API 600 CAST STEEL VALVES COMPANY INTRODUCTION Delta Pacific Valve Manufacturing Company Consistent product quality and availability of substantial stock makes DPV® a dependable choice for API 600 cast steel gate, globe and check valves where total reliability is of the utmost concern. DPV® manufactures valves to industry and international standard specifications, or to customer specified requirements, both promptly and economically. DPV® maintains an extensive quality system which complies with the requirements of major oil companies, industry standards and to the ISO 9000 Standard. DPV® cast steel valves are manufactured in compliance with the requirements of API 600 / ISO 14313 and pressure tested in accordance with API 598 standard. Materials of construction include the ASTM A216 and ASTM A352 range of carbon steels, the ASTM A217 range of alloy steels, and the ASTM A351 and ASTM A890 range of corrosion-resistant steels; the pressure containing components being of high integrity castings. All DPV® gate and globe valves can be easily adapted for actuation to most makes of actuators or to suit customer specifications.
Environmentally Friendly Valves In concert with customers' continual efforts to both reduce the cost of ownership and comply with local environmental requirements, DPV® now manufactures a range of low emission valves offering minimum leakage and maximum service life in the stem sealing and bonnet joint areas. Testing and evaluation criteria is based on EPA method 21, and emission rates lower than 500 ppm during operation are standard for this range of gate, globe and check valves.
DPV® is an internationally registered trademark of DPSI, New York, U.S.A.
DELTA PACIFIC VALVE MFG CO
2
GATE VALVES GATE VALVE DESIGN FEATURES u u u u u u u
One-Piece Flexible Wedge Gate Bolted Bonnet Construction Outside Screw and Yoke Non-Rotating Rising Stem, Non-Rising Handwheel Manual Operation Standard, Actuation Available Threaded or Welded in Place Seat Rings Complete with Conical Stem Backseat Typical Construction
u u u
u u
Design Shell Thickness Flanged Ends
Face-to-Face Testing No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 / 16 17 18 19 21
: API 600 / BS 1414 / ISO 10434 : API 600 / BS 1414 / ISO 10434 : ASME B16.5 (Sizes ≤ 24") MSS SP-44 (Sizes > 24") API 605 (Sizes > 24") : ASME B16.10 : API 598 / BS 6755 Part 1 Part Name
Body Bonnet Gate Seat Ring Stem Backseat Bushing Gland Gland Flange Stem Packing Bonnet Gasket Stem Nut Threaded Bushing Handwheel Handwheel Nut Bonnet Bolt / Nut Gland Eyebolt Gland Pin Gland Nut Lubrication Fitting
Note: Weld end valves available upon request u
u
u
u
u
Heavy duty BODY with full port diameter and shell thickness to API / BS standards (as applicable) SEAT RINGS and GATE ground and lapped to a mirror finish to provide matching sealing surfaces GATE fully guided and precision fitted to ensure tight sealing performance Heat treaded stainless steel STEM with precision machined ACME threads for long-lasting service Machined BACKSEAT BUSHING to provide a secondary metal-to-metal stem seal
3
u u
u
u
u u
RISING STEM for visual position indication Austenitic ductile iron STEM NUT to provide resistance to heat, corrosion and wear Two-piece self-aligning GLAND and GLAND FLANGE to prevent stem damage High strength alloy steel STUD BOLTS and heavy series HEX NUTS used Large diameter HANDWHEEL for easy operation Lubrication fitting for STEM NUT lubrication to minimize operation torque and stem wear
DELTA PACIFIC VALVE MFG CO
GATE VALVES STANDARD MATERIALS OF CONSTRUCTION ASME B16.34 Material Group Carbon Steel C-Mn Steel Alloy Steel 1.1 1.2 1.9 1.10 1.13 A216 Gr. WCB A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5 ← 13% Chromium ASTM A182 Grade F6a → B7 / 2H L7 / 7 ← ASTM A193 Gr. B16 / ASTM A194 Gr. 2H → ← Steel → ← Austenitic Ductile Iron ASTM A439 Type D2 → ← Steel → ← Ductile or Malleable Iron → ← Steel → ← Carbon Steel ASTM A307 Grade B → Corrosion-Resistant Steel ASME B16.34 Material Group Duplex 2.1 2.2 UNS J92205 A351 Gr. CF8 A351 Gr. CF3 A351 Gr. CF8M A351 Gr. CF3M A890 Gr. 4A 304 304L 316 316L F51 ← Corrosion-Resistant Steel ASTM A193 Grade B8 / ASTM A194 Grade 8 → ← Steel → ← Austenitic Ductile Iron ASTM A439 Type D2 → ← Steel → ← Ductile or Malleable Iron → ← Steel → ← Corrosion-Resistant Steel ASTM A193 Grade B8 / ASTM A194 Grade 8 →
Part Body / Bonnet / Yoke Gland Bonnet Bolt / Nut Gland Flange Stem Nut Threaded Bushing Handwheel Handwheel Nut Gland Eyebolt / Nut Part Body / Bonnet / Yoke Gland Bonnet Bolt / Nut Gland Flange Stem Nut Threaded Bushing Handwheel Handwheel Nut Gland Eyebolt / Nut
Note: Other materials available upon request.
Part Gate Seat Ring Stem Backseat Part Gate Seat Ring Stem Backseat
Trim Materials API Trim No. 1 13Cr 13Cr 13Cr 13Cr
2 304 304 304 304
5 HF HF 13Cr 13Cr
6 Ni-Cu 13Cr 13Cr 13Cr
A 304 HF 304 304
B HF HF 304 304
C HF HF 316 316
D HF HF NiCu NiCu
8 9 10 13Cr NiCu 316 HF NiCu 316 13Cr NiCu 316 13Cr NiCu 316 DPV Trim No. E F G 13Cr 13Cr HF 13Cr HF HF F51 F51 F51 13Cr 13Cr 13Cr
11 NiCu HF NiCu NiCu
12 316 HF 316 316
H HF HF F51 316
I 13Cr 13Cr F51 F51
13
14
Alloy 20 Alloy 20 Alloy 20
HF
Alloy 20 Alloy 20 Alloy 20 Alloy 20
J 13Cr HF F51 F51
K HF HF F51 F51
Note: Trim will be supplied either as a base material equal to body with weld overlay or solid trim at manufacturer's option.
