Green Pin Catalogue 2012 - English [PDF]

Introduction

P.O. Box 57, 3360 AB Sliedrecht Industrieweg 6, 3361 HJ Sliedrecht The Netherlands Telephone : +31 184 41 33 00 Fax : +31 184 41 49 59 E-mail : [email protected] Website : www.vanbeest.nl Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. Dirk van Beest founded the Van Beest company in 1922, initially as a supplier of iron works to the dredging industry, which was strongly developed in the Sliedrecht area. From the very beginning, the company has been forging shackles. Its ironwork expertise gave the Van Beest shackle an edge over the competition and this was the start of a network of professional users that now stretches across the globe. In 2007 Van Beest acquired Excel®. Under this brand grade 8 and grade 10 lifting chain accessories are produced in our French factory. The designs and quality standards of our products are the result of requirements put forward over the years by our customers in markets throughout the world. Our shackles are branded Green Pin®, our chain fittings Excel®, we are the sole proprietors of these two brands.

Production At Van Beest we were faced with a labour-intensive production unit. Over the years Van Beest invested, with its own engineers, in the development of production lines of high quality output. The highly automated machines in our two factories are custom built to Van Beest’s requirements and thus to those of our customers. The same technicians demand the quality of the products during production and therefore guarantee quality to our customers. Each individual Green Pin® shackle or Excel® hook is marked with the steel grade and a traceability code. But quality is not only a matter of the product itself, it stretches across the entire organization. Since 1993 our company has been ISO certified by Lloyds; currently we are ISO 9001-2008 certified.

Accessories Our products are used by professionals in many different environments such as the offshore industry, naval construction, the fishing industry, mining, and general industry, to mention just a few. The Green Pin® shackle or Excel® hook is usually the final connection, and to serve our customers best, we have added a wide range of other steel wire rope and chain accessories which complement our full range of high quality products. These accessories are engineered by Van Beest and carefully sourced from certified suppliers to ensure they represent the same high quality performance as our own products.

Distribution Both our Green Pin® shackles and Excel® hooks are inspected and stored at our main warehouse in Sliedrecht, 30 km from Rotterdam, where we offer our wide range of products from stock. Rotterdam is the main seaport to Europe inbound and has sailing connections to all the major business centres across the world outbound. Storage efficiency is optimized by the latest computer software, enabling us to make maximum use of our storage facilities. A customer order can be shipped from our warehouse within 4 hours from placing the order. Additionally, wholesalers throughout the world maintain stocks of our Green Pin® shackles and Excel® hooks in order to serve their own target markets best. In over 80 countries worldwide Green Pin® shackles and Excel® hooks are available from storage at our various distributors. We will be pleased to advise you of the Green Pin® or Excel® supplier nearest to you to obtain supplies. We trust this catalogue will be a helpful business tool for you and that it will assist you in serving your customers’ needs. In addition, our skilled salespeople and technicians are always at your service. Please do not hesitate to contact us for any question related to shackles, hooks or other wire rope and chain accessories in general. We are convinced that with the full range of our products and services you have found an excellent source that enables you to meet your needs in the global marketplace. Kind regards,

C. Boer Managing Director

R.M. Meer Vice President Sales

P.S.: For general business terms and conditions see page 174

Van Beest B.V., manufacturer and supplier of wire rope and chain fitings. Registered trade marks ‘Green Pin’ and ‘Excel’. Member of Van Beest International. Rabobank: account No. 35 93 43 155, IBAN code : NL86RABO0359343155, SWIFT/BIC code : RABONL2U. VAT No. NL0091.33.835.B01. Chamber of Commerce Rotterdam - No. 23009317. All our offers and contracts are subject to our General Conditions of Sale as registered with the District Court in Dordrecht on March 12, 2012 under number AL 5/2012.

Member of Van Beest International

Introduction

Two brands: Green Pin® and Excel® In 2007 Van Beest acquired the Excel factory in France. In this factory we manufacture lifting chain accessories. The Excel® range of chain accessories is very complete; you will find everything you need to make a chain assembly in the program. From the master link to the hook, fitted with an eye, swivel or clevis. And the range not only contains grade 8 products; almost every product can also be supplied in grade 10. Van Beest also offers a range of top quality stainless steel chain accessories. Over the last few years Van Beest further improved the Excel® range and expanded it with new types and sizes. Please check our separate Excel® catalogue for details of this range.

2

Introduction

VAN BEEST B.V., manufacturer and supplier of wire rope and chain fittings. Registered trademarks Green Pin® and Excel®

VAN BEEST B.V. Head Office P.O. Box 57 3360 AB Sliedrecht The Netherlands Industrieweg 6 3361 HJ Sliedrecht The Netherlands Telephone +31 184 41 33 00 Telefax +31 184 41 49 59 E-mail [email protected]

VAN BEEST GmbH & Co. KG

VAN BEEST FRANCE S.A.S.

VAN BEEST USA, L.L.C.

Industriestraße 9 D-59457 Werl Germany

Route de Chanier 63250 Celles sur Durolle France

1357 Sheffield Blvd. Houston, Texas 77015 USA

Telephone +49 2922 97 430 Telefax +49 2922 83 289 E-mail [email protected]

Telephone +33 (0)4 73 51 89 51 Telefax +33 (0)4 73 51 56 15 E-mail [email protected]

Telephone +1 800 489 75 08 Telefax +1 713 674 82 24 E-mail [email protected]

your reliable partner

We reserve the right to make amendments on specifications mentioned in this catalogue without prior notification. Specifications show general compliance with the various standards and should not be taken to meet all terms of the contract or purchase order. Chamber of Commerce Rotterdam, Registration Number 23009317 VAT Number NL 0091.33.835.B01 ©copyright 2012 VAN BEEST B.V., Sliedrecht All Rights Reserved

3

Introduction

Memberships Van Beest is a member of several organizations which promote common interests in our industry. Companies with similar interests come together to share ideas and solutions for industry issues. These organizations spread (technical) information via publications, internet and meetings, and represent the interests of their members on a collective basis. Some of them also organize trade missions, seminars, workshops, member meetings and collective participation in exhibitions worldwide.

Distributors Distributors throughout the world maintain stocks of our Green Pin® shackles and Excel® hooks in order to serve their own target markets best. In over 80 countries worldwide our products are available from stock at our various distributors. We will be pleased to direct you to the supplier nearest to you to obtain supplies. Please contact us at: [email protected]

4

Introduction

References Some companies that have used Green Pin® products in projects: - Acergy - Aker Marine Contractors - Bechtel Corporation - Damen Shipyards Group - Dockwise Ltd. - Heerema Marine Contractors - Hyundai Heavy Industries Co., Ltd. - IHC Merwede - Jumbo Shipping - Keppel Offshore & Marine - Maersk Drilling - McDermott - Petrobras - Saipem - Subsea 7 - Technip

5

Introduction

General In case you do not use the products yourself but are reselling these as a part of a product manufactured by yourself, please take our general cautions and warnings into account and make these known to your customers as well. In any case, we do not accept any responsibility or liability, nor can we be held responsible for any misuse or damage with, by or at your customers due to negligent use.

Definitions Material For the production of shackles and other lifting devices, different raw materials are used, depending on the use of the finished product. For shackles for example, depending on the specific use, the following raw materials can be applied: • mild steel, untreated, comparable to grade 3; • high tensile steel, untreated, or normalized, which is comparable to grade 4; • high tensile steel, quenched and tempered, which is comparable to grade 6; • alloy steel, quenched and tempered, which is comparable to grade 8. Load Following terms are used to define a load: • Working Load Limit or WLL: the maximum load the product is designed to support, in general use and in a straight pull. • Proof Load or PL: this is the load applied on proof testing the product. At this load the product may not show visual deformation. For further specific information as to the proof load applied, we refer to the separate paragraph on testing further on. • Minimum Breaking Load or MBL: the minimum load at which the product may fail or no longer support the load. Where applicable the details on the MBL are given specifically for each product range, at the beginning of each chapter. • Shock Load: a load resulting from a very rapid application of the load on the product. Shock loads are to be avoided in practice since these increases the stress on the product significantly and may affect its product life. The unit that is used in this catalogue to indicate WLL, PL and MBL is t, the metric ton. Safety factor This factor gives the ratio between the Minimum Breaking Load and the Working Load Limit. For the standard range of Green Pin® shackles for example, the safety factor is 6:1, meaning that the shackle may only break once it is over­loaded by a factor of at least 6 (6 times its designed Working Load Limit). Product dimensions All product dimensions in this catalogue are nominal dimensions. Product design, materials and/or specifications can be subject to alterations without prior notification. Finish Products can have following finish: • Self coloured: the product is delivered in the condition it has been forged or machined and has undergone no specific finish treatment. • Electro-galvanized: the product is electro-galvanized according to the customary standards, after the actual production of the product. The thickness of the coating is at least 5 µm. • Hot dipped galvanized: the product is hot dipped galvanized according to the customary standards, after the actual production of the product. The thickness of the coating is at least 70 µm. • Painted: the product is painted in a specific colour after the production. Standard These refer to the specific standards indicated for the product. Temperature range This indicates the temperature range at which the product can be used. Outside the temperature range the WLL of a product may be affected.

6

Depending on the type of product and certificate availability for a certain product, following certificates are used in this catalogue: • works certificate in accordance with EN 10204 - 2.1 or 2.2; • material certificate in accordance with EN 10204 - 3.1; • manufacturer test certificate; • EC Declaration of Conformity in accordance with annex IIA of the machine directive 2006/42/EC and the latest amendments; • DNV Type Approval certificate to DNV 2.7-1; • inspection certificate in accordance with EN 10204 - 3.2; • proof load test certificate; • certificate with the actual breaking load experienced on tested samples; • test report of Magnetic Particle Inspection (M.P.I.) in accordance with EN 10228; • test report of Ultrasonic Inspection (U.S.) in accordance with EN 10228. The first five of the above mentioned certificates can be supplied at no extra charge. For all other certificates, additional costs will be charged. Please refer to the relevant product chapter for further details on certificates. On request we can test under supervision of a classification bureau like LROS, DNV, BV, etc.. Abbreviations The following abbreviations are used in this catalogue: C Carbon steel A Alloy steel R Stainless steel S Self coloured P Painted E Electro-galvanized G Hot dipped galvanized

7

Introduction

Certificates

Introduction

Testing Generally the following proof loads are ap­plied to the load rated products and certificates can be supplied upon request. For further conditions on certificates please consult the general price list. For Green Pin® shackles, the actual proof load depends on the shackle type and dimension and is applied as follows:

working load limit t

0.33 0.5 0.75 1 1.5 2 3.25 3.3 4.75 5 6.5 7 8.5 9.5 12 12.5 13.5 15 17 18 21 25 30 35 40 42.5 55 75 85 120 125 150 175 200 250 300 400 500 600 700 800 900 1000 1250 1500

8

Green Pin® standard shackles polar shackles heavy duty shackles proof load t

Green Pin® super shackles

Green Pin® sling shackles

proof load t

proof load t

0.66 1 1.5 2 3 4 6.5 6.6 9.5 10 13 14 17 19 24

19 25

27 30 34 36 42

36

60

60

50 70 80

80

85 110

110

110 112.5

170 180

170 240

225

225 262.5

300 375 450 600 750 900 1050 1200 1350 1500 1875 2250

187.5 225 300 375 450 532 665 798 931 1064 1197 1330 1663 1995

All Working Load Limits (WLL) indicated in this catalogue or in other Van Beest literature or publications are only applicable to recently supplied, new and unused products, which are used under normal conditions. Should extreme circumstances or shock loading be applicable, this must be taken into account when specifying the products to be used. The Working Load Limit should be applied in a straight pull and overloads should not be applied. Side loads should be avoided, as the products are not designed for this purpose and the application of a side load may significantly decrease product life. The Working Load Limit for the product corresponds to static use. In case of dynamic use (breaking, accelerations, shocks), the effective stress on the product in­creases significantly which can lead to product failure. It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the products are used in severe operating conditions. In accordance with our on-going policy to improve our products, some dimensions or product markings may differ from those stated. The characteristics mentioned in this catalogue or in other Van Beest literature or publications are given merely as an indication. Van Beest reserves the right to make all suitable modifications to any product, even after acceptance of the customer order. In any case, the essential characteristics and performances of the products shall not be negatively affected by such modifications. Any dimension considered to be critical should be verified with our engineering department.

Conversion factors To convert from to multiply by Length mm inch 0.0393701 inch mm 25.4 Mass US tons metric tons 0.9071847 metric tons US tons 1.1023113 metric tons pounds 2204.6226218 pounds metric tons 0.0004536 metric tons kilogram 1000 kilogram metric tons 0.001 metric tons kilo Newton 9.8066500 kilo Newton metric tons 0.1019716 pounds kilogram 0.4535924 kilogram pounds 2.2046226 Torque Newton meter foot pound-force

foot pound-force Newton meter

0.7375621 1.3558180

9

Introduction

General cautions and warnings

10

Introduction

Introduction

1 Shackles

12

1

2 Thimbles

50

2

3 Wire Rope Clips

60

3

4 Sleeves

66

4

5 Sockets

70

5

6 Turnbuckles

80

6

7 Links

94

7

8 Swivels

98

8

9 Hooks

102

9

10 Eye Bolts/Eye Nuts

106

10

11 Loadbinders

110

11

12 Chain

114

12

13 Plate Lifting Clamps

116

13

14 Blocks

122

14

15 General Hardware

132

15

16 Stainless Steel Products

144

16

Shackles

Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications. Safety bolt shackles are used for long-term or permanent applications or where the load may slide on the pin causing rotation of the pin. Chain or dee shackles are mainly used on one-leg systems whereas anchor or bow shackles are mainly used on multi-leg systems.

Range Van Beest offers a wide range of bow and dee shackles, depending on the application on which the shackle is going to be used; the range stretches from Working Load Limit (WLL) 0.33 tons to 1500 tons. Therefore, our customers have a very extensive range to choose the shackle exactly suitable for the application. Most of the shackles are directly available from stock. Furthermore, shackles can be supplied to many standards such as the US Federal Specification RR-C-271, EN 13889, British Standard 3032, DIN 82101, DIN 82016 etc. Polar shackles are for use in extreme climatic conditions with material properties guaranteed up to temperatures of -40oC, and furthermore we offer a wide range of general commercial shackles, which are not suitable for lifting but merely for fixing purposes.

Design

2

All Van Beest shackles have a specific design for a specific application. Examples are the “Super” shackles which are made out of grade 8 steel enabling the dimensions of the shackles to be minimized for use in limited space conditions, without loss of functionality or Working Load Limit. Or sling shackles for use with large slings, to provide a better radius to the sling being used. Another example of functional design is the use of shackles where the pin has a square sunken hole so as not to obstruct the use of fishing nets. These are all examples of a highly functional design, to optimize the use of the Van Beest shackles in daily use.

3

Furthermore, shackles used for lifting applications are stamped with the following marks, to specify the quality and safety of use of the shackles:

1

-

4 5

n n n n n

i.e. i.e. i.e. i.e. i.e.

WLL 25 T GP, indicating Green Pin or Bs, indicating Van Beest HA pertaining to a particular batch 4, 6, 8 CE, Conformité Européen

Van Beest Green Pin® shackles meet all relevant requirements of the Machinery Directive 2006/42/EC and all latest amendments.

6

CAD drawings

7

Green Pin® shackles are used in a wide variety of applications; from a simple lift to move an item from A to B in a workplace, to very complex lifting systems for offshore applications. In the latter case, engineers use computer programs like AutoCAD to develop a 2D or 3D specification of the entire system.

8

For standard products usually a CAD drawing library is used. The use of these kind of libraries saves considerable design time and costs. And of course it prevents mistakes that may occur whilst copying data from a product catalogue into the design program.

9

To help the engineers, Van Beest have made their shackle drawings available in various formats. These drawings can be integrated in almost every design program. Currently there are drawings available for Green Pin® Standard, Polar, Super, Sling and Heavy Duty shackles. Product designs are available in various formats, like: DWG, IGES, PDF, SAT and STEP.

10 11

The drawings can be downloaded from our server. Please contact our sales department to receive the download instructions.

12

Finish

13

Shackles supplied by Van Beest can be either hot dipped galvanized, electro-galvanized, painted or self coloured, depending on the type of shackle and its application.

14

You can find the finish of each type of shackle in the product section further on.

15 16

Working Load Limit manufacturer’s identification symbol traceability code steel grade CE conformity code

12

Upon request at time of order, all load rated shackles can be supplied with any of the following documents or certificates: -

works certificate in accordance with EN 10204 - 2.1 or 2.2; material certificate in accordance with EN 10204 - 3.1; manufacturer test certificate; EC Declaration of Conformity in accordance with annex IIA of the machine directive 2006/42/EC;

-

inspection certificate in accordance with EN 10204 - 3.2; proof load test certificate; certificate with the actual breaking load experienced on tested samples; test report of Magnetic Particle Inspection (M.P.I.); test report of Ultrasonic Inspection (U.S.).

Shackles

Certification

The first four of the above mentioned certificates can be supplied at no extra charge. For all other certificates, additional costs will be charged. The test certificates can be supplied surveyed by all official classification societies, such as Lloyd’s, Det Norske Veritas, British Standards Bureau, American Bureau of Shipping, Germanischer Lloyd’s or any other officially certified inspection body. Green Pin® Standard Shackles and Green Pin® Polar Shackles are DNV type approved to certification Note 2.7-1, lifting sets for offshore containers.

Instructions for use

1 2

Shackles should be inspected before use to ensure that: • all markings are legible; • the body and pin are both identifiable as being of the same size, type and make; • the threads of the pin and the body are undamaged; • never use a safety bolt type shackle without using a securing pin; • the body and the pin are not distorted or unduly worn; • the body and pin are free from nicks, gouges, cracks and corrosion; • shackles may not be heat treated as this may affect their Working Load Limit; • never modify, repair or reshape a shackle by welding, heating or bending as this will affect the Working Load Limit.

Assembly Ensure that the pin is correctly screwed into the shackle eye, i.e. tighten hand-tight, then secure using a wrench or other suitable tool so that the collar of the pin is fully seated on the shackle eye. Ensure that the pin is of the correct length so that it penetrates the full depth of the screwed eye and allows the collar of the pin to seat on the surface of the shackle eye. Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the pin holes. Do not use the shackle under these circumstances. Never replace a shackle pin except with one of the same size, type and make as it may not be suitable for the loads imposed. Select the correct type of shackle and its Working Load Limit for the particular application. Should extreme circumstances or shock loading be applicable, this must be well taken into account on selecting the correct shackle. Please note that commercial shackles are not to be used for lifting applications. Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body centreline, avoid introduction of bending loads, unstable loads and do not apply overloads.

3 4 5 6 7 8 9 10 11 12 13 14 15

13

16

Shackles

Side loads Side loads should be avoided as well, as the products are not designed for this purpose. If side loads cannot be avoided, the following reduction factors must be taken into account: Reduction for side loading Load angle New Working Load Limit 0 ° 100% of original Working Load Limit 45 °   70% of original Working Load Limit 90 °   50% of original Working Load Limit

In-line loading is considered to be a load perpendicular to the pin and in the plane of the bow. Load angles in the table are the deviating angles from the in line loads. When using shackles in connection with multi-leg slings, due consideration should be given to the effect of the angle between the legs of the sling. As the angle increases, so does the load in the sling leg and consequently in any shackle attached to that leg.

1 2 3 4 5

When a shackle is used to connect two slings to the hook of a lifting device, a bow type shackle must be assembled with the slings in the shackle body and the hook engaged with the shackle pin. The angle between the slings should not exceed 120°. If symmetrically loaded the shackle may be used to the full WLL.

6

To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin. Do not reduce the width between the shackle jaws by welding washers or spacers to the inside faces of the eyes or by closing the jaws, as this will affect the properties of the shackle.

7 8 9 10 11 12 13

RIGHT

14 15 16

14

WRONG

Avoid applications where due to movement (e.g. of the load or the rope) the shackle pin can rotate and possibly be unscrewed. If such an application is necessary or when the shackle is to be left in place for a prolonged period or where maximum pin security is required, use a shackle with a safety bolt, nut and pin cotter pin.

Shackles should not be immersed in acidic solutions or exposed to acid fumes or other chemicals that are potentially harmful for the shackle. Please be aware that these types of chemicals are used in certain production processes.

Point loading Most of the time the load bearing component that is in connection with a shackle is of a rounded shape. Point loading of shackles is allowed but the minimum diameter of a rounded component should be equal or bigger than the bow size of the shackle being used. Bigger diameters and/or flat parts (at shackle pin side) to increase contact area can be beneficial. Sharp edges should be avoided.

1 2 3 4

Temperature

5

If extreme temperature situations are applicable, the following load reduction must be taken into account: Temperature up to 200°C 200 - 300°C 300 - 400°C > 400°C

Shackles

When a shackle is used to secure the top block of a set of wire rope blocks the load on this shackle is increased by the value of the hoisting effect.

Reduction for elevated temperatures New Working Load Limit 100% of original Working Load Limit 90% of original Working Load Limit 75% of original Working Load Limit not allowed

6 7

The rating of shackles to EN 13889 assumes the absence of exceptionally hazardous conditions. Exceptionally hazardous conditions include offshore activities, the lifting of persons and the lifting of potentially dangerous loads such as molten metals, corrosive materials or fissile materials. In such cases a competent person should assess the degree of hazard and the safe working load should be reduced accordingly from the Working Load Limit.

Inspection

8 9 10

It is required that the shackles are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the shackles are used in severe operating conditions.

11 12 13 14 15

15

16

Shackles

Green Pin® Standard Shackles bow shackles with screw collar pin

G-4161

• Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 2 t can be supplied with DNV 2.7-1 certificate. working load limit t

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

1 2 3 4 5

diameter pin

diameter eye

width eye

width inside

length inside

width bow

length

length bolt

width

weight each

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

kg

5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65

 6  8 10 11 13 16 19 22 25 28 32 35 38 42 50 57 65 70

12 16.5 20 22.5 26.5 34 40 46 52 59 66 72 80 88 103 111 130 145

 5  7  9 10 11 13 16 19 22 25 28 32 35 38 45 50 57 65

9.5 12 13.5 17 19 22 27 31 36 43 47 51 57 60 74 83 95 105

22 29 32 36.5 43 51 64 76 83 95 108 115 133 146 178 197 222 260

 16  20  22  26  29  32  43  51  58  68  75  83  92  99 126 138 160 180

36 48.5 56 63.5 74 89 110 129 144 164 185 201 227 249 300 331 377 433

29.5 38 46.5 54 59.5 73 89 103 119 137 153 170 186 203 243 272 310 344

 26  34  40  46  51  58  75  89 102 118 131 147 162 175 216 238 274 310

0.02 0.05 0.1 0.14 0.19 0.36 0.63 1.01 1.5 2.21 3.16 4.31 5.55 7.43 12.84 18.15 26.29 37.6

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

width bow

length

length bolt

width

weight each

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

lbs

  3/16   1/4   5/16   3/8   7/16   1/2   5/8   3/4   7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2

  1/4   5/16   3/8   7/16   1/2   5/8   3/4   7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 9/16 2 3/4

  1/2  21 /32 25 /32 7 /8  1 1 /32 1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4  1/16 4  3/8 5  1/8 5 23/32

/16 9 /32 11 /32 13 /32 7 /16 1 /2 5 /8 3 /4 7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32 1 31/32 2  1/4 2  9/16

/8 15 /32 17 /32 21 /32 3 /4    7 /8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32 3  9/32 3  3/4 4  1/8

/8  1  5/32  1  1/4  1  7/16  1 11/16  2  2 17/32  3  3  9/32  3  3/4  4  1/4  4 17/32  5  1/4  5  3/4  7  7  3/4  8  3/4 10  1/4

/8 25 /32 7 /8  1 1 /32 1  5/32 1  1/4 1 11/16 2 2  9/32 2 11/16 2 15/16 3  9/32 3  5/8 3 29/32 4 31/32 5  7/16 6  5/16 7  3/32

 1 13/32  1 29/32  2  7/32  2  1/2  2 29/32  3  1/2  4 11/32  5  3/32  5 21/32  6 15/32  7  9/32  7 29/32  8 15/16  9 13/16 11 13/16 13  1/32 14 27/32 17  1/16

 1  5/32  1  1/2  1 27/32  2  1/8  2 11/32  2  7/8  3  1/2  4  1/16  4 11/16  5 13/32  6  1/32  6 11/16  7  5/16  8  9  9/16 10 23/32 12  7/32 13 17/32

 1  1/32  1 11/32  1  9/16  1 13/16  2  2  9/32  2 15/16  3  1/2  4  1/32  4 21/32  5   5/32  5 25/32  6  3/8  6  7/8  8  1/2  9  3/8 10 25/32 12  7/32

 0.05  0.11  0.22 0.3  0.42  0.79  1.38  2.22  3.31  4.86  6.97  9.49 12.24 16.37 28.31 40.01 57.96 82.89

In inch working load limit

6

t

7

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

8 9 10 11 12 13 14 15 16

diameter bow

16

3

3

7

5

bow shackles with safety bolt

• • • • • • G-4163

Material Safety Factor Standard

: bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade A Finish : hot dipped galvanized Temperature Range : -20°C up to +200°C Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 2 t can be supplied with DNV 2.7-1 certificate.

working load limit

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

f mm

g mm

h mm

i mm

j mm

k mm

kg

29 32 36.5 43 51 64 76 83 95 108 115 133 146 178 197 222 260 329

 20  22  26  29  32  43  51  58  68  75  83  92  99 126 138 160 180 190

48.5 56 63.5 74 89 110 129 144 164 185 201 227 249 300 331 377 433 527

 42  50  60  67  82  98 114 130 150 166 178 197 202 249 269 301 330 380

 34  40  46  51  58  75  89 102 118 131 147 162 175 216 238 274 310 340

 4  5  8 11 13 17 19 22 25 27 30 33 19 23 26 29 32 39

0.06 0.11 0.16 0.22 0.42 0.74 1.18 1.77 2.58 3.66 4.91 6.54 8.19 14.22 19.85 28.33 39.59 62

t

a mm

b mm

c mm

d mm

e mm

0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 85

7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65 75

 8 10 11 13 16 19 22 25 28 32 35 38 42 50 57 65 70 83

16.5 20 22.5 26.5 34 40 46 52 59 66 72 80 88 103 111 130 145 162

 7  9 10 11 13 16 19 22 25 28 32 35 38 45 50 57 65 73

12 13.5 17 19 22 27 31 36 43 47 51 57 60 74 83 95 105 127

weight each

t

0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 85

1 2 3 4 5

In inch working load limit

Shackles

Green Pin® Standard Shackles

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

lbs

/4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8

5

/16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8

/32 25 /32 7 /8 1  1/32 1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4 1/16 4  3/8 5  1/8 5 23/32 6  3/8

/32 11 /32 13 /32 7 /16 1 /2 5 /8 3 /4 7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32 1 31/32 2  1/4 2  9/16 2  7/8

/32 17 /32 21 /32 3 /4 7 /8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32 3  9/32 3  3/4 4  1/8 5

 1  5/32  1  1/4  1  7/16  1 11/16  2  2 17/32  3  3  9/32  3  3/4  4  1/4  4 17/32  5  1/4  5  3/4  7  7  3/4   8  3/4 10  1/4 12 15/16

/32 7 /8 1  1/32 1  5/32 1  1/4 1 11/16 2 2  9/32 2 11/16 2 15/16 3  9/32 3  5/8 3 29/32 4 31/32 5  7/16 6  5/16 7  3/32 7 15/32

 1 29/32  2  7/32  2  1/2  2 29/32  3  1/2  4 11/32  5  3/32  5 21/32  6 15/32  7  9/32  7 29/32  8 15/16  9 13/16 11 13/16 13  1/32 14 27/32 17  1/16 20  3/4

 1 21/32  1 31/32  2  3/8  2  5/8  3  7/32  3 27/32  4  1/2  5  1/8  5 29/32  6 17/32  7  7  3/4  7 15/16  9 13/16 10 19/32 11 27/32 13 14 31/32

 1 11/32  1  9/16  1 13/16  2  2  9/32  2 15/16  3  1/2  4  1/32  4 21/32  5  5/32  5 25/32  6  3/8  6  7/8  8  1/2  9  3/8 10 23/32 12  7/32 13  3/8

/32 3 /16 5 /16 7 /16 1 /2 21 /32 3 /4 7 /8 31 /32 1  1/16 1  3/16 1  5/16 3 4 / 29 /32 1  1/32 1  5/32 1  1/4 1 17/32

0.13 0.25 0.34 0.48 0.92 1.62 2.59 3.9 5.69 8.06 10.81 14.42 18.06 31.34 43.77 62.46 87.27 136.69

1

1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 3

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 9/16 2 3/4 3 1/4

21

9

15

25

5

6 7 8 9 10 11 12 13 14 15

17

16

Shackles

Green Pin® Standard Shackles dee shackles with screw collar pin

G-4151

• • • • • •

Material Safety Factor Standard

: bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 2, Grade A Finish : hot dipped galvanized Temperature Range : -20 °C up to +200 °C Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 2 t can be supplied with DNV 2.7-1 certificate. working load limit

1 2 3 4 5

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

kg

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

 5  7  9 10 11   13.5 16 19 22 25 28 32 35 38 45 50 57 65

 6  8 10 11 13 16 19 22 25 28 32 35 38 42 50 57 65 70

12   16.5 20   22.5   26.5  34  40  46  52  59  66  72  80  88 103 111 130 145

 5  7  9 10 11 13 16 19 22 25 28 32 35 38 45 50 57 65

 19  22  26  32  37  43  51  59  73  85  90  94 115 127 149 171 190 203

33 41.5 50 59 68 81 97 112 134 154 167 180 209 230 271 305 345 376

29.5 38 46.5 54 59.5 73 89 103 119 137 153 170 186 203 243 272 310 344

 0.02  0.05  0.09  0.14  0.19  0.32  0.54  0.87  1.34  2.08  2.77  3.72  5.14  6.85 11.45 16.86 24.61 32.65

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

weight each

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

lbs

3

/16 1 /4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8

1

1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 9/16 2 3/4

/32 21 /32 25 /32 7 /8 1  1/32 1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4  1/16 4  3/8 5  1/8 5 23/32

/16 9 /32 11 /32 13 /32 7 /16 1 /2 5 /8 3 /4 7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32 1 31/32 2  1/4 2  9/16

/8 15 /32 17 /32 21 /32 3 /4 7 /8 1 1/16 1 7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32 3  9/32 3  3/4 4  1/8

/4 7 /8 1  1/32 1  1/4 1 15/32 1 11/16 2 2  5/16 2  7/8 3 11/32 3 17/32 3 11/16 4 17/32 5 5  7/8 6 23/32 7 15/32 8

 1  5/16  1  5/8  1 31/32  2  5/16  2 11/16  3  3/16  3 13/16  4 12/32  5  9/32  6  1/16  6  9/16  7  3/32  8  7/32  9  1/16 10 21/32 12 13 19/32 14 13/16

 1  5/32  1  1/2  1 27/32  2  1/8  2 11/32  2  7/8  3  1/2  4  1/16  4 11/16  5 13/32  6  1/32  6 11/16  7  5/16  8  9  9/16 10 23/32 12  7/32 13 17/32

0.04 0.11 0.2 0.3 0.42 0.7 1.19 1.92 2.95 4.59 6.1 8.2 11.33 15.1 25.23 37.17 54.26 71.98

9.5 12   13.5  17  19  22  27  31  36  43  47  51  57  60  74  83  95 105

weight each

In inch working load limit

6 7

t

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

8 9 10 11 12 13 14 15 16

diameter bow

18

/4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8

15

3

3

3

dee shackles with safety bolt

G-4153

• • • • • •

Material Safety Factor Standard

: bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 3, Grade A Finish : hot dipped galvanized Temperature Range : -20 °C up to +200 °C Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 2 t can be supplied with DNV 2.7-1 certificate. working load limit

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

thickness nut

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

kg

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 85

13.5 16 19 22 25 28 32 35 38 45 50 57 65 75

16 19 22 25 28 32 35 38 42 50 57 65 70 83

 34  40  46  52  59  66  72  80  88 103 111 130 145 162

13 16 19 22 25 28 32 35 38 45 50 57 65 73

 22  27  31  36  43  47  51  57  60  74  83  95 105 127

 43  51  59  73  85  90  94 115 127 149 171 190 203 229

 81  97 112 134 154 167 180 209 230 271 305 345 376 427

 82  98 114 130 150 166 178 197 202 249 269 301 330 380

13 17 19 22 25 27 30 33 19 23 26 29 32 39

0.39 0.67 1.08 1.66 2.46 3.4 4.51 6.1 7.63 13.25 18.53 25.94 35.33 52.97

Shackles

Green Pin® Standard Shackles

weight each

1 2 3 4 5

In inch working load limit t

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 85

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

thickness nut

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

/8 3 /4 7 /8

1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4  1/16 4  3/8 5  1/8 5 23/32 6  3/8

/2 5 /8 3 /4 7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32 1 31/32 2  1/4 2  9/16 2  7/8

/8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32 3  9/32 3  3/4 4  1/8 5

1 11/16 2 2  5/16 2  7/8 3 11/32 3 17/32 3 11/16 4 17/32 5 5  7/8 6 23/32 7 15/32 8 9  1/32

 3  3/16  3 13/16  4 13/32  5  9/32  6  1/16  6  9/16  7  3/32  8  7/32  9  1/16 10 21/32 12 13 19/32 14 13/16 16 13/16

 3  7/32  3 27/32  4  1/2  5  1/8  5 29/32  6 17/32  7  7  3/4  7 15/16  9 13/16 10 19/32 11 27/32 13 14 31/32

/2 5 /8 3 /4 7 /8 1

5

1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 3

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 9/16 2 3/4 3 1/4

1

7

weight each

6

i inch

lbs

/2 21 /32 3 4 / 7 /8 31 /32 1  1/16 1  3/16 1  5/16 3 /4 29 /32 1  1/32 1  5/32 1  1/4 1 17/32

0.85 1.48 2.39 3.66 5.42 7.5 9.95 13.45 16.82 29.21 40.86 57.19 77.89 116.77

7

1

8 9 10 11 12 13 14 15

19

16

Shackles

Green Pin® Heavy Duty Shackles bow shackles with safety bolt

• • • •

P-6036

1 2

Material Safety Factor Finish Certification

working load limit

: : : :

bow and pin alloy steel, Grade 8 quenched and tempered MBL equals 5 x WLL shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized) at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping Certificate on proof load

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

k mm

kg

 120  150  200  250  300  400  500  600  700  800  900 1000 1250 1500

 95 105 120 130 140 170 180 200 210 210 220 240 260 280

 95 108 130 140 150 175 185 205 215 220 230 240 270 290

208 238 279 299 325 376 398 444 454 464 485 515 585 625

 91 102 113 118 123 164 164 189 204 204 215 215 230 230

147 169 179 205 205 231 256 282 308 308 328 349 369 369

400 410 513 554 618 668 718 718 718 718 718 718 768 818

238 275 290 305 305 325 350 375 400 400 420 420 450 450

 647  688  838  904  996 1114 1190 1243 1263 1270 1296 1336 1456 1556

 440  490  520  560  575  690  720  810  870  870  920  940 1025 1025

 428  485  530  565  585  665  710  775  820  820  860  900  970 1010

50 60 60 65 70 70 70 70 70 70 70 70 70 70

 110  160  235  285  340  560  685  880  980 1100 1280 1460 1990 2400

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

3 4 5

In inch working load limit

6 7 8 9 10 11 12 13 14 15 16

20

diameter diameter diameter bow pin eye

t

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

lbs

  120  150  200  250  300  400  500  600  700  800  900 1000 1250 1500

 3  3/4  4  1/8  4 23/32  5  1/8  5  1/2  6 11/16  7  3/32  7  7/8  8  9/32  8  9/32  8 21/32  9  7/16 10  1/4 11  1/32

 3  3/4  4  1/4  5  1/8  5  1/2  5 29/32  6  7/8  7  9/32  8  1/16  8 15/32  8 21/32  9  1/16  9  7/16 10  5/8 11 13/32

 8  3/16  9  3/8 10 31/32 11 25/32 12 25/32 14 13/16 15 21/32 17 15/32 17  7/8 18  9/32 19  3/32 20  9/32 23  1/32 24 19/32

3 19/32 4  1/32 4  7/16 4 21/32 4 27/32 6 15/32 6 15/32 7  7/16 8  1/32 8  1/32 8 15/32 8 15/32 9  1/16 9  1/16

 5 25/32  6 21/32  7  1/16  8  1/16  8  1/16  9  3/32 10  3/32 11  3/32 12  1/8 12  1/8 12 29/32 13  3/4 14 17/32 14 17/32

15  3/4 16  5/32 20  3/16 21 13/16 24 11/32 26  5/16 28  9/32 28  9/32 28  9/32 28  9/32 28  9/32 28  9/32 30  1/4 32  7/32

 9  3/8 10 13/16 11 13/32 12 12 12 25/32 13 25/32 14  3/4 15  3/4 15  3/4 16 17/32 16 17/32 17 23/32 17 23/32

