Mechanical Engineering - New Age International [PDF]

NEW AGE INTERNATIONAL (P) LTD., PUBLISHERS HEAD OFFICE 7/30 A, Daryaganj, New Delhi-110 002 (INDIA) Tel.: (011) 23253771, 23253472 • Fax: 23267437 E-mail: [email protected]

MECHANICAL ENGINEERING LU C

DELHI

KN

OW

GUWAHATI

22, Golden House, Daryaganj, New Delhi-110 002 Tel.: (011) 23262370, 23262368 Telefax: 43551305 E-mail: [email protected]

16-A, Jopling Road, Lucknow-226 001 Tel.: (0522) 2209578, 4045297 Telefax : 2204098 E-mail: [email protected]

A AT LK O K Hemsen Complex, Mohd. Shah Road, Paltan Bazar, Near Starline Hotel, Guwahati-781 008 Tel.: (0361) 2513881, Telefax: 2543669 E-mail: [email protected]

MUMBAI HYDERABAD

142C, Victor House, Ground Floor, N.M. Joshi Marg, Lower Parel, Mumbai- 400 013 Tel.: (022) 24927869 Telefax: 24915415 E-mail: [email protected]

RDB Chambers (Formerly Lotus Cinema)106A, 1st Floor, S.N. Banerjee Road, Kolkata-700 014 Tel.: (033) 22273773, Telefax : 22275247 E-mail: [email protected]

BANGALORE 37/10, 8th Cross (Near Hanuman Temple), Azad Nagar, Chamarajpet, Bangalore-560 018, Tel.: (080) 26756823 Telefax: 26756820, E-mail: [email protected]

CC-39/1016, Carrier Station Road, Ernakulam South, Cochin-682 016, Tel.: (0484) 2377004 Telefax: 4051303 E-mail:[email protected]

AI

N EN

CH

COCHIN

105, 1st Floor, Madhiray Kaveri Tower, 3-2-19, Azam Jahi Road, Nimboliadda, Hyderabad-500 027 Tel.: (040) 24652456, Telefax: 24652457 E-mail: [email protected]

26, Damodaran Street, T. Nagar, Chennai-600 017, Tel.: (044) 24353401 Telefax : 24351463 E-mail: [email protected]

Visit us at www.newagepublishers.com Branches: New Delhi • Bangalore • Chennai • Cochin • Guwahati • Hyderabad • Kolkata • Lucknow • Mumbai

NEW AGE INTERNATIONAL PUBLISHERS

NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS Established in 1966, New Age International is among the world’s leading publishers of educational textbooks and reference books. It has published 2000+ titles in various disciplines of Science and Technology, Management and Commerce, Medical Sciences, Social Sciences and Humanities. Authored by eminent academics and professionals from Indian Institute of Technology and Indian Institute of Management and other internationally-renowned institutions, these titles are being profitably used by a wide spectrum of teachers and students. New Age International has three offices in New Delhi and eight branch offices in the metropolitan cities of India. It also has a number of accounts with other distributors, stockists and retailers. The promotion, marketing and distribution activities of the company are performed by the branches in conjunction with their local dealers. The editorial and the production units are located at the Head Office in New Delhi. New Age International publishes around 125 new titles/editions each year. Titles are taken up for publication only after its contents have been evaluated by a panel of editorial and subject experts. The organisation emphasises quality norms in terms of both editorial content and physical inputs like paper, printing and binding. The focus of the company is on providing authentic, reliable and user-friendly books at affordable prices.

Complimentary copies of books in this catalogue are available on formal request by the teachers who wish to consider these for possible course adoption. To request for a complimentary copy, please write to our head office only. Please include your position, the course title and approximate enrolment, text currently in use. Complimentary copies will not be sent without this information. It is also necessary to send the syllabus of your university for the course, you are requesting a specimen copy.

All prices are subject to change without prior notice. Prices are indicated in Indian th

Rupees. This Price List is up-to-date as on 15 January 2012. For further information;

Please visit us our website www.newagepublishers.com

Attention

Authors !

We have 1.

A team of dedicated editors and production specialists to ensure that your book has the features which are essential for maximum sale of your book.

2.

An infrastructure for marketing to reach every nook and corner of the world.

3.

Dedicated team of marketing executives to constantly remain in touch with educational and research institutions as well as the book trade.

4.

Twelve branch offices throughout the country to ensure that New Age Publications are available with booksellers and institutional libraries at every possible place.

5.

Up-to-date website www.newagepublishers.com to provide details of New Age Publications and its in-built feature to record e-mail and instantly provide information of our new publications on the subject of one’s choice. Thus, facilitating penetration of the world market.

Proposals may be sent to: Academic Director

MECHANICAL ENGINEERING NEW EDITIONS

TEXTBOOKS

5 COMPUTER AIDED ENGINEERING DRAWING

1 CNC MACHINES Adithan, M., Senior Professor, Deptt. of Mechanical Engg. and Director, Academic Staff College, VIT University, Vellore Tamil Nadu Pabla, B.S., Professor in Mechanical Engineering, National Instt. of Tech. Teachers’ Training and Res. (NITTTR) Chandigarh

Annaiah, M.H., Professor, Department of Mechanical Engg., M.S. Ramaiah Institute of Technology, Bangalore, Karnataka Patil, Rajashekar, Faculty, Department of Mechanical Engg., Vijayanagar Engineering College, Bellary, Karnataka Contents: Drawing Instruments and their Uses • Line Types, Dimension and Lettering • Use of Instruments • Orthographic Projection • Projection of Points • Projection of Lines • Projection of Plane Surfaces • Projection of Solids • Development of Surfaces • Isometric Projection/Isometric Drawing.

Contents: Introduction to Numerical Control of Machines • Components of Numerical Control System • Classification of Numerical Control Machines • Constructional Details of CNC Machines • Fundamentals of Part Programming • Part Programming Using Subroutines, Do Loops and Canned Cycles • Computer-aided Part Programming • Tooling for CNC Machines • Maintenance of CNC Machine Tools • CNC Machine and Automation. ISBN: 978-81-224-3426-2 Pages: 168 Price: 175.00

Publication Year: 2012 Paperback

ISBN: 978-81-224-2779-0 Reprint: 2011 Pages: 536

Edition: 3rd

6 NANO MATERIALS Bandyopadhyay, A.K., Professor, Govt. College of Engineering & Ceramic RNATIO EDITION Technology, Kolkata, W.B. PUBLISHED Contents: General Introduction • Silicon Carbide • Nano Particles of Alumina and Zirconia • Mechanical Properties • Magnetic Properties • Electrical Properties • Optical Properties • Other Methods and Other Nano Materials.

Adithan, M., Senior Professor Deptt. of Mechanical Engg. and Director, Academic Staff College, VIT University, Vellore Tamil Nadu Contents: Work Study and Ergonomics • Process Planning • Introduction to Cost Estimation • Cost Estimation • Production Cost Estimation • Value Analysis • Value Engineering • Business Process Engineering • Concurrent Engineering • World Class Manufacturing • Internet-Based Manufacturing.

ISBN: 978-81-224-2781-3 Reprint: 2011 Pages: 328

INT E

7 MATHEMATICAL PHYSICS AT RN I O FOR ENGINEERS

Edition: 2nd

EDITION

Bera, R.K., Professor and Head P U B L I S H E D Deptt. of Mathematics, Heritage Institute of Technology, Kolkata, W.B. Bandyopadhyay, A.K., Professor, Govt. College of Engineering and Ceramic Technology, Kolkata, W.B. Ray, P.C., Reader in Mathematics, Govt. College of Engg. and Leather Technology, Kolkata, W.B.

3 DESIGN OF MACHINE ELEMENTS- I Annaiah, M.H., Professor, Department of Mechanical Engg., M.S. Ramaiah Institute of Technology, Bangalore, Karnataka Contents: Introduction • Design for Static and Impact Strength • Design for Fatigue Strength • Threaded Fasteners • Design of Shafts • Cotter Joint and Knuckle Joints, Keys and Couplings • Riveted and Welded Joints • Power Screws. ISBN: 978-81-224-3046-2 Pages: 616 Price: 295.00

Publication Year: 2011 Paperback

Contents: Matrix Algebra • Determinants • Vector Derivatives • Gauss, Green and Stokes’ Theorem • Dirac Delta Function • Differential Calculus • Frobenius Method • Convergence • Orthogonality • Wronskian • Analytic Function • Taylor Series • Laurent Expansion • Singularity • Calculus of Residues (Cauchy Reimann) • Hermite Polynomial • Legendre Polynomial • Laguere Polynomial • Chebyshev Polynomial • Bessel Functions • Fourier Series • Integral Transform and Kernels • Fourier Transform • Convolution Theorem • Parseval Relation • Laplace Transform • Hilbert Transform • Tensor Analysis.

Edition: 1st

ISBN: 978-81-224-2227-6 Pages: 196 Price: 200.00

4 DESIGN OF MACHINE ELEMENTS-II Annaiah, M.H., Professor, Department of Mechanical Engg., M.S. Ramaiah Institute of Technology, Bangalore, Karnataka Contents: Design of Curved Beams • Cylinders and Cylinder Heads • Springs • Spur and Helical Gears • Bevel and Worm Gears • Brakes and Clutches • Lubrication and Bearings • Belt, Rope and Chain Drives. ISBN: 978-81-224-2838-4 Pages: 488 Price: 275.00

Publication Year: 2010 Paperback

Publication Year: 2010 Edition: 2nd Price: 200.00 Paperback

L NA

Publication Year: 2013 Paperback

L NA

INT E

2 PROCESS PLANNING AND COST ESTIMATION

ISBN: 978-81-224-3454-5 Pages: 266 Price: 175.00

Publication Year: 2010 Edition: 4th Price: 250.00 Paperback

Edition: 1st

1

Publication Year: 2008 Paperback

Edition: 1st

MECHANICAL E NGINEERING

TEXTBOOKS

8 ENGINEERING MECHANICS

12 QUANTUM MECHANICS Chaddha, G.S., Former Prof. & Head Deptt. of Physics, Punjab University, Ludhiana, Punjab

INT E

L NA

Bhavikatti, S.S., Emeritus Fellow RNATIO Ex-Professor and Dean NITK EDITION Surathkal, Karnataka, India PUBLISHED

Contents: The Failure of Classical Physics • SchrÖdinger Equation and Principles of Quantum Mechanics • Simple Applications of Quantum Mechanics • The Linear Harmonic Oscillator • Central Potential Problems • Diracs Ket and Bra Notation • Quantum Dynamics • Orbital Angular Momentum and Spin • Angular Momentum: General • Addition of Angular Momenta • Invariance, Symmetry and Conservation Laws • Approximation Methods • Interaction of Radiation with Matter-Semi-Classical Treatment • Quantum Theory of Scattering • Systems of Indentical Particles • Relativistic Quantum Mechanics • Second Quantization. ISBN: 978-81-224-3403-3 Publication Year: 2013 Edition: 2nd Pages: 574 Price: 290.00 Paperback

Contents: Part I: Introduction to Engineering Mechanics • Resultant and Equilibrium of System of Coplanar Concurrent Forces • Resultant and Equilibrium of System of Coplanar Nonconcurrent Forces • Analysis of Pin-jointed Plane Frames • Friction • Lifting Machines • Transmission of Power • Virtual Work Method • Centroid and Moment of Inertia • Centre of Gravity and Mass Moment of Inertia. Part II: Introduction to Dynamics • Linear Motion • Projectiles • Relative Velocity • D’Alembert’s Principle. ISBN: 978-81-224-3373-9 Pages: 512 Price: 299.00

9

Publication Year: 2012 Paperback

NEW EDITIONS

Edition: 4th

FINITE ELEMENT ANALYSIS 13 NON-CONVENTIONAL ENERGY RESOURCES

Bhavikatti, S.S., Emeritus Fellow Ex-Professor and Dean NITK Surathkal Karnataka, India

Chauhan, D.S., Vice-Chancellor, Uttarakhand Technology University, Dehradun Srivastava, S.K., Director, Institute of Engineering and Technology, Lucknow

Contents: Introduction • Basic Equations in Elasticity• Matrix Displacement Formulation • Element Shapes, Nodes, Nodal Unknowns and Coordinate Systems • Shape Functions • Strain Displacement Matrix • Assembling Stiffness Equation-Direct Approach • Assembling Stiffness Equation-Galerkin Method, Virtual Work Method • Assembling Stiffness Equation-Variational Method • Discritization of a Structure • Finite Element Analysis-Bras and Trusses • Finite Element Analysis-Plane Stress and Plane Strain Problems. ISBN: 978-81-224-2770-7 Publication Year: 2010 Edition: 2nd Reprint: 2012 Pages: 346 Price: 275.00 Paperback

Contents: Energy Resources • Solar Cell • Solar Radiation • Solar Energy Collectors • Storage of Solar Energy • Geothermal Energy Magnetohydrodynamic (MHD) Power Generator • Fuel Cell • Thermionic and Thermoelectric Generators • Wind Energy • Biomass • Ocean Thermal Energy Conversion • Tidal and Wave Energy • Hydrogen Energy • Micro Hydel Power. ISBN: 978-81-224-3399-9 Pages: 264 Price: 190.00

10 ENGINEERING MECHANICS AND ELEMENTS OF CIVIL ENGINEERING

Publication Year: 2012 Paperback

Edition: 3rd

14 ENGINEERING MECHANICS

Bhavikatti, S.S., Emeritus Fellow Ex-Professor and Dean NITK Surathkal Karnataka, India Duggal, S.K., Prof. Deptt. of Civil Engg. Motilal Nehru National Institute of Technology, Allahabad, U.P.

Dubey, Arvind Kumar, Director of Arvind’s Physics Centre, Motihari, Bihar Kumar, Anil, Director of Concept Classes, and Educational Consultant, Bangalore, Karnakata Contents: Mathematics and Mechanics • Systems of Units • Vector • Newton’s Laws of Motion • Centroid • Moment of Inertia (Area) • Friction • Coplanar Forces.

Contents: Part A: Elements of Civil Engineering: Unit I: Civil Engineering and Infrastructural Development • Construction Management. Unit II: Materials of Construction • Stone • Bricks • Timber • Mortar • Concrete • Alternate Materials • Composite Materials • Smart Materials. Unit III: Surveying • Total Station • Remote Sensing for Data Extraction • Geographic Information System. Part B: Engineering Mechanics: Fundamental Concept • Coplanar Concurrent Forces • Coplanar Nonconcurrent Forces • Friction • Centroid and Moment of Inertia. ISBN: 978-81-224-1440-0 Publication Year: 2010 Edition: 1st Pages: 348 Price: 125.00 Paperback

ISBN: 978-81-224-2396-9 Reprint: 2011 Pages: 446

Publication Year: 2009 Edition: 1st Price: 295.00 Paperback

15 APPLIED NUMERICAL METHODS USING MATLAB

11 SOLID AND FLUID MECHANICS

Dukkipati Rao V., PhD, PE Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield, Connecticut, USA

Bhavikatti, S.S., Emeritus Fellow Ex-Professor and Dean NITK Surathkal Karnataka, India Kothandaraman, C.P., Former Head Department of Mech. Engg. P.S.G. College of Tech., Coimbatore, Tamil Nadu

Contents: Numerical Computations • Linear System of Equations • Solution of Algebraic and Transcendental Equations • Numerical Differentiation • Finite Differences and Interpolation • Curve Fitting, Regression and Correlation • Numerical Integration • Numerical Solution of Ordinary Differential Equations • Direct Numerical Integration Methods • MATLAB Basics • Optimization • Partial Differential Equations • Answers to Selected Problems.

Contents: Part I: Solid Mechanics: Stability and Equilibrium of Plane Frames • Stresses and Strains in Solids • Principal Stresses and Principal Planes • Shear Force and Bending Moment in Beams • Theory of Simple Bending • Stresses and Deformation in Circular and Hollow Shafts. Part II: Fluid Mechanics: Physical Properties of Fluids • Fluid Statics. ISBN: 978-81-224-2692-2 Publication Year: 2009 Edition: 1st Reprint: 2009 Pages: 496 Price: 250.00 Paperback

ISBN: 978-81-224-3204-6 Pages: 934 Price: 495.00

2

Publication Year: 2011 Paperback

Edition: 1st

MECHANICAL E NGINEERING

TEXTBOOKS

20 NUMERICAL METHODS AT RN I O FOR ENGINEERS

AT RN I O

EDITION

EDITION Dukkipati Rao V., PhD, PE PUBLISHED Fellow of ASME & CSME Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA

Gupta, Santosh K., Professor P U B L I S H E D Department of Chemical Engg. Indian Instt. of Tech., Kanpur, India Contents: Linear Algebraic Equations • Eigenvalues and Eigenvectors of Matrices • Nonlinear Algebraic Equations • Function Evaluation • Ordinary Differential Equations: Initial Value Problems (ODE-IVPs) • Ordinary Differential Equations—Boundary Value Problems (ODE-BVPs) • Partial differential Equations (PDEs).

Contents: Numerical Descriptive Measures • Probability • Random Variables and Probability Distributions • Sampling Distributions • Estimation • Hypothesis Testing • Curve Fitting, Regression and Correlation • Chi-Square Tests • Analysis of Variance • Appendices. ISBN: 978-81-224-2814-8 Pages: 536 Price: 350.00

Publication Year: 2012 Paperback

ISBN: 978-81-224-3359-3 Pages: 346 Price : 299.00

Edition: 1st

17 NUMERICAL METHODS NATIO

Publication Year: 2013 Paperback

Edition: 3rd

INT E

L NA

AT RN I O L NA

21 FLUID MECHANICS AND ITS APPLICATIONS

R

Dukkipati Rao V., PhD, PE EDITION PUBLISHED Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield, Connecticut, USA INT E

L NA

L NA

INT E

For Scientists and Engineers

INT E

16 PROBABILITY AND STATISTICS

NEW EDITIONS

EDITION

Gupta, Vijay., Director, G.D. PUBLISHED Goenka World Institute, Sohna, Haryana Gupta, Santosh K., Professor, Department of Chemical Engineering, Indian Institute of Technology, Kanpur, India Contents: Introduction to Fluid Flows • Forces in Stationary Fluids • Description and Analysis of Fluid Motion • Conservation of Mass • Momentum Theorems • Equation of Motion • Energy Equations • Some Engineering Applications-I • Similitude and Modelling • Some Engineering Applications-II • Approximations in Fluid Mechanics • Inviscid Flows • Boundary Layers • Some Engineering Applications-III • Effects of Compressibility • Introduction to Turbulent Flows.

Contents: Numerical Computations • Linear System of Equations • Solution of Algebraic and Transcendental Equations • Numerical Differentiation • Finite Differences and Interpolation • Curve Fitting, Regression and Correlation • Numerical Integration • Numerical Solution of Ordinary Differential Equations. ISBN: 978-81-224-2813-1 Publication Year: 2010 Edition: 1st Pages: 368 Price: 250.00 Paperback

ISBN: 978-81-224-3041-7 Publication Year: 2011 Pages: 522 Price: 295.00 Paperback

18 FLUID MECHANICS

Edition: 2nd

Through Problems Garde, R.J., Retd. Professor of Hydraulic Engg., Indian Inst. of Technology, Roorkee, Uttarakhand

22 TABLES FOR THE AUTOMOTIVE TRADE Hamm, G. Burk, G.

Contents: Properties of Fluids • Kinematics of Fluid Flow • Equations of Motion and Energy Theorem • Fluid Statics • Applications of Bernoulli’s Equation • Momentum Equation and its Applications • Dimensional Analysis and Similitude • Laminar Flow • Boundary Layer Theory • Turbulent Flow • Problems in Pipe Flow • Forces on Immersed Bodies • Open Channel Flow • Compressible Flow • Pumps • Turbines • Unsteady Flows. ISBN: 978-81-224-3016-5 Reprint: 2012 Pages: 648

Contents: Engineering Calculation • Theory of Automobiles • Information on Materials • Drawing.

ISBN: 978-81-224-3412-5 Pages: 238 Price: 199.00

Publication Year: 2011 Edition: 3rd Price: 350.00 Paperback

19 A TEXTBOOK OF STRENGTH OF MATERIALS

Edition: 15th

23 AN INTRODUCTION TO OPERATIONS RESEARCH

Ghosh, D., Ex-Head, Dept. of Civil Engg., National Instt. of Tech., Durgapur, West Bengal Datta, A.K., Asstt. Prof. of Civil Engg., National Instt. of Tech., Durgapur, West Bengal

Havinal, Veerabhadrappa, Professor and Head Deptt. of Industrial and Production Engg., R.Y.M. Engg. College Bellary, Karnataka Contents: Basics of Operations Research • Linear Programming–Formulation • Linear Programming–Graphical Solution • Linear Programming–Simplex Method and other Techniques • Transportation Models • Assignment Models • Sequencing Models • Theory of Games • Project Management by PERT and CPM • Queuing Models • Replacement Models • Integer Programming • Simulation • Metaheuristics.

Contents: Stress Strain • Thin Pressure Vessel • Shear Force and Bending Moment in Beam • Flexural Stress in Beam • Shear Stress in Beam • Torsion • Beam Deflection • Energy Methods • Column • Transformation of Plane Stress and Plane Strain • Combined Loading • Springs. ISBN: 978-81-224-3080-6 Reprint: 2012 Pages: 642

Publication Year: 2013 Paperback

Publication Year: 2011 Edition: 1st Price: 350.00 Paperback

ISBN: 978-81-224-3335-7 Pages: 344 Price: 250.00

3

Publication Year: 2012 Paperback

Edition: 1st

MECHANICAL E NGINEERING

24 VALUE ENGINEERING

28 PROCESS PLANNING AND COST ESTIMATION

A how to Manual

Kesavan, R., Assistant Prof., Deptt. of Production Technology, M.I.T. Campus, Anna University, Chennai Elanchezhian, C., Assistant Prof., Deptt. of Mechanical Engg., Sri Sai Ram Engineering College, Chennai Ramnath, B. Vijaya, Senior Faculty Deptt. of Mechanical Engg., Sri Sai Ram Engineering College, Chennai

Iyer, S.S., Management Consultant and Certified Value Engineering Specialist Contents: Value Engineering Concept, Theory and Fundamentals • Value Engineering Job Plan Step by Step Application • Project Work, Work Sheets, Objectives, Techniques, Guidelines, Check Lists, Key Questions • Value Engineering Cases.

