No amount of guilt can solve the past, and no amount of anxiety can change the future. Anonymous
Idea Transcript
T
ONYX HD
Application Procedures for exterior Products
ONYX HD Toners 851 Prep and Wash 900 Pre-Kleano 909 Final Wipe AM900 Aero-Max Pre-Kleano HB002 Hydrobase HB004 Hydrobase Slow (Not for California) HB005 Hydrobase Slow (For California only)
Cleaning Pretreatments Color Mixing Ratio
HB020 Hydromix HB040 Hydromix Slow HB055 Onyx Blender Pro HB100 Mixing Clear All R-M Clears All R-M Undercoats
See Topcoat Section - “Cleaning & Preparing Vehicle for Topcoating” for vehicle prep. See Undercoat Section Mix color with Hydrobase and HB100 as per formula. 100% ONYX HD Color 60-80% Hydromix It is important to follow these steps during the preparation of ONYX HD: • Prepare the ONYX HD Color • Stir well until uniform • Add Hydromix • Stir well until uniform Strain before application.
Application
2 medium wet coats (to hiding) + 1 mist coat for metallic / effect colors 5 minutes flash between coats and before clearcoat until matte. The use of air jets will reduce flash-off time of the ONYX HD paint.
Drying Sanding/ Polishing Notes
20°C/68°F
15 minutes under ventilation
See Topcoat Section - “Cleaning & Preparing Vehicle for Topcoating” for vehicle prep.
Intermix formula must contain Hydrobase. Please observe the following shelf life recommendations: HB002 - 12 months HB004 - 12 months HB005 - 12 months HB020 - 12 months
ONYX HD colors mixed to formula: 6 months in a sealed plastic container. ONYX HD ready for use: 1 week in a sealed plastic container. For underhood solution, please see SmartTRAK/SmartCOLOR. US Rev. 7/25/14
T
ONYX HD
Exterior Technical Data Characteristics
Things to DO:
The R-M ONYX HD Waterborne is an advanced water-based topcoat that provides all the drying advantages of a solvent based product while having the environmentally safe properties of a water-base topcoat. ONYX HD uses 80% less solvent when compared to conventional basecoats and has a ready for use VOC of 3.5 lbs/gal or less. Has OEM approval and is good for multi-colors and solid colors.
• Do use the appropriate NIOSH/MSHA respirator. Consult product label for details. • Do use HB055 Onyx Blender Pro to melt in ONYX HD Color when completing a color blend. • Do measure amount of hardener and reducer DO NOT ESTIMATE. • Do use ONYX HD toner mixture with hardener within 90 minutes for best results. • Do shake new tinting bases for 15 minutes on a mechanical paint shaker before placing on a mixing machine.
Technical Data Viscosity 21-26 sec. #4 Ford cup Fluid Tip (HE Gravity) 1.3-1.5 mm Fluid Tip (HVLP Gravity) 1.3-1.5 mm Air Pressure (HVLP/HE) 8-10 psi at air cap Number of Coats 2+ coats Thickness 0.5-1.0 mil Pot Life 6 months (in plastic or lined containers)
• Do agitate tinting bases on a mixing machine at the start of the work day for 15 minutes and every 4 hours throughout the day to ensure good color matching. • Do keep the following products from freezing: HB002 Hydrobase, HB004 Hydrobase Slow (not for California), HB005 Hydrobase Slow (for California only), HB020 Hydromix, HB040 Hydromix Slow, HB055 Onyx Blender Pro and HB100 Mixing Clear. • Do use plastic or lined cans for storage of ONYX HD paint. • ONYX HD colors mixed to formula may be stored for six months in a sealed plastic container. ONYX HD ready for use may be stored for one week in a sealed plastic container.
Coverage 230 sq ft/gal @ 1.0 mil VOC as Applied 420 gms/ltr (3.5 lbs/gal)
Things NOT to DO: • Do not use if the shop temperature is below 15°C/60°F. • Do not use any reducers other than HB020 Hydromix or HB040 Hydromix Slow.
Materials described are for application by professional trained personnel only using proper equipment. Products may be hazardous and should be used according to label directions and technical data information. Appropriate respiratory protection should be worn at all times while products are in use - read product label and Material Safety Data Sheet (MSDS) for specific details. Statements and methods described are based upon the latest standard of technology known to the manufacturer. Application procedures cited are suggestions only and are not to be interpreted as warranty for events resulting from their use. Dilution ratios are intended to provide maximum performance within the typical Volatile Organic Compound (VOC) restriction for product use. Specific VOC limits need to be referenced to verify local compliance. Altering the solvent or dilution ratio may impact VOC compliance. User is solely responsible to ensure product use and application is in accordance with all applicable regulatory, legislative, and municipal requirements.