25 15/32 27  3/32 33 35 19/32 39  7/32 43 27/32 46 27/32 48 15/16 49 23/32 50 51  1/32 52 19/32 57  5/16 61  1/4

17  5/16 19  9/32 20 15/32 22  1/16 22  5/8 27  5/32 28 11/32 31  7/8 34  1/4 34  1/4 36  7/32 37 40 11/32 40 11/32

16 27/32 19  3/32 20  7/8 22  1/4 23  1/32 26  3/16 27 15/16 30  1/2 32  9/32 32  9/32 33 27/32 35  7/16 38  3/16 39  3/4

1 31/32 2  3/8 2  3/8 2  9/16 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4

 243  353  518  628  750 1235 1510 1940 2161 2425 2822 3219 4387 5291

dee shackles with safety bolt

• • • •

Material Safety Factor Finish Certification

: : : :

bow and pin alloy steel, Grade 8, quenched and tempered MBL equals 5 x WLL hot dipped galvanized at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity

Shackles

Green Pin® Heavy Duty Shackles

G-6038 working load limit

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

thickness nut

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

kg

120

95

95

208

95

147

274

521

440

50

110

1 2 3 4 5

In inch working load limit

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

thickness nut

weight each

t

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

inch

lbs

120

3 3/4

3 3/4

8 3/16

3 3/4

5 25/32

10 25/32

20 1/2

17 5/16

1 31/32

243

6 7 8 9 10 11 12 13 14 15

21

16

Shackles

Green Pin® Sling Shackles bow shackles with safety bolt

• • • • •

Material : Safety Factor : Finish : Temperature Range : Certification :

P-6033

1 2 3 4 5

bow and pin alloy steel, Grade 8, quenched and tempered MBL equals 5 x WLL shackle bow painted silver, pin painted green -20 °C up to +200 °C at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate, EC declaration of Conformity and all shackles from 75 t are supplied with a Lloyd’s Register of Shipping Certificate on proof load. An MPI and/or US inspection certificate can be supplied on request

working diameter diameter diameter load body pin eye limit a b c t mm mm mm

width eye

width inside

length inside

width bow

length

length bolt

width

d mm

e mm

f mm

g mm

h mm

i mm

j mm

k mm

l mm

kg

  18   30   40   55   75  125  150  200  250  300  400  500  600  700  800  900 1000 1250 1500

 30  35  45  55  54  85  89 100 110 122 145 160 170 190 200 220 240 260 280

 52  69  84  90 110 137 147 158 179 195 231 263 289 315 342 368 399 452 483

147 165 199 240 290 366 391 481 542 601 576 681 741 751 851 851 851 931 950

102 126 140 160 185 220 253 280 300 350 370 450 490 540 554 580 614 650 680

 239  279  331  389  473  583  645  759  859  947  985 1131 1234 1284 1426 1488 1532 1666 1710

 165  207  252  294  327  426  435  470  519  575  675  748  809  879  942 1023 1103 1227 1300

 180  200  235  270  317  390  434  482  530  620  690  790  865  901  947 1023 1107 1182 1253

 29  34  38  45  54  64  50  50  60  70  80  90 100 100 110 120 120 150 150

 64  79  97 100 120 150 170 205 240 265 320 339 370 400 420 440 460 530 560

  7   13   21   30   48   92  140  205  264  360  580  780  980 1360 1430 1650 2120 3700 4000

width eye

width inside

length inside

width bow

length

length bolt

width

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

l inch

lbs

 1  3/16  1  3/8  1 25/32  2  5/32  2  1/8  3 11/32  3  1/2  3 15/16  4 11/32  4 13/16  5 23/32  6  5/16  6 11/16  7 15/32  7  7/8  8 21/32  9  7/16 10  1/4 11  1/32

 2  1/16  2 23/32  3  5/16  3 17/32  4 11/32  5 13/32  5 25/32  6  7/32  7  1/16  7 11/16  9  3/32 10 11/32 11  3/8 12 13/32 13 15/32 14  1/2 15 23/32 17 25/32 19  1/32

 5 25/32  6  1/2  7 27/32  9  7/16 11 13/32 14 13/32 15 13/32 18 15/16 21 11/32 23 21/32 22 11/16 26 13/16 29  3/16 29  9/16 33  1/2 33  1/2 33  1/2 36 21/32 37 13/32

 4  1/32  4 31/32  5  1/2  6  5/16  7  9/32  8 21/32  9 31/32 11  1/32 11 13/16 13 25/32 14  9/16 17 23/32 19  9/32 21  1/4 21 13/16 22 27/32 24  3/16 25 19/32 26 25/32

 9 13/32 10 31/32 13  1/32 15  5/16 18  5/8 22 15/16 25 13/32 29  7/8 33 13/16 37  9/32 38 25/32 44 17/32 48 19/32 50  9/16 56  5/32 58 19/32 60  5/16 65 19/32 67  5/16

 6  1/2  8  5/32  9 29/32 11  9/16 12   7/8 16 25/32 17  1/8 18  1/2 20  7/16 22  5/8 26  9/16 29  7/16 31 27/32 34 19/32 37  3/32 40  9/32 43  7/16 48  5/16 51  3/16

 7  3/32  7  7/8  9  1/4 10  5/8 12 15/32 15 11/32 17  3/32 18 31/32 20  7/8 24 13/32 27  5/32 31  3/32 34  1/16 35 15/32 37  9/32 40  9/32 43 19/32 46 17/32 49 11/32

1  5/32 1 11/32 1  1/2 1 25/32 2  1/8 2 17/32 1 31/32 1 31/32 2  3/8 2  3/4 3  5/32 3 17/32 3 15/16 3 15/16 4 11/32 4 23/32 4 23/32 5 29/32 5 29/32

 2 17/32  3  1/8  3 13/16  3 15/16  4 23/32  5 29/32  6 11/16  8  1/16  9  7/16 10  7/16 12 19/32 13 11/32 14  9/16 15  3/4 16 17/32 17  5/16 18  1/8 20  7/8 22  1/16

  18   29   46   66  106  203  309  452  582  794 1279 1720 2161 2998 3153 3638 4674 8157 8818

35  40  55  60  68  85  94 110 126 135 160 170 190 200 218 242 260 285 285

 35  42  51  57  70  80  95 105 120 134 160 180 200 215 230 255 270 300 320

 69  90 109 115 125 154 179 199 227 245 293 328 348 392 420 466 490 510 550

thickness bearing nut surface

weight each

In inch

6

working diameter diameter diameter load body pin eye limit a b c t inch inch inch

7

  18   30   40   55   75  125  150  200  250  300  400  500  600  700  800  900 1000 1250 1500

8 9 10 11 12 13 14 15 16

22

 1  3/8  1  9/16  2  5/32  2  3/8  2 11/16  3 11/32  3 11/16  4 11/32  4 31/32  5  5/16  6  5/16  6 11/16  7 15/32  7  7/8  8 19/32  9 17/32 10  1/4 11  7/32 11  7/32

 1  3/8  1 21/32  2  2  1/4  2  3/4  3  5/32  3  3/4  4  1/8  4 23/32  5  9/32  6  5/16  7  3/32  7  7/8  8 15/32  9  1/16 10  1/32 10  5/8 11 13/16 12 19/32

 2 23/32  3 17/32  4  9/32  4 17/32  4 29/32  6  1/16  7  1/16  7 27/32  8 15/16  9 21/32 11 17/32 12 29/32 13 11/16 15  7/16 16 17/32 18 11/32 19  9/32 20  3/32 21 21/32

thickness bearing nut surface

weight each

bow shackles with safety bolt

• • • • • • G-5263

Material : bow and pin alloy steel, Grade 8, quenched and tempered Safety Factor : MBL equals 5 x WLL Standard : meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B Finish : hot dipped galvanized (175 ton shackle is painted) Temperature Range : -20 °C up to +200 °C Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping Certificate on proof load working load limit

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

Shackles

Green Pin® Super Shackles

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

k mm

kg

3.3 5 7 9.5 12.5 15 18 21 30 40 55 85 120 150* 175*

13.5 16 19 22 25 28 32 35 38 45 57 70 83 95 105

 16  19  22  25  28  32  35  38  42  50  57  70  83  95 108

 34  40  46  52  59  66  72  80  88 103 117 143 162 208 238

 13  16  19  22  25  28  32  35  38  45  57  70  83  91 102

 22  27  31  36  43  47  51  57  60  74  83 105 127 147 169

 51  64  76  83  95 108 115 133 146 178 197 260 329 400 410

 32  43  51  58  68  75  83  92  99 126 138 180 190 238 275

 89 110 129 144 164 185 201 227 249 300 341 437 535 647 688

 82  98 114 130 150 166 178 197 202 249 286 344 403 511 561

 58  75  89 102 118 131 147 162 175 216 252 320 356 428 485

13 17 19 22 25 27 30 33 19 23 26 32 40 50 60

0.44 0.79 1.26 1.88 2.78 3.87 5.26 6.94 8.79 15 22 42 70 112 160

* = round headed bolt

1 2 3 4 5

In inch working load limit t

3.3 5 7 9.5 12.5 15 18 21 30 40 55 85 120 150* 175*

diameter diameter diameter bow pin eye a inch

/2 /8 3 /4 7 /8 1 5

1 1  1/8 1  1/4 1  3/8 1  1/2 1  3/4 2 2  1/2 3 3  3/4 4

b inch

/8 /4 7 /8 5 3

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 3/4 3 1/4 3 3/4 4 1/4

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

lbs

1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4  1/16 4 19/32 5  5/8 6  3/8 8  3/16 9  3/8

/2 /8 3 /4 7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32 2  1/4 2  3/4 3  9/32 3 19/32 4  1/32

 2  2 17/32  3  3  9/32  3  3/4  4  1/4  4 17/32  5  1/4  5  3/4  7  7  3/4 10  1/4 12 15/16 15  3/4 16  5/32

 1  1/4  1 11/16  2  2  9/32  2 11/16  2 15/16  3  9/32  3  5/8  3 29/32  4 31/32  5  7/16  7  3/32  7 15/32  9  3/8 10 13/16

 3  1/2  4 11/32  5  3/32  5 21/32  6 15/32  7  9/32  7 29/32  8 15/16  9 13/16 11 13/16 13  7/16 17  7/32 21  1/16 25 15/32 27  3/32

 3  7/32  3 27/32  4  1/2  5  1/8  5 29/32  6 17/32  7  7  3/4  7 15/16  9 13/16 11  1/4 13 17/32 15  7/8 20  1/8 22  3/32

 2  9/32  2 15/16  3  1/2  4  1/32  4 21/32  5  5/32  5 25/32  6  3/8  6  7/8  8  1/2  9 29/32 12 19/32 14  1/32 16 27/32 19  3/32

1 5

7 /8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32 3  9/32 4  1/8 5 5 25/32 6 21/32

/

1

2 21 32 3 4 7 8 31 32  1 16  3 16  5 16

/

/ /

/ 1 / 1 / 1 / 3 /4 29 /32 1  1/32 1  1/4 1  9/16 1 31/32 2  3/8

0.97 1.74 2.78 4.14 6.13 8.53 11.6 15.3 19.38 33.07 48.50 92.59 154.32 246.92 352.74

* = round headed bolt

6 7 8 9 10 11 12 13 14 15

23

16

Shackles

Green Pin® Polar Shackles bow shackles with safety bolt, for use under extreme climatic conditions

G-5163

• Material : bow and pin alloy steel, Grade 8, quenched and tempered • Safety Factor : MBL equals 8 x WLL • Standard : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B • Finish : hot dipped galvanized • Temperature Range : -40 °C up to +200 °C • Certification : at no extra charges this product can be supplied and/or a works certificate, material certificate, manufacturer test certificate, EC Declaration of Conformity and/or DNV 2.7-1 certificate. • Note : for shackles with WLL 55 and 85 tons the MBL equals 6 x WLL working load limit

1 2 3

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

k mm

kg

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 85

13.5 16 19 22 25 28 32 35 38 45 50 57 65 75

16 19 22 25 28 32 35 38 42 50 57 65 70 83

 34  40  46  52  59  66  72  80  88 103 116 130 145 162

13 16 19 22 25 28 32 35 38 45 50 57 65 73

 22  27  31  36  43  47  51  57  60  74  83  95 105 127

 51  64  76  83  95 108 115 133 146 178 197 222 260 329

 32  43  51  58  68  75  83  92  99 126 138 160 180 190

 89 110 129 144 164 185 201 227 249 300 334 377 433 527

 82  98 114 130 150 166 178 197 202 249 269 301 330 380

 58  75  89 102 118 131 147 162 175 216 238 274 310 340

13 17 19 22 25 27 30 33 19 23 26 29 32 40

0.42 0.74 1.18 1.77 2.58 3.66 4.91 6.54 8.19 14.22 19.85 28.33 39.59 62

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

4 5

In inch working load limit

6

t

7

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 85

8 9 10 11 12 13 14 15 16

24

diameter diameter diameter bow pin eye a inch

/2 5 /8 3 /4 7 /8

b inch

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

lbs

/8 3 /4 7 /8

1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4  1/16 4  9/16 5  1/8 5 23/32 6  3/8

/2 5 /8 3 /4 7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32 1 31/32 2  1/4 2  9/16 2  7/8

/8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32 3  9/32 3  3/4 4  1/8 5

 2  2 17/32  3  3  9/32  3  3/4  4  1/4  4 17/32  5  1/4  5  3/4  7  7  3/4  8  3/4 10  1/4 12 15/16

1  1/4 1 11/16 2 2  9/32 2 11/16 2 15/16 3  9/32 3  5/8 3 29/32 4 31/32 5  7/16 6  5/16 7  3/32 7 15/32

 3  1/2  4 11/32  5  3/32  5 21/32  6 15/32  7  9/32  7 29/32  8 15/16  9 13/16 11 13/16 13  5/32 14 27/32 17  1/16 20  3/4

 3  7/32  3 27/32  4  1/2  5  1/8  5 29/32  6 17/32  7  7  3/4  7 15/16  9 13/16 10 19/32 11 27/32 13 14 31/32

 2  9/32  2 15/16  3  1/2  4  1/32  4 21/32  5  5/32  5 25/32  6  3/8  6  7/8  8  1/2  9  3/8 10 25/32 12  7/32 13  3/8

/2 21 /32  3 /4  7 /8 31 /32 1  1/16 1  3/16 1  5/16  3 /4 29 /32 1  1/32 1  5/32 1  1/4 1  9/16

0.92 1.62 2.59 3.9 5.69 8.06 10.81 14.42 18.06 31.34 43.77 62.46 87.27 136.69

1

5

1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 3

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 9/16 2 3/4 3 1/4

1

7

 1

Shackles

Green Pin® Heavy Duty Polar Shackles bow shackles with safety bolt, for use under extreme climatic conditions

P-6031

• Material : bow and pin alloy steel, Grade 8, quenched and tempered • Safety Factor : MBL equals 5 x WLL • Finish : shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized) • Temperature Range : -40 °C up to +200 °C • Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity. All shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping Certificate on proof load

working load limit

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

k mm

kg

120 150 200 250 300 400 500 600 700 800 900 1000 1250 1500

 95 105 120 130 140 170 180 200 210 210 220 240 260 280

 95 108 130 140 150 175 185 205 215 220 230 240 270 290

208 238 279 299 325 376 398 444 454 464 485 515 585 625

 91 102 112 118 123 164 164 189 204 204 215 215 230 230

147 169 179 205 205 231 256 282 308 308 328 349 369 369

399 410 512 554 618 668 718 718 718 718 718 718 768 818

238 275 290 305 305 325 350 375 400 400 420 420 450 450

 646  688  837  904  996 1114 1190 1243 1263 1270 1296 1336 1456 1556

 440  490  520  560  575  690  720  810  870  870  920  940 1025 1025

 428  485  530  565  585  665  710  775  820  820  860  900  970 1010

50 60 60 65 70 70 70 70 70 70 70 70 70 70

 110  160  235  285  340  560  685  880  980 1100 1280 1460 1990 2400

1 2 3 4 5

In inch working load limit

diameter diameter diameter bow pin eye

t

a inch

b inch

c inch

 120  150  200  250  300  400  500  600  700  800  900 1000 1250 1500

 3  3/4  4  1/8  4 23/32  5  1/8  5  1/2  6 11/16  7  3/32  7  7/8  8  9/32  8  9/32  8 21/32  9  7/16 10  1/4 11  1/32

 3  3/4  4  1/4  5  1/8  5  1/2  5 29/32  6  7/8  7  9/32  8  1/16  8 15/32  8 21/32  9  1/16  9  7/16 10  5/8 11 13/32

 8 3  /16  9  3/8 10 31/32 11 25/32 12 25/32 14 13/16 15 21/32 17 15/32 17  7/8 18  9/32 19  3/32 20  9/32 23  1/32 24 19/32

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

 5 25/32  6 21/32  7  1/16  8  1/16  8  1/16  9  3/32 10  3/32 11  3/32 12  1/8 12  1/8 12 29/32 13  3/4 14 17/32 14 17/32

15  3/4 16  5/32 20  3/16 21 13/16 24 11/32 26  5/16 28  9/32 28  9/32 28  9/32 28  9/32 28  9/32 28  9/32 30  1/4 32  7/32

 9  3/8 10 13/16 11 13/32 12 12 12 25/32 13 25/32 14  3/4 15  3/4 15  3/4 16 17/32 16 17/32 17 23/32 17 23/32

25 15/32 27  3/32 33 35 19/32 39  7/32 43 27/32 46 27/32 48 15/16 49 23/32 50 51  1/32 52 19/32 57  5/16 61  1/4

17  5/16 19  9/32 20 15/32 22  1/16 22  5/8 27  5/32 28 11/32 31  7/8 34  1/4 34  1/4 36  7/32 37 40 11/32 40 11/32

16 27/32 19  3/32 20  7/8 22  1/4 23  1/32 26  3/16 27 15/16 30  1/2 32  9/32 32  9/32 33 27/32 35  7/16 38  3/16 39  3/4

3 19/32 4  1/32 4  7/16 4 21/32 4 27/32 6 15/32 6 15/32 7  7/16 8  1/32 8  1/32 8 15/32 8 15/32 9  1/16 9  1/16

1 31/32 2  3/8 2  3/8 2  9/16 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4 2  3/4

weight each

lbs

 243  353  518  628  750 1235 1510 1940 2161 2425 2822 3219 4387 5291

6 7 8 9 10 11 12 13 14 15

25

16

Shackles

Green Pin® Wide Mouth Shackles bow shackles with safety bolt

• • • • •

G-4263

1

Material : bow and pin alloy steel, Grade 8, quenched and tempered Safety Factor : MBL equals 6 x WLL Finish : hot dipped galvanized Temperature Range : -20 °C up to +200 °C Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity

working load limit

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

k mm

kg

4.75 6.5 8.5 9.5 12 16 25 30 55 75

22 25 28 32 35 38 45 50 65 75

25 28 32 35 38 42 50 57 70 83

 52  59  66  72  79  88 103 118 145 166

22 25 28 32 35 38 45 50 65 75

 63  75  82  90 100 106 127 146 165 184

112 135 148 162 180 216 248 273 314 330

 88 105 115 126 140 159 175 207 213 254

173 204 225 248 274 319 370 411 487 530

157 182 201 217 240 248 296 338 389 432

132 155 171 190 210 235 265 307 343 404

23 25 28 31 34 19 24 27 33 40

2.08 3.14 4.36 5.95 7.87 12.5 18 25 48 70

width eye

width inside

length inside

width bow

length

length bolt

width

thickness nut

weight each

lbs

2 3 4 5

In inch working load limit

6 7 8 9 10 11 12 13 14 15 16

26

diameter diameter diameter bow pin eye

t

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

4.75 6.5 8.5 9.5 12 16 25 30 55 75

/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/2 3

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 3/4 3 1/4

2 /16 2  5/16 2 19/32 2 27/32 3  1/8 3 15/32 4  1/16 4 21/32 5 23/32 6 17/32

/8 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32 1 31/32 2  9/16 2 15/16

2 /32 2 15/16 3  7/32 3 17/32 3 15/16 4  3/16 5 5  3/4 6  1/2 7  1/4

 4 /32  5  5/16  5 13/16  6  3/8  7  3/32  8  1/2  9  3/4 10  3/4 12  3/8 13

 3 /32  4  1/8  4 17/32  4 31/32  5  1/2  6  1/4  6  7/8  8  5/32  8  3/8 10

 6 /16  8  1/32  8 27/32  9  3/4 10 25/32 12  9/16 14  9/16 16  3/16 19  3/16 20  7/8

 6 /16  7  5/32  7 29/32  8 17/32  9  7/16  9  3/4 11 21/32 13  5/16 15  5/16 17

 5 /16  6  3/32  6 23/32  7 15/32  8  9/32  9  1/4 10  7/16 12  3/32 13  1/2 15 29/32

/32 /32 1  3/32 1  7/32 1 11/32 3 /4 15 /16 1  1/16 1  5/16 1  9/16

7

 1

7

31

15

13

15

13

 3

 3

29 31

4.59 6.92 9.61 13.12 17.35 27.56 39.68 55.12 105.82 154.32

Shackles 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 27

16

Shackles

Green Pin® ROV Release Polar Shackles with spring pins

P-5363

• Material : bow and pin alloy steel, Grade 8, quenched and tempered • Finish : body white painted, pin green painted • Temperature Range : -40˚C up to +200˚C • Certificates : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity. • Note : for in-line use only it is up to the user to attach the safety pins with wire ropes etc. and attaching loops or monkey’s fists. Van Beest supplies the shackle body, the shackle pin and 2 spring pins.

working diameter diameter diameter load

bow

pin

eye

width

width

length

width

eye

inside

inside

bow

length

length

width

diameter weight

bolt

each

limit

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

28

a

b

c

d

e

f

g

h

i

j

k

t

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

17

38

42

 88

38

 60

146

 99

249

202

175

6.5

8.19

25

45

50

103

45

 74

178

126

300

249

216

8.5

14.22

kg

55

65

70

145

65

105

260

180

433

330

310

8.5

39.59

85

75

83

162

73

127

329

190

527

380

340

8.5

62

Shackles

Green Pin® ROV Release Polar Shackles with locking clamp

P-5365

• Material : bow and pin alloy steel, Grade 8, quenched and tempered • Safety Factor : MBL equals 8x WLL for shackles with WLL 17 t and 25 t, MBL equals 6x WLL for shackles with WLL 55 t and 85 t • Finish : body white painted, pin green painted • Temperature Range : -40˚C up to +200˚C • Certificates : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity. • Note : it is up to the user to attach the locking clamp with wire ropes etc. and attaching loops or monkey’s fists. Van Beest supplies the shackle body, the shackle pin and locking clamp with spring pin.

working diameter diameter diameter

width

width

length

width

bow

pin

eye

eye

inside

inside

bow

a

b

c

d

e

f

g

h

i

j

k

t

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg

17

38

42

 88

38

 60

146

 99

250

217

175

48

8.19

25

45

50

103

45

 74

178

126

300

250

216

48

14.22

load

length

length

width

bolt

limit

width

weight

locking

each

clamp

55

65

70

145

65

105

260

180

433

330

310

48

39.59

85

75

83

162

73

127

329

190

527

380

340

48

62

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

29

16

Shackles

Green Pin® ROV Spring Release Polar Shackles spring loaded

P-5367

• Material : bow and pin alloy steel, Grade 8, quenched and tempered • Finish : body white painted, pin green painted • Temperature Range : -40˚C up to +200˚C • Certificates : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity. • Note : for in-line use only this shackle is assembled with rope slings and monkey’s fist for size starting from WLL 42.5 up to and including 150T a special mounting tool (tensioner) is required to assemble the shackle

working diameter diameter diameter load

bow

pin

eye

width

width

length

width

eye

inside

inside

bow

length

length

width

bolt

weight each

limit t

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

30

a

b

c

d

e

f

g

h

i

j

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg

12

 32

 35

 72

 32

 51

115

 83

201

262

147

  6

13.5

 35

 38

 80

 35

 57

133

 92

227

275

162

  7

17

 38

 42

 88

 38

 60

146

 99

249

330

175

 14

25

 45

 50

103

 45

 74

178

126

300

352

216

 16

35

 50

 57

116

 50

 83

197

138

334

373

238

 21

42.5

 57

 65

130

 57

 95

222

160

377

442

274

 32

55

 65

 70

145

 65

105

260

180

433

470

310

 43

85

 75

 83

162

 73

127

329

190

527

579

340

 71

120

 95

 95

208

 91

147

399

238

646

674

428

131

150

105

108

238

102

169

410

275

688

699

485

171

Shackles 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 31

16

Shackles

Green Pin® Trawling Shackles

bow shackles with square headed screw pin

• Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : meets performance requirements of US Fed. Spec. RR-C-271, Grade A • Finish : hot dipped galvanized • Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity G-4164 working load limit

1

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

width bolt head k mm

weight each

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

13.5 16 19 22 25 28 32 35 38 45

16 19 22 25 28 32 35 80 42 50

 34  40  46  52  59  66  72  80  88 103

13 16 19 22 25 28 32 35 38 45

22 27 31 36 43 47 51 57 60 74

 51  64  76  83  95 108 115 133 146 178

 32  43  51  58  68  75  83  92  99 126

 89 110 129 144 164 185 201 227 249 300

57.5 71  82  93 108 120 137 149 164 192

 58  75  89 102 118 131 147 162 175 216

22 27 32 32 36 41 50 50 60 60

0.34 0.63 1 1.44 2.21 3.18 4.32 5.67 7.36 12.38

width eye

width inside

length inside

width bow

length

length bolt

width

weight each

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

width bolt head k inch

1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4  1/16

/2  5 /8  3 /4  7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32

/8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32

2 2 17/32 3 3  9/32 3  3/4 4  1/4 4 17/32 5  1/4 5  3/4 7

1  1/4 1 11/16 2 2  9/32 2 11/16 2 15/16 3  9/32 3  5/8 3 29/32 4 31/32

 3  1/2  4 11/32  5  3/32  5 21/32  6 15/32  7  9/32  7 29/32  8 15/16  9 13/16 11 13/26

2  1/4 2 25/32 3  7/32 3 21/32 4  1/4 4 23/32 5 13/32 5  7/8 6 15/32 7  9/16

2  9/32 2 15/16 3  1/2 4  1/32 4 21/32 5  5/32 5 25/32 6  3/8 6  7/8 8  1/2

/8 1  1/16 1  1/4 1  1/4 1 13/32 1  5/8 1 31/32 1 31/32 2  3/8 2  3/8

0.75 1.39 2.21 3.17 4.86 7.01 9.52 12.49 16.23 27.29

kg

2 3 4 5

In inch working load limit

6

t

7

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

8 9 10 11 12 13 14 15 16

32

diameter diameter diameter bow pin eye a inch

/2 5 /8 3 /4 7 /8

b inch

/8 3 /4 7 /8

1

5

1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2

 1

 7

 7

lbs

Shackles

Green Pin® Trawling Shackles

dee shackles with square headed screw pin

• Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : meets performance requirements of US Fed. Spec. RR-C-271, Grade A • Finish : hot dipped galvanized • Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity G-4154 working load limit t

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

13.5 16 19 22 25 28 32 35 38 45

16 19 22 25 28 32 35 38 42 50

 34  40  46  52  59  66  72  80  88 103

13 16 19 22 25 28 32 35 38 45

22 27 31 36 43 47 51 57 60 74

 43  51  59  73  85  90  94 115 127 149

 81  97 112 134 154 167 180 209 230 271

57.5 71 82 93 108 120 137 149 164 192

width bolt head i mm

22 27 32 32 36 41 50 50 60 60

weight each

kg

0.32 0.58 0.92 1.33 2.03 2.88 3.96 5.24 6.8 11.22

1 2 3 4 5

In inch working load limit t

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

a inch

b inch

c inch

d inch

e inch

f inch

g inch

/8 3 /4 7 /8

1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32 4  1/16

/2  5 /8  3 /4  7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2 1 25/32

/8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8 2 29/32

1 11/16 2 2  5/16 2  7/8 3 11/32 3 17/32 3 11/16 4 17/32 5 5  7/8

 3  3/16  3 13/16  4 13/32  5  9/32  6  1/16  6  9/16  7  3/32  8  7/32  9  1/16 10 21/32

/2 5 /8 3 /4 7 /8 1

5

1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2

 1

 7

weight each

h inch

width bolt head i inch

2  1/4 2 25/32 3  7/32 3 21/32 4  1/4 4 23/32 5 13/32 5  7/8 6 15/32 7  9/16

/8 1  1/16 1  1/4 1  1/4 1 13/32 1  5/8 1 31/32 1 31/32 2  3/8 2  3/8

0.7 1.28 2.03 2.93 4.48 6.35 8.72 11.56 15 24.74

 7

lbs

6 7 8 9 10 11 12 13 14 15

33

16

Shackles

Green Pin® Sunken Hole Shackles

bow shackles with square sunken hole screw pin

• • • • •

Material Safety Factor Standard Finish Certification

: : : : :

bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity : key for unscrewing the pin must be ordered separately

• Note G-4169 working load limit

1

diameter diameter diameter bow pin eye

width eye

width inside

length inside

width bow

length

length bolt

width

size hole

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

k mm

kg

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17

13.5 16 19 22 25 28 32 35 38

16 19 22 25 28 32 35 38 42

34 40 46 52 59 66 72 80 88

13 16 19 22 25 28 32 35 38

22 27 31 36 43 47 51 57 60

 51  64  76  83  95 108 115 133 146

32 43 51 58 68 75 83 92 99

 89 110 129 144 164 185 201 227 249

 51  63  74  85  99 110 122 135 145

 58  75  89 102 118 131 147 162 175

11 11 11 13 13 17 17 17 17

0.31 0.56 0.98 1.46 2.18 3.06 4.24 5.59 7.37

width eye

width inside

length inside

width bow

length

length bolt

width

size hole

weight each

2 3 4 5

In inch working load limit

6

t

7 8 9 P-4170

10 11 12 13 14 15 16

34

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17

diameter diameter diameter bow pin eye a inch

/2 5 /8 3 /4 7 /8

b inch

c inch

d inch

e inch

f inch

g inch

h inch

i inch

j inch

k inch

lbs

/8 3 /4 7 /8

1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32

/2  5 /8  3 /4  7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2

/8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8

2 2 17/32 3 3  9/32 3  3/4 4  1/4 4 17/32 5  1/4 5  3/4

1  1/4 1 11/16 2 2  9/32 2 11/16 2 15/16 3  9/32 3  5/8 3 29/32

3  1/2 4 11/32 5  3/32 5 21/32 6 15/32 7  9/32 7 29/32 8 15/16 9 13/16

2 2 15/32 2 29/32 3 11/32 3 29/32 4 11/32 4 13/16 5  5/16 5 23/32

2  9/32 2 15/16 3  1/2 4  1/32 4 21/32 5  5/32 5 25/32 6  3/8 6  7/8

/16 7 /16 7 /16 1 /2 1 /2 21 /32 21 /32 21 /32 21 /32

0.68 1.23 2.16 3.22 4.81 6.75 9.35 12.32 16.25

1

5

1 1 1/8 1 1/4 1 3/8 1 1/2

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8

 1

 7

7

Shackles

Green Pin® Sunken Hole Shackles

dee shackles with square sunken hole screw pin

G-4159

• Material : bow and pin high tensile steel, Grade 6, quenched and tempered • Safety Factor : MBL equals 6 x WLL • Standard : meets performance requirements of US Fed. Spec. RR-C-271, Grade A • Finish : hot dipped galvanized • Certification : at no extra charges this product can be supplied with a works certificate, material certificate, manufacturer test certificate and/or EC Declaration of Conformity • Note : key for unscrewing the pin must be ordered separately working load limit

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

size hole

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

kg

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17

13.5 16 19 22 25 28 32 35 38

16 19 22 25 28 32 35 38 42

34 40 46 52 59 66 72 80 88

13 16 19 22 25 28 32 35 38

22 27 31 36 43 47 51 57 60

 43  51  59  73  85  90  94 115 127

 81  97 112 134 154 167 180 209 230

 51  63  74  85  99 110 122 135 145

11 11 11 13 13 17 17 17 17

0.34 0.6 0.98 1.26 2.14 3.05 3.56 5.17 6.84

1 2 3 4 5

In inch working load limit t

P-4170

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17

diameter bow

diameter pin

diameter eye

width eye

width inside

length inside

length

length bolt

size hole

a inch

b inch

c inch

d inch

e inch

f inch

g inch

h inch

i inch

lbs

1 11/32 1  9/16 1 13/16 2  1/16 2  5/16 2 19/32 2 27/32 3  5/32 3 15/32

/2  5 /8  3 /4  7 /8 31 /32 1  3/32 1  1/4 1  3/8 1  1/2

/8 1  1/16 1  7/32 1 13/32 1 11/16 1 27/32 2 2  1/4 2  3/8

1 11/16 2 2  5/16 2  7/8 3 11/32 3 17/32 3 11/16 4 17/32 5

3  3/16 3 13/16 4 13/32 5  9/32 6  1/16 6  9/16 7  3/32 8  7/32 9  1/16

2 2 15/32 2 29/32 3 11/32 3 29/32 4 11/32 4 13/16 5  5/16 5 23/32

/16  7 /16  7 /16  1 /2  1 /2 21 /32 21 /32 21 /32 21 /32

0.75 1.33 2.15 2.77 4.72 6.72 7.84 11.4 15.08

/2 5 /8 3 /4 7 /8

/8 3 /4 7 /8

1

5

1 1 1/8 1 1/4 1 3/8 1 1/2

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8

 1

7

 7

weight each

6 7 8 9 10 11 12 13 14 15

35

16

Shackles

Mooring Shackles

bow shackles with screw pin

• Material • Finish • Note

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1165

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

36

diameter bow a mm

diameter pin b mm

diameter eye c mm

width inside d mm

length inside e mm

width bow f mm

weight each

32 38 45 50 65

32 38 45 50 65

 74  89 104 111 145

 64  76  90 100 130

134 160 189 210 273

 96 114 135 155 195

 4.2  7.8 12.5 17.4 35.6

kg

Shackles

Shackles generally to DIN 82016 type B bow shackles with safety bolt

• • • • • •

Material Safety Factor Standard Finish Certification Note

no.

S-3466 G-3466

  8  10  12  16  20  25  32  40  50  63  80 100

working load limit

: : : : : :

bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82016 type B hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate. with screw collar pin : up to size no. 25 with hand-grip : from size no. 32

thickness bow

thickness bow

diameter pin

diameter eye

width inside

length inside

width bow

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

  8  10  12  16  20  25  32  40  50  63  80 100

 54  60  67  76  85  92 100 107 120 135 150 165

 38  42  47  52  58  63  70  79  88  96 110 125

 45  48  52  60  68  72  80  90 100 110 125 140

 90  96 104 120 136 144 160 180 200 220 250 280

 60  66  73  81  90 100 110 125 140 155 175 200

152 166 184 210 231 254 285 315 360 395 447 500

 93 102 114 128 140 155 175 195 220 245 275 305

weight each

kg

9.3 12 15.7 21 31.4 39.4 53.3 75.3 105 137 200 300

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 37

16

Shackles

Shackles generally to DIN 82101 type A dee shackles with screw collar pin

• • • • • • S-3351 G-3351

Material Safety Factor Standard Finish Certification Note

no.

: : : : : :

working load limit t

0.1 0.16 0.25 0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10 12 16 20 25

1 2 3 4

0.1 0.16 0.25 0.4 0.63 1 1.6 2 2.5 3.15 4 5 6.3 8 10 12 16 20 25

bow and pin high tensile steel, Grade 4 MBL equals 5 x WLL generally to DIN 82101 type A hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate. shackle no. 0.1 is electro-galvanized and will not have any markings as it is too small

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm

b mm

c mm

d mm

e mm

 5  6  8 10 12 13 16 20 22 25 28 32 36 41 44 49 55 61 67

 5  6  8 10 12 16 20 22 24 27 30 36 39 45 48 52 60 68 72

 10  12  16  20  24  32  40  44  48  54  60  72  78  90  96 104 120 136 144

  7   8  11  14  17  21  27  30  33  38  42  47  53  60  66  73  81  90 100

15.5 18 24 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147 158 185 211 221

weight each

kg

0.017 0.024 0.054 0.097 0.18 0.3 0.57 0.975 1.3 1.85 2.53 4 5.3 7.9 10 13.5 19.2 28 34

5 6

Shackles generally to DIN 82101 type B dee shackles with counter sunk screw pin

7

• • • • • •

8 9

S-3352 G-3352

Material Safety Factor Standard Finish Certification Note no.