DELTA PACIFIC VALVE MFG CO
4
GATE VALVES DIMENSIONS Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36"
Size
DPV® Figure Numbers ANSI Class Material 150 300 A216 Gr. WCB 1512F 3012F A352 Gr. LCC 151CF 301CF A217 Gr. WC6 1516F 3016F A217 Gr. WC9 1519F 3019F A217 Gr. C5 1515F 3015F A351 Gr. CF8 1514F 3014F A351 Gr. CF3 1514LF 3014LF A351 Gr. CF8M 1513F 3013F A351 Gr. CF3M 1513LF 3013LF A890 Gr. 4A 151DF 301DF
5
2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
ANSI Class 150 Dimensions (mm) L 178 191 203 229 254 267 292 330 356 381 406 432 457 508 559 610 610 660 711
H 409 442 508 590 610 630 960 1,158 1,378 1,543 1,738 1,959 2,214 2,599 2,750 2,825 3,180 3,269 3,736
W 200 200 250 250 300 300 350 400 450 500 600 600 680 760 800 800 800 800 800
ANSI Class 300 Dimensions (mm) L 216 241 283 305 381 403 419 457 502 762 838 914 991 1,143
H 424 460 535 615 662 795 1,012 1,231 1,450 1,645 1,841 1,943 2,154 2,598
W 200 200 250 250 300 350 400 450 500 600 600 680 800 800
DELTA PACIFIC VALVE MFG CO
Approx. Wt. ( lb. ) 40 55 75 119 148 194 318 434 657 895 1,155 1,588 2,463 3,233 3,607 4,258 4,540 5,270 7,365
( kg. ) 18 25 34 54 67 88 144 197 298 406 524 720 1,117 1,466 1,636 1,931 2,059 2,390 3,340
Approx. Wt. ( lb. ) 57 97 117 168 203 322 481 776 1,041 1,530 2,381 2,723 3,649 5,116
( kg. ) 26 44 53 76 92 146 218 352 472 694 1,080 1,235 1,655 2,320
GATE VALVES DIMENSIONS Size 2" 2½" 3" 4" 6" 8" 10" 12" 14" 16" 18"
Size 2" 3" 4" 6" 8" 10" 12" 14" 16"
Size 2" 3" 4" 6" 8" 10" 12" 14" 16"
ANSI Class 600 Dimensions (mm) L 292 330 356 432 559 660 787 838 889 991 1,092
H 458 508 570 690 910 1,064 1,257 1,468 1,623 1,816 2,260
W 250 250 250 350 450 500 600 680 760 760 800
ANSI Class 900 Dimensions (mm) L 368 381 457 610 737 838 965 1,029 1,130
H 620 695 825 1,065 1,320 1,540 1,840 2,025 2,170
W 300 350 400 500 600 750 800 800 800
ANSI Class 1500 Dimensions (mm) L 368 470 546 705 832 991 1,130 1,257 1,384
H 559 711 838 1,397 1,822 2,051 2,134 2,267 2,420
W 250 400 500 600 800 800 800 800 800
Approx. Wt. ( lb. ) 101 121 141 282 587 924 1,663 2,163 2,902 3,687 4,564
( kg. ) 46 55 64 128 266 419 754 981 1,316 1,672 2,070
Approx. Wt. ( lb. ) 209 276 423 833 1,400 1,985 3,418 4,785 6,769
( kg. ) 95 125 192 378 635 900 1,550 2,170 3,070
Approx. Wt. ( lb. ) 214 370 611 1,411 2,602 4,670 7,153 8,143 10,782
( kg. ) 97 168 277 640 1,180 2,118 3,244 3,693 4,890
Material
DPV® Figure Numbers ANSI Class
600 A216 Gr. WCB 6012F A352 Gr. LCC 601CF A217 Gr. WC6 6016F A217 Gr. WC9 6019F A217 Gr. C5 6015F A351 Gr. CF8 6014F A351 Gr. CF3 6014LF A351 Gr. CF8M 6013F A351 Gr. CF3M 6013LF A890 Gr. 4A 601DF
DELTA PACIFIC VALVE MFG CO
900 9012F 901CF 9016F 9019F 9015F 9014F 9014LF 9013F 9013LF 901DF
1500 15012F 1501CF 15016F 15019F 15015F 15014F 15014LF 15013F 15013LF 1501DF
6
GLOBE VALVES GLOBE VALVE DESIGN FEATURES Swivel Plug Disc Design Standard u Flat and Regulating Type Disc Available u Bolted Bonnet Construction u Outside Screw and Yoke, Rising Stem u Manual Operated, Actuation Available u Renewable Threaded-In Backseat Bushing u Renewable Threaded-In or Welded-In Seat Ring u
u u u
u u
Design Shell Thickness Flanged Ends
Face-to-Face Testing
Typical Construction
: BS 1873 / API 600 : BS 1873 / API 600 (Sizes ≤ 24") : ANSI B16.5 MSS SP-44 (Sizes > 24") API 605 (Sizes > 24") : ANSI B16.10 : API 598 / BS 6755 Part 1 No. 1 2 3 4 5 6 7 8 9 10 11 13 14 15 / 16 17 18 19 27 / 28 29
Part Name Body Bonnet Disc Seat Ring Stem Backseat Bushing Gland Bushing Gland Flange Packing Gasket Yoke Bushing Handwheel Handwheel Nut Stud Bolt / Hex Nut Eyebolt Pin Hex Nut Disc Washer / Nut Washer
Note: Weld end valves available upon request
Heavy duty BODY with shell thickness to API / BS standards (where applicable) u SEAT RING and WEDGE DISC ground and lapped to a mirror finish to provide matching sealing surfaces u Plug Type DISC supplied as standard. Flat and Regulating Type DISC available upon request. u Heat treaded stainless steel STEM with precision machined ACME threads for long-lasting service u Machined BACKSEAT BUSHING to provide a secondary metal-to-metal stem seal
u
7
RISING STEM for open/close position indication u Austenitic ductile iron YOKE SLEEVE to provide resistance to heat, corrosion and wear u Two piece self-aligning GLAND BUSHING and GLAND FLANGE to prevent stem damage u High strength alloy steel STUD BOLTS and heavy series HEX NUTS used u Large diameter HANDWHEEL for easy operation u Optional Deep Stuffing Box with Lantern Ring u Angle and Y Body Patterns available u
DELTA PACIFIC VALVE MFG CO
GLOBE VALVES STANDARD MATERIALS OF CONSTRUCTION ANSI B16.34 Material Group Carbon Steel C-Mn Steel Alloy Steel 1.1 1.2 1.9 1.10 1.13 A216 Gr. WCB A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5 ← 13% Chromium ASTM A182 Gr. F6a → B7 / 2H L7 / 7 ← ASTM A193 Gr. B16 / ASTM A194 Gr. 2H → ← Carbon Steel → ← Austenitic Ductile Iron ASTM A439 Type D2 → ← Ductile / Malleable Iron → ← Carbon Steel → ← Carbon Steel ASTM A307 Gr. B → Corrosion Resistant Steel 2.1 2.2 3.17 A351 Gr. CF3 A351 Gr. CF8 A351 Gr. CF8M A351 Gr. CF3M A351 Gr. CN7M 316L SS Alloy 20 304SS 304L SS 316SS ← Corrosion Resistant Steel ASTM A193 Gr. B8 / ASTM A194 Gr. 8 → ← Corrosion Resistant Steel → ← Austenitic Ductile Iron ASTM A439 Type D2 → ← Ductile / Malleable Iron → ← Carbon Steel → ← Corrosion Resistant Steel ASTM A193 Gr. B8 / ASTM A194 Gr. 8 →
Part Body / Bonnet Gland Bushing Stud Bolts & Hex Nuts Yoke / Gland Flange Yoke Bushing Handwheel Handwheel Nut Gland Eyebolts & Nuts Part Body / Bonnet Gland Bushing Stud Bolts & Hex Nuts Yoke / Gland Flange Yoke Bushing Handwheel Handwheel Nut Gland Eyebolts & Nuts
Note: Other materials available upon request.
Part Disc Seat Ring Stem Backseat Washer / Nut Part Disc Seat Ring Stem Backseat Washer / Nut
Trim Materials API Trim No. 1 F6 F6 F6 F6 F6
2 5 304SS HF 304SS HF 304SS F6 304SS F6 304SS F6 API Trim No.
16 HF HF 316SS 316SS 316SS
17 18 HF HF HF HF 347SS Alloy 20 347SS Alloy 20 347SS Alloy 20
8 F6 HF F6 F6 F6
9 Ni-Cu Ni-Cu Ni-Cu Ni-Cu Ni-Cu
10 316SS 316SS 316SS 316SS 316SS
11 12 Ni-Cu 316SS HF HF Ni-Cu 316SS Ni-Cu 316SS Ni-Cu 316SS DPV Trim No.
A HF HF Ni-Cu Ni-Cu Ni-Cu
B Bronze Bronze Brass Brass Brass
C F6 PTFE F6 F6 F6
D 304SS PTFE 304SS 304SS 304SS
E 316SS PTFE 316SS 316SS 316SS
13
14
15 HF Alloy 20 HF HF Alloy 20 Alloy 20 304SS Alloy 20 Alloy 20 304SS Alloy 20 Alloy 20 304SS Alloy 20 Alloy 20
F Ni-Cu PTFE Ni-Cu Ni-Cu Ni-Cu
G Alloy 20
PTFE Alloy 20 Alloy 20 Alloy 20
H Bronze PTFE Brass Brass Brass
Note: Trim will be supplied either as a base material equal to body with overlay or solid trim at manufacturer's option.
