instruction manual [PDF]

INSTRUCTION MANUAL. GUeSS WATCheS ... For style with 10 ATM, suitable for swimming, sailing, sail boarding, surfing &

0 downloads 5 Views 3MB Size

Recommend Stories


Download Instruction Manual PDF
Respond to every call that excites your spirit. Rumi

Instruction Manual (PDF)
Where there is ruin, there is hope for a treasure. Rumi

PDF - Instruction Manual W4327D
The butterfly counts not months but moments, and has time enough. Rabindranath Tagore

instruction manual instruction manual
Don't ruin a good today by thinking about a bad yesterday. Let it go. Anonymous

Thule KIT3042 PDF Instruction Manual
At the end of your life, you will never regret not having passed one more test, not winning one more

instruction manual instruction manual nstruction manual
The butterfly counts not months but moments, and has time enough. Rabindranath Tagore

Instruction Manual
I tried to make sense of the Four Books, until love arrived, and it all became a single syllable. Yunus

instruction manual
Be who you needed when you were younger. Anonymous

Instruction Manual
Stop acting so small. You are the universe in ecstatic motion. Rumi

instruction manual
Pretending to not be afraid is as good as actually not being afraid. David Letterman

Idea Transcript


INSTRUCTION MANUAL Guess Watches

WOMENS

CONGRATULATIONS ON OWNING YOUR NEW GUESS WATCH. DEVELOPED FROM ADVANCED ELECTRONICS TECHNOLOGY, THE MOVEMENT IS MANUFACTURED FROM THE BEST QUALITY COMPONENTS AND Congratulations on owning your new GUESS Watch. Developed from advanced electronics technology, the POWERED BY A LONG LIFE BATTERY.

movement is manufactured from the best quality components and powered by a long life battery.

HIGH PERFORMANCE FEATURES ▼ 30 METERS (3 ATM) TO 100 METERS (10 ATM) For style with 10 ATM, suitable for swimming, sailing, sail boarding, surfing & shallow diving. ▼ WATER RESISTANT GENUINE LEATHER BANDS Specially developed water resistant leathers and construction are used in all GUESS straps. ▼ HIGH QUALITY STAINLESS STEEL CASE & BRACELET

1

3

WOMENS

OPERATING INSTRUCTIONS SIMPLE TIME / MINI SWEEP / DUAL TIME A B

A B

To set the time: 1. PULL out crown to B position. 2. TURN crown either way to correct time. 3. Push in crown to A position.

CALENDAR / DATE To set the time: 1. PULL out Crown to C position. 2. TURN crown either way to correct time. 3. PUSH in crown to A position. To set the calendar / date: 1. PULL out crown to B position. 2. TURN crown counter clockwise or towards you to correct date. 3. PUSH in crown to A position. NOTE: The date changes automatically every 24 hours. 2

4

WOMENS

DAY / DATE / 24 HOUR DATE

DAY

A B C

DAY / DATE / 24 HOUR A B C DATE

A B C

A B C

DATE

A B C

A B C

DATE

crown

DATE

A B C A B C

crown position

DATE DAY

DAY 24-HOUR

24-HOUR

MONTH SETTING BUTTON

A B C

DAY

MONTH DAY

DAY

24-HOUR

A B C A B C crown position

A B C

DATE SECOND

crown position

DATE

A B C

SECOND

MONTH

1 2 3

24-HOUR 24-HOUR

24-HOUR

24-HOUR

DATE

24-HOUR

DAY

DATE

DAY

MONTH SETTING BUTTONDATE

A B C

crown position

DATE crown position

24-HOUR

A B C

1 2 3

DATE

DAY

24-HOUR

DATE

DAY

C A B position DAY

24-HOUR

DAY

DATE

DAY

DAY 24-HOUR

DATE

crown position

24-HOUR crown position

DATE

24-HOUR

DATE To set time: 1. PULL out crown to C position. To set time: 2. TURN crown either way to correct time. To set 1. PULL out crown to day: C position. To set day: 3. PUSH intocrown crown A position. 1. either PULLway out toto C position. 2. TURN crown correct time.

To set day: To set day: To set day: 1. PULL out crown to C position. 1. PULL out crown to C position. PULL the out day. crown to C position 2. Advance time 24 hours to1.change 2. Advance time 24 hours to2.change the day. 1.2. PULL out crown to C position. Advance time 24 hours to ch time 24 hours to change the day. 3. PUSH in crown to A position. 3. PUSH in crownAdvance to A position. 3. PUSH in crown to A position. 2.3. Advance time 24 hours to change the day. 3. PUSH in crown to Asetting positionth PUSH in crown to A position. NOTE: 24 hour indicator can change only when NOTE: 24 hour indicator can change only when setting 3. PUSH in crown to A position. To set date: NOTE: 24 hour indicator canth c NOTE: 24 hour indicator can change only when setting the time. To set date: NOTE: 24 hour indicator can change only when setting the time. NOTE the date changes automatically every 24 hours. To set month: NOTE the date changes automatically every 24 hours. To set month: 1. PULL out crown to B position. To set To set Push month setting button until themonth: small hand of month i 1. PULL out crown to month: B position. Push month setting button until the smallsetting hand button of month To set month: Push month untis 2. TURN crown clockwise to correct date. month. Push monthto setting month is set to the correct 2. TURN crown clockwise correctbutton date. until the small hand ofmonth. month. Push month until the small hand of month is set to the correct 3. PUSH insetting crownbutton to A position. month. 3. PUSH in crown to A position. month.