ISBN: 978-81-224-2405-8 Reprint: 2012 Pages: 296

Publication Year: 2009 Price: 200.00 Paperback

Contents: Work Study • Process Planning • Introduction to Cost Estimation • Cost Estimation • Production Cost Estimation. ISBN: 978-81-224-2605-2 Publication Year: 2009 Edition: 2nd Pages: 252 Price: 150.00 Paperback

Edition: 3rd

25 NUMERICAL METHODS ree C F

D

for Scientific and Engineering Computation Jain, M.K., Professor, Deptt. of Mathematics and Head Computer Services Centre, IIT, Delhi Iyengar, S.R.K., Dean (Academic Affairs) and Professor, Department of Mathematics Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad Jain, R.K., Professor, Department of Mathematics, Indian Institute of Technology, Delhi, India

29 TQM Planning, Design and Implementation Khanna,V.K., Director of Galgotia Business School, Greater Noida, U.P. Vrat, Prem, Vice-chancellor, UP Technical University, Lucknow, U.P. Sahay, B.S., Director, Institute of Management Technology, Ghaziabad, U.P. Shankar, Ravi, Associate Professor Department of Management, Indian Institute of Technology, Delhi

Contents: High Speed Computation • Transcendental and Polynomial Equations • System of Linear Algebraic Equations and Eigenvalue Problems • Interpolation and Approximation • Differentiation and Integration • Ordinary Differential Equations: Initial Value Problems • Ordinary Differential Equations: Boundary Value Problems. ISBN: 978-81-224-3323-4 Publication Year: 2012 Edition: 6th Pages: 736 Price: 395.00 Paperback

Contents: Introduction:TQM Basics and Beyond • TQM: Basic Concepts • TQM Practices in the Automobile Sector–A Survey • TQM Modeling of the Automobile Manufacturing Sector • Scenario Building and Policy Experimentation • TQM Implementation Strategies. ISBN: 978-81-224-2233-7 Publication Year: 2008 Edition: 1st Reprint: 2009 Pages: 404 Price : 295.00 Paperback

26 FUNDAMENTALS OF METAL FORMING PROCESSES

Multi Colour

EDITION 30 HEAT AND MASS TRANSFER DATA BOOK

Juneja, B.L., Former Professor, Deptt. of Mechanical Engg., IIT, Delhi, New Delhi

INT E

ISBN: 978-81-224-3123-0 Reprint: 2012 Pages: 200

Publication Year: 2010 Edition: 2nd Price: 280.00 Paperback

L NA

L NA

INT E

AT RN I O

EDITION

PUBLISHED

Kothandaraman, C.P., Former Head Deptt. of Mech. Engg., P.S.G. College of Tech. Coimbatore, Tamil Nadu Rudramoorthy, R., Principal, P.S.G. College of Technology, Coimbatore, Tamil Nadu

Kadambi Vedanth, Former PUBLISHED Professor and Head Indian Institute of Technology Kanpur, UP, India Prasad Manohar, Former Professor, Department of Mechanical Engineering Indian Institute of Technology, Kanpur, UP, India

Contents: Physical Properties of Fluids • Pressure Distribution in Fluids • Forces on Surfaces Immersed in Fluids • Buoyancy Forces and Stability of Floating Bodies • Fluid Flow—Basic Concepts—Hydrodynamics • Bernoulli Equation and Applications • Flow in Closed Conduits (Pipes) • Dimensional Analysis, Similitude and Model Testing • Flow of Compressible Fluids • Boundary Layer Theory and Flow Over Surfaces. ISBN: 978-81-224-3398-2 Publication Year: 2012 Edition: 3rd Pages: 896 Price: 399.00 Paperback

Contents: Principles of Turbomachinery • Energy Exchange in Turbomachines • Flow Through Nozzles and Blade Passages • Steam and Gas Turbines • Thermal Design of Gas Turbines • Rotary Fans, Blowers and Compressors • Hydraulic Turbines • Centrifugal and Axial-Flow Pumps • Characteristics of Hydraulic Turbomachines • Power Transmitting Turbomachines. ISBN: 978-81-224-3189-6 Reprint: 2012 Pages: 412

Publication Year: 2010 Edition: 7th Price: 140 Paperback

31 FLUID MECHANICS AND MACHINERY

27 AN INTRODUCTION TO ENERGY CONVERSION VOL. 3 AT RN I O TURBOMACHINERY EDITION

L NA

Kothandaraman, C.P., Former Head NATIO R Deptt. of Mech. Engg. P.S.G. College EDITION of Tech., Coimbatore, Tamil Nadu P U B L I S H E D Subramanyan, S., Former, Principal, P.S.G College of Technology and Vice Chancellor Bharathiar University, Coimbatore, Tamil Nadu Contents: Property Values • Conduction • Radiation • Convection • Heat Exchanger • Mass Transfer.

Contents: Plastic Deformation of Metals and Related Properties • Metal Forming Processes • Analysis of Stresses and Strains • Yield Conditions and Stress-Strain Relations • Theory of Slip Lines, Upper and Lower Bound Theorems • Forging Processes • Analysis of Strip Rolling Process • Longitudinal Rolling Technology and Equipment • Wire, Tube and Strip Drawing Processes • Extrusion Processes • Sheet Metal Forming Processes • Transverse Rolling Processes • Measurement of Friction in Metal Forming • Experimentation in Metal Forming. ISBN: 978-81-224-3089-9 Reprint: 2011 Pages: 424

NEW EDITIONS

INT E

TEXTBOOKS

Publication Year: 2011 Edition: 2nd Price: 299 Paperback

4

MECHANICAL E NGINEERING

TEXTBOOKS

32 FUNDAMENTALS OF HEAT AND MASS TRANSFER

36 PROCESS CONTROL Krishnaswamy, K., Vice-Principal, Kongu Engineering College, Perundurai, Erode Tamil Nadu

Kothandaraman, C.P., Former Head Deptt. of Mech. Engg. , P.S.G. College of Tech. Coimbatore, Tamil Nadu

Contents: Process Control Introduction • Control Characteristics and Tuning • Control Systems with Multiple Loops • Final Control Elements • Process Control Systems—Selected Unit Operations • Signal Conditioning • Digital Controllers —Computer-Based Control.

Contents: An Overview of Heat Transfer • Steady State Conduction • Conduction with Heat Generation • Heat Transfer with Extended Surfaces (FINS) • Two Dimensional Steady Heat Conduction • Transient Heat Conduction • Introduction to Convection • Convective Heat Transfer Practical Correlations—Flow Over Surfaces • Convective Heat Transfer Practical Correlations—Internal Flow • Natural Convection • Phase Change Processes—Boiling, Condensation, Freezing and Melting • Heat Exchangers • Thermal Radiation • Mass Transfer.

ISBN: 978-81-224-3364-7 Pages: 866 Price: 450.00

Publication Year: 2012 Paperback

ISBN: 978-81-224-2736-3 Reprint: 2012 Pages: 492

(With Skill Development, Caselets and Cases)

Multi Colour

Kumar, S. Anil, Professor, Deptt. of Commerce, N.M.K.R.V. College of Women Bangalore, Karnataka N. Suresh, Associate Professor & HOD of Industrial Engineering & Management, MVJ College of Engg., Bangalore, Karnataka

Kothandaraman, C.P., Former Head Deptt. of Mech. Engg., P.S.G. College of Tech., Coimbatore, Tamil Nadu Contents: TABLES: R12, Dichlorodifluoromethane, CCl2F2 • R22, Monochlorodifluoromethane, CHClF2 • R717, Ammonia, NH3 • R744, Carbon Dioxide, CO2 • R11, Trichlorofluoromethane, CCl3F • R134a, Tetrafluoroethane, CH2FCF3 • R123, Dichlorotrifluoroethane, CH2Cl2CF3 • R152a, Difluoroethane, CH3CHF2 • R143a, Trifluoroethane, CH3CF3 • R32, Difluoromethane, CH2F2 • R500, Azeotropic Mixture of R22 and R152a in the Ratio 73.8 : 26.2. ISBN: 978-81-224-3269-5 Publication Year: 2011 Edition: 3rd Pages: 80 Price: 75.00 Paperback

Contents: Introduction to Production and Operation Management • Plant Location and Layout • Material Handling • Materials Management • Production Planning and Control • Quality Control • Work Study (Time and Motion Study) • Maintenance Management • Waste Management • Automation. ISBN: 978-81-224-2177-4 Publication Year: 2008 Edition: 2nd Reprint: 2012 Pages: 284 Price: 175.00 Paperback

38 ORGANIZATIONAL EXCELLENCE THROUGH TOTAL QUALITY MANAGEMENT

Multi Colour

EDITION

Kothandaraman, C.P., Former Head Deptt. of Mech. Engg., P.S.G. College of Tech., Coimbatore, Tamil Nadu

A Practical Approach

Contents: TABLES: Properties of Saturated Steam—Pressure Base—mm of Mercury • Properties of Saturated Steam—Temperature Base • Properties of Saturated Steam—Pressure Base • Properties of Superheated Steam • Properties of Water—Steam at Supercritical Pressures • Transport Properties of Water and Steam at Saturation Conditions • Thermal Conductivity, k, of Steam and Water at Various Pressures and Temperatures • Dynamic Viscosity, µ, of Steam and Water at Various Pressures and Temperatures • Prandtl Number of Steam and Water at Various Pressures and Temperatures • Property Values of Water at Saturated State • Thermodynamics Properties of Gases at 15° C • Enthalpy of Formation and Heating Values of Fuels at 25° C, 1 atm. Unit Conversion Constants. CHARTS: Psychrometric Chart • Mollier Chart for Steam • Generalised Compressibility Chart. ISBN: 978-81-224-3268-8 Pages: 72 Price: 75.00

Publication Year: 2011 Paperback

Publication Year: 2009 Edition: 2nd Price: 299.00 Paperback

37 PRODUCTION AND OPERATIONS MANAGEMENT

Edition: 4th

33 REFRIGERANT EDITION TABLES AND CHARTS Including Air Conditioning Data

34 STEAM TABLES

NEW EDITIONS

Lal, H., Director General, Quality Forum, Federation of Indian Chambers of Commerce, FICCI Contents: Part-I: Product Quality and Its Control • Creating Quality by Design • Quality Control of the Purchased Product • Quality Control of Manufacturing Processes • Sales and Product Quality • Organising Effective Quality Management • Economics of Quality • The Human Factor in Quality • Management of Service Quality. Part-II: Concept and Philosophy • ISO-9000 Standards • The Customer-Focused Organization • Leadership and Team Building • Lean Production System • Total Productive Maintenance (TPM) • Customer Relationship Management (CRM) • Six-Sigma • Corporate Social Responsibility. ISBN: 978-81-224-2289-4 Publication Year: 2008 Edition: 1st Pages: 484 Price: 250.00 Paperback

Edition: 3rd

39 FUNDAMENTALS OF STATISTICAL MECHANICS

35 INDUSTRIAL INSTRUMENTATION

Laud, B.B., Former Professor and Head, Deptt. of Physics, Marathwada University, Aurangabad, Maharashtra

Krishnaswamy, K., Vice-Principal, Kongu Engineering College, Perundurai, Erode, Tamil Nadu Vijayachitra, S., Assistant Prof., Kongu Engineering College, Perundurai, Erode, Tamil Nadu

Contents: Introduction • Basic Concepts of the Theory of Probability • Maxwell Distribution • Macroscopic and Microscopic States • Statistical Ensembles • Some Applications of Statistical Mechanics • Formulation of Quantum Statistics • Bose-Einstein and Fermi-Dirac Distribution • Ideal Bose Systems • Ideal Fermi Systems • Phase Equilibria • Transport Phenomena • General Theory of Transport Phenomena. ISBN: 978-81-224-3278-7 Publication Year: 2012 Edition: 2nd Pages: 290 Price: 295.00 Paperback

Contents: Temperature • Pressure • Force, Torque and Velocity • Acceleration, Vibration and Density • Flow • Level • Viscosity, Humidity and Moisture • Fundamentals of Measuring Instruments. ISBN: 978-81-224-2750-9 Publication Year: 2010 Edition: 2nd Reprint: 2013 Pages: 560 Price: 350 Paperback

5

MECHANICAL E NGINEERING

44 OPTIMIZATION

TECHNIQUES

Maitra, Gitin M.,

EDITION

PUBLISHED

Mohan, C., Professor, Deptt. of Computer Science, Ambala College of Engg. & Applied Research, Saha, Ambala Cantt., Haryana Deep, Kusum, Associate Professor Department of Mathematics, Indian Institute of Technology, Roorkee, India

Contents: Fundamentals of Engineering Drawing • Geometrical Constructions • Methods of Projection and Views • Various Aspects of Engineering Drawing • Surface Development and Intersection • Structural, Piping and Other Drawings • Fits and Tolerances • Common Standards and Machine Elements • Common Transmission Elements and Accessories • Miscellaneous Topics.

ISBN: 978-81-224-2690-8 Reprint: 2010 Pages: 436

AT RN I O L NA

40 PRACTICAL ENGINEERING DRAWING

NEW EDITIONS INT E

TEXTBOOKS

Contents: Introduction • Classical Optimization Techniques • Linear Programming • Duality Theory and Post Optimality Analysis • Transportation Problem and Its Variants • Network Models • Sequencing and Scheduling Problems • Nonlinear programming: Kuhn-Tucker Theory • Special Classes of Nonlinear Optimization Problems • Solution of Unconstrained Nonlinear Optimization Problems • Solution of Constrained Nonlinear Optimization Problems • Integer Programming • Dynamic Programming • Decision Theory.

Publication Year: 2009 Edition: 1st Price: 250.00 Paperback

41 MODERN PROJECT MANAGEMENT

ISBN: 978-81-224-2385-3 Reprint: 2010 Pages: 626

Mishra, R.C., Director, Aryavart Institute of Technology and Management, Lucknow, U.P., India Soota, Tarun, Reader, Deptt. of Mechanical Engg., Bundelkhand Institute of Engg. & Technology, Jhansi, U.P., India

Publication Year: 2009 Edition: 1st Price: 350.00 Paperback

45 OPERATIONS RESEARCH Methods and Practice Mustafi, C.K., Indian Institute of Management, Calcutta, Kolkata, India

Contents: Project Management: An Overview • Concepts of Project Management • Project Appraisal and Selection • Projects: Scope and Formulation • Project Planning: A Systems Approach • Project Organisation • Project Direction, Co-ordination and Control • Contracts Management • Project Management Performance and Close Out • Network Techniques • Material Requirement Planning • Internet and E-commerce • Total Quality Management • Information Technology and Future of the Project Management. ISBN: 978-81-224-3071-4 Publication Year: 2011 Edition: 2nd Reprint: 2012 Pages: 266 Price: 195.00 Paperback

Contents: Introduction Linear Programming-I • Linear Programming-II • Network Analysis in Project Planning • Inventory Control • Waiting Line Problem • Simulation • Replacement • Reliability • Non-Linear Programming.

ISBN: 978-81-224-3342-5 Pages : 464 Price: 295.00

Publication Year: 2012 Paperback

Edition: 4th

46 PROJECT MANAGEMENT Project Appraisers • Project Managers • Entrepreneurs • Academics and Case Studies

42 PRINCIPLES OF OPERATIONS RESEARCH Mishra, R.C., Director, Aryavart Institute of Technology and Management, Lucknow, U.P., India Sandilya, Ankit, Associate Software Engineer, Accenture, Bangalore, India

Nagarajan, K., Regional Manager, Tamil Nadu Industrial Investment Corporation Limited, Coimbatore, Tamil Nadu Contents: Project: Characteristics and Types • Project Identification, Formulation and Implementation • Project Appraisal • Project Cost Estimation • Project Financing • Financial Appraisal-I (Financial Analysis of Projects) • Financial Appraisal-II (Financial Projections) • Project Planning and Scheduling • Project Cost Control • Rehabilitation of Sick Units • Project Organization • Project Contracts • Project Evaluation and Post Project Evaluation (Post Audit) • Computer Aided Project Management and Future of Project Management • Options in Projects • Risk Analysis.

Contents: Introduction to Operations Research • Mathematics for Operations Research • Linear Programming (Graphical Method) • Linear Programming (Simplex Method) • Transportation Models • Assignment Problem • Game Theory • Simulation • Dynamic Programming • CPM and PERT • Decision Theory • Inventory Models • Queueing Theory • Scheduling and Sequencing • Reliability • Replacement and Maintenance. ISBN: 978-81-224-3019-6 Reprint: 2012 Pages: 362

Publication Year: 2011 Edition: 1st Price: 250.00 Paperback

ISBN: 978-81-224-3324-1 Reprint: 2012 Pages: 686

43 RELIABILITY AND QUALITY MANAGEMENT

Publication Year: 2012 Edition: 6th Price: 395.00 Paperback

47 TOTAL QUALITY MANAGEMENT

Mishra, R.C., Director, Aryavart Institute of Technology and Management, Lucknow, U.P., India Sandilya, Ankit, Associate Software Engineer, Accenture, Bangalore, India

Nagarazan, R.S., Prof. & Director, Arunai Engineering College, Tiruvannamalai, Tamil Nadu Arivalagar, A.A., Prof. & Head of Deptt. of Mechanical Engg., Arunai Engineering College Tiruvannamalai, Tamil Nadu Contents: Introduction • TQM Principles • Statistical Process Control • TQM Tools • Quality Systems • Additional Topics • Additional Case Studies.

Contents: Principles of Reliability• Failure Statistics for Reliability • Maintainability Reliability • Probability and Distribution • Reliability Data Analysis • Reliability of System • Electronics System Reliability • Reliability Production Analysis. ISBN: 978-81-224-2688-5 Publication Year: 2009 Edition:1st Pages: 174 Price: 100.00 Paperback

ISBN: 978-81-224-2478-2 Reprint: 2012 Pages: 262

6

Publication Year: 2009 Edition: 2nd Price: 160.00 Paperback

MECHANICAL E NGINEERING

TEXTBOOKS

52 CAD/CAM/CIM

48 MACHINE DRAWING

Radhakrishnan, P., Director, P.S.G. Institute of Advanced Studies Avinashi Road, Coimbatore, Tamil Nadu Subramanyan, S., Former, Principal P.S.G. College of Technology and Vice Chancellor, Bharathiar University Coimbatore, Tamil Nadu Raju, V., Dean, School of Engg. Tech. Farmingdale State University New York, U.S.A

Narayana, K.L., Director (Research and Development), S.V.C.E.T. Chittoor, A.P. Kannaiah, P., Dean, (Academics) S.S.I.T.S. Rayachoti, A.P. Reddy K. Venketa, Professor, Department of Mechanical Engineering Yogananda College of Engineering, Tirupati, A.P. Contents: Introduction • Principles of Drawing • Orthographic Projections • Sectional Views • Screwed Fasteners • Keys, Cotters and Pin Joints • Shaft Couplings • Pipe Joints • Pulleys • Riveted Joints • Welded Joints • Bearings • Chains and Gears • Jigs and Fixtures • Limits, Tolerances, and Fits • Surface Roughness • Blueprint Reading • Assembly Drawings • Part Drawings • Production Drawings • Computer Aided Draughting. ISBN: 978-81-224-3396-8 Reprint: 2012 Pages: 476 THIRD EDITION

Contents: Computer Integrated Manufacturing • Product Development Through CIM • Principles of Computer Graphics • Computer Hardware • Operating Systems and Environments • Geometric Modeling Techniques • Finite Element Modeling and Analysis in CIM • CIM Database and Database Management Systems • Computer Aided Process Planning • Planning of Resources for Manufacturing Through Information Systems • Manufacturing Automation. ISBN: 978-81-224-2236-8 Publication Year: 2008 Edition: 3rd Reprint: 2012 Pages: 692 Price: 375.00 Paperback

Publication Year: 2012 Edition: 4th Price: 299.00 Paperback

53 STRENGTH OF MATERIALS

49 PRODUCTION DRAWING

Raghunath, H.M., Former Professor Deptt. of Civil Engg., M.I.T., Manipal Karnataka

Narayana, K.L., Director (Research and Development), S.V.C.E.T. Chittoor, A.P. Kannaiah, P., Dean, (Academics) S.S.I.T.S. Rayachoti, A.P. Reddy K. Venketa, Professor, Department of Mechanical Engineering Yogananda College of Engineering, Tirupati, A.P. Contents: Introduction • Principles of Dimensioning • Specification of Materials • Standard Mechanical Components-Specifications • Limits, Tolerances and Fits • Surface Roughness • Production Drawings and Process Sheets • Production Drawings of Mating Components • Production Drawing of Assemblies • Tool Drawings • Jigs and Fixtures • Inspection and Gauging Tool Drawings. • Conventional Representation. ISBN: 978-81-224-3501-6 Publication Year: 2013 Edition: 3rd Pages: 348 Price: 299.00 Paperback

Contents: Part A: Mechanical Testing of Metals and Timber: Mechanical Testing of Metals and Timber • Tension Test • Compression Test on Metals • Compression Test on Wood • Direct Shear Test • Static Bending Test on M.S. Beam • Static Bending Test on Timber Beam • Torsion Test • Brinell Hardness Test • Vickers Hardness Test • Rockwell Hardness Test • Utility of Hardness Test and Rebound Hardness • Impact Tests • Fatigue Test • Creep Test • Tests on Sheets, Strips and Pipes • Tests on Leaf Springs • Tests on Helical Springs. Part B: Experimental Stress Analysis: Nondestructive Testing • Strain Gauges and Rosettes • Photoelasticity. Part C: Strength of Materials—Theory and Problems: Simple Stresses and Strains • B.M. and S.F. Diagrams • Stresses in Beams • Torsion of Circular Shafts. ISBN: 978-81-224-2761-5 Publication Year: 2010 Edition: 1st Pages: 300 Price: 200.00 Paperback

50 REFRIGERATION AND AIRCONDITIONING

54 ENGINEERING MECHANICS Raghunath, H.M., Former Professor, Deptt. of Civil Engg., M.I.T., Manipal, Karnataka Contents: Part A: Statics: Resultant and Equivalent of Force Systems • Forces in Static Equilibrium • Trusses (Perfect Frames) • Centroids and Centres of Gravity • Area Moments of Inertia • Friction. Part B: Dynamics: Kinematics and Kinetics • Rotation and Translation • Motion of Connected Bodies • Superelevation • Projectile Motion • Work-Energy and Power • ImpulseMomentum • Spatial Force System.