DELTA PACIFIC VALVE MFG CO
8
GLOBE VALVES DIMENSIONS
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
Size
DPV Figure Numbers ANSI Class Material 150 300 A216 Gr. WCB 1522F 3022F A352 Gr. LCC 152CF 302CF A217 Gr. WC6 1526F 3026F A217 Gr. WC9 1529F 3029F A217 Gr. C5 1525F 3025F A351 Gr. CF8 3024F 1524F A351 Gr. CF3 1524LF 3024LF A351 Gr. CF8M 1523F 3023F A351 Gr. CF3M 1523LF 3023LF A351 Gr. CN7M 1527F 3027F
9
2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
ANSI Class 150 Dimensions (mm) L 203 216 241 292 356 406 495 622 699 787 914 978 978 1,295
H 350 403 405 478 513 555 610 730 1,008 1,200 1,270 1,300 1,350 1,450
W 200 250 250 350 350 350 450 500 600 600 650 650 700 750
ANSI Class 300 Dimensions (mm) L 267 292 318 356 400 445 559 622 711 838 864 978 1,016 1,346
H 420 435 450 520 620 650 800 1,040 1,140 1,250 1,295 1,340 1,385 1,475
DELTA PACIFIC VALVE MFG CO
W 200 250 250 350 400 450 500 500 600 700 750 800 915 915
Approx. Wt. ( lb. ) 49 66 93 132 170 214 355 679 904 1,191 1,676 2,315 2,701 3,638
( kg. ) 22 30 42 60 77 97 161 308 410 540 760 1,050 1,225 1,650
Approx. Wt. ( lb. ) 61 110 126 182 298 331 875 1,162 1,341 1,687 2,426 3,241 3,704 5,457
( kg. ) 28 50 57 83 135 150 397 527 608 765 1,100 1,470 1,680 2,475
GLOBE VALVES DIMENSIONS Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16"
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12"
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12"
ANSI Class 600 Dimensions (mm) L 292 330 356 432 508 559 660 787 838 889 991
H 457 470 584 660 820 850 1,050 1,140 1,320 1,350 1,550
W 250 300 350 450 500 550 600 600 750 800 800
ANSI Class 900 Dimensions (mm) L 368 419 381 457 559 610 737 838 965
H 495 540 600 655 670 780 1,050 1,300 1,480
W 300 350 350 500 500 600 600 750 800
ANSI Class 1500 Dimensions (mm) L 368 419 470 546 673 705 832 991 1,130
H 550 580 625 750 810 925 1,225 1,450 1,870
W 300 350 400 450 500 600 600 750 800
Approx. Wt. ( lb. ) 95 161 179 329 463 919 1,195 1,526 2,150 2,459 3,263
( kg. ) 43 73 81 149 210 417 542 692 975 1,115 1,480
Approx. Wt. ( lb. ) 212 174 258 392 673 783 1,610 2,315 2,977
( kg. ) 96 79 117 178 305 355 730 1,050 1,350
Approx. Wt. ( lb. ) 256 276 320 463 871 1,047 2,040 3,010 4,851
( kg. ) 116 125 145 210 395 475 925 1,365 2,200
Material
DPV Figure Numbers ANSI Class
600 A216 Gr. WCB 6022F A352 Gr. LCC 602CF A217 Gr. WC6 6026F A217 Gr. WC9 6029F A217 Gr. C5 6025F A351 Gr. CF8 6024F A351 Gr. CF3 6024LF A351 Gr. CF8M 6023F A351 Gr. CF3M 6023LF A351 Gr. CN7M 6027F
DELTA PACIFIC VALVE MFG CO
900 9022F 902CF 9026F 9029F 9025F 9024F 9024LF 9023F 9023LF 9027F
1500 15022F 1502CF 15026F 15029F 15025F 15024F 15024LF 15023F 15023LF 15027F
10
SWING CHECK VALVES SWING CHECK VALVE DESIGN FEATURES Swing Disc Design u Regular Opening Type u Bolted Cover Construction u Internal Hinge Design Standard u Through-Body Hinge Pin Design Available u Renewable Threaded-In or Welded-In Seat Ring u
u u u
u u
Design Shell Thickness Flanged Ends
Face-to-Face Testing
Typical Construction
No. 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
: API 6D / BS 1868 / API 600 : API 6D / BS 1868 / API 600 (Sizes ≤ 24") : ANSI B16.5 MSS SP-44 (Sizes > 24") API 605 (Sizes > 24") : ANSI B16.10 / API 6D : API 598 / API 6D / BS 6755 Pt 1 Part Name Body Seat Ring Disc Hinge Disc Washer Disc Nut Hinge Pin Bracket Stud Bolt Hex Nut Washer Capscrew Nameplate Cover Lifting Lug
Note: Weld end valves available upon request
u
Heavy duty BODY with shell thickness to API / BS standards (where applicable)
u
SEAT RING and DISC ground and lapped to a mirror finish to provide matching sealing surfaces
u
u
u
Standard internal HINGE design eliminates body penetration and allows ease of maintenance since all parts are accessible from the top and the valve can be serviced insitu
u
Through-body HINGE PIN design available for outside lever, counter weight or slam retarder
u
High strength alloy steel STUD BOLTS and heavy series HEX NUTS used
Free rotating DISC design to minimize localized wear on sealing surface Y Body Pattern available
11
DELTA PACIFIC VALVE MFG CO
SWING CHECK VALVES STANDARD MATERIALS OF CONSTRUCTION ANSI B16.34 Material Group Carbon Steel C-Mn Steel Alloy Steel 1.1 1.9 1.10 1.2 1.13 A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5 A216 Gr. WCB A352 Gr. LCC A216 Gr. WCB A352 Gr. LCC A217 Gr. WC9 A217 Gr. C5 A217 Gr. WC6 A193 Gr. B7 A320 Gr. L7 ← Alloy Steel ASTM A193 Gr. B16 → A194 Gr. 2H A194 Gr. 7 ← Carbon Steel ASTM A194 Gr. 2H → ← Alloy Steel → ← Carbon Steel → Corrosion Resistant Steel 2.1 3.17 2.2 A351 Gr. CF3 A351 Gr. CF8 A351 Gr. CF8M A351 Gr. CF3M A351 Gr. CN7M A351 Gr. CF8 A351 Gr. CF3 A351 Gr. CF8M A351 Gr. CF3M A351 Gr. CN7M ← ASTM A193 Gr. B8 → ← ASTM A193 Gr. B8M → ← ASTM A194 Gr. 8 → ← ASTM A194 Gr. 8M → ← Corrosion Resistant Steel →
Part Body / Cover Hinge / Bracket Stud Bolts Hex Nuts Washer / Capscrew Part Body / Cover Hinge / Bracket Stud Bolts Hex Nuts Washer / Capscrew
Note: Other materials available upon request.
Part Disc Seat Ring Disc Washer Disc Nut Hinge Pin Part Disc Seat Ring Disc Washer Disc Nut Hinge Pin
Trim Materials API Trim No. 1 F6 F6 F6 F6 F6
2 5 304SS HF 304SS HF 304SS F6 304SS F6 304SS F6 API Trim No.
16 HF HF 316SS 316SS 316SS
17 18 HF HF HF HF 347SS Alloy 20 347SS Alloy 20 347SS Alloy 20
8 F6 HF F6 F6 F6
9 Ni-Cu Ni-Cu Ni-Cu Ni-Cu Ni-Cu
10 316SS 316SS 316SS 316SS 316SS
11 12 Ni-Cu 316SS HF HF Ni-Cu 316SS Ni-Cu 316SS Ni-Cu 316SS DPV Trim No.
A HF HF Ni-Cu Ni-Cu Ni-Cu
B Bronze Bronze Bronze Bronze Bronze
C F6 PTFE F6 F6 F6
D 304SS PTFE 304SS 304SS 304SS
E 316SS PTFE 316SS 316SS 316SS
13
14
15 HF Alloy 20 HF HF Alloy 20 Alloy 20 304SS Alloy 20 Alloy 20 304SS Alloy 20 Alloy 20 304SS Alloy 20 Alloy 20
F Ni-Cu PTFE Ni-Cu Ni-Cu Ni-Cu
G Alloy 20
PTFE Alloy 20 Alloy 20 Alloy 20
H Bronze PTFE Bronze Bronze Bronze
Note: Trim will be supplied either as a base material equal to body with overlay or solid trim at manufacturer's option.
Type S.S. Spiral Wound Soft Iron Ring l Standard ¡ Optional
150 l N/A
Gasket Materials ANSI Class 300 600 l ¡ l N/A
900 ¡ l
1500 ¡ l
Other types available upon request.
