CURRICULUM VITAE [PDF]

University of Guilan, Po Box 3756, RASHT, IRAN. Home Address: Lakanshahr, Guil village, RASHT, IRAN. Telephone: IRAN. (0

7 downloads 4 Views 288KB Size

Recommend Stories


Curriculum Vitae Curriculum Vitae
You often feel tired, not because you've done too much, but because you've done too little of what sparks

CURRICULUM VITAE
Just as there is no loss of basic energy in the universe, so no thought or action is without its effects,

CURRICULUM VITAE
Everything in the universe is within you. Ask all from yourself. Rumi

CURRICULUM VITAE
You can never cross the ocean unless you have the courage to lose sight of the shore. Andrè Gide

CURRICULUM VITAE
Don’t grieve. Anything you lose comes round in another form. Rumi

CURRICULUM VITAE
If you feel beautiful, then you are. Even if you don't, you still are. Terri Guillemets

CURRICULUM VITAE
Silence is the language of God, all else is poor translation. Rumi

CURRICULUM VITAE
No amount of guilt can solve the past, and no amount of anxiety can change the future. Anonymous

CURRICULUM VITAE
Respond to every call that excites your spirit. Rumi

CURRICULUM VITAE
Before you speak, let your words pass through three gates: Is it true? Is it necessary? Is it kind?

Idea Transcript


CURRICULUM VITAE PERSONAL DETAILS: Name:

Nader Nariman-zadeh

Professor Dept. of Mechanical Eng. Engineering Faculty, University of Guilan, Po Box 3756, RASHT, IRAN

Home Address:

Telephone:

E-mail address:

Lakanshahr, Guil village, RASHT, IRAN

IRAN

(0098) 13 336690274-7(Office)

IRAN

(0098) 13 33770708(Home)

[email protected], [email protected]

Date of birth:

29 January, 1960.

Nationality:

Iranian.

Status:

Married, 2 children.

ACADEMIC QUALIFICATIONS: 1986

MSc degree in Mechanical Engineering, Tehran University, Tehran, Iran.

MSc project: " A general computer program for kinematic analysis of all planar mechanisms".

1993

National competition, Iran Award: PhD scholarship in Tehran University.

1993

National competition, Iran Award: PhD scholarship in UK.

1996

PhD degree in Intelligent Control of Robotic Manipulators from University of Salford, Salford, UK.

SUMMARY OF INDUSTRIAL/ACADEMIC EXPERIENCE: 1985-1986

As a mechanical engineer in Tabriz Thermal Power Plant, TAVANIR Co., Ministry of Energy, Tehran, Iran.

1987-1990

Lecturer (full time) in AIT ( Abadan Institute of Technology, National Iranian Oil Company), Ahwaz, Iran teaching in Mechanical Engineering Department the following courses:

Design of Machine Elements. Dynamics of Machinery. Technical Drawing. Physics of Mechanics. Supervision of undergraduate projects.

Lecturer (part time) in Chamran University (Jondishapoor), Ahwaz, Iran teaching in Mechanical Engineering Department the following courses:

Design of Machine Elements Dynamics of Machinery

Educational Consultant (part time) in the Ahwaz Complex Steel Group, Ahwaz, Iran

Mechanical Engineering Consultant (part time) in the Kavian Heavy Mill Factory, Ahwaz, Iran.

1990-1993

Lecturer (full time) in Guilan University, Rasht, Iran teaching in Mechanical Engineering Department the following courses:

Dynamics Statics

Technical Drawing 1993-1994

Laboratory demonstrator in Engineering Dynamics (First year and third year) in the Department of Aeronautical, Mechanical, and Manufacturing Engineering, The University of Salford, England.

1993-1996

PhD Student in the University of Salford, England.

1996-1997

Senior Research Assistant in the field of Intelligent Control Systems at the Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong, Pokfulam Rd., Hong Kong .

Lecturer (part time) at the Department of of Industrial and Manufacturing Systems Engineering, The University of Hong Kong, Pokfulam Rd., Hong Kong teaching the following courses:

Robotics Welding 1997-

Assistant Professor, (Associate Professor from 2002) Mechanical Engineering Dept., Guilan University teaching following courses:

Dynamics Advanced Dynamics Control

Computer-Aided Design (Optimization) Advanced Numerical Methods (MSc course) Selected Topics in Fuzzy-Logic Control and Modelling (MSc course) Advanced Linear Control (MSc course) Optimal Control (PhD course) Nonlinear Control (PhD course) Optimization (PhD Course) Supervision of undergraduate projects

Supervision of post-graduate projects (MSc and PhD).

1997-2002

Head of Mechanical Engineering Department

2002-2003

Dean of Engineering Faculty

2003-2004

Visiting Associate Professor, Sabbatical at Dept. of Computer Science, The University of Birmingham, UK.

2004-2007

Vice President in Research & Technology

RESEARCH GRANTS: 1) Evolutionary and non-evolutionary Methods of Optimisation in Mechanical Engineering, (completed) Research granted by Guilan University.

2) Application of Soft Computing to the Modelling of Time-series Behaviour of Complex Processes, Research granted by Finance and Programme Organization.

COMPUTER PROGRAMMING SKILLS: FORTRAN, Basic, C, MPL for parallel computing, Codas (Control simulation), Matlab, WordPerfect and Word.

