rural utilities service (rus) - AFL [PDF]

RURAL UTILITIES SERVICE ( RUS ) Listed Products

Founded in 1984, AFL is a global leader providing fiber optic products, equipment, and engineering services to the telecommunications, electric utility, wireless, energy, private network and OEM markets. AFL also serves a diverse mix of industry segments that include service providers, military and defense, mining, oil and gas, and biomedical. AFL brings years of experience in developing solutions for customers, fostering a creative culture to drive and deploy innovative technologies that will improve communications for years to come. Our product line consists of fiber optic cable, transmission and substation accessories, outside plant equipment, connectors, fusion splicers, test equipment and training. AFL’s service portfolio includes market-leading positions with the foremost communications companies supporting inside plant central office, EF&I, outside plant, enterprise and wireless areas. AFL is dedicated to bringing our customers a quality product as well as delivering superior value.

Table of Contents Fiber Optic Cable

Low Smoke Zero Halogen OFN-LS Listed Loose Tube Cable. . . . . . 78 All-Dielectric Armored Rodent-Resistant OSP Loose Tube (LN Series). . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Federal Aviation Administration (FAA) OSP Loose Tube (LG Series). 82 Non-Armored Single Jacket Dry Loose Tube Cable . . . . . . . . . . . . 84 Armored Single Jacket/Single Armor Dry Loose Tube Cable . . . . . . 86

All-Dielectric Self Supporting Cable (AFL-ADSS®) Aerial Drop Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Mini-Span® ADSS Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Flex-Span™ ADSS Fiber Optic Cable. . . . . . . . . . . . . . . . . . . . . . . . 8 All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable. . . . 12 All-Dielectric Self Supporting Cable Accessories Mini-Dead Ends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wedge Dead End. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini-Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini Formed Wire Tangent Support (FTS) . . . . . . . . . . . . . . . . . . Downlead Clamp for ADSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Temporary Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limited Tension Formed Wire Dead End for ADSS Cable . . . . . . . . Medium Tension Dead End for ADSS Cable . . . . . . . . . . . . . . . . . Semi-High Tension Dead End for ADSS Cable. . . . . . . . . . . . . . . . Formed Wire Suspension for ADSS Cable. . . . . . . . . . . . . . . . . . . Trunnion Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spiral Vibration Damper for ADSS or OPGW Cable. . . . . . . . . . . . Fiber Storage Units for ADSS Fiber Optic Cable. . . . . . . . . . . . . . . Drop Cable Storage Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35 36 37 37 38 40 41 42 43 44 45 46 47 48

Indoor / Outdoor Cable Indoor/Outdoor Breakout Cable . . . . . . . . . . . . . . . . . . . . . . . . . Indoor/Outdoor Low Smoke Zero Halogen Breakout Cable. . . . . . Ruggedized Indoor/Outdoor Breakout Cable. . . . . . . . . . . . . . . . Indoor/Outdoor Riser Tight Buffered Cable. . . . . . . . . . . . . . . . . . Indoor/Outdoor Plenum Distribution Cable . . . . . . . . . . . . . . . . . Indoor/Outdoor Multi-unit Riser Tight Buffered Cable. . . . . . . . . . Tactical Tight Buffered Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . Uniflex® Indoor/Outdoor Loose Tube Cable . . . . . . . . . . . . . . . . . Riser Single-Jacket I/O Loose Tube (LV Series SJ). . . . . . . . . . . . . .

49 51 53 55 57 59 61 62 63

IDEAA® Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 LL-400sx Optical Splicing/Distribution Enclosure . . . . . . . . . . . . . . 94 IDEAA® Rack Mount Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . 94 IDEAA® Splice Closure—Sealed . . . . . . . . . . . . . . . . . . . . . . . 95 LightGuard® Sealed Fiber Optic Splice Closures . . . . . . . . . . . . . . 96 Peel & Seal Grommet Systems for Sealed Fiber Optic Closures. . 97 LG-55 Sealed Fiber Optic Splice Closure. . . . . . . . . . . . . . . . . . 98 LG-55-SC Sealed Fiber Optic Splice Closure . . . . . . . . . . . . . . . 99 LG-150 Sealed Fiber Optic Splice Closure . . . . . . . . . . . . . . . 100 LG-250 Sealed Fiber Optic Splice Closure. . . . . . . . . . . . . . . . 101 MuxGuard® 250 Sealed Fiber Optic Splice Closure . . . . . . . . . 102 Thin Film Filter (TFF) Compact Series CWDM . . . . . . . . . . . . . 103 LG-350 Sealed Fiber Optic Splice Closure. . . . . . . . . . . . . . . . 104 LG-350-AC Drop Access Sealed Fiber Optic Splice Closure. . . . 106 LG-350XL Sealed Fiber Optic Splice Closure. . . . . . . . . . . . . . 107 LG-700 Sealed Fiber Optic Splice Closure. . . . . . . . . . . . . . . . 108

65 66 67 68 70 72 74 76

LightGuard® Sealed Splice Closure Accessories. . . . . . . . . . . . . . LightLink Terminal Adapters for Sealed Closures. . . . . . . . . . . . . LightGuard® (LG) Aerial Weathertight Fiber Optic Splice Closures. . . . LG-410 Aerial Weathertight Fiber Optic Splice Closure . . . . . . LG-420 Aerial Weathertight Fiber Optic Splice Closure . . . . . . LG-420 FTTx Aerial Weathertight Closure. . . . . . . . . . . . . . . . LG-500 Aerial Weathertight Fiber Optic Splice Closure . . . . . . LG-500 FTTx Aerial Weathertight Fiber Optic Splice Closures. . LG-600 Aerial Weathertight Fiber Optic Splice Closure . . . . . . LG-600 FTTx Aerial Weathertight Closure. . . . . . . . . . . . . . . .

Outdoor Loose Tube Cable Uniflex® Non-Armored Loose Tube Cable. . . . . . . . . . . . . . . . . . . Uniflex® Armored Loose Tube Cable . . . . . . . . . . . . . . . . . . . . . . Heavy Duty Uniflex® Loose Tube Cable . . . . . . . . . . . . . . . . . . . . Non-Armored OSP Loose Tube (LE Series SJ) . . . . . . . . . . . . . . . . Non-Armored Loose Tube Cable – Double Jacket (LE Series DJ). . . Single-Jacket Single-Armor OSP Loose Tube (LE Series SASJ). . . . . Double-Jacket Single-Armor OSP Loose Tube (LE Series SADJ). . . . Armored Loose Tube Cable – Triple Jacket/Double Armor . . . . . . .

MicroCore® Cable IEC MicroCore® Fiber Optic Cable. . . . . . . . . . . . . . . . . . . . . . . . 88 OSP MicroCore® Telcordia GR-20 Micro-Technology Air-Blown OSP Loose Tube. . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Fiber Outside Plant

Splice Closures and Accessories Integrated Distribution Enabling Access Apparatus (IDEAA)

IDEAA® Exterior Distribution Cabinet. . . . . . . . . . . . . . . . . . . . 92

109 112 113 114 115 116 117 118 119 120

3Q15

i

Table of Contents

(cont.)

Interchangeable Grommets. . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 LightGuard® Aerial Splice Closure Accessories. . . . . . . . . . . . . . 124 LightLink Fiber Optic Splice Trays. . . . . . . . . . . . . . . . . . . . . . . . 126

Optical Interconnect Modules Poli-MOD® Patch and Splice Module. . . . . . . . . . . . . . . . . . . . . 175 XFM® MPO Optical Cassettes. . . . . . . . . . . . . . . . . . . . . . . . . . 177

Splicing and Distribution Enclosures LL-400b Optical Splicing and Distribution Enclosure. . . . . . . . . . . . LL-400s Optical Splicing and Distribution Enclosure. . . . . . . . . . LightLink 500 Optical Splicing and Distribution Enclosure. . . . . . LightLink 580 Optical Splicing and Distribution Enclosure. . . . . . LightLink 24 Slim-Line Pedestal. . . . . . . . . . . . . . . . . . . . . . . . .

Xpress Fiber Management® High Density Products Xpress Fiber Management® High Density Products (XFM®-HD). . 179 XFM®-HD Patch Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 XFM®-HD Optical Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . 182 XFM®-HD Trunk Cable Assemblies. . . . . . . . . . . . . . . . . . . . . 183 Xpress Fiber Management® High Density (XFM®-HD) Patch Cord Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 1RU Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 2RU Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 4RU Patch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 WME-02 with Two LGX® Mounting Positions. . . . . . . . . . . . . . . 189 WME-04 with Four LGX® Mounting Positions . . . . . . . . . . . . . . 191 SNI®-2900 Network Interface Device . . . . . . . . . . . . . . . . . . . . 193 SNI®-730 Network Interface Device . . . . . . . . . . . . . . . . . . . . . 195 SNI®-760 Network Interface Device . . . . . . . . . . . . . . . . . . . . . 197 SNI®-760XL Network Interface Device . . . . . . . . . . . . . . . . . . . 199 SNI®-1100 Network Interface Device . . . . . . . . . . . . . . . . . . . . 201 SNI®-1600 Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Terminal Access TA-230 Demarcation Enclosure . . . . . . . . . . . . . . . . . . . . . . . . 205 SNI®-4300 Network Interface Device . . . . . . . . . . . . . . . . . . . . 206 SNI®-4600 Network Interface Device . . . . . . . . . . . . . . . . . . . . 208 ML-6 Indoor Network Interface Device . . . . . . . . . . . . . . . . . . . 210 Line Modules for Network Interface Devices . . . . . . . . . . . . . . . 212 IDC Line Modules for Network Interface Devices. . . . . . . . . . . . . . . . . . . . . . . . . . 214 LPF-200 Series ADSL POTS Splitters. . . . . . . . . . . . . . . . . . . . . . 215 SNI®-2125 25-Pair Network Interface Device . . . . . . . . . . . . . . . . . . . . . . . 217 SNI®-8925 Multiline Network Interface Device. . . . . . . . . . . . . . . . . . . . . . 218 Terminal Access TA-1642 Terminal Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Terminal Access TA-1642XL Termination Enclosure. . . . . . . . . . . . . . . . . . . . . . .221 Terminal Access

134 135 136 137 139

Fiber Demarcation LightLink 470 Fiber Optic Demarcation. . . . . . . . . . . . . . . . . . . 140 OptiNID® 300 Series Optical Demarcation Slack Storage Closure. 141 OptiNID® 500 Optical Demarcation Closure . . . . . . . . . . . . . . . 142 OptiNID® 760XL Optical Demarcation Closure . . . . . . . . . . . . . 143 OptiNID® 1224 Optical Demarcation Closure. . . . . . . . . . . . . . . 144 FPB-201 Fiber Demarcation Box. . . . . . . . . . . . . . . . . . . . . . . . 145 OptiNID® Optical Demarcation Accessories . . . . . . . . . . . . . . . . 146

Fiber Management

Optical Connectors FASTConnect® Field-Installable Connectors. . . . . . . . . . . . . . . . FASTConnect® Universal Tool Kit. . . . . . . . . . . . . . . . . . . . . . . . Field Master® Field-Installable Connectors . . . . . . . . . . . . . . . . Field Master® Tool Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Crimp Tool for Field Master® Connectors. . . . . . . . . . . . . . . . . . FUSEConnect® Field-Installable Connectors. . . . . . . . . . . . . . . . FUSEConnect® MPO Field-Installable Connectors . . . . . . . . . . . FUSEConnect® Tool Kit and Accessories. . . . . . . . . . . . . . . . . . .

148 150 151 152 152 153 154 156

Rack Mount Panels 1RU Fiber Termination Patch/Splice Panel. . . . . . . . . . . . . . . . . .157 2RU Fiber Termination Patch/Splice Panel. . . . . . . . . . . . . . . . . .159 3RU Fiber Termination Patch Panel . . . . . . . . . . . . . . . . . . . . . . 161 4RU Fiber Termination Patch Panel . . . . . . . . . . . . . . . . . . . . . . 163 5RU Fiber Termination Patch Panel . . . . . . . . . . . . . . . . . . . . . . 165 6RU Fiber Patch and Splice Panel . . . . . . . . . . . . . . . . . . . . . . . 167 7RU Fiber Patch and Splice Panel . . . . . . . . . . . . . . . . . . . . . . . 169 8RU Fiber Patch and Splice Panel . . . . . . . . . . . . . . . . . . . . . . . 171 SPL3RU and SPL4RU—Optical Splice Shelf. . . . . . . . . . . . . . . . 173

3Q15

ii

Table of Contents

(cont.)

TA-200/205 Terminal Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . EOC Splitters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radio Frequency Interference Filter (RFI-P). . . . . . . . . . . . . . . . . Half Ringer Equivalent Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . Fujikura 70S Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Fujikura 21S Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Fujikura 19S Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Fujikura 12S Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Fujikura 70R Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Fujikura 19R Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Fujikura 12R Fusion Splicer. . . . . . . . . . . . . . . . . . . . . . . . . . . . CT-06 Fiber Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CT-11A Fiber Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CT-30 Fiber Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CT-02 Pocket Cleaver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot Jacket Strippers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Splice Protection Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FST-12 Fiber Separation Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . Fiber Arrangement Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ribbon Forming Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Splicer V-groove Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . Portable Tripod Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . ASW-02 Splicing Workstation. . . . . . . . . . . . . . . . . . . . . . . . . . FLX380-30x FlexTester3 OTDR . . . . . . . . . . . . . . . . . . . . . . . . . OFL280-10x FlexTester OTDR. . . . . . . . . . . . . . . . . . . . . . . . . . CS260-10 Contractor Series Live PON OTDR. . . . . . . . . . . . . . . CS260-20 Contractor Series Metro/Access OTDR. . . . . . . . . . . . M710 Multifunction OTDR. . . . . . . . . . . . . . . . . . . . . . . . . . . . M310 Enterprise OTDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M210 Multifunction Micro OTDR . . . . . . . . . . . . . . . . . . . . . . . OTDR Fiber Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPM5 and OPM4 Optical Power Meters. . . . . . . . . . . . . . . . . . OPM1 Optical Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . OPM4-FTTx PON Power Meter. . . . . . . . . . . . . . . . . . . . . . . . . OLS Series Light Sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OLS1 LED Light Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optical Loss Test Kits SMLP, SLP, MLP Series. . . . . . . . . . . . . . . . MLP1 Multimode Loss Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . VFI2 and HiLite Visual Fault Identifiers. . . . . . . . . . . . . . . . . . . . OFI-FTTx Active ONT Detector. . . . . . . . . . . . . . . . . . . . . . . . . . OFI-200 Optical Fiber Identifier. . . . . . . . . . . . . . . . . . . . . . . . . OFS300 Optical Microscope. . . . . . . . . . . . . . . . . . . . . . . . . . .

