department of mechanical engineering engineering faculty sebelas [PDF]

the legislation (Permendiknas No 17, tahun 2010). 2. Publication of some or all of the contents of the Thesis or ..... F

0 downloads 3 Views 467KB Size

Recommend Stories


faculty of mechanical engineering
Come let us be friends for once. Let us make life easy on us. Let us be loved ones and lovers. The earth

Çankaya University Faculty of Engineering Mechanical Engineering Department ME 211
You miss 100% of the shots you don’t take. Wayne Gretzky

department of mechanical engineering
Don't ruin a good today by thinking about a bad yesterday. Let it go. Anonymous

Department of Mechanical Engineering
Don’t grieve. Anything you lose comes round in another form. Rumi

Mechanical Engineering Department
Goodbyes are only for those who love with their eyes. Because for those who love with heart and soul

Department of Aerospace and Mechanical Engineering AME Mechanical Engineering Courses
Be grateful for whoever comes, because each has been sent as a guide from beyond. Rumi

Department of Mechanical Engineering B.Tech. Mechanical Engineering with specialization in
We may have all come on different ships, but we're in the same boat now. M.L.King

Faculty of Engineering Department of Civil Engineering COURSE OUTLINE
If you are irritated by every rub, how will your mirror be polished? Rumi

Mechanical Engineering Department News Letter
Just as there is no loss of basic energy in the universe, so no thought or action is without its effects,

Idea Transcript


perpustakaan.uns.ac.id

digilib.uns.ac.id

NUMERICAL STUDY OF ALUMINUM BLADE OF AN AXIAL FAN WITH VARIOUS TWIST ANGLE AND CHORD LENGTH USING ABAQUS SOFTWARE Thesis Organized to meet a part of the requirements to achieve the master degree of Mechanical Engineering

By EBRAHIM MUSTAFA ABDALLA S951302504

DEPARTMENT OF MECHANICAL ENGINEERING ENGINEERING FACULTY SEBELAS MARET UNIVERSITY SURAKARTA 2015 commit to user

perpustakaan.uns.ac.id

digilib.uns.ac.id

commit to user ii

perpustakaan.uns.ac.id

digilib.uns.ac.id

commit to user iii

perpustakaan.uns.ac.id

digilib.uns.ac.id

ORIGINALITY AND PUBLICATION STATEMENT

We declared that: 1.

Thesis entitled: NUMERICAL STUDY OF ALUMINUM BLADE OF AN AXIAL FAN WITH VARIOUS TWIST ANGLE AND CHORD LENGTH USING ABAQUS SOFTWARE

there

is no scientific papers that have been asked by others to obtain academic degrees and there is no work or opinion ever written or published by another person except in writing used as a reference in this text and a reference source as well as mentioned in the bibliography. If at a later proved there is plagiarism in scientific papers, then I am willing to accept sanctions in accordance with the provisions of the legislation (Permendiknas No 17, tahun 2010) 2.

Publication of some or all of the contents of the Thesis or other scientific forums and permission must include the author and the team as a supervisor. If within at least one semester (six months after examination of the thesis) I did not make the publication of part or entire of this thesis, the Program in Mechanical Engineering of UNS has the right to publish in a scientific journal published by Study Program in Mechanical Engineering of UNS. If I violate of the provisions of this publication, then I am willing to get an academic sanction.

Surakarta, June 2015 Student,

EBRAHIM MUSTAFA ABDALLA S951302504

commit to user

perpustakaan.uns.ac.id

digilib.uns.ac.id

MOTTO

will never know the real answer, before you (anonim)

you want the respect of others, you must respect yourself (anonim)

"Be a good man, because Allah loves the goodness" (The writer)

commit to user v

perpustakaan.uns.ac.id

digilib.uns.ac.id

DEDICATION

This paper is dedicated to: 1. Mustafa and Hansa, my parents who have been educated with simplicity, compassion with tolerance and patience above all prayer and boundless sacrifices that he always gave to the author. 2. Rabiah and Hasna and Fatima and Yusuf my wife and my children dear, who always gives warmth and motivation that makes its own spirit to the author. 3. Brother and sister who always gives a special motivation so I have always been motivated to move forward.