DATA BOOK Prasad, Manohar, Former Professor Department of Mechanical Engineering Indian Institute of Technology, Kanpur, India Contents: SI Units • Refrigerants • Physical Properties • Psychrometric Properties • Infiltration Air • Ventilation • Design Conditions • Storage Conditions • Air Velocities and Losses in Ducts and Fittings • Evaporative Cooling System • Miscellaneous • Charts and Diagrams. ISBN: 978-81-224-3503-0 Publication Year: 2013 Edition: 2nd Pages: 214 Price: 150.00 Paperback

ISBN: 978-81-224-2759-2 Reprint: 2010 Pages: 188

Manufacturing Processes and Machine Tools Rao, K. Vara Prasada, Former Principal, Loyala Institute of Tech. & Mgmt., Sattenapalli, Andhra Pradesh

Radhakrishnan, P., Director, P.S.G. Institute of Advanced Studies Avinashi Road, Coimbatore, Tamil Nadu

Contents: Part A: Manufacturing Processes: • Foundry • Plastic Deformation Processes • Welding • Power Metallurgy • Plastics • Presses. Part B: Machine Tools: Fundamentals of Metal Cutting • Lathe • Capstan and Turret Lathes • Drilling Machines • Milling Machines • Shaper, Slotter and Planer • Grinding and Grinding Machines • Jigs and Fixtures • Broaching • Super Finishing Processes. ISBN: 978-81-224-2675-5 Publication Year: 2009 Edition: 2nd Reprint: 2010 Pages: 400 Price: 250.00 Paperback

Contents: Computer Aided Manufacture • CNC Systems • CNC Machine Tools • Constructional Features of CNC Machines • Process Definition for CNC Machining • Manual Part Programming and Programming of Lathes • Programming of Machining Centres • Programming of Grinding Machines • CNC Program Development Using CAM Software. Publication Year: 2012 Paperback

Publication Year: 2010 Edition: 1st Price: 150.00 Paperback

55 MANUFACTURING SCIENCE AND TECHNOLOGY

51 COMPUTER NUMERICAL CONTROL MACHINES AND COMPUTER AIDED MANUFACTURE

ISBN: 978-81-224-3397-5 Pages: 456 Price: 399.00

NEW EDITIONS

Edition: 1st

7

TEXTBOOKS

MECHANICAL E NGINEERING

60 PRINCIPLES OF ENGINEERING METALLURGY

56 NUMERICAL ANALYSIS Rao, Shanker G., Member of Staff Department of Mathematics, University College of Engg., Osmania University Hyderabad, A.P.

Reddy, L. Krishna, Former Professor Deptt. of Mech. Engg., KSRM College of Engg. Kadapa, Andhra Pradesh

Contents: Errors • Solutions of Algebraic and Transcendental Equations • Finite Differences • Interpolation with Equal Intervals • Interpolation with Unequal Intervals and Hermite Interpolation • Central Difference Interpolation Formulae • Inverse Interpolation • Numerical Differentiation • Numerical Integration • Numerical Solution of Ordinary Differential Equations • Solution of Linear Equations • Curve Fitting • Eigen Values and Eigen Vectors of a Matrix • Regression Analysis. ISBN: 978-81-224-2407-2 Reprint: 2010 Pages: 344

Contents: Introduction • Extraction of Non Ferrous Metals • Production of Iron and Steel • Crystal Structure • Solid Solutions • Phase Diagrams • Heat Treatment of Metals • Alloy Steels • Non-Ferrous Alloys • Plastic Deformation of Metals • Crystal Structure • Oxidation and Corrosion • Pyrometry • Strengthening Mechanics • Cast Irons • Composite Materials • Electron Theory of Metals • Magnetic Materials • Dielectric Materials. ISBN: 978-81-224-2202-3 Publication Year: 2008 Edition: 2nd Reprint: 2011 Pages: 322 Price: 195.00 Paperback

Publication Year: 2010 Edition: 4th Price: 195.00 Paperback

INT E

Theory and Practice

Rao, Singiresu S., Professor, School of Mechanical Engineering, Purdue University, West Lafayette, Indiana

Sachdeva, R.C., Director, HMR Institute of Technology & Management, Delhi Contents: Basic Concepts • Fundamental Equations of Conduction • One-Dimensional Steady State Heat Conduction • MultiDimensional Steady State Conduction • Transient Heat Conduction • Fundamentals of Convective Heat Transfer • Forced Convection Systems • Natural Convection • Thermal Radiation-Basic Relations • Radiative Heat Exchange Between Surfaces • Boiling and Condensation • Heat Exchangers • Diffusion Mass Transfer • Convective Mass Transfer • Experiments in Engineering Heat and Mass Transfer.

Contents: Introduction to Optimization • Classical Optimization Techniques • Linear Programming I: Simplex Method • Linear Programming II: Additional Topics and Extensions • Nonlinear Programming I: OneDimensional Minimization Methods • Nonlinear Programming II: Unconstrained Optimization Techniques • Nonlinear Programming III: Constrained Optimization Techniques • Geometric Programming • Dynamic Programming • Integer Programming • Stochastic Programming • Further Topics in Optimization • Practical Aspects of Optimization. ISBN: 978-81-224-2723-3 Publication Year: 2013 Edition: 3rd Pages: 776 Price: 450.00 Paperback

ISBN: 978-81-224-2785-1 Reprint: 2012 Pages: 698

Siddiqui, K.U., Professor, Deptt. of Mechanical Engineering, Integral University, Lucknow, U.P.

Ray, Siddhartha, Director-in-Charge National Instt. of Tech. Teachers’ Training and Research., Kolkata, W.B.

Contents: Automobile Engines • Fuel Supply and Ignition Systems • Engine Cooling Systems • Lubrication Systems • Transmission System • Electrical System • Principles of Design of Main Components of Power Unit • Body and Chassis • Suspension Springs and Shock Absorbers • Suspension Systems • Braking Systems • Front Axles and Steering System • Final Drive and Differential Gears • Wheels and Tyres • Air-Conditioning System • Maintenance and Service • Exhaust Emissions Control.

Contents: Introduction to Materials Handling • Principles of Materials Handling • Unit Load Concept • Classification of Materials Handling Equipment • Industrial Vehicles/Trucks • Conveyors • Pneumatic and Hydraulic Conveyors • Hoisting Equipment • Bulk Handling Equipment and Systems • Robotic Handling • Auxiliary Equipment • Organisation, Maintenance and Safety.

ISBN: 978-81-224-3072-1 Publication Year : 2011 Edition : 1st Reprint: 2013 Pages : 382 Price: 250.00 Paperback

Publication Year: 2008 Edition: 1st Price: 195.00 Paperback

63 MECHANICAL SYSTEM DESIGN

59 STRUCTURAL DESIGN IN STEEL

Siddiqui, K.U., Professor, Deptt. of Mechanical Engineering, Integral University, Lucknow, U.P. Singh, Manoj Kumar, Professor, Deptt. of Mechanical Engineering, Azad Instt. of Engg. and Tech., Lucknow, U.P. Prof. (Dr.) M.A. Faruqi, Advisor, Azad Educational Society, Lucknow, U.P.

Raz, Sarwar Alam, Former Senior Structural Design Engineer, EBASCO Services Inc., Brown and Root Inc., Stone and Webster Crop, ABB IMPELL Crop, U.S.A. Contents: Introduction • Structural Fasteners • Tension Members • Compression Members • Design of Beams • Riveted and Bolted Connections • Welded Connections • Special Connections and Bearings • Plate Girders • Multistorey Building Frames • Industrial Buildings • Plastic Analysis and Design • Water Tanks. Publication Year: 2012 Paperback

Publication Year: 2010 Edition: 4th Price: 395.00 Paperback

62 A TEXTBOOK OF AUTOMOBILE ENGINEERING

58 INTRODUCTION TO MATERIALS HANDLING

ISBN: 978-81-224-3228-2 Pages: 688 Price: 350.00

L NA

AT RN I O 61 FUNDAMENTALS OF ENGINEERING HEAT P UEDITION BLISHED AND MASS TRANSFER

57 ENGINEERING OPTIMIZATION

ISBN:978-81-224-2099-9 Reprint: 2010 Pages: 244

NEW EDITIONS

Contents: Introduction to Design of Systems • Engineering Processes and the System Approach • Design and Problem Formulation • System Theories • System Modelling • Linear Graph Analysis • Optimization Concepts • System Evaluation • Calculus Methods for Optimization • Decision Analysis • System Simulation • Application of Mechanical System Design to Control System • The Product Design Process.

Edition: 2nd

ISBN: 978-81-224-2683-0 Reprint: 2013 Pages: 392

8

Publication Year: 2010 Edition: 2nd Price: 200.00 Paperback

TEXTBOOKS

MECHANICAL E NGINEERING

64 UNCONVENTIONAL MANUFACTURING PROCESS

68 INTRODUCTION TO BASIC MANUFACTURING PROCESSES AND WORKSHOP TECHNOLOGY

Singh, M.K., Professor & HOD of Mechanical Engg., Hindustan College of Science & Technology, Farah Mathura U.P.

Singh, Rajender, Professor, Deptt. of Mechanical Engg, Deen Bandhu CR, University of Sc. & Tech., Murthal, Haryana Contents: Introduction • Plant and Shop Layout • Industrial Safety • Ferrous Materials • NonFerrous Materials • Melting Furnaces • Properties and Testing of Metals • Heat Treatment • Carpentry • Pattern and Core Making • Foundry Tools and Equipments • Mould and Core Making • Casting • Hot Working of Metals • Forging • Cold Working • Sheet Metal Work • Welding • Powder Metallurgy • Metal Cutting. ISBN: 978-81-224-3070-7 Publication Year: 2010 Edition: 2nd Reprint: 2010 Pages: 648 Price: 295.00 Paperback

Contents: Introduction of Unconventional Manufacturing Processes • Abrasive Jet Machining • Ultrasonic Machining (USM) • Ultrasonic Welding • Water Jet Machining • Chemical Machining • Electrochemical Machining (ECM) • Electrochemical Grinding • Electrical Discharge Machining (EDM) • Electron Beam Welding • Laser Beam Processing • Plasma Arc Cutting • Metallizing Process • High Energy Rate Forming • Supplementary Topics. ISBN: 978-81-224-2244-3 Publication Year: 2008 Edition: 1st Reprint: 2010 Pages: 222 Price: 200.00 Paperback

INT E

PRINCIPLES OF MANAGEMENT

Singh, Manoj Kumar, Lecturer, Deptt. of Mechanical Engineering, Azad Instt. of Engg. and Tech., Lucknow, U.P.

Srivastava, C.M., Emeritus Professor, Department of Physics and Retired Head of Materials Science Center and Advanced Center for Research in Electronics, IIT Bombay, Mumbai, India Srinivasan, C., Professor of Physics, Indian Institute of Technology, Bombay Mumbai, India

Contents: Unit-I: Industrial Economics. Unit-II: Basic Concept of Demand • Basic Concept of Supply. Unit-III: Money and Banking • Functions of Banking System. Unit-IV: Principles of Management • Contribution of Max Weber (April, 21, 1864-June 14, 1920). Unit-V: Human Behavior • Personality Development.

Contents: Part I : Science of Engineering Materials-Bulk Solid: Introduction • Bonding in Solids • Crystal Structure • Chemical Equilibria, Reaction Rates and Diffusion • Equilibrium Diagrams and Phase Transformation • Imperfections in Solids • Mechanical Properties • Thermal Properties • Electrochemical Reactions • Electronic Conduction in Solids • Superconductivity • Semiconductors • Magnetic Materials • Dielectric Materials • Wave Phenomena, Acoustic and Optical Properties of Solids • Polymers.

Publication Year: 2009 Edition: 1st Price: 75.00 Paperback

66 APPLIED THERMODYNAMICS

ISBN: 978-81-224-2727-1 Reprint: 2012 Pages: 540

Singh, Onkar, Professor, Deptt. of Mechanical Engg., Harcourt Butler Technological Inst., Kanpur, U.P. Contents: Fundamental Concepts and Definitions • Zeroth Law of Thermodynamics • First Law of Thermodynamics • Second Law of Thermodynamics • Entropy • Thermodynamic Properties of Pure Substance • Availability and General Thermodynamic Relations • Vapour Power Cycles • Gas Power Cycles • Fuel and Combustion • Boilers and Boiler Calculations • Steam Engine • Nozzles • Steam Turbines • Steam Condenser • Reciprocating and Rotary Compressor • Introduction to Internal Combustion Engines • Introduction to Refrigeration and Air Conditioning. ISBN: 978-81-224-2583-3 Publication Year: 2009 Edition: 3rd Reprint: 2012 Pages: 964 Price: 395.00 Paperback

Publication Year: 2010 Edition: 3rd Price: 299.00 Paperback

70 MECHANICS OF MATERIALS Swaroop, Adarsh, Prof. & Head, Dept. of Civil Engg., Sagar Instt. of Sci., Tech. & Res. (RGPV) Bhopal Contents: Stress and Strain—Axial Loading • Complex Stresses and Strains • Pressure Vessels • Theory of Simple Bending • Shearing Stress in Beams and Thin-Walled Members • Unsymmetrical Bending • Bending of Curved Beams • Torsion • State of Stress Caused by Combined Loading • Deflections • Columns • Rotating Discs and Cylinders • Elastic Theories of Failures • Continuous Beams. ISBN: 978-81-224-3225-1 Pages: 1616 Price: 495.00

67 INTRODUCTION TO MECHANICAL ENGINEERING Singh, Onkar, Professor, Deptt. of Mechanical Engg., Harcourt Bulter Technological Inst., Kanpur, U.P. Bhavikatti, S.S., Emeritus Fellow Ex-Professor and Dean, NITK Surathkal Karnataka, India Chandra, Suresh, Founder Director, Institute of Engg. & Tech. , Lucknow, U.P. Bharti, P.K. , Senior Lecturer, Integral University, Lucknow, U.P.

Publication Year: 2012 Paperback

Edition: 1st

71 A TEXTBOOK OF ENGINEERING GRAPHICS Venugopal, K., Former Prof. of Mech. Engineering, Government College of Technology, Coimbatore, Tamil Nadu Prabhu Raja, V., Associate Prof. of Mech. Engineering, PSG College of Technology Coimbatore, Tamil Nadu Contents: Drawing Instruments • BIS CodesLines, Lettering and Dimensioning • Geometrical Constructions • Engineering Scales • Curves Used in Engineering Practice-Conic Sections • Cycloids, Involutes, Spirals and Helices • Orthographic Projection • Projections of Points • Projections of Straight Lines • Projections on Auxiliary Planes • Projections of Plane Surfaces • Projections of Solids • Auxiliary Projections of Solids.

Contents: Part A: Thermodynamics: Fundamental Concepts and Definitions • Ideal and Real Gases • Zeroth Law of Thermodynamics • First Law of Thermodynamics • Second Law of Thermodynamics • Entropy • Thermodynamic Properties of Pure Substance • Thermodynamic Cycles and Introduction to I.C. Engines. Part B: Mechanics • Force System and Analysis • Friction • Analysis of Beams. ISBN: 978-81-224-2178-1 Reprint: 2009 Pages: 660

L NA

69 SCIENCE OF ENGINEERING AT RN I O MATERIALS AND EDITION CARBON NANOTUBES P U B L I S H E D

65 INDUSTRIAL ECONOMICS AND

ISBN: 978-81-224-2582-6 Reprint: 2011 Pages: 110

NEW EDITIONS

Publication Year: 2008 Edition: 5th Price: 295.00 Paperback

ISBN: 978-81-224-2457-7 Reprint: 2010 Pages: 594

9

Publication Year: 2008 Edition: 1st Price: 280.00 Paperback

MECHANICAL E NGINEERING

76 GAS TABLES

ISBN: 978-81-224-3149-0 Pages: 556 Price: 275.00

Publication Year: 2011 Paperback

EDITION

Contents: Gas Dynamic Properties of Some Gases and Vapours • Properties of Standard Atmosphere • Isentropic Flow of Perfect Gases • Normal Shocks in Perfect Gases • Oblique Shocks in Perfect Gases • Flow of Perfect Gases with Friction (Fanno Flow) • Isothermal Flow of Perfect Gases with Friction • Flow of Perfect Gases with Heat Transfer (Rayleigh Flow) • Prandtl-Meyer Functions and Mach Angles • Approximate Velocities and Mach Numbers of Air Corresponding to Dynamic Heads and Pressure Ratios • Manometer Inclinations Required for the Desired Magnification of the Deflection • Static Pressure Drop in Gas Pipe Lines. ISBN: 978-81-224-3270-1 Publication Year: 2011 Edition: 6th Reprint: 2012 Pages: 160 Price: 125.00 Paperback

Edition: 6th

REFERENCE BOOKS

Venugopal, K., Former Prof. of Mech. Engineering, Government College of Technology Coimbatore, Tamil Nadu Prabhu Raja, V., Associate Prof. of Mech. Engineering, P.S.G. College of Technology Coimbatore, Tamil Nadu Contents: Drawing Instruments • Lines, Lettering and Dimensioning. Plane Geometry: Geometrical Constructions • Engineering Scales • Conic Sections • Cycloids, Involutes, Spirals and Helices • Loci of Points. Solid Geometry: Orthographic Projection • Projections of Points • Projections of Straight Lines • Auxiliary Plane Projection Method • Projections of Plane Surfaces • Projections of Solids • Auxiliary Projections of Solids.

Adithan, M., Senior Professor, Deptt. of Mechanical Engg. and Director, Academic Staff College, VIT University, Vellore Tamil Nadu Contents: Global Manufacturing of Ultra-Class Equipment • The Future of Competitive Manufacturing • Manufacturing Industry: Directions for the Future • Future of Telecommunication and Electronic Equipment Manufacturing • Evolution of Technology in Electronics Industry and its Impact on Manufacturing Strategies. ISBN: 978-81-224-2674-8 Pages: 202 Price: 495.00

74 FINITE ELEMENT METHOD For Structural Engineers

Aglave, G.S., B.Sc. II, B.E. (Mech.), MMS Proficiency in Thermal Engg. (Govt. of India) Proficiency in Boilers (Govt. of Maharashtra) Proprietor, Conzerve Consultants Contents: Introduction to Boilers • Fuels • Combustion • Chemistry of Water • Various Equipments • Various Systems Provided • Boilers General • Various Types of Boilers • Power Boilers • Boiler Operation and Maintenance • Boiler Operational Problems • Mathematical Examples • Key Technical Data and Information • Important Tables • Important Graphs • Engineering Concepts. ISBN: 978-81-224-3424-8 Pages: 456 Price: 499.00

AT RN I O L NA

INT E

Edition: 1st

For Practicing Engineers and Students

Contents: Introduction to Finite Element Method • Basic Equations from Linear Elasticity Theory • Structural Idealization • Methods of Determining Stiffness Properties and its Transformation • Derivation of Stiffness Properties for One-Dimensional Elements • Derivation of Stiffness Properties for Two-Dimensional Elements • Formulation of Finite Element Method • Application of Finite Element Method. ISBN: 978-81-224-2410-2 Publication Year: 2008 Edition: 1st Reprint: 2010 Pages: 208 Price: 160.00 Paperback

COMPRESSIBLE FLOW P UEDITION BLISHED

with Aircraft and Rocket Propulsion

Yahya, S.M., Former Professor & Head, Deptt. of Mechanical Engg., I.I.T. Delhi, New Delhi Contents: Part I: Definitions and Basic Relations • The Energy Equation • Rate Equations for a Control Volume • Isentropic Flow with Variable Area • Wave Motion • Flow with Normal Shock Waves • Flow with Oblique Shock Waves • Flow in Constant Area Ducts with Friction • Flow in Constant Area Ducts with Heat Transfer. Part II: Multi-dimensional Flow • Methods of Measurement. Part III: Aircraft Propulsion • Rocket Propulsion • Miscellaneous Problems in Compressible Flow. Publication Year: 2012 Paperback

Publication Year: 2010 Hardbound

78 EXPOSURE TO BOILERS

Wail N. Al-Rifaie, Professor of Civil Engineering, University of Technology Baghdad, Iraq Govil, Ashok K., Prof., Deptt. of Applied Mechanics, Motilal Nehru Regional Engg. College, Allahabad, India

ISBN: 978-81-224-2668-7 Pages: 572 Price: 360

NEW EDITIONS

77 ADVANCES IN MANUFACTURING ENGINEERING AND TECHNOLOGY

Publication Year: 2011 Edition: 5th Price: 295.00 Paperback

75 FUNDAMENTALS OF

PUBLISHED

Yahya, S.M., Former Professor & Head Deptt. of Mechanical Engg., I.I.T., Delhi Multi Colour New Delhi

73 ENGINEERING DRAWING + AutoCAD

ISBN: 978-81-224-3145-2 Reprint: 2012 Pages: 618

EDITION

For Compressible Flow Calculations

Venugopal, K., Former Prof. of Mech. Engineering, Government College of Technology Coimbatore, Tamil Nadu Prabhu Raja, V., Associate Prof. of Mech. Engineering, P.S.G. College of Technology Coimbatore, Tamil Nadu Content: Drawing Instruments • Lines, Lettering and Dimensioning. Plane Geometry: Geometrical Constructions • Engineering Scales • Conic Sections • Cycloids, Involutes, Spirals and Helices • Loci of Points. Solid Geometry: Orthographic Projection • Projections of Points • Projections of Straight Lines • Auxiliary Plane Projection Method • Projections of Plane Surfaces • Projections of Solids • Auxiliary Projections of Solids • Sections of Solids • Development of Surfaces of Solids • Development of Surfaces of Solids with Cutouts • Intersection of Surfaces of Solids [Interpenetration of Solids].

AT RN I O L NA

72 ENGINEERING DRAWING

NEW EDITIONS INT E

TEXTBOOKS

Publication Year: 2012 Hardbound

Edition: 2nd

79 SELFING AND CROSSING CONCEPT Applied to the Strength of Blended Concrete Mixes Bairagi, Nisith K., Retired, Professor of Structural Engineering, IIT Bombay, Mumbai India Contents: Unit 1: Thermodynamics or Thermal Science: Any Concrete Viewed as a Blended Partially Set Concrete • Selfing and Crossing Concept • Selfing Equation, its Representation and Application • Analytical Solution of Selfing and Crossing Problems. ISBN: 978-81-224-2581-9 Publication Year: 2009 Edition: 1st Pages: 156 Price: 495.00 Hardbound

Edition: 4th

10

MECHANICAL E NGINEERING

INT E

PUBLISHED

Dukkipati Rao V., PhD, PE Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield, Connecticut, USA Contents: Introduction to Control Systems • MATLAB Basics • MATLAB Application to Control Systems • MATLAB Basics Tutorial • MATLAB Tutorial on Control Systems.