6,9,12 Three-eye Chronograph wit 3 wit 6,9,12 Three-ey 3 6,9,12 Three-eye Chronograph with6,9,12 Date Three-eye Chronograph 5 WOMENS 6,9,12 Three-eye Chronograph with Date

DAY / DATE / 24 HOUR PUSHER A

PUSHER B 24 HOUR

DAY DATE

To set time:

1. PULL out crown to “B” position. 2. TURN crown either way to correct time. 3. PUSH in crown to “A” position

To set date:

DO NOT reset Date between 9:00 p.m. & 4:00 a.m. This may result in damaging the inner workings of the watch. Note: the date changes automatically every 24 hours 1. Push Pusher “B” to correct date.

To set day:

1. Push Pusher “A” to correct day.

1 6

WOMENS

month.

6,9,12 Three-eye Chronograph with Date

Crown position “A” , “B” & “C”. Pushers “A” (top) & “B” (bottom). 12 o’clock eye “1/10 seconds elapsed”. 9 o’clock eye “minutes elapsed”. 6 o’clock eye “seconds elapsed”. This chronograph watch has 3 functions: 4 TIME, CALENDAR, STOPWATCH. TIME To set the time: 1. PULL crown to “C” position. 2. TURN crown either way to correct time. 3. PUSH crown into “A” position. CALENDAR To set the calendar: 1. PULL out crown to “B” position. 2. TURN crown clockwise to correct date. 3. PUSH in crown to “A” position.

7

WOMENS

3. PUSH crown into “A” position. CALENDAR To set the calendar: 1. PULL out crown to “B” position. 2. TURN crown clockwise to correct date. 3. PUSH in crown to “A” position. NOTE: The date changes automatically every 24 hours. STOPWATCH The stopwatch is capable of measuring: 1/10 seconds elapsed up to one second (top eye). Minutes elapsed up to one hour (middle eye). Seconds elapsed up to one minute (bottom eye) BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “0” positions. To reset stopwatch hands: 1. PULL crown to position “C”. 2. PRESS pusher “A” intermittently until the top eye hand is reset to “0”. 3. PRESS pusher “B” intermittently until the middle and top eye hands is reset to “60”. NOTE: PRESSING and HOLDING either pusher “A” or “B” will cause the hands to continue to move until the pusher is released. 5 If the stopwatch hands move improperly: 1. PULL out the crown to “B” position. 2. PRESS pushers “A” & “B” simultaneously for three seconds. 3. RELEASE pushers, stopwatch hands will move 180 degrees. 4. PUSH crown in to “A” position.

Standard stopwatch measurement: 1. PRESS pusher “A” to start timing. 2. PRESS pusher “A” to stop timing. 3. PRESS pusher “B” to reset. 8

Timing 2 competitors:

WOMENS

4. PUSH crown in to “A” position. Standard stopwatch measurement: 1. PRESS pusher “A” to start timing. 2. PRESS pusher “A” to stop timing. 3. PRESS pusher “B” to reset. Timing 2 competitors: 1. PRESS pusher “A” to start timing. 2. PRESS pusher “B” to stop timing. 3. PRESS pusher “A” to stop timing of second event. 4. PRESS pusher “B” to view time of second event. 5. PRESS pusher “B” to reset. Split time: 1. PRESS pusher “A” to start timing. 2. PRESS pusher “B” to split. 3. PRESS pusher “B” to begin again. 4. PRESS pusher “A” to stop. 5. PRESS pusher “B” to reset.

6

9

WOMENS

6,12 TWO-EYE CHRONOGRAPH WITH DATE CHRONOGRAPH MINUTE HAND

CHRONOGRAPH SECOND HAND

SECOND

Crown position “A” , “B” & “C”. Pushers “A” (top) & “B” (bottom). 12 o’clock eye “1 minute up to maxinum 60 minute”. 6 o’clock eye “second”. This chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH. TIME To set the time: 1. PULL crown to “C” position. 2. TURN crown either way to correct time. 3. PUSH crown in to “A” position, small second hand begins to run.

7

10

WOMENS

CALENDAR To set the calendar: 1. PULL out crown to “B” position. 2. TURN crown clockwise to correct date. 3. PUSH in crown to “A” position. NOTE: The date changes automatically every 24 hours. STOPWATCH The stopwatch is capable of measuring: 1/1 second elapsed up to maxinum of 60 minute (top eye). BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “0” positions. To reset stopwatch hands: 1. PULL crown to position “C”. 2. PRESS pusher “A” intermittently until the chronograph second hand is reset to “0”. Standard stopwatch measurement: 1. PRESS pusher “A” to start timing. 2. PRESS pusher “A” to stop timing. 3. PRESS pusher “B” to reset. Accumulated elapsed time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS pusher “A” to restart timing. 4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset.

8

11

WOMENS

ANA-DIGIT

EL

S2

S1

FEATURES Hour, Minute, Second Month, Date Back Light (EL) NORMAL TIME MODE 1. PRESS S1 once to view Month & Date 2. PRESS S1 twice to view Second 3. PRESS S2 once, ""Time"" & ""Date"" mode will be displayed alternatively PRESS S1 twice, back to Time mode" 4. PRESS EL to light-up display SETTING SEQUENCE 1. PRESS S2 twice to set "Month"; Press S1 to advance 2. PRESS S2 once to set "Date"; Press S1 to advance 3. PRESS S2 once to set "Hour"; Press S1 to advance 4. PRESS S2 once to set "Minute"; Press S1 to advance 5. PRESS S2 once when setting is complete. Normal time will be displayed (Press S1 if time mode does not flash).