Professional activities: Member of International Programme Committee, IWIM 2007, Cz Member of International Programme Committee, INISTA 2005-2010,Turkey Member of International Programme Committee, IASTED, Robotics and Applications 2003-2010, Canada Member of ASME Editorial Board, The Open Mechanical Engineering Journal, Bentham Pub, http://www.bentham.org/open/tomej/EBM.htm Editorial Board, Moddares Journal of Mechanical Engineering, Tehran, IRAN

PUBLICATIONS: Conference papers-English

1994

"Genetic Design of Computed-torque Controllers for Robotic Manipulators", (with Prof. B. Porter and Dr. B A Sangolola), Proc, IASTED international Conference on Systems and Control Lugano, Switzerland, June 1994.

1995

"Genetic Design of Computed-torque/Fuzzy-logic Controllers for Robotic Manipulators", (with Prof. B. Porter) Proc. 10th IEEE International Symposium on Intelligent Control, Monterey, USA Aug., 1995.

1995

"Genetic

design

of

Fuzzy-logic

Controllers

for

Robotic

Manipulators", (with Prof. B. Porter), Proc. IEEE International Conference on Evolutionary Computing, Perth, Australia, Nov., 1995.

1996

"Genetic Rule Induction In the Design of Computed-Torque/FuzzyLogic Controllers for Robotic Manipulators", (with Prof. B. Porter)11th IEEE Int. Symp. on Intelligent Control, Dearborn, USA, September 1996.

1996

"Practical Implementation of Genetically Designed ComputedTorque/Fuzzy-Logic Controllers for Robotic Manipulators", (with

Prof. B. Porter) 5th IEEE Int.

Conf. on Fuzzy Systems, New

Orleans, USA, September 1996.

1996

PhD Thesis, "Genetic Design of Controllers for Robotic Manipulators", The University of Salford, Salford, UK.

1997

“Genetic Design of Fuzzy-logic Controllers for Manufacturing Systems”, (with Prof. B. Porter), Proc. IFAC Conf. On Control of Industrial Systems, May, 1997, Belfort, France.

1997

“Evolutionary Robustification of Fuzzy-Logic Controllers for Manufacturing Systems”, (with Prof. B. Porter), World Manufacturing Congress (WMC ’97), November 18-21, 1997, Auckland, New Zealand

1998

Solution of Some Classical Job-Shop Scheduling Problems Using Evolution Strategies”, (with Professor B Porter), WAC’ 98, May 10-14, 1998., Anchorage, Alaska, USA.

1998

Evolution Strategies in Flow-Shop Sequencing, (with Professor B Porter), WAC’ 98, May 10-14, 1998, Anchorage, Alaska, USA.

2000

Genetic Identification of Dynamical Parameters in Computed-Torque Controllers for Robotic Manipulators, (with Dr M Darvizeh), Int. Scientific

Conf., 70th Anniversary of Astrakhan State Technical University, Apr.24-27, 2000, Russia.

2000

Evolution Strategies in the Design of PID Controllers, (With Mr. M Mosafer), Intelligent Systems & Applications ISA’ 2000, Intelligent Systems and Applications, Dec. 12-15, 2000, Wollongong, Australia.

2001

GMDH-type Neural Network Modelling of Explosive Cutting Process of Plates using Singular Value Decomposition”, (with Dr. A. Darvizeh and Mr. H. Gharababei), 15th European Simulation Multiconference ESM2001, Prague, 2001.

2001

GMDH-type Neural Network Modelling of Explosive Welding Process of Plates using Singular Value Decomposition”, (with Dr. A. Darvizeh and Mr. H. Gharababei), in N. Mastorakis, V. Mladenov, B. Suter, and L.J. Wang, eds. “Advances in Scientific Computing, Computational Intelligence and Applications” pp. 147-153, WSES Press, 2001.

2001

Design of Fuzzy Systems for the Modelling Explosive Cutting Process of Plates using Singular Value Decomposition”, (with Dr. A. Darvizeh), in Nikos Mastorakis, ed., “Advances in Fuzzy and Evolutionary Computation”, pp. 161-166, WSES Press, 2001.

2001

RBFN’s Modelling of Explosive Cutting Process of Plates Using Hybrid Genetic Algorithms”, (with Dr. A. Darvizeh), International ICSC-NAISO

Congress on Computational Intelligence: Methods and Applications, CIMA2001, Bangor, UK, 2001.

2002

Genetic Algorithm and Singular Value Decomposition in the Design of Fuzzy Systems for the Modelling of Explosive Cutting Process”, (with Dr. A. Darvizeh and Mr. F. Oliaei), in Ales Grmela and Nikos E. Mastorakis, eds., Advances in Intelligent Systems, Fuzzy Systems, Evolutionary Computation, pp. 72-77, WSEAS Press, 2002.

2002

“Evolutionary Design of GMDH-Type Neural Networks Using Singular Value Decomposition for the Modelling of Process Parameters of Explosive Cutting Process”, (with A. Darvizeh and G.R. Ahmad-zadeh), First International Conference On Inductive Modelling, ICIM’2002, Lviv, Ukraine, May 20-25, 2002.

2003

Modelling of Explosive Welding Process using GMDH-type Neural Networks and Genetic Algorithms, (with A. Darvizeh and G. R. Ahmadzadeh), IASTED International Conf. on Applied Informatics 2003, Innsbruck, AIA 2003, Austria, February 10 -13, 2003.

2003

Identification Of Dynamical Parameters Of Robotic Manipulators Using Singular Value Decomposition (with Ahmad Bagheri and Mina Khoshnejad), Eurosis Industrial Simulation Conf., ISC’03, Valencia, Spain, June 2003.

2003

Design Of Anfis Networks Using Hybrid Genetic And Svd Methods For Modelling Of Explosive Cutting Process (With A. Darvizeh, M.H. Dadfarmai), Ampt 2003, Dublin, Ireland, 2003.