Bhavikatti, S.S., Emeritus Fellow Ex-Professor and Dean NITK Surathkal Karnataka, India

ISBN: 978-81-224-3230-5 Pages: 594 Price: 599.00

81 STRATEGIC COST ANALYSIS FOR PROJECT MANAGERS AT RN I O AND ENGINEERS

L NA

Creese, Robert C., Professor, P UEDITION BLISHED Deptt. of Industrial and Management Systems Engg.,West Virginia University, U.S.A Adithan, M., Senior Prof. Deptt. of Mech. Engg., and Director, Academic Staff College VIT University, Vellore, Tamil Nadu Contents: Cash Flows, Profits, Financial Statements and Interest • Expressions used in Engineering Economics • Gradient Expressions • Cash Flows, Depreciation, Taxes and Profits: (Basic Concept) • Cash Flows, Depreciation, Taxes and Profits: (Advanced Concepts) • Project Evaluation Techniques (Basic Techniques) • Project Evaluation Techniques (Based on Internal Rate of Return and Benefit-Cost Ratio) • Project Evaluation Technique (Based on Project Balance) • Evaluative Questions and Answers: Problems and Solutions (Chapterwise) • Appendix: Formula Sheets and Tables and Values for Engineering Economic Expressions. ISBN: 978-81-224-2837-7 Publication Year: 2010 Edition: 1st Pages: 148 Price: 395.00 Hardbound

Publication Year: 2011 Hardbound

85 PRODUCT AND PROCESS DESIGN FOR QUALITY, ECONOMY AND RELIABILITY Dukkipati Rao V., PhD, PE Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA Ray, Pradip K., Prof. & Head, Deptt. of Industrial Engg. & Mgmt., Indian Instt. of Tech. Kharagpur, India Contents: Introduction • Basic Probability and Statistics • Product and Process Design • Quality Principles in Design • Engineering Economic Analysis • Cost Evaluation • Design for Reliability • Quality by Experimental Design • Robust Design and Taguchi Method. ISBN: 978-81-224-2661-8 Pages: 888 Price: 895.00

Publication Year: 2010 Hardbound

Edition: 1st

86 MATLAB FOR MECHANICAL AT RN

IO

L NA

ENGINEERS

82 ANALYSIS AND DESIGN OF CONTROL SYSTEMS USING AT MATLAB RN I O

Edition: 1st

INT E

Contents: Introduction to Optimization • Mathematical Programming Methods • Classical Optimization Techniques • Linear Programming • One Dimensional Unconstrained Search Techniques • Unconstrained Multidimensional Optimization Techniques • Feasible Direction Method • Sequential Unconstrained Minimization Techniques • Sequential Linear Programming • Dynamic Programming • Introduction to Geometric Programming • Genetic Algorithm. ISBN: 978-81-224-2591-8 Publication Year: 2010 Edition: 1st Pages: 310 Price: 495.00 Hardbound

INT E

EDITION

For Control System Engineers

PUBLISHED

EDITION

Dukkipati Rao V., PhD, PE PUBLISHED Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA Contents: Introduction • MATLAB Basics • MATLAB Tutorial • Direct Numerical Integration Methods. ISBN: 978-81-224-2270-2 Publication Year: 2008 Edition: 1st Reprint: 2012 Pages: 624 Price: 495.00 Hardbound

L NA

INT E

AT RN I O L NA

AT RN I O

EDITION

EDITION Dukkipati Rao V., PhD, PE PUBLISHED Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA

Contents: Introduction • MATLAB Basics • MATLAB Tutorials • Solutions to Problems in MATLAB Basics • MATLAB Tutorial Solutions. ISBN: 978-81-224-2409-6 Publication Year: 2010 Edition: 2nd Reprint: 2011 Pages: 464 Price: 495.00 Hardbound

INT E

L NA

87 SOLVING ENGINEERING MECHANICS PROBLEMS AT RN I O WITH MATLAB EDITION

83 MATLAB

Dukkipati Rao V., PhD, PE PUBLISHED Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield, Connecticut, USA Srinivas, J., Prof. in the Deptt. of Mechanical Engg., Chaitanya Engg. College., Visakhapatnam, Andhra Pradesh

An Introduction with Applications AT RN I O

L NA

Dukkipati Rao V., PhD, PE EDITION Fellow of ASME & CSME, PUBLISHED Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA Contents: MATLAB Basics • Electrical Circuits • Control Systems • Numerical Methods • Optimization • Direct Numerical Integration Methods • Engineering Mechanics • Mechanical Vibrations. ISBN: 978-81-224-2698-4 Publication Year: 2010 Edition: 1st Pages: 682 Price: 695.00 Hardbound INT E

NEW EDITIONS

84 MATLAB

L NA

80 FUNDAMENTALS OF OPTIMUM DESIGN IN ENGINEERING

INT E

REFERENCE BOOKS

Contents: Engineering Mechanics • MATLAB Basics • MATLAB Tutorial for Mechanics • MATLAB for Engineering Applications • MATLAB-A Computational Tool for Mechanics. ISBN: 978-81-224-2601-4 Pages: 408 Price: 695.00

11

Publication Year: 2009 Hardbound

Edition: 1st

MECHANICAL ENGINEERING

92 HANDBOOK OF MECHANICAL ENGINEERING TERMS

88 HEAT AND MASS TRANSFER A Transport Phenomena Approach

Ramalingam, K.K., Retd. Prof. & Head, Deptt. of Automobile Engg., Madras Institute of Technology, Anna University, Chennai, Tamil Nadu

Gandhi, K.S., Department of Chemical Engineering, Indian Institute of Science Bangalore, Karnataka Contents: Introduction • Physical Laws and Open Systems • Fundamentals of Heat Transfer • Shell Balances in Heat Transfer • Conservation Equations for Single Component Systems • Advanced Topics in Heat Transfer • Fundamentals of Multicomponent Systems • Shell Balances in Pure Diffusion Problems • Conservation Equations for Multicomponent Systems • Advanced Topics in Mass Transfer • Transport Processes in Turbulent Flows • Computational Transport Processes.

ISBN: 978-81-224-2608-3 Reprint: 2009 Pages: 372

Edition: 1st

EDITION

Garde, R.J., Retd. Professor of P U B L I S H E D Hydraulic Engg., IIT, Roorkee,Uttarakhand Contents: Laminar Flow • Transition from Laminar to Turbulent Flow • Nature of Turbulence • Equations of Motion • Statistical Theory of Turbulence • Turbulence Models • Measurement of Turbulence • Description of Turbulent Flows-I: Wall Turbulent Shear Flows • Description of Turbulent Flows-II: Free Surface Flows • Description of Turbulent Flows-III: Free Turbulence Shear Flows. ISBN: 978-81-224-2662-5 Pages: 318 Price: 595.00

Publication Year: 2010 Hardbound

Ramakrishnan, P., Professor Emeritus I.I.T., Bombay Contents: New Products and Processes and the Global Growth of Powder Metallurgy • An Industry Overview on Sinter Hardening Solutions • Developments in PM Engine Components • PM Materials for Gear Applications • An Approach to Reduce Costs of Heat Treated Powder Metallurgy Parts • Development of Indigenous Sintered Metallic Value Guide for High Speed Automobiles • Development and Characterization of Iron Based Metal Matrix Composite for Brake Pads Applications.

Edition: 3rd

ISBN: 978-81-224-3031-8 Pages: 234 Price: 495.00

AT RN I O

INT E

L NA

90 NON-DESTRUCTIVE EDITION TESTING TECHNIQUES P U B L I S H E D

94 CONTROL SYSTEM TRENDSNATI IN TURBO-MACHINERY

R

O

Rangwala, A.S., Turbo-Machinery P U B L I S H E D Consultant and Ex-Adjunct Professor, Cincinnati State Technical College,USA Contents: Part l: Control System Basics: Automatic Control Theory in Turbo-Machines • Control Methods • Basics of Electricity and Electronics • Fluid Power Review. Part ll: Measurement and Regulation: Sensors for Measurement • Role of Valves • Manipulation and Actuation • Programmable Logic Controller • Controller Design and Analysis. Part lll: Turbo-Machinary Operation and Control: Turbo-Machinery Applications • Control Techniques for Aircraft Propulsion System • Controller Design for Marine Gas Turbines. ISBN: 978-81-224-2666-3 Publication Year: 2009 Edition: 1st Pages: 608 Price: 795.00 Hardbound

Publication Year: 2010 Edition: 1st Price: 325.00 Hardbound

91 ADVANCES IN ROTARY KILN SPONGE IRON PLANT

95 THEORY AND PRACTICE IN GAS TURBINES

AT RN I O L NA

Prasad, K.K., Former Dy. General Manager, R & D Center for Iron & Steel S.A.I. Ltd., Doranda, Ranchi Ray, Hem Shankar, Emeritus Scientist Central Glass and Ceramic Research Institute, Kolkata

EDITION

PUBLISHED

Rangwala, A.S., Turbo-Machinery Consultant and Ex-Adjunct, Professor Cincinnati State Technical College,USA Contents: Part I: Theoretical Considerations: Gas Turbine Historical Firsts • Thermal and Fluid Flow Dynamics • Physics Considerations • Cycles for Developing Shaft Power • Propulsion of Aircraft. Part II: Design and Operating Practice: Industrial and Power Generation Turbines • Aviation Engines • Aero-Derivative Engines for Marine, Industrial and Transport • Fan and Radial and Axial Compressors • Combustion Methods • Turbines • Gas Turbine Performance Evaluation • Performance Enhancement • Exhaust Gas Emission, Noise and Vibration Control.

Contents: Introduction • Rotary Kiln Process of Making Sponge Iron • Thermodynamic Considerations: Feasibility of Reaction • Aerodynamics inside a Sponge Iron Rotary Kiln • Mathematical Modelling in Rotary Kiln Sponge Iron Making • Physical Movement of Solids inside a Rotary Kiln: Charge Movement and Coal Throwing/Slinging • Requirement, Generation and Transfer of Heat in a Sponge Iron Rotary Kiln • Reaction Kinetics • Raw Materials for Sponge Iron Making • Accretion or Ring Formation inside a Rotary Kiln • Sponge Iron Properties: Re-oxidation and Auto-Ignition of Sponge Iron • Uses of Sponge Iron. Publication Year: 2009 Hardbound

Edition: 1st

EDITION

Contents: Introduction • Ultrasonic Testing • Eddy-current Testing • Magnetic Particle Flaw Detection • Liquid Penetrant Inspection • X-Radiography • Acoustic Emission Testing and Acousto-Ultrasonic Testing • Miscellaneous NDT Methods.

ISBN: 978-81-224-2401-0 Pages: 188 Price: 495.00

Publication Year: 2012 Hardbound

L NA

Prakash, Ravi, Dean, Research and Consultancy Division, Birla Instt. of Tech. and Sc., Pilani, Rajasthan, India

ISBN: 978-81-224-2588-8 Reprint: 2012 Pages: 146

Publication Year: 2009 Edition: 2nd Price: 695.00 Hardbound

93 POWDER METALLURGY FOR AUTOMOTIVE AND HIGH PERFORMANCE MATERIALS IN ENGINEERING INDUSTRIES

AT RN I O L NA

89 TURBULENT FLOW

Contents: General • Materials • Material Properties • Processes • Machines and Devices • Machine Components and Attachments • Tools and Cutters • Instruments and Gauges • Casting • Welding • Heat and Surface Treatments • Mechanics of Machines • Material Handling • Friction, Lubrication and Bearings • Thermodynamics and Heat Transfer.

INT E

Publication Year: 2011 Hardbound

INT E

ISBN: 978-81-224-3277-0 Pages: 466 Price: 495.00

NEW EDITIONS

INT E

REFERENCE BOOKS

ISBN: 978-81-224-2809-4 Pages: 554 Price: 595.00

Edition: 1st

12

Publication Year: 2010 Hardbound

Edition: 1st

REFERENCE BOOKS

NEW EDITIONS

TEXTBOOKS

100 MANUFACTURING TECHNOLOGY

L NA

INT E

96 STRUCTURAL DYNAMICS OF TURBO-MACHINES RNATIO

EDITION Rangwala, A.S., Turbo-Machinery PUBLISHED Consultant and Ex-Adjunct Professor, Cincinnati State Technical College,USA Contents: Vibration Theory Fundamentals • Fan and Compressor Airfoils • Turbine and Combustor Parts • Bearing and Seal Characteristics • Shaft Torsional Vibration • Flexural Rotor Dynamics • Experimental and Test Measurement • Balancing of Rotors • Turbo-Machinery Noise.

ISBN: 978-81-224-2230-6 Pages: 450 Price: 650.00

Publication Year: 2009 Hardbound

Adithan, M., Senior Professor, Deptt of Mechanical Engg., and Director, Academic Staff College, VIT University, Vellore Tamil Nadu Gupta, A.B., Assistant Professor, Technical Teachers' Training Institute, Chandigarh Contents: Welding Techniques • Measuring Devices (Metrology) • Surface Roughness and its Measurement • Boring • Broaching • Grinding • Jigs and Fixtures • Microfinishing Processes • Surface Preparation and Coating Techniques • Modern Machining Methods, Presses and Press Working • Metal Forming Processes • Modern Forming Techniques • Numerical Control of Machine Tools • Advanced Manufacturing Technologies. ISBN: 978-81-224-0817-1 Publication Year: 1996 Edition: 1st Reprint: 2012 Pages: 384 Price: 295.00 Paperback

Edition: 1st

97 HANDBOOK OF PIPING DESIGN

101 PRACTICAL REFRIGERATION AND AIR-CONDITIONING

Sahu, G.K., Former AGM, Deptt. of Design and Project Engg., Rourkela Steel Plant, Rourkela, Orissa

Adithan, M., Senior Professor, Deptt of Mechanical Engg., and Director, Academic Staff College, VIT University, Vellore Tamil Nadu Laroiya, S.C., Professor of Mechanical Engineering, National Institute for Technical Teachers' Training and Research Chandigarh

Contents: Fundamentals of Fluid Mechanics • Hydraulic Design Considerations • Metallurgy of Piping Materials • Pipes and Pipe Fittings • Pipe Supports • Valves and Allied Fittings • Piping Fabrication • Expansion Effects and Compensating Methods • Flexibility Analysis of Piping Systems • Thermal Insulation • Design of Tubular Components of Water Tube Boilers • Water Supply Piping • Corrosion-erosion in Pipelines • CPVC Piping (An Anti-corrosive Piping System) • Pipework Maintenance. ISBN: 978-81-224-2456-0 Reprint: 2011 Pages: 492

Contents: Brief Introduction about the Book • Basic Concepts for Learning Refrigeration Systems • Basic Mechanical Refrigeration System • Practical Tasks in Refrigeration and Air Conditioning • Refrigeration Trainer for Knowledge and Skill Development in Refrigeration and Air Conditioning.

Publication Year: 2009 Edition: 2nd Price : 970.00 Hardbound

ISBN: 978-81-224-0309-1 Reprint: 2011 Pages: 168

98 ROTODYNAMIC PUMPS Srinivasan, K.M., Dean (R&D), Mechanical Sciences, Deptt. of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, Tamil Nadu

Agrawal, Shyam K., Former Professor Deptt. of Mechanical Engg. Bhagalpur Engineering College Bhagalpur, Bihar

Contents: Introduction • Pump Parameters • Theory of Rotodynamic Pumps • Theory and Calculation of Blade Systems in Centrifugal Pump • Spiral Casings (Volute Casings) • Losses in Pumps • Axial and Radial Thrusts • Model Analysis • Cavitation in Pumps • Axial Flow Pump • Testing, Performance Evaluation and Regulation of Pumps • Pump Construction and Application • Design of Pump Components. ISBN: 978-81-224-2278-8 Publication Year: 2008 Edition: 1st Pages: 536 Price: 695.00 Hardbound

Contents: Introduction • Air Standard Cycles • Thermochemistry • Working Cycles • Combustion in SI Engines • Combustion in CI Engines • Fuels • Carburetor and Fuel Injection • Two Stroke Engines • Engine Cooling and Lubrication • Ignition Systems • Compressors and Supercharging • Engine Testing • Gas Turbines • Jet Propulsion • Alternate Potential Engines. ISBN: 978-81-224-1782-1 Publication Year: 2006 Edition: 2nd Reprint: 2010 Pages: 548 Price: 245.00 Paperback

103 LABORATORY WORK IN HYDRAULIC ENGINEERING

99 PRINCIPLES OF FOUNDRY PROCESS DESIGN

Asawa, G.L., Professor, Department of Civil Engg., Indian Institute of Tech., Roorkee, Uttarakhand, India

Sutradhar, Goutam, Professor, Department of Mechanical Engineering and Joint Director School of Automotive Engineering, Jadavpur University, Kolkata, W.B. Contents: Contents: Introduction • Solidification of Castings • Gating and Risering • Metal Filtration • Design Considerations of Castings • Conventional Method of Calculation of Gating and Feeding System • Computer Application in Foundry • Computer Aided Methoding of Castings • Casting Solidification Simulation • Use of Knowledge based Expert System for Methoding of Castings • Fuzzy Inference Expert System for Optimum Process Selection. Publication Year: 2012 Hardbound

Publication Year: 1991 Edition: 1st Price: 100.00 Paperback

102 INTERNAL COMBUSTION ENGINES

(Centrifugal and Axial)

ISBN: 978-81-224-3405-7 Pages: 150 Price: 399.00

BACK LIST

Contents: Elementary Terms of Fluid Mechanics • Fundamental Equations governing Fluid Motion • Open Channel Flow • Basic Facilities in Hydraulic Engineering Laboratory • Writing Laboratory Reports • Viscometer • Surface Tension • Centre of Pressure • Metacentric Height • Bernoulli's Equation • Impact of a Fluid Jet • Horizontal Water Jet through an Orifice • Orifice Meter • Venturi Meter • Triangular Weir or V-notch • Viscous Flow Analogy • Electrical Analogy • Effect of Vorticity • Forced Vortex Flow • Flow through Porous Medium • Stokes' Law • Transition from Laminar to Turbulent Flow • Velocity Distribution in Pipes. ISBN: 978-81-224-1810-1 Publication Year: 2006 Edition: 1st Reprint: 2011 Pages: 202 Price: 100.00 Paperback

Edition: 1st

13

MECHANICAL ENGINEERING

TEXTBOOKS

104 ELECTRO-MECHANICAL ENERGY CONVERSION WITH DYNAMICS OF MACHINES

108 NONCONVENTIONAL ENERGY Desai, A.V., Consultant Editor, ABP (P) Ltd. New Delhi

Begamudre, R.D., Ex-Professor Department of Electrical Engineering Indian Institute of Technology, Kanpur India

Contents: Introduction • Market Potential of Renewable Energy Technology • Solar and Wind Energy Technology • Geothermal Energy Exploration and Utilization • Photovoltaic Technology: Applications in Developing Countries • Use of Wind to Generate Electricity in

Contents: Electric and Magnetic Field Calculations • Electromechnical Energy Conversion • Induced Voltage, Armature Reaction and Torque • Tower Transformers and Reactors • Direct Current Machines • AC Induction Machines • Synchronous Machines • Dynamics of Electric Machines • Control of Machines with Solid-State Devices • Principles of Computer-Aided Design of Electrical Machines. ISBN: 978-81-224-1167-6 Reprint: 2010 Pages: 620

Developing Countries. ISBN: 978-81-224-0207-0 Reprint: 2011 Pages: 212

Publication Year: 1998 Edition: 2nd Price: 295.00 Paperback

Gerling, Heinrich, Director of Trade, Schwerte (Ruhr)

An Introductory Textbook

Contents: Turning operations • Drilling and Boring Operations • Manufacture of Tapered Parts • Milling Operations • Shaping and Planing Operations • Manufacture of Parts on the Slotting Machine • Broaching Operations • Grinding Operations • Threading Operations • Manufacture of Gears.

Bhat, B.R., Professor of Statistics University of Botswana, Gaborone Contents: Introduction • Sets and Classes of Events • Random Variables • Probability Space • Distribution Functions • Expectation and Moments • Convergence of Random Variables • Characteristic Functions • Convergence of Distribution Functions • Independence • Laws of Large Numbers • Central Limit Theorem • Conditioning • Finite Markov Chain.

ISBN: 978-81-224-1826-2 Reprint: 2012 Pages: 252

Publication Year: 1999 Edition: 3rd Price: 200.00 Paperback

Ghosh, A., Professor, Department of Metallurgical Engg., IIT, Kanpur, U.P. Ray, H. S., Professor, Department of Metallurgical Engineering, IIT Kharagpur, W.B.

Bhavikatti, S.S., Emeritus Fellow Ex-Professor and Dean NITK Surathkal, Karnataka, India Hegde, A. Vittal, Professor of Marine Structure and Head, Department of Applied Mechanics and Hydraulics, N.I.T.K., Surathkal, Mangalore, Karnataka

Contents: Part A: Introductory: Introduction • Methods of Extraction and Refining of Metals. Part B: Principles of Pyrometallurgy: Material and Heat Balance of Processes • Thermodynamics of Metallurgical Reactions • Fluid Flow • Heat Transfer • Rates of Metallurgical Reactions • Structure and Properties of High Temperature Melts in Metallurgy • Analysis of Unit Processes. Part C: Principles of Electro- and Hydrometallurgy: Principles of Electrometallurgy • Hydrometallurgy.

Contents: Coplanar Concurrent Force Systems • Coplanar Non-concurrent Force Systems • Analysis of Pin-jointed Plane Frames • Friction • Centroid of Areas • Area Moment of Inertia • Introduction to Dynamics and Linear Motion • Projectiles • D’Alembert’s Principle • Work Energy Principle • Impulse Momentum Principle • Impact of Elastic Bodies • Circular Motion of Rigid Bodies • Virtual Work • Introduction to Vector Approach.

ISBN: 978-81-224-0322-0 Reprint: 2010 Pages: 324

Publication Year: 2005 Edition: 2nd Price: 150.00 Paperback

Publication Year: 1991 Edition: 2nd Price: 195.00 Paperback

111 FUNDAMENTALS OF ELECTRIC MACHINES

107 PRINCIPLES OF PLASMA MECHANICS

Gupta, B.R., Retd. Professor, Deptt. of Electrical Engineering, Punjab Engineering College, Chandigarh Singhal, Vandana, Deputy Director Central Electricity Authority, Deptt. of Power, Govt. of India, New Delhi

Chakraborty, Bishwanath, Former Professor, Department of Mathematics, Jadavpur University, Kolkata, West Bengal Contents: Basic Electricity and Magnetism • Dynamics of Charged Particles • Basic Plasma Properties • Magnetohydrodynamics • Applications of MHD and Plasma Processes • Collision Processes in Plasmas • Ionospheric Effects • Kinetic Theory • Distribution Functions in Six Dimensional Phase Space • Plasma Kinetic Theory • Small Amplitude Waves in Plasmas • Nonlinear Effects of Waves in Plasma • Laser Plasma Interactions. ISBN: 978-81-224-1446-2 Reprint: 2008 Pages: 504

Publication Year: 2006 Edition: 2nd Price: 199.00 Paperback

110 PRINCIPLES OF EXTRACTIVE METALLURGY

106 PROBLEMS AND SOLUTIONS IN ENGINEERING MECHANICS

ISBN: 978-81-224-1601-5 Reprint: 2012 Pages: 208

Publication Year: 1990 Edition: 1st Price: 185.00 Paperback

109 ALL ABOUT MACHINE TOOLS

105 MODERN PROBABILITY THEORY

ISBN: 978-81-224-1189-8 Reprint: 2011 Pages: 344

BACK LIST

Contents: Basic Principles • Transformers • DC Machines • AC Machines Fundamentals • Synchronous Generators • Synchronous Motors • Polyphase Induction Motors • Single-Phase Induction Motor • AC Commutator Motors • Special Machines • Solid State Motor Control.