9

12

WOMENS

MENS

CONGRATULATIONS ON OWNING YOUR NEW GUESS WATCH. DEVELOPED FROM Congratulations on ELECTRONICS owning your new GUESS Watch. ADVANCED TECHNOLOGY, Developed from advanced electronics technology, the THE MOVEMENT IS MANUFACTURED FROM movement is manufactured fromCOMPONENTS the best quality THE BEST QUALITY ANDcomponents and poweredBYby a longLIFE lifeBATTERY. battery. POWERED A LONG

HIGH PERFORMANCE FEATURES ▼ 30 METERS (3 ATM) TO 100 METERS (10 ATM)

For style with 10 ATM, suitable for swimming, sailing, sail boarding, surfing & shallow diving.

▼ WATER RESISTANT GENUINE LEATHER BANDS

Specially developed water resistant leathers and construction are used in all GUESS straps.

▼ HIGH QUALITY STAINLESS STEEL CASE & BRACELET ▼ MINERAL CRYSTALS

All GUESS watches are manufactured with mineral crystals for increased water and scratch resistance, as well as greater durability.

13

MENS

OPERATING INSTRUCTIONS SIMPLE TIME / MINI SWEEP / DUAL TIME A B

A B

To set the time:

1. PULL out crown to B position. 2. TURN crown either way to correct time. 3. Push in crown to A position.

CALENDAR / DATE To set the time:

1. PULL out Crown to C position. 2. TURN crown either way to correct time. 3. PUSH in crown to A position.

To set the calendar / date:

1. PULL out crown to B position. 2. TURN crown counter clockwise or towards you to correct date. 3. PUSH in crown to A position. NOTE: The date changes automatically every 24 hours.

14

MENS

A B C A B C

A B C

crown position

DAY

24-HOUR DATE

DAY

DAY / DATE / 24DAYHOUR

24-HOUR

A B C

DATE

DATE

DATE

A B C

DAY / DATE DAY / 24 HOUR

DATE

DAY

DATE

A B C

DATE

crown position

A B C

DAY DAY

DAY 24-HOUR

24-HOUR 24-HOUR

24-HOUR DAY

MONTH SETTING BUTTON

A B C

DATE DAY

24-HOUR

DAY

DAY

DAY MONTH SETTING BUTTON 24-HOUR

1. PULL out24-HOUR crown to C position. 2. TURN crown either way to correct time. A B C DAY 24-HOUR 3. PUSHDATE in crown toMONTH A position. SETTING BUTTON

ToDAYset date:

24-HOUR

1 2 3

DATE

To set time:

crown 24-HOUR position DATE

24-HOUR

DAY

MONTH

A B C

A B C

DAY

MONTH crown position

24-HOUR DATE

DAY

SECOND

A B C 24-HOUR DATE

crown position

DATE

DATE 24-HOUR

24-HOUR

1 2 3

DATE

DAY

A B C

MONTH

DATE

DAY

crown DAYMONTH SETTING DATE position BUTTON DATE A BA CB C

DAY A B C DAY

A B C

A B C

DATE

crown position

crown DAY position

24-HOURA B C

24-HOUR DATE

A B C DATE

DATE

To set time:

A B CDAY

DATE

A B C 24-HOUR

DATE

A B C

position

A B C DATE

1 2 3 A B crown C

crown position SECOND

DATE

24-HOUR

crown position 24-HOUR

1. PULL out crown to C position. 2. TURN24-HOUR crown either way to correct time. A B C 3. PUSH A B Cin crown to A position.

To setDATE date:

A B C

crown position

NOTE the date changes automatically every 24 hours. DAY 24-HOUR 24-HOUR SECOND DATE NOTE the date changes automatically every 24 hours. 1. PULL out crown to B position. crown position DATE 1. PULL out crown to MONTH B position. 2. TURN crown clockwise to correct date. To set time: 2. TURN crown clockwise to correct date. SECOND 3.24-HOUR PUSH in crown to A position. 24-HOUR 1. PULL out crown to C position. DATE 3. PUSH in crown to A position. 2. TURN crown either way to correct time. To set time: 3. PUSH in crown to A position. To set day: 1. ToPULL out crown to C position. set day: 1. PULL out crown to C position. 2. 1. TURN crown either way to correct time. PULL out crown to C position. 2. Advance time 24 hours to change the day. To set date: 3. 2. PUSH in crown position. Advance timeto24Ahours to change the day. 3. PUSH in crown to A position. NOTE the date changes automatically every 24 hours. 3. PUSH in crown to A position. NOTE: 24 hour indicator can change only when setting the time. 1. PULL out crown to B position. ToNOTE: set date: 24 hour indicator can change only when setting the time. 2. TURN crown clockwise to correct date. NOTE the date changes automatically every 24 hours. To set month: 3. PUSH in crown to A position. 1. ToPULL out crown to B position. set month: Push month setting button until the small hand of month is set to the correc 2. Push TURN crown clockwise correct date. hand of month is set to the correct month. month setting buttontountil the small To set day: 3 3. PUSH in crown to A position. 1. PULL out crown to C position. 3 2. Advance time 24 hours to change the day. To set day: 3. PUSH in crown to A position. 1. PULL out crown to C position. NOTE: 24 hour indicator can change only when setting the time. 15 MENS 2. Advance time 24 hours to change the day. 3. PUSH in crown to A position. A B C