2004

Stiffness modelling of rubber engine mounts by polynomial neural networks and genetic algorithms, (with Marzbanrad, J., and Jamali, A.), European Simulation & Modelling 2004 (ESM’2004), 25-27 October 2004, Paris, France.

2005

Turbulence Intensity Modelling of In-Cylinder Flow Using Genetically Designed GMDH Neural Network, (with K. Atashkari, A. Jamali), INISTA 2005 International Symposium on Innovations in Intelligent Systems & Applications, June 15-18, 2005, Turkey.

2005

Evaluation of Mechanical Properties of Carbon/Epoxy Composites Using Group Method Data Handling Neural Network, (with H. Haftchenari, A. Jamali), 5th Canadian International Composites Conference 16-19 August 2005, Canada.

2005

Identification of the Dynamical Parameters of a 2-Robot using ANFIS, (with R. Yosefi-moghadam, A. Bagheri, G. Haraj), International Conference of Mechatronics & Automation, IEEEICAM 2005.

2005

Optimal Design of ANFIS Networks Using Genetic Algorithm And SVD for Modeling of Vibration of Rack-Stacker Robot, (with A. Bagheri, S. Khezri), INISTA 2005 International Symposium on Innovations in Intelligent Systems & Applications, June 15-18, 2005, Turkey.

2006

Reliability-Based Pareto Optimum Design of Robust Compensators for a Dynamic System with Parametric Uncertainty, (with Amir Hajiloo, Ali Jamali, Ahmad Bagheri, Abolfazl Darvizeh, A Alasti), European Simulation Modelling 2006, 23-25 Oct. 2006, Toulouse, France.

2006

Multi-Objective Pareto Optimization of Axial Compressors Using Genetic Algorithms, (with N Amani-fard, A Jamali, M Farahani, R Farzanehkari), 10th WSEAS International Conf. on Computers, Athens, pp 878-883.

2006

Experimental - Based Modeling and Pareto Optimization of Indirect Injection Diesel Engines, European Simulation and Modelling ESM’06, (with K Atashkari, A jamali, I Celikton), Toulouse, France.

2006

Pareto Optimization of Energy Absorption of Square Aluminium Columns Using Multi - Objective Genetic Algorithms, (with A Jamali, A Darvizeh)

14th Annual (International) Mechanical Engineering Conference, Isfahan, Iran.

2006

Inverse Modeling of Multi - Objective Thermodynamically Optimized Turboject Engines Using GMDH & GA, (with A jamali, K Atshkari, A Pilechi) 14th Annual (International) Mechanical Engineering Conference, Isfahan, Iran.

2006

Modeling & Multi - Objective Optimization of a Variable Valve - Timing Spark - Ignition Engine Using Neural Networks & GAs (with A khalkhali, K Atashkari, A Jamali, Golcu) 14th Annual (International) Mechanical Engineering Conference, Isfahan, Iran.

2007

Pareto Genetic Design of GMDH-type Neural Networks for Nonlinear Systems, (with A Jamali), IWIM’07, Prague, Czech Rep. THE BEST PAPER OF THE CONFERENCE.

2007

Multi-objective Optimization of a SI Engine Operating on Hydrogen as a Supplementary Fuel using Genetic Algorithm, (with K Atashkari, A Hajiloo) INISTA 2007, Istanbul Turkey.

2007

Robust and Reliability-Based Pareto Optimum Design of PID Controllers for Systems with Parametric Uncertainty, (with A hajiloo, A jamali), INISTA 2007, Istanbul, Turkey

2008

Robust Pareto Design of GMDH-type Neural Networks for Systems with Probabilistic Uncertainties, (with F. Kalantary, A. Jamali, F. Ebrahimi), International Conference on Inductive Modelling ICIM’2008, September 15– 19, 2008, Kyiv, Ukraine

2009

Pareto Optimal Synthesis of a Curve-Scribing Mechanism for Prescribed Finite Motion, (with M. Felezi, J. Rezapour, A. Jamali), INISTA 2009, Trabzon, Turkey.

2009

Pareto Optimal Parametric Analysis of a Non-Linear Problem by MLPG, (with M. Mahmoodabadi, J. Rezapour, A. Bagheri), INISTA 2009, Trabzon, Turkey.

2009

Modeling and Control of SI Engines Air-Fuel Ratio by Ensemble of Model Predictive Control, Radial Basis Function Neural Network, and Genetic Algorithms, (with H. Nikpey, K. Atashkari, A. Hajiloo, S. Besarati), ), INISTA 2009, Trabzon, Turkey.

2009

Modeling and Optimization of a PEM Fuel Cell Base on Generalized SteadyState Electrochemical Model, (with A.Shokouhi and M Naghashzadegan), ISME 2010, University of Tehran, 2009, Tehran, Iran

2010

Fuzzy Threshold Values in The Pareto Robust Design of Controllers for Probabilistic Uncertain Systems, International MultiConference of Engineers and Computer Scientists 2010 (IMECS 2010), March 2010, Hong Kong

2010

Modeling and Multi-Objective Optimization of Backward-Curved Centrifugal Fans Using CFD and Neural Networks (H. Safikhani, J. Rezapour, A. Nourbakhsh, GH.R. Zare’a Pour, N. Nariman-Zadeh), INISTA 2010,21-24 June, 2010, Kayseri, Turkey

2010

Optimal Robust Fractional Order PID Controller Design for Systems with Parametric Uncertainties using Multi Objective Uniform Diversity Genetic Algorithm (MUGA), (Amir Hajiloo, A. Moeini, Nader Nariman-zadeh, Ali Barootiha), INISTA 2010,21-24 June, 2010, Kayseri, Turkey