222 223 224 225 226 228 230 232 234 236 238 240 241 242 243 244 245 247 248 248 249 250 251 252 258 264 267 270 274 280 286 290 293 295 297 300 302 306 308 310 312 314

VS300 View Safe Video Microscope. . . . . . . . . . . . . . . . . . . . . . 316 FOCIS Flex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318 FOCIS WiFi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 FOCIS PRO Fiber Optic Connector Inspection System . . . . . . . . . 324 FOCIS Fiber Optic Connector Inspection System. . . . . . . . . . . . . 328 DFS1 Digital FiberScope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Prepaid Calibration Plans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 One-Click® Cleaner Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339 Cletop Cassette Cleaner Series. . . . . . . . . . . . . . . . . . . . . . . . . 341 FCC2 Enhanced Fiber Connector Cleaner and Preparation Fluid . 343 FiberWipes™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Field Portable Duffle Bag Cleaning Kits . . . . . . . . . . . . . . . . . . . 345 FCP1 Fiber Optic Cleaning Kits. . . . . . . . . . . . . . . . . . . . . . . . . 347

3Q15

iii

3Q15

iv

Fiber Optic Cable

Aerial Drop Cable Aerial Drop Cable is specifically designed for Fiber-to-the-Subscriber applications. It is a round, all dielectric cable ideally suited for self-supporting drop-type installations as well as in lashed or conduit builds. 6-Fiber Design

Temperature Range

Typical Spans with 2.0% Installation Sag:

Operating: -40ºC to + 70ºC

• NESC Heavy 100 ft (30 meters) • NESC Medium 185 ft (56 meters) • NESC Light 370 ft (113 meters)

Storage: -50ºC to + 70ºC Installation: -30ºC to + 70ºC Cable Components

12-Fiber Design Features

polyethylene outer jacket

Typical Spans with 2.0% Installation Sag:

• Designed for use with inexpensive attachment hardware • Compatible with standard splice closures • Self-supporting - no messenger needed • Small cross section for maximum density in closures and conduit

• NESC Heavy 75 ft (23 meters) • NESC Medium 140 ft (43 meters) • NESC Light 260 ft (75 meters)

gel-filled buffer tube optical fibers

Note: Typical installations should not be more than 4-6 spans. Point-to-point distance should not exceed 400 ft.

strength elements water-blocking system

Mechanical Data FIBER COUNT 1-6 7 - 12

NOMINAL DIAMETER INCHES .256 .307

MM 6.5 7.8

NOMINAL WEIGHT LBS/1000 FT 23 34

KG/KM 34 50

MAXIMUM LENGTHS* SINGLE-MODE MULTIMODE FEET METERS FEET METERS 32,800 10,000 26,250 8,000 27,500 8,400 26,250 8,000

* Longer lengths may be available upon request.

Installation Information FIBER COUNT 1-6 7 - 12

MAXIMUM LOADING OPERATING TENSION LBS N 270 1113 270 1113

MINIMUM BENDING RADIUS (DYNAMIC) INCHES CM 5 13 6 16

MINIMUM BENDING RADIUS (STATIC) INCHES CM 2.5 6.5 3 8

NOTE: AFL recommends coiling a minimum of 12 feet (3.6 meters) into 6 inch (0.15 meters) loops at the entrance to all splice closures.

Ordering Information FIBER COUNT 1-6 7 - 12 1-6 7 - 12 1-6 7 - 12

FIBER TYPE 62.5/125 Giga-Link™ 300 50/125 Giga-Link™ 600 Single-mode

AFL NO. AE00666110AA9 AE0126C110AC1 AE00656110AA9 AE0125C110AC1 AE00696110AA9 AE0129C110AC1

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1550 NM

BANDWIDTH (MHZ•KM) 850 NM 1300 NM

3.5

1.2

N/A

200

600

2.9

0.9

N/A

500

500

N/A

0.35

0.25

N/A

N/A

© 2002, AFL, all rights reserved. PP-1-00001, Revision 3, 1.9.13 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 1

Fiber Optic Cable

Mini-Span® ADSS Cable AFL Mini-Span All-Dielectric Self-Supporting (ADSS) cable is designed for outside plant aerial and duct applications in local and campus network loop architectures. From poleto-build to town-town installations, the Mini-Span cabling system, which includes cables, suspension, dead end and termination enclosures, offers a comprehensive transmission circuit infrastructure with proven, high-reliability performance. See AFL’s Fiber Optic Cable Hardware catalog for more information. As the ADSS cabling concept implies, a separate messenger support wire hanging system is not required, greatly reducing installation time and improving upfront and maintenance labor costs.

Temperature Range

Mini-Span includes fiber counts up to 144 optical fibers and any type or combination of single-mode and laser-optimized multimode fibers with the cable. Pole-to-Pole span lengths range from 50 feet to over 1000 feet.

Operating: -40ºC to +70ºC Storage:

-50ºC to +70ºC

Installation: -30ºC to +70ºC Installation Information CABLE Mini-Span 323 Mini-Span 383

NESC SPANS (@ 1.5% INITIAL SAG) FEET (METERS) LIGHT MEDIUM HEAVY 500 (152) 300 (91) 175 (53) 450 (137) 300 (91) 180 (55)

MAX. SAGGING TENSION LBS N 147 654 183 814

MAX. LOADING OPERATING TENSION LBS N 374 1668 402 1,785

MIN. BENDING RADIUS (DYNAMIC) INCHES CM 7 17 8 20

MIN. BENDING RADIUS (STATIC) INCHES CM 3.5 8.5 4 10

CABLE Mini-Span 424 Mini-Span 535 Mini-Span 693

NESC SPANS (@ 1% INITIAL SAG) FEET (METERS) LIGHT MEDIUM HEAVY 600 (183) 440 (134) 275 (84) 1050 (320) 850 (259) 575 (175) 750 (229) 600 (183) 500 (152)

MAX. SAGGING TENSION LBS N 424 1886 1,306 5,809 1,411 6,278

MAX. LOADING OPERATING TENSION LBS N 707 3145 1,783 7,936 1,856 8,260

MIN. BENDING RADIUS (DYNAMIC) INCHES CM 9 22 13 27 14 36

MIN. BENDING RADIUS (STATIC) INCHES CM 4 11 5 14 7 18

Optical Information

CABLE Mini-Span 323 Mini-Span 383 Mini-Span 424 Mini-Span 535 Mini-Span 693

MAXIMUM ATTENUATION (db/km) MULTIMODE MULTIMODE *62.5/125 µm 50/125 µm (850 nm/1300 nm) (850 nm/1300 nm) 0.40/0.30 3.5/1.2 3.5/1.2

SINGLE-MODE (1310 nm/1550 nm)

0.35/0.25

3.5/1.2

BANDWIDTH (MHz•km) MULTIMODE MULTIMODE *62.5/125 µm 50/125 µm (850 nm/1300 nm) (850 nm/1300 nm)

SINGLE-MODE (1310 nm/1550 nm)

2.9/0.9

n/a

200/600

500/500

* All 62.5/125 µm multimode ADSS cable transmission performances meet or exceed FDDI requirements. Premium transmission performance fibers available on request.

www.AFLglobal.com or (800) 235-3423

© 2010, AFL, all rights reserved. PP-1-00013, Revision 4, 7.17.14 Specifications are subject to change without notice.

2

Fiber Optic Cable

Mini-Span ADSS Cable ®

Mechanical Data

CABLE Mini-Span 323 Mini-Span 383 Mini-Span 424 Mini-Span 535 Mini-Span 693

NOMINAL DIAMETER INCHES 0.323 0.383 0.424 0.535 0.693

FIBER COUNT 2-24 2-48 2-60 2-96 2-144

NOMINAL WEIGHT LBS/1000’ KG/KM 35 53 49 72 57 84 100 148 151 224

MM 8.2 9.7 10.8 13.6 17.6

MAXIMUM LENGTHS* SINGLE-MODE MULTIMODE FEET METERS FEET METERS 32,800 10,000 26,250 8,000 32,800 10,000 26,250 8,000 32,800 10,000 26,250 8,000 32,800 10,000 26,250 8,000 23,000 7,000 23,000 7,000

* Longer lengths may be available upon request.

Ordering Information CABLE

Mini-Span 323

Mini-Span 383

Mini-Span 424

Mini-Span 535

Mini-Span 693

FIBER COUNT

FIBERS PER TUBE

NUMBER OF TUBES / FIBERS

SINGLE-MODE

AFL NO. MULTIMODE 62.5/125

MULTIMODE 50/125

6 12 18 24 6 12 18 24 30 36 48 6 12 18 24 30 36 48 60 6 12 18 24 30 36 48 60 72 84 96 12 24 36 48 60 72 84 96 108 120 132 144

6 6 6 6 6 12 12 12 12 12 12 6 12 12 12 12 12 12 12 6 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

1 w/6 2 w/6 3 w/6 4 w/6 1 w/6 (3 fillers) 1 w/12 (3 fillers) 1 w/12, 1 w/6 (2 fillers) 2 w/12 (2 fillers) 2 w/12, 1 w/6 (1 filler) 3 w/12 (1 filler) 4 w/12 1 w/6 (4 fillers) 1 w/12 (4 fillers) 1 w/12, 1 w/6 (3 fillers) 2 w/12 (3 fillers) 2 w/12, 1 w/6 (2 fillers) 3 w/12 (2 fillers) 4 w/12 (1 filler) 5 w/12 (no fillers) 1 w/6 (7 fillers) 1 w/12 (7 fillers) 1 w/12, 1 w/6 (6 fillers) 2 w/12 (6 fillers) 2 w/12, 1 w/6 (5 fillers) 3 w/12 (5 fillers) 4 w/12 (4 fillers) 5 w/12 (3 fillers) 6 w/12 (2 fillers) 7 w/12 (1 filler) 8 w/12 (no fillers) 1 w/12 (11 fillers) 2 w/12 (10 fillers) 3 w/12 (9 fillers) 4 w/12 (8 fillers) 5 w/12 (7 fillers) 6 w/12 (6 fillers) 7 w/12 (5 fillers) 8 w/12 (4 fillers) 9 w/12 (3 fillers) 10 w/12 (2 fillers) 11 w/12 (1 filler) 12 w/12 (no fillers)

AE00696420AA1 AE01296420AA1 AE01896420AA1 AE02496420AA1 AE0069C420AA0 AE0129C420AA0 AE0189C420AA0 AE0249C420AA0 AE0309C420AA0 AE0369C420AA0 AE0489C420AA0 AE0069C520AA4 AE0129C520AA4 AE0189C520AA4 AE0249C520AA4 AE0309C520AA4 AE0369C520AA4 AE0489C520AA4 AE0609C520AA4 AE0069C820EA7 AE0129C820EA7 AE0189C820EA7 AE0249C820EA7 AE0309C820EA7 AE0369C820EA7 AE0489C820EA7 AE0609C820EA7 AE0729C820EA7 AE0849C820EA7 AE0969C820EA7 AE0129CC20EA0 AE0249CC20EA0 AE0369CC20EA0 AE0489CC20EA0 AE0609CC20EA0 AE0729CC20EA0 AE0849CC20EA0 AE0969CC20EA0 AE1089CC20EA0 AE1209CC20EA0 AE1329CC20EA0 AE1449CC20EA0

AE00666420AA1 AE01266420AA1 AE01866420AA1 AE02466420AA1 AE0066C420AA0 AE0126C420AA0 AE0186C420AA0 AE0246C420AA0 AE0306C420AA0 AE0366C420AA0 AE0486C420AA0 AE0066C520AA4 AE0126C520AA4 AE0186C520AA4 AE0246C520AA4 AE0306C520AA4 AE0366C520AA4 AE0486C520AA4 AE0606C520AA4 AE0066C820EA7 AE0126C820EA7 AE0186C820EA7 AE0246C820EA7 AE0306C820EA7 AE0366C820EA7 AE0486C820EA7 AE0606C820EA7 AE0726C820EA7 AE0846C820EA7 AE0966C820EA7 AE0126CC20EA0 AE0246CC20EA0 AE0366CC20EA0 AE0486CC20EA0 AE0606CC20EA0 AE0726CC20EA0 AE0846CC20EA0 AE0966CC20EA0 AE1086CC20EA0 AE1206CC20EA0 AE1326CC20EA0 AE1446CC20EA0

AE00656420AA1 AE01256420AA1 AE01856420AA1 AE02456420AA1 AE0065C420AA0 AE0125C420AA0 AE0185C420AA0 AE0245C420AA0 AE0305C420AA0 AE0365C420AA0 AE0485C420AA0 AE0065C520AA4 AE0125C520AA4 AE0185C520AA4 AE0245C520AA4 AE0305C520AA4 AE0365C520AA4 AE0485C520AA4 AE0605C520AA4 AE0065C820EA7 AE0125C820EA7 AE0185C820EA7 AE0245C820EA7 AE0305C820EA7 AE0365C820EA7 AE0485C820EA7 AE0605C820EA7 AE0725C820EA7 AE0845C820EA7 AE0965C820EA7 AE0125CC20EA0 AE0245CC20EA0 AE0365CC20EA0 AE0485CC20EA0 AE0605CC20EA0 AE0725CC20EA0 AE0845CC20EA0 AE0965CC20EA0 AE1085CC20EA0 AE1205CC20EA0 AE1325CC20EA0 AE1445CC20EA0

Contact customer service for price and availability. Non-zero dispersion-shifted fibers are also available.

www.AFLglobal.com or (800) 235-3423

© 2010, AFL, all rights reserved. PP-1-00013, Revision 4, 7.17.14 Specifications are subject to change without notice.