10 0.1 0.16 0.25 0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10

11 12 13 14 15 16

38

: : : : : : working load limit

bow and pin high tensile steel, Grade 4 MBL equals 5 x WLL generally to DIN 82101 type B hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate. shackle no. 0.1 is electro-galvanized and will not have any markings as it is too small diameter bow

diameter pin

diameter eye

width inside

length inside

t

a mm

b mm

c mm

d mm

e mm

0.1 0.16 0.25 0.4 0.63 1 1.6 2 2.5 3.15 4 5 6.3 8 10

 5  6  8 10 12 13 16 20 22 25 28 32 36 41 44

 5  6  8 10 12 16 20 22 24 27 30 36 39 45 48

10 12 16 20 24 32 40 44 48 54 60 72 78 90 96

 7  8 11 14 17 21 27 30 33 38 42 47 53 60 66

15.5 18 24 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147

weight each

kg

0.014 0.023 0.052 0.093 0.173 0.29 0.543 0.95 1.23 1.8 2.6 3.8 5.2 7.6 9.7

Shackles

Shackles generally to DIN 82101 type C

dee shackles with safety bolt • • • • • •

Material Safety Factor Standard Finish Certification Note

no.

S-3356 G-3356

0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10 12 16 20 25 32 40 50 63 80 100

: : : : : :

working load limit

bow and pin high tensile steel, Grade 4 MBL equals 5 x WLL generally to DIN 82101 type C hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate. with screw collar pin : up to size no. 25 with hand-grip : from size no. 32 diameter bow

diameter pin

diameter eye

width inside

length inside

t

a mm

b mm

c mm

d mm

e mm

0.4 0.63 1 1.6 2 2.5 3.15 4 5 6.3 8 10 12.5 16 20 25 32 40 50 63 80 100

 10  12  13  16  20  22  25  28  32  36  41  44  49  55  61  67  74  75  88  96 110 125

 10  12  16  20  22  24  27  30  36  39  45  48  52  60  68  72  80  90 100 110 125 140

 20  24  32  40  44  48  54  60  72  78  90  96 104 120 136 144 160 180 200 220 250 280

 14  17  21  27  30  33  38  42  47  53  60  66  73  81  90 100 110 125 140 155 175 200

30 36 49 61 67 73 83.5 91 111 119.5 139.5 147 158 185 211 221 246 276 307 339 385.5 430

weight each

kg

0.113 0.2 0.37 0.686 1.125 1.5 2.15 2.93 4.7 6.33 8.5 10.8 14.4 20.5 29.5 36 49 75 100 140 200 280

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 39

16

Shackles

Yellow Pin Shackles

bow shackles with screw collar pin

• • • •

Material Standard Finish Note working load limit

G-3161

1 2

: : : :

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

weight each

t

a mm

b mm

c mm

d mm

e mm

f mm

kg

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

 5  6  8 10 11 13 16 19 22 25 28 32 35 38 45

 6  8 10 11 13 16 19 22 25 28 32 35 38 42 50

 14  16  19  23  27  30  38  46  53  61  68  76  84  92 106

9.5 12 13.5 17 19 20 27 32 36 43 46 51 57 60 73

 22  29  31  37  43  48  60  71  84  95 108 119 133 146 177

 15  20  21  26  29  33  43  50  58  68  74  82  92  98 127

0.03 0.05 0.09 0.14 0.2 0.33 0.62 1.07 1.64 2.28 3.36 4.31 6.14 7.81 12.61

weight each

3 4 Yellow Pin Shackles

5

bow shackles with safety bolt

6

• • • •

7 G-3163

8 9 10 11 12 13 14 15 16

40

Material Standard Finish Note working load limit

: : : :

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

t

a mm

b mm

c mm

d mm

e mm

f mm

kg

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

13 16 19 22 25 28 32 35 38 45

16 19 22 25 28 32 35 38 42 50

 30  38  46  53  61  68  76  84  92 106

 20  27  32  36  43  46  51  57  60  73

 48  60  71  84  95 108 119 133 146 177

 33  43  50  58  68  74  82  92  98 127

0.36 0.7 1.1 1.79 2.57 3.75 5.32 7.19 9.44 15.4

Shackles

Yellow Pin Shackles

dee shackles with screw collar pin

• • • • G-3151

Material Standard Finish Note

: : : :

working load limit

diameter bow

diameter pin

diameter eye

width inside

length inside

t

a mm

b mm

c mm

d mm

e mm

kg

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

 5  6  8 10 11 13 16 19 22 25 28 32 35 38 45

 6  8 10 11 13 16 19 22 25 28 32 35 38 42 50

 12  16  19  23  27  30  38  46  53  61  68  76  84  92 106

9.5 12 13.5 17 19 20 27 32 36 43 46 51 57 60 73

 19  22  26  32  37  41  51  60  71  81  90 100 111 122 146

0.03 0.05 0.08 0.13 0.2 0.27 0.57 1.19 1.43 2.16 3.06 4.11 5.28 7.24 12.14

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality weight each

1 2 3 4

Yellow Pin Shackles

5

dee shackles with safety bolt

• • • • G-3153

Material Standard Finish Note working load limit

: : : :

6

bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

7

diameter bow

diameter pin

diameter eye

width inside

length inside

weight each

t

a mm

b mm

c mm

d mm

e mm

kg

2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

13 16 19 22 25 28 32 35 38 45

16 19 22 25 28 32 35 38 42 50

 30  38  46  53  61  68  76  84  92 106

20 27 32 36 43 46 51 57 60 73

 41  51  60  71  81  90 100 111 122 146

0.35 0.65 1.02 1.75 2.52 3.5 4.91 5.84 8.4 11.9

8 9 10 11 12 13 14 15 41

16

Shackles

Shackles generally to B.S. 3032 table 3 large bow shackles with screw collar pin

• • • • • S-2761 E-2761 G-2761

Material Safety Factor Standard Finish Certification

working load limit t

0.15 0.45 0.75 1.25 2 2.75 3.75 4.75 5.75 7.25 8.5 9.5 11.5 13 15 18.5 20 25 30 35 40 50 65 80

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

42

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 3 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm

b mm

c mm

d mm

e mm

f mm

  6  10  13  16  19  22  25  28  32  35  38  42  44  48  51  57  60  67  73  79  86  95 108 117

 10  13  16  19  22  25  28  32  35  38  44  48  51  54  57  63  67  73  79  86  92 102 117 127

 19  25  32  38  44  51  57  63  70  76  89  94 102 108 114 127 133 146 159 171 184 203 235 254

 13  16  22  28  35  41  44  51  57  63  70  76  86  92  98 105 111 121 133 146 159 171 197 216

 28  41  54  70  86  98 108 124 137 152 168 187 206 222 238 257 273 302 330 359 387 429 483 533

 19  25  32  41  51  57  64  73  83  89  98 111 121 130 140 152 162 178 197 213 229 254 286 308

weight each

kg

0.12 0.18 0.37 0.72 1.20 1.85 2.61 3.78 5.17 6.46 8.34 11.1 14.5 17.8 25.5 34.4 36.8 45 62.2 81.8 95 131 194 274

Shackles

Shackles generally to B.S. 3032 table 4 small bow shackles with screw collar pin

• • • • • S-2765 E-2765 G-2765

Material Safety Factor Standard Finish Certification

working load limit t

0.2 0.5 1 1.5 2 3 4 5 6.25 7.5 9.25 10.5 12.5 14.25 16.5 18.5 20 25 30 35 40 50 65 80

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 4 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm

b mm

c mm

d mm

e mm

f mm

  6  10  13  16  19  22  25  28  32  35  38  41  44  48  51  54  57  63  70  76  79  89 102 114

 10  13  16  19  22  25  28  32  35  38  44  48  51  54  57  60  63  70  79  86  89  98 114 127

 19  25  32  38  44  51  57  63  70  76  89  95 102 108 114 121 127 140 159 171 178 203 229 254

 13  16  22  28  35  38  44  51  57  60  67  73  79  86  92  95 105 114 127 137 143 159 184 206

 25  38  51  64  76  89 102 114 127 140 152 165 178 191 203 216 229 254 279 305 318 356 406 457

 16  22  29  38  44  51  60  67  76  83  89  98 105 114 121 127 137 152 168 184 191 213 244 273

weight each

kg

0.11 0.17 0.35 0.66 1.06 1.68 2.47 3.48 4.79 5.95 7.55 9.79 12.5 15.3 21.8 28.9 30.9 37.8 52.6 69.5 78.1 109 163 235

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 43

16

Shackles

Shackles generally to B.S. 3032 table 2 large dee shackles with screw collar pin

• • • • • S-2751 E-2751 G-2751

Material Safety Factor Standard Finish Certification working load limit t

0.25 0.5 0.75 1.5 2 3 3.75 5 6 7 9.5 11.25 13 14.25 16.25 18 20 25 30 35 40 50 65 80

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

44

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 2 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm

b mm

c mm

d mm

e mm

  6  10  13  16  19  22  25  28  32  35  38  42  44  48  51  54  57  64  70  76  79  89 102 114

 10  13  16  19  22  25  28  32  35  38  45  48  51  54  57  60  64  73  79  86  89 102 114 127

 19  25  32  38  44  51  57  64  70  76  83  89  95 108 114 121 127 146 159 171 178 203 229 254

 13  19  28  32  38  44  51  54  60  67  70  76  83  92  98 105 108 121 133 146 149 171 191 219

 25  38  54  64  73  83  95 105 114 127 137 146 156 178 187 197 210 235 260 279 292 330 375 419

weight each

kg

0.11 0.17 0.35 0.66 1.02 1.57 2.3 3.2 4.3 5.4 6.8 8.7 11 14.3 20 26.4 28.3 35 49 63.6 71.7 101 151 215

Shackles

Shackles generally to B.S. 3032 table 1 small dee shackles with screw collar pin

• • • • • S-2755 E-2755 G-2755

Material Safety Factor Standard Finish Certification working load limit t

0.3 0.6 1 1.75 2.5 3.5 4.5 5.5 7 8 10.75 13 14.75 16.75 19 20 25 30 35 40 50 65 80

: : : : :

bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 1 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate

diameter bow

diameter pin

diameter eye

width inside

length inside

weight each

a mm

b mm

c mm

d mm

e mm

kg

  6  10  13  16  19  22  25  28  32  35  38  42  44  48  51  54  60  64  70  73  83  92 102

 10  13  16  19  22  25  28  32  35  38  45  48  51  54  57  60  70  73  79  83  95 108 117

 19  25  32  38  44  51  57  64  70  83  89  95 102 108 114 121 140 146 159 165 190 216 235

   9.5  16  22  25  32  35  38  44  48  54  60  64  70  73  76  83  92  98 108 111 127 140 156

 22  35  48  57  70  83  92 105 114 127 140 149 162 171 184 197 219 229 254 264 298 333 368

0.1 0.16 0.31 0.59 0.98 1.55 2.2 3.1 4.2 5.1 6.6 8.1 10.5 13.3 19.2 22.4 25.3 31.5 47 60.2 68.5 98 147

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 45

16

Shackles

Commercial Shackles

bow shackles with screw collar pin

• Material • Finish • Note

S-1161 E-1161

1 2 3

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

diameter

diameter

diameter

width

length

width

weight

bow

pin

eye

inside

inside

bow

per 100 pcs

a mm

b mm

c mm

d mm

e mm

f mm

kg

 5  6  8 10 11 12 14 16 19 22 25 28 32 38 45 50 57 65

 5  6  8 10 11 12 14 16 19 22 25 28 32 38 45 50 57 65

 10  12  16  20  22  24  28  32  38  44  50  56  64  76  90 100 114 130

 10  12  16  20  22  24  28  32  38  44  50  56  64  76  90 100 114 130

 20  24  32  40  44  48  56  64  76  88 100 112 128 152 180 200 228 260

 15  18  24  30  33  36  42  48  57  66  75  84  96 114 135 150 171 195

1.54 2.66 6.29 12.3 16.4 21.2 33.7 50.3 98.3 131 192 270 403 674 1120 1536 2276 3375

weight per 100 pcs

4 Commercial Shackles

5

bow shackles with square head screw pin

6

• Material • Finish • Note

7 8

S-1164

9 10 11 12 13 14 15 16

46

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm

b mm

c mm

d mm

e mm

f mm

kg

 6  8 10 11 12 14 16 19 22 25 28 32 38

 6  8 10 11 12 14 16 19 22 25 28 32 38

12 16 20 22 24 28 32 38 44 50 56 64 76

12 16 20 22 24 28 32 38 44 50 56 64 76

 24  32  40  44  48  56  64  76  88 100 112 128 152

 18  24  30  33  36  42  48  57  66  75  84  96 114

2.7 6.4 12.5 16.6 21.6 34.3 51.2 100 133 195 275 410 686

Shackles

Commercial Shackles

bow shackles with counter sunk screw pin

• Material • Finish • Note

S-1162 E-1162

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

a mm

b mm

c mm

d mm

e mm

f mm

 8 10 11 12 14 16 19 22 25

 8 10 11 12 14 16 19 22 25

16 20 22 24 28 32 38 44 50

16 20 22 24 28 32 38 44 50

 32  40  44  48  56  64  76  88 100

24 30 33 36 42 48 57 66 75

weight per 100 pcs kg

6 11.6 15.5 20.1 31.9 47.6 93.1 124 182

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 47

16

Shackles

Commercial Shackles

dee shackles with screw collar pin

• Material • Finish • Note

S-1151 E-1151

1 2

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm

b mm

c mm

d mm

e mm

 5  6  8 10 11 12 14 16 19 22 25 28 32 38 45 50 57 65

 5  6  8 10 11 12 14 16 19 22 25 28 32 38 45 50 57 65

 10  12  16  20  22  24  28  32  38  44  50  56  64  76  90 100 114 130

 10  12  16  20  22  24  28  32  38  44  50  56  64  76  90 100 114 130

 20  24  32  40  44  48  56  64  76  88 100 112 128 152 180 200 228 260

weight per 100 pcs kg

1.47 2.56 6.06 11.8 15.8 20.5 32.5 48.5 94.7 126 185 260 388 650 1080 1480 2192 3252

3 4 Commercial Shackles

5

dee shackles with square head screw pin

6

• Material • Finish • Note

7 S-1154

8 9 10 11 12 13 14 15 16

48

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

diameter bow

diameter pin

diameter eye

width inside

length inside

weight per 100 pcs

a mm

b mm

c mm

d mm

e mm

kg

 6  8 10 11 12 14 16 19 22 25 28 32 38

 6  8 10 11 12 14 16 19 22 25 28 32 38

12 16 20 22 24 28 32 38 44 50 56 64 76

12 16 20 22 24 28 32 38 44 50 56 64 76

 24  32  40  44  48  56  64  76  88 100 112 128 152

2.6 6.17 12 16 20.8 33.1 49.4 96.4 128 188 265 395 661

Shackles

Commercial Shackles

dee shackles with counter sunk screw pin

• Material • Finish • Note

S-1152 E-1152

: mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm

b mm

c mm

d mm

e mm

 8 10 11 12 14 16 19 22 25

 8 10 11 12 14 16 19 22 25

16 20 22 24 28 32 38 44 50

16 20 22 24 28 32 38 44 50

 32  40  44  48  56  64  76  88 100

weight per 100 pcs kg

5.72 11.2 14.9 19.3 30.7 45.8 89.5 119 175

1 2 3 4 Commercial Shackles

5

danlino V shackles with square head screw pin

• Material • Finish • Note

S-1170

6

: mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

diameter bow

diameter pin

diameter eye

width inside

length inside

a mm

b mm

c mm

d mm

e mm

kg

32

32

64

78

120

470

7

weight per 100 pcs

8 9 10 11 12 13 14 15 49

16

Thimbles

Applications Thimbles are used to protect steel wire rope, fibre rope or synthetic rope. They are available in various models and sizes. All indicated types of thimbles can be used in combination with the above mentioned types of ropes.

Range Van Beest offers a wide range of thimbles, from nationally standardized models to all types of commercially available thimbles.

Design Thimbles can be cold-rolled, hot-rolled or die-cast, depending on the specific use of the thimbles.

Finish The finish is either self coloured, painted, electro-galvanized or hot dipped galvanized.

Certification

1

Upon request, all thimbles can be supplied with a works certificate.

Instructions for use

2

It is required that the thimbles are regularly inspected and the inspection should take place in accordance with the standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading with a consequence of deformation and/or alteration of the steel structure.

3 4

The dimensions of the thimbles must be so that the (wire) rope fits properly into the groove of the thimble. The nominal size of the thimble is the diameter of the (wire) rope with which it is intended to be used. For (wire) ropes of intermediate sizes, the next larger size of thimble must be used.

5

Before use, check if the thimble is free from impurities, sharp edges, cracks or other irregularities which may damage the wire rope and therefore affect the strength or reliability of the wire rope.

6 7 8 9 10 11 12 13 14 15 16

50

Thimbles

Thimbles

standard commercial • Material • Finish • Certification

E-6110

: mild steel : electro-galvanized : a works certificate can be supplied upon request

diameter rope

width groove

length

width

length inside

width inside

weight per 100 pcs

mm

a mm

b mm

c mm

d mm

e mm

kg

 3  4  5  6  7  8  9 10 11 12 14 16 18 20 22 24 26 28 30 32

 3  4  5  6  7  8  9 10 11 12 14 16 18 20 22 24 26 28 30 32

 24  25  31  37  44  51  57  64  70  76  82  89 102 115 127 140 152 165 178 203

 18  19  22  29  32  38  42  44  51  57  60  64  69  79  89 102 105 115 121 133

 15  16  22  26  32  34  38  42  48  51  57  60  67  76  83  88 102 110 115 140

10 11 16 19 22 24 29 32 35 38 40 42 45 51 54 64 68 73 79 93

0.4 0.4 0.8 1.4 2 2.8 3 4.8 7.5 8 10 15 22 25 32 46 66 77 80 130

1 2 3 4

Thimbles

5

heavy duty stub-end • Material • Finish • Certification G-6120

6

: mild steel : hot dipped galvanized : a works certificate can be supplied upon request

diameter rope

width groove

length

length inside

width inside

thickness back

mm

a mm

b mm

c mm

d mm

e mm

kg

 8 10 12 14 16 18 20 22 24 28 32 36 40 44 50 56 64

 8 10 12 14 16 18 20 22 24 28 32 36 40 44 50 56 64

 51  64  76  89 102 114 127 140 152 178 203 229 254 279 305 356 407

 35  47  57  65  76  86  94 107 114 130 157 177 198 214 215 245 275

 22  30  35  45  50  53  60  65  70  80 100 115 120 130 140 160 180

4 4 5 6 6 8 9 10 10 10.5 10.5 12 12 15 20 20 20

   6    7   14   22   24   43   65   93  102  135  162  363  376  608  960 1400 1700

7

weight per 100 pcs

8 9 10 11 12 13 14 15 51

16

Thimbles

Thimbles

Heavy Duty Stub-end, reinforced with welded fillet plate • Material : mild steel • Finish : hot dipped galvanized reinforced with a welded fillet plate • Certification : a works certificate can be supplied upon request G-6128

f

f g

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

52

width groove a g mm

width overall b mm

length

width

width inside f mm

thickness back g mm

weight per piece

d mm

length inside e mm

c mm

 35  40  50  62  72  85 100 115

 55  65  80 100 115 125 150 165

220 245 290 360 390 470 540 570

150 160 200 250 265 300 370 380

100 120 125 160 175 245 290 300

 80  90 110 140 160 190 200 210

10 12 16 20 20 20 25 25

3.2 5.1 9.2 17.4 19.4 29 39 52

kg

Thimbles

Thimbles

generally to DIN 6899 (B) • Material : mild steel • Standard : generally to DIN 6899 (B) • Finish : thimbles for rope diameters up to and including 6 mm are electro-galvanized, other diameters are hot dipped galvanized • Certification : a works certificate can be supplied upon request E-6131 G-6131

diameter rope

width groove

length

length inside

width inside

thickness back

weight per 100 pcs

mm

a mm

b mm

c mm

d mm

e mm

kg

2.5 3.5 4 5 6 7 9 11 13 13 15 16 17 18 20 22 24 26 28 30 32 34 36 38 40 42 47 57 63 72 87 97

  3   4   5   6   7   8  10  12  13  14  16  17  18  20  22  24  26  28  30  32  34  36  38  40  42  45  50  60  65  75  90 100

 22  26  32  38  44  51  57  64  70  76  83  89  95 102 114 127 140 152 165 178 203 216 229 241 254 305 360 380 420 460 500 550

 19  21  23  25  28  32  38  45  48  51  58  61  64  72  80  90  99 112 120 128 152 160 176 184 192 240 265 275 300 350 370 380

 12  13  14  16  18  20  24  28  30  32  36  38  40  45  50  56  62  70  75  80  95 100 110 115 120 150 160 170 180 200 210 220

1.6 1.6 1.9 2.4 2.4 2.8 3.1 3.3 3.3 3.7 3.8 4.7 4.7 5.7 5.7 6.5 6.8 8 8 8 8.5 8.5 8.5 10.5 10.5 10.5 12 12 13 15 18 20

0.6 0.7 0.9 1.8 1.9 2.7 4.1 6.9 7.6 9.2 16.4 19 20.3 27.3 28.6 44.8 57.7 72 104 115 153 176 195 292 320 364 535 790 830 1200 2600 3050

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 53

16

Thimbles

Thimbles

generally to DIN 83311 • • • •

Material Standard Finish Certification

: : : :

mild steel generally to DIN 83311 hot dipped galvanized a works certificate can be supplied upon request

G-6133 nominal size

0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10 12 16 20 25 31 40

1 2 3 4

length inside

width inside

thickness back

a mm

b mm

c mm

d mm

 8 11 13 15 17 19 21 24 28 30 34 38 42 46 50 56 62 68

 36  50  60  68  76  85  95 110 125 135 150 170 190 205 225 250 280 306

 20  28  32  38  42  48  53  60  70  75  85  95 105 115 125 140 155 170

3 4 5 6 7 8 9 10 10.5 12 13 15 16 16 18 20 21 23

weight per 100 pcs kg

4.5 9.5 18 24 38 50 70 110 141 254 282 418 513 550 930 1303 1363 1930

Thimbles

according to DIN 3091

5

• • • •

6 S-6134

7 8 9

f

10 11 12 13 14 15 16

width groove

54

Material Standard Finish Certification

: : : :

cast mild steel, (GTW 40) according to DIN 3091 self coloured a works certificate can be supplied upon request

diameter rope

width groove

width overall

width

length

diameter

length

weight per 100 pcs

mm

a mm

b mm

c mm

d mm

e mm

f mm

kg

 8 10 12 14 16 18 20 22 24 26 28 32 36 40 44 48 52 56 64 72 80

 9 11 13 16 18 20 22 24 26 29 31 35 40 44 48 53 57 62 70 79 88

15 17.5 20 23.5 26 28.5 31 33.5 36 39.5 42 47 53 58 63 69 74 80 90 101 112

40 50 60 70 80 90 100 110 120 130 140 160 180 200 220 240 260 280 320 360 400

 66  82  98 114 130 145 161 177 193 209 224 256 288 320 352 384 416 448 512 576 640

 14  18  21  25  28  31  35  38  41  44  47  53  59  65  70  76  81  86  95 104 112

16 18 20 22 24 26 28 32 36 40 44 48 52 56 64 72 80

  18   32   52   80   90  121  161  211  271  355  420  630  884 1100 1500 2000 2500 3200 4600 6600 9000

Thimbles

Thimbles

generally to DIN 3090

E-6135 G-6135

• • • •

Material Standard Finish

: mild steel : generally to DIN 3090 : for diameter 4 and 6 mm electro-galvanized other diameters hot dipped galvanized : a works certificate can be supplied upon request

Certification diameter wire rope

width groove

width overall

width inside

length inside

thickness

thickness back

mm

a mm

b mm

c mm

d mm

e mm

f mm

 4  6  8 10 12 14 16 18 20 22 24 26 28 32 36 40 44 48 52 56 60 64 68 72 76 80

 5  7  9 11 13 16 18 20 22 24 26 29 31 35 40 44 48 53 57 62 66 70 75 79 84 88

  9  12  13  16  19  22  25  27  32  33  37  46  50  55  60  65  70  75  80  85  90  95 100 105 115 120

 10  15  20  25  30  35  40  45  50  55  60  65  70  80  90 100 110 120 130 140 150 160 170 180 190 200

 20  30  40  50  60  70  80  90 100 110 120 130 140 160 180 200 220 240 260 280 300 320 340 360 380 400

5.1 7.1 11 14 16 17 19 21 23 24 27 30 33 38 42 46 53 58 64 67 70 78 81 84 87 90

2.1 2.6 4 5 6 7 8 9 10 10 11 12 12 14 16 18 20 22 25 25 25 30 30 30 30 30

weight per 100 pcs kg

   1.4    3    7.1   17   24   36   50   62   90  100  130  220  240  270  430  570  850 1120 1530 2148 2300 3500 3700 4100 4600 5400

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 55

16

Thimbles

Thimbles

generally to EN13411-1 • • • •

Material Standard Finish Certification

: : : :

mild steel generally to EN13411-1 formerly BS 464 hot dipped galvanized a works certificate can be supplied upon request

G-6170 diameter rope

inch

/16 1 /4 5 /16 3 /8 7 /16 1 /2 9 /16 5 /8 11 /16 3 /4 13 /16 7 /8 15 /16 3

1 2

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 1/2 2 3/4

3 4 5 6 7 8 9 10 11 12 13 14 15 16

56

width groove

length

length inside

width inside

thickness back

mm

a mm

b mm

c mm

d mm

e mm

 5  7  8 10 11 13 15 16 17 19 21 22 24 25 28 32 35 38 42 45 47 50 54 57 65 70

5.5  6  8 10 13 14 15 17 19 20 21 23 25 27 29 33 38 41 46 51 60 64 64 67 70 86

 44  48  54  64  73  80  80  98 108 124 124 133 146 162 178 197 229 254 254 286 318 330 330 356 413 502

 28  30  33  38  41  44  44  59  67  73  73  83  92 108 111 133 152 165 165 178 191 203 203 216 241 273

 19  20  22  25  29  32  32  41  44  51  51  57  64  70  76  95 105 114 114 127 133 140 140 146 159 203

3 3.5 4 4.8 4.8 5.6 5.6 7.9 7.9 9.5 9.5 9.5 10.3 10.3 12.7 12.7 15.9 17.5 17.5 25.4 28.6 28.6 28.6 30.2 31.8 41.3

weight per 100 pcs kg

3.5 5.4 5.7 7.6 14.2 18 18.9 34 39.7 62.4 62.4 75.6 106 125 151 204 318 488 499 556 -

Thimbles

Thimbles

generally to US Fed. Spec. FF-T-276b type III

G-6142

• • • •

Material Standard

: mild steel : generally to US Federal Specification FF-T-276b type III : hot dipped galvanized : a works certificate can be supplied upon request

Finish Certification diameter rope

width groove

length

width

length inside

width inside

thickness back

mm

a mm

b mm

c mm

d mm

e mm

f mm

55.5 63.5 73 82.5 92 92 108 127 140 156 178 205 229 286 310 384 435 464 514

 38  46  54  60  70  68  79  97 108 125 149 173 181 206 216 264 302 311 356

41 47.5 54 60 70 70 82.5 95 108 114 130 159 165 203 229 305 356 378 419

22 27 28.5 32 38 38 44.5 51 57 63.5 73 89 89 102 114 152 178 178 200

1.6 2 2.8 3.2 3.6 3.6 4 5.5 5.5 6.3 6.3 12.7 12.7 12.7 12.7 12.7 12.7 19 19

weight per 100 pcs

 6  8  9 11 13 14 16 19 22 25 28 - 32 32 - 35 35 - 38 41 45 48 - 51 57 64 76

7 9 10 12 13.5 15 16.5 20 24 27 30 33 36.5 43.5 47 50 59.5 66 78.5

kg

3.4 6.3 11.3 16.2 23 23 33.8 66.2 83.3 135 185 375 540 731 810 1170 1935 2640 3850

1 2 3 4 5

In inch diameter rope

width groove

length

width

length inside

width inside

thickness back

inch

a inch

b inch

c inch

d inch

e inch

f inch

/4 /16 3 /8 7 /16 1 /2 9 /16 5 /8 3 /4 7 /8 1 7/8 1 1/8 - 1 1/4 1 1/4 - 1 3/8 1 3/8 - 1 1/2 1 5/8 1 3/4 1 7/8 - 2 2 1/4 2 1/2 3

/32 /32 13 /32 15 /32 17 /32 19 /32 21 /32 25 /32 15 /16 1  1/16 1  3/16 1  5/16 1  7/16 1 23/32 1 27/32 1 31/32 2 11/32 2 19/32 3  3/32

 1 5/8  1 7/8  2 1/8  2 3/8  2 3/4  2 3/4  3 1/4  3 3/4  4 1/4  4 1/2  5 1/8  6 1/4  6 1/2  8  9 12 14 14 7/8 16 1/2

7 /8 1 1/16 1 1/8 1 1/4 1 1/2 1 1/2 1 3/4 2 2 1/4 2 1/2 2 7/8 3 1/2 3 1/2 4 4 1/2 6 7 7 7 7/8

/16 /64 7 /64 1 /8 9 /64 9 /64 5 /32 7 /32 7 /32 1 /4 1 /4 1 /2 1 /2 1 /2 1 /2 1 /2 1 /2 3 /4 3 /4

6

weight per 100 pcs

1

5

9

11

 2 3/16  2 1/2  2 7/8  3 1/4  3 5/8  3 5/8  4 1/4  5  5 1/2  6 1/8  7  8 1/16  9 11 1/4 12 3/16 15 1/8 17 1/8 18 1/4 20 1/4

 1    1/2  1  13/16  2    1/8  2    3/8  2    3/4  2  11/16  3    1/8  3  13/16  4    1/4  4  15/16  5    7/8  6  13/16  7    1/8  8    1/8  8    1/2 10    3/8 11    7/8 12    1/4 14

1

5

7

lbs

7.5 13.9 24.9 35.7 50.7 50.7 74.5 146 184 298 408 827 1191 1612 1786 2579 4266 5820 8488

8 9 10 11 12 13 14 15 57

16

Thimbles

Thimbles

pennant line type

G-6151

• Material • Finish • Certification diameter wire rope

1 2 3

: mild steel : hot dipped galvanized produced with a welded fillet plate : a works certificate can be supplied upon request width groove

length

width

length inside

width inside

weight each

mm

a mm

b mm

c mm

d mm

e mm

kg

 16  18  20  22  24  28  30  36  40  44  50  56  64  76  82  90 120

 17  19  21  23  25  30  33  38  41  46  52  60  70  81  92 105 130

102 114 127 140 152 178 203 229 254 279 305 356 432 483 559 610 660

 75  85 100 110 115 135 155 175 190 210 225 240 290 320 375 410 450

 50  50  60  60  70  75  80 110 120 120 140 150 185 225 280 280 280

 50  53  60  65  70  80 100 115 120 130 140 150 180 220 240 250 280

0.4 0.5 0.8 0.9 1 1.7 2.5 4 4.5 7 8.3 12.5 19.5 29 35 42 58

4 Thimbles

5

for rope

6

• Material • Finish • Certification

7 E-6180

8 9 10 11 12 13 14 15 16

58

: mild steel : electro-galvanized : a works certificate can be supplied upon request

width groove

length

length inside

width inside

thickness back

a mm

b mm

c mm

d mm

e mm

 8 10 12 14 16 18 20 22 25 30 35 38

 43  50  55  60  66  77  91 100 115 140 140 140

27 30 36 41 43 47 58 67 71 91 91 91

16 19 22 24 26 30 35 38 45 55 55 55

1 1.5 1.75 2 2.5 3 3 3 3 3 3 4

weight per 100 pcs kg

1.1 1.7 3 3.5 8 13 16 24 25 43 45 45

Thimbles

Thimbles tubular type • Material • Finish • Certification

: mild steel : painted : a works certificate can be supplied upon request

P-6190 diameter wire rope

diameter

length

width inside

thickness

height

weight each

mm

a mm

b mm

c mm

d mm

e mm

kg

10 12 14 16 18 22 24 26 32 36 38 44

12 15 17 19 22 25 28 30 35 40 45 50

 90 105 115 120 140 180 180 195 215 212 260 280

23 27 27 32 35 45 45 47 60 70 70 75

4 5 5 5 5 6 7 7 7 9 7 7

 8 10 10 12 15 16 16 18 22 36 27 28

0.25 0.42 0.5 0.6 0.75 1.4 1.75 2 2.4 3 3.3 4.06

1 2 3 4

Thimbles

5

tubular type, with welded plate

6

Material : mild steel Finish : painted Certification : a works certificate can be supplied upon request diameter wire rope

P-6195 c

d a e

f b

c

d a

10 12 14 16 18 22 24 26 32 36 38

width groove

length

width inside

thickness

height

length inside

weight each

a mm

b mm

c mm

d mm

e mm

f mm

kg

12 15 17 19 22 25 28 30 35 40 45

84 95 100 112 125 150 157 170 190 212 228

23 27 27 32 35 45 45 47 60 70 70

4 5 5 5 5 6 7 7 7 9 7

 8 10 10 12 15 16 16 18 22 26 27

24 31 38 46 47 61 56 68 73 80 94

0.26 0.42 0.48 0.61 0.95 1.33 1.67 1.96 2.43 4.32 3.67

7 8 9 10 11 12

e

b

13 14 15 59

16

Wire Rope Clips

Applications Wire rope clips are used on wire rope eye-loop connections or complete loops, end-to-end connections where socketing or splicing is not feasible or when a temporary joint is required.

Range Van Beest offers a wide range of wire rope clips, specifically standardized models such as EN13411-5, US Federal Specification wire rope clips and DIN wire rope clips.

Design The Green Pin® wire rope clips are drop forged and have a bridge with grooves to fasten the wire rope properly in the clip; the DIN wire rope clips have a malleable base, without grooves.

Finish The finish is either electro-galvanized or hot dipped galvanized, unless otherwise specified.

1

Certification

2

Upon request, all wire rope clips can be supplied with a works certificate.

3

Instructions for use

4

Wire rope clips should be inspected before use to ensure that:

5

• all markings are legible; • the wire rope clip is free from nicks, gouges and cracks; • a wire rope clip with the correct dimension has been selected; • never repair or reshape a wire rope clip by welding, heating or bending as this may affect the performance.

6

The wire rope clip should be fitted to the wire rope as shown in the figures. The bridge of the wire rope clip should always be placed on the load bearing part of the rope. The U-bolt of the clip should be placed on the rope tail, also known as the dead end of the rope.

7

Turn back enough wire rope length so that the required minimum number of clips can be installed according to the instructions below.

8

The first clip must be placed one bridge width from the turned back rope tail or dead end of the rope, according to figure 1. Tighten the nuts to the specified torque.

9 10 11 12

Figure 1

13 14 15 16

60

Figure 2

Wire Rope Clips

The second clip must be placed immediately against the thimble but nevertheless in such a position that the correct tightening of the clip does not damage the outer wires of the wire rope (figure 2). Tighten the nuts firmly but not yet to the specified torque.

The following clips should be placed on the wire rope between the first and second clip in such a way that they are separated by at least 1½ times the clip-width with a maximum of 3 times the clip-width, according to figure 3.

1 2

Figure 3 Apply light tension on the rope and tighten all nuts evenly, alternating until reaching the specified torque.

3

During assembly and before the rope is taken into service, the nuts must be tightened once again to the prescribed torque. After the load is applied for the first time, the torque value must be checked again and corrected if necessary. Periodically re-tightening of the nuts must be done at 10.000 cycles (heavy usage), 20.000 cycles (moderate usage) or 50.000 cycles (light usage). If cycles are unknown, a fixed time period could be used, e.g. every 3 months, 6 months, annually. The torque values and the minimum number of clips to be applied, in relation to the rope size, are given in the following tables. diameter wire rope inch

diameter wire rope mm

min. no of clips required

/8 /16 1 /4 5 /16 3 /8 7 /16 1 /2 9 /16 5 /8 3 /4 7 /8

 3-4  5  6-7  8   9 - 10 11 - 12 13 14 - 15 16 18 - 20 22 24 - 25 28 - 30 32 - 34 36 38 - 40 41 - 42 44 - 46 48 - 52 56 - 58 62 - 65 68 - 72 75 - 78

 2  2  2  3  3  3  3  3  3  4  4  5  6  7  7  8  8  8  8  8  9 10 10

1 3

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 2 2 1/4 2 1/2 2 3/4 3

length of rope to turn back

torque value

torque value

mm

Nm

Ft.Lbs

  85   95  120  133  165  178  292  305  305  460  480  660  860 1120 1120 1370 1470 1550 1800 1850 2130 2540 2690

6.1 10.2 20.3 40.7 61 88 88 129 129 176 305 305 305 488 488 488 583 800 1017 1017 1017 1017 1627

4 5 6 7

4.5 7.5 15 30 45 65 65 95 95 130 225 225 225 360 360 360 430 590 750 750 750 750 1200

8 9 10 11 12 13 14

Table 1, Green Pin wire rope clips generally to EN 13411-5 Type B, required number and torque value ®

15 61

16

Wire Rope Clips

diameter wire rope mm

5 6.5 8 10 12 13 14 16 19 22 26 30 34 40

min. no of clips required

3 3 4 4 4 4 4 4 5 5 5 6 6 6

torque value

torque value

Nm

Ft.Lbs

2 3.5 6 9 20 33 33 49 68 107 147 212 296 363

1.5 2.6 4.4 6.6 14.8 24.3 24.3 36 50 79 108 156 218 268

Table 2, Wire rope clips generally to EN 13411-5 Type A, required number and torque value

The efficiency of a wire rope termination made with wire rope clips will depend on the correct placement on the ropes and on the care and skill of the fitting and tightening of the clips. With inadequately tightened nuts or with an insufficient number of wire rope clips the rope end may slide through the clips at a very early stage in loading.