To set month:

DATE / 24 HOUR

2•

4•

6•8

• 10 •

12 • 14 • 16 • 1 8•2 0•

22 •

4•

6•8

• 10 •

12 • 14 • 16 • 1 8•2 0•

22 • 24

2•

24

0•

DATE / 24 HOUR

1. PULL out Crown to C position. 2. TURN To set theCrown time:either way to correct time. 3. in Crown 1. PUSH PULL out CrowntotoACposition. position. 2. TURN Crown either way to correct time. To thein24 hourtoindicator: 3. set PUSH Crown A position. 1. PULL out Crown to B position. 2. TURN counter-clockwise To set theCrown 24 hour indicator: to correct time. 3. PUSH in Crown to 1. PULL out Crown toABposition. position. 2. TURN Crown counter-clockwise to correct time. To theindate: 3. set PUSH Crown to A position. 1. PULL out Crown to B position. 2. TURN To set theCrown date:clockwise to correct date. 3. in Crown 1. PUSH PULL out CrowntotoABposition. position. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to A position.

0•

To set the time:

DAY / DATE / 24 HOUR DAY / DATE / 24 HOUR Crown

Day Date Day 24 Hour

Crown

Day

Crown

Day

Date

Date 24 Hour To set the time:

Crown

24 Hour Date 24 Hour To

set the day:

the day: 1. PULL out Crown to C position. 1. PULL out CrownTotoset C position. 1. PULL out Crown to C position. 2. TURN To set theCrown time:clockwise/counter-clockwise to correct time. 2. Advance time 24 hours to change the day. time 24 hours to change the day. 3. PUSH in Crown to A position. 3. in Crown 1. PUSH PULL out Crown2.totoAAdvance Cposition. position. 3. PUSH in Crown to A position. 2. TURN Crown clockwise/counter-clockwise to correct time. Note: 24 Hour indicator changes automatically when time is ad To set the date: 3. PUSH in Crown to A position. Note: 24 Hour indicator changes automatically when time is adjusted. 1. PULL out Crown to B position. 2. TURN To set theCrown date:counter-clockwise to correct date. 3. PUSH in 1. PULL outCrown CrowntotoABposition. position. 2. TURN Crown counter-clockwise to correct date. 16 MENS THE THREE EYE CHRONO 3. PUSH in Crown to A position. THE4 THREE EYE CHRONOGRAPH

THE THREE EYE CHRONOGRAPH THE THREE EYE CHRONOGRAPH

This chronograph watch has 2 functions: TIME, STOPWATCH. This chronograph watch has 2 functions:

The left eye (stopwatch hand) measures minutes TIME, STOPWATCH. elapsed onhand) stopwatch, up tominutes a maximum of 60 minutes. The left eye (stopwatch measures The centre eye (stopwatch hand) elapsed on stopwatch, up to a maximum of 60 measures minutes. seconds elapsed on stopwatch, up to a maximum The centre eye (stopwatch hand) measures seconds of 60 seconds. It also shows time. elapsed on stopwatch, up measurement to a maximum of of elapsed 60 seconds. The right eye (24 hour hand) indicates time on a 24 hour It also shows measurement of elapsed time. basis. The right eye (24 hour hand) indicates time on a 24 hour basis.

TIME

To set time: To set time: 1. PULL out crown to B position TURN either way to correct time 1. PULL out2.crown to Bcrown position 3. PUSH crown A position 2. TURN crown either way to to correct time NOTE: If eye indicating 24 hours needs adjustment, advance watch hands by 12 hours. 3. PUSH crown to A position

TIME

NOTE: If eye indicating 24 hours needs adjustment, advance watch hands by 12 hours.

STOPWATCH: The stopwatch can measure up to 1 hour in minutes and seconds. Before using the stopwatch STOPWATCH:

ensure that stopwatch at the and ‘60’ or ‘12 o’clock’ position. The stopwatch can measure up to 1hands hour inare minutes seconds. Before using the stopwatch ensure that stopwatch hands are at the ‘60’ or ‘12 o’clock’ position. To adjust hands: 1. PULL out Crown to B positions. To measure elapsed or split time: To measure or split time: To adjust hands: To measure elapsed or split time: elapsed 2. PRESS pusher A or B to adjust hands. ure elapsed or split time: measure elapsed or split time: 1. PRESS pusher A to start timing. 1. timing. PRESS pusher A to start timing. 1. PULL out Crown to B positions. 1. PRESS pusher A to start 3. timing. PUSH to A hands. position. S PRESS pusher pusher A2.to PRESS start timing. A to start 2. B PRESS to stopwatch stopBtiming. The stopwatch continues toelapsed count 2. pusher PRESSBThe pusher to stop timing. The stopwatch continues pusher A or Crown B to adjust elapse 2. PRESS pusher to stop timing. continues to count seconds not move. S PRESS pusher pusher B3.to PUSH stop timing. The continues to counttoseconds elapsed butmove. thehands do not move. B to stop timing. The stopwatch continues count hands seconds but thedohands doelapsed not Crown to Astopwatch position. s do not move. hands do not move. To set stopwatch: 3. B PRESS Bpusher again toB resume PRESS again totiming. resume timing. 3. PRESS pusher again3.topusher resume timing. 1. PRESS pusher A to start timing. S PRESS pusher pusher BToagain to resume timing. B again to resume timing. The hands move quickly to indicate elapsed and time continue co The hands move quickly to indicate elapsed and con The hands move quickly to indicate elapsed time and continuetime counring. set stopwatch: 2. PRESS pusher A to stop timing. ands quickly to indicate elapsed time and continue counring. The move hands move quickly to indicate elapsed time and continue counring. NOTE: The hour, minute and second hands on the watch will continue NOTE: The hands hour, minute second hands on watchthe willc NOTE: The hour, minute and second on theand watch will continue to the indicate 1. PRESS pusher A to start timing. 3. PRESS pusher B tothe reset stopwatch ‘60’. while theusing stopwatch. he hour, and second hands on the watch will continue to to indicate the correct time while the stopwatch. OTE: Theminute hour, minute and second hands on watch will continue to indicate the correct timeusing while using the stopwatch. 2. PRESS pusher A to stop timing. hile using the stopwatch. while3. using the stopwatch. PRESS pusher B to reset stopwatch to ‘60’. 5 hands If stopwatch hands notwhen return “60” when stopwatch is re If stopwatch hands do not return to “60” when the stopwa If stopwatch do not return to do “60” thetostopwatch isthe reset: tch hands do not do return “60”towhen stopwatch is reset: stopwatch hands not to return “60”the when the stopwatch is reset: 1. PULL out the crown. 1. PULL out the crown. 1. PULL out the crown. 5 out the out crown. PULL the crown. 2. APRESS pushers B repeatedly move hands “60” position. PRESS Apushers Ahands or B repeatedly to moveto hands to “60” 2. PRESS pushers or B2.repeatedly toormove toto“60” position. S PRESS pusherspushers A or B repeatedly to movetohands “60” to position. A or B repeatedly move to hands “60” position. 3. PUSH3.in PUSH the crown. in the crown. 3. PUSH in the crown. inPUSH the crown. in the crown. 17

MENS

6,9,12 THREE-EYE CHRONOGRAPH WITH & WITHOUT DATE

TIME

TIME To set the time: Crown position “A”, “C”. 1. PULL Crown to “B” “C” &position. Pushers “A”Crown (top) &either “B” (bottom) 2. TURN way to correct time. 12 “1/10 elapsed” 3. o’clock PUSH eye Crown intoseconds “A” position. 9 o’clock eye “minutes elapsed” 6CALENDAR o’clock eye “seconds elapsed” To set the calendar: This chronograph watch has 3 functions: 1. PULL out Crown to “B” position. TIME, CALENDAR, STOPWATCH 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to “A” position. NOTE: The date changes automatically every 24 hours.

TIME STOPWATCH To set the time:

6

ThePULL stopwatch of measuring: 1. Crown is to capable “C” position. 1/10TURN seconds elapsed second (top eye). 2. Crown either up waytotoone correct time. Minutes oneposition. hour (middle eye). 3. PUSHelapsed Crown up intoto“A” Seconds elapsed up to one minute (bottom eye)

To set the time: 1. PULL Crown to “C” position. 2. TURN Crown either way to correct time. 3. PUSH Crown into “A” position.

CALENDAR To set the calendar: 1. PULL out Crown to “B” position. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to “A” position. NOTE: The date changes automatically every 24 hours.

STOPWATCH The stopwatch is capable of measuring: 1/10 seconds elapsed up to one second (top eye). Minutes elapsed up to one hour (middle eye). Seconds elapsed up to one minute (bottom eye)

CALENDAR

BEFORE USING THE STOP WATCH, reset the stopwatch hands to the BEFORE THE STOP WATCH, reset the stopwatch hands to the “60” and “0” positions. To set theUSING calendar: 1. PULL out Crown to “B” position. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to “A” position. NOTE: The date changes automatically every 24 hours. 2,6,10 THREE-EYE CHRONOGR

STOPWATCH

2,6,10 THREE-EYE CHRONOGRAPH

The stopwatch is capable of measuring: NOTE: Crown position “1”, “2” & “3”

NOTE: Crown position “1”, “2” & “3” NOTE: Pushers “A” (top) & “B” (bottom)

18

MENS

2,6,10 THREE-EYE CHRONOGRAPH NOTE: Crown position “1”, “2” & “3” NOTE: Pushers “A” (top) & “B” (bottom) NOTE: Left eye “minute totalizer” NOTE: Right eye “small second” NOTE: Centre eye “date indicator”

This chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH

TIME To set the time: 1. PULL Crown to position “3” . 2. TURN Crown either way to correct time. 3. PUSH Crown to position “1” .

CALENDAR To set the calendar: 1. PULL Crown to position “2” . 2. TURN Crown clockwise to correct the date. 3. PUSH in Crown to position “1” .