DELTA PACIFIC VALVE MFG CO
12
SWING CHECK VALVES DIMENSIONS
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
Size
DPV Figure Numbers ANSI Class Material 150 300 A216 Gr. WCB 1532F 3032F A352 Gr. LCC 153CF 303CF A217 Gr. WC6 1536F 3036F A217 Gr. WC9 1539F 3039F A217 Gr. C5 1535F 3035F A351 Gr. CF8 3034F 1534F A351 Gr. CF3 1534LF 3034LF A351 Gr. CF8M 1533F 3033F A351 Gr. CF3M 1533LF 3033LF A351 Gr. CN7M 1537F 3037F
13
2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
ANSI Class 150 Dimensions (mm) L 203 216 241 292 330 356 495 622 699 787 864 978 978 1,295
H 156 170 180 213 229 307 357 390 410 415 460 570 625 675
D 152 178 191 229 254 279 343 406 483 533 597 635 699 813
ANSI Class 300 Dimensions (mm) L 267 292 318 356 400 445 533 622 711 838 864 978 1,016 1,346
H 198 203 222 266 292 326 400 455 543 500 545 605 675 785
DELTA PACIFIC VALVE MFG CO
D 165 191 210 254 279 318 381 445 521 584 648 711 775 914
Approx. Wt. ( lb. ) 42 57 62 105 152 172 293 587 765 994 1,226 1,738 2,020 2,811
( kg. ) 19 26 28 48 69 78 133 266 347 451 556 788 916 1,275
Approx. Wt. ( lb. ) 46 66 94 146 185 276 430 666 858 1,433 1,764 2,139 2,977 4,873
( kg. ) 21 30 43 66 84 125 195 302 389 650 800 970 1,350 2,210
SWING CHECK VALVES DIMENSIONS Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16"
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12"
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12"
ANSI Class 600 Dimensions (mm) L 292 330 356 432 508 559 660 787 838 889 991
H 224 245 278 307 498 394 468 554 575 580 630
D 165 191 210 273 330 356 419 508 559 603 686
ANSI Class 900 Dimensions (mm) L 368 419 381 457 559 610 737 838 965
H 195 235 260 275 320 370 435 520 530
D 216 244 241 292 349 381 470 546 610
ANSI Class 1500 Dimensions (mm) L 368 419 470 546 673 705 832 991 1,130
H 220 270 290 310 350 410 485 737 875
D 216 244 267 311 375 394 483 584 673
Approx. Wt. ( lb. ) 76 139 165 212 355 501 763 1,202 1,720 1,929 2,370
( kg. ) 34 63 75 96 161 227 346 545 780 875 1,075
Approx. Wt. ( lb. ) 121 154 198 298 364 650 1,158 1,985 2,370
( kg. ) 55 70 90 135 165 295 525 900 1,075
Approx. Wt. ( lb. ) 154 187 254 386 397 816 1,499 3,711 5,281
( kg. ) 70 85 115 175 180 370 680 1,683 2,395
Material
DPV Figure Numbers ANSI Class
600 A216 Gr. WCB 6032F A352 Gr. LCC 603CF A217 Gr. WC6 6036F A217 Gr. WC9 6039F A217 Gr. C5 6035F A351 Gr. CF8 6034F A351 Gr. CF3 6034LF A351 Gr. CF8M 6033F A351 Gr. CF3M 6033LF A351 Gr. CN7M 6037F
DELTA PACIFIC VALVE MFG CO
900 9032F 903CF 9036F 9039F 9035F 9034F 9034LF 9033F 9033LF 9037F
1500 15032F 1503CF 15036F 15039F 15035F 15034F 15034LF 15033F 15033LF 15037F
14
API 600 CAST STEEL VALVES BEVEL GEAR OPERATOR
Model No. BG-0 BG-1 BG-2 BG-3
Torque ft-lbf 540 1,100 2,210 4,420
NM 735 1,500 3,000 6,000
Thrust lbf 22,030 44,060 78,680 141,630
kN 98 196 350 630
Ratio 3:1 4.1:1 6:1 19.3:1
L mm 218 289 385 510
L1 mm 467 555 694 877
H mm 140 160 230 270
Weight
W mm 308 460 610 610
lb 53 93 192 340
900 BG-0 BG-0 BG-0 BG-1 BG-2 BG-2 BG-3 -
1500 BG-0 BG-0 BG-1 BG-1 BG-2 BG-3 -
kg 24 42 87 154
Bevel Gear Operator Sizing Valve Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 36"
Gate Valve ANSI Class 150 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 BG-1 BG-1 BG-2 BG-2 BG-2 BG-3 BG-3
300 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 BG-1 BG-1 BG-2 BG-2 BG-3 BG-3 BG-3 BG-3 -
600 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 BG-1 BG-2 BG-2 BG-2 BG-3 BG-3 -
Globe Valve ANSI Class 900 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 BG-2 BG-2 BG-3 BG-3 BG-3 -
1500 BG-0 BG-0 BG-0 BG-0 BG-1 BG-1 BG-2 BG-3 BG-3 -
150 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 BG-1 BG-2 BG-2 BG-3 BG-3 -
300 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 BG-1 BG-2 BG-3 BG-3 -
600 BG-0 BG-0 BG-0 BG-0 BG-1 BG-2 BG-3 BG-3 -
Note: BOLD & ITALIC means bevel gear operator recommended.
15
DELTA PACIFIC VALVE MFG CO
Valve Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 36"
Model No. BG-0 BG-1 BG-2 BG-3
API 600 CAST STEEL VALVES OPTIONAL MODIFICATIONS u u u u u u u u u u u u u
SPECIAL SERVICES Extended Stem / Handwheel Elevations Extended Bonnet / Elevated Stuffing Box Floorstands / Universal Joints Soft Seal Inserts on Disc or Seat(s) Lantern Ring / Leak-Out Port Live-Loaded Packing Oxygen / Chlorine Service Double Block & Bleed Operation Quick Closing / Opening Operation Fail Closed / Fail Open Operation Outside Lever & Weight for Check Valves Slam Retarder for Check Valves Bypass Piping ( see below )
u u u u u u
NON-DESTRUCTIVE TESTING u Radiographic Examination u Magnetic Particle Examination u Dye Penetrant Examination
OPERATION Hammer-Blow / Impactor Handwheels Bevel Gear / Chainwheel Operator Multi-Turn Electric Actuator Linear Pneumatic Actuator Linear Hydraulic Actuator Linear Electro-Hydraulic Actuator Chainwheel Operator Suitable for Valve Handwheel Ø No. 2" to 4" 0 4¼" to 5¾" 1 6" to 7½" 1½ 7¾" to 9" 2 9¼" to 12½" 2½ 12¾" to 15½" 3 15¾" to 19" 3½ 19¼" to 22" 4 22¼" to 26" 4½ 26¼" to 36" 5
AUXILIARY CONNECTIONS
Nominal Valve Size Connection Size
2" to 4" ½"
5" to 8" ¾"
10" to 12" 1"
14" and Larger 1½"
* Same location on the other side.
DELTA PACIFIC VALVE MFG CO
16
API 600 CAST STEEL VALVES END FLANGE DIMENSIONS (in.)
Size 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 22 26 28 30 36 26 28 30 36
17
ANSI / ASME B16.5 Class 150 R.F. ( 1/16" Raised Face ) T OD G BCD Bolt No. of Stud Hole Bolt Bolt Outside Companion Valve R.F. Bolt Ø Flange Flange Ø Circle Ø Ø Holes Ø
L Bolt Length
Size
6 3/4 5/8 3 5/8 4 3/4 3/4 4 5/8 3 7 7/8 11/16 4 1/8 5 1/2 3/4 4 5/8 3 1/4 7 1/2 15/16 15/16 5 6 3/4 4 5/8 3 3/4 9 15/16 15/16 6 3/16 7 1/2 3/4 8 5/8 3 3/4 10 15/16 15/16 7 5/16 8 1/2 7/8 8 3/4 4 11 1 1 8 1/2 9 1/2 7/8 8 3/4 4 13 1/2 1 1/8 1 1/8 10 5/8 12 7/8 8 3/4 4 1/4 16 1 3/16 1 3/16 12 3/4 14 1/4 1 12 7/8 4 3/4 19 1 1/4 1 1/4 15 17 1 12 7/8 4 3/4 21 1 3/8 1 3/8 16 1/4 18 3/4 1 1/8 12 1 5 1/4 23 1/2 1 7/16 1 7/16 18 1/2 21 1/4 1 1/8 16 1 5 1/2 25 1 9/16 1 9/16 21 22 3/4 1 1/4 16 1 1/8 6 27 1/2 1 11/16 1 11/16 23 25 1 1/4 20 1 1/8 6 1/4 32 1 7/8 1 7/8 27 1/4 29 1/2 1 3/8 20 1 1/4 6 3/4 MSS SP-44 / ASME B16.47 Series A Class 150 R.F. ( 1/16" Raised Face ) 29 1/2 1 13/16 1 13/16 25 1/4 27 1/4 1 3/8 20 1 1/4 6 3/4 34 1/4 2 11/16 2 11/16 29 1/2 31 3/4 1 3/8 24 1 1/4 8 1/2 36 1/2 2 13/16 2 13/16 31 1/2 34 1 3/8 28 1 1/4 8 3/4 38 3/4 2 15/16 2 15/16 33 3/4 36 1 3/8 28 1 1/4 9 46 3 9/16 3 9/16 40 1/4 42 3/4 1 5/8 32 1 1/2 10 3/4 API 605 / ASME B16.47 Series B Class 150 R.F. ( 1/16" Raised Face ) 30 15/16 1 5/8 1 5/8 28 29 5/16 7/8 36 3/4 5 1/2 32 15/16 1 3/4 1 3/4 30 31 5/16 7/8 40 3/4 5 3/4 34 15/16 1 3/4 1 3/4 32 33 5/16 7/8 44 3/4 5 3/4 41 5/8 2 1/16 2 1/16 38 1/4 39 3/4 1 44 7/8 6 1/2
2 2½ 3 4 5 6 8 10 12 14 16 18 20 24
DELTA PACIFIC VALVE MFG CO
22 26 28 30 36 26 28 30 36
API 600 CAST STEEL VALVES END FLANGE DIMENSIONS (in.)