Publication Year: 2003 Edition: 4th Price: 275.00 Paperback

ISBN: 978-81-224-1614-5 Reprint: 2011 Pages: 644

14

Publication Year: 2005 Edition: 3rd Price: 280.00 Paperback

MECHANICAL ENGINEERING

TEXTBOOKS

112 COMPREHENSIVE VOLUME AND CAPACITY MEASUREMENTS

116 WESTERMANN TABLES For the Metal Trade

Contents: Units and Primary Standard of Volume • Standards of Volume/Capacity • Gravimetric Method • Volumetric Method • Volumetric Glassware • Calibration of Glassware • Effect of Surface Tension on Meniscus Volume • Storage Tanks • Calibration of Vertical Storage Tank • Horizontal Storage Tanks • Calibration of Spheres, Spheroids and Casks • Large Capacity Measures • Vehicle Tanks and Rail Tankers • Barges and Ship Tanks. Publication Year: 2006 Paperback

ISBN: 978-81-224-1730-2 Reprint: 2012 Pages: 160

117 AN INTRODUCTION TO ENERGY CONVERSION

Edition: 1st

Vol. I Basic Thermodynamics Kadambi Vedanth, Former Professor and Head, Indian Institute of Technology Kanpur, UP, India Prasad Manohar, Former Professor Department of Mechanical Engineering Indian Institute of Technology Kanpur, UP India

Gupta, Vijay, Director, GD Goenka World Institute, Sohna, Haryana Contents: Transfer Processes • Conduction: Heat Transfer in Stationary Medium • Examples in Conduction • Numerical Solution of Conduction Problems • Convection: Heat Transfer in Fluids • Examples in Heat Convection • Mass Transfer • Convective Mass Transfer • Radiative Transfer • Heat and Mass Exchangers. ISBN: 978-81-224-0800-3 Publication Year: 1995 Edition: 1st Reprint: 2012 Pages: 474 Price: 275.00 Paperback

Contents: Introduction • First Law, State Postulate and Applications • Properties of Pure Substances • Second Law of Thermodynamics: Entropy • Applications of Second Law: Thermodynamic Relations • Availability and Irreversibility • Thermodynamic Cycles • Statistical Principles and Entropy • Kinetic Theory and Statistics. ISBN: 978-0-85226-451-5 Publication Year: 1976 Edition: 1st Reprint: 2010 Pages: 250 Price: 160 .00 Paperback

114 NUMERICAL METHODS

PROBLEMS and SOLUTIONS

118 AN INTRODUCTION TO ENERGY CONVERSION

Jain, M.K., Professor, Deptt. of Mathematics and Head Computer Services Centre, IIT, Delhi Iyengar, S.R.K., Dean (Academic Affairs) and Professor, Department of Mathematics Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad Jain, R.K., Professor, Department of Mathematics, Indian Institute of Technology, Delhi, India

VOL. II Energy Conversion Cycles Kadambi Vedanth, Former Professor and Head, Indian Institute of Technology Kanpur, UP, India Prasad Manohar, Former Professor Department of Mechanical Engineering Indian Institute of Technology Kanpur, UP India Contents: Sources of Energy • Principles of Thermal Energy Release • Principles of Thermal Energy to Work Conversion Devices • The Internal Combustion Engine • Phase Change Cycles • Reciprocating Compressors • Refrigeration.

Contents:Transcendental and Polynomial Equations • Linear Algebraic Equations and Eigenvalue Problems • Interpolation and Approximation • Differentiation and Integration • Numerical Solution of Ordinary Differential Equations. Publication Year: 2004 Edition: 1st Price: 200.00 Paperback

115 FUNDAMENTALS OF METAL CUTTING AND MACHINE TOOLS

ISBN: 978-0-85226-452-2 Reprint: 2010 Pages: 320

Publication Year: 1974 Edition: 1st Price: 160.00 Paperback

119 MATRIX METHODS OF STRUCTURAL ANALYSIS

Juneja, B.L., Former Professor Department of Mechanical Engg. IIT, Delhi, New Delhi Sekhon, G.S., Professor, Department of Applied Mechanics, Indian Institute of Technology, Delhi Seth, Nitin, Professor, Department of Mechanical Engineering Institute of Engineering and Technology, Indore, India

Kanchi, M.B., TRW, Space and Technology Group, Ballistic Missiles Division, California, USA, Formerly, Professor of Civil Engineering, University of Roorkee, Roorkee, U.P., India Contents: Introduction • Equilibrium • Kinematics • Virtual Work • Element Flexibility • Force Method • Element Stiffness • Displacement Method I-Frames • Displacement Method IIFinite Elements • Displacement Method III • Analysis for Dynamic Loads • Geometrically Nonlinear Problems • Nonlinear Material Problems • Computational Aspects. ISBN: 978-81-224-0429-6 Publication Year: 1993 Edition: 2nd Reprint: 2011 Pages: 576 Price: 295.00 Paperback

Contents: Machining Processes and Machine Tools • Materials and Geometry of Cutting Tools • Mechanics of Machining Processes • Thermal Aspects and Cutting Fluids • Tool Wear, Tool Life and Machinability • Machining with Controlled Contact Tools • Abrasive Machining Processes • Non-Conventional Machining Processes • Surface Finish and Surface Integrity. ISBN: 978-81-224-1467-7 Reprint: 2012 Pages: 628

EDITION

Publication Year: 2006 Edition: 3rd Price: 125.00 Paperback

113 ELEMENTS OF HEAT AND MASS TRANSFER

ISBN: 978-81-224-1534-6 Reprint: 2013 Pages: 430

Multi Colour

Jütz, Hermann Scharkus, Eduard Contents: Materials • Numbers • Mechanics • Engineering Components • Metal Cutting Operations • Engineering Drawings • Measures and Weights.

Gupta, S.V., Former Scientist, N.P.L. New Delhi

ISBN: 978-81-224-1819-4 Pages: 418 Price: 195.00

BACK LIST

Publication Year: 2003 Edition: 2nd Price: 299.00 Paperback

15

MECHANICAL ENGINEERING

TEXTBOOKS

120 FLUID MECHANICS

124 TOTAL QUALITY MANAGEMENT

Kapoor, Baljeet S., Prof., Department of Civil Engineering and Head PG Env. Engineering P.E.C., Chandigarh Contents: Fluid Properties • Fluid Statics • Kinematics of Fluid Flow • Fluid Dynamics • Dimensional Considerations • Flow Through Pipes and Reservoir Problems (one and two) • Three Reservoir Problem, Transmission Through Pipe Lines, Siphons and Nozzles • Flow Measurement • Basic Equations • Laminar Flow • Boundary Layer Analysis • Turbulent Flow. ISBN: 978-81-224-1163-8 Reprint: 2010 Pages: 660

Publication Year: 1998 Edition:2nd Price: 275.00 Paperback

121 WELDING SCIENCE AND TECHNOLOGY

A Practical Approach Lal, H., Director General Quality Assurance Ministry of Defence, New Delhi, India Contents: Management of Product Quality • Creating Quality by Design • Quality Control of the Purchased Product • Quality Control of Manufacturing Processes • Sales and Product Quality • Organising for Effective Quality Management • Economics of Quality • The Human Factor in Quality Management • Frequency Distribution • Normal Distribution • Theory of Probability • Control Charts • Control Chart of Attributes • Theory of Sampling Inspection • Standard Sampling Tables. ISBN: 978-81-224-0242-1 Reprint: 2011 Pages: 252

Khan, Md. Ibrahim, Professor and Head, Deptt. of Mechanical Engineering, Integral University, Lucknow, U.P.

Publication Year: 1990 Edition: 1st Price: 195.00 Paperback

125 HYDRAULICS LABORATORY MANUAL

Contents: Introduction to Welding Technology • Review of Conventional Welding Processes • Welding Science • Shielded Metal ARC (SMA) Welding • Thermal and Metallurgical Consideration in Welding • Analytical and Mathematical Analysis • Welding of Material • Welding Procedure and Process Planning • Weld Quality • Testing and Inspection of Welds • Welding of Pipelines and Piping • Life Prediction of Welded Structures • Welding of Plastics • Welding Under the Influence of External Magnetic Field • Fundamentals of Underwaters Welding— Art and Science. ISBN: 978-81-224-2073-9 Reprint:2009 Pages: 288

Likhi, S.K., Assistant Professor, Civil Engineering, Technical Teachers' Training Institute, Chandigarh Contents: Measurement Techniques • Floating Bodies • Fundamentals of Fluid Flow • Orifice and Mouthpiece • Flow Through Pipes • Flow Measurements • Hydraulic Machines.

ISBN: 978-81-224-0516-3 Reprint: 2012 Pages: 104

Publication Year: 2007 Edition: 1st Price: 195.00 Paperback

Publication Year: 1995 Edition: 1st Price: 100.00 Paperback

126 HYDRAULIC DATA BOOK FOR ENGINEERS

122 INDUSTRIAL ENGINEERING Khan, M.I., Prof. & Head, Deptt. of Mechanical Engg., Integral University Lucknow, U.P

Likhi, S.K., Assistant Professor, Civil Engineering, Technical Teachers' Training Institute, Chandigarh Sharma, S.K., Lecturer in Civil Engineering Technical Teachers' Training Institute, Chandigarh

Contents: Introduction • Productivity • Work Study: Definition, Purpose and Scope • Method Study • Work Measurement • Job Evaluation and Merit Rating • Plant Layout and Materials Handling • Production Planning and Control • Depreciation and Replacement Analysis • Inventory Control • Material Requirement Planning (MRP) • Quality Assurance, Total Quality Management (TQM) and Just-in-Time (JIT) • Business Organisation and Forms of Ownership • Manpower (Human Resource) Planning and Factory Legislation (India) • Sales Management, Forecasting, Accounting and Budgetary Control • Project Management Through PERT/CPM • Break-even Analysis • Operations Research • Engineering Economy. ISBN: 978-81-224-2059-3 Reprint: 2012 Pages: 340

BACK LIST

Contents: Physical Properties of Fluids • Pressure and Its Measurements • Hydrostatic Pressure • Floating Bodies • Fundamentals of Fluid Flow • Flow Through Orifices • Flow Through Pipes • Flow Through Open Channels • Flow Measurements • Hydraulic Machines. ISBN: 978-81-224-0514-9 Reprint: 2009 Pages: 220

Publication Year: 2007 Edition: 2nd Price: 199.00 Paperback

Publication Year:1998 Edition: 1st Price: 120.00 Paperback

127 TEXTBOOK IN APPLIED MECHANICS

123 INTRODUCTION TO MACHINING SCIENCE

Malhotra, M.M., Technical Teachers' Training Institute, Chandigarh Subramanian, R., Technical Teachers' Training Institute, Chandigarh Gahlot, P.S., Technical Teachers' Training Institute, Chandigarh Rathore, B.S., Technical Teachers' Training Institute, Chandigarh

Lal, G.K., Deptt. of Mechanical Engg. Indian Institute of Technology, Kanpur U.P. Contents: Deformation of Metals • Machining Processes • Tool Geometry • Mechanics of Metal Cutting • Mechanics of Oblique Cutting • Measurement of Cutting Forces • Thermal Aspects of Machining • Tool Wear and Tool-life • Economics of Machining • Practical Machining Operations • Grinding of Metals • Vibrations in Machining. ISBN: 978-81-224-2104-0 Publication Year: 2007 Edition: 3rd Reprint: 2009 Pages: 232 Price: 195.00 Paperback

Contents: Introduction • Force • Equilibrium • Centre of Gravity • Friction • Kinematics • Kinetics • Work, Energy and Power • Machines. ISBN: 978-81-224-0645-0 Reprint: 2009 Pages: 582

16

Publication Year: 1994 Edition: 1st Price: 200.00 Paperback

MECHANICAL ENGINEERING

TEXTBOOKS

128 RELIABILITY AND MAINTENANCE ENGINEERING

132 TOTAL QUALITY

MANAGEMENT Naidu, N.V.R., Professor, Deptt. of Industrial Engg. and Management, M.S. Ramiah Institute of Technology Bangalore Karnataka Babu, K.M., Vice-Principal and Professor & Head, Deptt. of Industrial Engg. and Mgmt., B.M.S. College of Engg. Bangalore, Karnataka Rajendra, G., Asst. Prof., Deptt. of Industrial Engg. & Mgmt. Dr. Ambedkar Instt. of Tech., Bangalore, Karnataka

Mishra, R.C., Director, Aryavart Institute of Technology and Management, Lucknow, U.P. India Contents: Principles of Reliability • Statistics for Reliability • Reliability of Systems • Failure Statistic for Reliability• Design for Reliability • Quality and Reliability • Reliability and Simulation • Reliability Improvement • Reliability Assessment • Reliability Testing • Maintenance Information Systems • Maintenance Concepts • Maintenance Practices • Condition based Maintenance • Computers in Maintenance • Organizational Structure for Maintenance • Economic Aspects of Maintenance • Maintenance and Environment • Maintenance Material Planning and Control • Manpower in Maintenance • Maintenance Equipment and Facilities. ISBN: 978-81-224-1741-8 Reprint: 2012 Pages: 216

Contents: Quality and Quality Control • Probability Distributions • An Overview of Total Quality Management • Leadership • Tool and Techniques of TQM • Statistical Process Control • Control Charts for Attributes. ISBN: 978-81-224-1799-9 Reprint: 2012 Pages: 266

Publication Year: 2006 Edition:1st Price: 120.00 Paperback

IN OPERATIONS RESEARCH AND SYSTEMS ANALYSIS

Nakra, B.C., Emeritus Professor, Deptt. of Mechanical Engg., Indian Institute of Tech. Delhi

Mital, K.V., Retd. Professor of Mathematics, University of Roorkee Roorkee, Uttarakhand Mohan, C., Professor, Deptt. of Computer Science, Ambala College of Engg. & Applied Research, Ambala Cantt., Haryana

Contents: Introduction • Representation of Processes and Control Elements • Representation of Feedback Control Systems • Types of Controllers • Transient and Steady State Response • Frequency Response Analysis • Stability of Control Systems • Root Locus Method • Control Systems Design • Digital Control System • State Space Analysis of Control Systems • Control Applications • Sequence Control • Solution of Differential Equations • Laplace Transforms of Some Functions • z-Transforms.

Contents: Mathematical Preliminaries • Extrema of Functions • Linear Programming • Transportation and Assignment Problems • Flow and Potential in Networks • Integer Programming • Additional Topics in Linear Programming • Kuhn-Tucker Theory and Nonlinear Programming • Geometric Programming • Dynamic Programming.

ISBN: 978-81-224-1686-2 Reprint: 2012 Pages: 336

Publication Year: 1996 Edition: 3rd Price: 195.00 Paperback

Nijaguna, B.T., Principal, I S S Academy of Technical Education, Bangalore, Karnataka

Nagaraj, P.B., Senior Lecturer, Deptt. of Mechanical Engineering, Bangalore, Karanataka Venkatesh, D., Senior Lecturer, Deptt. of Mechanical Engineering, M.S.R.I.T., Bangalore, Karnataka

Contents: Introduction • Materials for Biomethanation and Products of Methanation • Kinetics and Physico-Chemical Factors Affecting Biogasification • Bio-reactors • Design, Selection, Construction and Operation of Biogas Plants • Purification, Scrubbing, Compression and Storage of Biogas • Utilisation Systems of Biogas • Ethanol.

Contents: Basic Concepts and Definitions • Work and Heat • First Law of Thermodynamics • Second Law of Thermodynamics • Entropy • Pure Substances • Ideal Gases and Mixtures of Ideal Gases • Real Gases.

ISBN: 978-81-224-1380-9 Reprint: 2012 Pages: 300

Publication Year: 2005 Edition: 1st Price: 150.00 Paperback

Publication Year: 2002 Edition: 1st Price: 299.00 Paperback

135 REFRIGERATION AND AIR CONDITIONING

131 STATISTICAL DATA BOOK Nagarazan, R.S., Director, Arunai Engineering College, Tiruvannamalai Tamil Nadu Muralidharan, C., Professor, Deptt. of Manufacturing Engg., Annamalai University, Annamalai Nagar, Tamil Nadu

Prasad, Manohar, Former Professor Department of Mechanical Engineering Indian Institute of Tech., Kanpur, India Contents: Part I: Introduction and Recapitulation of Thermodynamics: Introduction • Recapitulation of Thermodynamics. Part II: Thermodynamic Analysis of Refrigeration Cycles and Refrigerants: Carnot, Brayton and Aircraft Refrigeration Systems • VapourCompression Systems • Water Refrigeration • Vortex and Pulse Tube Refrigeration Systems • Vapour-Absorption System • Thermoelectric Refrigeration Systems • Refrigerants. Part III: Psychrometrics, Cooling and Heating Load Calculations, Design and Balancing of System Components: Psychrometrics • Cooling and Heating Local Calculations • Design of Refrigeration Equipments • Balancing of Components of Refrigeration Systems, Control and Protection Devices. ISBN: 978-81-224-1429-5 Publication Year: 2003 Edition: 2nd Reprint: 2012 Pages: 672 Price: 299.00 Paperback

Contents: Part I: Parametric Tables: Area Under Normal Curve • Individual Binomial Distribution • Summation of Terms of Poisson, Exponential and Binomial Limits • Values of Gamma Functions 2 • The t-Distribution • Percentage Points of the f-Distribution • Percentage Points of x Distribution • Critical Values for the Sign Test. Part II: Non-parametric Tables: Critical Values for Wilcoxon Signed Rank Test • Critical Values for the Wilcoxon Rank Sum Test • Values for Spearman’s Rank Correlation (rs) for Combined Areas in both Tails • Kendall’s Rank Correlation Coefficient. ISBN: 978-81-224-1778-4 Reprint: 2011 Pages: 60

Publication Year: 2005 Edition: 2nd Price: 195.00 Paperback

134 BIOGAS TECHNOLOGY

130 BASIC THERMODYNAMICS

ISBN: 978-81-224-1613-8 Reprint: 2011 Pages: 344

Publication Year: 2006 Edition: 1st Price: 125.00 Paperback

133 THEORY AND APPLICATIONS OF AUTOMATIC CONTROLS

129 OPTIMIZATION METHODS

ISBN: 978-81-224-0873-7 Reprint: 2011 Pages: 404

BACK LIST

Publication Year: 2006 Edition: 2nd Price: 45.00 Paperback

17

MECHANICAL ENGINEERING

TEXTBOOKS

140 OPERATIONS RESEARCH

136 THERMODYNAMICS AND THERMAL ENGINEERING

Ramamurthy, P. Principal Intell Engineering College, Anantapur Andhra Pradesh

Rajadurai, J. Selwin, Lecturer Deptt. of Mechanical Engineering, Govt. College of Engg., Tirunelveli, Tamil Nadu

Contents: Historical Development • Linear Programming Models (Resource Allocation Models) • Linear Programming Models (Solution by Simplex Method) • Linear Programming-II (Transportation Problem) • Linear ProgrammingIII (Assignment Model) • Sequencing Model • Replacement Model • Inventory Control • Waiting Line theory or Queuing Model • Theory of Games of Competitive Strategies • Dynamic Programming • Decision Theory • Simulation • Introduction to Non-Linear Programming • Programme Evaluation and Review Technique and Critical Path Method (PERT and CPM).

Contents: Part I: Basic concept of Thermodynamics: Introduction • Energy • The First Law of Thermodynamics • Second Law of Thermodynamics • Entropy • Thermodynamic Processes • Availability • Properties of Gases and Gas Mixtures. Part II: Applied Thermodynamics: Properties of Steam • Fuel • Thermodynamic Air Standard Cycle • Brayton Cycle— The Ideal Cycle for Gas Turbine Engine • Vapour and Combined Power Cycles • Psychrometry. Part III: Thermal Engineering: Boilers • Steam Nozzles • Steam Turbine• Steam Condenser • Jet Propulsion • Rocket Propulsion • Reciprocating Compressor • Rotary Air Compressors • Internal Combustion Engines • Basic Concepts of Turbo Machinery • Refrigeration • Air Conditioning System • Introduction to Gas Dynamics. ISBN: 978-81-224-1493-6 Pages: 1102 Price: 295.00

Publication Year: 2003 Paperback

ISBN: 978-81-224-2069-2 Reprint: 2010 Pages: 726

Edition: 1st

Ramamurthy, P. Principal, Intell Engineering College, Anantapur Andhra Pradesh Contents: Production and Operations Management • Pre-Planning Stage or Product Design Stage • Forecasting • Production Planning • Scheduling, Loading, Despatching and Expediting • Production Control • Capacity Management • Plant Location and Layout • Materials Handling • Statistical Quality Control • Plant Maintenance and Maintenance Management • Value Analysis and Value Engineering • Materials Management and Inventory Control • Work Study • Use of Computers in Production Operations Management • Productivity Engineering and Management • PERT and CPM Scheduling Techniques.

Rajagopalan, V., Reader, Deptt. of Statistics Annamalai University, Annamalai Nagar Tamil Nadu C o n t e n t s : Introduction • Parametric Tests • Analysis of Variance Tests • Multivariate Tests • Non-parametric Tests • Sequential Tests.

ISBN: 978-81-224-1558-2 Reprint: 2013 Pages: 448 Publication Year: 2006 Paperback

Publication Year: 2007 Edition: 2nd Price: 295.00 Paperback

141 PRODUCTION AND OPERATIONS MANAGEMENT

137 SELECTED STATISTICAL TESTS

ISBN: 978-81-224-1840-8 Pages: 260 Price: 145.00

BACK LIST

Publication Year: 2005 Edition: 2nd Price: 195.00 Paperback

Edition: 1st

142 METAL CASTING Principles and Practice

138 BASIC MECHANICAL ENGINEERING

Ramana Rao, T.V., Professor Department of Mechanical Engineering, M.J. College of Engineering and Technology

Rajan, T.S., Retd. Professor Deptt. of Mechanical Engg., National Institute of Technology, Trichy

Contents: Introduction • Sand Molding Processes Molding Processes Using Metal Molds • Melting Furnaces and Techniques • Solidification Gating Risering and Casting Design • Finishing Operations • Inspection and Quality Control • Foundry Mechanization • Planning and Management Foundry.

Contents: Part I: Power Plants: Energy and its Sources • Utilization of Conventional Energy. Part II: Production Processes: Casting • Forging • Metal Joining • Machining.