7

STOPWATCH The stopwatch is capable of measuring: 1. Minutes elapsed up to 30 minutes (left eye). 2. Chronograph hand 1/5 second BEFORE USING THE STOPWATCH, reset the stopwatch hands to the “60” position by mean of pusher “B”. If stopwatch Hands move improperly, reset the hands as follow: To reset stopwatch hands: 1. PRESS Pusher “A” & “B”. 2. PRESS Pusher “B” intermittently until the left eye hand is reset to “0”. 3. PRESS Pusher “A” intermittently until the chronograph hand reset to “60”. 4. PRESS Pusher “A” & “B”. NOTE: PRESSING and HOLDING either Pusher “A” or “B” will cause the hands to continue to move until the pusher is released. Standard stopwatch measurement:

19

MENS

3. PRESS Pusher “A” intermittently until the chronograph hand reset to “60”. 4. PRESS Pusher “A” & “B”. NOTE: PRESSING and HOLDING either Pusher “A” or “B” will cause the hands to continue to move until the pusher is released. Standard stopwatch measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “B” to reset. Accumulated elapsed time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “A” to restart timing. 4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset. Split time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “B” to split. 3. PRESS Pusher “B” to begin again. 4. PRESS Pusher “A” to stop. 5. PRESS Pusher “B” to reset. Timing 2 competitors: 1. PRESS Pusher “A” to start timing of first event.8 2. PRESS Pusher “B” to stop timing of first event. Stopwatch continues to run internally. 3. PRESS Pusher “A” to stop timing of second event. 4. PRESS Pusher “B” to view time of second event. 5. PRESS Pusher “B” to reset.

6,12 TWO-EYE CHRONOGRAPH WITH DATE Crown position “A” , “B” & “C”. Pushers “A” (top) & “B” (bottom). 6 o’clock eye “1 minute up to maxinum 60 minute”. 12 o’clock eye “second”.

This chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH.

STOPWATCH SECOND

20

MENS

6,12 TWO-EYE CHRONOGRAPH WITH DATE Crown position “A” , “B” & “C”. Pushers “A” (top) & “B” (bottom). 6 o’clock eye “1 minute up to maxinum 60 minute”. 12 o’clock eye “second”.

STOPWATCH SECOND

This chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH.

TIME To set the time: 1. PULL Crown to “C” position. 2. TURN Crown either way to correct time. 3. PUSH Crown in to “A” position, small second hand begins to run.

SECOND HAND STOPWATCH MINUTE

CALENDAR To set the calendar: 1. PULL out Crown to “B” position. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to “A” position. NOTE: The date changes automatically every 24 hours.

STOPWATCH The stopwatch is capable of measuring: 1/1 second elapsed up to 12 hours. BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “0” positions. Standard stopwatch measurement: 1. PRESS Pusher “A” to start timing. To reset stopwatch hands: 2. PRESS Pusher “A” to stop timing. 1. PULL Crown to position “C”. 3. PRESS to reset. 2. PRESS Pusher “A” intermittently until the chronograph secondPusher hand is“B” reset to “0”. Standard stopwatch measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “B” to reset. Accumulated elapsed time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “A” to restart timing.

9

Accumulated elapsed time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “A” to restart timing. 4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset. 21

MENS

3,6,9,12 FOUR-EYE CHRONOGRAPH NOTE: NOTE: NOTE: NOTE: NOTE: NOTE:

Crown position “A” & “B” Pushers “A” (top) & “B” (bottom) 12 o’clock eye “1/10” or seconds elapsed” 9 o’clock eye “minutes elapsed” 6 o’clock eye “seconds elapsed” 3 o’clock eye “24-hour”

This chronograph watch has 2 functions:

STOPWATCH MINUTE

TIME, STOPWATCH.

24-HOUR

STOPWATCH SECOND

TIME To set the time: 1. PULL Crown to “B” position. 2. TURN Crown either way to correct time. 3. PUSH Crown in to “A” position.

STOPWATCH The stopwatch is capable of measuring: 1/10 seconds elapsed up to 60 minutes (top eye). Minutes elapsed up to one hour (middle eye). Seconds elapsed up to one minute (bottom eye) BEFORE USING THE STOPWATCH, reset the stopwatch hands to the “60” and “0” positions.

10

22

MENS

To reset stopwatch hands: 1. PULL Crown to position “B”. 2. PRESS Pusher “A” intermittently until the top eye hand is reset to “0”. 3. PRESS Pusher “B” intermittently until the minute and second eye hands reset to “60”. NOTE: PRESSING and HOLDING either Pusher “A” or “B” will cause the hands to continue to move until the pusher is released. Standard stopwatch measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “B” to reset. Accumulated elapsed time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “A” to restart timing. 4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset. Split time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “B” to stop split. 3. PRESS Pusher “B” to begin again. 4. PRESS Pusher “A” to stop. 5. PRESS Pusher “B” to reset.

23

MENS

3,6,9, THREE-EYE CHRONOGRAPH WITH DATE 24-HOUR

STOPWATCH MINUTE STOPWATCH SECOND

24-HOUR

STOPWATCH MINUTE STOPWATCH SECOND

Crown position “A”, “B” & “C”. Pushers “A” (top) & “B” (bottom). 3 o’clock eye “24-hour”. 9 o’clock eye “minutes elapsed”. 6 o’clock eye “seconds elapsed”.

This chronograph watch has 2 functions: TIME, STOPWATCH.

TIME To set the time: 1. PULL Crown to “B” position. 2. TURN Crown either way to correct time. 3. PUSH Crown in to “A” position.

CALENDAR To set the calendar: 1. PULL out Crown to “B” position. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to “A” position. NOTE: The date changes automatically every 24 hours.