Size 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 22 26 28 30 36 26 28 30 36
ANSI / ASME B16.5 Class 300 R.F. ( 1/16" Raised Face ) OD T G BCD L Bolt No. of Stud Hole Bolt Bolt Outside Flange R.F. Bolt Bolt Ø Ø Circle Ø Ø Holes Ø Length Thickness 6 1/2 7/8 3 5/8 5 3/4 8 5/8 3 1/2 7 1/2 1 4 1/8 5 7/8 7/8 8 3/4 4 8 1/4 1 1/8 5 6 5/8 7/8 8 3/4 4 1/4 10 1 1/4 6 3/16 7 7/8 7/8 8 3/4 4 1/2 11 1 3/8 7 5/16 9 1/4 7/8 8 3/4 4 3/4 12 1/2 1 7/16 8 1/2 10 5/8 7/8 12 3/4 4 3/4 15 1 5/8 10 5/8 13 1 12 7/8 5 1/2 17 1/2 1 7/8 12 3/4 15 1/4 1 1/8 16 1 6 1/4 20 1/2 2 15 17 3/4 1 1/4 16 1 1/8 6 3/4 23 2 1/8 16 1/4 20 1/4 1 1/4 20 1 1/8 7 25 1/2 2 1/4 18 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 28 2 3/8 21 24 3/4 1 3/8 24 1 1/4 7 3/4 30 1/2 2 1/2 23 27 1 3/8 24 1 1/4 8 36 2 3/4 27 1/4 32 1 5/8 24 1 1/2 9 MSS SP-44 / ASME B16.47 Series A Class 300 R.F. ( 1/16" Raised Face ) 33 2 5/8 25 1/4 29 1/4 1 5/8 24 1 1/2 9 38 1/4 3 1/8 29 1/2 34 1/2 1 3/4 28 1 5/8 10 1/4 40 3/4 3 3/8 31 1/2 37 1 3/4 28 1 5/8 10 3/4 43 3 5/8 33 3/4 39 1/4 1 7/8 28 1 3/4 11 1/2 50 4 1/8 40 1/4 46 2 1/8 32 2 13 API 605 / ASME B16.47 Series B Class 300 R.F. ( 1/16" Raised Face ) 34 1/8 3 1/2 29 31 5/8 1 3/8 32 1 1/4 10 1/4 36 1/4 3 1/2 31 33 3/4 1 3/8 36 1 1/4 10 1/4 39 3 11/16 33 1/4 36 1/4 1 1/2 36 1 3/8 10 3/4 46 1/8 4 1/16 39 3/4 42 7/8 1 3/4 32 1 5/8 12
DELTA PACIFIC VALVE MFG CO
Size 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 22 26 28 30 36 26 28 30 36
18
API 600 CAST STEEL VALVES END FLANGE DIMENSIONS (in.)
Size 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 36 26 28 30 36
19
ANSI / ASME B16.5 Class 600 R.F. ( 1/4" Raised Face ) OD T G BCD L Bolt No. of Stud Hole Bolt Bolt Outside Flange R.F. Bolt Bolt Ø Ø Circle Ø Ø Holes Ø Length Thickness 6 1/2 7 1/2 8 1/4 10 3/4 13 14 16 1/2 20 22 23 3/4 27 29 1/4 32 37 MSS SP-44 40 42 1/4 44 1/2 47 51 3/4 API 605 / 35 37 1/2 40 1/4 47 3/4
1 3 5/8 5 3/4 8 5/8 4 1/4 1 1/8 4 1/8 5 7/8 7/8 8 3/4 4 3/4 1 1/4 5 6 5/8 7/8 8 3/4 5 1 1/2 6 3/16 8 1/2 1 8 7/8 5 3/4 1 3/4 7 5/16 10 1/2 1 1/8 8 1 6 1/2 1 7/8 8 1/2 11 1/2 1 1/8 12 1 6 3/4 2 3/16 10 5/8 13 3/4 1 1/4 12 1 1/8 7 1/2 2 1/2 12 3/4 17 1 3/8 16 1 1/4 8 1/2 2 5/8 15 19 1/4 1 3/8 20 1 1/4 8 3/4 2 3/4 16 1/4 20 3/4 1 1/2 20 1 3/8 9 1/4 3 18 1/2 23 3/4 1 5/8 20 1 1/2 10 3 1/4 21 25 3/4 1 3/4 20 1 5/8 10 3/4 3 1/2 23 28 1/2 1 3/4 24 1 5/8 11 1/4 4 27 1/4 33 2 24 1 7/8 13 / ASME B16.47 Series A Class 600 R.F. ( 1/4" Raised Face ) 4 1/4 29 1/2 36 2 28 1 7/8 9 3/4 4 3/8 31 1/2 38 2 1/8 28 2 10 4 1/2 33 3/4 40 1/4 2 1/8 28 2 10 1/4 4 5/8 36 42 1/2 2 3/8 28 2 1/4 10 1/2 4 7/8 40 1/4 47 2 5/8 28 2 1/2 11 ASME B16.47 Series B Class 600 R.F. ( 1/4" Raised Face ) 4 3/8 28 5/8 31 3/4 1 3/4 28 1 5/8 13 1/4 4 9/16 30 7/8 34 1 7/8 28 1 3/4 13 3/4 4 15/16 33 1/8 36 1/2 2 28 1 7/8 14 3/4 5 49/64 39 3/4 43 1/2 2 3/8 28 2 1/4 17 1/4
DELTA PACIFIC VALVE MFG CO
Size 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 36 26 28 30 36
API 600 CAST STEEL VALVES END FLANGE DIMENSIONS (in.)
Size 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 36 26 28 30 36
ANSI / ASME B16.5 Class 900 R.F. ( 1/4" Raised Face ) OD T G BCD L Bolt No. of Stud Hole Bolt Bolt Outside Flange R.F. Bolt Bolt Ø Ø Circle Ø Ø Holes Ø Length Thickness 8 1/2 1 1/2 3 5/8 6 1/2 1 8 7/8 5 3/4 9 5/8 1 5/8 4 1/8 7 1/2 1 1/8 8 1 6 1/4 9 1/2 1 1/2 5 7 1/2 1 8 7/8 5 3/4 11 1/2 1 3/4 6 3/16 9 1/4 1 1/4 8 1 1/8 6 3/4 13 3/4 2 7 5/16 11 1 3/8 8 1 1/4 7 1/2 15 2 3/16 8 1/2 12 1/2 1 1/4 12 1 1/8 7 1/2 18 1/2 2 1/2 10 5/8 15 1/2 1 1/2 12 1 3/8 8 3/4 21 1/2 2 3/4 12 3/4 18 1/2 1 1/2 16 1 3/8 9 1/4 24 3 1/8 15 21 1 1/2 20 1 3/8 10 25 1/4 3 3/8 16 1/4 22 1 5/8 20 1 1/2 10 3/4 27 3/4 3 1/2 18 1/2 24 1/4 1 3/4 20 1 5/8 11 1/4 31 4 21 27 2 20 1 7/8 12 3/4 33 3/4 4 1/4 23 29 1/2 2 1/8 20 2 13 3/4 41 5 1/2 27 1/4 35 1/2 2 5/8 20 2 1/2 17 1/4 MSS SP-44 / ASME B16.47 Series A Class 900 R.F. ( 1/4" Raised Face ) 42 3/4 5 1/2 29 1/2 37 1/2 2 7/8 20 2 3/4 17 3/4 46 5 5/8 31 1/2 40 1/4 3 1/8 20 3 18 1/2 48 1/2 5 7/8 33 3/4 42 3/4 3 1/8 20 3 19 51 3/4 6 1/4 36 45 1/2 3 3/8 20 3 1/4 20 1/4 57 1/2 6 1/2 40 1/4 50 3/4 3 5/8 20 3 1/2 21 1/4 API 605 / ASME B16.47 Series B Class 900 R.F. ( 1/4" Raised Face ) 40 1/4 5 5/16 30 35 1/2 2 5/8 20 2 1/2 16 3/4 43 1/2 5 13/16 32 1/4 38 1/4 2 7/8 20 2 3/4 18 1/4 46 1/2 6 1/8 34 1/2 40 3/4 3 1/8 20 3 19 1/2 53 6 13/16 40 1/2 47 1/4 3 1/8 24 3 20 3/4
DELTA PACIFIC VALVE MFG CO
Size 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 36 26 28 30 36
20
API 600 CAST STEEL VALVES END FLANGE DIMENSIONS (in.)
