings ASME B1.20 Pipe Threads ASME Energy Assessment ASME BPVC Books Online ASME Bioprocessing Set Regional Boiler & Pressure Vessel Products AD 2000 Code (DE) CSA B51 (CA) AFNOR NF EN 13445 (FR) BS EN 13445 Series (UK) BS PD 5500 (UK) DIN EN 13445 Series (DE) JIS B 8200 Series (JP) JIS PRESSURE VESSELS HDBK (JP) Guides and Handbooks ASME Companion Guide V1 ASME Companion Guide V2 ASME Design & Analysis ASME Power Boilers Guide ASME Guidebook for the… ASME B31.3 Guide Pressure Vessel Handbook Inspection Codes & Standards NBBI NB 23 (NBIC) API 510 API RP 572 API RP 573 Welding API STD 1104 AWS D1.1/D1.1M Inspection Codes & Standards NBBI NB 23 (NBIC) API 510 API RP 572 API RP 573 Power & Process Piping NBBI NB 23 (NBIC) API 510 API RP 572 API RP 573
Inspection Codes & Standards ASME B31.1 ASME B31.3 Pipes & Fittings ASME B16.5 ASME B16.9 ASME B16.11 ASME B16.34 ASME B16.47
PTB-5-2013 Section VIII Division 3 Example Problem Manual Author: Daniel T. Peters, P.E. Kevin Haley, Ashwin Padmala PTB-6-2013 Guidelines for Strain Gaging of Pressure Vessels Subjected to External Pressure Loading in the PVHO-1 Standard Author: Lawrence J. Goland PTB-7-2014 Guidelines for Shell-and-Tube Heat Exchangers: Part UHX of Section VIII Division 1
Bioprocessing ASME BPE ASME B31.3 ASME B46.1 ASME PTC 19.3 TW
Author: Francis Osweiller PTB-8-2014 Procurement Guidelines for Metallic Materials Author: Elmar Upitis
Energy Assessment ASME EA-1 ASME EA-2 ASME EA-3 ASME EA-4 ASME EA-1G ASME EA-2G ASME EA-3G ASME EA-4G
PTB-9-2014 ASME Pipeline Standards Compendium
Training Modules ASME BPVC-V Training ASME BPVC-IX Training ASME BPVC-III-1 Training More Training Courses Pressure Technology Book Publications PTB-1-2014 ASME Section VIII Division 2 Criteria and Commentary Author: David A. Osage, P.E. PTB-2-2009 Guide to Life Cycle Management of Pressure Equipment Integrity Author: J.R. Sims, Jr. PTB-3-2013 Section VIII Division 2 Example Problem Manual Authors: James C. Sowinsky, P.E., David A. Osage, P.E. Robert G. Brown, P.E. PTB-4-2013 Section VIII Division 1 Example Problem Manual Authors: James C. Sowinsky, P.E., David A. Osage, P.E.
16
Now available at IHS—TH Hill DS-1 The global standard for drilling equipment specifications and quality assurance. Order today
ASME Boiler and Pressure Vessel Code
Print
Online
Price
Request Quote
Document
Title
ASME BPVC Set
Complete Set of the ASME Boiler and Pressure Vessel Code.