3

Fiber Optic Cable

Mini-Span ADSS Cable ®

Sag and Tension Information

MINI-SPAN 383

MINI-SPAN 323

CABLE

SPAN FEET METERS 50 15 75 23 100 30 125 38 150 46 175 53 200 61 225 69 250 76 275 84 300 91 325 99 350 107 375 114 400 122 425 130 450 137 475 145 500 152 50 15 75 23 100 30 125 38 150 46 175 53 200 61 225 69 250 76 275 84 300 91 325 99 350 107 375 114 400 122 425 130 450 137

INITIAL SAG % 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

INITIAL TENSION LBS N 15 67 22 98 30 133 37 165 44 196 52 232 59 262 66 294 74 329 81 360 88 392 96 427 103 458 111 494 118 525 125 556 133 592 140 623 147 654 20 89 30 133 41 182 51 227 61 271 71 316 81 360 91 405 101 449 112 498 122 543 132 587 142 632 152 676 162 721 172 765 183 814

NESC LIGHT LOADING SAG TENSION % LBS N 0.4 66 294 0.5 90 339 0.5 111 494 0.5 131 583 0.5 150 667 0.6 168 748 0.6 185 825 0.6 202 900 0.6 219 973 0.6 235 1,044 0.6 250 1,113 0.7 265 1,181 0.7 280 1,247 0.7 295 1,312 0.7 309 1,376 0.7 324 1,440 0.7 338 1,502 0.7 351 1,563 0.7 365 1,624 0.5 76 337 0.5 103 457 0.6 128 568 0.6 151 671 0.6 173 768 0.6 194 862 0.7 214 952 0.7 234 1,040 0.7 253 1,125 0.7 272 1,209 0.7 290 1,290 0.8 308 1,370 0.8 325 1,448 0.8 343 1,525 0.8 360 1,601 0.8 377 1,676 0.8 393 1,750

NESC MEDIUM LOADING SAG TENSION % LBS N 2.1 101 449 2.3 135 602 2.5 166 741 2.7 195 867 2.8 222 989 3.0 248 1,104 3.1 273 1,214 3.2 297 1,321 3.3 320 1,424 3.4 342 1,524 3.5 364 1,621 — — — — — — — — — — — — — — — — — — — — — — — — 2.2 108 482 2.4 146 648 2.6 179 798 2.8 211 938 2.9 240 1,070 3.0 269 1,196 3.2 296 1,317 3.3 322 1,434 3.4 348 1,547 3.5 372 1,657 3.5 397 1,765 — — — — — — — — — — — — — — — — — —

NESC HEAVY LOADING SAG TENSION % LBS N 3.2 152 677 3.6 202 901 3.9 248 1,102 4.2 289 1,288 4.5 329 1,463 4.7 366 1,629 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 3.2 161 717 3.6 215 956 4.0 263 1,171 4.2 308 1,370 4.5 350 1,558 4.7 390 1,736 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Typical Cable Components 4 Position 323 or 383

polyethylene outer jacket tape torque balanced aramid ripcord FRP central member gel-filled loose buffer tube with optical fibers water-blocking system

www.AFLglobal.com or (800) 235-3423

© 2010, AFL, all rights reserved. PP-1-00013, Revision 4, 7.17.14 Specifications are subject to change without notice.

4

Fiber Optic Cable

Mini-Span ADSS Cable ®

Sag and Tension Information

MINI-SPAN 424

CABLE

SPAN FEET METERS 50 15 75 23 100 30 125 38 150 46 175 53 200 61 225 69 250 76 275 84 300 91 325 99 350 107 375 114 400 122 425 130 450 137 475 145 500 152 525 160 550 168 575 175 600 183

INITIAL SAG % 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

INITIAL TENSION LBS N 35 156 53 236 71 316 88 391 106 472 124 552 141 627 159 707 177 787 194 863 212 943 230 1,023 247 1,099 265 1,179 283 1,259 300 1,334 318 1,415 336 1,495 353 1,570 371 1,650 389 1,730 406 1,806 424 1,886

NESC LIGHT LOADING SAG TENSION % LBS N 0.4 104 463 0.4 142 632 0.5 176 783 0.5 208 925 0.5 238 1,059 0.5 268 1,192 0.6 296 1,317 0.6 324 1,441 0.6 351 1,561 0.6 378 1,681 0.6 404 1,737 0.6 429 1,908 0.6 455 2,024 0.6 479 2,131 0.6 504 2,242 0.7 528 2,349 0.7 552 2,455 0.7 576 2,562 0.7 600 2,669 0.7 623 2,771 0.7 646 2,874 0.7 669 2,976 0.7 692 3,078

NESC MEDIUM LOADING SAG TENSION % LBS N 1.7 142 632 1.9 191 850 2.1 235 1,095 2.2 276 1,228 2.4 315 1,401 2.5 353 1,570 2.6 389 1,730 2.7 424 1,886 2.7 458 2,037 2.8 491 2,184 2.8 524 2,331 2.9 556 2,473 3.0 587 2,611 3.0 618 2,749 3.1 648 2,882 3.1 678 3,016 3.2 703 3,145 — — — — — — — — — — — — — — — — — —

NESC HEAVY LOADING SAG TENSION % LBS N 2.6 207 921 3.0 275 1,223 3.2 337 1,499 3.4 395 1,757 3.6 449 1,997 3.8 501 2,229 4.0 50 2,447 4.1 598 2,660 4.2 645 2,869 4.3 690 3,069 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Typical Cable Components 5 Position 424

polyethylene outer jacket tape torque balanced aramid ripcord FRP central member gel-filled loose buffer tube with optical fibers water-blocking system

www.AFLglobal.com or (800) 235-3423

© 2010, AFL, all rights reserved. PP-1-00013, Revision 4, 7.17.14 Specifications are subject to change without notice.

5

Fiber Optic Cable

Mini-Span ADSS Cable ®

Sag and Tension Information

MINI-SPAN 693

MINI-SPAN 535

CABLE

SPAN FEET METERS 50 15 100 30 150 46 200 61 250 76 300 91 350 107 400 122 450 137 500 152 550 168 575 175 600 183 650 198 700 213 750 229 800 244 850 259 900 274 950 290 1,000 305 1,050 320 50 15 100 30 150 46 200 61 250 76 300 91 350 107 400 122 450 137 500 152 550 168 600 183 650 198 700 213 750 229

INITIAL SAG % 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

INITIAL TENSION LBS N 62 276 124 552 187 832 249 1,108 311 1,383 373 1,659 435 1,935 497 2,211 560 2,491 622 2,767 684 3,043 715 3,180 746 3,318 808 3,594 870 3,870 933 4,150 995 4,426 1,057 4,702 1,119 4,978 1,181 5,253 1,243 5,529 1,306 5,809 94 418 188 836 282 1,255 376 1,673 470 2,091 565 2,514 659 2,932 753 3,350 847 3,769 941 4,187 1,035 4,605 1,129 5,023 1,223 5,442 1,317 5,860 1,411 6,278

NESC LIGHT LOADING SAG TENSION % LBS N 0.4 160 713 0.5 274 1,220 0.6 375 1,670 0.6 469 2,088 0.6 559 2,486 0.6 645 2,868 0.7 728 3,239 0.7 810 3,601 0.7 889 3,956 0.7 968 4,304 0.7 1,045 4,647 0.7 1,083 4,817 1,121 4,985 0.7 0.8 1,196 5,320 0.8 1,270 5,650 1,344 5,978 0.8 0.8 1,417 6,303 0.8 1,489 6,625 0.8 1,561 6,945 0.8 1,633 7,263 0.8 1,704 7,579 1,775 7,894 0.8 0.5 201 894 0.6 347 1,544 0.6 479 2,131 0.7 602 2,679 721 3,208 0.7 0.7 836 3,720 0.8 949 4,223 0.8 1,059 4,712 0.8 1,168 5,197 0.8 1,275 5,673 0.8 1,381 6,145 0.8 1,486 6,612 0.8 1,591 7,079 0.9 1,694 7,537 0.9 1,797 7,996

NESC MEDIUM LOADING SAG TENSION % LBS N 1.5 206 918 1.7 347 1,542 1.9 469 2,087 2.1 582 2,590 2.2 689 3,063 2.3 790 3,515 2.4 888 3,951 2.5 983 4,374 2.5 1,076 4,785 2.6 1,166 5,188 2.7 1,255 5,583 2.7 1,299 5,778 2.7 1,342 5,971 2.8 1,428 6,353 2.8 1,513 6,730 2.8 1,597 7,102 2.9 1,679 7,469 2.9 1,761 7,833 — — — — — — — — — — — — 1.5 241 1,072 1.8 409 1,820 2.0 559 2,487 2.1 698 3,106 2.2 830 3,693 2.3 958 4,263 2.4 1,081 4,810 2.5 1,202 5,348 2.5 1,321 5,878 2.6 1,437 6,394 2.6 1,552 6,906 2.7 1,665 7,408 ­— ­— ­— ­— ­— ­— ­— ­— — ­

NESC HEAVY LOADING SAG TENSION % LBS N 2.1 297 1,319 2.5 489 2,176 2.8 655 2,915 3.1 807 3,588 3.3 948 4,217 3.4 1,082 4,813 3.6 1,210 5,384 3.7 1,334 5,935 3.8 1,454 6,469 3.9 1,571 6,988 4.0 1,685 7,495 4.1 1,741 7,745 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 2.1 336 1,495 2.6 558 2,483 2.9 752 3,346 3.1 930 4,138 3.3 1,097 4,881 3.4 1,257 5,593 3.6 1,411 6,278 3.7 1,560 6,941 3.8 1,705 7,586 3.9 1,847 8,218 ­— ­— ­— ­— ­— ­— ­— ­— ­— — ­ ­— ­— ­— ­— ­—

Typical Cable Components 12 Position 693 8 Position 535

polyethylene outer jacket tape torque balanced aramid ripcord FRP central member gel-filled loose buffer tube with optical fibers water-blocking system

www.AFLglobal.com or (800) 235-3423

© 2010, AFL, all rights reserved. PP-1-00013, Revision 4, 7.17.14 Specifications are subject to change without notice.

6

Fiber Optic Cable

Mini-Span ADSS Cable ®

Reel Information REEL SPECS REEL A ITEM INCHES CM Reel Height 42 106.7 Reel Width Outside 36 91.4 Reel Width Inside 32 81.6 Drum Diameter 23 58.7 Arbor Hole Diameter 3 7.9 Reel Weight with Lagging 180 lbs 82 kg MAXIMUM CABLE LENGTH (feet/meters) Mini-Span 323 15,256 ft 4,650 m Mini-Span 383 10,827 ft 3,300 m Mini-Span 424 8,850 ft 2,700 m Mini-Span 484 6,500 ft 2,000 m Mini-Span 535 5,500 ft 1,675 m Mini-Span 693 — —

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

32,800 ft 25,202 ft 20,250 ft 15,750 ft 12,800 ft 9,300 ft

— 32,800 ft 26,250 ft 21,000 ft 17,225 ft 12,500 ft

— — 32,800 ft 32,800 ft 26,000 ft 16,330 ft

— — — — 32,800 ft 23,000 ft

10,000 m 7,700 m 6,200 m 4,800 m 3,900 m 2,835 m

— 10,000 m 8,000 m 6,450 m 5,250 m 3,810 m

— — 10,000 m 10,000 m 6,920 m 4,975 m

— — — — 10,000 m 7,000 m

AFL provides ADSS cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available on request.

www.AFLglobal.com or (800) 235-3423

© 2010, AFL, all rights reserved. PP-1-00013, Revision 4, 7.17.14 Specifications are subject to change without notice.

7

Fiber Optic Cable

Flex-Span™ ADSS Fiber Optic Cable Flex-Span ADSS expands on AFL's single jacket ADSS portfolio. Flex-Span designs are optimized for a broader combination of fiber counts and span lengths, providing ADSS system designers more flexibility in their product selection. As its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass. Flex-Span ADSS includes fiber counts up to 144 optical fibers and any type or combination of single-mode or multimode fibers within the cable. Pole-to-pole span lengths range from 50 ft. to over 1,000 ft.

Temperature Range Features

Operating: -40ºC to +70ºC

•• Suitable for use on distribution lines •• Gel-filled buffer tubes are S-Z stranded for easy mid-span access •• Cable is water-blocked using dry core technology, therefore no messy flooding compounds •• Design details listed below for span lengths up to 1100 ft (457 m) and fiber counts up to 144 •• Requires the use of formed wire dead ends

Storage: -50ºC to +70ºC

REEL CAPACITY

Installation: -30ºC to +70ºC

CABLE DIAMETER

FEET

METERS

< 0.85" (21.6 mm)

23,000

7,000

NOTE: Longer lengths may be available upon request.

Cable Components (Representative) polyethylene outer jacket tape torque balanced aramid yarns ripcord FRP central member gel-filled loose buffer tube (2-12 optical fibers / tube)

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50 Laser-Link™ 300 (9) Single-mode (Q) Non-zero Dispersion-shifted Single-mode (K) SM Futureguide SR-15e Bend Insensitive

Typical Maximum Lengths

water-blocking system

MAXIMUM ATTENUATION (dB/km) 850 nm 1300 nm 1310 nm 1550 nm 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A N/A 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHz•km) 850 nm 1300 nm 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A N/A N/A

GIGABIT ETHERNET MINIMUM LINK DISTANCE (meters) 850 nm 1300 nm 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A N/A N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight with Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 167.6 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 311 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL provides ADSS cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request.

www.AFLglobal.com or (800) 235-3423

© 2014, AFL, all rights reserved. PP-1-00070, Revision 0, 2.25.14 Specifications are subject to change without notice.

8

Fiber Optic Cable

Flex-Span™ ADSS Fiber Optic Cable NESC LIGHT @ 1.5% INSTALLATION SAG SPAN FEET METERS

L

I

G

H

T

12 FIBERS 525 160 600 183 700 213 800 244 925 282 1050 320 1100 335 24 FIBERS 525 160 600 183 700 213 800 244 925 282 1010 308 1100 335 48 FIBERS 525 160 600 183 700 213 800 244 925 282 1030 314 1100 335 72 FIBERS 725 221 800 244 875 267 975 297 1075 328 96 FIBERS 925 282 1000 305 144 FIBERS 1050 320 1

WEIGHT

AFL NO.