Size ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24
21
ANSI / ASME B16.5 Class 1500 R.F. ( 1/4" Raised Face ) OD T G BCD L Bolt No. of Stud Hole Bolt Bolt Outside Flange R.F. Bolt Bolt Ø Ø Circle Ø Ø Holes Ø Length Thickness 4 3/4 5 1/8 5 7/8 6 1/4 7 8 1/2 9 5/8 10 1/2 12 1/4 14 3/4 15 1/2 19 23 26 1/2 29 1/2 32 1/2 36 38 3/4 46
7/8 1 1 1/8 1 1/8 1 1/4 1 1/2 1 5/8 1 7/8 2 1/8 2 7/8 3 1/4 3 5/8 4 1/4 4 7/8 5 1/4 5 3/4 6 3/8 7 8
1 3/8 1 6/8 2 2 1/2 2 7/8 3 5/8 4 1/8 5 6 3/16 7 5/16 8 1/2 10 5/8 12 3/4 15 16 1/4 18 1/2 21 23 27 1/4
3 1/4 3 1/2 4 4 3/8 4 7/8 6 1/2 7 1/2 8 9 1/2 11 1/2 12 1/2 15 1/2 19 22 1/2 25 27 3/4 30 1/2 32 3/4 39
7/8 7/8 1 1 1 1/8 1 1 1/8 1 1/4 1 3/8 1 5/8 1 1/2 1 3/4 2 2 1/8 2 3/8 2 5/8 2 7/8 3 1/8 3 5/8
4 4 4 4 4 8 8 8 8 8 12 12 12 16 16 16 16 16 16
3/4 3/4 7/8 7/8 1 7/8 1 1 1/8 1 1/4 1 1/2 1 3/8 1 5/8 1 7/8 2 2 1/4 2 1/2 2 3/4 3 3 1/2
4 1/4 4 1/2 5 5 5 1/2 5 3/4 6 1/4 7 7 3/4 9 3/4 10 1/4 11 1/2 13 1/4 14 3/4 16 17 1/2 19 1/2 21 1/4 24 1/4
DELTA PACIFIC VALVE MFG CO
Size ½ ¾ 1 1¼ 1½ 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24
API 600 CAST STEEL VALVES ANSI CLASS 150 PRESSURE-TEMP RATINGS Temperature °F -20 to 100 200 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1,000 1,050 1,100 1,150 1,200 1,250 1,300 1,350 1,400 1,450 1,500
Pressure (psig) ANSI B16.34 Material Group 2.1 1.10 1.13
1.1
1.2
1.9
WCB1 285 260 230 215 200 185 170 155 140 125 110 95 80 65 50 35 20
LCC2 290 260 230 215 200 185 170 155 140 125
WC63 290 260 230 215 200 185 170 155 140 125 110 95 80 65 50 35 20
WC93 290 260 230 215 200 185 170 155 140 125 110 95 80 65 50 35 20
C53 290 260 230 215 200 185 170 155 140 125 110 95 80 65 50 35 20
20a 20a
20a 20a
20a 20a 20a 15a
CF84 275 230 205 198 190 180 170 155 140 125 110 95 80 65 50 35 20
CF35 275 230 205 198 190 180 170 155 140 125 110 95 80
2.2
3.17
Temp. °C
CF8M4 CF3M6 CN7M7 275 275 230 -29 to 38 93 235 235 200 149 215 215 180 177 205 205 170 204 195 195 160 232 183 183 155 260 170 170 150 288 155 155 145 316 140 140 140 343 125 125 371 110 110 399 95 95 427 80 80 454 65 65 482 50 510 35 538 20 a 566 20 a 593 20 a 621 20 a 649 20 a 677 20 a 704 20 a 732 20 a 760 20 a 788 20 a 816 20
20a 20a 20a 20a 20a 20a 20a 20a 15a 10a 1 Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C). 2
Not to be used over 650 °F (343 °C). Use normalized and tempered material only. 4 At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher. 5 Not to be used over 800 °F (427 °C). 6 Not to be used over 850 °F (454 °C). 7 Use solution annealed material only. a For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C). 3
DELTA PACIFIC VALVE MFG CO
22
API 600 CAST STEEL VALVES ANSI CLASS 300 PRESSURE-TEMP RATINGS Temperature °F -20 to 100 200 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1,000 1,050 1,100 1,150 1,200 1,250 1,300 1,350 1,400 1,450 1,500
Pressure (psig) ANSI B16.34 Material Group 2.1 1.10 1.13
1.1
1.2
1.9
WCB1 740 675 655 645 635 618 600 575 550 535 535 505 410 270 170 105 50
LCC2 750 750 730 718 705 685 665 635 605 590
WC63 750 750 720 708 695 680 665 635 605 590 570 530 510 485 450 320 215
WC93 750 750 730 718 705 685 665 635 605 590 570 530 510 485 450 375 260
C53 750 745 715 710 705 685 665 635 605 590 570 530 510 485 370 275 200
145a 95a
175a 110a
145a 100a 60a 35a
CF84 720 600 540 518 495 480 465 450 435 430 425 415 405 395 390 380 320
CF35 720 600 540 518 495 480 465 450 435 430 425 415 405
2.2
310a 345a 255a 305a a 200 235a 155a 185a 115a 145a a 85 115a 60a 95a 50a 75a a 35 60a 25a 40a 1 Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C). 2
Not to be used over 650 °F (343 °C). Use normalized and tempered material only. 4 At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher. 5 Not to be used over 800 °F (427 °C). 6 Not to be used over 850 °F (454 °C). 7 Use solution annealed material only. a For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C). 3
23
3.17
CF8M4 CF3M6 CN7M7 720 720 600 620 620 520 560 560 465 538 538 443 515 515 420 498 498 405 480 480 390 465 465 375 450 450 360 445 445 430 430 425 425 420 420 420 420 415 385 350
DELTA PACIFIC VALVE MFG CO
Temp. °C -29 to 38
93 149 177 204 232 260 288 316 343 371 399 427 454 482 510 538 566 593 621 649 677 704 732 760 788 816
API 600 CAST STEEL VALVES ANSI CLASS 600 PRESSURE-TEMP RATINGS Temperature °F -20 to 100 200 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1,000 1,050 1,100 1,150 1,200 1,250 1,300 1,350 1,400 1,450 1,500
Pressure (psig) ANSI B16.34 Material Group 2.1 1.10 1.13
1.1
1.2
1.9
WCB1 1,480 1,350 1,315 1,293 1,270 1,235 1,200 1,148 1,095 1,075 1,065 1,010 825 535 345 205 105
LCC2 1,500 1,500 1,455 1,433 1,410 1,370 1,330 1,270 1,210 1,175
WC63 1,500 1,500 1,445 1,415 1,385 1,358 1,330 1,270 1,210 1,175 1,135 1,065 1,015 975 900 640 430
WC93 1,500 1,500 1,455 1,433 1,410 1,370 1,330 1,270 1,210 1,175 1,135 1,065 1,015 975 900 755 520
C53 1,500 1,490 1,430 1,420 1,410 1,370 1,330 1,270 1,210 1,175 1,135 1,055 1,015 965 740 550 400
290a 190a
350a 220a
290a 200a 125a 70a
CF84 1,440 1,200 1,080 1,038 995 963 930 903 875 860 850 830 805 790 780 765 640
CF35 1,440 1,200 1,080 1,038 995 963 930 903 875 860 850 830 805
2.2
3.17
Temp. °C
CF8M4 CF3M6 CN7M7 1,440 1,440 1,200 -29 to 38 93 1,240 1,240 1,035 149 1,120 1,120 930 177 1,073 1,073 888 204 1,025 1,025 845 232 990 990 813 260 955 955 780 288 928 928 750 316 900 900 720 343 890 890 371 870 870 399 855 855 427 845 845 454 835 835 482 830 510 775 538 700 a 566 685 a 593 610 a 621 475 a 649 370 a 677 295 a 704 235 a 732 190 a 760 150 a 788 115 a 816 85
615a 515a 400a 310a 225a 170a 125a 95a 70a 55a 1 Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C). 2
Not to be used over 650 °F (343 °C). Use normalized and tempered material only. 4 At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher. 5 Not to be used over 800 °F (427 °C). 6 Not to be used over 850 °F (454 °C). 7 Use solution annealed material only. a For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C). 3
DELTA PACIFIC VALVE MFG CO
24
API 600 CAST STEEL VALVES ANSI CLASS 900 PRESSURE-TEMP RATINGS Temperature °F -20 to 100 200 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1,000 1,050 1,100 1,150 1,200 1,250 1,300 1,350 1,400 1,450 1,500
Pressure (psig) ANSI B16.34 Material Group 2.1 1.10 1.13
1.1
1.2
1.9
WCB1 2,220 2,025 1,970 1,935 1,900 1,848 1,795 1,718 1,640 1,610 1,600 1,510 1,235 805 515 310 155