1

A number of factors can adversely affect the tightness of the clips on ropes, such as: - the nut may be tight on the thread, yet not tight against the bridge; - contamination of the thread by dirt, oil or corrosion products, which may prevent the correct tightening of the nut.

2

Forged wire rope clips provide greater bearing surface and more consistent strength than malleable cast iron clips.

3

Suitable use of wire rope clips to EN13411-5 standards include suspending static loads and single use lifting operations which have been assessed by a competent person taking into account appropriate safety factors.

4

Wire rope clips should not be used on the following applications: • hoist ropes in mines; • rope drives for cranes in steel works and rolling mills; • permanent fastening of ropes in other rope drives; • rope terminations for load suspension devices in the operation of lifting appliances except in the case of lifting tackles where these are produced for a special application and are not re-used.

5 6

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the products are used in severe operating conditions.

7 8 9 10 11 12 13 14 15 16

62

generally to EN 13411-5 Type B

G-6240

• • • •

Material Standard Finish Certification

diameter wire rope

: Bridge : drop forged high tensile steel SAE 1045 U-bolt : SAE 1015 : EN 13411-5 Type B Formerly U.S. Federal Specification FF-C-450D : hot dipped galvanized nuts for diameter bow 5 and 6 mm are electro-galvanized : a works certificate can be supplied upon request

diameter

length bow

width inside

length thread

length base

thickness base

height base

weight per 100 pcs

inch

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

/8 3 /16 1 /4 5 /16 3 /8 7 /16 1 /2 9 /16 5 /8 3 /4 7 /8

 4  5  7  8 10 11 13 15 16 20 22 26 30 34 36 40 42 46 52 58 65 72 78

 5  6  8 10 11 12 13 14 14 16 19 19 19 22 22 22 25 29 32 32 32 32 38

 24  31  34  45  49  60  61  72  74  86  98 108 117 130 140 147 161 174 195 213 227 243 271

 12  15  19  22  26  30  30  33  33  38  45  48  51  59  60  66  70  78  86  98 105 112 121

11 13 13 19 19 25 25 32 32 37 41 46 51 54 59 60 67 70 78 81 87 91 98

 24  29  37  43  49  58  58  63  64  72  80  88  91 105 108 112 121 134 150 162 168 174 194

 21  24  30  33  42  46  48  52  54  57  62  67  73  79  79  85  92  97 113 116 119 127 135

 10  13  18  19  25  26  31  31  36  38  40  47  48  56  58  64  67  76  85 100 113 124 136

  2   4   8   14   19   31   34   36   45   68  108  113  140  207  234  266  329  441  603  707  806 1000 1440

1

1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 2 2 1/4 2 1/2 2 3/4 3

Wire Rope Clips

Green Pin® wire rope clips

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 63

16

Wire Rope Clips

Wire rope clips

generally to EN 13411-5 Type A

• • • • E-6260

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

64

Material

: Bridge : malleable steel U-bolt : mild steel : EN 13411-5 Type A Formerly DIN 1142 : electro-galvanized : a works certificate can be supplied upon request

Standard Finish Certification diameter wire rope

diameter

length bow

width inside

length thread

length base

thickness base

height base

weight per 100 pcs

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

5 6.5 8 10 12 13 14 16 19 22 26 30 34 40

 5  6  8  8 10 12 12 14 14 16 20 20 22 24

 25  32  41  46  56  64  66  76  83  96 111 127 141 159

12 14 18 20 24 29 28 34 37 41 46 54 60 68

14 17 20 24 28 29 31 35 36 40 50 55 60 65

 25  30  39  40  50  55  59  64  68  74  84  95 105 117

13 16 20 20 25 28 30 32 33 34 38 41 45 49

13 14 18 21 24 29 28 35 40 44 51 59 67 77

2 4 8.2 9.2 21.5 27.5 39.5 43 49 68 117 140 213 268

Wire Rope Clips

Wire rope clips

generally to DIN 741

• • • • E-6220

Material

: Bridge : casted U-bolt : mild steel : formerly DIN 741 : electro-galvanized : a works certificate can be supplied upon request

Standard Finish Certification diameter wire rope

diameter

length bow

width inside

length thread

length base

thickness base

height base

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

 3  5  6  8 10 11 13 14 16 19 22 26 30 34 40 45 50

 4  5  5  6  8  8 10 10 12 12 14 14 16 16 16 18 20

 20  24  28  34  42  44  55  57  63  75  85  95 110 120 140 163 170

 9 11 13 16 19 20 24 25 29 32 37 41 48 52 58 65 72

12 13 15 19 22 22 30 30 33 38 44 45 50 55 60 75 77

 21  23  26  30  34  36  42  44  50  54  61  65  74  80  88  97 106

10 11 12 14 18 19 23 23 26 29 33 35 37 42 45 49 51

10 10 11 15 17 18 21 22 26 30 34 37 43 50 55 60 65

weight per 100 pcs kg

1.4 1.5 2.1 4.1 6.8 7.2 13 13.5 21 28 40 44 66 75 104 134 175

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 65

16

Sleeves

Applications Sleeves are used for Flemish Eye wire rope slings. They are available in two types and a large number of sizes.

Range Van Beest offers a wide range of sleeves, in both aluminium and carbon steel.

Design Aluminium wire rope sleeves are manufactured according to DIN 3093 A. For safety in fabrication and application our sleeves are of seamless construction corresponding with the requirements of DIN 3093 A regarding material composition and mechanical properties. Prescon carbon steel sleeves are manufactured from carbon steel and feature the Swaging Verification System in which the colour changes intensity after swaging. This system helps the sling manufacturer to determine whether or not the sleeve has been pressed. The sleeves are of seamless construction and fit industry standard dies.

Finish

1

Aluminium sleeves are self coloured. The smaller dimensions of Prescon sleeves, up to and including 16 mm, are colour coded, larger dimensions are self coloured.

2

Certification

3

Upon request, all sleeves can be supplied with a works certificate.

4

Instructions for use

5

Aluminium sleeves, please refer to EN13411-3 Prescon sleeves are suitable for: - 6 x 19 and 6 x 37 IWRC right regular lay EIPS steel wire rope - 6 x 19 and 6 x 37 FC IPS right regular lay steel wire rope

6

A Flemish Eye is made the following way: A carbon steel sleeve is placed on the steel wire rope after its required length is set. Then the Flemish Eye is spliced in the rope. The sleeve is pushed over the splice and then swaged. Multiple progressive pressings are required to prevent flash, which will develop into a permanent mark or possibly a crack in the sleeve. A light oil lubricant should be applied to each die and cleaned after the swaging operation to stimulate effective colour change. Colour change is not an indication for proper swaging, only an indication that the sleeve has been pressed. Proper swaging practices are the sling manufacturer’s responsibility. Regular inspection of swaging machine, dies etc. must be conducted to ensure that the equipment continues to meet required standards.

7 8 9 10 11 12 13 14 15 16

66

Sleeves

Prescon sleeves for wire rope

• Material • Finish diameter wire rope mm

S-6500

  6   8  10  11  13  14  16  19  22  25  28  32  34 - 35  37 - 38  44 - 45  50 - 52  56 - 57  62 - 64  68 - 70  75 - 76  87 - 89  93 - 95 100 -102 112 -114

: special carbon steel : up to and including size 16 mm colour coded sizes above 16 mm self coloured length

diameter outside

diameter inside

diameter inside

length

a mm

b mm

c mm

d mm

e mm

25.4 38.1 38.1 51 51 70 70 81 90 102 122 132 148 159 184 216 243 267 292 305 356 381 406 457

16.7 23 23 31 31 37 37 43.6 51.6 58 64 71 76 83 102 111 128 140 146 152 178 191 206 232

8.3 11.1 11.9 14.3 15.9 17.5 19.1 23.4 26.2 29.4 32.5 36.5 39.7 42.9 49.2 57 64 70 76 83 98 103 111 124

11.9 15.5 16.7 21.4 23 26.2 27.8 32.5 38.9 43.7 49.2 55 60 66.7 79 92 102 114 121 127 148 160 173 194

7.1 11.1 11.1 15.1 15.1 17.9 17.9 21.8 25.4 28.6 31.8 35.7 39.7 42.9 50 57 64 71 79 86 100 108 114 129

diameter outside pressed

weight per 100 pcs

mm

kg

12.7 18.5 18.5 24.9 24.9 30.5 30.5 35.8 41.4 47.8 53 58 62 67 77 89 103 113 118 124 145 156 180 187

2.15 4.03 5.44 11.3 13.2 19.5 25.9 39.9 62 88 118 154 195 227 367 510 862 1043 1270 1334 2105 2495 3130 4536

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 67

16

Sleeves

Aluminium sleeves for wire rope

• Material • Standard • Finish diameter wire rope

diameter

width

thickness

length

mm

a mm

b mm

c mm

d mm

1 1.5 2 2.5 3 3.5 4 4.5 5 6 6.5 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60

1.2 1.7 2.2 2.7 3.3 3.8 4.4 4.9 5.5 6.6 7.2 7.8 8.8 9.9 10.9 12.1 13.2 14.2 15.3 17.5 19.6 21.7 24.3 26.4 28.5 31 33.1 35.2 37.8 39.8 41.9 44 46.2 48.4 50.6 52.8 55 57.2 59.4 61.6 63.8 66

2.4 3.4 4.4 5.4 6.6 7.6 8.8 9.8 11 13.2 14.4 15.6 17.6 19.8 21.8 24.2 26.4 28.4 30.6 35 39.2 43.4 48.6 52.8 57 62 66.2 70.4 75.6 79.6 83.8 88 92.4 96.8 101.2 105.6 110 114.4 118.8 123.2 127.6 132

A-6550

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

68

: aluminium : EN 13411-3 formerly DIN 3093 A : self coloured

0.65 0.75 0.85 1.05 1.25 1.5 1.7 1.9 2.1 2.5 2.7 2.9 3.3 3.7 4.1 4.5 4.9 5.4 5.8 6.7 7.6 8.4 9.2 10 10.9 11.7 12.5 13.4 14.2 15 15.8 16.6 17.5 18.3 19.2 20 20.8 21.6 22.5 23.3 24.2 25

5 6 7 9 11 13 14 16 18 21 23 25 28 32 35 39 42 46 49 56 63 70 77 84 91 98 105 112 119 126 133 140 147 154 161 168 175 182 189 196 203 210

weight per 1000 pcs kg

0.1 0.21 0.24 0.5 0.84 1.32 1.81 2.61 3.57 5.86 7.55 9.53 13.7 19.8 26.4 35.8 45.8 59.7 73.5 111 159 217 292 376 481 603 739 897 1080 1275 1490 1734 2020 2314 2557 3010 3400 3813 4120 4772 5200 5880

Sleeves 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 69

16

Sockets

Applications Sockets are used to attach steel wire rope to a fixed point to which the socket is to be connected. This can be as an anchoring system for tubes or pipes, anchor wires of dredging material, anchor cables of oil platforms, towing cables or for fastening cables in construction purposes such as bridges, roof construction etc. Sockets are the strongest steel wire rope end fitting and if they are assembled in the proper way they can meet at least the breaking strength of the steel wire rope. In the past melted zinc was poured into the sockets to attach the steel wire rope; nowadays suitable resins have been developed for this purpose.

Range Van Beest offers a wide range of sockets, i.e.: • Closed spelter sockets; • Open spelter sockets; • Open wedge sockets; • Short bow sockets; • Open swage sockets; • Closed swage sockets.

Design Green Pin® open and closed spelter sockets and open wedge sockets are made from cast high tensile steel. These sockets carry the following markings:

1

-

2 3

socket number; diameter wire rope in mm and inches; manufacturer’s symbol; batch number; CE conformity code.

With shortbow sockets you save money in replacement costs by eliminating costly downtime.

4

Swage sockets are drop forged from special bar quality carbon steel C-1035 and spheroidized annealed to be suitable for cold swaging.

5

Finish

6

Green Pin® open and closed spelter sockets and open wedge sockets are galvanized. Swage sockets are self coloured.

7

Certification

8

Upon request, Green Pin® open and closed spelter sockets, open wedge and shortbow sockets can be supplied with a works certificate, a proof load test certificate and EC Declaration of Conformity to the Machine Directive 2006/42/EC. All sockets are marked with the batch number which refers to the supplied certificate. Swage sockets can be supplied with a works certificate.

9

Instructions for use

10

1) Open spelter sockets – closed spelter sockets

11 12 13 14 Figure 1

15 16

- brooming is done after the wire rope has been placed into the socket - when using resins always exactly follow the instructions given by the manufacturer of the resins - socketing is only to be carried out by specialists from a certified sling shop

70

The wedge and body act as a vice which grips the wire rope and locks it in place. Green Pin® wedge sockets may be used within the range of wire rope diameters as shown in the table further on in the catalogue.

Sockets

2) Open wedge sockets

Figure 2 When using open wedge sockets the following precautions should be taken: • before use always inspect the socket, the wedge and the pin • use only with standard 6-8 strand wire rope • always be sure that socket and wedge have the correct size for the wire rope diameter • the loaded part of the steel wire rope should be mounted in the centre line of the pin • when installing the wire rope, always pre-load the wedge with the wire rope in place • never weld the tail on standard wire rope; the tail should have a length of at least 6 times the wire rope diameter with a minimum of 150 mm, secure the dead end of the rope with a wire rope clip as shown in figure 3 • before applying the first load always use a hammer to seat the wedge and rope as deep as possible into the socket • check the assembly regularly to re-tighten or re-position if necessary • never side load the wedge socket as it has not been designed for that purpose • load may slip if the connection is not properly installed • the efficiency of a wire rope - wedge socket connection is 80% of the minimum breaking load of the wire but limited to the minimum breaking load of the socket • only use the original wedge supplied by the manufacturer of the socket and be sure it is suitable for the diameter of the rope used • never use a wedge from any other supplier than the original socket supplier as the dimensions will not match

1 2 3 4 5 6 7 8 9 10

RIGHT

RIGHT

WRONG

11

WRONG

Figure 3

12 13 14 15 71

16

Sockets

3) Swage sockets

Open swage socket

Closed swage socket

Figure 4

1

swage sockets are recommended for use on 6 x 19 or 6 x 37 IWRC regular lay ropes mark the rope to indicate the proper length of rope to be inserted into the socket (figure 5) insert the rope into the socket and swage the socket with the specified dies (figure 5) all slings terminated with swage sockets must be proof loaded always swage under supervision of a specialist from a certified sling shop

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the sockets are used in severe operating conditions.

2 3 4 5

Step 1. Mark rope to indicate proper amount to insert into socket.

6 7 8 Step 2. Insert rope into socket.

9 10 11

Step 3. Swage the socket.

12

Figure 5

13 14 15 16

72

Sockets

Green Pin® sockets closed spelter socket • • • •

Material : high tensile steel Finish : hot dipped galvanized Temperature Range : -20°C up to +200°C Certification : a works certificate, proof load test certificate and EC Declaration of Conformity can be supplied upon request number

load

diameter wire rope

t

mm

minimum breaking

G-6411

296 297 298 299 200 201 204 207 212 215 217 219 222 224 226 227 228 229 230 231 233 240

   8   12   20   25   40   55   75   90  125  150  170  225  280  360  425  460  560  625  720  875 1200 1300

  6 -   7   8 -  10   11 -   13   14 -   16   18 -   19   20 -   22   23 -   26   27 -   30   31 -   36   37 -   39   40 -   42   43 -   48   49 -   54   55 -   60   61 -   68   69 -   75   76 -   80   81 -   86   87 -   93   94 - 102 108 - 115 120 - 130

length

width

length inside bow d mm

thickness bow

thickness bow

opening

b mm

width inside bow c mm

a mm

 101  119  140  162  194  224  253  282  312  358  390  443  502  548  597  644  686  743  788  845 1000 1150

weight each

e mm

f mm

g mm

kg

 37  43  52  68  76  92 104 114 127 136 146 171 193 216 241 273 292 311 330 362 405 450

 22  25  30  37  42  47  57  63  70  79  83  93 100 112 140 159 171 184 197 216 235 260

 40  48  58  66  78  90 103 116 130 155 171 198 224 247 270 286 298 311 330 356 425 525

 11  14  18  21  27  33  36  39  43  51  54  55  62  73  79  79  83 102 102 108 125 125

13 17.5 23.4 26 32 38 44 51 57 63 70 76 82 92 102 124 133 146 159 178 190 200

  8.5 12 14.8 17.6 21.5 24 28 32 38 41 44 51 57 63 73 79 86 92 99 108 125 143

0.3 0.5 0.7 1.5 2.1 3.6 5.8 7 10.5 13 17 26 37.5 50 65 94 115 145 168 210 330 500

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

73

16

Sockets

Green Pin® sockets open spelter socket

• Material : high tensile steel • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : a works certificate, proof load test certificate and EC Declaration of Conformity can be supplied upon request number

G-6412

1 2

f

3 4 5 6 7 8 9 10 11 12 13 14 15 16

74

196 197 198 199 100 104 108 111 115 118 120 125 128 130 132 135 138 140 142 144 146 150

minimum breaking load

diameter wire rope

t

mm

   8    12   20   25   40   55   75   90  125  150  170  225  280  360  425  460  560  625  720  875 1200 1300

  6 -   7   8 -  10   11 -   13   14 -   16   18 -   19   20 -   22   23 -   26   27 -   30   31 -   36   37 -   39   40 -   42   43 -   48   49 -   54   55 -   60   61 -   68   69 -   75   76 -   80   81 -   86   87 -   93   94 - 102 108 - 115 120 - 130

length

width

width inside

length inside

opening

c mm

diameter pin d mm

a mm

b mm

 109  124  143  172  205  235  275  306  338  394  418  468  552  598  654  696  737  788  852  914 1160 1250

 51  63  67  85  98 111 132 144 155 180 187 213 240 270 303 349 371 391 411 447 489 525

weight each

e mm

f mm

kg

 19  21  26  33  38  44  51  57  63  76  76  89 101 113 127 133 146 159 171 191 206 225

 16  21  25  30  35  41  51  57  63  70  76  89  95 108 121 127 133 140 152 178 193 220

 30  34  37  49  58  68  75  85  95 127 127 133 180 196 212 215 219 228 242 254 367 390

8.5 12 15 18 21 24 28 32 38 41 44 51 57 63 73 79 86 92 99 108 125 143

0.4 0.8 1 1.8 3 4.6 8 11 16 23 27 41 58 85 125 155 173 230 265 370 525 735

Sockets

Green Pin® sockets

open spelter socket with safety bolt • Material : high tensile steel • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : a works certificate, proof load test certificate and EC Declaration of Conformity can be supplied upon request number

G-6422

196 197 198 199 100 104 108 111 115 118 120

minimum breaking load

diameter wire rope

length

width

width inside

t

  8  12  20  25  40  55  75  90 125 150 170

length inside

opening

c mm

diameter pin d mm

mm

a mm

b mm

e mm

f mm

 6- 7   8 - 10 11 - 13 14 - 16 18 - 19 20 - 22 23 - 26 27 - 30 31 - 36 37 - 39 40 - 42

109 124 143 172 205 235 275 306 338 394 418

 62  75 109 133 145 161 189 208 226 246 256

19 21 26 33 38 44 51 57 63 76 76

16 21 25 30 35 41 50 57 63 70 77

 30  34  37  49  58  68  75  85  95 127 127

  8.5 12 15 18 21 24 28 32 38 41 44

weight each

kg

0.4 0.8 1 1.8 3 4.6 8 11 16 23 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 75

16

Sockets

Green Pin® sockets open wedge socket

• Material : high tensile steel • Standard : generally to EN 13411-6 • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : a works certificate, proof load test certificate and EC Declaration of Conformity can be supplied upon request number

G-6413

0.25 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

76

minimum breaking load

diameter wire rope

t

mm

  8  12  20  25  40  55  75  90 110 125 150 170 225 280 360 425 460 625

 7- 8   9 - 10 11 - 13 14 - 16 18 - 19 20 - 22 24 - 26 27 - 29 30 - 32 34 - 36 37 - 39 40 - 42 43 - 48 49 - 52 54 - 58 60 - 68 72 - 76 81 - 86

length

length to center pin

width

width inside

diameter pin

diameter eye

weight each

e mm

thickness side plates f mm

a mm

b mm

c mm

d mm

g mm

 128  165  175  211  252  288  329  375  423  474  527  580  650  745  785  970 1150 1252

 110  142  146  176  212  240  274  310  350  400  450  500  550  640  660  835 1000 1100

 51  62  66  82  95 110 130 145 155 163 178 187 226 257 275 300 355 375

 18  20  25  31  38  44  51  57  63  69  76  76  89 101 114 127 146 159

kg

16  21  25  30  35  41  51  57  64  64  70  76  89  95 108 121 133 140

 9 11 12 15 16 19 22 25 28 28 30 33 39 46 54 60 76 79

 36  46  57 70 80 95 110 130 146 148 153 160 186 194 230 250 270 300

0.8 1.5 2.4 4 7 11 16 21 30 37 51 64 96 130 180 275 440 510

Sockets

Green Pin® sockets

open wedge socket with safety bolt • Material : high tensile steel • Standard : generally to EN 13411-6 • Finish : hot dipped galvanized • Temperature Range : -20°C up to +200°C • Certification : a works certificate, proof load test certificate and EC Declaration of Conformity can be supplied upon request number

G-6423

0.25 0.5 1 2 3 4 5 6 7 8 9 10

minimum breaking load

diameter wire rope

length

length to center pin

width

width inside

diameter pin

t

 8  12  20  25  40  55  75  90 110 125 150 170

diameter eye

weight each

e mm

thickness side plates f mm

mm

a mm

b mm

c mm

d mm

g mm

 7- 8   9 - 10 11 - 13 14 - 16 18 - 19 20 - 22 24 - 26 27 - 29 30 - 32 34 - 36 37 - 39 40 - 42

128 165 175 211 252 288 329 375 423 474 527 580

110 142 146 176 212 240 274 310 350 400 450 500

 76  91 109 133 145 161 189 208 226 233 246 256

18 20 25 31 38 44 51 57 63 69 76 76

kg

16 20 25 30 35 41 50 57 63 65 70 77

 9 11 12 15 16 19 22 25 28 28 30 33

 36  46  57  70  80  95 110 130 146 148 153 160

0.8  1.5  2.4  4  7 11 16 21 30 37 51 64

1 2 3 4 5 6

Short bow sockets

7

closed spelter socket • Material • Finish • Certification

G-6416

diameter wire rope

8

: alloy steel : hot dipped galvanized : a works certificate and a proof load test certificate can be supplied upon request length

width

thickness bow

width

length eye

width eye

thickness

inch

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

1 1/4 - 1 3/8 1 1/2 - 1 5/8 1 3/4 - 1 7/8 2 - 2 1/8 2 1/4 - 2 3/8 2 1/2 - 2 5/8 2 3/4 - 2 7/8 3 - 3 1/8 3 1/4 - 3 3/8 3 1/2 - 3 5/8 3 3/4 - 3 7/8 4 - 4 1/4

246 305 356 391 438 457 540 584 626 670 698 803

122 152 178 202 221 264 273 295 319 340 356 412

 38  40  47  53  61  68  74  76  82  92  98 112

 48  57  66  76  80  96 105 115 121 127 133 152

 83 104 121 133 146 165 178 194 216 219 235 270

 76  92 112 121 133 149 163 174 194 202 214 242

 97 123 140 158 184 217 222 243 260 270 290 318

 18  22  28  32  44  56  68 100 120 145 190 250

9

weight each

10 11 12 13 14 15 77

16

Sockets

Green Pin® swage sockets open type

• Material • Finish diameter diameter rope before swage a mm mm

S-6414

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

78

 6  8 10 11 13 14 16 19 22 25 29 32 35 38 44 51 57 63 76

 13  20  20  25  25  32  32  39  43  50  57  64  71  78  86 100 113 125 151

: drop forged steel C-1035 : self coloured diameter after swage min max a a mm mm

 10.9  17.2  17.2  22.0  22.0  28.3  28.3  34.7  37.8  44.2  50.5  56.8  63.2  69.6  75.9  88.6 100.3 110.5 113.1

 11.7  18.0  18.0  23.1  23.1  29.5  29.5  36.1  39.4  45.7  52.1  58.4  65.0  71.4  77.7  90.4 102.1 112.3 134.9

diameter diameter inside pin

length

length

length

length thickness

width inside

width eye

weight each

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

kg

 7  9 12 12 14 15 17 20 24 27 30 34 37 40 47 54 60 67 80

 17  21  21  25  25  30  30  35  41  51  57  64  64  70  89  95 108 108 133

 38  44  44  51  51  57  57  70  83  95 108 121 133 146 171 203 171 171 219

 121  159  159  198  198  243  243  297  346  397  444  494  540  591  689  798  835  879 1045

 54  81  81 108 108 135 135 162 189 216 243 270 297 324 378 432 486 498 603

102 135 135 169 169 206 206 254 295 340 381 419 460 502 584 679 705 749 905

 8 10 10 13 13 16 16 19 23 26 30 30 33 37 43 46 65 65 76

 17  21  21  25  25  32  32  38  44  51  57  63  63  76  89 102 114 114 146

 35  41  41  51  51  63  63  76  86 102 114 127 133 146 178 203 222 222 241

0.25 0.50 0.49 1.04 1.02 2.09 2.04 3.54 5.31 8.07 13.5 16.3 21.3 29.5 42.2 65.8 93.4 103 181

Sockets

Green Pin® swage sockets closed type

• Material • Finish diameter rope

S-6415

: drop forged steel C-1035 : self coloured

mm

diameter before swage a mm

 6  8 10 11 13 14 16 19 22 25 29 32 35 38 44 51 57 63 76

 13  20  20  25  25  32  32  39  43  50  57  64  71  78  86 100 113 125 151

diameter after swage min max a a mm mm

 10.9  17.2  17.2  22.0  22.0  28.3  28.3  34.7  37.8  44.2  50.5  56.8  63.2  69.6  75.9  88.6 100.3 110.5 113.1

 11.7  18.0  18.0  23.1  23.1  29.5  29.5  36.1  39.4  45.7  52.1  58.4  65.0  71.4  77.7  90.4 102.1 112.3 134.9

diameter inside

diameter

diameter eye

thickness

length

length

length

weight each

b mm

c mm

d mm

e mm

f mm

g mm

h mm

kg

 7  9 12 12 14 15 17 20 24 27 30 34 37 40 47 54 60 67 80

 37  43  43  51  51  63  63  76  89 102 114 127 133 140 171 197 219 219 235

 19  22  22  27  27  32  32  37  43  52  59  65  65  71  91  97 110 110 135

 13  17  17  22  22  29  29  33  38  44  51  57  57  63  76  83 102 102 137

 54  81  81 108 108 135 135 162 189 216 243 270 297 324 378 432 486 498 603

111 140 140 176 176 222 222 264 308 349 387 438 479 518 610 698 756 791 959

 89 114 114 146 146 184 184 219 257 292 324 365 400 432 508 584 632 667 816

0.15 0.36 0.35 0.66 0.63 1.26 1.25 2.27 3.40 5.08 7.17 10.4 14.1 17.7 23.6 40.8 55.3 64.4 114

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

79

16

Turnbuckles

Applications Turnbuckles are normally used for rigging or tensioning of wires, ropes, rods etc. Turnbuckles are designed for straight or in-line rigging, tensioning or lashing only.

Range Van Beest offers a wide range of turnbuckles, i.e.: • Load rated Green Pin® turnbuckles; • Open body rigging screws generally to DIN 1480; • Rigging screws with welding ends; • Closed body rigging screws; • Special turnbuckles for lashing (hamburgers).

Design Green Pin® turnbuckles are manufactured to ASTM F1145-92, formerly U.S. Fed. Spec. FF-T-791, and have a safety factor of 5 to 1. The Green Pin® turnbuckles are drop forged. Turnbuckles can be equipped with the following end fittings: eye/eye, hook/hook, hook/eye, jaw/jaw and jaw/eye. All parts are interchangeable, locking nuts are supplied with all sizes. Rigging screws generally to DIN 1480 are available with welding ends and in hook/eye, eye/eye, hook/hook and jaw/jaw combinations.

1

Closed body rigging screws are available in jaw/jaw, jaw/eye and eye/eye combinations.

2

Finish

3

Load rated Green Pin® turnbuckles and closed body rigging screws are hot dipped galvanized. Rigging screws according to DIN 1480 are electro-galvanized whereas lashing turnbuckles are self coloured or can be painted upon request.

4

Certification

5

Upon request, Green Pin® turnbuckles can be supplied with a works certificate and a proof load test certificate.

6

Instructions for use Turnbuckles must be used for straight or in-line pulling only. Special attention should be paid to prevent overloading. While tensioning, the forces on the turnbuckle must not be such that any deformation occurs. In case of deformation, the tension should be decreased immediately and deformed parts should be replaced. Extreme circumstances or shock loading, if applicable, must be taken into account when selecting the correct products to be used for the application.

7 8

For the rigging of wires, ropes, rods etc., Green Pin® turnbuckles are recommended to be used. The Working Load Limit (WLL) should be applied in a straight pull only and overloading is not permitted. Nor should side loads be applied, as the products have not been designed for this purpose.

9 10

Open body rigging screws are used for tensioning wires and ropes for minor loads (i.e. rope railings). It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the steel structure.

11 12 13 14 15 16

80

Turnbuckles should be inspected before use to insure that: -

the the the the

threads of the body and the end fittings are of the same type; threads of the body and the end fittings are undamaged; body and end fittings are not distorted or unduly worn; body and end fittings are free from nicks, gouges and cracks.

Furthermore, it must be ensured that the end fittings are correctly screwed into the body. Always use the locking nuts supplied to prevent the turnbuckles from unscrewing. Never replace an end fitting, other than the one designed for the purpose, as it may not be suitable for the loads imposed.

Turnbuckles

Safe use of turnbuckles

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 81

16

Turnbuckles

Green Pin® turnbuckles Jaw - Jaw with cotter pin generally to ASTM F1145-92

• Material : drop forged high tensile steel SAE 1035 or 1045 • Safety factor : MBL equals 5 x WLL • Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b • Finish : hot dipped galvanized • Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request working load limit t

G-6313

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

82

2.36 2.36 2.36 2.36 3.27 3.27 4.54 4.54 4.54 4.54 6.9 6.9 6.9 9.71 9.71 9.71 12.7 12.7 16.8 27.2 34

diameter thread

take up

a inch

/4 3 /4 3 /4 3 /4 7 /8 7 /8 3

1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 2 2 1/2 2 3/4

length open position c mm

length closed position d mm

opening jaw

length inside

diameter pin

thickness jaw eye

diameter jaw eye

inch

length closed position b mm

e mm

f mm

g mm

h mm

i mm

kg

6 9 12 18 12 18 6 12 18 24 12 18 24 12 18 24 18 24 24 24 24

 368  442  518  671  559  712  447  598  750  902  641  793  961  675  825  980  933 1084 1153 1254 1305

 487  639  791 1095  825 1131  555  859 1164 1469  916 1218 1538  941 1244 1550 1310 1614 1672 1830 1878

 438  512  588  740  636  789  532  683  835  987  748  900 1069  806  956 1111 1095 1246 1338 1479 1561

24 24 24 24 27 27 30 30 30 30 44 44 44 52 52 52 59 59 63 75 90

 38  38  38  38  42  42  50  50  50  50  71  71  71  71  71  71  86  86  93 114 110

16 16 16 16 19 19 20 20 20 20 26 26 26 28 28 28 33 33 41 41 41

 41  41  41  41  48  48  55  55  55  55  68  68  68  80  80  80  90  90 108 143 158

2.68 3.03 3.29 3.65 4.90 5.95 5.21 6.96 8.4 8.9 11.9 13.6 14.2 16.9 19.3 20.7 25 28.7 45.4 88 98

 16 16 16 16 19 19 22 22 22 22 29 29 29 35 35 35 42 42 51 57 70

weight each

Turnbuckles

Green Pin® turnbuckles Jaw - Jaw with safety bolt generally to ASTM F1145-92

• Material : drop forged high tensile steel SAE 1035 or 1045 • Safety factor : MBL equals 5 x WLL • Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b • Finish : hot dipped galvanized • Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request working load limit t

G-6323

0.54 1 1 1 1.59 1.59 1.59 2.36 2.36 2.36 2.36 3.27 3.27 4.54 4.54 4.54 4.54 6.9 6.9 6.9 9.71 9.71 9.71 12.7 12.7 16.8 27.2 34

diameter thread

take up

a inch

/8 1 /2 1 /2 1 /2 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8 3

1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 2 2 1/2 2 3/4

length open position c mm

length closed position d mm

opening jaw

length inside

diameter pin

thickness jaw eye

diameter jaw eye

inch

length closed position b mm

e mm

f mm

g mm

h mm

i mm

kg

6 6 9 12 6 9 12 6 9 12 18 12 18 6 12 18 24 12 18 24 12 18 24 18 24 24 24 24

 273  305  380  455  346  421  496  368  442  518  671  559  712  447  598  750  902  641  793  961  675  825  980  933 1084 1153 1254 1305

 409  435  587  739  469  622  773  487  639  791 1095  825 1131  555  859 1164 1469  916 1218 1538  941 1244 1550 1310 1614 1672 1830 1878

 305  344  418  494  406  481  556  438  512  588  740  636  789  532  683  835  987  748  900 1069  806  956 1111 1095 1246 1338 1479 1561

12 16 16 16 18 18 18 24 24 24 24 27 27 30 30 30 30 44 44 44 52 52 52 59 59 63 75 90

 21  26  26  26  32  32  32  38  38  38  38  42  42  50  50  50  50  71  71  71  71  71  71  86  86  93 114 110

 9 11 11 11 14 14 14 16 16 16 16 19 19 20 20 20 20 26 26 26 28 28 28 33 33 41 41 41

 21  26  26  26  33  33  33  41  41  41  41  48  48  55  55  55  55  68  68  68  80  80  80  90  90 108 143 158

0.57 0.96 1.18 1.50 1.84 2.12 2.56 2.68 3.03 3.29 3.65 4.90 5.95 5.21 6.96 8.4 8.9 11.9 13.6 14.2 16.9 19.3 20.7 25 28.7 45.4 88 98

8 10 10 10 13 13 13 16 16 16 16 19 19 22 22 22 22 28 28 28 35 35 35 42 42 50 57 70

weight each

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

83

16

Turnbuckles

Green Pin® Polar turnbuckles Jaw - Jaw with safety bolt generally to ASTM F1145-92 • Material : drop forged alloy steel, Grade 8, quenched and tempered • Safety factor : MBL equals 5 x WLL • Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b • Finish : hot dipped galvanized • Temperature Range : -40°C up to +200°C • Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request working load limit t

G-6333

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

84

1 1.59 2.36 3.27 4.54 6.9 9.71 12.7

diameter thread

take up

a inch

/2 5 /8 3 /4 7 /8 1

1 1 1/4 1 1/2 1 3/4

length open position c mm

length closed position d mm

opening jaw

length inside

diameter pin

thickness jaw eye

diameter jaw eye

inch

length closed position b mm

weight each

e mm

f mm

g mm

h mm

i mm

kg

12 12 18 18 18 18 18 18

455 496 671 712 750 793 825 933

 739  773 1095 1131 1164 1218 1244 1310

 494  556  740  789  835  900  956 1095

16 18 24 27 30 44 52 59

26 32 38 42 50 71 71 86

10 13 16 19 22 29 35 42

11 14 16 19 20 26 28 33

26 33 41 48 55 68 80 90

1.50 2.56 3.65 5.95 8.4 13.6 19.3 25

Turnbuckles

Green Pin® turnbuckles Eye - Eye generally to ASTM F1145-92

• Material : drop forged high tensile steel SAE 1035 or 1045 • Safety factor : MBL equals 5 x WLL • Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b • Finish : hot dipped galvanized • Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request working load limit t

G-6311

0.54 1 1 1 1.59 1.59 1.59 2.36 2.36 2.36 2.36 3.27 3.27 4.54 4.54 4.54 4.54 6.9 6.9 6.9 9.71 9.71 9.71 12.7 12.7 16.8 27.2 34

diameter thread

take up

a inch

/8 1 /2 1 /2 1 /2 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8 3

1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 2 2 1/2 2 3/4

length open position c mm

length

diameter

width inside

length inside

inch

length closed position b mm

weight each

g mm

length closed position h mm

d mm

e mm

f mm

 6  6  9 12  6  9 12  6  9 12 18 12 18  6 12 18 24 12 18 24 12 18 24 18 24 24 24 24

 292  325  400  476  381  455  531  414  488  564  717  601  754  497  647  800  950  711  861 1014  756  916 1065 1019 1171 1264 1429 1503

 428  455  607  760  503  655  808  532  684  837 1142  869 1174  604  909 1214 1517  984 1286 1590 1023 1335 1635 1396 1701 1783 1965 2038

183 193 269 346 203 279 356 213 289 366 518 376 528 233 386 538 690 385 537 689 401 553 705 577 729 746 800 800

10 12 12 12 14 14 14 17 17 17 17 20 20 24 24 24 24 30 30 30 32 32 32 38 38 46 51 57

13 18 18 18 21 21 21 25 25 25 25 32 32 36 36 36 36 46 46 46 54 54 54 60 60 69 80 84

 29  36  36  36  44  44  44  54  54  54  54  61  61  75  75  75  75  90  90  90 105 105 105 119 119 147 165 178

 49  58  57  57  79  78  78  90  89  89  89 100 101 118 117 117 116 145 144 144 156 160 158 197 196 231 274 311

0.47 0.84 1.05 1.26 1.35 1.60 1.92 2.03 2.49 2.65 3.06 3.98 5.12 4.35 5.92 7.17 7.52 9.8 11.31 12.1 14.2 16.5 17.1 23.1 26.3 40.7 64 88

kg

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

85

16

Turnbuckles

Green Pin® turnbuckles Hook - Hook generally to ASTM F1145-92

• Material : drop forged high tensile steel SAE 1035 or 1045 • Safety factor : MBL equals 5 x WLL • Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b • Finish : hot dipped galvanized • Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request

working load limit t

G-6312

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

86

0.45 0.68 0.68 0.68 1.02 1.02 1.02 1.36 1.36 1.36 1.36 1.81 1.81 2.27 2.27 2.27 2.27 2.95 2.95 2.95 3.4 3.4 3.4

diameter thread

take up

a inch

/8 1 /2 1 /2 1 /2 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8 3

1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2

length open position c mm

thickness hook

thickness hook

opening hook

inch

length closed position b mm

weight each

f mm

length closed position g mm

d mm

e mm

 6  6  9 12  6  9 12  6  9 12 18 12 18  6 12 18 24 12 18 24 12 18 24

 280  311  385  461  357  432  508  393  467  543  695  580  733  479  625  778  928  683  835  987  763  910 1062

 415  440  592  745  480  632  785  511  663  816 1121  846 1152  586  886 1191 1495 952 1256 1560 1006 1305 1610

10 13 13 13 16 16 16 20 20 20 20 24 24 26 26 26 26 31 31 31 34 34 34

15 19 19 19 23 23 23 27 27 27 27 31 31 35 35 35 35 38 38 38 45 45 45

14 16 16 16 21 21 21 24 24 24 24 28 28 31 31 31 31 37 37 37 45 45 45

 43  51  50  50  67  67  67  79  78  78  78  90  90 109 106 106 105 131 131 130 160 157 157

0.36 0.62 0.85 1.04 0.98 1.18 1.71 1.53 1.88 2.3 2.85 3.33 4.24 3.87 5.09 6 7.52 8.12 10.4 12.1 12.7 15.1 17.1

kg

Turnbuckles

Green Pin® turnbuckles Eye - Jaw generally to ASTM F1145-92

• Material : drop forged high tensile steel SAE 1035 or 1045 • Safety factor : MBL equals 5 x WLL • Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b • Finish : hot dipped galvanized • Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request • Note : jaw ends up to and including 5/8” are fitted with bolts and nuts, sizes 3/4” and up are equipped with pins and cotters.