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION1 LOADED SAG % LBS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

AE012C520A08 AE012C520AA0 AE012C520AA5 AE012C520E08 AE012C520EA1 AE012C520EA2 AE012C520EA4

0.057 0.057 0.057 0.059 0.059 0.059 0.059

84 84 84 88 88 88 88

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 598 746 809 999 1062 1189

2398 2661 3320 3600 4445 4726 5291

248 284 333 395 457 519 544

1104 1264 1482 1758 2034 2309 2421

0.8 0.8 0.8 0.8 0.8 0.8 0.8

521 592 702 807 947 1059 1127

2318 2634 3124 3591 4214 4712 5015

AE024C520A08 AE024C520AA0 AE024C520AA5 AE024C520EA0 AE024C520EA1 AE024C520EA2 AE024C520EA4

0.058 0.058 0.058 0.06 0.06 0.06 0.06

86 86 86 90 90 90 90

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 598 746 936 999 1062 1189

2398 2661 3320 4165 4445 4726 5291

252 289 338 402 464 507 553

1121 1286 1504 1789 2065 2256 2461

0.8 0.8 0.8 0.8 0.8 0.8 0.8

523 594 705 838 951 1032 1131

2327 2643 3137 3729 4232 4592 5033

AE048C520A08 AE048C520AA1 AE048C520AA5 AE048C520EA0 AE048C520EA1 AE048C520EA2 AE048C520EA4

0.06 0.06 0.06 0.062 0.062 0.062 0.062

89 89 89 93 93 93 93

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 628 746 936 999 1062 1189

2398 2794 3320 4165 4445 4726 5291

261 298 349 414 479 534 570

1161 1326 1553 1842 2131 2376 2536

0.9 0.9 0.8 0.8 0.9 0.9 0.9

528 606 711 845 958 1056 1140

2350 2697 3164 3760 4263 4699 5073

AE072C620A08 AE072C620AA0 AE072C620AA3 AE072C620AA7 AE072C620EA0

0.075 0.075 0.075 0.075 0.075

112 112 112 112 112

0.465 0.465 0.465 0.465 0.465

11.8 11.8 11.8 11.8 11.8

854 913 1002 1120 1250

3800 4063 4459 4984 5562

454 501 548 611 674

2020 2229 2438 2719 2999

0.9 0.9 0.9 0.9 0.9

832 911 998 1113 1230

3702 4054 4441 4953 5473

AE096C820A08 AE096C820AA1

0.1 0.1

148 149

0.528 0.528

13.4 13.4

1296 1384

5767 6159

769 832

3422 3702

1 1

1270 1370

5651 6096

AE144CC20A08

0.164

244

0.673

17.10

2070

9211

1433

6377

1.1

2048

9113

Initial tension indicates tension before 10 year creep.

Note: Diameter and weight subject to change without notice  Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

www.AFLglobal.com or (800) 235-3423

© 2014, AFL, all rights reserved. PP-1-00070, Revision 0, 2.25.14 Specifications are subject to change without notice.

9

Fiber Optic Cable

Flex-Span™ ADSS Fiber Optic Cable NESC MEDIUM @ 1.5% INSTALLATION SAG SPAN

AFL NO.

FEET METERS

M

E

D

I

U

M

12 FIBERS 375 114 400 122 500 152 550 168 650 198 700 213 800 244 24 FIBERS 375 114 400 122 500 152 625 190 650 198 700 213 800 244 48 FIBERS 375 114 425 130 500 152 625 190 650 198 700 213 800 244 72 FIBERS 525 160 575 175 625 190 710 216 800 244 96 FIBERS 725 221 775 236 144 FIBERS 875 1

267

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION1 LOADED SAG % LBS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

AE012C520A08 AE012C520AA0 AE012C520AA5 AE012C520E08 AE012C520EA1 AE012C520EA2 AE012C520EA4

0.057 0.057 0.057 0.059 0.059 0.059 0.059

84 84 84 88 88 88 88

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 598 746 809 999 1062 1189

2398 2661 3320 3600 4445 4726 5291

178 189 238 272 321 346 396

792 841 1059 1210 1428 1540 1762

3.5 3.5 3.5 3.5 3.4 3.5 3.5

532 573 717 793 949 1018 1157

2367 2550 3191 3529 4223 4530 5148

AE024C520A08 AE024C520AA0 AE024C520AA5 AE024C520EA0 AE024C520EA1 AE024C520EA2 AE024C520EA4

0.058 0.058 0.058 0.06 0.06 0.06 0.06

86 86 86 90 90 90 90

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 598 746 936 999 1062 1189

2398 2661 3320 4165 4445 4726 5291

181 192 242 314 326 352 402

805 854 1077 1397 1451 1566 1789

3.5 3.5 3.5 3.5 3.4 3.5 3.5

533 575 719 908 951 1021 1160

2372 2559 3199 4040 4232 4543 5162

AE048C520A08 AE048C520AA1 AE048C520AA5 AE048C520EA0 AE048C520EA1 AE048C520EA2 AE048C520EA4

0.06 0.06 0.06 0.062 0.062 0.062 0.062

89 89 89 93 93 93 93

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 628 746 936 999 1062 1189

2398 2794 3320 4165 4445 4726 5291

187 211 250 324 337 363 415

832 939 1112 1442 1500 1615 1847

3.5 3.5 3.5 3.5 3.4 3.5 3.5

536 612 723 913 957 1027 1167

2385 2723 3217 4063 4258 4570 5193

AE072C620A08 AE072C620AA0 AE072C620AA3 AE072C620AA7 AE072C620EA0

0.075 0.075 0.075 0.075 0.075

112 112 112 112 112

0.465 0.465 0.465 0.465 0.465

11.8 11.8 11.8 11.8 11.8

854 913 1002 1120 1250

3800 4063 4459 4984 5562

328 360 391 445 501

1460 1602 1740 1980 2229

3.4 3.4 3.4 3.5 3.5

825 899 979 1108 1245

3671 4000 4356 4930 5540

AE096C820A08 AE096C820AA1

0.1 0.1

148 149

0.528 0.528

13.4 13.4

1296 1384

5767 6159

603 645

2683 2870

3.4 3.4

1282 1370

5705 6096

AE144CC20A08

0.164

244

0.673

17.10

2070

9211

1195

5318

3.2

2028

9024

Initial tension indicates tension before 10 year creep.

Note: Diameter and weight subject to change without notice  Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

www.AFLglobal.com or (800) 235-3423

© 2014, AFL, all rights reserved. PP-1-00070, Revision 0, 2.25.14 Specifications are subject to change without notice.

10

Fiber Optic Cable

Flex-Span™ ADSS Fiber Optic Cable NESC HEAVY @ 1.5% INSTALLATION SAG SPAN

AFL NO.

FEET METERS

H

E

A

V

Y

12 FIBERS 200 61 250 76 300 91 325 99 400 122 450 137 500 152 24 FIBERS 200 61 250 76 300 91 375 114 400 122 450 137 500 152 48 FIBERS 200 61 250 76 300 91 375 114 400 122 450 137 500 152 72 FIBERS 300 91 350 107 400 122 450 137 500 152 96 FIBERS 400 122 500 152 144 FIBERS 600 183 1

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION1 LOADED SAG % LBS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

AE012C520A08 AE012C520AA0 AE012C520AA5 AE012C520E08 AE012C520EA1 AE012C520EA2 AE012C520EA4

0.057 0.057 0.057 0.059 0.059 0.059 0.059

84 84 84 88 88 88 88

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 598 746 809 999 1062 1189

2398 2661 3320 3600 4445 4726 5291

95 118 143 160 198 222 247

423 525 636 712 881 988 1099

4.5 4.6 4.6 4.6 4.6 4.7 4.7

485 585 710 775 955 1057 1177

2158 2603 3159 3449 4250 4703 5237

AE024C520A08 AE024C520AA0 AE024C520AA5 AE024C520EA0 AE024C520EA1 AE024C520EA2 AE024C520EA4

0.058 0.058 0.058 0.06 0.06 0.06 0.06

86 86 86 90 90 90 90

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 598 746 936 999 1062 1189

2398 2661 3320 4165 4445 4726 5291

96 120 145 188 201 219 251

427 534 645 837 894 975 1117

4.5 4.6 4.6 4.6 4.6 4.7 4.7

485 586 712 897 957 1054 1179

2158 2608 3168 3991 4258 4690 5246

AE048C520A08 AE048C520AA1 AE048C520AA5 AE048C520EA0 AE048C520EA1 AE048C520EA2 AE048C520EA4

0.06 0.06 0.06 0.062 0.062 0.062 0.062

89 89 89 93 93 93 93

0.425 0.425 0.425 0.433 0.433 0.433 0.433

10.8 10.8 10.8 11 11 11 11

539 628 746 936 999 1062 1189

2398 2794 3320 4165 4445 4726 5291

99 124 150 194 207 233 259

441 552 667 863 921 1037 1153

4.5 4.6 4.6 4.6 4.6 4.7 4.7

487 596 714 900 960 1062 1183

2167 2652 3177 4005 4272 4726 5264

AE072C620A08 AE072C620AA0 AE072C620AA3 AE072C620AA7 AE072C620EA0

0.075 0.075 0.075 0.075 0.075

112 112 112 112 112

0.465 0.465 0.465 0.465 0.465

11.8 11.8 11.8 11.8 11.8

854 913 1002 1120 1250

3800 4063 4459 4984 5562

188 219 250 282 313

837 975 1112 1255 1393

4.4 4.6 4.6 4.6 4.6

774 880 995 1117 1243

3444 3916 4428 4970 5531

AE096C820A08 AE096C820AA1

0.1 0.1

148 149

0.528 0.528

13.4 13.4

1296 1384

5767 6159

333 416

1482 1851

4.3 4.5

1140 1364

5073 6070

AE144CC20A08

0.164

244

0.673

17.10

2070

9211

819

3644

4.3

2007

8931

Initial tension indicates tension before 10 year creep.

Note: Diameter and weight subject to change without notice  Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

www.AFLglobal.com or (800) 235-3423

© 2014, AFL, all rights reserved. PP-1-00070, Revision 0, 2.25.14 Specifications are subject to change without notice.

11

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable AFL-ADSS® (All-Dielectric Self-Supporting) cable is ideal for installation in distribution as well as transmission environments, even when live-line installations are required. As its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass, making ADSS an economical and simple means of achieving a fiber optic network. AFL manufactures its own line of attachment hardware as well as supplies formed wire fittings when preferred. Temperature Range

Typical Maximum Lengths

Operating: -40ºC to +70ºC Features •• Suitable for use on distribution and high voltage transmission lines •• Track-resistant outer jacket available for installations on high voltage lines where space potentials reach up to 25 kV •• Gel-filled buffer tubes are S-Z stranded for easy mid-span access •• Cable is water-blocked using dry core technology, therefore no messy flooding compounds •• Design details listed below for span lengths up to 1500 ft (457 m) and fiber counts up to 432 •• Custom designs available for larger span lengths or other fiber counts

Storage: -50ºC to +70ºC Installation: -30ºC to +70ºC

REEL CAPACITY CABLE DIAMETER

FEET

METERS

< 0.85" (21.6 mm) > 0.85" (21.6 mm)

23,000 10,000

7,000 3,000

NOTE: Longer lengths may be available upon request. Lengths shown may require non-standard reel sizes/types.

Cable Components polyethylene or track resistant outer jacket polyethylene inner jacket non-hygroscopic core wrap torque-balanced aramid yarns non-hygroscopic core wrap ripcords gel-filled loose buffer tube (4-24 optical fibers / tube) FRP central member water-blocking binder

Quote Request Information

A - XXX - XXXX - X - X - X - X

Line Voltage A= Less than 115 kV B = ≥115 kV

Fiber Count 002 = 2 fibers 432 = 432 fibers

Span Length 0100 =1 00 1500 = 1500

Fiber Code Unit of Measure F =F eet M = Meters

NESC Loading Condition L =L ight M = Medium H = Heavy

6 =6 2.5/125 GIGA-Link™ 300 8 = 62.5/125 GIGA-Link™ 1000 5 = 50/125 GIGA-Link™ 600 7 = 50/125 GIGA-Link™ 2000 L = 50 Laser-Link™ 300 9 = Single-mode Q = Non-zero Dispersion-shifted Single-mode K = SM Futureguide SR-15e Bend Insensitive

NOTE: The designs listed are only a sampling of the options available from AFL. Contact customer service for a cable designed to your exact specifications.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 12

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50 Laser-Link™ 300 (9) Single-mode (Q) Non-zero Dispersion-shifted Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (dB/km) 850 nm 1300 nm 1310 nm 1550 nm 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 3.5 1.2 N/A N/A N/A N/A 0.35 0.25 N/A N/A N/A 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHz•km) 850 nm 1300 nm 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A N/A N/A

GIGABIT ETHERNET MINIMUM LINK DISTANCE (meters) 850 nm 1300 nm 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A N/A N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight with Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 167.6 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 311 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL provides ADSS cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 13

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC LIGHT LOADING @ 1% INSTALLATION SAG SPAN

L

I

G

H

T

FEET 12 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 24 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 36 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.080 0.080 0.080 0.080 0.080 0.080 0.084 0.084 0.084 0.084 0.085 0.090 0.090 0.090 0.090

119 119 119 119 119 119 125 125 126 126 126 134 134 134 134

0.500 0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4

539 539 539 628 746 936 1126 1253 1569 1569 1823 1950 2203 2330 2456

2398 2398 2398 2793 3320 4162 5008 5572 6981 6981 8108 8672 9799 10363 10927

100 201 301 401 502 602 737 843 949 1054 1162 1350 1463 1576 1689

446 892 1338 1785 2232 2679 3280 3750 4221 4690 5171 6005 6508 7010 7512

0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

194 333 459 597 739 894 1079 1227 1409 1535 1708 1926 2103 2258 2412

862 1479 2043 2654 3286 3976 4800 5459 6269 6829 7595 8569 9356 10044 10731

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.081 0.081 0.081 0.081 0.081 0.081 0.085 0.085 0.085 0.085 0.086 0.091 0.091 0.091