LCC2 2,250 2,250 2,185 2,150 2,115 2,055 1,995 1,905 1,815 1,765
WC63 2,250 2,250 2,165 2,123 2,080 2,038 1,995 1,905 1,815 1,765 1,705 1,595 1,525 1,460 1,350 955 650
WC93 2,250 2,250 2,185 2,150 2,115 2,055 1,995 1,905 1,815 1,765 1,705 1,595 1,525 1,460 1,350 1,130 780
C53 2,250 2,235 2,150 2,133 2,115 2,055 1,995 1,905 1,815 1,765 1,705 1,585 1,525 1,450 1,110 825 595
430a 290a
525a 330a
430a 300a 185a 105a
CF84 2,160 1,800 1,620 1,555 1,490 1,443 1,395 1,353 1,310 1,290 1,275 1,245 1,210 1,190 1,165 1,145 965
CF35 2,160 1,800 1,620 1,555 1,490 1,443 1,395 1,353 1,310 1,290 1,275 1,245 1,210
2.2
925a 1,030a 770a 915a a 595 710a 465a 555a 340a 440a a 255 350a 185a 290a 145a 225a a 105 175a 80a 125a 1 Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C). 2
Not to be used over 650 °F (343 °C). Use normalized and tempered material only. 4 At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher. 5 Not to be used over 800 °F (427 °C). 6 Not to be used over 850 °F (454 °C). 7 Use solution annealed material only. a For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C). 3
25
3.17
CF8M4 CF3M6 CN7M7 2,160 2,160 1,800 1,860 1,860 1,555 1,680 1,680 1,395 1,610 1,610 1,330 1,540 1,540 1,265 1,488 1,488 1,215 1,435 1,435 1,165 1,395 1,395 1,123 1,355 1,355 1,080 1,330 1,330 1,305 1,305 1,280 1,280 1,265 1,265 1,255 1,255 1,245 1,160 1,050
DELTA PACIFIC VALVE MFG CO
Temp. °C -29 to 38
93 149 177 204 232 260 288 316 343 371 399 427 454 482 510 538 566 593 621 649 677 704 732 760 788 816
API 600 CAST STEEL VALVES ANSI CLASS 1500 PRESSURE-TEMP RATINGS Temperature °F -20 to 100 200 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1,000 1,050 1,100 1,150 1,200 1,250 1,300 1,350 1,400 1,450 1,500
Pressure (psig) ANSI B16.34 Material Group 2.1 1.10 1.13
1.1
1.2
1.9
WCB1 3,705 3,375 3,280 3,225 3,170 3,083 2,995 2,865 2,735 2,685 2,665 2,520 2,060 1,340 860 515 260
LCC2 3,750 3,750 3,640 3,585 3,530 3,428 3,325 3,175 3,025 2,940
WC63 3,750 3,750 3,610 3,538 3,465 3,395 3,325 3,175 3,025 2,940 2,840 2,660 2,540 2,435 2,245 1,595 1,080
WC93 3,750 3,750 3,640 3,585 3,530 3,428 3,325 3,175 3,025 2,940 2,840 2,660 2,540 2,435 2,245 1,885 1,305
C53 3,750 3,725 3,580 3,555 3,530 3,428 3,325 3,175 3,025 2,940 2,840 2,640 2,540 2,415 1,850 1,370 995
720a 480a
875a 550a
720a 495a 310a 170a
CF84 3,600 3,000 2,700 2,593 2,485 2,408 2,330 2,258 2,185 2,150 2,125 2,075 2,015 1,980 1,945 1,910 1,605
CF35 3,600 3,000 2,700 2,593 2,485 2,408 2,330 2,258 2,185 2,150 2,125 2,075 2,015
2.2
3.17
Temp. °C
CF8M4 CF3M6 CN7M7 3,600 3,600 3,000 -29 to 38 93 3,095 3,095 2,590 149 2,795 2,795 2,330 177 2,683 2,683 2,220 204 2,570 2,570 2,110 232 2,480 2,480 2,028 260 2,390 2,390 1,945 288 2,323 2,323 1,873 316 2,255 2,255 1,800 343 2,220 2,220 371 2,170 2,170 399 2,135 2,135 427 2,110 2,110 454 2,090 2,090 482 2,075 510 1,930 538 1,750 a 566 1,720 a 593 1,525 a 621 1,185 a 649 925 a 677 735 a 704 585 a 732 480 a 760 380 a 788 290 a 816 205
1,545a 1,285a 995a 770a 565a 430a 310a 240a 170a 135a 1 Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C). 2
Not to be used over 650 °F (343 °C). Use normalized and tempered material only. 4 At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher. 5 Not to be used over 800 °F (427 °C). 6 Not to be used over 850 °F (454 °C). 7 Use solution annealed material only. a For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C). 3
DELTA PACIFIC VALVE MFG CO
26
API 600 CAST STEEL VALVES SHELL MATERIAL SPECIFICATIONS
1
C Si1 Mn1 P1 S1 Cr1 Ni1 Mo1 Cu1 V1 T.S. Y.S.2 El.2 R.A.2
1
C Si1 Mn1 P1 S1 Cr Ni Mo1 Cu T.S.2 Y.S.2 El.2 1 2 3
Unit % % % % % % % % % % MPa MPa % %
Carbon and Alloy Steel Castings A216 Gr. WCB A217 Gr. C5 A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 3 4 0.200 0.05-0.20 0.05-0.18 0.300 0.250 0.600 0.750 0.50-0.80 0.40-0.70 1.0003 1.2004 0.040 0.045 5 0.500 1.00-1.50 2.00-2.75 4.00-6.50 0.500 5 0.500 0.500 0.500 0.45-0.65 0.90-1.20 0.45-0.65 0.200 0.2005 5 0.300 0.500 0.300 5 0.030 0.030 485-655 620-795 250 275 415 20.0 22.0 18.0 35.0
Unit % % % % % % % % % MPa MPa %
Corrosion Resistant Steel Castings A351 Gr. CF8 A351 Gr. CF8M A351 Gr. CF3 A351 Gr. CF3M A351 Gr. CN7M 0.08 0.03 0.07 2.00 2.00 1.50 1.50 1.50 0.04 0.04 18.0-21.0 17.0-21.0 19.0-22.0 8.0-11.0 9.0-12.0 8.0-12.0 9.0-13.0 27.5-30.5 0.50 0.50 2.0-3.0 2.0-3.0 3.0-4.0 485 425 205 170 35.0
Values listed are permitted maximums, unless otherwise stated. Values listed are required minimums, unless otherwise stated. For each reduction of 0.01% below the specified maximum carbon content, an increase of 0.04% Mn above the specified maximum will be permitted up to a maximum of 1.28%.
4
For each reduction of 0.01% below the specified maximum carbon content, an increase of 0.04% Mn above the specified maximum will be permitted up to a maximum of 1.40%.
5
Specified Residual Elements - The total content of these elements is 1.00% maximum.
27
DELTA PACIFIC VALVE MFG CO
API 600 CAST STEEL VALVES TRIM MATERIAL SPECIFICATIONS C1 Si1 Mn1 P1 S1 Cr Ni1 Mo N1 Tensile Str.2 Yield Str.2 Elongation2 Reduc. of Area2 Hardness
Unit % % % % % % % % % MPa MPa % % HB
Unit C1 Si1 Mn1 P1 S1 Cr Ni2 Mo1 Cu1 Fe1 Tensile Str.2 Yield Str.2 Elongation2 Reduc. of Area2 1 2 3 4 5 6
% % % % % % % % % % MPa MPa % %
Corrosion Resistant Alloys A182 Gr. F6a A182 Gr. F304 A182 Gr. F316 A182 Gr. F3473 0.150 0.080 1.000 1.000 2.000 0.040 0.030 11.5-13.5 18.0-20.0 16.0-18.0 17.0-20.0 0.500 8.0-11.0 10.0-14.0 9.0-13.0 2.0-3.0 0.100 4 485 515 205 275 30.0 18.0 35.0 50.0 143-187 Nonferrous Alloys Bolting 5 Carbon Steel Alloy Steel Ni-Cu Alloy Alloy 20 B462 A194 A193 UNS N04400 UNS N08020 B164 Gr. B7 Gr. 2H 0.37-0.49 0.400 Min. 0.070 0.300 0.15-0.35 0.400 0.500 1.000 0.65-1.10 1.000 2.000 0.035 0.040 0.045 0.040 0.050 0.024 0.035 0.75-1.20 19.0-21.0 6 32.0-38.0 63.0 0.15-0.25 2.0-3.0 28.0-34.0 3.0-4.0 6 2.500 Balance 860 480 551 720 170 241 18.0 35.0 30.0 50.0 50.0
Values listed are permitted maximums, unless otherwise stated. Values listed are required minimums, unless otherwise stated. Shall have a columbium plus tantalum content of not less than ten times the carbon content and not more than 1.10%. For sections over 5 inches in thickness, the minimum tensile strength shall be 485 MPa. Shall have a columbium plus tantalum content of not less than eight times the carbon content and not more than 1.0%. Shall be determined arithmetically by difference.