STOPWATCH The stopwatch is capable of measuring: Minutes elapsed up to one hour (left eye). Seconds elapsed up to one minute (bottom eye)

24

MENS

3. PUSH in Crown to “A” position. NOTE: The date changes automatically every 24 hours.

STOPWATCH The stopwatch is capable of measuring: Minutes elapsed up to one hour (left eye). Seconds elapsed up to one minute (bottom eye) BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “12 o’clock” positions. 12 To reset stopwatch hands: 1. PULL Crown to position “B”. 2. PRESS Pusher “A” or “B” intermittently until the stopwatch minute and second hand is reset to “0”. NOTE: By pressing Pusher “A”, the hands move counter clockwise. By pressing Pusher “B”, the hands move clockwise. Standard stopwatch measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “B” to reset. Split time: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “B” to stop split. 3. PRESS Pusher “B” to begin again. 4. PRESS Pusher “A” to stop. 5. PRESS Pusher “B” to reset. Accumulated elapsed time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “A” to restart timing. 4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset.

25

MENS

6, 9, 12 THREE EYE 1/20 SECOND CHRONOGRAPH WITH DATE Crown position “A”, “B” & “C”. Pushers “A” (top) & “B” (bottom). 6 o’clock eye “hour & minutes elapsed”. 9 o’clock eye “second”. 12 o’clock eye “1/20 seconds elapsed”.

1/20 SECONDS STOPWATCH SECOND PUSHER A crown position

SECOND

A B C

This chronograph watch has 3 functions:

PUSHER B

TIME, STOPWATCH, CALENDA.

TIME

STOPWATCH HOUR

STOPWATCH MINUTE

To set the time: 1. PULL Crown to “C” position. 2. TURN Crown either way to correct time. 3. PUSH Crown in to “A” position.

CALENDAR To set the calendar: 1. PULL out Crown to “B” position. 2. TURN Crown clockwise to correct date. 3. PUSH in Crown to “A” position. NOTE: The date changes automatically every 24 hours. Do not set the date between 9:00 PM and 1:00 AM.

STOPWATCH The stopwatch is capable of measuring: Hour & Minutes elapsed up to 12 hours (bottom eye). 1/20 Seconds elapsed up to 12 hours (top eye). Seconds elapsed up to 12 hours. BEFORE USING THE STOP WATCH, reset the stopwatch hands to the “60” and “12 o’clock” positions. To reset stopwatch hands: 1. PULL Crown to position “C”. 2. PRESS Pusher “A” for 2 seconds until the stopwatch hour, minute and second hand is reset to “0”.

26

MENS

Standard stopwatch measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “B” to reset. Split time: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “B” to stop split. 3. PRESS Pusher “B” to begin again. 4. PRESS Pusher “A” to stop. 5. PRESS Pusher “B” to reset. Accumulated elapsed time measurement: 1. PRESS Pusher “A” to start timing. 2. PRESS Pusher “A” to stop timing. 3. PRESS Pusher “A” to restart timing. 4. PRESS Pusher “A” to stop 2nd timing. 5. PRESS Pusher “B” to reset. Timing 2 competitors: 1. PRESS pusher “A” to start timing. 2. PRESS pusher “B” to stop timing of first event. Stopwatch continues to run internally. 3. PRESS pusher “A” to stop timing of second event. 4. PRESS pusher “B” to view time of second event. 5. PRESS pusher “B” to reset.

DIGITAL WITH ALARM / DUAL TIME / CHRONOGRAPH

CHANGE MODE

EL

S1

DUAL TIME

S3

S2

SETTING

FEATURES

Hour, Minute, Second Day, Date, Month Dual Time, Alarm, Timer

27

MENS

DIGITAL WITH ALARM / DUAL TIME / CHRONOGRAPH

CHANGE MODE

EL

S1

DUAL TIME

S3

S2

SETTING

FEATURES

Hour, Minute, Second Day, Date, Month Dual Time, Alarm, Timer Chronograph 1/100 Second with Split Back Light (EL)

OPERATION MODES 1. 2. 3. 5. 6.

15

PRESS S3 once to view Time, Day, Date, Month PRESS S3 once to view Alarm PRESS S3 once to view Chrono PRESS S3 once to set Timer PRESS S3 again back to Time mode

SETTING SEQUENCE A) NORMAL TIME SETTING . 1. HOLD S2 2 seconds to set "Second"; Press S1 for 00 2. PRESS S3 once to set "Minute"; Press S1 to advance 3. PRESS S3 once to set "Hour"; Press S1 to advance 4. PRESS S3 once to set hour display; Press S1 to set "12H" / "24H" 5. PRESS S3 once to set "Month"; Press S1 to advance 6. PRESS S3 once to set "Date"; Press S1 to advance 7. PRESS S3 once to set "Day"; Press S1 to advance 8. PRESS S2 once when setting is complete. Normal time will be displayed. B) DUAL TIME SETTING . 1. PRESS S1 to Dual Time 2. HOLD S2 2 seconds to set "Minute"; Press S1 for 00 3. PRESS S3 once to set "Hour"; Press S1 to advance 4. PRESS S2 once when setting is complete. Normal time will be displayed. C) ALARM SETTING PRESS S3 to Alarm Mode

28

MENS

3. PRESS S3 once to set "Hour"; Press S1 to advance 4. PRESS S2 once when setting is complete. Normal time will be displayed. C) ALARM SETTING PRESS S3 to Alarm Mode 1. PRESS S1 once to on "Alarm" ONLY 2. PRESS S1 once to on "Chime" ONLY 3. PRESS S1 once to on "Alarm" & "Chime" 4. PRESS S1 once to off "Alarm" & "Chime" 5. HOLD S2 2 seconds to set "Hour"; Press S1 to advance 6. PRESS S3 once to set "Minute"; Press S1 to advance 7. PRESS S2 once when setting is complete. Return to Alarm Mode. D) CHRONOGRAPH PRESS S3 twice to Chronograph function 1. PRESS S1 to "Start" / "Stop" timing 2. PRESS S2 to "Split" time 3. PRESS S1, then S2 to "Reset" E) TIMER PRESS S3 three times to Time Mode 1. HOLD S2 2 seconds to set "Hour"; Press S1 to advance 16 2. PRESS S3 once to set "Minute"; Press S1 to advance 3. PRESS S2 once when setting is complete. 4. RESS S1 to "Start" / "Stop" 5. PRESS S2 to "Reset" When counting complete, alarm will sound.