121 121 121 121 121 121 127 127 127 127 127 135 136 136

0.500 0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.512 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.0 13.4 13.4 13.4

539 539 539 628 746 936 1126 1253 1569 1696 1823 1950 2203 2456

2398 2398 2398 2793 3320 4162 5008 5572 6981 7545 8108 8672 9799 10927

102 203 305 407 508 610 747 854 961 1068 1177 1366 1480 1595

452 904 1356 1808 2261 2714 3322 3797 4274 4750 5236 6075 6584 7094

0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

194 334 462 600 743 899 1085 1234 1416 1566 1717 1937 2114

865 1486 2053 2668 3304 3998 4826 5489 6301 6965 7635 8614 9405

457

0.091

136

0.528

13.4

2583

11490

1709

7602

0.8

2292 2447

10194 10886

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.082 0.082 0.082 0.082 0.082 0.082 0.086 0.086 0.086 0.086 0.087 0.092 0.092 0.092 0.092

123 123 123 123 123 123 129 129 129 129 129 137 137 137 137

0.500 0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4

539 598 598 598 776 999 1189 1253 1569 1569 1823 2076 2203 2330 2456

2398 2661 2661 2661 3452 4444 5290 5572 6981 6981 8108 9236 9799 10363 10927

103 206 309 412 515 618 756 864 973 1081 1192 1382 1497 1613 1728

458 916 1375 1833 2291 2749 3363 3843 4328 4809 5302 6147 6659 7175 7687

0.6 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

195 343 464 598 752 915 1102 1241 1424 1552 1726 1969 2125 2281 2438

867 1526 2064 2660 3345 4070 4902 5520 6334 6904 7678 8759 9452 10146 10845

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 14

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC LIGHT LOADING @ 1% INSTALLATION SAG SPAN

L

I

G

H

T

FEET 48 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 60 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 72 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.083 0.083 0.083 0.083 0.083 0.083 0.087 0.087 0.088 0.088 0.088 0.093 0.093 0.093 0.093

124 124 124 124 124 124 130 130 130 130 131 139 139 139 139

0.500 0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4

539 598 598 628 776 999 1189 1253 1569 1569 1823 2076 2330 2456 2456

2398 2661 2661 2793 3452 4444 5290 5572 6981 6981 8108 9236 10363 10927 10927

104 209 313 417 522 626 765 875 985 1094 1206 1398 1515 1632 1748

463 930 1392 1855 2322 2785 3403 3892 4381 4866 5365 6219 6739 7259 7775

0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

196 344 476 606 756 920 1108 1247 1431 1560 1735 1979 2158 2315 2450

872 1530 2117 2696 3363 4092 4929 5547 6365 6939 7718 8803 9599 10298 10898

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.084 0.084 0.084 0.084 0.085 0.085 0.089 0.089 0.089 0.089 0.089 0.094 0.094 0.094

126 126 126 126 126 126 132 132 132 132 132 140 140 140

0.500 0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.512 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.0 13.4 13.4 13.4

539 539 539 628 809 936 1126 1316 1569 1569 1823 2076 2330 2330

2398 2398 2398 2793 3599 4162 5008 5854 6981 6981 8108 9236 10363 10363

106 211 317 422 528 634 775 885 997 1107 1221 1414 1532 1650

472 939 1410 1877 2349 2820 3447 3937 4435 4924 5431 6290 6815 7340

0.6 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

197 339 469 610 766 914 1102 1265 1439 1568 1744 1989 2169

876 1508 2086 2713 3407 4066 4902 5627 6401 6975 7758 8848 9648

457

0.094

140

0.528

13.4

2710

12054

1769

7869

0.8

2305 2507

10253 11152

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.100 0.100 0.100 0.100 0.100 0.100 0.108 0.108 0.108 0.108 0.109 0.109 0.109 0.109 0.109

148 148 148 148 148 149 161 161 161 161 161 162 162 162 162

0.535 0.535 0.535 0.535 0.535 0.535 0.559 0.559 0.559 0.559 0.559 0.559 0.559 0.559 0.559

13.6 13.6 13.6 13.6 13.6 13.6 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2

854 854 854 854 854 1031 1314 1504 1884 1884 2011 2264 2391 2644 2771

3797 3797 3797 3797 3797 4587 5843 6689 8380 8380 8943 10071 10634 11762 12326

125 249 374 499 623 748 949 1084 1221 1356 1492 1628 1767 1903 2040

556 1108 1664 2220 2771 3327 4221 4822 5431 6032 6637 7242 7860 8465 9074

0.6 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

235 405 561 709 853 1025 1280 1464 1677 1831 2004 2198 2374 2568 2741

1045 1802 2495 3154 3794 4559 5694 6512 7460 8145 8914 9777 10560 11423 12193

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 15

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC LIGHT LOADING @ 1% INSTALLATION SAG SPAN

L

I

G

H

T

FEET 84 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 96 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 108 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.131 0.131 0.131 0.131 0.131 0.131 0.131 0.131 0.131 0.138 0.138 0.138 0.138 0.138 0.138

195 195 195 195 195 195 195 195 195 205 205 205 206 206 206

0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.626 0.626 0.626 0.626 0.626 0.626

15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.9 15.9 15.9 15.9 15.9 15.9

1296 1296 1296 1296 1296 1296 1503 1692 1946 2326 2453 2706 2960 3086 3340

5763 5763 5763 5763 5763 5763 6685 7528 8655 10346 10910 12037 13165 13728 14856

164 328 492 656 820 984 1148 1313 1477 1725 1898 2071 2244 2417 2590

730 1459 2189 2918 3648 4377 5107 5841 6570 7673 8443 9212 9982 10751 11521

0.6 0.7 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

295 512 712 903 1089 1270 1481 1689 1907 2216 2422 2647 2872 3079 3304

1312 2277 3167 4017 4844 5649 6588 7513 8483 9857 10774 11774 12775 13696 14697

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.139 0.139 0.139 0.139 0.139

197 197 197 197 197 197 197 197 197 207 207 207 207 207

0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.626 0.626 0.626 0.626 0.626

15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.9 15.9 15.9 15.9 15.9

1296 1296 1296 1296 1296 1296 1503 1756 1946 2326 2453 2706 2960 3213

5763 5763 5763 5763 5763 5763 6685 7810 8655 10346 10910 12037 13165 14292

165 331 496 661 827 992 1158 1324 1489 1738 1912 2087 2261 2436

734 1472 2206 2940 3679 4413 5151 5889 6623 7731 8505 9283 10057 10836

0.6 0.7 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

296 514 715 907 1093 1276 1488 1706 1915 2225 2433 2659 2885

1317 2286 3180 4035 4862 5676 6619 7589 8518 9897 10823 11828 12833

457

0.139

207

0.626

15.9

3340

14856

2610

11610

0.9

3111 3319

13838 14764

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.178 0.178 0.178 0.178 0.178 0.178 0.178

254 254 254 254 254 254 254 254 264 265 265 265 265 265 265

0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.701 0.701 0.701 0.701 0.701 0.701 0.701

17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.8 17.8 17.8 17.8 17.8 17.8 17.8

2070 2070 2070 2070 2070 2070 2070 2129 2467 2720 3100 3354 3607 3860 4114

9207 9207 9207 9207 9207 9207 9207 9470 10972 12099 13790 14918 16045 17172 18300

213 426 639 852 1065 1278 1491 1704 1999 2222 2447 2670 2893 3117 3340

947 1895 2842 3790 4737 5685 6632 7580 8892 9884 10885 11877 12869 13865 14857

0.6 0.7 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

371 648 904 1149 1387 1621 1851 2087 2430 2698 2984 3252 3520 3789 4057

1650 2882 4021 5111 6170 7211 8234 9283 10809 12001 13273 14466 15658 16854 18046

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 16

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC LIGHT LOADING @ 1% INSTALLATION SAG SPAN

L

I

G

H

T

FEET 120 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 132 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 144 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.171 0.171 0.171 0.171 0.171 0.171 0.171 0.172 0.179 0.179 0.179 0.179 0.179 0.179 0.179

255 255 255 255 255 255 255 255 266 266 266 267 267 267 267

0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.701 0.701 0.701 0.701 0.701 0.701 0.701

17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.8 17.8 17.8 17.8 17.8 17.8 17.8

2070 2070 2070 2070 2070 2070 2070 2129 2467 2720 3100 3354 3607 3860 4114

9207 9207 9207 9207 9207 9207 9207 9470 10972 12099 13790 14918 16045 17172 18300

214 429 643 857 1072 1286 1501 1715 2011 2235 2462 2686 2911 3136 3360

952 1908 2860 3812 4768 5720 6677 7629 8945 9942 10952 11948 12949 13950 14946

0.6 0.7 0.8 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

371 650 906 1152 1392 1627 1858 2095 2440 2709 2995 3264 3533 3803 4072

1650 2891 4030 5124 6192 7237 8265 9319 10854 12050 13322 14519 15716 16917 18113

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.208 0.208 0.208 0.208 0.208 0.208 0.208 0.208 0.208 0.216 0.216 0.217 0.217 0.217

310 310 310 310 310 310 310 310 310 322 322 322 322 322

0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.780 0.780 0.780 0.780 0.780

19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.8 19.8 19.8 19.8 19.8

2070 2070 2070 2070 2070 2070 2188 2530 2783 3227 3607 3860 4241 4494

9207 9207 9207 9207 9207 9207 9734 11253 12381 14354 16045 17172 18863 19991

260 520 780 1040 1300 1560 1821 2081 2342 2704 2975 3248 3520 3792

1157 2313 3470 4626 5783 6939 8100 9257 10418 12028 13233 14448 15658 16868

0.7 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

415 734 1031 1318 1599 1875 2163 2476 2778 3194 3521 3835 4162

1846 3265 4586 5863 7113 8340 9622 11014 12357 14208 15662 17059 18513

457

0.217

323

0.780

19.8

4874

21682

4064

18078

0.9

4475 4802

19906 21360

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.209 0.209 0.209 0.209 0.209 0.209 0.209 0.209 0.209 0.217 0.217 0.218 0.218 0.218 0.218

311 311 311 311 311 311 311 311 311 324 324 324 324 324 324

0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.780 0.780 0.780 0.780 0.780 0.780

19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.8 19.8 19.8 19.8 19.8 19.8

2070 2070 2070 2070 2070 2070 2188 2530 2847 3227 3607 3860 4241 4494 4874

9207 9207 9207 9207 9207 9207 9734 11253 12663 14354 16045 17172 18863 19991 21682

261 523 784 1046 1307 1568 1830 2092 2354 2717 2990 3265 3538 3811 4084

1161 2326 3487 4653 5814 6975 8140 9306 10471 12086 13300 14523 15738 16952 18167

0.7 0.8 0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

416 736 1034 1322 1604 1882 2170 2484 2795 3205 3533 3848 4176 4489 4818

1850 3274 4599 5881 7135 8372 9653 11049 12433 14257 15716 17117 18576 19968 21432

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 17

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC LIGHT LOADING @ 1% INSTALLATION SAG SPAN

L

I

G

H

T

FEET 216 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 288 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 432 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.202 0.202 0.202 0.202 0.202 0.202 0.211 0.211 0.211 0.211 0.211 0.211 0.219 0.220 0.220

301 301 301 301 301 301 313 313 314 314 314 314 326 327 327

0.780 0.780 0.780 0.780 0.780 0.780 0.795 0.795 0.795 0.795 0.795 0.795 0.811 0.811 0.811

19.8 19.8 19.8 19.8 19.8 19.8 20.2 20.2 20.2 20.2 20.2 20.2 20.6 20.6 20.6

854 854 913 1250 1630 1884 2264 2517 2898 3151 3531 3785 4292 4689 5069

3797 3797 4060 5561 7252 8380 10071 11198 12889 14017 15708 16835 19090 20857 22548

253 505 758 1011 1264 1517 1843 2106 2371 2634 2899 3163 3564 3845 4121

1125 2246 3372 4497 5623 6748 8198 9368 10547 11717 12895 14070 15853 17103 18331

0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

353 635 911 1219 1533 1831 2208 2516 2839 3147 3470 3778 4238 4577 4909

1570 2825 4052 5422 6819 8145 9822 11192 12629 13999 15435 16805 18852 20360 21836

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.259 0.259 0.259 0.259 0.259 0.259 0.259 0.259 0.269 0.269 0.269 0.269 0.268 0.268

385 385 385 385 385 385 385 386 400 400 400 400 399 399

0.890 0.890 0.890 0.890 0.890 0.890 0.890 0.890 0.906 0.906 0.906 0.906 0.921 0.921

22.6 22.6 22.6 22.6 22.6 22.6 22.6 22.6 23.0 23.0 23.0 23.0 23.4 23.4

1296 1296 1296 1566 2072 2326 2706 3086 3593 3973 4354 4734 5069 5576

5763 5763 5763 6964 9219 10346 12037 13728 15983 17674 19365 21056 22548 24803

323 647 970 1294 1618 1942 2267 2591 3023 3360 3697 4034 4354 4691

1439 2878 4317 5757 7198 8639 10082 11525 13447 14945 16444 17943 19368 20865

0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

444 802 1146 1511 1901 2265 2643 3020 3507 3896 4284 4673 5062

1975 3569 5096 6723 8457 10077 11755 13434 15602 17330 19058 20787 22516

457

0.268

399

0.921

23.4

5956

26494

5027

22361

0.9

5464 5854

24307 26039

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.298 0.298 0.298 0.298 0.298 0.298 0.299 0.299 0.309 0.309 0.309 0.320 0.320 0.319 0.319

444 444 444 444 444 444 444 444 459 460 460 476 476 474 474

0.953 0.953 0.953 0.953 0.953 0.953 0.953 0.953 0.969 0.969 0.969 0.984 0.984 0.984 0.984