commit to user vi

perpustakaan.uns.ac.id

digilib.uns.ac.id

ACKNOWLEDGEMENT All praise and gratitude writer prayed Almighty God's gift. Because thanks to NUMERICAL STUDY OF ALUMINUM BLADE OF AN AXIAL FAN WITH VARIOUS TWIST ANGLE AND CHORD LENGTH USING ABAQUS SOFTWARE . The authors wish to thank you especially to the supervisor that the Honorable. Dr. Danardono DPT and Dr.Triyono ST. Which has deigned to provide motivation, direction, guidance, knowledge, inputs and corrections to this thesis can be resolved. As well as to the entire to fathers Mechanical Engineering

lecturer Engineering Faculty Program

Sebelas Maret University of Surakarta who has given science and knowledge to the author for his education at the Graduate Program, Sebelas Maret University of Surakarta. On this occasion, the authors also express gratitude to: 1. Prof. Dr. Ravik Karsidi, M.S., as Rector of the University of Sebelas Maret, which has given permission to the author and the opportunity to participate in and complete the Graduate Program at the Sebelas Maret University of Surakarta. 2. Prof. Dr. M. Furqon Hidayatullah, M.Pd., as Director of the Graduate Program, Sebelas Maret University of Surakarta who has given the author the opportunity to gain knowledge of education in the Graduate Program. 3. Dr. Danardono , as the first supervisor who has given direction and guidance in the preparation of the thesis. 4. Dr. Triyono, ST.,MT. as the Second supervisor who has given direction and guidance in the preparation of the thesis 5. Dr. Triyono, ST.,MT. as Head of Mechanical Engineering Graduate Program, University of Maret , who has given direction and guidance in the preparation of the thesis 6. All those who helped in completing this thesis and the author cannot describe one by one. Care and support they have given to the author will be given just reward by Allah Almighty and be charitable and glory for all of us. Ebrahim Mustafa Abdalla S951302504

commit to user vii

perpustakaan.uns.ac.id

Ebrahim

Mustafa

digilib.uns.ac.id

Abdalla,

S951302504

(NUMERICAL

STUDY

OF

ALUMINUM BLADE OF AN AXIAL FAN WITH VARIOUS TWIST ANGLES AND CHORD LENGTHS USING ABAQUS SOFTWARE). Thesis: The Graduate Program in Mechanical EngineeringProgram, Sebelas Maret University, Surakarta, 2015. Supervisor I: D.Danardono D.P.T., S.T., M.T., Ph.D. Supervisor II: Dr. Triyono, ST., MT.

ABSTRACT The purpose of this work is to optimize the blade design of an axial-flow fan. Four different chord length and five twisting angle of their blades were studied. The fan was designed by using NACA 5505 series. The first investigation is conducted to the blade design in the variation of chord length. The base chord length is constant of 130 mm and the tip is vary from 84, 92, 102 and 110 mm. The second study is in the variation of twisting angle from 0, 10, 20, 30 and 40o. The performances of the fans were measured in a Von Mises stress criterion under pressure of 500 Pa. From the variation of chord length, the shortest length of 84 mm was delivered the lowest stress. While the variation of twisting angle, the lowest stress is delivered by 40o of twisting angle. The proposed blade design is presented by using combination of twisting angle 10, 20, 30 and 40o in single blade model. The blade total length of 446.5 mm is divided into four parts and every part have different twisting angle. From the stress result, the proposed model was delivered lower stress compared to the other models.

Keywords: Axial fan, twist angle, chord length, stress analysis, finite element method.

commit to user viii

perpustakaan.uns.ac.id

digilib.uns.ac.id

CONTENT LIST

TITLE PAGE ........................................................................................................

i

APPROVAL PAGE ..............................................................................................

ii

SUPERVISOR ENDORSEMENT .......................................................................

iii

STATEMENT OF ORIGINALITY AND PUBLICATION OF CONTENTS THESIS .................................................................................................................

iv

MOTTO ................................................................................................................

v

DEDICATION ......................................................................................................

vi

INTRODUCTION ................................................................................................

vii

ABSTRACT ..........................................................................................................

viii

CONTENT LIST ...................................................................................................

ix

FIGURE LIST .......................................................................................................

xi

TABLE LIST ........................................................................................................

xiii

CHAPTER I

CHAPTER II

INTRODUCTION ....................................................................

1

1.1 Background ........................................................................

1

1.2 Problem statement ..............................................................

2

1.3 Thesis objective and benefit ...............................................

2

1.4 Thesis Limitation ................................................................

2

LITERATURE REVIEW ........................................................

3

2.1 Study Literature .................................................................

3

2.1.1

Axial Flow Fan Construction and Efficiency ......

3

2.1.2

NACA series airfoils ..........................................

4

2.1.3

Finite Element Analysis Method .........................

5

2.1.4

Chord length, and twist angle optimization .........

6

2.1.5

Axial Flow Fans ..................................................

8

2.1.6

Airfoil ..................................................................

10

2.1.7

Air velocity type ..................................................

11

2.1.8

Blade angle and twist...........................................

11

2.1.9

Analysis Method and Software ...........................

12

2.2 Basic Theory ......................................................................

13

2.2.1

Abaqus and Modeling..........................................

commit to user ix

13

perpustakaan.uns.ac.id

CHAPTER III

digilib.uns.ac.id

2.2.2

Von Miss Stress ...................................................

