High Strain Dynamic Pile Testing - Dynamic pile testing : Pile load [PDF]

Conforms to international standards and ASTM D4945. Recognition. Dynamic testing is officially recognized by: American S
6 downloads 4 Views 177KB Size
Report
Download PDF
PNG Network

Recommend Stories

Pile Capacity Predictions Using Static and Dynamic Load Testing [PDF]
Jun 14, 2016 - FINAL REPORT. PILE CAPACITY PREDICTIONS USING. STATIC AND DYNAMIC LOAD TESTING. To: H. L. Michael, Director. Joint Highway Research Project. From: C. W. Lovell, Research Engineer. Joint Highway Research Project. February 3 ,. 1 987. Pr
NDT Pile Testing Methods
Your task is not to seek for love, but merely to seek and find all the barriers within yourself that
Pile Integrity Testing (PIT) [PDF]
Standard Test Method for Integrity Testing of Concrete. Deep Foundations by Ultrasonic Crosshole Testing (ASTM. D 6760-08). Standard Test Method for Low-Strain Impact Integrity. Testing of Deep Foundations (ASTM D 5882-07), and. Standard Test Method
Estimation of Pile Capacity by Optimizing Dynamic Pile Driving Formulae
Raise your words, not voice. It is rain that grows flowers, not thunder. Rumi
The Economics of Pile Testing
The beauty of a living thing is not the atoms that go into it, but the way those atoms are put together.
Axial Non-linear Dynamic Soil-Pile Interaction
You have to expect things of yourself before you can do them. Michael Jordan
Pile poil
At the end of your life, you will never regret not having passed one more test, not winning one more
Pile foundations
Don’t grieve. Anything you lose comes round in another form. Rumi
Pile Seals
Don't fear change. The surprise is the only way to new discoveries. Be playful! Gordana Biernat
Pile Load Test by Impact Driving
Almost everything will work again if you unplug it for a few minutes, including you. Anne Lamott

Idea Transcript

EMPANELLED CONSULTANTS IN M

High Strain Dynamic Pile Testing

Low Strain Integrity Testing

Services

Benefits at a Glance :

Evaluates the bearing

Dynamic Load Testing is conducted independent of

capacity of driven piles,

pile installation process. The test has primary goal of

drilled shafts and auger

assesment of bearing capacity . It is applicable to

cast(CFA) piles



Tests deep foundation

drilled shafts, continious flight auger, Cast-in-situ and driven piles

integrity quickly and economically Checks pile stresses and hammer performance



Used worldwide for more

Dynamic Pile Monitoring is conducted during the impact

than 30 Years

driving of steel, concrete or timber piles to contribute to safe

Proven reliable on

and economical pile installation. Most important results of

thousands of construction

this test are soil resistance to driving, hammer performance,

sites

dynamic pile stresses during driving and pile integrity.



Specified by Engineers, Contractors, Government agencies Conforms to international standards and ASTM





Soft ware used is CAse Pile Wave Analysis Program (CAPWAP) - Determines

D4945.

Static soil resistance

Recognition

Simulates a static load test

Dynamic testing is officially recognized by:

Static shaft resistance

American Society for

Magnitude and distribution

Testing Materials (ASTM) Deep Foundations

Static end bearing

Institute(DFI)

Stresses at any point along the shaft

Pile Driving Contractors

Energy transferred from the ram to the

Association (PDCA)

foundation.

American Society of Civil Engineers (ASCE) Federal Highway Administration (FHWA) American Association of State Highway Transportaion Officials (AASHTO) Many U.S. State Highway departments U.S.Army Corps of Engineers International Building Code (IBC 2000) Numerous International Organizations Copyright © All rights reserved to Struct Geotech Research Laboratories Private Limited

Helpful Links

Smile Life

When life gives you a hundred reasons to cry, show life that you have a thousand reasons to smile

Get in touch

© Copyright 2015 - 2024 PDFFOX.COM - All rights reserved.