G-6315

i

working diameter load thread limit a t inch

take up

0.54 1 1 1 1.59 1.59 1.59 2.36 2.36 2.36 2.36 3.27 3.27 4.54 4.54 4.54 4.54 6.9 6.9 6.9 9.71 9.71 9.71 12.7 12.7 16.8 27.2 34

 6  6  9 12  6  9 12  6  9 12 18 12 18  6 12 18 24 12 18 24 12 18 24 18 24 24 24 24

/8 1 /2 1 /2 1 /2 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8 3

1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 2 2 1/2 2 3/4

inch

length length opening length diameter thickness diameter diameter width closed open jaw inside pin eye eye eye inside position position jaw jaw jaw jaw eye b c d e f g h i j mm mm mm mm mm mm mm mm mm

 283  315  389  465  363  438  514  391  465  541  694  580  733  472  623  775  926  676  832  988  716  871 1022  980 1131 1208 1341 1404

 418  445  597  749  486  638  790  509  661  814 1118  847 1152  579  884 1189 1493  949 1257 1564  982 1289 1593 1356 1661 1728 1866 1923

12 16 16 16 18 18 18 24 24 24 24 27 27 30 30 30 30 44 44 44 52 52 52 59 59 63 75 90

 21  26  26  26  32  32  32  38  38  38  38  42  42  50  50  50  50  71  71  71  71  71  71  86  86  93 114 110

 8 10 10 10 13 13 13 16 16 16 16 19 19 22 22 22 22 29 29 29 35 35 35 42 42 51 57 70

 9 11 11 11 14 14 14 16 16 16 16 19 19 20 20 20 20 26 26 26 28 28 28 33 33 41 41 41

 21  26  26  26  33  33  33  41  41  41  41  48  48  55  55  55  55  68  68  68  80  80  80  90  90 108 143 158

10 12 12 12 14 14 14 17 17 17 17 20 20 24 24 24 24 30 30 30 32 32 32 38 38 46 51 57

13 18 18 18 21 21 21 25 25 25 25 32 32 36 36 36 36 46 46 46 54 54 54 60 60 69 80 84

length inside eye k mm

 29  36  36  36  44  44  44  54  54  54  54  61  61  75  75  75  75  90  90  90 105 105 105 119 119 147 165 178

length weight closed each position l mm kg

 49  58  57  57  79  78  78  90  89  89  89 100 101 118 117 117 116 145 144 144 156 160 158 197 196 231 274 311

0.51 0.89 1.10 1.31 1.58 1.84 2.22 2.34 2.72 2.95 3.30 4.35 5.46 4.66 6.35 7.98 8.39 10.92 11 12.9 13.1 14.7 17.8 22.3 27.5 42.9 68 91

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

87

16

Turnbuckles

Green Pin® turnbuckles Eye - Hook generally to ASTM F1145-92

• Material : drop forged high tensile steel SAE 1035 or 1045 • Safety factor : MBL equals 5 x WLL • Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b • Finish : hot dipped galvanized • Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request working

diameter

take

length

length

load

thread

up

closed

open

inch

position b mm

position c mm

d mm

e mm

 6  6  9 12  6  9 12  6  9 12 18 12 18  6 12 18 24 12 18 24 12 18 24

 286  318  392  469  369  443  520  403  477  554  706  590  744  488  636  789  939  697  848 1000  760  913 1063

 422  448  600  752  491  644  796  522  674  826 1131  858 1163  595  897 1202 1506  968 1271 1575 1014 1320 1623

10 13 13 13 16 16 16 20 20 20 20 24 24 26 26 26 26 31 31 31 34 34 34

15 19 19 19 23 23 23 27 27 27 27 31 31 35 35 35 35 38 38 38 45 45 45

limit t

G-6314

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

88

0.45 0.68 0.68 0.68 1.02 1.02 1.02 1.36 1.36 1.36 1.36 1.81 1.81 2.27 2.27 2.27 2.27 2.95 2.95 2.95 3.4 3.4 3.4

a inch

/8 1 /2 1 /2 1 /2 5 /8 5 /8 5 /8 3 /4 3 /4 3 /4 3 /4 7 /8 7 /8 3

1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2

thickness thickness hook

hook

opening

diameter

width

length

length

weight

hook

eye

inside

inside

closed

each

f mm

g mm

eye h mm

eye i mm

position j mm

kg

14 16 16 16 21 21 21 24 24 24 24 28 28 31 31 31 31 37 37 37 45 45 45

10 12 12 12 14 14 14 17 17 17 17 20 20 24 24 24 24 30 30 30 32 32 32

13 18 18 18 21 21 21 25 25 25 25 32 32 36 36 36 36 46 46 46 54 54 54

 29  36  36  36  44  44  44  54  54  54  54  61  61  75  75  75  75  90  90  90 105 105 105

 49  58  57  57  79  78  78  90  89  89  89 100 101 118 117 117 116 145 144 144 156 160 158

0.47 0.82 1.06 1.28 1.31 1.56 1.71 2.04 4.49 2.3 2.85 3.33 4.24 3.87 5.09 6 7.52 8.12 10.4 12.1 12.7 15.1 17.1

Turnbuckles

Rigging screws Eye - Eye according to DIN 1480

• Material • Standard • Finish diameter thread

E-6351

: drop forged mild steel : DIN 1480 : electro-galvanized length open position c mm

length body

length end fitting

length thread

a mm

length closed position b mm

diameter eye inside h mm

weight each

f mm

diameter eye outside g mm

d mm

e mm

 5  6  8 10 12 14 16 20 22 24 30 33 36 42

114 160 168 210 222 244 300 334 372 410 440 490 554 600

170 246 248 300 305 334 416 466 527 587 605 690 740 800

 70 110 110 125 125 140 170 200 220 255 255 295 295 330

 57  80  84 105 110 123 143 165 185 208 220 245 277 300

 35  55  57  68  70  75  88 105 118 135 135 148 158 170

 16  20  22  31  35  40  47  52  60  65  71  88  94 110

 8  9 10 14 16 18 22 24 27 27 31 36 38 49

0.07 0.11 0.2 0.28 0.43 0.61 1 1.6 2.2 2.8 4.1 6 8.5 11

kg

1 2 3 4

Rigging screws Hook - Hook

5

according to DIN 1480 • Material • Standard • Finish diameter thread

E-6352

6

: drop forged mild steel : DIN 1480 : electro-galvanized length open position c mm

length body

length end fitting

length thread

opening hook

thickness hook

weight each

a mm

length closed position b mm

d mm

e mm

f mm

g mm

h mm

kg

 6  8 10 12 14 16 20 22 24 30 33 36

184 200 234 260 278 322 382 456 496 550 600 640

270 280 323 343 368 438 514 601 673 715 799 825

110 110 125 125 140 170 200 220 255 255 295 295

 92 100 117 130 139 161 191 228 248 275 300 320

 55  57  68  70  75  88 105 118 135 135 148 158

8 10.5 13 16 18 20 21 24 26 34 38 46

15 15 11 13 15 17 21 28 33 35 40 45

0.11 0.2 0.28 0.43 0.61 1 1.6 2.2 2.8 4.1 6 8.3

7 8 9 10 11 12 13 14 15 89

16

Turnbuckles

Rigging screws Eye - Hook according to DIN 1480

• Material • Standard • Finish diameter thread

E-6354

1

: drop forged mild steel : DIN 1480 : electro-galvanized length open position c mm

length body

a mm

length closed position b mm

length length end fitting end fitting

d mm

e mm

 5  6  8 10 12 14 16 20 22 24 30 33 36

125 172 184 222 241 261 311 358 414 453 495 545 597

180 258 264 311 324 351 427 490 559 630 660 744 782

 70 110 110 125 125 140 170 200 220 255 255 295 295

 56  77  85 106 117 124 144 170 200 215 240 260 275

length thread

opening hook

thickness hook

diameter eye inside k mm

weight each

i mm

diameter eye outside j mm

f mm

g mm

h mm

 57  80  84 105 111 122 150 167 186 205 220 245 277

 35  55  57  68  70  75  88 105 118 135 135 148 158

7 8 10.5 13 16 18 20 21 24 26 34 38 46

12 15 15 11 13 15 17 21 28 33 35 40 45

16 20 22 31 35 40 47 52 60 65 71 88 94

 8  9 10 14 16 18 22 24 27 27 31 36 38

0.07 0.11 0.2 0.28 0.43 0.61 1 1.6 2.2 2.8 4.1 6 8.4

kg

2 3 4 Rigging screws Jaw - Jaw

5

according to DIN 1480

6

• • • •

7

diameter thread

8 9 E-6353

10 11 12 13 14 15 16

Material Standard Finish Note

90

: : : :

drop forged mild steel DIN 1480 electro-galvanized supplied with locking nuts length open position c mm

length body

opening jaw

length inside

diameter pin

thickness jaw eye

diameter jaw eye

a mm

length closed position b mm

weight each

d mm

e mm

f mm

g mm

h mm

i mm

kg

6 8 10 12 14 16 20 22 24 30

191 194 236 266 316 374 438 466 514 544

277 274 325 349 406 490 570 611 691 709

110 110 125 125 140 170 200 220 255 255

7.5 8.5 11 13 16 18 20 22 24 30

12 12 16 20 30 38 42 44 46 50

M 6 M 6 M 8 M 10 M 12 M 12 M 16 M 18 M 20 M 24

 5  6  8 10 12 12 16 18 20 22

13 14 18 24 28 32 38 40 42 46

0.16 0.21 0.38 0.66 1.15 1.45 2.61 3.24 4.35 6.48

Turnbuckles

Rigging screws with Welding Ends according to DIN 1480

• Material • Standard • Finish diameter thread

E-6355

: drop forged mild steel : DIN 1480 : Body : electro-galvanized Welding ends : self coloured length open position c mm

length body

a mm

length closed position b mm

length stub-ends

length thread

d mm

length body inside e mm

f mm

g mm

 6  8 10 12 14 16 20 22 24 30 36

240 240 300 300 330 400 440 440 520 520 600

326 320 389 383 420 516 572 585 697 685 780

110 110 125 125 140 170 200 220 255 255 295

 86  80  89  83  90 116 132 145 177 165 185

120 120 150 150 165 200 220 220 260 260 300

 65  65  75  75  85 100 120 130 150 160 180

weight per 100 pcs kg

9.3 14 29 40 66 89 160 227 282 423 710

1 2 3 4

Turnbuckles (hamburgers)

5

for deck lashing

• Material • Finish

6

: mild steel : self coloured

7 minimum breaking load

S-6330

diameter thread

length thread

diameter bow

length bow

weight each

t

a mm

b mm

c mm

d mm

kg

13 13 18 18 20 20 21 21

24 24 27 27 30 30 36 36

400 500 400 500 400 500 400 500

16 16 18 18 20 20 20 20

210 260 210 260 210 260 210 260

3 3.8 4.4 5.5 5 6.3 7 8.8

8 9 10 11 12 13 14 15 91

16

Turnbuckles

Closed body rigging screws Jaw - Jaw

• Material : mild steel • Safety factor : MBL equals 5 x WLL, MBL equals 4 x WLL for diameter thread 45 and 50 • Finish : hot dipped galvanized • Note : end fittings of 6 and 8 mm rigging screws are electro-galvanized working load limit

G-6343

t

0.2 0.32 0.5 0.7 1.2 1.5 2.2 3.2 4.8 6 8.5 10

1

diameter thread

length body

length open position d mm

diameter pin

length inside

opening jaw

width jaw

b mm

length closed position c mm

a mm

 6  8 10 12 16 20 22 24 33 39 45 50

weight each

h mm

diameter jaw eye i mm

e mm

f mm

g mm

100 108 125 195 230 270 295 325 370 400 407 407

175 199 222 320 388 454 490 558 681 710 810 855

 255  282  320  479  572  672  730  819  977 1017 1170 1215

 5  6  8 10 12 16 20 22 30 33 39 45

19 25 26 32 39 46 55 63 85 86 86 98

7 9 10.5 13 18 20 25 30 38 45 48 50

 20  24  28  34  42  51  55  70  82  85  96 101

13 14 19 22 28 33 38 46 60 76 80 92

0.16 0.27 0.45 0.85 1.57 2.67 3.68 5.3 12 14.2 20.8 24

kg

2 3 4 Closed body rigging screws

5

Eye - Eye

6

• Material : mild steel • Safety factor : MBL equals 5 x WLL, MBL equals 4 x WLL for diameter thread 45 and 50 • Finish : hot dipped galvanized • Note : end fittings of 6 and 8 mm rigging screws are electro-galvanized

7 8

working load limit

9 G-6340

10 11 12 13 14 15 16

92

diameter thread

length body

length open position d mm

diameter

b mm

length closed position c mm

t

a mm

0.2 0.32 0.5 0.7 1.2 1.5 2.2 3.2 4.8 6 8.5 10

 6  8 10 12 16 20 22 24 33 39 45 50

width eye inside g mm

weight each

e mm

length eye inside f mm

100 108 125 195 230 270 295 325 370 400 407 407

165 178 210 325 380 455 495 545 665 725 840 890

 245  261  308  484  564  673  736  806  961 1032 1200 1250

5.5 6 8.5 11 12 16 16 19 29 34 30 37

11 12 13 30 40 50 50 56 70 80 85 92

11 12 13 15 20 24 24 28 35 40 40 44

0.13 0.2 0.6 0.8 1.4 2.4 3 4 9 11.5 20.8 24

kg

Turnbuckles

Closed body rigging screws Eye - Jaw

• Material : mild steel • Safety factor : MBL equals 5 x WLL, MBL equals 4 x WLL for diameter thread 45 and 50 • Finish : hot dipped galvanized • Note : end fittings of 6 and 8 mm rigging screws are electro-galvanized working load limit t

G-6345

0.2 0.32 0.5 0.7 1.2 1.5 2.2 3.2 4.8 6 8.5 10

diameter thread

length body

length open position d mm

diameter pin

b mm

length closed position c mm

a mm

 6  8 10 12 16 20 22 24 33 39 45 50

opening jaw

width jaw

e mm

length jaw inside f mm

100 108 125 195 230 270 295 325 370 400 407 407

170 189 216 323 384 455 493 552 673 718 825 870

 248  273  306  478  569  665  723  802  963 1018 1185 1230

length eye inside j mm

width eye inside k mm

weight each

h mm

diameter jaw eye i mm

g mm

M 5 M 6 M 8 M 10 M 12 M 16 M 20 M 22 M 30 M 33 M 39 M 45

19 25 26 32 39 46 55 63 85 86 86 98

7 9 10.5 13 18 20 25 30 38 45 48 50

 20  24  28  34  42  51  55  70  82  85  96 101

13 14 19 22 28 33 38 46 60 76 80 92

11 12 13 30 40 50 50 56 70 80 85 92

11 12 13 15 20 24 24 28 35 40 40 44

0.14 0.24 0.53 0.83 1.49 2.54 3.34 4.65 10.5 12.8 20.8 24

kg

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

93

16

Links

Applications Connecting links are used for chain slings. Master links and master link assemblies are used for 1, 2, 3 and 4-leg slings.

Range Van Beest supplies a wide range of Green Pin® connecting links for chain with diameter 6-32 mm, as well as a wide range of master links and master link assemblies. Van Beest can also offer other types of links in grade 8, grade 10 and stainless steel. Please see our Excel® catalogue for more information.

1 Design

2

Master links up to 37 t and master link assemblies up to 50 t are supplied with a flat part for easy connection of the master link in the sling; the connecting links are supplied unassembled but are designed for easy and quick assembly. All master links and connecting links are suitable for lifting purposes, with a safety factor of four times the working load limit. Each master link and connecting link carries the manufacturer’s symbol, the batch code, the steel grade and the CE conformity code marked in the body.

3 4

Finish

5

All connecting links and master links are painted yellow or red.

6

Certification Test certificates can be supplied upon request.

7

Instructions for use

8

Connecting links, master links and master link assemblies should be inspected before use to ensure that: • the link and the assemblies are both identifiable as being of the same steel grade; • all markings are legible; • links, assemblies and connecting links are free from nicks, gouges and cracks; • a link with the correct Working Load Limit has been selected with respect to the sling design i.e. load to be lifted, number of legs in the sling top angle etc. For further details we refer to EN 818, standard for Chain Slings; • links, assemblies and connecting links may not be heat treated as this may affect their Working Load Limit; • during the assembly of connecting links, we promote the use of a lubricant on the pin.

9 10 11

It is required that the products are regularly inspected and that the inspection should take place minimally in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the links are used in severe operating conditions.

12 13 14 15 16

94

Links

Green Pin® connecting links for connecting Grade 8 chain-slings • • • • •

P-6860Y P-6860R

c

Material Safety factor Standard Finish Certification working load limit

for chain diameter

t

1.12 2 3.2 5.4 8.2 12.8 15.5 21.6 32.8

: : : : :

Grade 8, alloy steel MBL equals 4 x WLL generally to EN 1677-1 painted yellow or red test certificates can be supplied upon request diameter

width outside

width inside

length inside

length inside

diameter eye

width inside

weight each

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

6 7-8 10 13 16 18-20 22 26 32

 8  9 10 14 17 21 23 26 39

 42  53  66  83 103 120 143 160 197

11 14 18 21 25 33 39 44 51

20 21 24 31 40 50 54 57 64

 52  55  64  85 105 129 140 153 174

11 13 18 24 28 33 37 43 55

15 19 25 30 36 43 53 59 68

0.14 0.15 0.32 0.7 1.29 2.08 3.33 4.92 8.2

g

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 95

16

Links

Master links • Material : Grade 8, alloy steel • Safety factor : MBL equals 4 x WLL • Standard : generally to EN 1677-4 • Finish : painted yellow or red • Certification : at no extra charges this product can be supplied with a works certificate and/or EC Declaration. Test certificates can be supplied upon request. • Note : from 50 t without flat part MS

working load limit t d

1

d

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

96

1.6 3.2 4.5 6.2 8.2 10.6 12.8 15.5 20 25 30 37 50 63 100 125

diameter

length inside

width inside

thickness

weight each

a mm

b mm

c mm

d mm

kg

13 16 18 20 22 25 28 30 36 38 44 45 50 55 70 80

100 120 135 150 150 170 200 200 250 250 280 300 300 350 400 400

 60  70  75  90  90  95 120 120 150 150 170 200 200 200 250 250

 7  7  9  9 11 13 13 17 17 21 21 23 -

0.33 0.56 0.8 1.11 1.36 1.96 2.92 3.4 6.1 6.8 10.8 11.7 14.75 20 39 52

Links

Master link assemblies • Material : Grade 8, alloy steel • Safety factor : MBL equals 4 x WLL • Standard : generally to EN 1677-4 • Finish : painted yellow or red • Certification : at no extra charges this product can be supplied with a works certificate and/or EC Declaration. Test certificates can be supplied upon request. • Note : from 60 t without flat part MTS

working load limit t

a

g

2.5 3.5 6.5 8.5 10 13 17 20 27 30 40 50 60 80 100

diameter

length inside

width inside

diameter

length inside

width inside

thickness

weight each

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

16 18 22 25 28 30 36 38 45 45 50 55 58 70 80

120 135 150 170 200 200 250 250 280 300 300 300 350 400 400

 70  75  90  95 120 120 150 150 170 200 200 200 200 250 250

13 16 18 20 20 22 25 28 33 36 38 38 42 55 58

100 100 120 120 120 135 135 170 200 200 150 150 150 300 300

 60  60  70  70  70  75  75  95 120 120  90  90  90 150 150

 7  6  9 11 11 14 14 17 17 21 21 23 -

1.2 1.8 2.9 3.9 4.9 6 9.6 12.6 19.7 22.5 24.5 28 34.6 74.7 92.4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 97

16

Swivels

Applications Thrust bearing swivels are used to prevent wire rope or chain from transferring their normal twisting motion to the item being lifted. Our swivels can be supplied with two types of end fittings. Green Pin® swivels are not designed to rotate under load, but are intended as positioning devices only. For rotation under load, thrust bearing swivels should be used.

Range Van Beest offers two types of swivels: • Green Pin® swivels, ranging from Working Load Limit 0.39 up to 20.5 tons, with eye-eye or jaw-eye terminals; • Thrust bearing swivels, ranging from Working Load Limit 1 up to 40 tons, with eye-eye terminals. Van Beest can also offer other types of swivels in grade 8 and grade 10. Please see our Excel® catalogue for more information.

1 2

Design The Green Pin® swivels are dropforged whereas the thrust bearing swivels are machined from carbon steel. The range of thrust bearing swivels we supply are fitted with grease nipples to ensure long life and ease of operation. Greasing depends on the frequency and intensity of use. Each swivel carries the WLL marking, the manufacturer’s symbol and the CE conformity code.

3 4

Finish

5

Green Pin® eye-eye and jaw-eye swivels are hot dipped galvanized. The thrust bearing swivels are painted.

6

Certification

7

Test certificates can be supplied upon request.

Instructions for use

8

Swivels should be inspected before use to ensure that:

9 10

-

11

The WLL should be applied in a straight pull and overloads are prohibited. Side loading is not allowed since the swivels are not designed for this purpose. Never replace a swivel pin or nut with a bolt other than the one designed for the purpose, as it may not be suitable for the load imposed.

12

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the swivels are used in severe operating conditions.

13 14 15 16

all markings are legible; swivels are free from nicks, gouges and cracks; a swivel with the correct Working Load Limit has been selected with respect to the load to be carried; swivels may not be heat treated as this may affect their Working Load Limit; the bolt, nut or any other locking system cannot vibrate out of position.

98

Swivels

Green Pin® swivels Eye - Eye

• • • • •

G-7713

Material Safety factor Standard Finish Certification working load limit t

0.39 0.57 1.02 1.6 2.4 3.3 4.5 5.7 8.2 20.5

: : : : :

high tensile steel, quenched and tempered MBL equals 5 x WLL generally to US Federal Spec. RR-C-271, Type VII, Class 2 hot dipped galvanized test certificates can be supplied upon request

diameter

length outside

width outside

length inside

width inside

length inside

length

a mm

b mm

c mm

d mm

e mm

f mm

g mm

 6  8 10 13 16 19 22 25 32 38

 87 106 129 164 199 221 257 295 337 501

 32  41  51  64  76  89 102 114 143 178

 18  21  24  33  40  44  52  59  68 102

 19  25  32  38  44  51  57  64  80 102

 27  32  38  51  60  67  78  89  94 150

 75  90 109 138 167 183 213 245 273 425

weight each

kg

0.1 0.18 0.32 0.6 1.13 1.82 2.83 4.06 7.43 20.8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 99

16

Swivels

Green Pin® swivels Jaw - Eye

• • • • • G-7723

Material Safety factor Standard Finish Certification

: : : : :

working load limit

diameter

length

width outside

length inside

width inside

length inside

length

width inside

diameter pin

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

kg

 6  8 10 13 16 19 22 25 32 38

 84  98 121 154 186 211 242 290 329 501

 32  41  51  64  76  89 102 114 143 178

 18  21  24  33  40  44  52  59  68 106

 19  25  32  38  44  51  57  64  80 102

 22  22  27  33  38  44  52  71  71 113

 67  75  92 114 135 154 178 217 230 364

12 13 16 19 24 29 30 44 52 73

 6  8 10 13 16 19 22 29 35 50

0.11 0.17 0.32 0.65 1.12 1.76 2.66 4.46 7.14 24.8

t

0.39 0.57 1.02 1.6 2.4 3.3 4.5 5.7 8.2 20.5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

100

high tensile steel, quenched and tempered MBL equals 5 x WLL generally to US Federal Spec. RR-C-271, Type VII, Class 3 hot dipped galvanized test certificates can be supplied upon request weight each

Swivels

Green Pin® Thrust bearing swivels Eye - Eye

• • • •

Material Safety factor Finish Certification

working load limit

P-7740

t

 1  2  3  5  8 10 15 20 30 40

: : : :

carbon steel MBL equals 5 x WLL painted black test certificates can be supplied upon request

length

length

thickness

diameter

diameter hole

a mm

b mm

c mm

d mm

e mm

174 223 278 290 366 390 457 474 612 760

128 173 210 222 276 300 355 372 472 600

12.5 19 26 26 40 40 40 40 64 68

 49  68  79  89 106 118 128 118 138 168

21 22 29 31 43 49 49 51 59 65

weight each

kg

1.4 3.5 6.4 7.9 15.2 19.1 26.6 25 50 -

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 101

16

Hooks

Applications Hooks are used in lifting systems as a connection between the load to be lifted and the wire rope or chain slings.

Range Van Beest offers a wide range of hooks, from drop forged carbon steel hooks to drop forged alloy steel swivel hooks, which are quenched and tempered. Van Beest can also offer other types of lifting hooks in grade 8, grade 10 and stainless steel. Please see our Excel® catalogue for more information.

1

Design

2

There are different types of hooks with their specific designs to suit a particular purpose. Eye hooks and swivel hooks are designed for wire rope or chain. Pipe line hooks are specially designed for handling tubes easily.

3

Most types of hooks are supplied with a safety latch.

4 5

• Working Load Limit; • manufacturer’s identification symbol; • steel grade; • traceability code; • CE.

6

Finish

All types carry the following markings:

The grade 8 hooks are painted red, grade 4 hooks are painted green. Upon request hooks can be supplied galvanized or self coloured.

7

Certification

8

All hooks can be supplied with test certificates upon request.

9

Instructions for use Hooks should be inspected before use to ensure that:

10

• all markings are legible; • hooks are free from nicks, gouges and cracks; • the latch is present; • the latch is functional; • a hook with the correct Working Load Limit has been selected with respect to the sling design i.e. the load to be lifted, the number of legs in the sling, the top angle etc. For further details we refer to EN 818, norm for Chain Slings; • the hook is never side-, tip- or back-loaded; • always make sure that the hook is supporting the load correctly, the latch should not be supporting the load; • hooks may not be heat treated as this may affect their Working Load Limit; • never repair or reshape a hook by welding, heating or bending as this may affect the Working Load Limit; • do not swivel a swivel hook when it is supporting a load.

11 12 13 14

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the hooks are used in severe operating conditions.

15 16

102

Hooks

Green Pin® large eye hooks, Grade 4 with safety latch • • • • •

Material Safety factor Standard Finish Certification working load limit

P-6714C

: : : : :

carbon steel, Grade 4 MBL equals 5 x WLL generally to EN 1677-5 painted green test certificates can be supplied upon request

length

t

a mm

diameter eye inside b mm

0.8 1 1.6 2 3.2 5

 81  91 105 124 147 190

19 22 27 32 39 50

width opening

width opening

thickness

width

weight each

f mm

diameter eye outside g mm

c mm

d mm

e mm

24 26 32 34 44 55

20 22 27 30 37 48

16 18 20 24 31 37

19 22 27 31 36 48

37 45 52 62 74 96

0.4 0.4 0.6 0.98 1.68 3.6

kg

1 2 3 4 Green Pin® large eye hooks, Grade 8

5

with safety latch • • • • • P-6714A

Material Safety factor Standard Finish Certification working load limit

: : : : : length

6

alloy steel, Grade 8 MBL equals 4 x WLL generally to EN 1677-2 painted red test certificates can be supplied upon request

t

a mm

diameter eye inside b mm

1.25 1.6 2.5 3.2 5.4 8 11.5 16 22

 81  91 105 124 147 190 230 254 316

19 22 27 32 39 50 64 70 89

7 weight each

8

f mm

diameter eye outside g mm

kg

19 22 27 31 36 48 60 69 81

 37  45  52  62  74  96 123 139 169

0.26 0.57 0.81 1.27 1.68 3.6 7 10.7 16.7

9

width opening

width opening

thickness

width

c mm

d mm

e mm

24 26 32 34 44 55 64 70 91

20 22 27 30 37 48 53 60 77

16 18 20 24 31 37 47 58 63

10 11 12 13 14 15

103

16

Hooks

Green Pin® swivel hooks, Grade 8 with safety latch • • • •

Material Safety factor Finish Certification working load limit

1 2 j

3 4 5 6 7 8 9 10 11 12 13 14 15 16

104

alloy steel, Grade 8 MBL equals 4 x WLL painted red test certificates can be supplied upon request

length

length inside

width inside

width opening

width opening

diameter

width

width

width

thickness

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

h mm

i mm

j mm

kg

1.25 1.6 2.5 3.2 5.4 8 11.5 16 22 31.5

118 145 167 180 217 276 310 352 434 512

 28  35  43  47  54  69  69  84 107 117

 31  40  47  47  64  78  82  92 115 132

24 26 32 34 44 55 61 65 85 90

20 22 27 30 37 49 53 58 78 87

11 14 17 17 21 26 22 24 29 34

19 23 27 31 37 49 60 67 80 94

 52  68  81  81 106 130 136 154 191 222

 30  37  43  43  64  77  82  92 108 132

16 18 20 24 31 37 46 52 64 80

0.45 0.9 1.3 1.6 3.8 6.9 10.6 16 27 60

P-6703A

j

: : : :

weight each

Hooks

Green Pin® pipe line hooks

for handling large cylindrical shapes like pipe lines, tubes etc.

• • • •

Material Safety factor Finish Certification

: : : :

alloy steel MBL equals 5 x WLL painted red test certificates can be supplied upon request

working load limit at hook top bottom

P-6731

length

t

t

a mm

diameter eye inside b mm

2

7.5

167

35

width opening

diameter

thickness

width

e mm

diameter eye outside f mm

c mm

d mm

74

30

weight each

g mm

kg

31

73

57

2.65

1 2 3 4 5 Green Pin® sliding choker hooks, Grade 8

6

with safety latch

• • • •

working load limit

P-6706A

f

e

e g

a

d

Material Safety factor Finish Certification diameter rope

: : : :

7

alloy steel, Grade 8 MBL equals 5 x WLL painted red test certificates can be supplied upon request length

width

thickness

length

diameter

thickness

opening

b mm

c mm

d mm

e mm

f mm

g mm

kg

 63  82  98 115 142

19 26 30 36 46

 65  83  97 110 145

14 17 19 22 36

30 30 33 40 60

16 19 25 28 35

0.4 0.8 1.2 1.9 4.3

t

mm

a mm

0.8 1.6 2.5 3.2 5.4

  6 - 11 10 - 13 14 - 16 16 - 20 22 - 26

112 143 170 196 260

weight each

c b

8 9 10 11 12 13 14 15

105

16

Eye Bolts/ Eye Nuts

Applications Eye bolts and eye nuts are used for lifting machines, appliances or any other objects which cannot be lifted by hand or by fork lift truck.

Range Van Beest offers a wide range of lifting eye bolts and eye nuts, from M6 up to M100, with Working Load Limits from 0.07 t up to 40 t. Larger sizes can be supplied on request. Van Beest can also offer other types of eye bolts and nuts in grade 8 and stainless steel. Please see our Excel® catalogue for more information.

1 Design

2

The eye bolts and eye nuts are manufactured from C15 steel, drop forged and with metric thread. Each eye bolt and eye nut is individually stamped with:

3

-

4 5

Working Load Limit valid for in-line pull; thread diameter; material identification symbol C15; manufacturer’s symbol; CE.

Finish

6

The eye bolts and eye nuts can be either self coloured, electro-galvanized or hot dipped galvanized.

7

Certification At no extra charges eye bolts and nuts can be supplied with a works certificate and/or EC Declaration of Conformity. Test certificates can be supplied upon request .

8

Instructions for use

9

Eye bolts and eye nuts should be inspected before use to ensure that:

10

• all markings are legible; • eye bolts and eye nuts are free from nicks, gouges and cracks; • make sure the thread is undamaged and clean; • an eye bolt or eye nut with the correct Working Load Limit has been selected with respect to load to be lifted; • eye bolts or eye nuts may not be heat treated as this may affect their Working Load Limit; • never repair or reshape an eye bolt or eye nut by welding, heating or bending as this may affect the Working Load Limit; • never grind, machine or cut an eyebolt or eye nut; • when used as lifting devices, the eye bolt or eye nut should always be screwed into the object to be lifted in such a way that they fit properly against the object to be lifted; • Working Load Limits are valid for in-line pull only and have to be reduced for non-axial loading, for further details please refer to the standard, DIN 580 for eye bolts or DIN 582 for eye nuts.

11 12 13

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the products are used in severe operating conditions.