14

2.2.3

Equation ...............................................................

14

METHODOLGY .....................................................................

16

3.1 Fan properties ....................................................................

16

3.2 Blade properties and Material ............................................

16

3.3 Airfoil Generator Design ...................................................

17

3.4 ABAQUS stress Analysis ..................................................

17

3.5 Section of Airfoil with AutoCAD .....................................

18

3.6 CATIA to Design a Blade with Different Twist Angle and thickness .....................................................................

19

3.7 Blade Analysis with ABAQUS .........................................

20

3.8 Mesh Convergence Study ..................................................

21

3.9 Twist Angle .......................................................................

22

3.10 The Proposed Model .........................................................

23

3.11 Flow Chart of the Research Methodology ........................

24

RESULTS AND DISCUSSION ...............................................

25

4.1 Validation of Analysis ........................................................

25

4.2 Influence of Chord Length ..................................................

26

4.3 Influence of Twisting Angle ...............................................

28

4.4 Results of Proposed Model .................................................

32

CONCLUSION AND SUGGESTION .....................................

36

5.1 Conclusion ..........................................................................

36

5.2 Suggestion...........................................................................

36

REFERENCE .......................................................................................................

37

APPENDIX ...........................................................................................................

40

CHAPTER IV

CHAPTER V

commit to user x

perpustakaan.uns.ac.id

digilib.uns.ac.id

FIGURE LIST Figure 2.1

NACA5505 Airfoil ..........................................................................

5

Figure 2.2

Fan performance curve ....................................................................

9

Figure 2.3

Airfoil shape of cross section...........................................................

10

Figure 2.4 Two views of a fabricated tube axial fan wheel, with larger blade angles at hub and smaller blade angles at the tip .............................

12

Figure 3.1

Axial Aluminum .............................................................................

16

Figure 3.2

NACA 5505 Airfoil in AutoCAD ....................................................

18

Figure 3.3

Designed blade without twist angle .................................................

19

Figure 3.4

Designed blade with 20° of twist angle ...........................................

19

Figure 3.5

The first module in ABAQUS: module part ....................................

20

Figure 3.6

Assign section material to the blade ................................................

20

Figure 3.7

Loading and boundary condition .....................................................

21

Figure 3.8

Meshed blade ...................................................................................

21

Figure 3.9

Mesh dimensional rectangular flat elements ...................................

22

Figure 3.10 Airfoil shape of cross section with different twist angles ................

22

Figure 3.11 Twist angle in root and tip ...............................................................

22

Figure 3.12 The proposed model use different twisting angle in four span ........

23

Figure 3.13 Flow Chart of the Research Methodology .......................................

24

Figure 4.1

Stress distribution of NACA 5514 under load pressure 0.5 MPa. ...

25

Figure 4.2

Results validation .............................................................................

26

Figure 4.3

Influenced of tip chord length in the stress generation ...................

27

Figure 4.4

Stress distribution of NACA 5505, tip chord length 110 mm .........

27

Figure 4.5

Stress distribution of NACA 5505, tip chord length 84 mm ...........

28

Figure 4.6

Influenced of twisting angle in stress generation for tip chord length 84 mm ...................................................................................

Figure 4.7

Influenced of twisting angle in stress generation for tip chord length 92 mm ...................................................................................

Figure 4.8

30

Influenced of twisting angle in stress generation for tip chord length 102 mm ................................................................................

Figure 4.9

29

30

Influenced of twisting angle in stress generation for tip chord length 110 mm .................................................................................

commit to user xi

31

perpustakaan.uns.ac.id

digilib.uns.ac.id

Figure 4.10 Influenced of twisting angle in stress generation for all tip chord length ...............................................................................................

31

Figure 4.11 Maximum stress of proposed model in variation of tip chord length ...............................................................................................

33

Figure 4.12 Stress distribution of proposed model of NACA 5505, tip of chord length 84 mm .........................................................................

33

Figure 4.13 Stress distribution of proposed model of NACA 5505, tip of chord length 110 mm .......................................................................

34

o

Figure 4.14 Maximum stress comparison between proposed model, 40

twisting angle and 0o twisting angle ................................................

commit to user xii

34

perpustakaan.uns.ac.id

digilib.uns.ac.id

TABLE LIST

Table 3.1

Aluminum 6061-T91 properties ......................................................

Table 3.2

Some exported points from NACA 5 Digits Series Profile Generator for NACA 5505 ..............................................................

commit to user xiii

17

18

Smile Life

When life gives you a hundred reasons to cry, show life that you have a thousand reasons to smile

Get in touch

© Copyright 2015 - 2024 PDFFOX.COM - All rights reserved.