24.2 24.2 24.2 24.2 24.2 24.2 24.2 24.2 24.6 24.6 24.6 25.0 25.0 25.0 25.0

1296 1296 1296 1756 2326 2579 3086 3466 3973 4480 4860 5449 5956 6336 6970

5763 5763 5763 7810 10346 11474 13728 15419 17674 19929 21620 24239 26494 28185 31003

373 745 1118 1491 1865 2238 2612 2986 3473 3860 4247 4796 5197 5576 5977

1658 3316 4974 6634 8295 9956 11619 13281 15448 17170 18891 21333 23118 24804 26585

0.8 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9

487 890 1279 1708 2148 2558 2992 3415 3952 4398 4832 5433 5892 6321 6791

2168 3959 5689 7598 9554 11379 13310 15189 17580 19564 21496 24168 26208 28118 30207

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 18

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC MEDIUM LOADING @ 1% INSTALLATION SAG SPAN

M

E

D

I

U

M

FEET 12 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 24 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 36 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.080 0.080 0.080 0.080 0.080 0.084 0.084 0.084 0.085 0.090 0.090 0.090 0.090 0.090 0.090

119 119 119 119 120 125 126 126 126 134 134 134 134 134 134

0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.4 13.4

539 539 598 746 999 1189 1569 1569 1823 2076 2203 2456 2583 2837 3090

2398 2398 2661 3320 4444 5290 6981 6981 8108 9236 9799 10927 11490 12618 13745

100 201 301 401 502 632 738 844 951 1125 1238 1351 1464 1577 1691

446 892 1339 1785 2232 2812 3283 3752 4231 5005 5506 6010 6512 7016 7520

2.3 2.8 0.9 3.0 3.0 0.9 2.9 3.0 3.0 1.0 3.0 2.9 3.0 3.0 2.9

242 406 518 744 946 1055 1387 1536 1742 1825 2180 2391 2573 2783 2994

1074 1807 2304 3311 4206 4694 6168 6834 7751 8118 9698 10634 11444 12380 13316

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.081 0.081 0.081 0.081 0.081 0.085 0.085 0.085 0.086 0.091 0.091 0.091 0.091 0.091

121 121 121 121 121 127 127 127 127 136 136 136 136 136

0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.4

539 539 598 776 999 1189 1569 1696 1823 2076 2203 2456 2583 2837

2398 2398 2661 3452 4444 5290 6981 7545 8108 9236 9799 10927 11490 12618

102 203 305 407 508 640 747 854 963 1138 1252 1367 1481 1596

452 904 1356 1809 2262 2847 3324 3800 4284 5064 5571 6080 6588 7098

2.3 2.8 0.9 3.0 3.0 0.9 2.9 2.9 3.0 1.0 3.0 2.9 3.0 2.9

242 408 520 754 950 1060 1392 1571 1750 1833 2189 2400 2583

1078 1813 2314 3355 4224 4714 6192 6986 7782 8152 9737 10676 11490

457

0.091

136

0.528

13.4

3090

13745

1710

7608

2.9

2794 3006

12430 13369

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.082 0.082 0.082 0.082 0.082 0.086 0.086 0.087 0.087 0.092 0.092 0.092 0.092 0.092 0.092

123 123 123 123 123 129 129 129 129 137 137 137 137 137 137

0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.4 13.4

539 598 598 776 999 1189 1506 1823 1823 2076 2456 2456 2710 2837 3090

2398 2661 2661 3452 4444 5290 6699 8108 8108 9236 10927 10927 12054 12618 13745

103 206 309 412 515 648 756 867 975 1152 1268 1383 1499 1614 1730

458 916 1375 1833 2291 2882 3363 3857 4337 5124 5640 6152 6668 7179 7695

2.3 2.7 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9

243 420 572 757 953 1164 1384 1604 1757 2014 2252 2410 2621 2806 3017

1081 1868 2544 3367 4239 5178 6156 7135 7816 8959 10017 10720 11659 12482 13420

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 19

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC MEDIUM LOADING @ 1% INSTALLATION SAG SPAN

M

E

D

I

U

M

FEET 48 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 60 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 72 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.083 0.083 0.083 0.083 0.083 0.087 0.088 0.088 0.088 0.093 0.093 0.093 0.093 0.093 0.093

124 124 124 124 124 130 130 131 131 139 139 139 139 139 139

0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.4 13.4

539 598 598 776 999 1189 1506 1823 1823 2076 2456 2456 2710 2963 3090

2398 2661 2661 3452 4444 5290 6699 8108 8108 9236 10927 10927 12054 13182 13745

104 209 313 417 522 656 766 877 987 1165 1282 1399 1516 1633 1750

463 930 1392 1855 2322 2918 3407 3901 4390 5182 5703 6223 6744 7264 7784

2.3 2.7 3.0 3.0 3.0 3.0 2.9 2.9 2.9 1.0 2.9 2.9 2.9 2.9 2.9

244 421 574 761 957 1169 1390 1610 1764 1848 2261 2419 2632 2844 3029

1085 1873 2553 3385 4257 5200 6183 7162 7847 8220 10057 10760 11708 12651 13474

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.084 0.084 0.084 0.085 0.085 0.089 0.089 0.089 0.089 0.094 0.094 0.094 0.094 0.094

126 126 126 126 126 132 132 132 132 140 140 140 140 140

0.500 0.500 0.500 0.500 0.500 0.512 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.528

12.7 12.7 12.7 12.7 12.7 13.0 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.4

539 539 598 776 999 1189 1379 1569 1823 2076 2330 2456 2710 2963

2398 2398 2661 3452 4444 5290 6135 6981 8108 9236 10363 10927 12054 13182

106 211 317 423 528 664 775 886 999 1178 1296 1414 1533 1652

472 939 1410 1882 2349 2954 3447 3941 4444 5240 5765 6290 6819 7348

2.3 2.8 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.9 2.9 2.9

244 412 576 764 961 1174 1368 1562 1771 2030 2243 2429 2642

1085 1833 2562 3398 4275 5222 6085 6948 7878 9030 9977 10805 11752

457

0.094

140

0.528

13.4

3090

13745

1770

7873

2.9

2856 3042

12704 13531

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.100 0.100 0.100 0.100 0.100 0.108 0.108 0.108 0.109 0.109 0.109 0.109 0.109 0.109 0.115

148 148 148 148 149 161 161 161 161 162 162 162 162 162 171

0.535 0.535 0.535 0.535 0.535 0.559 0.559 0.559 0.559 0.559 0.559 0.559 0.559 0.559 0.575

13.6 13.6 13.6 13.6 13.6 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.6

854 854 854 854 1061 1314 1567 1884 2011 2264 2517 2644 2898 3151 3405

3797 3797 3797 3797 4719 5843 6970 8380 8943 10071 11198 11762 12889 14017 15144

125 249 374 499 624 813 949 1085 1221 1357 1495 1631 1768 1905 2153

556 1108 1664 2220 2776 3616 4221 4826 5431 6036 6650 7255 7864 8474 9577

2.1 2.5 2.7 2.9 2.9 2.9 2.9 2.8 2.9 2.8 2.8 2.9 2.9 2.8 2.8

290 489 668 836 1044 1310 1536 1775 1975 2201 2428 2628 2854 3080 3392

1290 2175 2971 3719 4644 5827 6832 7896 8785 9791 10800 11690 12695 13701 15088

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 20

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC MEDIUM LOADING @ 1% INSTALLATION SAG SPAN

M

E

D

I

U

M

FEET 84 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 96 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 108 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.131 0.131 0.131 0.131 0.131 0.131 0.131 0.131 0.138 0.138 0.138 0.138 0.138 0.138 0.145

195 195 195 195 195 195 195 195 205 205 205 206 206 206 216

0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.626 0.626 0.626 0.626 0.626 0.626 0.642

15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.9 15.9 15.9 15.9 15.9 15.9 16.3

1296 1296 1296 1296 1296 1473 1756 2009 2326 2579 2833 3086 3340 3593 3973

5763 5763 5763 5763 5763 6554 7810 8937 10346 11474 12601 13728 14856 15983 17674

164 328 492 656 820 984 1149 1313 1552 1725 1898 2072 2245 2418 2716

730 1459 2189 2918 3648 4377 5111 5841 6904 7673 8443 9217 9986 10756 12081

1.9 2.3 2.5 2.6 2.7 2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.7 2.7 2.7

354 602 826 1037 1240 1473 1726 1973 2291 2545 2799 3053 3307 3562 3938

1575 2678 3674 4613 5516 6552 7678 8776 10191 11321 12451 13580 14710 15845 17517

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.132 0.139 0.139 0.139 0.139 0.139 0.139

197 197 197 197 197 197 197 197 207 207 207 207 207 207

0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.626 0.626 0.626 0.626 0.626 0.626

15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.9 15.9 15.9 15.9 15.9 15.9

1296 1296 1296 1296 1296 1503 1756 2009 2326 2706 2833 3086 3340 3593

5763 5763 5763 5763 5763 6685 7810 8937 10346 12037 12601 13728 14856 15983

165 331 496 661 827 992 1158 1324 1564 1739 1913 2088 2262 2437

734 1472 2206 2940 3679 4413 5151 5889 6957 7735 8509 9288 10062 10840

1.9 2.3 2.5 2.6 2.7 2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.7 2.7

354 604 829 1041 1245 1484 1732 1980 2299 2577 2809 3064 3319

1575 2687 3688 4631 5538 6601 7704 8807 10226 11463 12495 13629 14764

457

0.146

217

0.642

16.3

3973

17674

2737

12175

2.7

3574 3952

15898 17579

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.178 0.178 0.178 0.178 0.178 0.186 0.186

254 254 254 254 254 254 254 254 265 265 265 265 265 276 276

0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.701 0.701 0.701 0.701 0.701 0.717 0.717

17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.8 17.8 17.8 17.8 17.8 18.2 18.2

2070 2070 2070 2070 2070 2070 2070 2340 2720 3100 3354 3734 3987 4367 4748

9207 9207 9207 9207 9207 9207 9207 10408 12099 13790 14918 16609 17736 19427 21118

213 426 639 852 1065 1278 1491 1704 2000 2225 2448 2671 2894 3248 3481

947 1895 2842 3790 4737 5685 6632 7580 8896 9897 10889 11881 12873 14448 15484

1.8 2.0 2.2 2.4 2.5 2.5 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6

436 748 1030 1297 1554 1805 2050 2339 2713 3029 3323 3638 3933 4355 4678

1939 3327 4582 5769 6913 8029 9119 10404 12068 13474 14781 16183 17495 19372 20809

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 21

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC MEDIUM LOADING @ 1% INSTALLATION SAG SPAN

M

E

D

I

U

M

FEET 120 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 132 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 144 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.171 0.171 0.171 0.171 0.171 0.171 0.171 0.179 0.179 0.179 0.179 0.179 0.179 0.187 0.187

255 255 255 255 255 255 255 266 266 266 267 267 267 278 278

0.685 0.685 0.685 0.685 0.685 0.685 0.685 0.701 0.701 0.701 0.701 0.701 0.701 0.717 0.717

17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.8 17.8 17.8 17.8 17.8 17.8 18.2 18.2

2070 2070 2070 2070 2070 2070 2070 2467 2783 3100 3354 3734 4114 4621 4748

9207 9207 9207 9207 9207 9207 9207 10972 12381 13790 14918 16609 18300 20554 21118

214 429 643 857 1072 1286 1501 1788 2012 2238 2463 2687 2912 3267 3501

952 1908 2860 3812 4768 5720 6677 7953 8950 9955 10956 11952 12953 14532 15573

1.8 2.0 2.2 2.4 2.5 2.5 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.6

437 749 1033 1301 1559 1810 2057 2427 2732 3039 3334 3650 3966 4409 4693

1944 3332 4595 5787 6935 8051 9150 10796 12153 13518 14830 16236 17642 19612 20876

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.208 0.208 0.208 0.208 0.208 0.208 0.208 0.208 0.216 0.216 0.217 0.217 0.217 0.217

310 310 310 310 310 310 310 310 322 322 322 322 322 323

0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.780 0.780 0.780 0.780 0.780 0.780

19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.8 19.8 19.8 19.8 19.8 19.8

2070 2070 2070 2070 2070 2070 2467 2720 3227 3607 3860 4241 4621 5001

9207 9207 9207 9207 9207 9207 10972 12099 14354 16045 17172 18863 20554 22246

260 520 780 1040 1300 1560 1821 2081 2433 2704 2978 3249 3521 3793

1157 2313 3470 4626 5783 6939 8100 9257 10823 12028 13247 14452 15662 16872

1.8 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

476 826 1146 1451 1748 2038 2386 2712 3153 3507 3844 4198 4553

2117 3674 5098 6454 7775 9065 10613 12064 14025 15600 17099 18674 20253

457

0.225

335

0.795

20.2

5508

24500

4220

18771

2.4

4908 5411

21832 24069

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.209 0.209 0.209 0.209 0.209 0.209 0.209 0.209 0.217 0.217 0.218 0.218 0.218 0.218 0.226

311 311 311 311 311 311 311 311 324 324 324 324 324 324 337

0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.764 0.780 0.780 0.780 0.780 0.780 0.780 0.795

19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.4 19.8 19.8 19.8 19.8 19.8 19.8 20.2

2070 2070 2070 2070 2070 2070 2467 2783 3227 3607 3860 4241 4621 5001 5508

9207 9207 9207 9207 9207 9207 10972 12381 14354 16045 17172 18863 20554 22246 24500

261 523 784 1046 1307 1568 1830 2093 2446 2718 2993 3266 3539 3812 4241

1161 2326 3487 4653 5814 6975 8140 9310 10880 12090 13314 14528 15742 16957 18865

1.8 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4

477 827 1149 1455 1753 2044 2393 2730 3162 3517 3855 4211 4566 4922 5427

2122 3679 5111 6472 7798 9092 10645 12144 14065 15644 17148 18731 20311 21894 24140

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 22

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC MEDIUM LOADING @ 1% INSTALLATION SAG SPAN

M

E

D

I

U

M

FEET 216 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 288 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 432 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.202 0.202 0.202 0.202 0.202 0.202 0.211 0.211 0.211 0.211 0.211 0.219 0.220 0.220 0.220