ISBN: 978-81-224-1172-0 Reprint: 2012 Pages: 236

ISBN: 978-81-224-0843-0 Reprint: 2010 Pages: 304

Publication Year: 1998 Edition: 3rd Price: 199.00 Paperback

143 ENVIRONMENTAL POLLUTION CONTROL ENGINEERING

139 FLUID MECHANICS AND MACHINERY

Rao, C.S., Director, Sardar Patel Renewable Energy Research Institute Anand, Gujarat

Rama, Durgaiah D., Fromer Director and Professor, JNTU, Hyderabad Contents: Properties of Fluids • Fluid Statics • Fluid Kinematics • Fluid Dynamics • Flow Measurement • Flow through Pipes • Viscous Flows • Boundary Layer Flows • Turbulent Flows • Compressible Fluid Flow • Flow Through Open Channels • Dimensional and Model Analysis • Hydraulic Turbines • Pumps • Hydraulic Systems. ISBN: 978-81-224-1386-1 Reprint: 2011 Pages: 912

Publication Year: 1996 Edition: 1st Price: 200.00 Paperback

Contents: Impact of Man on the Environment: An Overview • Air Pollution: Sources and Effects • Meteorological Aspects of Air Pollutant Dispersion • Air Pollution Sampling and Measurement • Air Pollution Control Methods and Equipment • Control of Specific Gaseous Pollutants • Sources and Classification of Water Pollutants • Wastewater Sampling and Analysis • Waste Water Treatment • Solid Waste Management • Hazardous Waster Management. ISBN: 978-81-224-1835-4 Publication Year: 2006 Edition: 2nd Reprint: 2013 Pages: 440 Price: 299.00 Paperback

Publication Year: 2002 Edition: 1st Price: 295.00 Paperback

18

MECHANICAL ENGINEERING

TEXTBOOKS

144 FINITE ELEMENT METHOD VS. CLASSICAL METHODS

148 INDUSTRIAL ENGINEERING AND MANAGEMENT

Rao, H.S. Govinda, Professor & Head Deptt. of Mathematics, Dr. Ambedkar Instt. of Technology, Bangalore, Karnataka

Through Questions and Answers Reddy, C. Natha Muni, Professor and Head Department of Mechanical Engineering, Annamacharya Institute of Technology and Sciences, Andhra Pradesh

Contents: Fundamental Concepts • Matrix Algebra and Gaussian Elimination • One-dimensional Problems • Trusses • Two-Dimensional Problems Using Constant Strain Triangles •Three-dimensional Finite Elements • Isoparametric Elements, Numerical Integration & Higher Order Elements • Dynamic Analysis • Axi-Symmetric Elements. ISBN: 978-81-224-2050-0 Publication Year: 2007 Edition: 1st Reprint: 2008 Pages: 436 Price: 195.00 Paperback

Contents: Part 1: Method Design and Work Measurement to Improve Productivity: Productivity Engineering • Work Method Design • Job-Evaluation and Merit Rating. Part II: Optimization Te chniques: Basics o f Optimization and Linear Programming Techniques • Classical Optimization. Part III: Design of Manufacturing System: Forecasting • Plant Location. Part IV: Controlling the Manufacturing System: Inventory Management.

145 MECHANISM AND MACHINE THEORY

ISBN: 978-81-224-1362-5 Reprint: 2011 Pages: 462

Rao, J.S., Prof. Deptt. of Mechanical Engineering, BHEL Chair, Indian Institute of Technology, New Delhi, India Dukkipati Rao V., PhD, PE Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA

Publication Year: 2002 Edition: 1st Price: 200.00 Paperback

149 A MODERN APPROACH TO OPERATIONS MANAGEMENT Roy, Ram Naresh, Former Prof. Addis Ababa University, Ministry of Education Ethopia Contents: Production Systems and Operations Management • Location of Production and Service Facilities • Layout Planning • Purchasing Systems and Vendor Rating • Operations Planning and Control • Inventory Control • Material Requirement Planning • Just-In-Time Approach • Project Management • Quality Control • Total Quality Management and ISO-9000 • Linear Programming • Methods Engineering • Mechanization, Automation and Productivity • Value Analysis and Value Engineering.

Contents: Introduction • Planar Mechanisms • Kinematic Analysis of Mechanisms • Kinematic Synthesis of Mechanisms • Simple Mechanisms and Coupler Curves • Cams • Spur Gears • Helical, Spiral, Worm and Bevel Gears • Gear Trains • Hydrodynamic Lubrication • Static Force Analysis • Inertia Force Analysis • Combined Static and Inertia Force Analysis • Turning Moment Diagram and Flywheel • Balancing of Rotating Components. ISBN: 978-81-224-0426-5 Publication Year: 1992 Edition: 2nd Reprint: 2012 Pages: 624 Price: 299.00 Paperback

ISBN: 978-81-224-1627-5 Reprint: 2008 Pages: 344

146 INTRODUCTORY COURSE ON

Publication Year: 2005 Edition: 1st Price: 150.00 Paperback

150 ENERGY AND FINITE ELEMENT METHODS IN STRUCTURAL MECHANICS

THEORY AND PRACTICE OF

MECHANICAL VIBRATIONS Rao, J.S., Prof. Deptt. of Mechanical Engineering, BHEL Chair, Indian Institute of Technology, New Delhi, India Gupta, K. Professor Deptt. of Mechanical Engineering, Indian Institute of Technology, Delhi, India

Shames, Irving H., State University of New York, Buffalo Dym, Clive I., University of Massachusetts Amherst Contents: Foundations of Solid Mechanics and Variational Methods: Theory of Linear Elasticity • Introduction to the Calculus of Variations • Variational Principles of Elasticity. Structural Mechanics: Beams • Torsion • Classical Theory of Plates • Dynamics of Beams and Plates • Elastic Stability. Finite Elements: Introduction to Finite Elements • Finite Elements for Beams • Elements and Interpolation Functions • Plane Stress • Finite Elements for Plates • Torsion • Finite Elements for Elastic Stability • Finite Elements for Dynamics • Broader Aspects of Finite Elements.

Contents: Fundamentals of Vibration • Single Degree of Freedom Systems—Free Vibrations • Single Degree of Freedom System—Damped Vibrations • Single Degree of Freedom System— Forced Vibrations • Two Degrees of Freedom Systems • Multi Degree of Freedom Systems • Numerical Methods • Continuous Systems • Experimental Methods in Vibration Analysis • Random Vibration. ISBN: 978-81-224-1215-4 Publication Year: 1999 Edition: 2nd Reprint: 2013 Pages : 552 Price: 225.00 Paperback

ISBN: 978-81-224-0749-5 Reprint: 2009 Pages: 780

147 THE THEORY OF

MACHINES Through Solved Problems

Publication Year: 1991 Edition: 1st Price: 265.00 Paperback

151 INDUSTRIAL SECURITY

MANAGEMENT

Rao, J.S., Prof. Deptt. of Mechanical Engineering, BHEL Chair, Indian Institute of Technology, New Delhi, India

Sharma, R.P., Director, Distance Learning Indian Institute of Modern Management Pune, Maharashtra

Contents: Introduction • Planar Mechanisms • Kinematic Analysis of Mechanisms • Kinematic Synthesis of Mechanisms • Simple Mechanisms and Coupler Curves • Cams • Spur Gears • Helical, Spiral, Worm and Bevel Gears • Gear Trains • Hydrodynamic Lubrication • Static Force Analysis • Intertia Force Analysis • Combined Static and Inertia Force Analysis • Turning Moment Diagram and Flywheel • Balancing of Rotating Components • Balancing of Linkages • Gear and Cam Forces. ISBN: 978-81-224-1041-9 Reprint: 2012 Pages: 404

BACK LIST

Contents: Violence: Historical Background • Violence in Society • Industrial Security-General • Perspective of Security and Safety in Society • Progressive Path of Commercial and Personnel Security • Security Management in Commercial Organisations • Functions and Parameters of Commercial Security • Induction of Modern Equipments in Industrial and Corporate Security • Industrial Crime Management • Investigation and Reporting of Offences.

Publication Year: 1996 Edition: 1st Price: 299.00 Paperback

ISBN: 978-81-224-1519-3 Reprint: 2013 Pages: 260

19

Publication Year: 2004 Edition: 1st Price: 110.00 Paperback

MECHANICAL ENGINEERING

TEXTBOOKS

152 LINEAR PROGRAMMING

156 EXERCISE WORKBOOK FOR BEGINNING AutoCAD

Methods and Applications Shenoy, G.V., Professor, School of Management, University Sains Malaysia Penang, Malayasia

Shrock, Cheryl R., Prof., Computer Aided Design, Orange Coast College, Costa Mesa California, USA

Contents: Formulation of the Problem and Solution by Graphical Method • The Simplex Method • Duality and Sensitivity Analysis • The Transportation Models • The Assignment Models • Integer Programming. ISBN: 978-81-224-1034-1 Reprint: 2008 Pages: 236

Contents: Introduction • Lesson 1• Lesson 2 • Lesson 3 • Lesson 4 • Lesson 5• Lesson 6 • Lesson 7 • Lesson 8 • Lesson 9• Lesson 10 • Lesson 11• Lesson 12 • Lesson 13• Lesson 14 • Lesson 15 • Lesson16 • Lesson 17• Lesson 18 • Lesson 19 • Lesson 20 • Lesson 21• Lesson 22 • Lesson 23 • Lesson 24 • Lesson 25 • Lesson 26 • Lesson 27 • Lesson 28 • Lesson 29 • Lesson 30 • Appendix.

Publication Year: 1998 Edition: 2nd Price: 195.00 Paperback

ISBN: 978-81-224-1805-7 Reprint: 2008 Pages: 280

153 OPERATIONS RESEARCH

FOR MANAGEMENT

Shukla, R.K., Reader, Deptt. of Physics Lucknow University, Lucknow, U.P. Srivastava, Anchal, Reader, Deptt. of Physics, Lucknow University, Lucknow, U.P. Contents: Measurement • Force and Motion • Dynamics of Circular Motion and the Gravitational Field • Work, Energy and Momentum • Linear and Angular Momentum • Collision • Rotational Kinematics • Moment of Inertia • Mechanical Properties of Matter • Fluids • Harmonic Motion • Wave Motion • Stationary Waves (Waves in a LinearBounded Medium) • Damped and Forced Harmonic Oscillation • Relativity.

Contents: Linear Programming • The Transportation Problem • Theory of Games • Network Analysis—PERT/CPM • Waiting Lines • Inventory Control Models • Replacement Decisions • Sequencing Models • Integer Programming • Dynamic and Goel Programming • Simulation of Management Systems. Publication Year: 1991 Edition: 2nd Price: 200.00 Paperback

ISBN: 978-81-224-1875-0 Reprint: 2012 Pages: 730

154 FLEXIBLE MANUFACTURING SYSTEM

Publication Year: 2006 Edition: 1st Price: 350.00 Paperback

158 ENGINEERING THERMODYNAMICS

Shivanand, H.K., Assistant Professor Department of Mechanical Engg., S.M. Visvesvaraya, Institute of Technology Bangalore, Karnataka Benal, M.M., Faculty, Department of Mechanical Engineering, S.M. Visvesvaraya, Institute of Technology Bangalore, Karnataka Koti, V., Faculty, Department of Mechanical Engineering, M.S. Ramaiah Institute of Technology Bangalore, Karnataka

Singh, Onkar, Professor Deptt. of Mechanical Engg., Harcourt Bulter Technological Inst., Kanpur, U.P. Contents: Fundamental Concepts and Definitions • Zeroth law of Thermodynamics • First Law of Thermodynamics • Second Law of Thermodynamics • Entropy • Thermodynamic Properties of Pure Substance • Availability and General Thermodynamic Relations • Vapour Power Cycles • Gas Power Cycles • Introduction to Internal Combustion Engines • Introduction to Refrigeration and Air Conditioning • Introduction of Heat Transfer.

Contents: FMS Introduction and Description • Manufacturing Cell • JIT and KANBAN System • Group Technology • Machining Centers • Deburring and Wash Stations • Coordinate Measuring Machines • Automated Material Movement and Storage System • Cutting Tools and Tool Management • System Hardware and General Functionality • FMS Software Structure, Functions and Description. ISBN: 978-81-224-1870-5 Reprint: 2010 Pages: 164

Publication Year: 2006 Edition: 1st Price: 295.00 Paperback

157 MECHANICS

Shenoy, G.V., Professor, School of Management, University Sains Malaysia Penang, Malayasia Srivastava, U.K., Professor, Indian Institute of Management, Ahmedabad Sharma, S.C., Institute of Plantation Management Bangalore

ISBN: 978-0-85226-917-6 Reprint: 2007 Pages: 410

BACK LIST

ISBN: 978-81-224-1750-0 Reprint: 2012 Pages: 576

Publication Year: 2006 Edition: 1st Price: 250.00 Paperback

159 ELEMENTARY MECHANICS OF SOLIDS

Publication Year: 2006 Edition: 1st Price: 125.00 Paperback

Shrock, Cheryl R. , Prof., Computer Aided Design,Orange Coast College, Costa Mesa California, USA

Singh, P.N., Professor, Department of Mechanical Engineering, Bihar Institute of Technology, Sindri Jha, P.K., Assistant Professor, Department of Mechanical Engineering, Bihar Institute of Technology, Sindri

Contents: Introduction • Lesson 1• Lesson 2 • Lesson 3 • Lesson 4 • Lesson 5• Lesson 6 • Lesson 7 • Lesson 8 • Lesson 9• Lesson 10 • Lesson 11• Lesson 12 • Lesson 13• Lesson 14 • Lesson 15 • Lesson16 • Lesson 17• Lesson 18 • Lesson 19 • Lesson 20 • Lesson 21• Lesson 22 • Lesson 23 • Lesson 24 • Lesson 25 • Lesson 26 • Lesson 27 • Lesson 28 • Lesson 29 • Lesson 30 • Appendix.

Contents: Introduction and Fundamental Concepts • Simple Stress and Strain • Torsion • Shearing Force and Bending Moment • Stresses Due to Bending • Deflection of Beams • Stress and Strain Analysis. Part A: Two-Dimensional Cases. Part B: General State of Stress and Strain • Combined Loading and Theories of Elastic Failure • Elastic Stability of Columns • Elastic Strain Energy and its Applications. Part A: Strain Energy Concept. Part B: Energy Methods . Part C: Energy Theories of Elastic Failure.

155 EXERCISE WORKBOOK FOR ADVANCED AutoCAD

ISBN: 978-81-224-1806-4 Reprint: 2008 Pages: 280

Publication Year: 2006 Edition: 1st Price: 295.00 Paperback

ISBN: 978-0-85226-819-3 Reprint: 2011 Pages: 632

20

Publication Year: 1980 Edition: 1st Price:175.00 Paperback

MECHANICAL ENGINEERING

TEXTBOOKS

164 LABORATORY MANUAL ON TESTING OF ENGINEERING MATERIALS

160 PROBLEMS AND SOLUTIONS IN MECHANICAL ENGINEERING Singh, U.K., Asst. Prof., Deptt.of Mechanical of Engineering, Kamla Nehru Instt. of Tech. Sultanpur, Uttar Pradesh Dwivedi, Manish, Assistant Professor Department of Mechanical Engg., College of Engg., Science and Technology, Gaura Mohanlal Ganj, Lucknow, U.P.

Sood, Hamant Contents: Unit-l: Bricks • Unit-II: Building Stones • Unit-III: Metals • Unit-IV: Timber • Unit-V: Lime.

Contents: Part A: Thermodynamics • Part B: Engineering Mechanics • Part C: Strength of Materials. ISBN: 978-81-224-2100-2 Reprint: 2008 Pages: 530

ISBN: 978-81-224-0757-0 Reprint: 2009 Pages: 88

Publication Year: 2007 Edition: 1st Price: 250.00 Paperback

VIBRATIONS Srinivasan, P., Former Professor, Visiting Research, University of Concordia Canada

Sirohi, R.S., Professor, Department of Physics, Indian Institute of Technology, Chennai

Contents: Introduction • Undamped Free Vibrations • Forced Vibrations• Damped Free Vibrations • Damped Forced Vibrations • SelfExcited Oscillations • Analysis of Singular Points • Stability of Nonlinear Systems • Special Methods • Transient Analysis of Nonlinear Nonconservative Systems • Two and Three Degree Freedom Systems.

Radhakrishnan, H.C., Professor, Department of Mechanical Engineering, Indian Institute of Technology, Chennai Contents: Basic Concepts of Measurements • Performance Characteristics of Measuring Instruments • Inaccuracy of Measurement and Its Analysis • Measurement of Force and Torque • Measurement of Strain and Stress • Measurement of Pressure • Flow Measurement and Flow Visualisation • Measurement of Temperature • Optical Methods of Measurements • Fibre-Optics in Measurement.

ISBN: 978-81-224-0720-4 Reprint: 2008 Pages: 300

Publication Year: 1991 Edition: 3rd Price: 165.00 Paperback

Srivastava, P.K., Reader, Department of Physics, D.A.V. College, Kanpur Uttar Pradesh Contents: Space-Time Structure, Newton’s Laws and Galilean Transformation • Non-Inertial Frames and Inertial Forces • Motion in Electric and Magnetic Fields • Conservation of Energy • Conservation of Momentum • Angular Momentum and Rigid Body Dynamics • Motion in Central Forces: The Universal Gravitation • Harmonic Oscillations • Damped and Forced Harmonic Oscillations • Vibrations of a Continuous System (Stationary Waves) • Wave Motion (Progressive Waves) • Special Theory of Relativity.

Somasundaram, S.L., Principal, Sairam Engineering College, Madras Contents: Fundamental Concepts • First Law of Thermodynamics • Second Law of Thermodynamics • Properties of Thermodynamic Substances • Laws of Thermodynamics and Non-Flow System • Laws of Thermodynamics and Flow System • Gas and Gas-Vapour Mixture • Availability and Availability Analysis.

ISBN: 978-81-224-1905-4 Reprint: 2009 Pages: 472

Publication Year: 1996 Edition:1st Price: 175.00 Paperback

Publication Year: 2007 Edition: 2nd Price: 250.00 Paperback

167 ADVANCES IN PRODUCT DEVELOPMENT

163 THERMAL ENGINEERING Somasundaram, S.L., Principal, Sairam Engineering College, Madras

Srivastava, R.K., Professor, Deptt. of ME Motilal Nehru National Instt. of Technology Allahabad, Uttar Pradesh Gupta, Y.K. Bhatt, A.D. Contents: Keynote: Towards Degree in Design • Computer Aided Design of General Elliptical Gear • Computer Aided Synthesis of 3-d Fractal Surface for Contact Analysis • Towards Virtural Assembly • Feature Recognition of Prismatic Parts • Characterisation and Identification of Complex Kinematics Chains and Mechanisms. ISBN: 978-81-224-1851-4 Publication Year: 2006 Edition: 1st Reprint: 2010 Pages: 508 Price: 395.00 Paperback

Contents: Thermodynamic Cycles for Gas Engines • Internal Combustion Engines • Testing of I.C. Engines • Vapour Power Cycles • Flow Through Nozzles and Diffusers • Steam Turbines • Psychrometrics • Refrigeration • Air Compressors.

ISBN: 978-81-224-0979-6 Reprint: 2009 Pages: 466

Publication Year: 1995 Edition: 1st Price: 195.00 Paperback

166 MECHANICS

162 ENGINEERING THERMODYNAMICS

ISBN: 978-81-224-0984-0 Reprint: 2012 Pages: 302

Publication Year: 1996 Edition: 1st Price: 125.00 Paperback

165 NONLINEAR MECHANICAL

161 MECHANICAL MEASUREMENTS

ISBN: 978-81-224-0383-1 Reprint: 2010 Pages: 306

BACK LIST

Publication Year: 1996 Edition: 1st Price:195.00 Paperback

Visit us at: www.newagepublishers.com

E-mail: [email protected] 21

MECHANICAL ENGINEERING

TEXTBOOKS

172 INDUSTRIAL STEEL REFERENCE BOOK

168 C & DATA STRUCTURES BY PRACTICE

Bagchi, S.N., Retd. Director, Central Scientific Instruments Organisation, Chandigarh, Haryana Prakash, Kuldip, Retd. Scientist, Central Scientific Instruments Organisation, Chandigarh, Haryana

Vasappanavara, Ramesh, Head, Department of Computer Science and Engineering at Gayatri Vidya Parishad College of Engineering, Visakhapatnam, AP Vasappanavara, Anand Vasappanavara, Gautam

Contents: Carbon Steels • Case Hardening Steels • Alloy Steels • Corrosion Resistant Steels • Tool Steels • Steels Specified Only by Tensile Strength • Special Purpose Alloys • Hardenability Curves • Hardness Conversion • Curves • Stress Conversion Tables.

Contents: Around the World of C • Programming Basics • Control Statements • Functions and Storage Classes • Arrays & Strings • Pointers • Structures & Unions • Files • Linear Data Structures • Stacks • Queues • Non Linear Data Structures: Trees • Graphs • Searching and Sorting • JNTU Question Papers and Solutions. ISBN: 978-81-224-2021-0 Publication Year: 2007 Edition: 1st Reprint: 2010 Pages: 508 Price: 250.00 Paperback

ISBN: 978-0-85226-089-0 Reprint: 2010 Pages : 208

Publication Year: 1986 Edition: 2nd Price : 350.00 Hardbound

173 QUALITY ASSURANCE

169 ENGINEERING

In Small and Medium Sized Industries

DRAWING AND GRAPHICS Plane Geometry, Solid Geometry, Nomography

Besterfield, Dale H., Principal of Besterfield & Associates, Carbondale Illinois, U.S.A.

Venugopal, K., Former Professor of Mechanical Engineering, Government College of Technology, Coimbatore, T.N.

Contents: Basic Concepts of Quality Management in Small and Medium-Sized Industries and Job Shop Manufacture • Quality Management • Organization for Quality • Human Resources Development and Management • Team Work in Quality Improvements • Customer Focus and Satisfaction • Incoming Materials Control and Supplier Management • Planning for Quality with QFD • Statistical Process Control • Short Run Statistical Process Control • Quality Management Systems and Meeting ISO 9000 Requirements • Taguchi’s Quality Engineering.

Contents: Importance of Engineering Drawing • Engineering Drawing Instruments and Uses • B.I.S. and I.S.O. Conventions. Plane Geometry: Geometrical Constructions • Scales • Conic Sections • Special Curves. Solid Geometry: Orthographic Projection • Projections of Points • Projections of Straight Lines • Projections of Planes • Projections of Solids • Auxiliary Projections of Solids • Sections of Solids • Intersection of Surfaces • Development of Surfaces • Isometric Projections • Oblique Projection • Perspective Projection • Free Hand Sketching • Conversion of Pictorial Views to Orthographic Views. Nomography: Nomography.