T
ONYX HD
Application Procedures for exterior This method is necessary for OEM warranty work. Products
ONYX HD Toners 851 Prep and Wash 900 Pre-Kleano 909 Final Wipe AM900 Aero-Max Pre-Kleano BCH10 Basecoat Hardener HB002 Hydrobase HB004 Hydrobase Slow (Not for California)
Cleaning Pretreatments Color Mixing Ratio
HB005 Hydrobase Slow (For California only) HB020 Hydromix HB040 Hydromix Slow HB055 Onyx Blender Pro HB100 Mixing Clear All R-M Clears All R-M Undercoats
See Topcoat Section - “Cleaning & Preparing Vehicle for Topcoating” for vehicle prep. See Undercoat Section Mix color with Hydrobase and HB100 as per formula. 100% ONYX HD Color 80% Hydromix * 5% BCH10 It is important to follow these steps during the preparation of ONYX HD: • Prepare the ONYX HD Color • Stir well until uniform • Add Hydromix • Stir well until uniform • Add BCH10 Basecoat Hardener • Stir well until uniform Strain before application.
Application
2 medium wet coats (to hiding) + 1 mist coat for metallic / effect colors 5 minutes flash between coats and before clearcoat until matte. The use of air jets will reduce flash-off time of the ONYX HD paint.
Drying Sanding/ Polishing Notes
20°C/68°F
15 minutes under ventilation
See Topcoat Section - “Cleaning & Preparing Vehicle for Topcoating” for vehicle prep. Intermix formula must contain Hydrobase. Please observe the following shelf life recommendations: HB040 - 12 months HB002 - 12 months HB004 - 12 months HB055 - 12 months HB005 - 12 months HB100 - 12 months HB020 - 12 months ONYX HD colors mixed to formula: 6 months in a sealed plastic container. ONYX HD ready for use: 1 week in a sealed plastic container. For underhood solution, please see SmartTRAK/SmartCOLOR.
US Rev. 7/25/14
T
ONYX HD
Exterior Technical Data This method is necessary for OEM warranty work.
Characteristics
Things to DO:
The R-M ONYX HD Waterborne is an advanced water-based topcoat that provides all the drying advantages of a solvent based product while having the environmentally safe properties of a water-base topcoat. ONYX HD uses 80% less solvent when compared to conventional basecoats and has a ready for use VOC of 3.5 lbs/gal or less. Has OEM approval and is good for multi-colors and solid colors.
• Do use the appropriate NIOSH/MSHA respirator. Consult product label for details. • Do use HB055 Onyx Blender Pro to melt in ONYX HD Color when completing a color blend. • Do measure amount of hardener and reducer DO NOT ESTIMATE. • Do use ONYX HD toner mixture with hardener within 90 minutes for best results. • Do shake new tinting bases for 15 minutes on a mechanical paint shaker before placing on a mixing machine.
Technical Data Viscosity 21-26 sec. #4 Ford cup Fluid Tip (HE Gravity) 1.3-1.5 mm Fluid Tip (HVLP Gravity) 1.3-1.5 mm Air Pressure (HVLP/HE) 8-10 psi at air cap Number of Coats 2+ coats Thickness 0.5-1.0 mil Pot Life 6 months (in plastic or lined containers) Pot Life using 5% BCH10 90 minutes Coverage 230 sq ft/gal @ 1.0 mil VOC as Applied 420 gms/ltr (3.5 lbs/gal)
• Do agitate tinting bases on a mixing machine at the start of the work day for 15 minutes and every 4 hours throughout the day to ensure good color matching. • Do keep the following products from freezing: HB002 Hydrobase, HB004 Hydrobase Slow (not for California), HB005 Hydrobase Slow (for California only), HB020 Hydromix, HB040 Hydromix Slow, HB055 Onyx Blender Pro and HB100 Mixing Clear. • Do use plastic or lined cans for storage of ONYX HD paint. • ONYX HD colors mixed to formula may be stored for six months in a sealed plastic container. ONYX HD ready for use may be stored for one week in a sealed plastic container.
Things NOT to DO: • Do not use if the shop temperature is below 15°C/60°F. • Do not use any hardeners other than BCH10 or reducers other than HB020 Hydromix or HB040 Hydromix Slow.
Materials described are for application by professional trained personnel only using proper equipment. Products may be hazardous and should be used according to label directions and technical data information. Appropriate respiratory protection should be worn at all times while products are in use - read product label and Material Safety Data Sheet (MSDS) for specific details. Statements and methods described are based upon the latest standard of technology known to the manufacturer. Application procedures cited are suggestions only and are not to be interpreted as warranty for events resulting from their use. Dilution ratios are intended to provide maximum performance within the typical Volatile Organic Compound (VOC) restriction for product use. Specific VOC limits need to be referenced to verify local compliance. Altering the solvent or dilution ratio may impact VOC compliance. User is solely responsible to ensure product use and application is in accordance with all applicable regulatory, legislative, and municipal requirements.