301 301 301 301 301 301 313 314 314 314 314 326 327 327 327

0.780 0.780 0.780 0.780 0.780 0.780 0.795 0.795 0.795 0.795 0.795 0.811 0.811 0.811 0.811

19.8 19.8 19.8 19.8 19.8 19.8 20.2 20.2 20.2 20.2 20.2 20.6 20.6 20.6 20.6

854 854 1002 1377 1884 2011 2517 2771 3151 3658 3785 4292 4689 5069 5576

3797 3797 4455 6125 8380 8943 11198 12326 14017 16271 16835 19090 20857 22548 24803

253 505 758 1011 1264 1518 1843 2107 2371 2636 2899 3290 3570 3846 4125

1125 2246 3372 4497 5623 6752 8198 9372 10547 11726 12895 14635 15880 17108 18349

2.1 2.4 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

394 694 1000 1341 1701 2003 2423 2754 3104 3473 3784 4259 4624 4984 5364

1753 3087 4448 5965 7566 8910 10778 12250 13807 15449 16832 18945 20569 22170 23860

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.259 0.259 0.259 0.259 0.259 0.259 0.259 0.259 0.269 0.269 0.269 0.268 0.268 0.268

385 385 385 385 385 385 386 386 400 400 400 399 399 399

0.890 0.890 0.890 0.890 0.890 0.890 0.890 0.890 0.906 0.906 0.906 0.921 0.921 0.921

22.6 22.6 22.6 22.6 22.6 22.6 22.6 22.6 23.0 23.0 23.0 23.4 23.4 23.4

1296 1296 1296 1692 2072 2579 2833 3340 3847 4227 4734 5069 5449 5829

5763 5763 5763 7528 9219 11474 12601 14856 17111 18802 21056 22548 24239 25930

323 647 970 1294 1618 1943 2267 2593 3024 3360 3698 4019 4355 4692

1439 2878 4317 5757 7198 8641 10083 11534 13450 14948 16448 17879 19373 20869

2.0 2.2 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4

488 866 1222 1625 2026 2444 2828 3248 3757 4168 4597 5002 5415

2172 3851 5437 7229 9013 10872 12580 14447 16710 18542 20450 22252 24085

457

0.267

397

0.921

23.4

6336

28185

5005

22265

2.4

5827 6239

25918 27750

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.298 0.298 0.298 0.298 0.298 0.298 0.299 0.309 0.309 0.309 0.320 0.320 0.319 0.319 0.319

444 444 444 444 444 444 444 459 459 460 476 476 474 474 474

0.953 0.953 0.953 0.953 0.953 0.953 0.953 0.969 0.969 0.969 0.984 0.984 0.984 0.984 0.984

24.2 24.2 24.2 24.2 24.2 24.2 24.2 24.6 24.6 24.6 25.0 25.0 25.0 25.0 25.0

1296 1296 1384 1819 2326 2833 3340 3973 4227 4734 5322 5829 6336 6716 7223

5763 5763 6158 8091 10346 12601 14856 17674 18802 21056 23675 25930 28185 29876 32131

373 745 1118 1491 1865 2238 2612 3087 3473 3861 4396 4797 5178 5577 5977

1658 3316 4974 6634 8295 9957 11620 13732 15451 17172 19554 21338 23032 24809 26589

2.0 2.2 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3

529 949 1360 1811 2270 2730 3190 3752 4192 4663 5273 5756 6223 6690 7173

2355 4221 6050 8054 10098 12143 14188 16689 18648 20744 23456 25605 27683 29760 31906

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 23

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC HEAVY LOADING @ 1% INSTALLATION SAG SPAN

H

E

A

V

Y

FEET 12 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 24 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 36 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.080 0.080 0.080 0.084 0.084 0.085 0.090 0.090 0.090 0.090 0.093 0.093 0.102 0.102 0.102

119 119 119 125 126 126 134 134 134 134 138 138 151 152 152

0.500 0.500 0.500 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.535 0.535 0.559 0.559 0.559

12.7 12.7 12.7 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.6 13.6 14.2 14.2 14.2

539 598 936 1189 1506 1823 2076 2456 2710 2963 3344 3597 4104 4309 4689

2398 2661 4162 5290 6699 8108 9236 10927 12054 13182 14873 16000 18255 19166 20857

100 201 301 421 527 634 788 901 1014 1127 1278 1395 1652 1783 1915

446 892 1339 1875 2345 2821 3503 4006 4509 5012 5687 6207 7349 7933 8517

3.5 4.1 4.1 4.2 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1

335 569 864 1152 1445 1739 2052 2367 2649 2931 3276 3561 4017 4300 4628

1492 2533 3844 5125 6429 7737 9127 10530 11785 13040 14572 15839 17869 19125 20585

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.081 0.081 0.081 0.085 0.085 0.086 0.091 0.091 0.091 0.091 0.094 0.094 0.103 0.103

121 121 121 127 127 127 136 136 136 136 140 140 153 153

0.500 0.500 0.500 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.535 0.535 0.559 0.559

12.7 12.7 12.7 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.6 13.6 14.2 14.2

539 598 936 1189 1506 1823 2076 2456 2837 2963 3344 3724 4231 4435

2398 2661 4162 5290 6699 8108 9236 10927 12618 13182 14873 16564 18819 19729

102 203 305 427 534 642 797 911 1026 1140 1293 1411 1670 1802

452 904 1357 1898 2374 2856 3545 4054 4563 5071 5752 6278 7427 8017

3.5 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.0 4.1

336 571 866 1155 1449 1743 2057 2373 2689 2938 3284 3602 4059

1495 2539 3853 5137 6445 7755 9149 10555 11960 13071 14606 16025 18055

457

0.103

154

0.559

14.2

4689

20857

1935

8605

4.1

4343 4638

19317 20633

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.082 0.082 0.082 0.086 0.086 0.087 0.092 0.092 0.092 0.092 0.095 0.095 0.104 0.104 0.104

123 123 123 129 129 129 137 137 137 137 142 142 154 155 155

0.500 0.500 0.500 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.535 0.535 0.559 0.559 0.559

12.7 12.7 12.7 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.6 13.6 14.2 14.2 14.2

539 598 936 1189 1506 1823 2076 2456 2710 3090 3470 3597 4104 4435 4689

2398 2661 4162 5290 6699 8108 9236 10927 12054 13745 15436 16000 18255 19729 20857

103 206 309 432 540 650 806 922 1038 1154 1308 1427 1687 1821 1954

458 916 1375 1922 2402 2891 3585 4101 4617 5133 5818 6348 7504 8100 8692

3.5 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1

337 572 868 1158 1452 1748 2062 2379 2662 2979 3324 3578 4036 4353 4649

1499 2544 3861 5151 6459 7775 9172 10582 11841 13251 14786 15916 17953 19363 20680

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 24

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC HEAVY LOADING @ 1% INSTALLATION SAG SPAN

H

E

A

V

Y

FEET 48 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 60 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 72 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.083 0.083 0.083 0.087 0.088 0.088 0.093 0.093 0.093 0.093 0.096 0.096 0.105 0.105 0.105

124 124 124 130 130 131 139 139 139 139 143 143 156 156 157

0.500 0.500 0.500 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.535 0.535 0.559 0.559 0.559

12.7 12.7 12.7 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.6 13.6 14.2 14.2 14.2

539 598 936 1189 1506 1823 2076 2456 2710 3090 3470 3724 4104 4435 4689

2398 2661 4162 5290 6699 8108 9236 10927 12054 13745 15436 16564 18255 19729 20857

104 209 313 437 547 658 815 932 1049 1167 1322 1443 1704 1839 1974

463 930 1392 1944 2433 2927 3625 4146 4666 5191 5881 6419 7580 8180 8781

3.5 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1

338 574 870 1160 1456 1752 2067 2384 2668 2986 3332 3620 4045 4363 4660

1503 2553 3870 5160 6477 7793 9194 10605 11868 13282 14821 16103 17993 19408 20729

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.084 0.084 0.085 0.089 0.089 0.089 0.094 0.094 0.094 0.094 0.097 0.097 0.106 0.106

126 126 126 132 132 132 140 140 140 140 145 145 158 158

0.500 0.500 0.500 0.512 0.512 0.512 0.528 0.528 0.528 0.528 0.535 0.535 0.559 0.559

12.7 12.7 12.7 13.0 13.0 13.0 13.4 13.4 13.4 13.4 13.6 13.6 14.2 14.2

539 598 936 1189 1569 1823 2076 2456 2710 2963 3344 3597 4104 4435

2398 2661 4162 5290 6981 8108 9236 10927 12054 13182 14873 16000 18255 19729

106 211 317 443 554 666 825 943 1061 1180 1337 1459 1721 1858

472 939 1410 1971 2464 2963 3670 4195 4720 5249 5947 6490 7655 8265

3.5 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.0

338 575 872 1163 1476 1756 2072 2390 2675 2960 3307 3595 4055

1503 2558 3879 5173 6566 7811 9217 10631 11899 13167 14710 15991 18038

457

0.106

158

0.559

14.2

4689

20857

1994

8870

4.1

4373 4671

19452 20778

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.100 0.100 0.100 0.108 0.108 0.108 0.109 0.109 0.109 0.109 0.115 0.115 0.115 0.115 0.123

148 148 148 161 161 161 162 162 162 162 171 171 171 171 183

0.535 0.535 0.535 0.559 0.559 0.559 0.559 0.559 0.559 0.559 0.575 0.575 0.575 0.575 0.594

13.6 13.6 13.6 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.6 14.6 14.6 14.6 15.1

854 854 913 1314 1567 1884 2264 2644 2898 3151 3531 3911 4292 4545 5069

3797 3797 4060 5843 6970 8380 10071 11762 12889 14017 15708 17399 19090 20217 22548

125 249 374 542 678 814 950 1088 1224 1361 1579 1723 1870 2015 2308

556 1108 1664 2411 3016 3621 4226 4840 5445 6054 7024 7664 8318 8963 10266

3.1 3.7 4.1 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9

400 662 907 1267 1565 1879 2210 2541 2839 3138 3531 3867 4205 4509 4994

1779 2945 4035 5636 6961 8358 9831 11303 12629 13959 15707 17201 18705 20057 22214

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 25

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC HEAVY LOADING @ 1% INSTALLATION SAG SPAN

H

E

A

V

Y

FEET 84 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 96 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 108 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.131 0.131 0.131 0.131 0.131 0.131 0.138 0.138 0.138 0.138 0.145 0.145 0.145 0.148 0.148

195 195 195 195 195 195 205 205 206 206 216 216 216 220 220

0.610 0.610 0.610 0.610 0.610 0.610 0.626 0.626 0.626 0.626 0.642 0.642 0.642 0.661 0.661

15.5 15.5 15.5 15.5 15.5 15.5 15.9 15.9 15.9 15.9 16.3 16.3 16.3 16.8 16.8

1296 1296 1296 1384 1756 2072 2453 2833 3213 3593 3973 4354 4734 5196 5576

5763 5763 5763 6158 7810 9219 10910 12601 14292 15983 17674 19365 21056 23112 24803

164 328 492 656 821 985 1208 1381 1554 1727 1992 2174 2356 2587 2773

730 1459 2189 2918 3652 4381 5373 6143 6913 7682 8861 9670 10480 11508 12335

2.8 3.3 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.8 3.8 3.8 3.8

483 803 1085 1369 1718 2053 2448 2806 3163 3521 3948 4312 4676 5115 5483

2148 3572 4826 6090 7642 9132 10889 12482 14070 15662 17562 19181 20800 22753 24390

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.132 0.132 0.132 0.132 0.132 0.132 0.139 0.139 0.139 0.139 0.146 0.146 0.146 0.149

197 197 197 197 197 197 207 207 207 207 217 217 217 222

0.610 0.610 0.610 0.610 0.610 0.610 0.626 0.626 0.626 0.626 0.642 0.642 0.642 0.661

15.5 15.5 15.5 15.5 15.5 15.5 15.9 15.9 15.9 15.9 16.3 16.3 16.3 16.8

1296 1296 1296 1384 1756 2072 2579 2833 3213 3593 3973 4480 4734 5196

5763 5763 5763 6158 7810 9219 11474 12601 14292 15983 17674 19929 21056 23112

165 331 496 662 827 993 1217 1391 1566 1741 2007 2191 2374 2606

734 1472 2206 2945 3679 4417 5413 6187 6966 7744 8928 9746 10560 11592

2.8 3.3 3.7 3.9 3.9 3.9 3.8 3.9 3.9 3.9 3.8 3.8 3.8 3.8

483 805 1088 1372 1722 2058 2484 2812 3170 3528 3957 4352 4686

2148 3581 4840 6103 7660 9154 11049 12508 14101 15693 17602 19359 20844

457

0.149

222

0.661

16.8

5576

24803

2793

12424

3.8

5126 5495

22802 24443

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.170 0.170 0.170 0.170 0.170 0.170 0.178 0.178 0.178 0.178 0.186 0.186 0.186 0.186 0.188

254 254 254 254 254 254 265 265 265 265 276 276 276 277 279

0.685 0.685 0.685 0.685 0.685 0.685 0.701 0.701 0.701 0.701 0.717 0.717 0.717 0.717 0.748

17.4 17.4 17.4 17.4 17.4 17.4 17.8 17.8 17.8 17.8 18.2 18.2 18.2 18.2 19.0

2070 2070 2070 2070 2070 2340 2847 3227 3607 3987 4494 5001 5381 5761 6336

9207 9207 9207 9207 9207 10408 12663 14354 16045 17736 19991 22246 23937 25628 28185

213 426 639 852 1065 1278 1556 1780 2003 2226 2552 2785 3019 3252 3518

947 1895 2842 3790 4737 5685 6921 7918 8910 9902 11352 12388 13429 14466 15649

2.5 2.9 3.3 3.5 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7

589 986 1337 1662 1972 2334 2799 3195 3589 3984 4487 4917 5320 5722 6235

2620 4386 5947 7393 8772 10382 12451 14212 15965 17722 19959 21872 23665 25453 27735

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 26

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC HEAVY LOADING @ 1% INSTALLATION SAG SPAN