2010

Pareto Optimum Design of Sliding Mode Controllers for Robotic Manipulators using a Multi-Objective Uniform-Diversity Genetic Algorithm (MUGA) (Amir Hajiloo, Nader Nariman-zadeh, Ahmad B. Rad, Mahmood Samadi), ), INISTA 2010,21-24 June, 2010, Kayseri, Turkey

2010

Pareto Optimal Robust Synthesis of Four-Bar Mechanisms with Probabilistic Uncertainties using a Multi-Objective Uniform-diversity Genetic Algorithm (MUGA) (M. Felezi, J. Rezapour, N. Nariman-zadeh, A. Jamali, M. Fakhraei), ), INISTA 2010,21-24 June, 2010, Kayseri, Turkey

PUBLICATIONS: Journal

1997

papers

“Evolutionary Design of Fuzzy-Logic Controllers for Manufacturing Systems”,(with Prof. B. Porter), Vol. 46/1, CIRP Annals.ISI

2000

“Genetic and Evolutionary Design and Robustification of Fuzzy-logic Controllers for manufacturing Systems” (with Dr. A. Darvizeh), IUST, Iranian Journal of Mechanical Engineering, pp. 1-12, No. 5, Summer 2000.

2001

“Optimal Design and Robustification of Fuzzy-Logic Controllers for Robotic Manipulators Using Genetic Algorithms”, Accepted in Amirkabir Journal of Science & Technology.

2002

“Design of Fuzzy Systems for the Modelling Explosive Cutting Process of Plates using Singular Value Decomposition”, (with Dr. A. Darvizeh), Iranian Journal of Science & Technology, Vol 26 B3, Shiraz University, 2002.ISI

2002

Polynomial Modelling of Explosive Compaction Process of Metallic

Powders Using GMDH-Type Neural Networks and Singular Value Decomposition, (with A. Darvizeh, H. Gharababei), Journal of Modelling and Simulation in Materials Engineering, Vol. 10, pp. 727-744, IOP Press, Nov. 2002.ISI

2002

Modelling of explosive cutting process of plates using GMDH-type neural network and singular value decomposition, (with A. Darvizeh, H. Gharababei), Journal of Materials Processing Technology, Vol. 128/1-3, pp. 80-87, Elsevier Science, Oct. 2002. ISI

2003

“Genetic and SVD Design of Fuzzy Systems for the Modelling and Prediction of Process Parameters of Explosive Cutting Process (with A. Darvizeh and F. Oliaei), Moddarres Technical and Engineering, Research Journal, No.12, pp 77-88, Moddarres University, 2003.

2003

“GMDH-Type Neural Network Modelling of Explosive Cutting Process of Plates Using Singular Value Decomposition”, (with Dr. A. Darvizeh and Mr. H. Gharababei), Systems Analysis Modelling Simulation, Volume 43 , Issue 10 , pp 1383 – 1397, 2003

2003

“Hybrid Genetic Learning of Radial Basis Function Networks (RBFNs) for the Modelling of Explosive Cutting Process of Plates”, (with A. Ddarvizeh), Scientia Iranica, International Journal of Sharif University of Technology, Iran, Vol. 10, No.1, Winter 2003.

2003

Hybrid Genetic Design of GMDH-Type Neural Networks Using Singular Value Decomposition for Modelling and Prediction of the Explosive Cutting Process, (with A. Darvizeh, G. R. Ahmad-Zadeh), Journal of Engineering Manufacture, IMechE Part B, Vol. 217, No. 6, 779-790, May 2003.ISI

2003

Optimal Design of ANFIS Networks using Genetic Algorithm and SVD for the Modelling of Natural Frequencies of Orthotropic Cylindrical Shells (with M. Darvizeh and M. Barati), WSEAS Transactions on Systems, Issue 4, Vol. 2, pp 827-832, Oct. 2003.

2003

Modelling and prediction of process parameters in explosive welding of plates using GMDH-type neural network and singular value decompostion, (with A. Darvizeh and H. gharababei), Iranian Journal of Science and Technology, Vol. 27, No. B3, pp. 551-562, 2003.

2004

Design of ANFIS Networks Using Hybrid Genetic And SVD Methods For Modelling of Explosive Cutting Process (with A. Darvizeh, M.H. Dadfarmai), Journal of Materials Processing Technology, Volumes 155-156, Pages 14151421, 2004.ISI

2004

Multi-objective Genetic Algorithms for Thermodynamic Optimization of Turbojet Engines (with K. Atashkari, X Yao, and A. Pilechi), IASME Transactions, Isuue 1, Vol. 1, pp 91-96, Jan. 2004.

2004

Genetic Design of GMDH-type Neural Networks for Modelling of Thermodynamically Pareto Optimized Turbojet Engines (with K. Atashkari, A. Darvizeh, X. Yao, A Jamali, and A Pilechi), WSEAS Transactions on Computers, Issue 3, Vol. 3, pp 719-724, 2004.

2004

A Polynomial Model for the Level Variations of the Caspian Sea using Evolutionary Design of Generalized GMDH-type Neural Networks (with A. Felezi, A. Darvizeh, A. Jamali, and A. Teymoorzadeh), WSEAS Transactions on Circiuts and Systems, Issue 2, Vol. 3, pp 318-323.