$14,500.00 $15,180.00
ASME BPVC Set-B
Complete ASME Boiler and Pressure Vessel Code - Plus 33 ASME BPVC Binders
ASME BPVC-Binder
Single ASME BPVC Binder
ASME BPVC-Binder IHS
ASME-Approved Boiler and Pressure Vessel Code Binder ($20 Value)
$20.00 FREE
ASME BPVC-I
Section I: Rules for Construction of Power Boilers
ASME BPVC-I Spanish
Sección I: Reglas Para la Construcción de Calderas de Energía (2010 edition)
$220.00
ASME BPVC-II A
Section II: Materials - Part A - Ferrous Material Specifications
$630.00
ASME BPVC-II B
Section II: Materials - Part B - Nonferrous Material Specifications
$630.00
ASME BPVC-II C
Section II: Materials - Part C - Specifications for Welding Rods, Electrodes, and Filler Metals
$725.00
ASME BPVC-II D
Section II: Materials - Part D - Properties (Customary)
$630.00
ASME BPVC-II DM
Section II: Materials - Part D - Properties (Metric)
$630.00
ASME BPVC-II Set
Section II: Material Set - 4 Volumes (Contains ASME BPVC-IIA, ASME BPVC-IIB, ASME BPVC-IIC, ASME BPVC-IID) BUY THE SET AND SAVE 10%
$2,615.00
ASME BPVC-II Set Metric
Section II: Material Set - 4 Volumes (Contains ASME BPVC-IIA, ASME BPVC-IIB, ASME BPVC-IIC, ASME BPVC-IIDM) *Metric* BUY THE SET AND SAVE 10%
$2,615.00
ASME BPVC-III NCA
Section III: Rules for Construction of Nuclear Facility Components - Subsection NCA - General Requirements for Division 1 and 2
$485.00
ASME BPVC-III NB
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Subsection NB - Class 1 Components
$485.00
ASME BPVC-III NC
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Subsection NC - Class 2 Components
$485.00
ASME BPVC-III ND
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Subsection ND - Class 3 Components
$485.00
ASME BPVC-III NE
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Subsection NE - Class MC Components
$450.00
ASME BPVC-III NF
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Subsection NF - Supports
$450.00
ASME BPVC-III NG
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Subsection NG - Core Support Structures
$425.00
ASME BPVC-III NH
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Subsection NH - Class 1 Components in Elevated Temperature Service
$450.00
ASME BPVC-III APP
Section III: Rules for Construction of Nuclear Facility Components - Division 1 - Appendices
$535.00
ASME BPVC-III-1 Set
ASME BPVC Section III Division 1 Set - (Contains Subsections NCA,NB, NC, ND, NE, NF, NG, NH and Appendices) BUY THE SET AND SAVE 10%
ASME BPVC-III-2
Section III: Rules for Construction of Nuclear Facility Components - Division 2 - Code for Concrete Containments
$510.00
ASME BPVC-III-3
Section III: Rules for Construction of Nuclear Facility Components - Division 3 - Containments for Transportation and Storage of Spent Nuclear Fuel and High Level Radioactive Material and Waste
$510.00
ASME BPVC-III-5
Section III: Rules for Construction of Nuclear Facility Components - Division 5 - High Temperature Reactors
$510.00
ASME BPVC-III Set
Section III: Rules for Construction of Nuclear Power Plant Components Set - 12 Volumes (Contains All ASME BPVC Section III) BUY THE SET AND SAVE 10%
ASME BPVC-IV
Section IV - Rules for Construction of Heating Boilers
$420.00
ASME BPVC-V
Section V - Nondestructive Examination
$470.00
ASME BPVC-VI
Section VI - Recommended Rules for the Care and Operation of Heating Boilers
$250.00
ASME BPVC-VII
Section VII - Recommended Guidelines for the Care of Power Boilers
$250.00
ASME BPVC-VIII-1
Section VIII - Rules for Construction of Pressure Vessels Division 1
$640.00
ASME BPVC-VIII-2
Section VIII - Rules for Construction of Pressure Vessels Division 2 - Alternative Rules
$640.00
ASME BPVC-VIII-3
Section VIII - Rules for Construction of Pressure Vessels Division 3 - Alternative Rules for Construction of High Pressure Vessels
$575.00
ASME BPVC-VIII Set
Section VIII - Pressure Vessels Set - 3 Volumes (Contains ASME Section VIII - Division 1, Division 2 and Division 3) BUY THE SET AND SAVE 10%.
$415.00
$4,250.00
$5,780.00
$1,855.00
ASME BPVC-IX
Section IX - Welding and Brazing Qualifications
ASME BPVC-X
Section X - Fiber-Reinforced Plastic Pressure Vessels
$375.00
ASME BPVC-XI
Section XI - Rules for Inservice Inspection of Nuclear Power Plant Components
$635.00
$480.00
ASME BPVC-XII
Section XII - Rules for Construction and Continued Service of Transport Tanks
$425.00
ASME BPVC-CC-BPV
BPVC Code Cases: Boilers and Pressure Vessels
$640.00
ASME BPVC-CC-NC
BPVC Code Cases: Nuclear Components
$640.00
Save 10% All Year Round on Standards. Visit global.ihs.com/deposit_acct.cfm for more information.
17
Unique Online Solutions
Improve Usability, Collaboration and Efficiency ASME BPVC: the must-have safety code for pressure integrity for inspectors, engineers and stamp holders. Eliminate digging through paper references and focus on work that matters.
