I tried to make sense of the Four Books, until love arrived, and it all became a single syllable. Yunus
Idea Transcript
Determination of clad plates residual stresses by x - ray diffraction method Mateša, Branko and Kožuh, Zoran and Dunđer, Marko and Samardžić, Ivan (2015) Determination of clad plates residual stresses by x - ray diffraction method. = Determination of clad plates residual stresses by x - ray diffraction method. Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (6). pp. 1533-1538. ISSN 1330-3651. Vrsta rada: ["eprint_fieldopt_article_type_article" not defined]. . Točan broj autora: 4. Full text not available from this repository. Official URL: http://hrcak.srce.hr/index.php?show=clanak&id_...
Abstract The paper elaborates the influence that clad procedure has on the level and nature of residual stresses in clad plates. There are three clad procedures applied, as follows: hot rolling, submerged arc welding (SAW) with strip electrode in two layers and explosion welding. Theoretical basics on residual stresses measured by x-ray diffraction are reviewed in the paper, with special emphasis put on problems of underclad cracking tendency. In all applied cladding procedures, usage of heat treatment by anealing resulted in the decrease of residual stresses values. However, transformation of commpresed stresses into tensile stresses in some cases was very unfavourable, if referring to the tendency of plating corrosion resistant steel to stress corrosion and to underclad cracking. Item Type: Article (["eprint_fieldopt_article_type_article" not defined]) Keywords (Croatian): clad plates ; residual stresses ; x-ray diffraction method ; underclad cracking Subjects: TECHNICAL SCIENCE > Mechanical Engineering Divisions: 1100 Department of Welded Structures > 1110 Chair of Welded Structures Date Deposited: 21 Sep 2016 10:26 Last Modified: 21 Sep 2016 10:26 URI: http://repozitorij.fsb.hr/id/eprint/6676