2004

Adaptive neurofuzzy inference systems networks design using hybrid genetic and singular value decomposition methods for modelling and prediction of explosive cutting process (with A. Darvizeh and M.H. Dadfarmai), Artificial Intelligence for Engineering Design Analysis and Manufacturing, Cambridge University Press, 2003, Vol. 17, No. 4/5, pp. 313-324. ISI

2005

Inverse Modelling of Multi-objective Thermodynamically Optimized Turbojet Engines using GMDH-type Neural Networks and Evolutionary Algorithms, (with , K. Atashkari, A. Jamali, A. Pilechi, X. Yao), Journal of

Engineering Optimization, 2005, Vol 37, No. 5, pp 437-462, Taylor & Francis.ISI

2005

Evolutionary Design of Generalized Polynomial Neural Networks for Modelling and Prediction of Explosive Forming Process (with A. Darvizeh, A. Jamali, A. Moeini), Journal of Material Processing and Technology, 2005, Vol 164-165, pp 1561-1571, Elsevier.ISI

2005

ANFIS Networks Design using Hybrid Genetic and SVD Methods for Modelling of the Level Variations of the Caspian Sea, (with A. Mehrdad, , A. Jamali, A. Teymoorzadeh), Wseas Transactions on Information Science & Applications, Issue 2, Volume 2, February 2005.

2005

Thermodynamic Pareto Optimization of Turbojet Engines using Multiobjective Genetic Algorithms, (with K. Atashkari, A. Plilechi, A. Jamali, and X. Yao), International Journal of Thermal Sciences, 2005, Vol 44, No. 11, pp 1061-1071, Elsevier.ISI

2005

GMDH Type Neural Networks and Their Application to the Identification of the Inverse Kinematics Equations of Robotic Manipulators (research note) (with A. Bagheri, A S Siavash, A R, Khoobkar), International Journal of Engineering, 2005, vol. 18, no. 2, pp. 135-143.

2006

Pareto Optimization of Energy Absorption of Square Aluminium Columns Using Multi-objective Genetic Algorithms, (with A. Darvizeh and a. Jamali), Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B, Vol 220, No.2, pp 213-224, 2006.ISI

2006

Multi-objective Optimization of Abrasive Flow Machining Processes using Polynomial Neural Networks and Genetic Algorithms, (with A Tavoli, A Khalkhali, M Mehran), Int. Journal of Machining Science and Technology, Volume 10, Number 4, pp 491-510, 2006.ISI

2007

Modelling and multi-objective optimization of a variable valve-timing sparkignition engine using polynomial neural networks and evolutionary algorithms, (with K Atashkari, M. Gölcü, A. Khalkhali and A. Jamali), Energy Conversion and Management, Volume 48, Issue 3, Pages 1029-1041, 2007. ISI

2007

Polynomial Modeling of the Controlled Rack-Stacker Robot Using GMDHtype Neural Networks and Singular Value Decomposition (with A. Bagheri, M. Babaei, and .Jamali), International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 8, No.3, 2007.ISI

2007

Frequency-based Reliability Pareto Optimum Design of PID Controllers for Systems with Probabilistic Uncertainty, (with A. Jamali and A.Hajiloo),

Proceedings of the Institution of Mechanical Engineers, Part I, Journal of Systems and Control Engineering (IMechE, part I), Volume 221, Number 8, 2007 .ISI

2007

Prediction of Concrete Compressive Strength using Evolved Polynomial Neural Networks, (with N. Hamid-zadeh, A Jamali, H. Akbarzadeh), WSEAS Transactions on Systems, Issue 4, Vol. 6, 802-808

2007

Pareto Optimum Design of Robust PI Controllers for Systems with Parametric Uncertainty, (with A Hajiloo, A Jamali), International Review of Mechanical Engineering, Vol 1, No.6, Nov. 2007.

2008

Modelling and Pareto Optimization of Heat Transfer and Flow Coefficients in Microchannels using GMDH type Neural Networks and Genetic Algorithms, (with N. Amanfard, M. Borji, A. Khalkhali and A. Habibdoust), Energy Conversion & Management, 2008, Vol. 49, no. 2, pp. 311-325.ISI

2008

Turbulence Intensity Modelling of In-Cylinder Swirl Flow Using GA/SVD Designed Polynomial Neural Network, (with K. Atashkari, N. Narimanzadeh, A. Jamali), International Review of Mechanical Engineering (IREME), Vol. 2, No. 3, May 2008.

2009

Pareto Optimal Synthesis of Four-bar Mechanisms for Path Generation, (with M E Felezi, A Jamali, A Ganji), Mechanism and Machine Theory, Volume 44, Issue 1, January 2009, Pages 180-191.ISI

2009

Multi-objective Evolutionary Optimization of Polynomial Neural Networks for Modelling and Prediction of Explosive Cutting Process, (with A Jamali, A Darvizeh, A Masouli, S.Hamrang), Engineering Applications of Artificial Intelligence, Volume 22, Issues 4-5, June 2009, Pages 676-687. ISI

2009

Modelling and Multi-objective Optimization of Stall on NACA 0015 Airfoil with A Synthetic Jet using GMDH Type Neural Network and Genetic Algorithms, (with R., Razaghi and N., Amanifard), IJE Trans A: Basics, Vol22, No.1, 69-88.

2009

Multi-Objective Pareto Robust Design of PID Controllers for Variable Compression Ratio Engines Using Genetic Algorithms, (with S. M. Besarati, K. Atashkari, A. Hajiloo, H. Nikpey), International Review of Automatic Control (IREACO), Vol. 2, No. 2, March 2009.