Hardcopy + Free Binders
Only IHS brings you advanced ASME BPVC capabilities:
Online Searchable PDF
• Anytime, anywhere access on desktop & mobile devices • Powerful search for BPVC with redline version comparison and quick links for 3,500 cross references
1010101 0101010 1010101
Interactive HTML with Redlines (IHS Exclusive)
• Add bookmarks and annotations on the fly • ASME electronic stress tables • Errata, interpretations and special notices included
Behind-the-Firewall Integration (IHS Exclusive)
To place an order, visit global.ihs.com. Call, Fax or Mail Americas
Asia Pacific
Europe, Middle East & Africa
+1 800 854 7179 +1 303 397 7956
+852 2368 5733
+44 1344 328039
+1 303 397 2740
+852 2368 5269
+44 1344 328005
[email protected] Attn: Bill Hughes
[email protected] Attn: Grace Li
[email protected]
IHS 15 Inverness Way East Englewood, CO 80112 United States
IHS Hong Kong Ltd. 8/F, No. 1 Chatham Road South Tsim Sha Tsui, Kowloon HONG KONG
IHS / EMEA (Europe, Middle East, Africa) Willoughby Road Bracknell Berkshire, RGl2 8FB United Kingdom
To download an electronic copy of the 2015 IHS ASME BPVC Fact Book, visit www.ihs.com/asmebpvcfactbook. 18
Increase Your Engineering Efficiency with ASME Assessment-based Courses Are you getting all you can out of the ASME BPVC? Today’s engineering leaders must close the knowledge gaps, transfer knowledge, and ready new engineers as quickly as possible. Increasing the efficiency of engineering operations in this way can benefit project schedules, reduce errors and rework, and allow teams to focus their efforts on value-added initiatives.
Each course is a topical, short-length and affordable self-study module that includes end-of-module assessment tests. In total, there are more than 60 ABC’s available: • Professional instruction by industry experts • Most code courses developed and delivered by ASME Code Committee members
Further, well-trained engineers are better equipped to handle every day issues, complete projects on time and on budget, and be aware of current methods and practices. Increased contribution, employee satisfaction, and managing a team of certified professional engineers add to the benefits.
• Convenient self-study modules • Continuing Education Units (CEUs) and/or Professional Development Hours (PDHs) awarded • Options to administer training programs through your organization’s LMS
ASME Assessment-based Courses are a trusted, valued solution for engineers and technical professionals, fulfilling ASME’s goal to help individuals expand their knowledge and organizations to develop their core human assets.
Browse the courses available on the IHS store or contact your local office for more information 19
Don’t just know. Be in the know. Introducing IHS Engineering360. The new online destination for all things engineering. News and analysis. Product and supplier search capabilities. Research and reference collections. Online forums and discussion groups. These are just a few of the things that make the new IHS Engineering360 an essential source of intelligence that every engineer needs. Use it to find answers, solve problems, improve product quality and keep abreast of what’s going on in your industry right now.
Visit engineering360.com now, and be in the know.
About IHS IHS (NYSE: IHS) is the leading source of information, insight and analytics in critical areas that shape today’s business landscape. Businesses and governments in more than 150 countries around the globe rely on the comprehensive content, expert independent analysis and flexible delivery methods of IHS to make high-impact decisions and develop strategies with speed and confidence. IHS has been in business since 1959 and became a publicly traded company on the New York Stock Exchange in 2005. Headquartered in Englewood, Colorado, USA, IHS is committed to sustainable, profitable growth and employs about 8,800 people in 32 countries around the world.
Limited Time Offer Save 10% on Additional Standards
Need to update your non-BPVC standards? Now is the perfect time. Add standards to your BPVC order and save an additional 10% on all non-BPVC standards! To take advantage of this offer, reference promotional code P5520 when you speak with your local sales office.
Americas
Asia Pacific
Europe, Middle East & Africa
Tel: +1 800 854 7179 +1 303 397 7956 Fax: +1 303 397 2740 Email:
[email protected]
Phone: +852 2368 5733 Fax: +852 2368 5269 Email:
[email protected]
Phone: +44 1344 328040 Fax: +44 1344 328005 Email:
[email protected]
7335-1114JK