ISBN: 978-81-224-1205-5 Reprint: 2011 Pages: 314

ISBN: 978-81-224-1545-2 Publication Year: 2004 Edition: 5th Reprint: 2012 Pages : 410 Price: 250.00 Paperback

REFERENCE BOOKS

BACK LIST

Publication Year: 2000 Edition: 1st Price : 750.00 Hardbound

174 PROBABILITY MODELS AND STATISTICS

BACK LIST

Borthakur, A.C., Professor, Department of Statistics, Gauhati University, Guwahati, India Choudhuary, H., Professor, Department of Statistics, Gauhati University, Guwahati, India Contents: Stochastic Convexity and Submodularity, with Production Applications • Statistical Functionals, Hadamard Differentiability and Martingales • Branching Stochastic Processes • Nonlinear (non Gaussian) Time Series, Chaos and Higher Order Spectra • A Heuristic for the M X/G/c/c Loss Model • Controlling Traffic Intensity in a Queue Using Queue Length Information • Some Results for Renewal Arrival to a Communication Link • Transient Analysis of Non-Markovian Queues via Markov Regenerative Processes • Transient Behaviour of the Discrete-Time Geom/Geom/m/m Erlang Loss Model • Power Generating System Production Costs Using a Markov Model. ISBN: 978-81-224-0879-9 Publication Year: 1996 Edition: 1st Reprint: 2007 Pages: 284 Price: 550.00 Hardbound

170 COMPUTATIONAL ASPECTS IN CHAOS AND NONLINEAR DYNAMICS Ambika, G.

Nandakumaran, V.M., Professor Department of Physics, Indian Institute of Science Bangalore, Karnataka Contents: Part I: Invited Lectures: Wavelength Doubling Bifurcations in Spatio-Temporal Systems • Stick-Slip and Earthquakes • Initial Condition Sensitivity in Chaotic and Stochastic Dynamics. ISBN: 978-81-224-0700-6 Publication Year: 1994 Edition: 1st Reprint: 2010 Pages: 242 Price: 450.00 Hardbound

171 HEAVY METALS AND ENVIRONMENT

175 COMPUTER AIDED ENGINEERING AND DESIGN

Athar, Mohammad, Professor and Head Deptt. of Medical Elementology and Toxicology and Faculty of Science Jamia Hamdard, Hamdard University Hamdard Nagar, New Delhi Vohora, Shashi B., Retd. Prof. and Head Medical Elementology & Toxicology Hamdard University, Hamdard Nagar New Delhi

Browne, Jim, Director, CIM Research Unit, University College, Galway, Ireland Contents: The Extended Enterprise: A Context for Product Development and Production • Product Design in Concurrent Engineering Environment • Computer Aided Design Modelling Approaches • Data Exchange Standards for Computer Aided Engineering • CAD/CAM Integration and Related Topics • From CAD/CAM

Contents: Introduction • Heavy Metals in the Biosphere • Environmental Pollution • Health Effects • Future Trends • Suggested Readings. ISBN: 978-81-224-0769-3 Publication Year: 1995 Edition: 1st Reprint: 2009 Pages : 224 Price: 450.00 Hardbound

to CIM Floor Integration. ISBN: 978-81-224-1208-6 Reprint: 2010 Pages: 460

22

Publication Year: 2000 Edition: 1st Price: 975.00 Hardbound

REFERENCE BOOKS

MECHANICAL ENGINEERING

176 USES OF METALS AND METALLIC MINERALS

180 ALTERNATIVE LIQUID FUELS

Chatterjee, K.K., Retd. Chief Mineral Economist, Head of the Mineral Economics Division, Indian Bureau of Mines, Katol Road, Nagpur, Maharashtra

Desai, A.V., Consultant Editor, ABP (P) Ltd. New Delhi Contents: Introduction • Alternative Fuels: A Brazilian Outlook • Alternative Transport Fuels: Supply, Consumption and Conservation.

Contents: Section I: Metallic Minerals: Bauxite and Aluminium • Chromite • Ilmenite and Titanium • Iron Ore: Hematite • Iron Ore: Magnetite • Iron Ore: Siderite • Iron Ore: Taconite Iron Ore: Others • Lithium Minerals and Metal • Manganese Ore. Section II: Metals: Beryllium • Cadmium • Calcium • Cesium • Cobalt • Copper • Gallium • Germanium • Gold • Indium • Lead • Magnesium • Mercury • Molybdenum • Nickel • Niobium (Columbium) • Platinum Group Metals • Potassium • Rare Earth Metals • Rhenium • Rubidium • Silver • Sodium • Tantalum • Thallium • Tin • Tungsten • Vanadium • Zinc. Section III: Metalloids: Antimony • Arsenic. ISBN: 978-81-224-2040-1 Publication Year: 2007 Edition: 1st Pages: 332 Reprint: 2009 Price: 395.00 Hardbound

ISBN: 978-81-224-2455-3 Reprint: 2008 Pages: 168

Dukkipati Rao V., PhD, PE Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA

Chatterjee, K.K., Retd. Chief Mineral Economist, Head of the Mineral Economics Division, Indian Bureau of Mines, Katol Road, Nagpur, Maharashtra

Rao M., Ananda, Department of Mechanical Engineering, Andhra University, Waltair, India Bhat, Rama, Department of Mechanical Engineeirng, Concordia University, Montreal, Canada

Contents: Introduction • Coal • Petroleum • Natural Gas • Uranium Ore and Metal • Lignite • Monazite and Thorium • Peat • Anthracite.

Contents: Computer Aided Aspects of Mechanical Design • Theories of Failure • Optimization of the Design • Static Analysis • Transient Analysis • Dynamic Analysis • Finite Element Analysis • Cyclic Symmetric Structures • Stress Analysis of Structural Members and Machine Components.

Publication Year: 2006 Edition: 1st Price: 195.00 Hardbound

ISBN: 978-81-224-1256-7 Reprint: 2010 Pages: 488

178 HANDBOOK OF GEAR TECHNOLOGY

Publication Year: 2006 Edition: 1st Price: 450.00 Hardbound

182 SOLVING ENGINEERING SYSTEM DYNAMICS PROBLEMS WITH MATLAB

Chawathe, D.D., Director, Gear Technology Enterprise, Mumbai, Maharashtra

Dukkipati Rao V., PhD, PE Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme, Fairfield University, Fairfield Connecticut, USA Contents: Introduction to Engineering System Dynamics • Control Systems • MATLAB Basics

Contents: Part I: Theory of Gears: Introduction • Gear Types and Meshing Requirements • Spur Gears • Addendum Modified Spur Gears and Other Tooth Modifications • Helical Gears • Bevel and Hypoid Gears • Worm Gears. Part II: Practice of Gears: Gear Materials and Material Treatment • Gear Lubrication and Gear Failures • Gear Manufacture • Gear Inspection GearCutting Tools. Part III: Design of Gears: Gear Forces and Bearing Reactions • Load Capacity of Spur Gears • Gears Load Capacity of Helical Gears • Load Capacity of Bevel and Hypoid Gears • Load Capacity of Worm Gear Drives • Gear Efficiency and Gear Classification• Gear Trains and Design of Gear Boxes. ISBN: 978-81-224-1255-0 Publication Year: 2001 Edition: 1st Reprint: 2011 Pages: 964 Price: 795.00 Hardbound

• MATLAB Tutorial. ISBN: 978-81-224-1993-1 Reprint: 2009 Pages: 358

179 FOUNDRY MOULDING MATERIALS AND POLLUTION Datta, G.L., Department of Mechanical Engg., IIT, Kharagpur, West Bengal De, K.B., Assistant Professor Department of Chemistry, IIT, Kharagpur, West Bengal Nag, A., Department of Chemistry, IIT, Kharagpur, West Bengal Contents: Organic Chemistry • Oils and Fats • Polymers • Foundry Sand Binders • Foundry Sands for Moulding • Foundry Clay Minerals • Foundry Environment. ISBN: 978-81-224-1841-5 Pages: 128 Reprint: 2010

Publication Year: 1990 Edition: 1st Price: 295.00 Hardbound

181 COMPUTER AIDED ANALYSIS AND DESIGN OF MACHINE ELEMENTS

177 USES OF ENERGY, MINERALS AND CHANGING TECHNIQUES

ISBN: 978-81-224-1803-3 Pages: 134 Reprint: 2009

BACK LIST

Publication Year: 2007 Edition: 1st Price: 425.00 Hardbound

183 SOLVING VIBRATION ANALYSIS PROBLEMS USING MATLAB Dukkipati Rao V., PhD, PE Fellow of ASME & CSME, Ex-Professor and Chair, Department of Mechanical Engineering, Ex-Director, Graduate Programme Fairfield University, Fairfield, Connecticut, USA Contents: Introduction to Mechanical Vibrations • MATLAB Basics • MATLAB Tutorial. ISBN: 978-81-224-2064-7 Reprint: 2009 Pages: 240

Publication Year: 2007 Edition: 1st Price: 495.00 Hardbound

Visit us at: www.newagepublishers.com Publication Year: 2006 Edition: 1st Price: 195.00 Hardbound

23

REFERENCE BOOKS

MECHANICAL E NGINEERING

184 MECHANICS OF SEDIMENT TRANSPORTATION AND ALLUVIAL STREAM PROBLEMS

188 HYDRAULIC DESIGN TABLES FOR PIPELINES, SEWERS AND DRAINAGE LINES Joshi, J.N., Retired Professor of Environmental Engg., L.D. College of Engg. Ahmedabad, Gujarat, India

Garde, R.J., Retd. Professor of Hydraulic Engg., Indian Inst. of Technology, Roorkee Uttarakhand Ranga Raju, K.K., Pro-Vice Chancellor and Professor of Civil Engineering, University of Roorkee, Roorkee, India

Contents: Section I: Pipes Flowing Under Pressure, Tables for Discharge and Loss of Head and Power • Section II: Pipes Flowing Full Under Gravity, Tables for Discharge and Gradients Required • Section III: Hydraulic Parameters of Pipes Flowing Partially Full.

Contents: Introduction • Origin and Properties of Sediments • Incipient Motion of Sediment Particles • Regimes of Flow • Resistance to Flow and Velocity Distribution in Alluvial Streams • Bed Load Transport and Saltation. ISBN: 978-81-224-1270-3 Publication Year : 2000 Edition: 3rd Reprint: 2010 Pages: 712 Price: 795.00 Hardbound

ISBN: 978-81-224-1867-5 Reprint: 2012 Pages: 96

185 STATISTICS AND PROBABILITY

Publication Year: 2006 Edition: 1st Price: 299.00 Hardbound

189 METALLIC CORROSION Principles and Control

A Raghu Raj Bahadur Festschrift

Khanna, A.S. Malhotra, S.N. Santhanam, K.V.S. Totlani, M.K.

Ghosh, J.K., Professor of Statistics, Purdue University, USA Mitra, S.K., Fellow of Indian National Science Academy, Indian Academy of Sciences, Institute of Mathematical Statistics, USA Parthasarathy, K.R., Emeritus Distinguished Scientist Indian Statistical Institute, New Delhi Rao, B.L.S. Prakasa, Dr. Homi J. Bhabha Chair Professor, University of Hyderabad, AP Contents: Under Squared Error and Absolute Deviation Loss • A Decision Theoretic Approach to Point and Interval Estimation of the Variance • Bayes and Empirical Bayes Rules for Selecting Fair Multinomial Populations. Asymptotic Equivalence of Regression Rank Scores Estimators and R-estimators in Linear Models • A test for Lorenz Ordering between Two Distributions. ISBN: 978-81-224-0541-5 Reprint: 2010 Pages: 578

BACK LIST

Contents: General Corrosion • High Temperature Corrosion • Corrosion Prevention • Corrosion Evaluation. ISBN: 978-81-224-0638-2 Reprint: 2008 Pages: 326

Publication Year: 1994 Edition: 1st Price: 450.00 Hardbound

190 CONCURRENT ENGINEERING IN PRODUCT DESIGN AND DEVELOPMENT

Publication Year: 1993 Edition: 1st Price: 550.00 Hardbound

186 ECONOMICS AND MANAGEMENT OF CONCRETE CONSTRUCTION AND ITS MAINTENANCE

Moustapha, I. Contents: Section One: Lecture Note • The Concurrent Engineering Organization • Concurrent Engineering: The Essential Ingredients for Achieving Business Success • The Enabling Tools & Techniques for Successful Concurrent Engineering Implementation • Quality Engineering: The Tools and Techniques Available to the Engineer • Manufacturing Strategy Decision Support Tools: Linking Corporate Vision to Measures of Manufacturing Performance in Concurrent Engineering • Developing Measures of Manufacturing Performance for Concurrent Engineering Implementation.

Gupta, Y.P., Retd. Prof., Department of Civil Engg. Motilal Nehru National Institute of Technology, Allahabad, U.P. Contents: Session I: Innovative Construction and Management Techniques. Session II: Economy Through Structural Design. Session III: Economy Through New Materials and Concrete Mix Design. Session IV: Case Histories. Session V: Rehabilitation and Repair of Concrete Structures. ISBN: 978-81-224-0616-0 Publication Year: 1994 Edition: 1st Reprint: 2010 Pages: 420 Price: 550.00 Hardbound

ISBN: 978-81-224-1309-0 Reprint: 2011 Pages: 304

Publication Year: 2001 Edition: 1st Price: 495.00 Hardbound

191 BOILER OPERATIONS

187 LUBRICATING GREASE MANUFACTURING TECHNOLOGY

Murgai, M.P., Consultant, Centre for Energy Studies and Research Devi Ahilya Vishwavidyalaya Campus, Khandwa Road Indore, M.P. Chandra, Ram, Deputy Director, Centre for Energy Studies and Research, Devi Ahilya Vishwavidyalaya Campus, Khandwa Road, Indore, M.P.

Ishchuk, Yu.L. , Deputy Director, MASMA. Contents: Overview of Lubricating Greases • Dispersion Medium of Lubricating Greases • Dispersed Phase of Lubricating Grease • Additives and Fillers • Characteristic of Lubricating Grease Production Technology. Its Main Stages and their Significance in Formation of Structure and Properties of Greases • Processing Conditions and Layouts of Grease Manufacturing Plants. Determination of their Capacity • Selection of Equipment for Individual Stages of Lubricating Grease Manufacturing Process. ISBN: 978-81-224-1668-8 Publication Year: 2005 Edition: 1st Reprint: 2011 Pages: 238 Price: 300.00 Hardbound

Contents: Energy Audit for Conservation • Boiler As a Source of Steam or Hot Water • Combustion of Fuels Used in Boilers • End Use of Steam • Identification of Energy Conservation Measures Through Energy Audit of Boiler Assisted Industries • Case Studies on the Energy Audit of Boiler Related Industries. ISBN: 978-81-224-0285-8 Reprint: 2010 Pages: 352

24

Publication Year: 1990 Edition: 1st Price: 350.00 Hardbound

REFERENCE BOOKS

MECHANICAL E NGINEERING

192 PRECISION ENGINEERING IN MANUFACTURING

196 WELDING TECHNOLOGY AND DESIGN Radhakrishnan, V.M., Department of Metallurgical Engineering, Indian Institute of Technology, Chennai, Tamil Nadu

Murty, R.L., Professor, Department of Mechanical Engineering and Head of Production Engineering Regional Engineering College, Warangal, A.P.

Contents: Welding Processes • Welding of Materials and Metallurgical Aspects • Strength and Toughness of Welded Joints • Residual Stresses and Distortion • Fatigue of Welded Joints • High Temperature Properties and Creep of Welded Joints • Design of Tubular Joints, Pipes and Pressure Vessels • Weld Defects, Failure and Welding Codes • Weld Testing and Qualification•Analysis and Design of Welded Joints. ISBN: 978-81-224-1672-5 Publication Year: 2005 Edition: 2nd Reprint: 2013 Pages: 556 Price: 595.00 Hardbound

Contents: Concept of Accuracy • Accuracy of Numerical Control Systems • Tolerances and Fits • Acceptance Tests for Machine Tools • Static Stiffness and its Influence on Machining Accuracy • Inaccuracies Due to Thermal Effects • Influence of Forced Vibrations on Accuracy • Dimensional Wear of Cutting Tools and its Influences on Accuracy. ISBN: 978-81-224-0750-1 Reprint: 2012 Pages: 264

Publication Year: 1996 Edition: 1st Price: 495.00 Hardbound

193 ADVANCES IN SUPERCONDUCTIVITY New Materials, Critical Currents and Devices

197 POWDER METALLURGY Ramakrishnan,P., Professor Emeritus I.I.T., Mumbai Contents: Trends in Powder Metallurgy • Powder Metallurgy for Automotive Industry • Properties of Powder Metallurgical Products • Powder Metallurgy for Electrical/Electronic Industry • Powders, Processing and Applications.

Pinto, R. Malik, S.K. Grover, A.K. Ayyub, P. Contents: New Superconductors and Their Novel Aspects • Critical Currents • Thin Films and Devices • Vortex Structure, Pinning and Dynamics • Theoretical Aspects of High-Tc Superconductors. ISBN: 978-81-224-1125-6 Reprint: 2009 Pages: 422

ISBN: 978-81-224-2030-2 Reprint: 2008 Pages: 396

Publication Year: 1997 Edition: 1st Price: 600.00 Hardbound

MACHINERY DYNAMICS

Rangwala, A.S. Turbo-Machinery Consultant and Ex-Adjunct Professor, Cincinnati State Technical College, USA

Prasad, Krishna Kant, Former Dy. General Manager, R & D Center for Iron & Steel, S.A.I. Ltd., Doranda, Ranchi Ray, H.S., Emeritus Scientist, Central Class and Ceramic Research Institute, Kolkata Abraham, K.P.

Contents: Vibration Theory Fundamentals • Classification and Construction of Reciprocating Machines • The Crankshaft and Associated Components • Crank Mechanism Dynamics • Balancing of Periodic Inertia and Gas Pressure Loads • Torsional Vibrations • Flexural Vibrations • Advanced Analytical Methods • Vibration Measurement and Balancing • Applications from Computational Fluid Dynamics • Pressure Pulsations in Compressors and Pumps • Reciprocating Machinery Dynamics and Noise • Design Optimization.

Contents: Historical Perspective of Thermodynamics • Thermodynamics and Feasibility • Basic Concepts • Zeroeth Law, First Law and Thermochemistry • Second Law • Entropy, Third Law and Feasibility • Solution Thermodynamics • Measurement of Thermodynamic Properties • Statistical Thermodynamics–An Introduction • Reaction Kinetics. Publication Year: 2007 Hardbound

ISBN: 978-81-224-1813-2 Reprint: 2010 Pages: 546

Publication Year: 2006 Edition: 1st Price: 525.00 Hardbound

Edition: 1st

199 TRENDS IN AUTOMOBILE ENGINEERING

195 COMPOSITES

Rangwala, A.S. Turbo-Machinery Consultant and Ex-Adjunct Professor Cincinnati State Technical College, USA

Science and Technology Prasad, R.C., Department of Metallurgical Engineering, Indian Institute of Technology, Powai, Mumbai Ramkrishnan, P., Professor Emeritus I.I.T., Mumbai Contents: General • Fabrication, Development and Analysis • Structure and Properties Environmental • Effects. ISBN: 978-81-224-1251-2 Reprint: 2009 Pages: 220

Publication Year: 2007 Edition: 1st Price: 495.00 Hardbound

198 RECIPROCATING

194 CHEMICAL AND METALLURGICAL THERMODYNAMICS

ISBN: 978-81-224-1978-8 Pages: 110 Price: 295.00

BACK LIST

Contents: Advanced Automobile Technology • Engine Design and Operation • Engine Components • Engine Starting • Fuel Supply and Injection • Ignition System • Exhaust System • Emission Controls • Turbo-charger and Supercharger • Electrical Charging Process • Lubrication Methods • Cooling Techniques • Electronic Control Unit and Onboard Diagnostics • Clutch Mechanism • Manual Transmission • Automatic Transmission • Rear-Drive Axle and Differential • Front Drive and Transaxle • Four-Wheel Drive • Tire, Wheel and Wheel Balancing • Brakes, Traction, and Stability Control • Suspension • Steering Mechanism • Wheel Alignment.

Publication Year: 2000 Edition: 1st Price: 350.00 Hardbound

ISBN: 978-81-224-1994-8 Reprint: 2009 Pages: 452

25

Publication Year: 2007 Edition: 1st Price: 495.00 Hardbound

REFERENCE BOOKS

MECHANICAL E NGINEERING

200 TURBOMACHINE BLADE VIBRATION

203 ROTOR DYNAMICS Rao, J.S., Professor Department of Mechanical Engineering, Indian Institute of Technology, New Delhi

Rao, J.S., Prof. Deptt. of Mechanical Engineering, Indian Institute of Technology, New Delhi, India

Contents: Introduction • Torsional Vibrations in Rotating Machinery • Torsional Vibrations in Reciprocating Machinery • Bending Critical Speeds of Simple Shafts • Out-of-Balance Response of Rotors in Rigid Supports • Gyroscopic Effects • Hydrodynamic Bearings • Rotors Mounted on Fluid Film Bearings • Shafts with Dissimilar Moments of Area • Instability due to Fluid Film Forces and Hysteresis • Instability in Torsional Vibration. ISBN: 978-81-224-0977-2 Publication Year: 1996 Edition: 3rd Reprint: 2011 Pages: 448 Price: 700.00 Hardbound

Contents: Introduction • Single Blade Vibrations • Discrete Analysis of Blades • Small Aspects Ratio Blades • Blade Group Frequencies and Mode Shapes • Excitation • Damping • Forced Vibrations • Transient Vibrations • Coupled Blade Disc Vibrations • Some thoughts on Fatigue Life Estimation • Some Reflections. ISBN: 978-81-224-0304-6 Publication Year: 1991 Edition: 1st Reprint: 2010 Pages: 458 Price: 750.00 Hardbound

204 PUMPS

201 TURBOMACHINE UNSTEADY AERODYNAMICS

Sahu, G.K., Former AGM, Deptt. of Design and Project Engg., Rourkela Steel Plant, Rourkela, Orissa

Rao, J.S., Prof. Deptt. of Mechanical Engineering, Indian Institute of Technology, New Delhi, India

Contents: Part I: General Information on Fluid Flow and Pumps: Fundamentals of Fluid Flow • Pumps • Basic Theories of Centrifugal Pumps • Factors Affecting Pump Operation. Part II: Design and Construction: Design of Radial Flow Pumps • Design of Francis Type and Mixed Flow Impellers • Design of Axial Flow Impellers • Other Aspects of Centrifugal Pump Design • Pumps Drives • Positive Displacement Pumps

Contents: Introduction • Basic Principles of Inviscid Incompressible Flows • Elementary Incompressible Flows • Airfoil Theory by Mapping arid Using Flow Field over a Circular Cylinder • Two-Dimensional Thin Airfoil Theory • Airfoil in Unsteady Flow • Unsteady Aerodynamics of a Thin 2-0 Blade Stage in Incompressible Flow • Inviscid Compressible Flow • Subsonic Compressible Flow in 2-0 Thin Airfoil Stage • Hydraulic Analogy • Introduction to Viscous Flow and Boundary Layers • Unsteady Lift and Moment Due to Viscons Weaks. ISBN: 978-81-224-0653-5 Reprint: 2006 Pages: 532

• Special Purpose Pumps. ISBN: 978-81-224-1224-6 Reprint: 2008 Pages: 320

Publication Year: 1994 Edition: 1st Price: 750.00 Hardbound

Publication Year: 2000 Edition: 1st Price: 495.00 Hardbound

205 PRINCIPLES OF HEAT TREATMENT OF STEELS Sharma, R.C., Hon. Director/Acharya, Jnana Pravaha, Centre for Cultural Studies, Varanasi, U.P.