2009

Piles shaft capacity from CPT and CPTu data by polynomial neural networks and genetic algorithms, (with H. Ardalan and A Eslami), Computers and Geotechnics, Volume 36, Issue 4, May 2009, Pages 616-625.ISI

2009

An investigation on the Su–NSPT correlation using GMDH type neural networks and genetic algorithms, (with F. Kalantary and H. Ardalan), Engineering Geology, Volume 104, Issues 1-2, 24 February 2009, Pages 144155.ISI

2009

Design of Hybrid Genetic- SVD ANFIS Networks for Fatigue Life Modelling of GRP Composites, (with K. Salmalian, H. Haftchenari, A. Jamali), Fuzzy Inf. Eng., Springer, 2009, 3:271-287

2010

Reliability-based robust Pareto design of linear state feedback controllers using a multi-objective uniform-diversity genetic algorithm (MUGA), (with A. Jamali, A. Hajiloo), Expert Systems with Applications, Volume 37, Issue 1, January 2010, Pages 401-413.ISI

2010

Thermodynamic performance optimization of a combined power/cooling cycle, (with K. Atashkari, M. Pouraghaie, S. Beserati and) , Energy Conversion and Management, Volume 51, Issue 1, January 2010, Pages 204-211.ISI

2010

Multi-objective thermodynamic optimization of combined Brayton and inverse Brayton cycles using genetic algorithms, (with K. Atashkari, S. M. Beserati, A. Jamali, A. Hajiloo), Energy Conversion and Management, Volume 51, Issue 1, January 2010, Pages 212-217.ISI

2010

Pareto Optimization of a 5-Degree of Freedom Vehicle Vibration Model Using a Multi-objective Uniform-diversity Genetic Algorithm (MUGA), (with M Salehpour, A Jamali, E. Haghgoo), Engineering Applications of Artificial Intelligence, Volume 23, Issue 4, June 2010, Pages 543-551.ISI

2010

A Simple Modelling Method for Deflection of Circular Plates under Impulsive Loading using Dimensionless Analysis and Singular Value Decomposition, (with H. Gharababaei, A. Darvizeh), Journal of Mechanics, Vol. 26, No. 3, September 2010, Pages 355-361.ISI

2010

Reliability-based Robust Multi-objective Crashworthiness Optimization of Sshaped Box Beams with Parametric Uncertainties, (with A Khalkhali, A Darvizeh, A Msoumi, B Notghi), Journal of Crashworthiness, (Taylor and Francis), , Vol. 15, No. 4, August 2010, 443–456.ISI

2010

Multi-objective evolutionary optimization of polynomial neural networks for fatigue life modelling and prediction of unidirectional carbon-fibre-reinforced plastics composites, (with K Salmalian, N Nariman-Zadeh,H Gharababei1,H Haftchenari, and AVarvani-Farahani), Proc. IMechE Vol. 224 , No. 2, 79-91, Part L: J. Materials: Design and Applications, 2010.ISI

2010

Evolutionary design of generalized GMDH-type neural network for prediction of concrete compressive strength using UPV, (with Madandoust,

R., Ghavidel R.), Computational Materials Science, Volume 49, Issue 3, September 2010, Pages 556-567.ISI

2010

Robust Design of S-Shaped Box Beams Subjected to Compressive Load, (with A. Khalkhali, A. Darvizeh, A. Masoomi, A.Shiri), Mathematical Problems in Engineering, Vol 2010, pp 1-18.ISI

2011

Estimating Water Retention with Pedotransfer Functions Using MultiObjective Group Method of Data Handling and ANNs, (with H Bayat,MR Neishabouri, K Mohammdi), Pedosphere, Volume 21, Issue 1, February 2011, Pages 107-114. ISI

2011

Modeling and multi-objective optimization of square cyclones using CFD and neural networks, (H. Safikhani, M.A. Akhavan-Behabadi, N. Narimanzadeh, M.J. Mahmood Abadi), Chemical Engineering Research and Design, 89 ( 2011) 301–309.ISI

2011

Optimal Selection of Active Suspension Parameters Using Artificial Intelligence, (M. Salehpour, A. Jamali, and N. Nariman-zadeh), International Journal of Automotive Engineering, Vol. 1, Number 4, 244-255

2012

Optimum Pareto design of non-linear predictive control with multi-design variables

for

PEM

fuel

cell,

(A.

Shokuhi-Rad,

A.

Jamali*,

M.

Naghashzadegan, N. Nariman-zadeh, A. Hajiloo), International journal of hydrogen energy 37 (2012) 11244-11254.ISI

2012

A new optimization algorithm based on a combination of particle swarm optimization, convergence and divergence operators for single-objective and multi-objective problems (M.J. Mahmoodabadi*, A. Bagheri, N. Narimanzadeha, and A. Jamali), Engineering Optimization, Volume 44, Issue 10, 1167-1186.ISI

2012

Pareto Design of Decoupled Sliding-Mode Controllers for Nonlinear Systems Based on a Multiobjective Genetic Algorithm, (M. J. Mahmoodabadi, A. Bagheri, N. Nariman-Zadeh, A. Jamali, and R. Abedzadeh Maafi), Journal of Applied Mathematics, Volume 2012, Article ID 639014, 22 pages doi:10.1155/2012/639014.ISI

2012

Pareto optimal robust design of fractional-order PID controllers for systems with probabilistic uncertainties (A. Hajiloo, N. Nariman-zadeh, Ali Moeini ), Mechatronics 22 (2012) 788–801.ISI

2012

Limit cycle walker push recovery based on a receding horizon control scheme, (Behnam Miripour Fard, Ahmad Bagheri and Nader Nariman-Zadeh), Proc IMechE Part I:J Systems and Control Engineering 226(7) 914–926.ISI

