More Next Blog»
Create Blog Sign In
Engineering Projects For more information on projects log on to www.efxkits.com
Friday, 25 May 2012
INDUSTRIAL BATTERY CHARGER WITH HIGH POWER DC BY THYRISTOR FIRING ANGLE CONTROL
Model no.10: The outline of the project is DC battery power control by microcontroller. The zero crossing point is detected by zero crossing detector and fed to the microcontroller. The microcontroller fires the thyristor by using the opto isolator. The power is applied to the load through a thyristor to the bridge rectifier. The rectified and controlled output is given to the DC load. The output is measured using a multimeter. This project uses a microcontroller from 8051 family. The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier. The ripples are removed using a capacitive filter and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller and other components. For more details about this project, please visit http://www.efxkits.com/projectkit/electrical/1119.html
HARDWARE REQUIREMENTS: Microcontroller unit, Op-amp, Opto-isolator, Thyristor, Voltage Regulator, Transformer, Diodes, Crystal oscillator, LED, Push button, Resistors, Capacitor, Load. SOFTWARE REQUIREMENTS: Keil compiler, Language: Embedded C or Assembly
Like us on Facebook. Follow us on Twitter. Visit our Website.
Posted by Efxkits at 22:25 Labels: Edgefx Technologies Location: Hyderabad, Andhra Pradesh, India
2 comments: Praveen G 11 February 2014 at 23:25 industrial battery chargers in mumbai Liked the post. Looking forward for more like this. Reply
naveen chauhan 2 December 2016 at 00:46 Online ups system - Find here online ups system manufacturers, suppliers in delhi, India. We provide online ups system manufacturers in delhi, India. VIEW MORE :-Online UPS System in India Reply
Subscribe to: Post Comments (Atom)
Simple theme. Powered by Blogger.