14 15 16

106

generally to DIN 580

S-8140 E-8140

• Material : carbon steel, C15 • Safety factor : MBL equals 6 x WLL • Standard : generally to DIN 580 • Finish : self coloured electro-galvanized • Certification : at no extra charges this product can be supplied with a works certificate and/or EC Declaration of Conformity. Test certificates can be supplied upon request working load limit t

0.07 0.14 0.23 0.34 0.49 0.7 0.9 1.2 1.5 1.8 2.5 3.2 4.3 4.6 6.1 6.3 8 8.6 11.5 16 21 28 40

diameter thread

diameter base

diameter eye inside d mm

length

thickness base

height

b mm

diameter eye outside c mm

a mm

e mm

f mm

g mm

M   6 x 1.00 M   8 x 1.25 M  10 x 1.50 M   12 x 1.75 M   14 x 2.00 M   16 x 2.00 M   18 x 2.50 M   20 x 2.50 M   22 x 2.50 M   24 x 3.00 M   27 x 3.00 M   30 x 3.50 M   33 x 3.50 M   36 x 4.00 M   39 x 4.00 M   42 x 4.50 M   45 x 4.50 M   48 x 5.00 M   56 x 5.50 M   64 x 6.00 M   72 x 6.00 M   80 x 6.00 M 100 x 6.00

 20  20  25  30  35  35  40  40  45  50  50  65  65  75  75  85  85 100 110 120 150 170 190

 36  36  45  54  63  63  72  72  81  90  90 108 108 126 126 144 144 166 184 206 260 296 330

 20  20  25  30  35  35  40  40  45  50  50  60  60  70  70  80  80  90 100 110 140 160 180

13 13 17 20.5 27 27 30 30 35 36 36 45 45 54 54 63 63 68 78 90 100 112 130

 6  6  8 10 12 12 14 14 14 18 18 22 22 26 26 30 35 35 38 42 50 55 60

 36  36  45  53  60  62  71  71  80  90  90 109 110 128 130 147 150 168 187 208 260 298 330

weight per 100 pcs kg

3 6 10.3 17.7 27.7 28 40.5 42.4 67.3 83.4 122 166 216 265 334 403 521 632 880 1240 2330 3420 4910

Eye Bolts/ Eye Nuts

Green Pin® eye bolts

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

107

16

Eye Bolts/ Eye Nuts

Green Pin® eye nuts generally to DIN 582

S-8142 E-8142

working load limit

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

• Material : carbon steel, C15 • Safety factor : MBL equals 6 x WLL • Standard : generally to DIN 582 • Finish : self coloured electro-galvanized • Certification : at no extra charges this product can be supplied with a works certificate and/or EC Declaration of Conformity. Test certificates can be supplied upon request

108

diameter thread

diameter base

diameter eye inside d mm

thickness base

height

b mm

diameter eye outside c mm

t

a mm

e mm

f mm

0.07 0.14 0.23 0.34 0.49 0.7 0.9 1.2 1.5 1.8 2.5 3.2 4.3 4.6 6.1 7 8 8.6 8.6 11.5 16 21

M   6 x 1.00 M   8 x 1.25 M 10 x 1.50 M 12 x 1.75 M 14 x 2.00 M 16 x 2.00 M 18 x 2.50 M 20 x 2.50 M 22 x 2.50 M 24 x 3.00 M 27 x 3.00 M 30 x 3.50 M 33 x 3.50 M 36 x 4.00 M 39 x 4.00 M 42 x 4.50 M 45 x 4.50 M 48 x 5.00 M 52 x 5.00 M 56 x 5.50 M 64 x 6.00 M 72 x 6.00

 20  20  25  30  35  35  40  40  45  50  50  65  65  75  75  85  85 100 110 110 120 150

 36  36  45  54  63  63  72  72  81  90  90 108 108 126 126 144 144 166 184 184 206 260

 20  20  25  30  35  35  40  40  45  50  50  60  60  70  70  80  80  90 100 100 110 140

8.5 8.5 10 11 13 13 16 16 18 20 20 25 25 30 30 35 35 40 45 45 50 60

 36  36  45  53  60  62  71  71  80  90  90 109 110 128 130 147 150 168 187 187 208 260

weight per 100 pcs kg

4.2 5.2 9.4 16 22 24 36 35.2 58.6 70.6 102 132 170 208 260 311 407 502 830 669 930 1500

Eye Bolts/ Eye Nuts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 109

16

Loadbinders

Applications Loadbinders are used for easy and efficient tightening of chain used for lashing purposes. The loadbinders are designed in such a way that they can effortlessly be operated using one hand.

Range Van Beest offers three types of loadbinders: two ratchet types and a lever type, depending on the application. The loadbinders are suitable for various chain sizes, ranging from 8 up to 16 mm. The ratchet types can be supplied with two hooks or two eyes as end fittings.

Design The Green Pin® loadbinders are designed with an ergonomic, easy-to-use handle for simple, single-hand use, and are manufactured from drop forged or cast steel. One ratchet type is equipped with standard chain eye grab hooks, the other type has an improved version of these hooks to reduce chain wear substantially. This type of loadbinder is designed to meet requirements of standard EN 12195-3. Each handle carries the following markings: -

1 2

Finish The Green Pin® loadbinders are painted either red or green.

3

Certification

4

Test certificates can be supplied upon request.

5

Instructions for use Loadbinders should be inspected before use to ensure that:

6

• all markings are legible; • loadbinders are free from nicks, gouges and cracks; • loadbinders should never be used for lifting or hoisting applications; • a loadbinder with the correct Lashing Capacity has been selected with respect to chain size and load to be lashed. For further details we refer to EN 12195-3, standard for Lashing Chains; • the loadbinder should never be side loaded, since loadbinders are suitable for in-line pull only; • the loadbinder must be hooked to the chain in such a way that you can operate the loadbinder while standing on the ground; • never use a loadbinder while standing on the load; • always keep yourself out of the path of the moving handle; • if the handle of the lever type loadbinder cannot reach the correct locked position, never use a cheater pipe. In that case a ratchet type loadbinder must be used; • in the locked position of a lever type loadbinder the bottom side of the loadbinder should touch the chain link. In this position secure the handle to the chain using the loose end of the chain or a piece of rope or soft wire; • loadbinders may not be heat treated as this may affect their Lashing Capacity; • never repair or reshape a loadbinder by welding, heating or bending as this may affect the Lashing Capacity; • if the handle of a lever type loadbinder is released by hand, make sure you use an open hand under the handle and push upward. Do not close your hand around the handle. Move the handle with caution since it may whip as it comes free. Keep your body away from the moving handle.

7 8 9 10 11 12

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the loadbinders are used in severe operating conditions. Regularly lubricate moving parts of a loadbinder to extend product life and reduce wear.

13 14 15 16

chain diameter, for which the loadbinder is suitable; manufacturer’s symbol (GP); not for lifting or hoisting applications; Lashing Capacity; minimum breaking load.

110

Loadbinders

Green Pin® ratchet type loadbinders with hooks, according to EN 12195-3

P-7170

• • • • • •

Material Safety factor Standard Finish Certification Note chain size

length

: : : : : :

drop forged, Grade 8, quenched and tempered MBL equals 2 x Lashing Capacity EN 12195-3 painted red test certificates can be supplied upon request Stf = 3000 daN

diameter thickness

length barrel

length open

length closed

width

take-up

lashing capacity

proof load

minimum breaking load

weight each

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

mm

t

t

t

kg

 8 10 13 16

387 387 387 387

65 65 65 65

14 14 14 14

255 255 260 260

754 775 870 896

590 610 700 736

11 12 15 19

164 165 170 160

4 6.3 10 16

5 7.9 12.5 20

8 12.6 21.2 32.2

4.5 5.4 7.7 10.2

1 2 3 4 Green Pin® ratchet type loadbinders

5

without hooks, according to EN 12195-3

P-7190

• • • • • •

Material Safety factor Standard Finish Certification Note chain size

length

: : : : : :

6

drop forged, Grade 8, quenched and tempered MBL equals 2 x Lashing Capacity EN 12195-3 painted red test certificates can be supplied upon request Stf = 3000 daN

diameter thickness length barrel

length open

length closed

mm

a mm

b mm

c mm

d mm

e mm

f mm

 8 10 13 16

387 387 387 387

65 65 65 65

14 14 14 14

255 255 260 260

538 546 589 579

374 381 419 419

7

diameter diameter take-up lashing eye eye capacity inside outside g h mm mm mm t

18 20 25 30

50 55 66 71

164 165 170 160

4 6.3 10 16

proof load

minimum weight breaking each load

t

t

5 7.9 12.5 20

8 12.6 21.2 32.2

8 9

kg

3.3 3.4 4 4.1

10 11 12 13 14 15

111

16

Loadbinders

Green Pin® ratchet type loadbinders with hooks

P-7130R P-7130G

• • • •

Material Safety factor Finish Certification

: : : :

chain size

length handle

mm

a mm

b mm

210 385 385 385

46 65 65 65

 6- 8   8 - 10 10 - 13 13 - 16

drop forged/cast steel, quenched and tempered MBL equals 3.5 x Lashing Capacity painted red or green test certificates can be supplied upon request

diameter thickness

length barrel

length open

length closed

width

take-up

c mm

d mm

e mm

f mm

g mm

mm

10 15 15 15

160 255 255 260

510 739 759 838

420 578 587 687

 9 12 16 18

 90 161 172 151

lashing capacity

proof load

t

t

1.18 2.36 2.45 4.9 4.175 8.35 5.9 11.8

minimum breaking load

weight each

t

kg

4.13 8.62 14.97 20.865

1.7 4.82 5.92 7.85

1 2 3 4 Green Pin® ratchet type loadbinders

5

without hooks

6

• • • •

7 P-7150R P-7150G

8 9 10 11 12 13 14 15 16

112

Material Safety factor Finish Certification

: : : :

drop forged/cast steel, quenched and tempered MBL equals 3.5 x Lashing Capacity painted red or green test certificates can be supplied upon request

chain size

length handle

diameter thickness length barrel

mm

a mm

b mm

c mm

  8 - 10 10 - 13 13 - 16

385 385 385

65 65 65

15 15 15

length open

length closed

d mm

e mm

f mm

255 255 260

546 555 560

385 383 409

diameter diameter take-up lashing eye eye capacity inside outside g h mm mm mm t

12 14 17

57 57 64

161 172 151

proof load

t

2.45 4.9 4.175 8.35 5.9 11.8

minimum weight breaking each load t

kg

8.62 14.97 20.865

3.95 4.75 6.65

with hooks P-7110R P-7110G

• • • •

Material Safety factor Finish Certification chain size

: : : :

drop forged/cast steel, quenched and tempered MBL equals 3.5 x Lashing Capacity painted red or green test certificates can be supplied upon request

length

length open

length closed

length handle

length

length

width

take-up

lashing capacity

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

mm

t

  8 - 10 10 - 13 13 - 16

610 768 830

592 680 833

488 550 680

408 458 547

287 325 395

287 325 395

12 16 18

104 130 153

2.45 4.175 5.9

proof load

t

4.9 8.35 11.8

minimum breaking load t

8.62 14.97 20.86

weight each

Loadbinders

Green Pin® lever type loadbinders

kg

2.81 5.08 9.5

1 2 3 4 Green Pin® spring type loadbinders

5

with hooks • • • •

P-7120

Material Safety factor Finish Certification chain size

f

c

take-up

7

length

length open

length closed

length handle

length

length

width

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

mm

t

t

t

  8 - 10 10 - 13

873 940

836 903

739 791

392 438

285 330

450 475

13 15

 97 112

2.45 4.175

4.9 8.35

8.575 12.525

a

d

6

: drop forged/cast steel, quenched and tempered :   8-10 mm: MBL equals 3.5 x Lashing Capacity 10-13 mm: MBL equals 3 x Lashing Capacity : painted green : test certificates can be supplied upon request lashing capacity

proof load

minimum breaking load

weight each

kg

7.2 9.0

8 9 10 11

g

12 13

b

14 e

15 113

16

Chain

Applications Short and long link commercial grade 3 chain is for general purpose use. These types of chain may not be used for lifting purposes.

Range Van Beest supplies a wide range of commercial chain, generally to DIN 763 and DIN 766 ranging from 3 up to 20 mm. Larger dimensions can be supplied on request. Van Beest can also offer lifting chain in grade 8, grade 10 and stainless steel. Please see our Excel® catalogue for more information.

1

Design

2

Chain supplied by Van Beest generally follows DIN 763 for the long link chain or DIN 766 for short link chain. Steel quality used for chain production is mild steel grade 3. These types of chain are not suitable for lifting purposes.

3

Finish

4

All chain is available in self coloured, electro-galvanized and hot dipped galvanized condition.

5

Instructions for use Chain should be inspected before use to ensure that:

6

• chain is free from nicks, gouges and cracks; • chain may not be heat treated as this may affect the performance; • DIN 766 and DIN 763 chain may not be used for lifting purposes; • chain is used for in-line pull only; • never repair or reshape a chain by welding, heating or bending as this may affect the performance.

7 8

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the chain is used in severe operating conditions.

9 10 11 12 13 14 15 16

114

Chain

Short link chain

generally to DIN 766, commercial quality Not to be used for lifting applications! • Material • Standard • Finish

: mild steel, Grade 3 : generally to DIN 766 : self coloured, electro-galvanized or hot dipped galvanized

diameter

S-7660 E-7661 G-7662

width outside c mm

weight per m

a mm

length inside b mm

 3  4  5  6  7  8  9 10 11 13 16 18 20

16 16 18.5 18.5 22 24 27 28 31 36 45 50 56

11 14 17 20 23 26 30 34 36 44 54 60 67

0.17 0.32 0.5 0.75 1 1.35 1.8 2.25 2.7 3.8 5.8 7.3 9

kg

1 2 3 4

Long link chain

5

generally to DIN 763, commercial quality Not to be used for lifting applications! • Material • Standard • Finish diameter

S-7630 E-7631 G-7632

6

: mild steel, Grade 3 : generally to DIN 763 : self coloured, electro-galvanized or hot dipped galvanized

7

width outside c mm

weight per m

a mm

length inside b mm

 3  4  5  6  7  8 10 13 16 20

 26  32  36  42  48  54  66  82 100 125

13 16 20 24 28 32 40 50 60 75

0.14 0.27 0.43 0.63 0.86 1.1 1.75 2.95 4.45 7

8

kg

9 10 11 12 13 14 15 115

16

Plate Lifting Clamps

Applications Plate lifting clamps are used for lifting and transportation of all kinds of steel plates and beams.

Range Van Beest offers a wide range of lifting clamps for horizontal and/or vertical lifting of steel plates and beams ranging from Working Load Limit 0.75 t up to 20 t. The steel plates may have a thickness up to 150 mm. Upon request other types of clamps can be manufactured.

Design Four different designs have been developed: • type E for lifting and vertical transportation of steel plates; • type EH for horizontal transportation of steel plates; • type EU a universal type for transportation in all directions; • type ESV for transportation of steel beams. Type E, EH and EU are also available as ES, EHS and EUS versions, which means that these versions have an increased opening.

1

All types of lifting clamps carry the following markings:

3

• Working Load Limit; • manufacturer’s identification symbol; • traceability code; • jaw opening; • CE; • serialnumber.

4

Finish

2

The plate lifting clamps are made of carbon and alloy steel and are painted.

5

Certification

6

All plate lifting clamps are supplied with a serial number and a manufacturer’s certificate. Test certificates can be supplied upon request.

7 8 9 10 11 12 13 14 15 16

116

Plate lifting clamps should be inspected before use to ensure that: • all markings are legible; • plate lifting clamps are free from nicks, gouges and cracks; • a clamp with the correct Working Load Limit has been selected with respect to the load to be lifted; • always make sure that the clamp is supporting the load correctly; • the WLL should be applied in a straight pull and overloads are not permitted; • clamps may not be heat treated as this may affect their Working Load Limit; • never repair or reshape a clamp by welding, heating or bending as this may affect the Working Load Limit. It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the clamps are used in severe operating conditions.

Plate Lifting Clamps

Instructions for use

E - ES

1 2 3

Plate lifting clamps type E and ES. Do not side load the lifting eye.

4

EU - EUS

5 6 7 8 9

Plate lifting clamps type EU and EUS. Load reduction should be applied as per load direction angle and corresponding remaining percentage of the Working Load Limit.

10

EH - EHS 100% WLL

11 12 13

Plate lifting clamps type EH and EHS. Full load may be applied up to a load direction angle of maximum 30˚. Do not use larger angles.

14 15 117

16

Plate Lifting Clamps

Hfdstk 6

2-1

Green Pin® plate lifting clamp, type E for lifting and vertical transportation • • • •

P-6615

Material Safety factor Finish Certification type

0.75 E 1    E 1.5   E 2    E 3    E 4    E 6    E 7.5   E 9    E 12    E 15    E 20    E

1

: : : :

working load limit

carbon and alloy steel MBL equals 5 x WLL painted manufacturer’s certificate including serial number test certificates can be supplied upon request width opening

length opening

length

length

width

thickness

d mm

diameter inside eye e mm

t

a mm

b mm

c mm

0.75 1 1.5 2 3 4 6 7.5 9 12 15 20

0 - 14 0 - 22 0 - 22 0 - 28 0 - 28 0 - 32 0 - 32 0 - 42 0 - 52 0 - 75 0 - 75 0 - 75

 45  72  72  87  87 115 115 120 125 135 135 160

115 200 200 237 237 293 293 350 380 480 480 550

weight each

f mm

g mm

kg

210 337 337 430 430 500 500 560 620 760 760 890

 30  57  57  70  70  86  86  80  88  90  90 100

104 170 170 218 218 226 226 305 274 410 410 490

 36  44  52  65  77  69  85  90  90 130 130 140

1.5 6 7.1 13.2 14.2 21 24.2 35 48 90 90 132

2 3 Hfdstk 6

1-1

Hfdstk 6

2-1

4 5

Green Pin® plate lifting clamp, with enlarged opening, type ES

6

for lifting and vertical transportation

7 P-6616

8

Material Safety factor Finish Certification type

9 10

0.75 ES 1    ES 1.5   ES 2    ES 3    ES 4    ES 6    ES 7.5   ES 9    ES 12    ES 15    ES 20    ES

11 12 13 14 15 16

• • • •

118

: : : :

working load limit

carbon and alloy steel MBL equals 5 x WLL painted manufacturer’s certificate including serial number test certificates can be supplied upon request width opening

length opening

length

length

width

thickness

d mm

diameter inside eye e mm

t

a mm

b mm

c mm

0.75 1 1.5 2 3 4 6 7.5 9 12 15 20

12 -   24 18 -   38 18 -   38 23 -   50 23 -   50 26 -   58 26 -   58 30 -   72 48 - 100 75 - 150 75 - 150 75 - 150

 45  72  72  87  87 115 115 120 125 135 135 160

115 200 200 237 237 293 293 350 380 480 480 550

weight each

f mm

g mm

kg

210 337 337 430 430 500 500 560 620 760 760 890

 30  57  57  70  70  86  86  80  88  90  90 100

114 186 186 240 240 252 252 335 274 485 485 565

 36  44  52  65  77  69  85  90  90 130 130 140

1.5 6 7.1 13.2 14.2 21 24.2 35 48 90 94 132

for lifting and transportation in all directions

P-6625

• • • •

Material Safety factor Finish Certification

type

: : : :

working load limit t

  0.75 EU  1.5  EU  3   EU  6    EU  7.5  EU  9   EU 12    EU

0.75 1.5 3 6 7.5 9 12

carbon and alloy steel MBL equals 5 x WLL painted manufacturer’s certificate including serial number test certificates can be supplied upon request width opening

length opening

length

length

width

thickness

d mm

diameter inside eye e mm

a mm

b mm

c mm

0 - 14 0 - 22 0 - 28 0 - 32 0 - 42 0 - 52 0 - 75

 45  72  87 115 120 125 135

115 200 237 293 350 380 480

weight each

f mm

g mm

kg

220 327 450 480 580 700 780

 31  68  80  80  80  90 115

104 170 218 226 305 274 410

 36  52  77  85  90  90 130

1.6 7.9 15.2 26 35 52 94

Plate Lifting Clamps

Green Pin® plate lifting clamp, type EU

1 2 3 4

P-6626

Green Pin® plate lifting clamp, with enlarged opening, type EUS

5

for lifting and transportation in all directions

6

• • • •

Material Safety factor Finish Certification type

: : : :

working load limit t

  0.75 EUS  1.5  EUS  3    EUS  6    EUS  7.5  EUS  9    EUS 12    EUS

0.75 1.50 3 6 7.5 9 12

7

carbon and alloy steel MBL equals 5 x WLL painted manufacturer’s certificate including serial number test certificates can be supplied upon request width opening

length opening

length

length

a mm

b mm

c mm

12 -   24 18 -   38 23 -   50 26 -   58 30 -   72 48 - 100 75 - 150

 45  72  87 115 120 125 135

115 200 237 293 350 380 480

8 width

thickness

d mm

diameter inside eye e mm

weight each

f mm

g mm

kg

220 327 430 480 580 700 780

 31  68  80  80  80  90 115

114 186 240 252 335 384 485

 36  52  78  95 100 100 140

1.6 7.9 15 26 35 52 94

9 10 11 12 13 14 15

119

16

Plate Lifting Clamps

Green Pin® plate lifting clamp, type EH for lifting and horizontal transportation

P-6635

• • • •

Material Safety factor Finish Certification

type

  1.5 EH   3   EH   4   EH   6   EH   8   EH 10   EH 14   EH 18   EH

: : : :

working load limit per set

carbon and alloy steel MBL equals 5 x WLL painted manufacturer’s certificate including serial number test certificates can be supplied upon request width opening

thickness

diameter eye

thickness

width

length

width

weight per set

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

1.5 3 4 6 8 10 14 18

0 - 22 0 - 60 0 - 60 0 - 60 0 - 60 0 - 60 0 - 60 0 - 60

18 16 20 20 25 25 30 30

16.2 23 42 42 42 42 48 48

12 25 25 25 25 30 35 40

16 18 22 22 27 27 32 32

 70 155 155 155 155 155 155 155

 60  80  80 100 120 120 130 150

4 11 16.4 17.8 20 28 36 48.2

1 2 3 4

Green Pin® plate lifting clamp, with enlarged opening, type EHS

5

for lifting and horizontal transportation

6 7

P-6636

8

• • • •

Material Safety factor Finish Certification

type

9   3 EHS   4 EHS   6 EHS   8 EHS 10 EHS 14 EHS 18 EHS

10 11 12 13 14 15 16

120

: : : :

working load limit per set

carbon and alloy steel MBL equals 5 x WLL painted manufacturer’s certificate including serial number test certificates can be supplied upon request width opening

thickness

diameter eye

thickness

width

length

width

weight per set

t

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

 3  4  6  8 10 14 18

0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100

16 20 20 25 25 30 30

23 42 42 42 42 48 48

25 25 25 25 30 40 40

18 22 22 27 27 32 32

155 155 155 155 155 155 155

 80  80 100 120 120 130 150

12.4 17.6 20 26 32 40 52

for lifting and transportation of steel beams

P-6685

• • • •

Material Safety factor Finish Certification

type

2 ESV 3 ESV 4 ESV 5 ESV 6 ESV

working load limit

: : : :

carbon and alloy steel MBL equals 5 x WLL painted manufacturer’s certificate including serial number test certificates can be supplied upon request width jaw opening b mm

length

height

t

width jaw opening a mm

width

thickness

width

d mm

diameter eye inside e mm

c mm

2 3 4 5 6

0 - 160 0 - 160 0 - 250 0 - 260 0 - 340

60 - 200 60 - 200 80 - 310 90 - 320 85 - 420

270 270 400 400 480

weight each

f mm

g mm

h mm

kg

210 - 250 250 - 290 285 - 370 355 - 445 360 - 510

65 65 70 80 80

120 120 125 125 125

16 16 20 20 20

22 22 28 36 36

5.1 5.3 8.6 11.1 14

Plate Lifting Clamps

Green Pin® lifting clamp, type ESV

1 2 3 4

Green Pin® plate lifting clamp

5

spare parts

6 7 8 P-6651 lifting eye

P-6652 lock lever assembly

S-6653 lock spring

9 10 11 P-6654 cam assembly

S-6655 cam pin

S-6656 pivot

12 13 S-6657 eye pin

14

P-6658 universal eye component

15 121

16

Blocks

Applications Blocks are used in lifting systems, to change load direction or to drag a load. Together with the wire rope, blocks are the connection between the load to be lifted and the lifting device.

Range Van Beest offers a wide range of blocks, from single sheave snatch blocks to multiple-sheave malleable iron blocks for use with wire or fibre rope. Blocks are suited for head loads ranging from 0.4 up to 15 tons. Other types of blocks can be offered upon special request.

Design There are different types of blocks with their specific designs to suit a particular purpose. Some types are equipped with bronze bushes while other types have conical roller bearings depending on frequency of use and line speed. Snatch blocks allow the wire rope to be attached easily by opening up the block instead of threading the wire rope through the block. All types carry the following markings: • Working Load Limit; • manufacturer’s identification symbol (GP); • traceability code; • CE.

1 2

Finish Blocks can be either painted or electro-galvanized.

3

Certification

4

All blocks can be supplied with test certificates upon request.

5

Instructions for use

6

The basic objective of any lifting operation is to move the load to the desired location and land it safely, efficiently and without damage to the load, the equipment used and/or the surrounding area. The following point must be observed:

7

• Do not attempt any lifting operation unless you have been trained in the use of the equipment concerned;

8

Blocks should be inspected before use to ensure that: • all markings are legible; • blocks are free from nicks, gouges and cracks; • the sheaves are functional and rotate easily; • a block with the correct Working Load Limit has been selected with respect to the load being moved and the  wire rope being used; • the block is never side loaded but strictly used for straight or in-line pull; • the Working Load Limit applies to static loads only, shock loading must be taken into account when selecting  a block; • always make sure that the hook, eye or shackle of the block is supporting the load correctly; • blocks may not be heat treated as this may affect their Working Load Limit; • never repair or reshape a block by welding, heating or bending as this may affect the Working Load Limit.

9 10 11 12

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the blocks are used in severe operating conditions.

13 14 15 16

122

All working load limits of our blocks are the maximum loads on the blocks and their connecting fittings. The load on a sheave or block varies with the angle between the lead and load line. See figure 1. When the two lines are parallel, 1 t on the lead line results in a load of 2 t on the fitting. As the working angle between the lines increases, the load on the fitting is reduced by the angle factor as per table 1. All loads shown ignore frictional losses in the lifting system.

working angle

angle factor

0° 10° 20° 30° 40° 45° 50° 60° 70° 80° 90° 100° 110° 120° 130° 135° 140° 150° 160° 170° 180°

2 1.99 1.97 1.93 1.87 1.84 1.81 1.73 1.64 1.53 1.41 1.29 1.15 1 0.84 0.76 0.68 0.52 0.35 0.17 0

Blocks

Loads on blocks

Figure 1

1 2 3 4

Table 1

5 6 7 8 9 10 11 12 13 14 15 123

16

Blocks

Lifting with multiple line parts

2 parts of line

4 parts of line

5 parts of line

6 parts of line

Method of reeving tackle blocks will vary with the application. With heavy lifting systems where blocks with multiple sheaves are needed the number of blocks has to be determined. This is done for a given load that needs to be lifted, by calculating the number of parts of line as follows:

1 2

L = load to be lifted in t P = single line pull in t R = ratio

3

L R= P

4 5 6 7 8 9

number of parts of line

bronze bushed sheaves

 1  2  3  4  5  6  7  8  9 10 11 12

0.96 1.87 2.75 3.59 4.39 5.16 5.90 6.60 7.27 7.91 8.52 9.11

roller bearing sheaves

0.98 1.98 2.88 3.81 4.71 5.60 6.47 7.32 8.16 8.98 9.79 10.6

Table 2

10

Example: L = 16 t P=3t How many parts of line are needed?

11

L R= = P

12

16 = 5.3 3

Refer to ratio 5.3 in table 2 or the next larger number nearest to it, and then check the column under the header “number of parts of line” For blocks with roller bearing sheaves this results in 6 parts of line that should be used to lift a 16 t load with a line pull of 3 t.

13 14 15 16

3 parts of line

124

type 601S, with Green Pin® Shackle • Material : carbon steel, fitted with conical roller bearings, except for blocks with WLL 2 t and 4 t, these are equipped with bronze bushes • Safety factor : MBL equals 4 x WLL • Finish : painted • Certification : test certificates can be supplied upon request • Note : Working Load Limit is on the headfitting

P-6951

working load limit

diameter wire rope

length

width

width outside

mm

diameter outside sheave a mm

t

b mm

c mm

d mm

2 4 4 8 12 8 12 15 4 12 8 12 15 8 8 12 15 8 12 15 8 12 15 8 12 15 8 12 15

kg

 7- 9 10 - 12 12 - 14 14 - 16 14 - 16 20 - 22 20 - 22 24 - 26 10 - 12 14 - 16 20 - 22 20 - 22 24 - 26 14 - 16 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26

 75 115 152 152 152 152 152 152 203 203 203 203 203 254 254 254 254 305 305 305 357 357 357 406 406 406 457 457 457

293 363 417 477 555 477 555 585 478 580 526 580 646 582 582 680 705 612 745 771 662 770 798 712 820 848 762 878 898

 79 107 107 124 154 124 154 170 107 154 124 154 170 124 124 154 170 124 154 170 124 154 170 124 154 170 124 154 170

 82 120 160 160 160 160 160 160 210 210 210 210 210 260 260 260 260 310 310 310 360 360 360 410 410 410 460 460 460

3.8 6.1 9.5 12.6 25 14.6 25 30 12 27.5 16 32 35 19.5 18 39 43 27 53 55 31 60 63 35 67 70 42 75 78

Blocks

Green Pin® Snatch blocks

weight each

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 125

16

Blocks

Snatch blocks

type 601H, with hook • Material : carbon steel, fitted with conical roller bearings, except for blocks with WLL 2 t and 4 t, these are equipped with bronze bushes • Safety factor : MBL equals 4 x WLL • Finish : painted • Certification : test certificates can be supplied upon request • Note : Working Load Limit is on the headfitting

P-6952

1 2 3 4 5

working load limit

diameter wire rope

length

thickness

width outside

mm

diameter outside sheave a mm

t

 2  4  4  8 12 15  4  8 12 15  8 12 15  8 12 15  8 12 15  8 12 15  8 10 15

weight each

b mm

c mm

d mm

kg

 7- 9 10 - 12 12 - 14 20 - 22 20 - 22 24 - 26 10 - 12 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26 20 - 22 20 - 22 24 - 26

 75 115 152 152 152 152 203 203 203 203 254 254 254 305 305 305 357 357 357 406 406 406 457 457 457

292 343 384 445 572 587 435 495 622 638 546 673 689 597 724 740 648 775 791 699 825 841 749 876 892

 57  83  83 108 127 127 83 108 127 127 108 127 127 108 127 127 108 127 127 108 127 127 108 127 127

 82 120 160 160 160 160 210 210 210 210 260 260 260 310 310 310 360 360 360 410 410 410 460 460 460

4 6.1 6 11.8 23 23 8 16.9 25 26 19 28 28 23 31 31 31 33 33 36 36 36 40 42 43

6 7

Snatch blocks type 601T

8 9 P-6953

10 11 12 13 14 15 16

126

• Material : carbon steel, fitted with conical roller bearings, except for blocks with WLL 4 t, these are equipped with bronze bushes • Safety factor : MBL equals 4 x WLL • Finish : painted • Certification : test certificates can be supplied upon request • Note : Working Load Limit is on the headfitting working load limit

diameter wire rope

length

thickness

width outside

mm

diameter outside sheave a mm

t

4 8 8 8

weight each

b mm

c mm

d mm

kg

10 - 12 20 - 22 20 - 22 20 - 22

115 152 203 254

213 305 357 406

 83 108 108 108

120 160 210 260

 4  9 12 16

Blocks

Galvanized malleable iron blocks

with eye, one sheave, for use with wire or fibre rope • • • • •

G-6917

Material Safety factor Finish Certification Note

: : : : :

working load limit

diameter rope

t

0.4 0.8 1 2 2.2 2.6 3 3.6

galvanized malleable iron MBL equals 4 x WLL hot dipped galvanized test certificates can be supplied upon request Working Load Limit is on the headfitting

length

length

diameter

thickness

width inside

length inside

weight each

mm

a mm

b mm

c mm

d mm

e mm

f mm

kg

12 16 18 24 28 30 32 34

164 232 270 340 350 390 420 460

118 158 178 233 246 280 314 350

 45  62  82  98 111 136 159 174

39 45 49 60 64 68 75 75

14 18 24 30 30 30 44 44

25 37 52 59 59 59 70 70

0.7 1.4 1.8 3.7 4.9 7.2 10.8 12.6

1 2 3 4 5 6 7

Galvanized malleable iron blocks

with hook, one sheave, for use with wire or fibre rope G-6918

• • • • •

Material Safety factor Finish Certification Note

working load limit

: : : : :

diameter rope

8

galvanized malleable iron MBL equals 4 x WLL hot dipped galvanized test certificates can be supplied upon request Working Load Limit is on the headfitting

9 10

length

length

diameter

thickness

width inside

b mm

c mm

d mm

e mm

kg

118 158 173 233 246 280 314 350

 45  62  82  98 111 136 159 174

39 45 49 60 64 68 75 75

24 28 28 30 30 30 48 48

0.9 1.5 2 3.8 5.1 7.7 11.4 13.5

t

mm

a mm

0.4 0.8 1 2 2.2 2.4 3 3.6

12 16 18 24 28 30 32 34

203 262 278 346 388 415 450 492

weight each

11 12 13 14 15 127

16

Blocks

Galvanized malleable iron blocks

with eye, two sheaves, for use with wire or fibre rope • • • • •

Material Safety factor Finish Certification Note

: : : : :

working load limit

diameter rope

t

length

length

diameter

thickness

width inside

length inside

mm

a mm

b mm

c mm

d mm

e mm

f mm

kg

12 16 18 24 28 30 32 34

164 232 270 340 350 390 420 460

118 158 175 233 246 280 314 350

 45  62  82  98 111 136 159 174

 62  70  74 102 112 119 130 130

14 18 24 30 30 30 44 44

25 37 52 59 59 59 70 70

1.2 2.1 3.1 6.0 7.4 9.0 16.2 18.3

G-6922

0.4 0.9 1.1 2 2.3 2.6 3 3.6

galvanized malleable iron MBL equals 4 x WLL hot dipped galvanized test certificates can be supplied upon request Working Load Limit is on the headfitting weight each

1 2 3 4 5 6 7

Galvanized malleable iron blocks

with hook, two sheaves, for use with wire or fibre rope

8 9

G-6923

10 11 12 13 14 15 16

128

• • • • •

Material Safety factor Finish Certification Note

: : : : :

working load limit

diameter rope

t

0.4 0.9 1.1 2 2.3 2.6 3 3.6

galvanized malleable iron MBL equals 4 x WLL hot dipped galvanized test certificates can be supplied upon request Working Load Limit is on the headfitting length

length

diameter

thickness

width inside

weight each

mm

a mm

b mm

c mm

d mm

e mm

kg

12 16 18 24 28 30 32 34

203 262 278 346 388 415 450 492

118 158 175 233 246 280 314 350

 45  62  82  98 111 136 159 174

 62  70  74 102 112 119 130 130

24 28 28 30 30 30 48 48

1.3 2.3 3.3 6.2 7.6 11.3 16.8 19.3

Blocks

Galvanized malleable iron blocks

with eye, three sheaves, for use with wire or fibre rope • • • • •

Material Safety factor Finish Certification Note

: : : : :

working load limit

diameter rope

t

0.6 1 1.5 3 3.9 5.4

galvanized malleable iron MBL equals 4 x WLL hot dipped galvanized test certificates can be supplied upon request Working Load Limit is on the headfitting length

length

diameter

thickness

width inside

length inside

mm

a mm

b mm

c mm

d mm

e mm

f mm

kg

12 16 18 24 28 30

170 229 287 342 392 485

120 154 190 235 284 350

 45  62  82  98 136 174

 83  90 103 133 155 166

14 18 24 30 30 44

25 37 52 59 59 70

1.5 2.6 4.1 7.8 14.5 25

G-6927

weight each

1 2 3 4 5 6 7

Galvanized malleable iron blocks

with hook, three sheaves, for use with wire or fibre rope G-6928

• • • • •

Material Safety factor Finish Certification Note

: : : : :

working load limit

diameter rope

t

0.6 1 1.5 3 3.9 5.4

8

galvanized malleable iron MBL equals 4 x WLL hot dipped galvanized test certificates can be supplied upon request Working Load Limit is on the headfitting

9

length

length

diameter

thickness

width inside

weight each

mm

a mm

b mm

c mm

d mm

e mm

kg

12 16 18 24 28 30

205 259 294 348 397 510

120 154 190 235 284 350

 45  62  82  98 136 174

 83  90 103 133 155 166

24 28 28 30 30 48

1.6 2.7 4.3 8.1 14.7 26.2

10 11 12 13 14 15 129

16

Blocks

American pattern cargo blocks with eye, one sheave • • • • •

P-6916

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

130

Material

: carbon steel sheave with taper roller bearing : MBL equals 4 x WLL : painted : test certificates can be supplied upon request : Working Load Limit is on the headfitting

Safety factor Finish Certification Note working load limit

diameter wire rope

length

diameter

thickness

width inside

length inside

t

 4  6  6 10 10 20 32 40

weight each

mm

a mm

b mm

c mm

d mm

e mm

kg

10 - 13 20 - 22 20 - 22 20 - 22 20 - 24 24 - 26 26 - 28 26 - 28

 437  512  610  750  840 1040 1018 1095

156 200 260 305 355 410 430 460

 82 104 130 165 165 190 192 210

35 35 40 54 54 73 73 73

 75  75  85 125 125 170 170 170

 11  20  27  40  55 100 125 150

Blocks 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 131

16

General Hardware

Applications General hardware items, such as carabine hooks, quick links and s-hooks, are suitable for many different applications in various market segments like agriculture, industry, transportation, etc.

Range Van Beest offers a wide range of general hardware products such as: • Two types of quick links ranging from 3,5 up to 16 mm; • Carabine hooks in four different types ranging from 4 up to 14 mm; • Split pins from 2.5 up to 20 mm; • Spring pins from 2 up to 8 mm; • Linch pins from 4.5 up to 11 mm; • Green Pin® RFID tag; • Chain repair links from 3 up to 12 mm; • S-hooks from 3 up to 8 mm.

Design General hardware items are typically designed for multiple purpose usage.

Finish

1

General hardware items are electro-galvanized.

2

Certification All general hardware can be supplied with test certificates upon request.

3

Instructions for use

4

Items should be inspected before use to ensure that:

5

• items are free from nicks, gouges and cracks; • the item is not used for lifting, general hardware items are not suitable for lifting applications; • never repair or reshape an item by welding, heating or bending as this may affect its performance.