2013

The multi-objective optimization design of a fuzzy controller for ball and beam system using Genetic Algorithm, (S.S. Nejati N.Nariman-zadeh, A.Jamali), The International Journal of Computer Science &Applications, Volume 2, No. 01

2013

Probability of failure for uncertain control systems using neural network and multi-objective uniform-diversity genetic algorithms (MUGA) (A. Jamali, M. Ghamati, B. Ahmadi, N. Nariman-zadeh), Engineering Applications of Artificial Intelligence 26 (2013) 714–723.ISI

2013

Combination of artificial neural networks and fractal theory to predict soil water retention curve, (Hossein Bayat, Mohammad Reza Neyshaburi, Kourosh Mohammadi, Nader Nariman-Zadeh, Mahdi Irannejad, Andrew S. Gregory), Computers and Electronics in Agriculture 92 (2013) 92–103.ISI

2013

Improving water content estimations using penetration resistance and principal component analysis, (Hossein Bayat*, Mohammad Reza Neyshaburi, Kourosh Mohammadi, Nader Nariman-Zadeh, Mahdi Irannejad), Soil & Tillage Research 129 (2013) 83–92.ISI

2013

Robust Pareto active suspension design for vehicle vibration model with probabilistic uncertain parameters, (A. Jamali, M. Salehpour, N. Narimanzadeh), Multibody Syst Dyn (2013) 30:265–285.ISI

2013

Pareto optimal design of decoupled sliding mode control for an inverted pendulum system and its stability simulation via Java’s programming, (M.J.Mahmoodabadi, S.Arabani Mostaghim, A.Bagheri, N.Nariman-zadeh), Mathematical and Computer Modelling, 57(2013)1070–1082. ISI

2013

A Novel Combination of Particle Swarm Optimization and Genetic Algorithm for Pareto Optimal Design of a Five-degree of Freedom Vehicle Vibration Model, (M.J. Mahmoodabadi, A. Adljooy Safaie, A.Bagheri, N. Narimanzadeh), Applied Soft Computing 13, 2577–2591

2013

Extracting fuzzy rules for modeling of complex processes using neural networks, (A Jamali, SJ Motevalli and N Nariman-zadeh), Proc IMechE Part C: J Mechanical Engineering Science 227 (123), 2861–2869, IMechE, ISI.

2013

Reliability-based optimal controller design for systems with probabilistic uncertain parameters using fuzzy limit state function, (A Jamal, B Ahmadi,M Ghamati, and N Nariman-zadeh), Journal of Vibration and Control August 2, 2013 1077546313496298, ISI.

2014

Optimal design of mixed Kalman-H_∞ filter using multi objective optimization method, (M Masoomnejad, A Moafi, A Jamali, N Nariman-zadeh), Journal of Modares Mechanical Eng., Vol 14, No. 2, pp 128-132, in Persian

2014

Optimal state estimation of a dynamical system corrupted with colored noises using Mixed Kalman/H-infinity filter, (M Masoumnezhad, M Nahaleh-kah, A Jamali, N Nariman-zadeh), Journal of Modares Mechanical Eng., Vol 14, No.12, pp67-74, in Persian.

2014

Parameter estimation of the GMDH-type neural network using UKF filter, (M Masoumnezhad, A Jamali, N Nariman-zadeh) Journal of Modares Mechanical Eng., Vol 14, No.15, pp 59-66, in Persian.

2014

Optimal design of symmetrical/ asymmetrical sigma-point Kalman filter using genetic algorithms, (M Masoumnezhad, A Jamali, N Nariman-zadeh), Transactions of the Institute of Measurement and Control, Aug. 2014. ISI

2014

Multi-objective optimal design of online PID controllers using model predictive control based on the group method of data handling-type neural networks, (V. Majdabadi-Farahani, M. Hanif, I. Gholaminezhad, A. Jamali, N. NarimanZadeh), International Journal of Systems Science, Volume 47, Number 7, 18 May 2016, pp. 1675-1688(14) Taylor and Francis, ISI.

2014

Multi-objective genetic programming approach for robust modeling of complex manufacturing processes having probabilistic uncertainty in experimental data A. Jamali, E. Khaleghi, I. Gholaminezhad,N. Nariman-Zadeh, B. Gholaminia, A. Jamali, Omidi), J Intell Manuf DOI 10.1007/s10845-014-0967-7, Springer,ISI.

2014

A hybrid method of FEM, modified NSGAII and TOPSIS for structural optimization of sandwich panels with corrugated core, Abolfazl Khalkhali · Sharif Khakshournia · Nader Nariman-Zadeh, Jun 2014 · Journal of Sandwich Structures and Materials, July 2014 vol. 16 no. 4 398-417, ISI.

2015

Modeling, parametric analysis and optimization of an anode-supported planar solid oxide fuel cell Mehdi Borji · Kazem Atashkari · Nader Nariman-zadeh · Mehdi Masoumpour, Jan 2015 Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996 (vols 203-210), ISI.

2015

Improvement in estimation of soil water retention using fractal parameters and multiobjective group method of data handling, Neyshaburi; Bayat; Mohammadi; Nariman-Zadeh; Irannejad, Archives of Agronomy and Soil Science 61(2), pp 257273 (17), February 2015, ISI.

2015

Model-based evaluation of an integrated autothermal biomass gasification and solid oxide fuel cell combined heat and power system, Mehdi Borji, Kazem Atashkari, Saba Ghorbani, Nader Nariman-Zadeh, Dec 2015, ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996 (vols 203-210), ISI.