ANA-DIGIT EL

S2

FEATURES

Hour, Minute, Second Month, Date

S1

29

MENS

ANA-DIGIT EL

S2

S1

FEATURES

Hour, Minute, Second Month, Date Back Light (EL)

NORMAL TIME MODE

1. PRESS S1 once to view Month & Date 2. PRESS S1 twice to view Second 3. PRESS S2 once, ""Time"" & ""Date"" mode will be displayed alternatively PRESS S1 twice, back to Time mode" 4. PRESS EL to light-up display

SETTING SEQUENCE 1. 2. 3. 4. 5.

PRESS S2 twice to set "Month"; Press S1 to advance PRESS S2 once to set "Date"; Press S1 to advance PRESS S2 once to set "Hour"; Press S1 to advance PRESS S2 once to set "Minute"; Press S1 to advance PRESS S2 once when setting is complete. Normal time will be displayed (Press S1 if time mode does not flash). 17

30

MENS

DIGITAL WITH ALARM, CHRONOGRAPH 1/100 SEC, COUNTDOWN & DUAL TIME FEATURES

Hour, Minute, Second Day, Date, Month Dual Time, Alarm, Countdown Chronograph 1/100 Second with lap control Back Light (EL)

EL

S1

S3

S2

SETTING SEQUENCE A) NORMAL TIME SETTING 1. HOLD S2 3 seconds to “Second”; Press S1 or S3 for 00 2. PRESS S2 once to set “Minute”; Press S1 or S3 to advance / backward 3. PRESS S2 once to set “Hour”; Press S1 or S3 to advance / backward 4. PRESS S2 once to set “Year”; Press S1 or S3 to advance / backward 5. PRESS S2 once to set “Month”; Press S1 or S3 to advance / backward 6. PRESS S2 once to set “Day”; Press S1 or S3 to advance / backward 7. HOLD S2 3 seconds to return to normal time display. B) DUAL TIME SETTING 1. PRESS S1 to Dual Time 2. HOLD S2 2 seconds to set "Minute"; Press S1 for 00 3. PRESS S3 once to set "Hour"; Press S1 to advance 4. PRESS S2 once when setting is complete. Normal time will be displayed. C) ALARM SETTING PRESS S3 to Alarm Mode 1. PRESS S1 to "Alarm 1" – “Alarm 5” 2. HOLD S2 2 seconds until “AL” flash PRESS S1/S3 to set “Alarm” / “Chime” 3. PRESS S2 once to set “Hour” Press S1 or S3 to advance / backward 4. PRESS S2 once to set “Minute” Press S1 or S3 to advance / backward 5. HOLD S2 3 seconds when setting is complete. Return to Alarm Model. D) COUNTDOWN TIMER SETTING (i) PRESS S3 twice to Countdown Timer function [T1] (1~90 mins) 1) HOLD S2 2 seconds to set "Minute"; Press S1/S3 to advance / backward 2) HOLD S2 3 sec to end setting 3) PRESS S2 to start/stop countdown

31

MENS

4. PRESS S2 once to set “Minute” Press S1 or S3 to advance / backward 5. HOLD S2 3 seconds when setting is complete. Return to Alarm Model. D) COUNTDOWN TIMER SETTING (i) PRESS S3 twice to Countdown Timer function [T1] (1~90 mins) 1) HOLD S2 2 seconds to set "Minute"; Press S1/S3 to advance / backward 2) HOLD S2 3 sec to end setting 3) PRESS S2 to start/stop countdown (ii) PRESS S1 to get into Countdown timer [T2] (from normal time to preset time – within 24hrs) 1) HOLD S2 3 seconds to set "Hour"; Press S1/S3 to advance / backward 18S3 to advance / backward 2) PRESS S2 once to set “Minute” Press S1 or 3) HOLD S2 3 sec to end setting 4) PRESS S2 to start/stop countdown. Time different between Normal time & Preset time will be shown (iii) PRESS S1 to get into Countdown Day Timer [T3] 1) HOLD S2 3 seconds to set “Year"; Press S1/S3 to advance / backward 2) PRESS S2 once to set “Month” Press S1 or S3 to advance / backward 3) PRESS S2 once to set “Day” Press S1 or S3 to advance / backward 4) PRESS S2 once when setting is complete. E) CHRONOGRAPH PRESS S3 three times to Chronograph Mode 1) PRESS S1 to select LAP (LAP) or Split (SPL) option 2) PRESS S2 to start/stop 3) PRESS S1 to get Lap/Split time 5) HOLD S2, then press S1 to “Reset”

32

MENS

Smile Life

When life gives you a hundred reasons to cry, show life that you have a thousand reasons to smile

Get in touch

© Copyright 2015 - 2024 PDFFOX.COM - All rights reserved.