202 ADVANCED THEORY OF VIBRATION

Contents: Transformations in Plain Carbon Steels • Alloying Elements in Steels-I (Effect on Phase Equilibria) • Alloying Elements in Steels-II (Effect on Phase Transformations)• StructureProperty Relationships • Tempering of Martensite • Continuous Cooling Transformation (CCT) Diagrams • Formation of Austenite • Annealing and Normalizing • Hardenability of Steels-I (Concepts and Characterization) Hardenability of Steels-II (Correlation With Composition) • Carburizing and Carbonitriding • Nitriding of Steels • Induction and Flame Hardening • Miscellaneous Thermal and Thermo-Mechanical Treatments.

Rao, J.S., Professor Department of Mechanical Engineering, Indian Institute of Technology, New Delhi Contents: Introduction • Nonlinear Vibration of Simple Systems• Stability Considerations • Forced Oscillations of Nonlinear Systems • Variational Principles • Longitudinal Vibration of Bars • Torsional Vibration of Rods • Lateral Vibration of Beams. ISBN: 978-81-224-0442-5 Reprint: 2008 Pages : 442

BACK LIST

Publication Year: 1992 Edition: 1st Price: 450.00 Hardbound

ISBN: 978-81-224-0869-0 Reprint: 2007 Pages: 340

Publication Year: 1996 Edition:1st Price: 595.00 Hardbound

WIND ENGINEERING SERIES 206

ISBN : 978-81-224-0714-3 Pages: 562 Price: ` 695.00

207

208

209

210

ISBN : 978-81-224-0715-0 Pages: 540 Price: ` 695.00

ISBN : 978-81-224-0716-7 Pages: 546 Price: ` 695.00

ISBN : 978-81-224-0717-4 Pages: 694 Price: ` 695.00

ISBN : 978-81-224-1051-8 Pages: 200 Price: ` 395.00

26

211

ISBN : 978-81-224-0718-1 Pages: 432 Price: ` 695.00

ENGINEERING COMMON TITLES 212

213

214

215

ISBN : 978-81-224-3358-6 Pages: 970 Price: ` 499.00

ISBN : 978-81-224-1345-8 Pages: 486 Price: ` 185.00

ISBN : 978-81-224-1689-3 Pages: 932 Price: ` 395.00

ISBN : 978-81-224-2597-0 Pages: 636 Price: ` 495.00

216

ISBN : 978-81-224-2598-7 Pages: 342 Price: ` 395.00

217

ISBN : 978-81-224-2160-6 Pages: 140 Price: ` 90.00

218

219

220

221

222

ISBN : 978-81-224-2252-8 Pages: 324 Price: ` 160.00

ISBN : 978-81-224-2281-8 Pages: 568 Price: ` 260.00

ISBN : 978-81-224-0380-0 Pages: 640 Price: ` 295.00

ISBN : 978-81-224-3381-4 Pages: 452 Price: ` 299.00

ISBN : 978-81-224-3085-1 Pages: 904 Price: ` 450.00

224

225

226

227

ISBN : 978-81-224-3357-9 Pages: 552 Price: ` 395.00

ISBN : 978-81-224-3140-7 Pages: 576 Price: ` 275.00

ISBN : 978-81-224-1818-7 Pages: 354 Price: ` 250.00

223 NEW AGE

SECOND EDITION

ISBN : 978-81-224-3383-8 Pages: 378 Price: ` 499.00

NEW AGE

THIRD EDITION

ISBN : 978-81-224-3354-8 Pages: 320 Price: ` 225.00

228

229

230

231

232

ISBN : 978-81-224-1540-7 Pages: 262 Price: ` 100.00

ISBN : 978-81-224-1831-6 Pages: 492 Price: ` 299.00

ISBN : 978-81-224-1909-2 Pages: 336 Price: ` 195.00

ISBN : 978-81-224-0992-5 Pages: 292 Price: ` 250.00

ISBN : 978-81-224-2134-7 Pages: 424 Price: ` 495.00

MANAGEMENT TITLES (FOR ENGINEERING) 233

234

235

236

237

238

ISBN : 978-81-224-2587-1 Pages: 290 Price: ` 175.00

ISBN : 978-81-224-3015-8 Pages: 952 Price: ` 475.00

ISBN : 978-81-224-2740-0 Pages: 440 Price: ` 250.00

ISBN : 978-81-224-3191-9 Pages: 170 Price: ` 150.00

ISBN : 978-81-224-2582-6 Pages: 110 Price: ` 75.00

ISBN : 978-81-224-2720-2 Pages: 364 Price: ` 290.00

27

MANAGEMENT TITLES (FOR ENGINEERING) 239

240

241

242

243

244

ISBN : 978-81-224-2835-3 Pages: 520 Price: ` 295.00

ISBN : 978-81-224-3100-1 Pages: 344 Price: ` 250.00

ISBN : 978-81-224-3329-6 Pages: 710 Price: ` 350.00

ISBN : 978-81-224-3039-4 Pages: 290 Price: ` 200.00

ISBN : 978-81-224-3078-3 Pages: 704 Price: ` 375.00

ISBN : 978-81-224-3043-1 Pages: 408 Price: ` 250.00

245

246

247

248

249

250

ISBN : 978-81-224-2602-1 Pages: 196 Price: ` 150.00

ISBN : 978-81-224-3102-5 Pages: 224 Price: ` 250.00

ISBN : 978-81-224-1549-0 Pages: 312 Price: ` 145.00

ISBN : 978-81-224-3320-3 Pages: 458 Price: ` 275.00

ISBN : 978-81-224-1609-1 Pages: 736 Price: ` 290.00

ISBN : 978-81-224-2033-3 Pages: 266 Price: ` 150.00

UNIVERSITY WISE TITLES ANNA UNIVERSITY (TAMIL NADU)

GTU (GUJRAT)

251

252

253

254

255

256

ISBN : 978-81-224-2610-6 Pages: 328 Price: ` 195.00

ISBN : 978-81-224-3052-3 Pages: 660 Price: ` 295.00

ISBN : 978-81-224-1938-2 Pages: 184 Price: ` 95.00

ISBN : 978-81-224-1863-7 Pages: 262 Price: ` 175.00

ISBN : 978-81-224-2015-9 Pages: 496 Price: ` 200.00

ISBN : 978-81-224-2766-0 Pages: 388 Price: ` 150.00

VTU (KARNATAKA)

PUNE UNIVERSITY

RGPV (BHOPAL)

257

258

259

260

261

262

ISBN : 978-81-224-3164-3 Pages: 534 Price: ` 255.00

ISBN : 978-81-224-3003-5 Pages: 268 Price: ` 150.00

ISBN : 978-81-224-3162-9 Pages: 340 Price: ` 175.00

ISBN : 978-81-224-3252-7 Pages: 416 Price: ` 200.00

ISBN : 978-81-224-2762-2 Pages: 332 Price: ` 150.00

ISBN : 978-81-224-2763-9 Pages: 200 Price: ` 100.00

263

264

265

266

267

268

ISBN : 978-81-224-2788-2 Pages: 420 Price: ` 200.00

ISBN : 978-81-224-3377-7 Pages: 416 Price: ` 199.00

ISBN : 978-81-224-2816-2 Pages: 424 Price: ` 205.00

ISBN : 978-81-224-3190-2 Pages: 478 Price: ` 250.00

ISBN : 978-81-224-2787-5 Pages: 660 Price: ` 300.00

ISBN : 978-81-224-2458-4 Pages: 300 Price: ` 175.00

JNTU (ANDHRA PRADESH)

28

JNTU (ANDHRA PRADESH) 269

ISBN : 978-81-224-1849-1 Pages: 414 Price: ` 195.00

270

ISBN : 978-81-224-2034-0 Pages: 224 Price: ` 100.00

271

272

273

274

ISBN : 978-81-224-1349-6 Pages: 540 Price: ` 195.00

ISBN : 978-81-224-1807-1 Pages: 642 Price: ` 295.00

ISBN : 978-81-224-1924-5 Pages: 490 Price: ` 250.00

ISBN : 978-81-224-1945-0 Pages: 700 Price: ` 295.00

UPTU (UTTAR PRADESH) 275

276

277

278

279

280

ISBN : 978-81-224-3425-5 Pages: 168 Price: ` 85.00

ISBN : 978-81-224-3001-1 Pages: 300 Price: ` 150.00

ISBN : 978-81-224-3327-2 Pages: 268 Price: ` 180.00

ISBN : 978-81-224-2735-6 Pages: 196 Price: ` 125.00

ISBN : 978-81-224-3217-6 Pages: 424 Price: ` 200.00

ISBN : 978-81-224-3371-5 Pages: 362 Price: ` 195.00

281

282

283

284

285

286

ISBN : 978-81-224-2760-8 Pages: 454 Price: ` 250.00

ISBN : 978-81-224-3443-9 Pages: 184 Price: ` 100.00

ISBN : 978-81-224-3446-6 Pages: 188 Price: ` 125.00

ISBN : 978-81-224-2681-6 Pages: 292 Price: ` 175.00

ISBN : 978-81-224-3054-7 Pages: 400 Price: ` 175.00

ISBN : 978-81-224-1665-7 Pages: 452 Price: ` 175.00

WBUT/WBSCTE (WEST BENGAL) 287

288

289

290

291

292

ISBN : 978-81-224-2694-6 Pages: 416 Price: ` 200.00

ISBN : 978-81-224-3395-1 Pages: 440 Price: ` 200.00

ISBN : 978-81-224-3219-0 Pages: 420 Price: ` 200.00

ISBN : 978-81-224-2053-1 Pages: 56 Price: ` 50.00

ISBN : 978-81-224-1967-2 Pages: 112 Price: ` 50.00

ISBN : 978-81-224-2054-8 Pages: 108 Price: ` 50.00

293

294

295

296

297

298

ISBN : 978-81-224-3214-5 Pages: 670 Price: ` 295.00

ISBN : 978-81-224-3447-7 Pages: 680 Price: ` 299.00

ISBN : 978-81-224-3406-4 Pages:342 Price: ` 175.00

ISBN : 978-81-224-3256-5 Pages:408 Price: ` 250.00

ISBN : 978-81-224-2186-6 Pages: 100 Price: ` 50.00

ISBN : 978-81-224-2198-9 Pages: 100 Price: ` 48.00

MECHANICS

29

PUBLISHERS WISE TITLES AMERICAN SOCIETY FOR QUALITY 299

300

301

302

303

304

ISBN : 978-81-224-3115-5 Pages: 220 Price: ` 395.00

ISBN : 978-81-224-2792-9 Pages: 320 Price: ` 495.00

ISBN : 978-81-224-2790-5 Pages: 232 Price: ` 495.00

ISBN : 978-81-224-3117-9 Pages: 672 Price: ` 699.00

ISBN : 978-81-224-2801-8 Pages: 296 Price: ` 395.00

ISBN : 978-81-224-3110-0 Pages: 500 Price: ` 495.00

305

306

307

308

309

310

ISBN : 978-81-224-3116-2 Pages: 280 Price: ` 399.00

ISBN : 978-81-224-2789-9 Pages: 560 Price: ` 695.00

ISBN : 978-81-224-3103-2 Pages: 454 Price: ` 399.00

ISBN : 978-81-224-2802-5 Pages: 144 Price: ` 50.00

ISBN : 978-81-224-3112-4 Pages: 124 Price: ` 150.00

ISBN : 978-81-224-3114-8 Pages: 384 Price: ` 495.00

312

313

314

315

316

ISBN : 978-81-224-3109-4 Pages: 362 Price: ` 395.00

ISBN : 978-81-224-2794-3 Pages: 696 Price: ` 795.00

ISBN : 978-81-224-3106-3 Pages: 416 Price: ` 495.00

ISBN : 978-81-224-3108-7 Pages: 130 Price: ` 150.00

ISBN : 978-81-224-3107-0 Pages: 375 Price: ` 399.00

NELSON THORNES

SPIE TITLES

311

ISBN : 978-81-224-3105-6 Pages: 122 Price: ` 150.00

PRINCETON UNIVERSITY PRESS REPRINTS 317

318

319

320

321

322

ISBN : 978-81-224-3128-5 Pages: 380 Price: ` 399.00

ISBN : 978-81-224-3132-2 Pages: 688 Price: ` 595.00

ISBN : 978-81-224-3135-3 Pages: 562 Price: ` 495.00

ISBN : 978-81-224-3139-1 Pages: 204 Price: ` 395.00

ISBN : 978-0-7487-8082-2 Pages: 534 Price: ` 425.00

ISBN : 978-81-224-2833-9 Pages: 636 Price: ` 795.00

323

324

325

326

327

328

ISBN : 978-81-8128-859-2 Pages: 552 Price: ` 895.00

ISBN : 978-81-8489-425-7 Pages: 690 Price: ` 550.00

ISBN : 978-81-8489-508-7 Pages: 166 Price: ` 399.00

ISBN : 978-81-8489-407-3 Pages: 482 Price: ` 599.00

ISBN : 978-81-8489-554-4 Pages: 350 Price: ` 399.00

ISBN : 978-81-8489-561-2 Pages: 706 Price: ` 790.00

SPRINGER VERLAG

30

SPRINGER VERLAG 329

330

331

332

333

334

ISBN : 978-81-8128-806-6 Pages: 840 Price: ` 950.00

ISBN : 978-81-8128-438-9 Pages: 516 Price: ` 595.00

ISBN : 978-81-8128-629-1 Pages: 598 Price: ` 795.00

ISBN : 978-81-8128-509-6 Pages: 272 Price: ` 495.00

ISBN : 978-81-8128-505-8 Pages: 492 Price: ` 795.00

ISBN : 978-81-8128-559-1 Pages: 428 Price: ` 995.00

335

336

337

338

339

340

ISBN : 978-81-8489-399-1 Pages: 332 Price: ` 499.00

ISBN : 978-81-8128-547-8 Pages: 480 Price: ` 495.00

ISBN : 978-81-8128-676-5 Pages: 490 Price: ` 495.00

ISBN : 978-81-8489-205-5 Pages: 562 Price: ` 795.00

341

342

343

344

345

346

ISBN : 978-81-8489-320-5 Pages: 206 Price: ` 399.00

ISBN : 978-81-8128-677-2 Pages: 442 Price: ` 795.00

ISBN : 978-81-8489-127-0 Pages: 506 Price: ` 950.00

ISBN : 978-81-8128-609-3 Pages: 222 Price: ` 495.00

ISBN : 978-81-8489-429-5 Pages: 350 Price: ` 499.00

ISBN : 978-81-8128-801-1 Pages: 216 Price: ` 390.00

347

348

349

350

351

352

ISBN : 978-1-84628-055-9 Pages: 496 Price: ` 770.00

ISBN : 978-81-8489-122-5 Pages: 586 Price: ` 975.00

ISBN : 978-81-8489-231-4 Pages: 284 Price: ` 495.00

ISBN : 978-81-8489-232-1 Pages: 232 Price: ` 495.00

ISBN : 978-81-8489-280-2 Pages: 174 Price: ` 395.00

ISBN : 978-81-8128-657-4 Pages: 662 Price: ` 995.00

353

354

355

356

357

358

ISBN : 978-81-8128-804-2 Pages: 356 Price: ` 360.00

ISBN : 978-81-8128-555-3 Pages: 520 Price: ` 995.00

ISBN : 978-81-8489-029-7 Pages: 392 Price: ` 595.00

ISBN : 978-81-8489-134-8 Pages: 668 Price: ` 990.00

ISBN : 978-81-8489-236-9 Pages: 640 Price: ` 999.00

ISBN : 978-81-8128-692-5 Pages: 473 Price: ` 795.00

31

ISBN : 978-81-8489-021-1 Pages: 1066 Price: ` 1500.00

ISBN : 978-81-8489-553-7 Pages: 588 Price: ` 695.00

STUDY ABROAD INTERNATIONAL BEST SELLING TITLES 359

360

361

362

363

364

ISBN : 978-81-224-3153-7 Pages: 420 Price: ` 395.00

ISBN : 978-81-224-3346-3 Pages: 452 Price: ` 399.00

ISBN : 978-81-224-3402-6 Pages: 368 Price: ` 299.00

ISBN : 978-81-224-1744-9 Pages: 146 Price: ` 195.00

ISBN : 978-81-224-2121-7 Pages: 226 Price: ` 295.00

ISBN : 978-81-224-2166-8 Pages: 170 Price: ` 245.00

365

366

367

368

369

370

ISBN : 978-81-224-2261-0 Pages: 668 Price: ` 475.00

ISBN : 978-81-224-2045-6 Pages: 592 Price: ` 295.00

ISBN : 978-81-224-3151-3 Pages: 320 Price: ` 250.00

ISBN : 978-81-224-1733-3 Pages: 708 Price: ` 695.00

ISBN : 978-81-224-2071-5 Pages: 390 Price: ` 495.00

ISBN : 978-81-224-2806-3 Pages: 312 Price: ` 395.00

371

372

373

374

ISBN : 978-81-224-1650-3 Pages: 272 Price: ` 95.00

ISBN : 978-81-224-2205-4 Pages: 400 Price: ` 195.00

ISBN : 978-81-224-1786-9 Pages: 100 Price: ` 95.00

378

379

380

ISBN : 978-81-224-1652-7 Pages: 424 Price: ` 145.00

ISBN : 978-81-224-1651-0 Pages: 396 Price: ` 245.00

ISBN : 978-81-224-1812-5 Pages: 320 Price: ` 195.00

384

385

386

ISBN : 978-81-224-1770-8 Pages: 376 Price: ` 175.00

ISBN : 978-81-224-1580-3 Pages: 496 Price: ` 245.00

ISBN : 978-81-224-1663-3 Pages: 256 Price: ` 125.00

ISBN : 978-81-224-3150-6 Pages: 280 Price: ` 195.00

377

ISBN : 978-81-224-3400-2 Pages: 518 Price: ` 399.00

383

ISBN : 978-81-224-2132-3 Pages: 672 Price: ` 295.00

32

375

ISBN : 978-81-224-1746-3 Pages: 152 Price: ` 125.00

381

ISBN : 978-81-224-3401-9 Pages: 312 Price: ` 299.00

387

ISBN : 978-81-224-1635-0 Pages: 210 Price: ` 125.00

376

ISBN : 978-81-224-3200-8 Pages: 384 Price: ` 299.00

382

ISBN : 978-81-224-2010-4 Pages: 210 Price: ` 495.00

388

ISBN : 978-81-224-1657-2 Pages: 176 Price: ` 120.00

NEW AGE INTERNATIONAL (P) LIMITED, PUBLISHERS Established in 1966, New Age International is among the world’s leading publishers of educational textbooks and reference books. It has published 2000+ titles in various disciplines of Science and Technology, Management and Commerce, Medical Sciences, Social Sciences and Humanities. Authored by eminent academics and professionals from Indian Institute of Technology and Indian Institute of Management and other internationally-renowned institutions, these titles are being profitably used by a wide spectrum of teachers and students. New Age International has three offices in New Delhi and eight branch offices in the metropolitan cities of India. It also has a number of accounts with other distributors, stockists and retailers. The promotion, marketing and distribution activities of the company are performed by the branches in conjunction with their local dealers. The editorial and the production units are located at the Head Office in New Delhi. New Age International publishes around 125 new titles/editions each year. Titles are taken up for publication only after its contents have been evaluated by a panel of editorial and subject experts. The organisation emphasises quality norms in terms of both editorial content and physical inputs like paper, printing and binding. The focus of the company is on providing authentic, reliable and user-friendly books at affordable prices.

Complimentary copies of books in this catalogue are available on formal request by the teachers who wish to consider these for possible course adoption. To request for a complimentary copy, please write to our head office only. Please include your position, the course title and approximate enrolment, text currently in use. Complimentary copies will not be sent without this information. It is also necessary to send the syllabus of your university for the course, you are requesting a specimen copy.

All prices are subject to change without prior notice. Prices are indicated in Indian th

Rupees. This Price List is up-to-date as on 15 January 2012. For further information;

Please visit us our website www.newagepublishers.com

Attention

Authors !

We have 1.

A team of dedicated editors and production specialists to ensure that your book has the features which are essential for maximum sale of your book.

2.

An infrastructure for marketing to reach every nook and corner of the world.

3.

Dedicated team of marketing executives to constantly remain in touch with educational and research institutions as well as the book trade.

4.

Twelve branch offices throughout the country to ensure that New Age Publications are available with booksellers and institutional libraries at every possible place.

5.

Up-to-date website www.newagepublishers.com to provide details of New Age Publications and its in-built feature to record e-mail and instantly provide information of our new publications on the subject of one’s choice. Thus, facilitating penetration of the world market.

Proposals may be sent to: Academic Director

NEW AGE INTERNATIONAL (P) LTD., PUBLISHERS HEAD OFFICE 7/30 A, Daryaganj, New Delhi-110 002 (INDIA) Tel.: (011) 23253771, 23253472 • Fax: 23267437 E-mail: [email protected]

MECHANICAL ENGINEERING LU C

DELHI

KN

OW

GUWAHATI

22, Golden House, Daryaganj, New Delhi-110 002 Tel.: (011) 23262370, 23262368 Telefax: 43551305 E-mail: [email protected]

16-A, Jopling Road, Lucknow-226 001 Tel.: (0522) 2209578, 4045297 Telefax : 2204098 E-mail: [email protected]

A AT LK O K Hemsen Complex, Mohd. Shah Road, Paltan Bazar, Near Starline Hotel, Guwahati-781 008 Tel.: (0361) 2513881, Telefax: 2543669 E-mail: [email protected]

MUMBAI HYDERABAD

142C, Victor House, Ground Floor, N.M. Joshi Marg, Lower Parel, Mumbai- 400 013 Tel.: (022) 24927869 Telefax: 24915415 E-mail: [email protected]

RDB Chambers (Formerly Lotus Cinema)106A, 1st Floor, S.N. Banerjee Road, Kolkata-700 014 Tel.: (033) 22273773, Telefax : 22275247 E-mail: [email protected]

BANGALORE 37/10, 8th Cross (Near Hanuman Temple), Azad Nagar, Chamarajpet, Bangalore-560 018, Tel.: (080) 26756823 Telefax: 26756820, E-mail: [email protected]

CC-39/1016, Carrier Station Road, Ernakulam South, Cochin-682 016, Tel.: (0484) 2377004 Telefax: 4051303 E-mail:[email protected]

AI

N EN

CH

COCHIN

105, 1st Floor, Madhiray Kaveri Tower, 3-2-19, Azam Jahi Road, Nimboliadda, Hyderabad-500 027 Tel.: (040) 24652456, Telefax: 24652457 E-mail: [email protected]

26, Damodaran Street, T. Nagar, Chennai-600 017, Tel.: (044) 24353401 Telefax : 24351463 E-mail: [email protected]

Visit us at www.newagepublishers.com Branches: New Delhi • Bangalore • Chennai • Cochin • Guwahati • Hyderabad • Kolkata • Lucknow • Mumbai

NEW AGE INTERNATIONAL PUBLISHERS