DELTA PACIFIC VALVE MFG CO
28
API 600 CAST STEEL VALVES HOW TO ORDER 1
5
1
2
ANSI Class
Valve Type
15 = ANSI Class 150 30 = ANSI Class 300 60 = ANSI Class 600 90 = ANSI Class 900 150 = ANSI Class 1500
1 = Gate, OS&Y, RS 2 = Globe 3 = Swing Check
Example above, namely DPV Fig. 1512F
Shell Material 1 2 3 3L 4 4L 5 6 7 9 B C
= WC1 = WCB = CF8M = CF3M = CF8 = CF3 = C5 = WC6 = CN7M = WC9 = LCB = LCC
F End Connections F = Flanged Ends B = Butt-Weld Ends T = Threaded X = Per Customer's Request
ANSI Class 150 Gate Valve, Outside Screw and Yoke, Rising Stem Design, in Cast Carbon Steel ASTM A216 Grade WCB Shell Material with Flanged Ends
N.B. DPV® is an internationally registered trademark of D.P.S.I., New York, USA. All other names and/or trademarks referenced in the catalog are the properties of their respective owners.
29
DELTA PACIFIC VALVE MFG CO
API 600 CAST STEEL VALVES STANDARD TERMS AND CONDITIONS OF SALE CONTROLLING PROVISIONS AND ACCEPTANCE All DPV sales are expressly subject to these terms and conditions, which govern and prevail regardless of any terms and conditions set forth to the contrary by the Buyer. The Buyer's acceptance of these terms and conditions is evidenced by the Buyer's placement of order with DPV.
QUOTATIONS AND PRICES All goods are priced F.O.B. our warehouse. Inland freight to destination is for account of the Buyer, either on collect basis, or prepaid and then billed by DPV for payment by the Buyer. Unless otherwise stated in writing, all prices are valid for thirty (30) days only. Published prices are subject to changes without prior notice.
DELIVERY Delivery quoted is estimated based on availability of DPV's stock and/or production schedule at time of quotation/order, and is subject to changes in the event of prior sales and re-scheduling to any occurences beyond the DPV 's control, though DPV, as a gesture of goodwill, will do its best stay as close as possible to the delivery estimated. Title to the product(s) and risk of loss shall pass to the Buyer upon delivery to a common carrier or Buyer's transport. All claims of loss to the materials in transit shall be filed by the Buyer directly with the carrier. All claims for shortages, corrections or deductions must be made to DPV within ten (10) days after receipt of goods.
CANCELLATION AND RETURN All cancellations and returns, etc., cannot be made without DPV's formal prior consent with a Return Authorization Number (RAN). A cancellation and re-stocking charge will apply in accordance with DPV's Return Policy, which applies to all returns. Special items are not subject to cancellation or returns.
FORCE MAJEURE DPV is not to be held responsible for any delays in delivery, or defaults in completing an order or contract, due to force majeure such as strikes, work stoppages, fires, floods, accidents, inability to obtain fuel and transportation means, vendors' delayed deliveries or materials, parts, components, goods, etc., to DPV, acts of God, and/or any other causes beyond Seller's control.
TAXES All DPV prices are exclusive of all taxes, which, if applicable under government laws, shall be wholly for the Buyer's account and to be fully paid by the Buyer only. Where the Buyer is lawfully entitled to exemption from any tax, all necessary documentation must be provided by the Buyer to DPV to effect such exemption. Any taxes interests and penalties assessed against DPV on transactions which are otherwise determined as taxable, shall be borne by the Buyer. The term "Taxes" used here shall include any impost, duty, levy or other charges imposed by any government or agency thereof upon the property, services or parties hereto, but shall not included those measured by the net income of DPV.
ERRORS All clerical and computational errors and/or omissions are exempted and are to be corrected by DPV.
LIMITED WARRANTY All DPV products are guaranteed to the original Buyer only for a one (1) year period from and after the invoice date against defects in material and workmanship under normal and proper use and service, and not caused or resulting from improper usage or application, improper installation, improper maintenace and repairs, modifications or alterations, normal wear and tears, corrosion, erosion, or chemical attacks. DPV's obligation under this warranty is limited strictly to repairing or replacing, at it's election, any parts or products determined by DPV to be defective, or refunding the purchasing price to the original Buyer. DPV shall bear normal surface transportation cost for shipping the replacements, but shall not bear any losses, damages, installation, re-installation, enginering, or any other costs incurred thereof by the Buyer. The Uniform Commercial Code (UCC) shall not apply to the sale, nor the Michigan statutes adopting the UCC. This warranty is expressly made in lieu of and excludes all other warranties, guarantees, or representations expressed or implied. There are no implied warranties of merchantibility or fitness for a particular purpose.
EXCLUSIONS Do not use DPV products in aircraft or aerospace applications. No warranties, guarantees or representations of any kind are made with respect to such applications. The Buyer assumes on their own all risks of any use in such applications and will indemnify and hold harmless DPV against and from any claims, costs (including attorney's fees) and liabilities arising out of such use.
LIABILITY Notwithstanding any provision in the Buyer's order or elsewhere to the contrary, under no circumstances shall DPV be liable for any direct, indirect, special, consequential or incidental damages (including but not limited to loss of revenue, loss of use, material, production or end products), or any other claims for damages arising out of the purchase, delivery, installation or use of DPV products, whether claimed in contract, warranty, tort (including negligence) and delays, actual or imputed, or otherwise.
GOVERNING LAW The contract shall be governed by, construed, and enforced in accordance with the laws of the State of New York in the United States of America. The provisions of the "UN Convention on Contracts for the International Sale of Goods" shall not apply.
PARTIES The abbreviaiton "DPV" referes to Delta Pacific Valve Mfg. Co., and the word "Buyer" refers to the Person, Party or Company purchasing goods and/or services from Delta Pacific Valve Mfg. Co. (DPV).
DELTA PACIFIC VALVE MFG CO
30
OTHER
PRODUCTS
API 6D / BS 5351 Floating Ball Valves Fire Tested & Certified to API 6FA & BS 6755 Pt. 2 1-Pce & 2-Pce Body Design, Full & Reduced Bores ANSI Class 150 & 300, ½" to 12", WCB/LCC/CF8M
API 6D Trunnion Mounted Ball Valves Forged Steel, 3-Piece Bolted Body Design ANSI Cl.150 to 2500, Full & Reduced Bores Available in A105, LF2 and other Alloys
API 609 Butterfly Valves Category A, Wafer & Lug Body Patterns Concentric Disc & Seat Design, 2-Pce Stem Rated 200 psig CWP, 2" to 12", WCB & CF8M
API 6D / API 594 Wafer Check Valves Dual & Single Plate Designs ANSI Class 150 to 600, 2" to 24" Available in WCB, LCB & CF8M
Industrial Ball Valves - Investment Cast 1-Pce, 2-Pce & 3 Pce Body Designs Full & Reduced Bores, NPT/SW/BW Ends ANSI Class 150 to 800, ½" to 4", WCB & CF8M
Industrial Strainers Y & Basket (Simplex & Duplex) Types ANSI Class 150 to 1500, ¼" to 16" Available in Cast Iron, Bronze, WCB & CF8M
Multi-Function Control Check Valves Y-Pattern Body, Cast & Ductile Iron, 2" to 14" ANSI Class 125, 150 & 300, Flanged Ends
Pump Suction Diffusers Cast Iron & Ductile Iron Materials ANSI Class 125, 150 & 300, Flanged Ends
Corporate Head Office
DELTA PACIFIC VALVE MFG. CO. 400 Oser Avenue #400 Hauppauge, New York 11788-3600 U.S.A. Tel: 1 (631) 231 1261 • Fax: 1 (631) 231 1794 • Email:
[email protected]
England
DELTA PACIFIC MFG. LTD. 10 Victoria Way, Studlands Park Industrial Estate Newmarket CB8 7SH, England, U.K. Tel: 44 (1638) 606 226 • Fax: 44 (1638) 606 227 • Email:
[email protected] Distributed by:
Printed in U.S.A.
Catalog# CSV02
©2002 All rights reserved by Delta Pacific Valve Mfg. Co., U.S.A.