2016

Robust GMDH-type neural network with unscented Kalman filter for non-linear systems, M. Masoumnezhad, A. Jamali, N. Nariman-zadeh, Transactions of the Institute of Measurement and Control August 2016 vol. 38 no. 8 992-1003, ISI.

2016

Pareto optimal design of reconfigurable rice seedling transplanting mechanisms using multi-objective genetic algorithm, lezi, M. E.; Vahabi, S.; Nariman-zadeh, N., Neural Computing and Applications, Volume 27, Number 7, 2016, pp. 1907-1916(10), ISI.

2016

Modelling and prediction of complex non-linear processes by using Pareto multiobjective genetic programmin, (A. Jamali, E. Khaleghi, I. Gholaminezhad and N. Nariman-zadeh), International Journal of Systems Science, : Jamali, A.; Khaleghi, E.; Gholaminezhad, I.; Nariman-zadeh, N., International Journal of Systems Science, Volume 47, Number 7, 18 May 2016, pp. 1675-1688(14), ISI.

2016

Parametric analysis and Pareto optimization of an integrated autothermal biomass gasification, solid oxide fuel cell and micro gas turbine CHP system, Mehdi Borji, Kazem Atashkari, Saba Ghorbani, Nader Nariman-Zadeh, International Journal of Hydrogen Energy, Volume 40, Issue 41, 2 November 2015, Pages 14202-14223, ISI.

2016

Multi-objective optimum design of ANFIS for modelling and prediction of deformation of thin plates subjected to hydrodynamic impact loading, A Jamali, H Babaei, N Nariman-Zadeh, SH Ashraf Talesh, T Mirzababaie Mostofi, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications July 22, 2016 1464420716660332, ISI.

2016

Path synthesis of four-bar mechanisms using synergy of polynomial neural network and Stackelberg game theory, Bahman Ahmadi, Nader Nariman-zadeh , Ali Jamali , Engineering Optimization, dx.doi.org/10.1080/0305215X.2016.1218641, ISI.

2016

Strategic design of mechanical systems in the non-cooperative environment using the game theory, Bahman Ahmadi, Nader Nariman-zadeh , Ali Jamali, ) Journal of Modares Mechanical Eng., Vol 16, No.7, pp 317-326, in Persian.

2017

Tool frictional stir effect on dimensional accuracy and formability in single point incremental forming at high rotational speeds, A.Taherkhani, A. Basti, N. Narimanzaeh, A. Jamali, Journal of Modares Mechanical Eng., Vol 16, No.12, pp 665-674, in Persian.

2017

A new adaptive differential evolution optimization algorithm based on fuzzy inference system, M. Salehpoor, A. Jamali, A. Bagheri, N. Nariman-zadeh, Engineering Science and Technology, an International Journal, Elsevier. Vol 20, No.2, pp 587-597.

2017

Model-based evaluation of an integrated autothermal biomass gasification and solid oxide fuel cell combined heat and power system, M. Borji, K. Atashkari, S. Ghorbani, N. Nariman-zadeh, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, Vol 231, No. 17

2017

Thermodynamic analysis and Pareto optimization of hybrid system consisting of biomass gasification, solid oxide fuel cell and, gas turbine, M. Borji, K. Atashkari, S. Ghorbani, N. Nariman-zadeh, Journal of Solids and Fluid Mechanics, Vol 17, No. 1,pp 113-133

2017

Sizing and topology optimization of spatial truss structures using hybrid algorithm of genetic programing and Nelder-Mead, H. Asimi, A. Jamali, N. Nariman-zadeh, Journal of Modares Mechanical Eng., Vol 17, No. 6, pp 32-40

2017

Sizing and topology optimization of truss structures using genetic programming, H. Asimi, A. Jamali, N. Nariman-zadeh,

Swarm and Evolutionary Computation,

Volume 37, Pages 90-103 2017

Optimum sliding mode controller design based on skyhook model for nonlinear vehicle vibration, M. Salehpoor, A. Jamali, A. Bagheri, N. Nariman-zadeh, International Journal of Automotive Engineering, Vol. 7 No. 4, pp 2537-2550

2018

Multi-objective sizing and topology optimization of truss structures using genetic programming based on a new adaptive mutant operator, H. Asimi, A. Jamali, N. Nariman-zadeh,

Neural

Computing

and

Applications,

https://doi.org/10.1007/s00521-018-3401-9

2018

Achieving maximum dimensional accuracy and surface quality at the shortest possible time in single-point incremental forming via multi-objective optimization, A.Taherkhani, A. Basti, N. Nariman-zaeh, A. Jamali, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, https://doi.org/10.1177/0954405418755822

Book Chapters

1-

Multi-objective Uniform-diversity Genetic Algorithm (MUGA), (with A. Jamali, K Atashkari), in “Advances in Evolutionary Algorithms”, Edited by Witold Kosinski, ISBN 978-953-7619-11-4, Publisher: INTECH, Austria

2-

Pareto Optimum Design of Robust Controllers for Systems with Parametric Uncertainties, (with A Hajiloo, A Moeini), in “Robotics Automation and Control”, Edited by Pavla Pecherkova, Miroslav Flidr and Jindrich Dunik, ISBN 978-953-7619-18-3, Publisher: INTECH, Austria

3-

Hybrid Genetic Algorithm and GMDH System, (with A. Jamali), in “Hybrid Self-Organizing Modeling Systems, Onwubolu, Godfrey C. (Ed.), ISBN: 978-3-642-01529-8, 2009, Springer

Smile Life

When life gives you a hundred reasons to cry, show life that you have a thousand reasons to smile

Get in touch

© Copyright 2015 - 2024 PDFFOX.COM - All rights reserved.