6

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the products are used in severe operating conditions.

7 8 9 10 11 12 13 14 15 16

132

General Hardware

Quick links standard type • Material • Finish

E-7300

: mild steel : electro-galvanized

diameter

width inside

length inside

opening

minimum breaking load

a mm

b mm

c mm

d mm

kg

3.5 4 5 6 7 8 9 10 12 14 16

10 11 13 14 16 17 17 20 23 26 29

 29  32  39  46  51  59  64  70  83  97 112

 5  5  6  7  8 10 11 12 14 17 20

 240  300  540  750 1125 1500 2000 2400 3600 5000 6000

weight per 100 pcs kg

0.9 1.3 2 3.3 5.3 7.5 10.3 13 25 35 50

1 2 3 4 Quick links

5

with enlarged opening • Material • Finish

E-7310

6

: mild steel : electro-galvanized

diameter

width inside

length inside

opening

minimum breaking load

a mm

b mm

c mm

d mm

kg

kg

 4  5  6  7  8  9 10 12 14 16

12 14 16 17 19 20 22 25 28 31

 45  52  58  65  73  79  88 102 114 129

11 13 14 16 17 19 20 23 26 29

  800  1250  1750  2500  3250  4000  5000  6250 10000 12500

1.4 2.5 4.2 6.7 9.4 13.1 17.5 28.2 45.6 60.7

7

weight per 100 pcs

8 9 10 11 12 13 14 15 133

16

General Hardware

Carabine hooks standard type • Material • Finish

E-7200

1

: mild steel : electro-galvanized

diameter

length

width

width inside

width inside

width opening

minimum breaking load

weight per 100 pcs

a mm

b mm

c mm

d mm

e mm

f mm

 4  5  6  7  8  9 10 11 12 13 14 15

 40  50  60  70  80  90 100 120 140 160 180 200

14 16 18 22 24 26 30 36 40 44 48 60

 5  7  7  9 11 11 12 14 16 20 20 20

 7  8  9 10 12 12 15 18 20 22 22 22

kg

kg

 6  6  7  8  9 10 11 15 19 24 28 35

 100  120  180  300  330  460  600  680  800  860 1370

0.6 0.8 1.6 2.6 4.4 6.4 9.3 12.5 19.5 25 35 57.2

f

2 3 4 Carabine hooks

5

with pressed thimble

6

• Material • Finish

: mild steel : electro-galvanized

7

diameter

length

8

a mm

 4  5  6  7  8  9 10 11 12 13 14

9

E-7210

10 11 e

12 13 14 15 16

134

width

width opening

b mm

diameter inside thimble c mm

minimum breaking load

weight per 100 pcs

d mm

e mm

 40  50  60  70  80  90 100 120 140 160 180

 4  5  6  7 10 12 13 13 15 17 17

14 16 18 22 24 26 30 36 40 44 48

kg

kg

 6  6  7  8  9 10 11 15 19 24 28

100 120 180 300 330 460 600 680 800 860

0.8 1.6 2.6 4.4 6.4 9.3 12.5 19.5 25 35 50

General Hardware

Carabine hooks with screw nut • Material • Finish

E-7220

: mild steel : electro-galvanized

diameter

length

width inside

width inside

minimum breaking load

a mm

b mm

c mm

d mm

kg

 4  5  6  7  8  9 10 11 12 13 14

 40  50  60  70  80  90 100 120 140 160 180

 4  5  6  7 10 12 13 13 15 17 17

 7  7  8 10 12 12 15 16 19 28 28

100 120 180 300 330 460 600 680 800 860

weight per 100 pcs kg

1.7 1.9 2.9 4.6 6.9 10.3 13.4 19 26.5 37 52

1 2 3 4 Carabine hooks

5

with pressed thimble and screw nut • Material • Finish

E-7230

6

: mild steel : electro-galvanized

diameter

length

minimum breaking load

b mm

diameter inside thimble c mm

a mm

 4  5  6  7  8  9 10 11 12 13 14

kg

kg

 40  50  60  70  80  90 100 120 140 160 180

 4  5  6  7  9 10 11 12 13 15 17

100 120 180 300 330 460 600 680 800 860

0.8 1.6 2.6 4.4 6.4 9.3 12.5 19.5 25 35 50

7

weight per 100 pcs

8 9 10 11 12 13 14 15 135

16

General Hardware

Split pins

standard type • Material • Finish

E-7950

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

136

: mild steel : electro-galvanized diameter

length

weight per 100 pcs

a mm

b mm

kg

2.5 4 5 6 8 8 10 10 10 10 12 12 12 13 16 16 20 20

 20  32  36  45  63  80  71  90 100 120 140 160 180 110 160 200 230 265

0.08 0.3 0.6 1.2 2.8 4.4 5 6 6.6 4.4 7 7 7 12.1 16 20 30 17.6

axb mm

G-4163 WLL t

G-4153 WLL t

P-6036 WLL t

G-6038 WLL t

for shackle P-6033 WLL t

G-5263 WLL t

G-5163 WLL t

2.5 x 20

0.5 0.75 1 1.5

4 x 32

2 3.25

2 3.25

3.3 5

2 3.25

5 x 36

4.75 6.5

4.75 6.5

7 9.5

4.75 6.5

6 x 45

8 x 63

8.5 9.5 12 13.5 17

8.5 9.5 12 13.5 17

18

8 x 80

P-6031 WLL t

G-4263 WLL t

General Hardware

Split pin

4.75

12.5 15 18 21 30

8.5 9.5 12 13.5 17

6.5 8.5 9.5 12 16

30 40

1 2 3

10 x 71

25 35

25 35

40 55

25 35

25 30

10 x 90

42.5 55

42.5 55

85

42.5 55

55

4

10 x 100

85

85

85

75

5

55 75

10 x 120

125

12 x 140

150 200

12 x 160

250

12 x 180

300

120

6 7 8

13 x 110

120 150

16 x 160

200 250 300 400 500

200 250 300 400 500

600 700 800 900 1000

600 700 800 900 1000

16 x 200

20 x 230

20 x 265

120

150 175

9

120 150

10 11 12 13 14 15 137

16

General Hardware

Spring pins single type • Material • Finish

: mild steel : electro-galvanized

diameter

length

diameter

diameter

a mm

b mm

c mm

d mm

kg

2 3 4 5 6 7 8

 50  60  60  85 105 105 110

10 18 20 24 30 30 28

  9 - 14 10 - 16 16 - 20 20 - 28 28 - 40 28 - 45 30 - 45

0.3 0.9 1.6 3.3 6.2 8.3 10.5

E-7930

Spring pin axb mm

1

weight per 100 pcs

for shackle G-4163 WLL t

G-4153 WLL t

P-6033 WLL t

G-5263 WLL t

G-5163 WLL t

2 x 50

2

2

3.3

2

2

3 x 60

3.25

3.25

5

3.25

3

4 x 60

4.75 6.5

4.75 6.5

7 9.5

4.75 6.5

4

5 x 85

5

6 x 105

6

7 x 105

7 8 9 10 11 12 13 14 15 16

138

G-4263 WLL t

4.75

8.5 9.5 12 13.5 17

8.5 9.5 12 13.5 17

18

12.5 15 18 21 30

8.5 9.5 12 13.5 17

6.5 8.5 9.5 12 16

25

25

30 40

40

25

25

General Hardware

Spring pins double type • Material • Finish

: mild steel : electro-galvanized

diameter

length

diameter

diameter

a mm

b mm

c mm

d mm

2 3 4 5 6 7 8

 50  62  78  92 120 150 130

10 16 23 26 30 30 30

8 - 14 14 - 20 17 - 24 18 - 30 24 - 36 45 - 56 24 - 45

E-7931

Spring pin axb mm

G-4163 WLL t

G-4153 WLL t

for shackle P-6033 G-5263 WLL WLL t t

G-5163 WLL t

2 x 50

2

2

3.3

2

3 x 62

3.25

3.25

5

3.25

4 x 78

4.75 6.5 8.5 9.5 12

4.75 6.5 8.5 9.5 12

7 9.5 12.5 15 18

4.75 6.5 8.5 9.5 12

13.5 17

13.5 17

21 30

13.5 17

35 42.5 55 25

35 42.5 55 25

55 75

55 85

30 40

40

35 42.5 55 25

5 x 92

6 x 120

7 x 150

8 x 130

18

weight per 100 pcs kg

G-4263 WLL t

0.4 1.4 3 5.3 9.6 13.5 17.8

G-4263 WLL t

P-5363 WLL t

1 2

4.75

3

4.75

4

6.5 8.5 9.5 12 16

6.5 8.5 9.5 12 16

17

5

30 50

30 50

55 85

6

25

25

25

7 8 9 10 11 12 13 14 15 139

16

General Hardware

Linch pins

with round spring ring • Material • Finish

: mild steel : electro-galvanized

diameter pin

diameter spring ring

a mm

4.5 6 7 8 9 10 11

E-7940

length pin

b mm

width inside spring ring c mm

d mm

kg

2 3.4 3.4 3.4 3.4 3.4 3.4

41 41 41 41 41 41 41

42 42 42 42 42 42 42

2 2.8 3 3.5 3.8 4.4 4.6

Linch pin

1

diameter mm

4.5

2

6

3

8

4 5 6 7 8 9 10 11 12 13 14 15 16

140

weight per 100 pcs

for shackle G-4163 WLL t

G-4153 WLL t

P-6033 WLL t

G-5263 WLL t

G-5163 WLL t

4.75 6.5 8.5 9.5 12

4.75 6.5 8.5 9.5 12

18

7 9.5 12.5 15 18

4.75 6.5 8.5 9.5 12

13.5 17

13.5 17

30

21 30

13.5 17

G-4263 WLL t

4.75 6.5 8.5 9.5

12 16

I

Green Pin® RFID Tag • Material • Finish

TAGRFID

General Hardware

P

OCHI NF

: stainless steel : polymer

length

width

diameter

diameter

weight per 100 pcs

a mm

b mm

c mm

d mm

kg

53

33

12

4

1.8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 141

16

General Hardware

Chain repair links commercial quality • Material • Finish

E-7910

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

142

: mild steel : electro-galvanized

diameter

width inside

length inside

opening

weight per 100 pcs

a mm

b mm

c mm

d mm

kg

3 4 4.5 5 5.5 6 6.5 7 8 9 10 12

6.5 8 9 9.5 10.5 10.5 11.5 13.5 15 16.5 17 25

16.5 20 22 23 26 29 30 32 37 37.5 37.5 50

4 5.5 6 6 6 7 8 8.5 9 9 9 12

0.4 0.8 1.1 1.2 1.8 2.1 3.2 3.9 5.6 7.6 9.5 10

General Hardware

S-hooks

standard type • Material • Finish

E-7920

: mild steel : electro-galvanized

diameter

length

opening

weight per 100 pcs

a mm

b mm

c mm

kg

3 4 5 6 7 8

25 35 45 55 65 75

 6  8  9 10 17 20

0.3 0.8 1.3 2.4 4.3 6.9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 143

16

Stainless Steel Products

Applications Specially in circumstances where corrosion can cause problems, the use of stainless steel products is recommended.

Range Van Beest offers a wide range of stainless steel items like shackles, thimbles, wire rope clips, eye bolts, rigging screws etc. Van Beest can also offer other stainless steel chain fittings. Please see our Excel® catalogue for more information.

1

Design

2

Items supplied by Van Beest are all manufactured from stainless steel quality AISI 316, except for some product groups that are manufactured from AISI 304, this concerns R-7856, R-7850, R-7852 and R-7854.

3

Most stainless steel items have an equivalent in a regular steel quality, we refer to the specific chapters for further design details.

4

Finish All stainless steel items are polished.

5

Instructions for use

6

We refer to the previous product chapters in this catalogue for details on use of a specific item. In general, items should be inspected before use to ensure that:

7

- all markings are legible; - the item is free from nicks, gouges and cracks; - never repair or reshape an item by welding, heating or bending as this may affect the strength.

8

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the products are used in severe operating conditions.

9 10 11 12 13 14 15 16

144

bow shackles with screw pin

R-7825

• Material : AISI 316 • Safety factor : MBL equals 6 x WLL • Standard : generally to DIN 82103 • Finish : polished • Note : marked with WLL, CE and manufacturer identification symbol (VBS), except for 4 mm as it is too small working load limit

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

t

a mm

b mm

c mm

d mm

e mm

f mm

0.12 0.15 0.3 0.4 0.6 1 1.5 2 3 3.5

 4  5  6  8 10 12 16 20 22 25 28

 4  5  6  8 10 12 16 20 22 25 28

 8 10 12 16 20 24 32 40 44 50 54

 8 10 12 16 20 24 32 40 44 50 56

 16  20  24  32  40  48  64  80  88 100 116

12 15 18 24 30 36 48 60 66 75 86

weight per 100 pcs kg

1.2 1.8 2.8 6.4 15 22 55 97 146 211 285

Stainless Steel Products

Shackles

1 2 3 4 5

Shackles

bow shackles with safety bolt • • • • R-7827

Material Safety factor Finish Note working load limit

: : : :

6

AISI 316 MBL equals 6 x WLL polished marked with WLL, CE and manufacturer identification symbol (VBS)

7

diameter bow

diameter pin

diameter eye

width inside

length inside

width bow

weight per 100 pcs

t

a mm

b mm

c mm

d mm

e mm

f mm

kg

0.3 0.4 0.6 1 1.2 3

 8 10 12 16 19 25

 8 10 12 16 19 25

16 19 24 31 38 49

16 20 25 32 38 50

 32  40  49  64  80 100

24 30 36 48 60 75

7.2 13.4 23 56.6 95.2 218

8 9 10 11 12 13 14 15

145

16

Stainless Steel Products

Shackles

dee shackles with screw pin

R-7821

• Material : AISI 316 • Safety factor : MBL equals 6 x WLL • Standard : generally to DIN 82102 • Finish : polished • Note : marked with WLL, CE and manufacturer identification symbol (VBS), except for 4 mm as it is too small working load limit

1

diameter bow

diameter pin

diameter eye

width inside

length inside

t

a mm

b mm

c mm

d mm

e mm

0.12 0.15 0.3 0.4 0.6 1 1.5 2 3 3.5

 4  5  6  8 10 12 16 20 22 25 28

 4  5  6  8 10 12 16 20 22 25 28

 8 10 12 16 20 24 32 40 44 50 54

 8 10 12 16 20 24 32 40 44 50 56

 16  20  24  32  40  48  64  80  88 100 106

weight per 100 pcs kg

1.1 1.6 2.4 5.6 13 20 48 84 127 184 250

2 3 4 5

Shackles

dee shackles with safety bolt

6

• • • •

7 R-7823

8 9 10 11 12 13 14 15 16

146

Material Safety factor Finish Note working load limit

: : : :

AISI 316 MBL equals 6 x WLL polished marked with WLL, CE and manufacturer identification symbol (VBS)

diameter bow

diameter pin

diameter eye

width inside

length inside

t

a mm

b mm

c mm

d mm

e mm

0.3 0.4 0.6 1 1.5 3

 8 10 12 16 19 25

 8 10 12 16 19 25

16 19 24 31 38 49

16 20 25 32 38 50

32 40 48 64 76 95

weight per 100 pcs kg

7.2 13.2 22.5 56 95.2 205

Stainless Steel Products

Shackles

long dee type • Material • Finish

R-7829

: AISI 316 : polished

diameter bow

diameter pin

diameter eye

width inside

length inside

weight per 100 pcs

a mm

b mm

c mm

d mm

e mm

kg

 4  5  6  8 10 12

 4  5  6  8 10 12

 8 10 12 16 20 24

 8 10 12 16 20 24

30 37 45 60 75 90

 1  2  4  9 20 32

1 2 3 4 5

Shackles

short twisted type • Material • Finish

6

: AISI 316 : polished

7

R-7822 diameter bow

diameter pin

diameter eye

width inside

length inside

weight per 100 pcs

a mm

b mm

c mm

d mm

e mm

kg

 5  6  8 10 12

 5  6  8   9.5 12

10 12 16 19 24

10 12 16 20 24

36 42 56 60 72

 2  4  9 11 32

8 9 10 11 12 13 14 15 147

16

Stainless Steel Products

Thimbles heavy type • Material • Finish

R-7860

1 2

: AISI 316 : polished

width groove

width inside

length inside

length

thickness

a mm

b mm

c mm

d mm

e mm

2 2.5 3 4 5 6 7 8 10 12 14 16 18 20 22 24 26

9 9.5 10 11 13 16 18 20 26 28 34 37 42 45 50 58 66

15 15.7 16 17 20 25 28 32 40 45 56 62 65 78 88 96 105

 23  24  25  28  32  39  40  49  55  70  80  85  95 115 125 135 140

weight per 100 pcs kg

1 1 1 1 1 1.2 1.2 1.4 1.9 2 2.2 2.5 2.5 3 3 4 4

0.2 0.2 0.4 0.5 0.6 1 1.2 1.8 2.9 4.6 7.3 9.7 16.5 21.3 22.3 40.5 49.7

3 4 Wire rope clips

5

generally to DIN 741

6

• Material • Standard • Finish

7 R-7863

8

diameter wire rope

9 10 11 12 13 14 15 16

: Bridge : AISI 316 Nuts : AISI 316 U-bolt : AISI 316 : formerly DIN 741 : polished

148

diameter

length bow

width inside

length thread

length base

thickness base

height base

weight per 100 pcs

mm

a mm

b mm

c mm

d mm

e mm

f mm

g mm

kg

 3  4  5  6  8 10 13 16 19 22 26

 4  4  5  5  6  8 10 12 12 14 14

20 22 24 28 34 42 55 63 75 85 95

 9  9 11 13 16 19 24 29 32 37 41

12 12 13 15 19 22 30 33 38 44 45

21 21 23 26 30 34 42 50 54 61 65

10 10 11 12 14 18 23 26 29 33 35

10 10 10 11 15 17 21 26 30 34 37

1.4 1.4 1.5 2.1 4.1 6.8 13 21 28 40 44

Hook - Hook • Material • Finish diameter thread

R-7837

: AISI 316 : polished length open position c mm

length body

length

length

opening hook

thickness

a mm

length closed position b mm

d mm

e mm

f mm

g mm

h mm

kg

M 5 M 6 M  8 M 10 M 12 M 16 M 20

120 150 200 240 310 390 440

170 210 290 355 470 590 675

 70  90 120 150 200 250 300

 58  73  98 117 157 186 214

 33  43  56  71  95 116 139

 5  6  8  9 11 15 19

0.04 0.08 0.16 0.27 0.51 1.2 1.9

8 9 11 12 14 16 18

weight each

Stainless Steel Products

Open body rigging screws

1 2 3 4 Open body rigging screws

5

Hook - Eye • Material • Finish

6

: AISI 316 : polished

7 diameter thread

R-7838

diameter eye inside k mm

weight each

8

i mm

diameter eye outside j mm

kg

 5  6  8  9 11 15 19

17 21 28 34 40 54 64

 8 10 14 16 18 26 30

0.04 0.08 0.16 0.27 0.51 1.2 1.9

9

length open position c mm

length body

length

length

length

opening hook

thickness

a mm

length closed position b mm

d mm

e mm

f mm

g mm

h mm

M 5 M 6 M 8 M 10 M 12 M 16 M 20

120 150 200 240 310 390 440

170 210 290 355 470 590 675

 70  90 120 150 200 250 300

 58  73  98 117 157 186 214

 56  71  95 118 154 190 220

 33  43  56  71  95 116 139

8 9 11 12 14 16 18

10 11 12 13 14 15

149

16

Stainless Steel Products

Open body rigging screws Eye - Eye • Material • Finish diameter thread

R-7839

: AISI 316 : polished length open position c mm

length body

length

length

a mm

length closed position b mm

diameter eye inside h mm

weight each

f mm

diameter eye outside g mm

d mm

e mm

M 5 M 6 M 8 M 10 M 12 M 16 M 20

120 150 200 240 310 390 440

170 210 290 355 470 590 675

 70  90 120 150 200 250 300

 56  71  95 118 154 190 220

 33  43  56  71  95 116 139

17 21 28 34 40 54 64

 8 10 14 16 18 26 30

0.04 0.08 0.16 0.27 0.51 1.2 1.9

kg

1 2 3 4 Closed body rigging screws

5

Jaw - Jaw

6

• Material • Finish

: AISI 316 : polished

7

diameter thread

length open

length closed

length body

diameter pin

8

a mm

b mm

c mm

d mm

M 5 M 6 M 8 M 10 M 12 M 14 M 16 M 20

190 210 240 270 360 385 450 450

125 155 180 220 255 270 320 355

 80  95 105 125 150 165 190 210

9 R-7830

10 11 12 13 14 15 16

150

weight per 100 pcs

e mm

width jaw inside f mm

5.2 6.2 8.7 9.7 12.7 12.7 16 19

6 7.5 10 12 14 14 16 20

6.5 8.1 13.9 25.3 57.3 64 94.2 145

kg

swage type • Material • Finish diameter wire rope

R-7834

: AISI 316 : polished diameter inside

diameter outside

diameter pin

length

length inside

width jaw

weight per 100 pcs

mm

a mm

b mm

c mm

d mm

e mm

f mm

kg

3 4 5 6 7 8 9.5 10 12

3.3 4.3 5.3 6.6 7.5 8.3 10 10.5 12.5

6.3 7.5 9 12.5 14.2 16 17 17.8 20

5.2 6.2 8.7 9.7 12.6 14.6 16.5 16.5 19

 65  77  88 106 116 145 150 150 204

 32  40  57  63  70  85  87  89 105

7.5 10 12 14 14.5 16 17 17 25

2.3 4.9 7.2 13.9 18.1 21.6 48 52 67

Stainless Steel Products

Fork terminals

1 2 3 4 Eye terminals

5

swage type • Material • Finish diameter wire rope

R-7835

6

: AISI 316 : polished diameter inside

diameter outside

length inside

length

diameter eye outside f mm

thickness eye

d mm

diameter eye inside e mm

mm

a mm

b mm

c mm

 3  4  5  6  8 10

 3.3  4.3  5.3  6.3  8.3 10.3

6.5 7.5 9 12.5 16 17.5

36 39 50 62 85 90

weight per 100 pcs

g mm

kg

 62  71  88 104 126 150

8 10 12 12.5 14.5 16.4

14 19 23 28 32 36

 4  6  7  8 10 12

1.3 2.3 4 8.8 15.4 22.8

7 8 9 10 11 12 13 14 15

151

16

Stainless Steel Products

Threaded terminals swage type • Material • Finish diameter wire rope

R-7836

: AISI 316 : polished thread

diameter inside

diameter outside

length

length inside

weight per 100 pcs

mm

a mm

b mm

c mm

d mm

e mm

kg

 3  4  5  6  8 10

M 6 M 8 M 10 M 12 M 16 M 20

 3.3  4.3  5.3  6.3  8.3 10.3

6.3 7.5 9 12 16 18

100 117 130 162 195 230

39 45 51 64 76 89

2.7 5.4 7.8 15.1 23.2 59

1 2 3 4 5 6

Swivels Eye - Eye

7

• Material • Finish

8 9 10

R-7877

11 12 13 14 15 16

152

: AISI 316 : polished

diameter

length

length inside

width outside

width inside

weight per 100 pcs

a mm

b mm

c mm

d mm

e mm

kg

 5  6  8 10 13 16 19

 60  65  90 115 154 188 229

13 15 22 27 35 45 50

23 26 35 44 57 71 84

13 15 20 24 32 39 41

3.4 5.1 13.1 26 58 105 220

generally to DIN 580

R-7840

• Material • Standard • Finish

: AISI 316 : generally to DIN 580 : polished

diameter thread

diameter base

diameter eye inside d mm

length thread

thickness base

height

b mm

diameter eye outside c mm

a mm

M 6 M 8 M 10 M 12 M 16 M 20 M 24

weight per 100 pcs

e mm

f mm

g mm

kg

20 20 25 30 35 40 45

36 36 45 54 63 72 90

20 20 25 30 35 40 45

13 13 17 20.5 27 30 36

 6  6  8 10 12 14 18

36 36 45 53 62 71 90

3 6 10.3 17.7 28 45 74

Stainless Steel Products

Eye bolts

1 2 3 4 5 6

Eye nuts

generally to DIN 582 R-7842

• Material • Standard • Finish

7

: AISI 316 : generally to DIN 582 : polished

diameter thread

diameter base

a mm

M 6 M 8 M 10 M 12 M 16

8 diameter eye inside d mm

thickness base

height

b mm

diameter eye outside c mm

weight per 100 pcs

e mm

f mm

kg

20 20 25 30 35

36 36 45 54 63

20 20 25 30 35

8.5 8.5 10 11 13

36 36 45 53 62

4.2 5.2 9.4 16 24

9 10 11 12 13 14 15 153

16

Stainless Steel Products

Quick links standard type • Material • Finish

R-7873

: AISI 316 : polished

diameter

width inside

length inside

opening

a mm

b mm

c mm

d mm

3.5 4 5 6 7 8 9 10 12

10 12 13 14 16 17 17 20 23

29 32 39 46 51 59 64 70 83

5 5.5 6.5 7.5 8.5 10.5 11.5 12.5 14.5

minimum breaking load kg

 155  450  585  790 1085 1380 1790 2085 2265

weight per 100 pcs kg

0.9 1.3 2 3.3 5.3 7.5 10.3 13 22.5

1 2 3 4 Quick links

5

with enlarged opening

6

• Material • Finish

7 8

R-7874

9 10 11 12 13 14 15 16

154

: AISI 316 : polished

diameter

width inside

length inside

opening

minimum breaking load

weight per 100 pcs

a mm

b mm

c mm

d mm

kg

kg

3.5 5 6 8 10 12 14

10 14 16 18 20 23 27

 40  52  60  74  85  98 116

10 14 16 18 20 23 26

 155  585  790 1380 2085 2265 2540

 1.2  2.7  4.4 10.1 17.6 30.4 41.5

Stainless Steel Products

Carabine hooks standard type • Material • Finish

R-7872

: AISI 316 : polished

diameter

length

width inside

width inside

minimum breaking load

a mm

b mm

c mm

d mm

kg

 4  5  6  7  8  9 10 11 12 13 14

 40  50  60  70  80  90 100 120 140 160 180

 5  7  7  9 11 11 12 14 16 20 20

 7  8  9 10 12 12 15 18 20 22 22

 70 110 132 198 330 363 506 660 748 880 946

weight per 100 pcs kg

0.6 0.8 1.6 2.6 4.4 6.4 9.3 12.5 19.5 25 35

1 2 3 4 Carabine hooks

5

with pressed thimble • Material • Finish

R-7875

6

: AISI 316 : polished

diameter

length

width

b mm

diameter inside thimble c mm

a mm

 4  5  6  7  8  9 10 11 12 13 14

minimum breaking load

d mm

kg

kg

 40  50  60  70  80  90 100 120 140 160 180

 5  5  5  7 10 10 13 13 15 17 17

14 16 18 22 24 26 30 36 40 44 48

 70 110 132 198 330 363 506 660 748 880 946

0.8 1.6 2.6 4.4 6.4 9.3 12.5 19.5 25 35 50

7

weight per 100 pcs

8 9 10 11 12 13 14 15 155

16

Stainless Steel Products

Carabine hooks with screw nut • Material • Finish

R-7876

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

156

: AISI 316 : polished

diameter

length

width inside

width inside

minimum breaking load

weight per 100 pcs

a mm

b mm

c mm

d mm

kg

kg

 4  5  6  7  8  9 10 11 12 13 14

 40  50  60  70  80  90 100 120 140 160 180

 5  7  7  9 11 11 12 14 16 20 20

 7  8  9 10 12 12 15 18 20 22 22

 70 110 132 198 330 363 506 660 748 880 946

0.8 1.6 2.6 4.4 6.4 9.3 12.5 19.5 25 35 50

Stainless Steel Products

Split pins

standard type • Material • Finish

R-7856

: AISI 304 : polished diameter a mm

length b mm

weight per 100 pcs

2.5 4 5 6 8 8 10 10 10 10 12 12 12 13 16

 20  32  36  45  63  80  71  90 100 120 140 160 180 110 160

0.08 0.3 0.6 1.2 2.8 4.4 5 6 6.6 4.4 7 7 7 12.1 16

Split pin axb mm

  2.5 x 20

G-4163 WLL t

G-4153 WLL t

P-6036 WLL t

G-6038 WLL t

kg

for shackle P-6033 WLL t

G-5263 WLL t

G-5163 WLL t

2 3.25

3.3 5

2 3.25

  5 x 36

4.75 6.5

4.75 6.5

7 9.5

4.75 6.5

8.5 9.5 12 13.5 17

2 3

2 3.25

  8 x 63

G-4263 WLL t

0.5 0.75 1 1.5

  4 x 32

  6 x 45

P-6031 WLL t

1

8.5 9.5 12 13.5 17

18

  8 x 80

12.5 15 18 21 30

4 4.75

8.5 9.5 12 13.5 17

6.5 8.5 9.5 12 16

30 40

5 6 7 8

10 x 71

25 35

25 35

40 55

25 35

25 30

10 x 90

42.5 55

42.5 55

85

42.5 55

55

9

10 x 100

85

85

120

85

75

10

55 75

10 x 120

125

12 x 140

150 200

12 x 160

250

12 x 180

300

13 x 110

120 150

16 x 160

200 250 300

120

11 12 13 150 175

14

120 150

15

200 250 300

157

16

Stainless Steel Products

Safety pins double type • Material • Finish diameter a mm

length inside b mm

width inside c mm

weight per 100 pcs

2 3 4 5 6

 38  53  59  95 114

16 20 21 22 38

0.5 1.8 3.9 6.9 12.5

Safety pin

R-7850

diameter mm

2

3

1

4

2

5

3

6

4 5 6 7 8 9 10 11 12 13 14 15 16

: AISI 304 : polished

158

kg

for shackle G-4163 WLL t

G-4153 WLL t

4.75 6.5

4.75 6.5

P-6033 WLL t

G-5263 WLL t

7 9.5

8.5 9.5 12 13.5 17 25 35 42.5

8.5 9.5 12 13.5 17 25 35 42.5

 18

 40  55

55 85

55 85

 75 125

 30

12.5 15 18 21 30 40 55

85 120

G-5163 WLL t

G-4263 WLL t

4.75 6.5

4.75 6.5

8.5 9.5 12 13.5 17 25 35 42.5

8.5 9.5 12 16 25

55 85

65 75

30

single type • Material • Finish

: AISI 304 : polished

diameter a mm

length b mm

diameter c mm

diameter d mm

weight per 100 pcs

2 3 4 5 6 7 8

 50  60  60  85 105 105 110

10 18 20 24 30 30 28

  9 - 14 10 - 16 16 - 20 20 - 28 28 - 40 28 - 45 30 - 45

0.3 0.9 1.6 3.3 6.2 8.3 10.5

R-7852

Spring pin

kg

for shackle G-4163 WLL t

G-4153 WLL t

2

2

2

3.3

2

3

3.25

3.25

5

3.25

4

4.75 6.5

4.75 6.5

7 9.5

4.75 6.5

diameter mm

5

6

7

P-6033 WLL t

G-5263 WLL t

G-5163 WLL t

G-4263 WLL t

Stainless Steel Products

Spring pins

1 2

4.75

8.5 9.5 12 13.5 17

8.5 9.5 12 13.5 17

18

12.5 15 18 21 30

8.5 9.5 12 13.5 17

6.5 8.5 9.5 12 16

25

25

30 40

40

25

25

3 4 5 6 7 8 9 10 11 12 13 14 15 159

16

Stainless Steel Products

Spring pins double type • Material • Finish

: AISI 304 : polished

diameter a mm

length b mm

diameter c mm

diameter d mm

weight per 100 pcs

2 3 4 5 6 7 8

 50  62  78  92 120 130 130

10 16 23 26 30 30 30

  8 - 14 14 - 20 17 - 24 18 - 30 24 - 36 24 - 40 24 - 45

0.4 1.4 3 5.3 9.6 13.5 17.8

R-7854

Spring pin

kg

for shackle G-4163 WLL t

G-4153 WLL t

2

2

2

3.3

2

1

3

3.25

3.25

5

3.25

2

4

3

5

4.75 6.5 8.5 9.5 12

4.75 6.5 8.5 9.5 12

7 9.5 12.5 15 18

4.75 6.5 8.5 9.5 12

6

13.5 17

13.5 17

21 30

13.5 17

6.5 8.5 9.5 12 16

8

25

25

40

25

25

diameter mm

4 5 6 7 8 9 10 11 12 13 14 15 16

160

P-6033 WLL t

18

30 40

G-5263 WLL t

G-5163 WLL t

G-4263 WLL t

4.75

Stainless Steel Products

Short link chain generally to DIN 766 • Material • Standard

: AISI 316 : generally to DIN 766

diameter

R-7880

width outside c mm

weight per m

a mm

length inside b mm

 3  4  5  6  8 10

16 16 18.5 18.5 24 28

11 14 17 20 26 34

0.17 0.32 0.5 0.75 1.35 2.25

kg

1 2 3 4 Long link chain

5

generally to DIN 763 • Material • Standard

6

: AISI 316 : generally to DIN 763 width outside c mm

weight per m

7

a mm

length inside b mm

kg

 3  4  5  6  7  8 10

26 32 36 42 48 54 66

12 16 20 24 28 32 40

0.14 0.27 0.43 0.63 0.86 1.1 1.75

8

diameter

9 10

R-7890

11 12 13 14 15 161

16

Index by Chapter 162

1

Shackles

G-4161

Green Pin® Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

G-4163

Green Pin® Standard Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

G-4151

Green Pin® Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

G-4153

Green Pin® Standard Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

P-6036

Green Pin Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

G-6038

Green Pin® Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

P-6033

Green Pin® Sling Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

G-5263

Green Pin® Super Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

G-5163

Green Pin® Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

P-6031

Green Pin® Heavy Duty Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

G-4263

Green Pin Wide Mouth Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

P-5363

Green Pin® ROV Release Polar Shackles - with spring pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

P-5365

Green Pin® ROV Release Polar Shackles - with locking clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29

P-5367

Green Pin® ROV Spring Release Polar Shackles - spring loaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

G-4164

Green Pin® Trawling Shackles - bow shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

G-4154

Green Pin Trawling Shackles - dee shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

G-4169

Green Pin® Sunken Hole Shackles - bow shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . .

34

P-4170

Key for Green Pin® Sunken Hole Shackles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34

G-4159

Green Pin® Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . .

35

S-1165

Mooring Shackles - bow shackles with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

S-3466

Shackles generally to DIN 82016 type B - bow shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . .

37

G-3466

Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . .

37

S-3351

Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . .

38

G-3351

Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . .

38

S-3352

Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . .

38

G-3352

Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized . .

38

S-3356

Shackles generally to DIN 82101 type C - dee shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . .

39

G-3356

Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . .

39

G-3161

Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

G-3163

Yellow Pin Shackles - bow shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

G-3151

Yellow Pin Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

G-3153

Yellow Pin Shackles - dee shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

S-2761

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - self coloured . . . . . . . . . . .

42

E-2761

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized . . . . . . .

42

G-2761

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . .

42

S-2765

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - self coloured . . . . . . . . . . .

43

E-2765

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . .

43

G-2765

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized . . . .

43

S-2751

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - self coloured . . . . . . . . . . . .

44

E-2751

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized . . . . . . . .

44

G-2751

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized . . . .

44

S-2755

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - self coloured . . . . . . . . . . . .

45

E-2755

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . .

45

G-2755

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . .

45

S-1161

Commercial Shackles - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

E-1161

Commercial Shackles - bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

S-1164

Commercial Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

S-1162

Commercial Shackles - bow shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . .

47

E-1162

Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . .

47

S-1151

Commercial Shackles - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

E-1151

Commercial Shackles - dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

S-1154

Commercial Shackles - dee shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

S-1152

Commercial Shackles - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . .

49

E-1152

Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . .

49

S-1170

Commercial Shackles - danlino V shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

®

®

®

Thimbles

E-6110

Thimbles - standard commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51

G-6120

Thimbles - heavy duty stub-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51

G-6128

Thimbles - heavy duty stub-end, reinforced with welded plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

52

E-6131

Thimbles - generally to DIN 6899 (B) - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

G-6131

Thimbles - generally to DIN 6899 (B) - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

G-6133

Thimbles - generally to DIN 83311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

S-6134

Thimbles - generally to DIN 3091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

E-6135

Thimbles - generally to DIN 3090 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

G-6135

Thimbles - generally to DIN 3090 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

G-6170

Thimbles - generally to EN 13411-1 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

56

G-6142

Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . .

57

G-6151

Thimbles - pennant line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58

E-6180

Thimbles - for rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58

P-6190

Thimbles - tubular type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

P-6195

Thimbles - tubular type, with welded plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

3

Wire Rope Clips

G-6240

Green Pin® wire rope clips - generally to EN 13411-5 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63

E-6260

Wire rope clips - generally to EN 13411-5 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64

E-6220

Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

65

4

Sleeves

S-6500

Prescon sleeves - with colour code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

67

A-6550

Aluminium sleeves - for wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

5

Sockets

G-6411

Green Pin® sockets - closed spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6412

Green Pin® sockets - open spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

G-6422

Green Pin® sockets - open spelter socket with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . .

75

G-6413

Green Pin® sockets - open wedge socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

76

G-6423

Green Pin® sockets - open wedge socket with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . .

77

G-6416

Shortbow sockets - closed spelter socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

77

S-6414

Swage sockets - open type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

S-6415

Swage sockets - closed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

79

6

Turnbuckles

G-6313

Green Pin® turnbuckles Jaw - Jaw with cotter pin - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . .

82

G-6323

Green Pin® turnbuckles Jaw - Jaw with safety bolt - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . .

83

G-6333

Green Pin® Polar turnbuckles Jaw - Jaw with safety bolt - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . .

84

G-6311

Green Pin® turnbuckles Eye - Eye - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

85

G-6312

Green Pin® turnbuckles Hook - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

G-6315

Green Pin turnbuckles Eye - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

87

G-6314

Green Pin® turnbuckles Eye - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

88

E-6351

Rigging screws Eye - Eye - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

89

E-6352

Rigging screws Hook - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

89

E-6354

Rigging screws Eye - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

90

E-6353

Rigging screws Jaw - Jaw - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

90

E-6355

Rigging screws with Welding Ends - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

S-6330

Turnbuckles (hamburgers) - for deck lashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

G-6343

Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

92

G-6340

Closed body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

92

G-6345

Closed body rigging screws Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

93

7

Links

P-6860Y

Green Pin® connecting links - for connecting Grade 8 chain-slings - yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

95

P-6860R

Green Pin® connecting links - for connecting Grade 8 chain-slings - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

95

MS

Master links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

96

MTS

Master link assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

97

®

73

163

Index by Chapter

2

Index by Chapter 164

8

Swivels

G-7713

Green Pin® swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

99

G-7723

Green Pin® swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

100

P-7740

Green Pin® Thrust bearing swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

101

9

Hooks

P-6714C

Green Pin® large eye hooks, Grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

103

P-6714A

Green Pin® large eye hooks, Grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

103

P-6703A

Green Pin® swivel hooks, Grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

104

P-6731

Green Pin® pipe line hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

105

P-6706A

Green Pin® sliding choker hooks - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

105

10

Eye Bolts/Eye Nuts

S-8140

Green Pin® eye bolts - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

107

E-8140

Green Pin® eye bolts - generally to DIN 580 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

107

S-8142

Green Pin® eye nuts - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

108

E-8142

Green Pin eye nuts - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

108

11

Loadbinders

P-7170

Green Pin® ratchet type loadbinders - with hooks - according to EN-12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

111

P-7190

Green Pin® ratchet type loadbinders - without hooks - according to EN-12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . .

111

®

P-7130R

Green Pin ratchet type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7130G

Green Pin® ratchet type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7150R

Green Pin® ratchet type loadbinders - without hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7150G

Green Pin® ratchet type loadbinders - without hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7110R

Green Pin® lever type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

P-7110G

Green Pin lever type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

P-7120

Green Pin® spring type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

12

Chain

®

®

S-7660

Short link chain - generally to DIN 766, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

E-7661

Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

G-7662

Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . .

115

S-7630

Long link chain - generally to DIN 763, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

E-7631

Long link chain - generally to DIN 763, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

G-7632

Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . .

115

13

Plate Lifting Clamps

P-6615

Green Pin® plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

118

P-6616

Green Pin® plate lifting clamp, type ES, with enlarged opening - for lifting and vertical transportation . . . . . . . . . .

118

P-6625

Green Pin® plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . .

119

P-6626

Green Pin® plate lifting clamp, type EUS, with enlarged opening - for lifting and transportation in all directions . .

119

P-6635

Green Pin plate lifting clamp, type EH - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . .

120

P-6636

Green Pin® plate lifting clamp, type EHS, with enlarged opening - for lifting and horizontal transportation . . . . . .

120

P-6685

Green Pin® lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6651

Green Pin® plate lifting clamp spare part - lifting eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6652

Green Pin® plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-6653

Green Pin® plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6654

Green Pin plate lifting clamp spare part - cam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-6655

Green Pin® plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-6656

Green Pin® plate lifting clamp spare part - pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-6657

Green Pin® plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6658

Green Pin® plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

®

®

Blocks

P-6951

Green Pin® Snatch blocks - type 601S, with Green Pin® Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

125

P-6952

Snatch blocks - type 601H, with hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

126

P-6953

Snatch blocks - type 601T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

126

G-6917

Galvanized malleable iron blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

127

G-6918

Galvanized malleable iron blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

127

G-6922

Galvanized malleable iron blocks - with eye, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

128

G-6923

Galvanized malleable iron blocks - with hook, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

128

G-6927

Galvanized malleable iron blocks - with eye, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129

G-6928

Galvanized malleable iron blocks - with hook, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129

P-6916

American pattern cargo blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

130

15

General Hardware

E-7300

Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

133

E-7310

Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

133

E-7200

Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

134

E-7210

Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

134

E-7220

Carabine hooks - with screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

135

E-7230

Carabine hooks - with pressed thimble and screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

135

E-7950

Split pins - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

136

E-7930

Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

138

E-7931

Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

139

E-7940

Linch pins - with round spring ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

140

TAGRFID

Green Pin® RFID Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

141

E-7910

Chain repair links - commercial quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

142

E-7920

S-hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

143

16

Stainless Steel Products

R-7825

Shackles - bow shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

145

R-7827

Shackles - bow shackle with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

145

R-7821

Shackles - dee shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

146

R-7823

Shackles - dee shackle with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

146

R-7829

Shackles - long dee type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

147

R-7822

Shackles - short twisted type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

147

R-7860

Thimbles - heavy type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

148

R-7863

Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

148

R-7837

Open body rigging screws Hook - Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

149

R-7838

Open body rigging screws Hook - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

149

R-7839

Open body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

150

R-7830

Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

150

R-7834

Fork terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

151

R-7835

Eye terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

151

R-7836

Threaded terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

152

R-7877

Swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

152

R-7840

Eye bolts - generally to DIN 580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

153

R-7842

Eye nuts - generally to DIN 582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

153

R-7873

Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

154

R-7874

Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

154

R-7872

Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

155

R-7875

Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

155

R-7876

Carabine hooks - with screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

156

R-7856

Split pins - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

157

R-7850

Safety pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

158

R-7852

Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

159

R-7854

Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

160

R-7880

Short link chain - generally to DIN 766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

161

R-7890

Long link chain - generally to DIN 763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

161

165

Index by Chapter

14

Index by Productname

A Aluminium sleeves - for wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-6550

68

American pattern cargo blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6916

130

C Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7200

134

Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7872

155

Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7210

134

Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7875

155

Carabine hooks - with pressed thimble and screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7230

135

Carabine hooks - with screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7220

135

Carabine hooks - with screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7876

156

Chain repair links - commercial quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7910

142

Closed body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6340

92

Closed body rigging screws Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6345

93

Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6343

92

Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7830

150

Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . .

E-1162

47

Commercial Shackles - bow shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . .

S-1162

47

Commercial Shackles - bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-1161

46

Commercial Shackles - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-1161

46

Commercial Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-1164

46

Commercial Shackles - danlino V shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-1170

51

Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . .

E-1152

51

Commercial Shackles - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . .

S-1152

49

Commercial Shackles - dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-1151

48

Commercial Shackles - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-1151

48

Commercial Shackles - dee shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-1154

48

E Eye bolts - generally to DIN 580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7840

153

Eye nuts - generally to DIN 582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7842

153

Eye terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7835

151

R-7834

151

Galvanized malleable iron blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6917

127

Galvanized malleable iron blocks - with eye, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6927

129

Galvanized malleable iron blocks - with eye, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6922

129

Galvanized malleable iron blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6918

127

Galvanized malleable iron blocks - with hook, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6928

129

Galvanized malleable iron blocks - with hook, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6923

128

Green Pin® connecting links - for connecting Grade 8 chain-slings - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6860R

95

Green Pin® connecting links - for connecting Grade 8 chain-slings - yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6860Y

95

Green Pin® eye bolts - generally to DIN 580 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-8140

107

Green Pin® eye bolts - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-8140

107

Green Pin eye nuts - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-8142

108

Green Pin® eye nuts - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-8142

108

Green Pin® Heavy Duty Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6031

25

Green Pin® Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6036

20

Green Pin® Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6038

21

F Fork terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G

®

Green Pin large eye hooks, Grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6714C

103

Green Pin® large eye hooks, Grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6714A

103

Green Pin® lever type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7110G

113

Green Pin® lever type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7110R

113

Green Pin® lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6685

121

Green Pin pipe line hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6731

105

®

®

166

P-6654

121

Green Pin® plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6655

121

Green Pin® plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6657

121

Green Pin® plate lifting clamp spare part - lifting eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-3351

121

Green Pin® plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6652

121

Green Pin plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6653

121

Green Pin® plate lifting clamp spare part - pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6656

121

Green Pin® plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6658

121

Green Pin® plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6615

118

Green Pin® plate lifting clamp, type EH - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6635

120

Green Pin® plate lifting clamp, type EHS, with enlarged opening - for lifting and horizontal transportation . . . . . .

P-6636

120

Green Pin plate lifting clamp, type ES, with enlarged opening - for lifting and vertical transportation . . . . . . . . . .

P-6616

118

Green Pin® plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . .

P-6625

119

Green Pin® plate lifting clamp, type EUS, with enlarged opening - for lifting and transportation in all directions . .

P-6626

119

Green Pin® Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-5163

24

Green Pin® Polar turnbuckles Jaw - Jaw with safety bolt - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . .

G-6333

84

®

®

Green Pin ratchet type loadbinders - with hooks - according to EN-12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7170

111

Green Pin® ratchet type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7130G

112

Green Pin® ratchet type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7130R

112

Green Pin® ratchet type loadbinders - without hooks - according to EN-12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7190

111

Green Pin® ratchet type loadbinders - without hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7150G

112

Green Pin ratchet type loadbinders - without hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7150R

112

Green Pin® RFID Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TAGRFID

141

Green Pin® ROV Release Polar Shackles - with spring pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-5363

28

Green Pin® ROV Release Polar Shackles - with locking clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-5365

29

Green Pin® ROV Spring Release Polar Shackles - spring loaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-5367

30

®

®

Green Pin sliding choker hooks - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6706A

Green Pin® Sling Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6033

22

Green Pin® Snatch blocks - type 601S, with Green Pin® Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6951

125

Green Pin® sockets - closed spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6411

73

Green Pin® sockets - open spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6412

74

Green Pin® sockets - open spelter socket with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . .

G-6422

75

Green Pin sockets - open wedge socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6413

76

Green Pin® sockets - open wedge socket with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . .

G-6423

77

Green Pin® spring type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7120

113

Green Pin® Standard Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-4163

17

Green Pin® Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-4161

16

Green Pin Standard Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-4153

19

Green Pin® Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-4151

18

Green Pin® Sunken Hole Shackles - bow shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . .

G-4169

34

Green Pin® Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . .

G-4159

35

Green Pin® Super Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-5263

23 104

®

®

®

105

Green Pin swivel hooks, Grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6703A

Green Pin® swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-7713

99

Green Pin® swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-7723

100

Green Pin® Trawling Shackles - bow shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-4164

32

Green Pin® Trawling Shackles - dee shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-4154

33

Green Pin® turnbuckles Eye - Eye - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6311

85

Green Pin turnbuckles Eye - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6314

88

Green Pin® turnbuckles Eye - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6315

87

Green Pin® turnbuckles Hook - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6312

86

Green Pin® turnbuckles Jaw - Jaw with cotter pin - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6313

82

Green Pin® turnbuckles Jaw - Jaw with safety bolt - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . .

G-6323

83

Green Pin Wide Mouth Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-4263

26

Green Pin® wire rope clips - generally to EN 13411-5 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6240

63

P-4170

34

®

®

®

K Key for Green Pin® Sunken Hole Shackles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

167

Index by Productname

Green Pin® plate lifting clamp spare part - cam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index by Productname

L Linch pins - with round spring ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7940

140

Long link chain - generally to DIN 763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7890

161

Long link chain - generally to DIN 763, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7631

115

Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . .

G-7632

115

Long link chain - generally to DIN 763, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-7630

115

M Master link assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MTS

97

Master links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MS

96

Mooring Shackles - bow shackles with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-1165

36

O Open body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7839

150

Open body rigging screws Hook - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7838

149

Open body rigging screws Hook - Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7837

149

S-6500

67

P Prescon sleeves - with colour code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7300

133

Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7873

154

Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7310

133

Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7874

154

Rigging screws Eye - Eye - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6351

89

Rigging screws Eye - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6354

90

Rigging screws Hook - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6352

89

Rigging screws Jaw - Jaw - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6353

90

Rigging screws with Welding Ends - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6355

91

Safety pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7850

158

Shackles - bow shackle with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7827

145

Shackles - bow shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7825

145

R

S

168

Shackles - dee shackle with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7823

146

Shackles - dee shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7821

146

Shackles - long dee type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7829

147

Shackles - short twisted type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7822

147

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . . .

E-2755

45

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . .

G-2755

45

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - self coloured . . . . . . . . . . . .

S-2755

45

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized . . . . . . . .

E-2751

44

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized . . . .

G-2751

44

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - self coloured . . . . . . . . . . . .

S-2751

44

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized . . . . . . .

E-2761

42

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . .

G-2761

42

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - self coloured . . . . . . . . . . .

S-2761

42

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . .

E-2765

43

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized . . . .

G-2765

43

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - self coloured . . . . . . . . . . .

S-2765

43

Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . .

G-3466

37

Shackles generally to DIN 82016 type B - bow shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . .

S-3466

37

Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . .

G-3351

38

Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . .

S-3351

38

Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized . .

G-3352

38

Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . .

S-3352

34

G-3356

Shackles generally to DIN 82101 type C - dee shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . .

S-3356

39 39

S-hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7920

143

Short link chain - generally to DIN 766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7880

161

Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7661

115

Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . .

G-7662

115

Short link chain - generally to DIN 766, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-7660

115

Shortbow sockets - closed spelter socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6416

77

Snatch blocks - type 601H, with hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6952

126

Snatch blocks - type 601T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6953

126

Split pins - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7950

136

Split pins - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7856

157

Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7931

139

Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7854

160

Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-7930

138

Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7852

159

Swage sockets - closed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6415

79

Swage sockets - open type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6414

78

Swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7877

152

Thimbles - for rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6180

58

Thimbles - generally to DIN 3090 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6135

55

Thimbles - generally to DIN 3090 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6135

55

Thimbles - generally to DIN 3091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6134

54

Thimbles - generally to DIN 6899 (B) - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6131

53

Thimbles - generally to DIN 6899 (B) - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6131

53

Thimbles - generally to DIN 83311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6133

54

Thimbles - generally to EN 13411-1 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6170

56

Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . .

G-6142

57

Thimbles - heavy duty stub-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6120

51

Thimbles - heavy duty stub-end, reinforced with welded plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6128

52

T

Thimbles - heavy type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7860

148

Thimbles - pennant line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-6151

58

Thimbles - standard commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6110

51

Thimbles - tubular type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6190

59

Thimbles - tubular type, with welded plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6195

59

Threaded terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7836

152

Green Pin® Thrust bearing swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-7740

101

Turnbuckles (hamburgers) - for deck lashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S-6330

91

W Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6220

65

Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R-7863

148

Wire rope clips - generally to EN 13411-5 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-6260

64

Yellow Pin Shackles - bow shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-3163

40

Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-3161

40

Yellow Pin Shackles - dee shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-3153

41

Yellow Pin Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-3151

41

Y

169

Index by Productname

Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . .

Index by Productnumber

A A-6550

Aluminium sleeves - for wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

E-1151

Commercial Shackles - dee shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

E-1152

Commercial Shackles - dee shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . .

49

E-1161

Commercial Shackles - bow shackles with screw collar pin - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

E-1162

Commercial Shackles - bow shackles with counter sunk screw pin - electro-galvanized . . . . . . . . . . . . . . . . . . . .

47

E-2751

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - electro-galvanized . . . . . . . .

44

E-2755

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - electro-galvanized . . . . . . .

45

E-2761

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - electro-galvanized . . . . . . .

42

E-2765

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - electro-galvanized . . . . . . .

43

E-6110

Thimbles - standard commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51

E-6131

Thimbles - generally to DIN 6899 (B) - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

E-6135

Thimbles - generally to DIN 3090 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

E-6180

Thimbles - for rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58

E-6220

Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

65

E-6260

Wire rope clips - generally to EN 13411-5 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64

E-6351

Rigging screws Eye - Eye - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

89

E-6352

Rigging screws Hook - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

89

E-6353

Rigging screws Jaw - Jaw - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

90

E-6354

Rigging screws Eye - Hook - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

90

E-6355

Rigging screws with Welding Ends - according to DIN 1480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

E-7200

Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

134

E-7210

Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

134

E-7220

Carabine hooks - with screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

135

E-7230

Carabine hooks - with pressed thimble and screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

135

E-7300

Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

133

E-7310

Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

133

E

E-7631

Long link chain - generally to DIN 763, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

E-7661

Short link chain - generally to DIN 766, commercial quality - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

E-7910

Chain repair links - commercial quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

142

E-7920

S-hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

143

E-7930

Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

138

E-7931

Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

139

E-7940

Linch pins - with round spring ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

140

E-7950

Split pins - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

136

E-8140

Green Pin eye bolts - generally to DIN 580 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

107

E-8142

Green Pin® eye nuts - generally to DIN 582 - electro-galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

108

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - hot dipped galvanized . . . .

44

®

G G-2751

170

G-2755

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - hot dipped galvanized . . . .

45

G-2761

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - hot dipped galvanized . . . .

42

G-2765

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - hot dipped galvanized . . . .

43

G-3151

Yellow Pin Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

G-3153

Yellow Pin Shackles - dee shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

G-3161

Yellow Pin Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

G-3163

Yellow Pin Shackles - bow shackles with safety pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

G-3351

Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - hot dipped galvanized . . . . . . . . .

38

G-3352

Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - hot dipped galvanized . .

38

G-3356

Shackles generally to DIN 82101 type C - dee shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . . .

39

G-3466

Shackles generally to DIN 82016 type B - bow shackles with safety bolt - hot dipped galvanized . . . . . . . . . . . .

37

G-4151

Green Pin Standard Shackles - dee shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

G-4153

Green Pin® Standard Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

G-4154

Green Pin® Trawling Shackles - dee shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

G-4159

Green Pin® Sunken Hole Shackles - dee shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . .

35

G-4161

Green Pin® Standard Shackles - bow shackles with screw collar pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

G-4163

Green Pin Standard Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

®

®

Green Pin® Trawling Shackles - bow shackles with square headed screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

G-4169

Green Pin® Sunken Hole Shackles - bow shackles with square sunken hole screw pin . . . . . . . . . . . . . . . . . . . . .

34

G-4263

Green Pin® Wide Mouth Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

G-5163

Green Pin® Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

G-5263

Green Pin® Super Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

G-6038

Green Pin® Heavy Duty Shackles - dee shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

G-6120

Thimbles - heavy duty stub-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51

G-6128

Thimbles - heavy duty stub-end, reinforced with welded plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

52

G-6131

Thimbles - generally to DIN 6899 (B) - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

G-6133

Thimbles - generally to DIN 83311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

G-6135

Thimbles - generally to DIN 3090 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

G-6142

Thimbles - generally to US Federal Specification FF-T-276b type III - hot dipped galvanized . . . . . . . . . . . . . . . . .

57

G-6151

Thimbles - pennant line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58

G-6170

Thimbles - generally to EN 13411-1 - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

56

G-6240

Green Pin® wire rope clips - generally to EN 13411-5 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63

G-6311

Green Pin® turnbuckles Eye - Eye - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

85

G-6312

Green Pin turnbuckles Hook - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

G-6313

Green Pin® turnbuckles Jaw - Jaw with cotter pin - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . .

82

G-6314

Green Pin® turnbuckles Eye - Hook - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

88

G-6315

Green Pin® turnbuckles Eye - Jaw - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

87

G-6323

Green Pin® turnbuckles Jaw - Jaw with safety bolt - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . . . . . . .

83

G-6333

Green Pin® Polar turnbuckles Jaw - Jaw with safety bolt - generally to ASTM F1145-92 . . . . . . . . . . . . . . . . . . . .

84

G-6340

Closed body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

92

G-6343

Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

92

G-6345

Closed body rigging screws Eye - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

93

G-6411

Green Pin® sockets - closed spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

69

G-6412

Green Pin® sockets - open spelter socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

G-6413

Green Pin® sockets - open wedge socket - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

76

G-6416

Shortbow sockets - closed spelter socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

77

G-6422

Green Pin® sockets - open spelter socket with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . .

74

G-6423

Green Pin® sockets - open wedge socket with safety bolt - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . . .

77

G-6917

Galvanized malleable iron blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

127

G-6918

Galvanized malleable iron blocks - with hook, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

127

G-6922

Galvanized malleable iron blocks - with eye, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

128

G-6923

Galvanized malleable iron blocks - with hook, two sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

124

G-6927

Galvanized malleable iron blocks - with eye, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129

G-6928

Galvanized malleable iron blocks - with hook, three sheaves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

129

G-7662

Short link chain - generally to DIN 766, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . .

114

G-7632

Long link chain - generally to DIN 763, commercial quality - hot dipped galvanized . . . . . . . . . . . . . . . . . . . . . . . .

114

G-7713

Green Pin® swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

99

G-7723

Green Pin® swivels Jaw - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

100

MS

Master links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

96

MTS

Master link assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

97

P-4170

Key for Green Pin® Sunken Hole Shackles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34 28

®

M

P P-5363

Green Pin ROV Release Polar Shackles - with spring pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-5365

Green Pin® ROV Release Polar Shackles - with locking clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29

P-5367

Green Pin® ROV Spring Release Polar Shackles - spring loaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

P-6031

Green Pin® Heavy Duty Polar Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

P-6033

Green Pin® Sling Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

P-6036

Green Pin Heavy Duty Shackles - bow shackles with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

P-6190

Thimbles - tubular type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

P-6195

Thimbles - tubular type, with welded plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

®

®

171

Index by Productnumber

G-4164

Index by Productnumber

P-6615

Green Pin® plate lifting clamp, type E - for lifting and vertical transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

118

P-6616

Green Pin® plate lifting clamp, type ES, with enlarged opening - for lifting and vertical transportation . . . . . . . . . .

118

P-6625

Green Pin® plate lifting clamp, type EU - for lifting and transportation in all directions . . . . . . . . . . . . . . . . . . . . . .

119

P-6626

Green Pin® plate lifting clamp, type EUS, with enlarged opening - for lifting and transportation in all directions . .

119

P-6635

Green Pin® plate lifting clamp, type EH - for lifting and horizontal transportation . . . . . . . . . . . . . . . . . . . . . . . . . .

120 120

P-6636

Green Pin plate lifting clamp, type EHS, with enlarged opening - for lifting and horizontal transportation . . . . . .

P-6651

Green Pin® plate lifting clamp spare part - lifting eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6652

Green Pin® plate lifting clamp spare part - lock lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6654

Green Pin® plate lifting clamp spare part - cam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6658

Green Pin® plate lifting clamp spare part - universal eye component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

P-6685

Green Pin® lifting clamp, type ESV - for lifting and transportation of steel beams . . . . . . . . . . . . . . . . . . . . . . . . . .

121

®

P-6703A

Green Pin swivel hooks, Grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

104

P-6706A

Green Pin® sliding choker hooks - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

105

P-6714A

Green Pin® large eye hooks, Grade 8 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

103

P-6714C

Green Pin® large eye hooks, Grade 4 - with safety latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

103

P-6731

Green Pin® pipe line hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

105 95

®

P-6860R

Green Pin connecting links - for connecting Grade 8 chain-slings - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P-6860Y

Green Pin® connecting links - for connecting Grade 8 chain-slings - yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

95

P-6916

American pattern cargo blocks - with eye, one sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

130

P-6951

Green Pin® Snatch blocks - type 601S, with Green Pin® Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

125

P-6952

Snatch blocks - type 601H, with hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

126

®

P-6953

Snatch blocks - type 601T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

126

P-7110G

Green Pin® lever type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

P-7110R

Green Pin® lever type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

P-7120

Green Pin® spring type loadbinders - with hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

P-7130G

Green Pin® ratchet type loadbinders - with hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7130R

Green Pin ratchet type loadbinders - with hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7150G

Green Pin® ratchet type loadbinders - without hooks - green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7150R

Green Pin® ratchet type loadbinders - without hooks - red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

P-7170

Green Pin® ratchet type loadbinders - with hooks - according to EN-12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

111

P-7190

Green Pin® ratchet type loadbinders - without hooks - according to EN-12195-3 . . . . . . . . . . . . . . . . . . . . . . . . . .

111

P-7740

Green Pin® Thrust bearing swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

101

R-7821

Shackles - dee shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

146

R-7822

Shackles - short twisted type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

147

R-7823

Shackles - dee shackle with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

146

R-7825

Shackles - bow shackle with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

145

R-7827

Shackles - bow shackle with safety bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

145

R-7829

Shackles - long dee type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

147

R-7830

Closed body rigging screws Jaw - Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

150

R-7834

Fork terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

151

®

R

172

R-7835

Eye terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

151

R-7836

Threaded terminals - swage type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

152

R-7837

Open body rigging screws Hook - Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

149

R-7838

Open body rigging screws Hook - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

149

R-7839

Open body rigging screws Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

150

R-7840

Eye bolts - generally to DIN 580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

153

R-7842

Eye nuts - generally to DIN 582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

153

R-7850

Safety pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

158

R-7852

Spring pins - single type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

159

R-7854

Spring pins - double type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

160

R-7856

Split pins - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

157

R-7860

Thimbles - heavy type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

148

R-7863

Wire rope clips - generally to DIN 741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

148

R-7872

Carabine hooks - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

155

R-7873

Quick links - standard type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

154

R-7874

Quick links - with enlarged opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

154

R-7875

Carabine hooks - with pressed thimble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

155

R-7876

Carabine hooks - with screw nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

156

Swivels Eye - Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

152

R-7880

Short link chain - generally to DIN 766 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

161

R-7890

Long link chain - generally to DIN 763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

161

S S-1151

Commercial Shackles - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

S-1152

Commercial Shackles - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . .

49

S-1154

Commercial Shackles - dee shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

S-1161

Commercial Shackles - bow shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

S-1162

Commercial Shackles - bow shackles with counter sunk screw pin - self coloured . . . . . . . . . . . . . . . . . . . . . . . .

47

S-1164

Commercial Shackles - bow shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

S-1165

Mooring Shackles - bow shackles with screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

S-1170

Commercial Shackles - danlino V shackles with square head screw pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

S-2751

Shackles generally to B.S. 3032 table 2 - large dee shackles with screw collar pin - self coloured . . . . . . . . . . . .

44

S-2755

Shackles generally to B.S. 3032 table 1 - small dee shackles with screw collar pin - self coloured . . . . . . . . . . . .

45

S-2761

Shackles generally to B.S. 3032 table 3 - large bow shackles with screw collar pin - self coloured . . . . . . . . . . .

42

S-2765

Shackles generally to B.S. 3032 table 4 - small bow shackles with screw collar pin - self coloured . . . . . . . . . . .

43

S-3351

Shackles generally to DIN 82101 type A - dee shackles with screw collar pin - self coloured . . . . . . . . . . . . . . . .

38

S-3352

Shackles generally to DIN 82101 type B - dee shackles with counter sunk screw pin - self coloured . . . . . . . . . .

38

S-3356

Shackles generally to DIN 82101 type C - dee shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . .

39

S-3466

Shackles generally to DIN 82016 type B - bow shackles with safety bolt - self coloured . . . . . . . . . . . . . . . . . . . . .

37

S-6134

Thimbles - generally to DIN 3091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

S-6330

Turnbuckles (hamburgers) - for deck lashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

S-6414

Swage sockets - open type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

S-6415

Swage sockets - closed type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

79

S-6500

Prescon sleeves - with colour code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

67

S-6653

Green Pin plate lifting clamp spare part - lock spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-6655

Green Pin® plate lifting clamp spare part - cam pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-6656

Green Pin® plate lifting clamp spare part - pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-6657

Green Pin® plate lifting clamp spare part - eye pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

S-7630

Long link chain - generally to DIN 763, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

S-7660

Short link chain - generally to DIN 766, commercial quality - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

S-8140

Green Pin eye bolts - generally to DIN 580 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

107

S-8142

Green Pin® eye nuts - generally to DIN 582 - self coloured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

108

Green Pin® RFID Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

141

®

®

T TAGRFID

173

Index by Productnumber

R-7877

General conditions

Version: AL 5/2012

General conditions of Sale of the private company with limited liability Van Beest BV, established in Sliedrecht Article 1 General

These General Conditions are applicable to all agreements concluded by Van Beest B.V. (hereinafter referred to as: “Van Beest”) with third parties (hereinafter referred to as: the “client”). The trading conditions of the client are not accepted by Van Beest.

Article 2 Offers 2.1

Quotations made by or on behalf of Van Beest are without obligation and are based on data, drawings et cetera provided by the client, if any.

2.2

The prices stated by Van Beest are based on the price determining factors valid at the time of the quotation , including government levies and wages, calculated according to the usual working times adhered to by Van Beest. If one or more of these cost price factor changes before the offer is accepted, - including changes due to fluctuations in the exchange rate of foreign currency - even if this is a result of foreseeable circumstances, Van Beest is entitled to modify the price quoted accordingly. Van Beest will inform the client accordingly in that case.

Article 3 Agreements 3.1

Orders accepted by agents, representatives, commercial travellers and intermediaries will only become valid after they have been confirmed in writing by Van Beest, i.e. by a document signed by both parties, or by letter, fax, e-mail, or any other instrument as agreed by both parties.

3.2

All drawings, calculations, plans, systems, stamps and moulds, methods and other data will remain the property of Van Beest and may not be disclosed to third parties by the client without the prior written permission of Van Beest.

3.3



Price increases caused by production activities being delayed and/or made more difficult through no fault of Van Beest or as a result of an increase in one or more cost price factors, even if such increase has occurred due to foreseeable circumstances, or as a result of government regulations coming into force, will be for the account of the client. The client will be entitled to make modifications to the goods to be delivered after the conclusion of the agreement as well, but these will only be implemented if Van Beest judges that the production process so allows and provided that the client has stated in writing that he will pay all extra costs associated therewith.

Article 4 Prices and Payment 4.1

The prices quoted by Van Beest in catalogues, price lists, et cetera are without obligation and may be modified without prior notification. Prices do not include turnover tax and are based on “ex works” Incoterms current on the date of the quotation.

4.2

All amounts due are payable within 30 days of the date of the invoice, unless agreed otherwise. Claims for a reduction or settlement will not be accepted. Any costs in connection with effecting payments via banks, conversion of currency, credit costs, etc. are at all times for the account of the client.

4.3



In the event of late payment the client owes interest, as from the due date of the invoice, equal to 3 points above the percentage of the current statutory interest in the Netherlands as referred to in Sections 6:119a and 6:120 Paragraph 2 of the Dutch Civil Code, while Van Beest will be entitled to suspend the fulfilment of its obligations by the amount of time by which the payment has been delayed. Once Van Beest has passed on its claim for collection by third parties, the client will owe extra judicial costs of 15% over and above the amount due, including interest, without prejudice to the costs which the client is required to pay by law.

Article 5 Delivery 5.1 5.2

5.3

The delivery time commences as from the latest of the following dates: a. the day of signing of Van Beest’s written order confirmation; b. the date of receipt of the instalment due under the order; c. the date of receipt of the technical data, documents and/or securities to be provided to Van Beest by the client. Exceeding the delivery date does not entitle the client to compensation nor give it the right to demand cancellation of the agreement or to suspend fulfilment of its own obligations. In the case of mass production by Van Beest or its suppliers of products which deviate from the standard products in the production range, Van Beest will be entitled to maintain a margin in respect of the delivered products of 5% above or below the number of products ordered.

Article 6 Risk and Retention of Title 6.1

6.2

The risk with regard to damage, theft, loss, etc. of the products passes to the client at the moment when the products are delivered at the client. The ownership of the products manufactured by Van Beest and delivered to the client will be transferred to the client once he has paid all that Van Beest is owed in respect of deliveries or services, including the interest and costs, or once he has provided satisfactory security for the fulfilment of his obligations. For as long as this is not the case Van Beest will remain entitled to repossess the products it has delivered. All costs connected therewith will be for the account of the client. The client is not entitled to deliver products to third parties that have not been paid for, except in the normal course of business.

Article 7 Security 7.1

174

Notwithstanding the agreed conditions of payment, Van Beest will be entitled at all times to demand security from the client for the fulfilment of his obligations before commencing delivery or before continuing a delivery that has already commenced.

8.1

Van Beest guarantees that the products it sells and delivers meet the specifications applicable to these products, as stated in the Van Beest catalogue. Only specifications expressly agreed in writing apply to products not included in the Van Beest catalogue. The guarantee will in no event be valid for more than three months as from the date of delivery to the client.

8.2

Defects caused by normal wear and tear, inappropriate and/or improper use, or insufficient maintenance, will in no event be covered by the guarantee.

8.3

Van Beest will supply the following test certificates at additional costs: - dock regulations certificate certificates of classification societies ABS, DNV, Bureau Veritas, R.I.N.A., Germanischer Lloyd, A.I.B.-Vinςotte, and Lloyd’s Register of Shipping.

8.4

The client is obliged to inspect the goods delivered - or have them inspected - immediately upon arrival. Complaints regarding the quality or quantity, or other deviations and/or damage must be submitted by the client in detail to Van Beest within 14 days of receipt of the goods, in writing, by post, telex, fax or e-mail. Complaints will no longer be accepted once the client has processed the delivered products or has them delivered to third parties.

8.5

Should Van Beest consider a complaint to be well-founded, it is only obliged to replace the defective product free of charge; Van Beest will in no event be obliged to compensate any consequential loss or damage suffered by the client, howsoever named.

Article 9 Non-attributable Failure 9.1

Where the non-fulfilment of an agreement by Van Beest is caused by circumstances beyond the control of Van Beest - even though such circumstances could have been foreseen at the time when the agreement was concluded - such as war or kindred risks, terrorism, mobilisation, revolt, strike, sit-ins or blockades, boycotts, disruptions in public utilities, government measures, and shortcoming by suppliers, the consequences will not be attributed to Van Beest. In such cases the parties will consult in order to agree a possible adjustment or suspension of the agreement. If no consensus is reached and it is no longer possible to perform the agreement , the agreement may be cancelled by either party.

Article 10 Liability for Damage 10.1

Van Beest will compensate any damage suffered by the Client, provided the client is able to prove that the damage is caused by a defect in a product supplied by Van Beest. Financial loss, such as loss of profit, lost earnings, costs in connection with delays in or interruption of the production or any other consequential loss will in no event be eligible for compensation save in the event of deliberate intent or recklessness on the part of Van Beest.

10.2

Damage to goods belonging to the client and personal injury will be compensated to a maximum of the amount for which Van Beest receives compensation from its insurer.

10.3

The client will indemnify Van Beest against all third-party claims in connection with products supplied to the client by Van Beest, save where such loss is for the account of Van Beest by agreement.

10.4

Van Beest accepts no liability whatsoever for any advice it provides without express agreement, save in the event of deliberate intent or recklessness on the part of Van Beest.

10.5

All claims for compensation will lapse after 5 years, as from the date when the client has become aware of the loss.

Article 11 Cancellation 11.1

Should the client wish to cancel an agreement, giving reasons , he will be obliged to purchase all goods ordered and/or already wholly or partially processed by Van Beest, at the agreed price and to pay Van Beest a compensation equal to 15% of the amount of the order, plus exchange loss, if any, on the part of Van Beest.

Article 12 Taxes 12.1

All taxes and duties imposed on Van Beest in the case of export, including import duties, are for the account of the client.

Article 13 Intellectual Property Rights 13.1

The client will indemnify Van Beest against all third-party claims arising from the alleged violation of any intellectual property rights these third parties are entitled to.

13.2

The client is not allowed to use the trade name and the brand or designation “Green Pin®” for its own business activities or to associate these with other than “Green Pin®” products, without the written permission of Van Beest. Furthermore the client undertakes to inform Van Beest immediately of any infringement by third parties of this trade name or brand.

Article 14 Termination 14.1

In the event that the client is declared bankrupt, his goods are attached, the client applies for a moratorium or fails to fulfil any obligation towards Van Beest, Van Beest will be entitled to terminate any agreement concluded with the client that has not yet been performed or not fully, by a statement in writing.

Article 15 Applicable Law; Disputes 15.1

All agreements with Van Beest are governed exclusively by Dutch Law. The provisions of the Vienna Sales Convention (CISG) are expressly excluded.

15.2

Disputes arising from any agreement concluded with Van Beest will be submitted to the judgement of the District Court of Dordrecht, with the exception of the right of Van Beest to summon the client before the court that has jurisdiction according to Dutch law and subject to the competence of the subdistrict court in accordance with the rules of the Dutch law of civil procedure.

175

General conditions

Article 8 Guarantee and Complaints

Notes