H

E

A

V

Y

FEET 120 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 132 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 144 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.171 0.171 0.171 0.171 0.171 0.172 0.179 0.179 0.179 0.179 0.187 0.187 0.187 0.187 0.189

255 255 255 255 255 255 266 266 267 267 278 278 278 278 281

0.685 0.685 0.685 0.685 0.685 0.685 0.701 0.701 0.701 0.701 0.717 0.717 0.717 0.717 0.748

17.4 17.4 17.4 17.4 17.4 17.4 17.8 17.8 17.8 17.8 18.2 18.2 18.2 18.2 19.0

2070 2070 2070 2070 2070 2340 2847 3227 3607 4114 4621 5001 5381 5761 6336

9207 9207 9207 9207 9207 10408 12663 14354 16045 18300 20554 22246 23937 25628 28185

214 429 643 857 1072 1287 1565 1791 2015 2240 2567 2802 3036 3271 3539

952 1908 2860 3812 4768 5725 6961 7967 8963 9964 11419 12464 13505 14550 15742

2.5 2.9 3.3 3.5 3.7 3.7 3.7 3.7 3.7 3.7 3.6 3.6 3.7 3.7 3.7

590 988 1339 1666 1976 2339 2805 3201 3597 4021 4524 4928 5331 5734 6247

2624 4395 5956 7411 8790 10404 12477 14239 16000 17886 20124 21921 23713 25506 27788

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.208 0.208 0.208 0.208 0.208 0.208 0.216 0.216 0.217 0.217 0.217 0.225 0.221 0.220

310 310 310 310 310 310 322 322 322 322 323 335 328 327

0.764 0.764 0.764 0.764 0.764 0.764 0.780 0.780 0.780 0.780 0.780 0.795 0.811 0.811

19.4 19.4 19.4 19.4 19.4 19.4 19.8 19.8 19.8 19.8 19.8 20.2 20.6 20.6

2070 2070 2070 2070 2188 2657 3227 3607 4114 4494 5001 5508 5956 6463

9207 9207 9207 9207 9734 11817 14354 16045 18300 19991 22246 24500 26494 28749

260 520 780 1040 1300 1561 1893 2164 2437 2708 2980 3376 3584 3844

1157 2313 3470 4626 5783 6944 8420 9626 10840 12046 13256 15017 15942 17099

2.5 2.9 3.2 3.5 3.6 3.6 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5

631 1064 1450 1811 2183 2626 3147 3580 4041 4474 4935 5493 5921

2807 4733 6450 8056 9710 11681 13999 15925 17975 19901 21952 24434 26338

457

0.220

327

0.811

20.6

6843

30440

4120

18327

3.6

6377 6816

28366 30319

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.209 0.209 0.209 0.209 0.209 0.209 0.217 0.217 0.218 0.218 0.218 0.226 0.222 0.221 0.221

311 311 311 311 311 311 324 324 324 324 324 337 330 329 329

0.764 0.764 0.764 0.764 0.764 0.764 0.780 0.780 0.780 0.780 0.780 0.795 0.811 0.811 0.811

19.4 19.4 19.4 19.4 19.4 19.4 19.8 19.8 19.8 19.8 19.8 20.2 20.6 20.6 20.6

2070 2070 2070 2070 2188 2657 3227 3607 4114 4494 5001 5508 6083 6463 6843

9207 9207 9207 9207 9734 11817 14354 16045 18300 19991 22246 24500 27057 28749 30440

261 523 784 1046 1307 1569 1902 2175 2449 2722 2995 3392 3602 3863 4141

1161 2326 3487 4653 5814 6979 8461 9675 10894 12108 13322 15088 16022 17183 18420

2.5 2.9 3.2 3.4 3.6 3.6 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.6

632 1065 1452 1815 2187 2631 3153 3587 4049 4483 4944 5504 5960 6389 6829

2811 4737 6459 8074 9728 11703 14025 15956 18011 19941 21992 24483 26511 28420 30377

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 27

Fiber Optic Cable

All-Dielectric Self-Supporting (AFL-ADSS®) Fiber Optic Cable NESC HEAVY LOADING @ 1% INSTALLATION SAG SPAN

H

E

A

V

Y

FEET 216 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 288 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 432 FIBERS 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500

WEIGHT

DIAMETER

MRCL

UNLOADED LBS N

INITIAL TENSION LOADED SAG % LBS

METERS

LBS/FT

KG/KM

INCHES

MM

LBS

N

N

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.202 0.202 0.202 0.202 0.211 0.211 0.211 0.211 0.211 0.219 0.220 0.220 0.229 0.228 0.228

301 301 301 301 313 314 314 314 314 326 327 327 340 339 339

0.780 0.780 0.780 0.780 0.795 0.795 0.795 0.795 0.795 0.811 0.811 0.811 0.827 0.827 0.827

19.8 19.8 19.8 19.8 20.2 20.2 20.2 20.2 20.2 20.6 20.6 20.6 21.0 21.0 21.0

854 913 1314 1884 2264 2771 3151 3658 4038 4545 5069 5576 6083 6590 6970

3797 4060 5843 8380 10071 12326 14017 16271 17963 20217 22548 24803 27057 29312 31003

253 505 758 1012 1316 1580 1844 2108 2373 2742 3022 3300 3716 3983 4269

1125 2246 3372 4502 5854 7028 8203 9377 10556 12197 13443 14679 16530 17717 18989

3.1 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.5 3.5 3.5

505 875 1300 1762 2224 2681 3111 3568 3998 4538 5010 5477 6053 6515 6962

2246 3892 5783 7838 9893 11926 13838 15871 17784 20186 22286 24363 26925 28980 30969

30 61 91 122 152 183 213 244 274 305 335 366 396 427

0.259 0.259 0.259 0.259 0.259 0.259 0.269 0.269 0.269 0.268 0.268 0.268 0.267 0.277

385 385 385 385 385 386 400 400 400 399 399 399 397 412

0.890 0.890 0.890 0.890 0.890 0.890 0.906 0.906 0.906 0.921 0.921 0.921 0.921 0.937

22.6 22.6 22.6 22.6 22.6 22.6 23.0 23.0 23.0 23.4 23.4 23.4 23.4 23.8

1296 1296 1566 2072 2579 3086 3720 4227 4734 5196 5703 6209 6716 7477

5763 5763 6964 9219 11474 13728 16547 18802 21056 23112 25366 27621 29876 33258

323 647 971 1295 1619 1943 2351 2688 3025 3350 3686 4022 4339 4845

1439 2878 4317 5759 7201 8644 10460 11958 13457 14900 16396 17892 19301 21552

2.8 3.3 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4

619 1061 1522 2027 2532 3037 3633 4148 4663 5176 5692 6208 6711

2753 4720 6771 9016 11262 13509 16163 18453 20744 23026 25321 27616 29854

457

0.277

412

0.937

23.8

7984

35513

5193

23098

3.4

7412 7938

32972 35308

30 61 91 122 152 183 213 244 274 305 335 366 396 427 457

0.298 0.298 0.298 0.298 0.298 0.299 0.309 0.309 0.320 0.320 0.319 0.319 0.329 0.329 0.329

444 444 444 444 444 444 459 460 476 476 474 474 490 490 490

0.953 0.953 0.953 0.953 0.953 0.953 0.969 0.969 0.984 0.984 0.984 0.984 1.000 1.000 1.000

24.2 24.2 24.2 24.2 24.2 24.2 24.6 24.6 25.0 25.0 25.0 25.0 25.4 25.4 25.4

1296 1296 1692 2326 2833 3340 3973 4607 5322 5829 6463 6970 7730 8364 8997

5763 5763 7528 10346 12601 14856 17674 20493 23675 25930 28749 31003 34385 37204 40022

373 745 1118 1492 1865 2239 2701 3088 3597 3997 4382 4781 5350 5764 6178

1658 3316 4975 6636 8298 9960 12015 13737 15999 17781 19490 21268 23799 25639 27479

2.8 3.2 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.3 3.2 3.2 3.2

659 1140 1665 2233 2778 3322 3962 4541 5233 5800 6379 6945 7695 8295 8896

2931 5070 7405 9932 12356 14779 17625 20202 23279 25800 28374 30891 34229 36899 39570

* Initial tension indicates tension before 10 year creep.

© 2002, AFL, all rights reserved. PP-1-00022, Revision 3, 1.3.14 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 28

Wire Products

Alumoweld® Wire and Strand Alumoweld wire consists of a thick cladding of pure aluminum over a high-strength steel core. Alumoweld wire offers the advantages of each metal. It is ideal for overhead ground wire, neutral messengers, line wire and guy strand. Alumoweld wire and strand is used by power utilities, as well as formed wire and optical ground wire manufacturers. Alumoweld outlasts other options by as much as 200% in corrosive environments, significantly lowering maintenance and replacement costs. When compared to solid aluminum wire, Alumoweld offers tremendous savings. How is Alumoweld made?

Applications • Utility Market • Telecommunications Market • Military • General Industry Applications

The Alumoweld process consists of a continuous application of a pure atomized aluminum powder to a high strength steel rod. Proper control of heat and pressure refines the cladding and develops a controlled atomic weld. The resulting bimetallic rod is then cold drawn into finished wire sizes without changing original proportions of aluminum and steel. Features Thick Aluminum Covering Alumoweld wire is produced with the concentric aluminum covering comprising 25% of the cross-sectional area, with the aluminum thickness 10% minimum of the wire radius. The high proportion of aluminum offers an excellent degree of electrical conductivity and permanently protects the high strength steel core. High Conductivity Compared to solid aluminum wire of the same diameter, Alumoweld wire has a direct current conductance of 33%. It has about three times the conductivity of galvanized steel wire. For high frequency currents where “skin effect” is a factor, the conductivity of Alumoweld wire approaches 100% of solid aluminum. When Alumoweld wires are combined with aluminum wires in composite conductors, a wide range of strength and conductivity characteristics is possible. Corrosion Resistance The thick aluminum cladding of Alumoweld wire provides a high degree of corrosion resistance, resulting in longer service life and reduced maintenance. Accelerated laboratory tests exposing Alumoweld wire to various types of corrosive conditions have proven that Alumoweld wires have corrosion resistance comparable to EC grade aluminum. The conditions simulated in the test included industrial, marine and tropical. Combines High Strength with Low Weight Alumoweld wire has a higher strength-to-weight ratio than any other wire commonly used on overhead lines. Size for size, it has about the same tensile strength as extra high strength steel wire, but weighs less. It has eight times the strength of solid aluminum wire of the same diameter and only a little more than twice the weight. This high strength-toweight ratio provides a maximum margin of safety for long-span construction. The strength of Alumoweld’s steel core is protected by the thick aluminum covering.

www.AFLglobal.com or 800-866-7385 29

© 2003, AFL, all rights reserved. PP-3-00778, Revision 3, 3.6.14 Specifications are subject to change without notice.

Wire Products

Alumoweld® Overhead Ground Wire Alumoweld wire and strand is used by power utilities, as well as formed wire and optical ground wire manufacturers. Alumoweld outlasts other options by as much as 200% in corrosive environments, significantly lowering maintenance and replacement costs. When compared to solid aluminum wire, Alumoweld offers tremendous savings. Features Corrosion Resistance Alumoweld overhead ground wire has excellent corrosion resistance. Its strength and conductivity remain unchanged in any atmosphere where aluminum is satisfactory, especially those known to be corrosive from industrial or atmospheric conditions.

Applications • Overhead ground wire • Shield wire protecting transmission lines against lightning damage

This assurance against corrosion is obtained through the application of a thick covering of pure aluminum, which provides a substantial barrier of protective metal. The minimum cladding thickness of Alumoweld is 10% of the radius of the wire. The cladding has a continuous, strong metallic bond to the steel core that will not crack or flake. Strength Comparable to Steel Alumoweld also provides strength greater than or comparable to other overhead ground wires. For commonly used wire sizes, the tensile strength of the individual wire can approach 200,000 pounds per square inch. When used in a strand for overhead ground wire, this high strength permits greater span lengths, less sag, and heavier loads under storm loading conditions. Lightweight Directly related to strength and sag performance is the lighter weight of Alumoweld. Due to its thick cladding of aluminum, Alumoweld is 15% lighter than a steel strand of equivalent size. This lighter weight, combined with high strength, permits Alumoweld to be installed to the same sags as steel with correspondingly lower tensions and lower stresses on the towers or supporting structures.

www.AFLglobal.com or 800-866-7385 30

© 2003, AFL, all rights reserved. PP-3-00778, Revision 3, 3.6.14 Specifications are subject to change without notice.

Wire Products

Alumoweld® Overhead Ground Wire (cont.) ALUMOWELD STRAND ASTM B-416 NUMBER & NOMINAL NOMINAL STRAND SIZE OF WIRE DIAMETER WIRES DIAMETER

BREAKING LOAD

CROSS SECTION

OHMS/1000 FT@68ºF 0.05356 0.06754 0.08516 0.10740 0.13540 0.08224 0.10370 0.13080 0.16490 0.20790 0.26220 0.22640 0.28030 0.35350 0.44580 0.56210 0.70880 0.89380 1.12700 0.51770 0.65280 0.82320 1.03800 1.30900 1.65100

OHMS/ KM@20ºC 0.1757 0.2216 0.2794 0.3523 0.4443 0.2698 0.3402 0.4290 0.5409 0.6821 0.8601 0.7426 0.9198 1.1600 1.4630 1.8440 2.3250 2.9320 3.6970 1.6990 2.1420 2.7010 3.4060 4.2940 5.4150

SQ IN

MM2

54,500 45,690 38,190 30,290 24,020 33,270 27,990 23,460 19,610 15,550 12,330 12,260 10,310 8,645 7,226 5,729 4,545 3,604 2,858 5,547 4,663 3,910 3,269 2,592 2,056

KG/ KM 3307.0 2623.0 2080.0 1649.0 1308.0 2129.0 1688.0 1339.0 1062.0 842.0 667.7 781.1 619.5 491.1 389.6 308.9 245.1 194.4 154.2 334.1 265.0 210.1 166.7 132.2 104.8

0.76264 0.60509 0.47984 0.38032 0.30174 0.49438 0.39163 0.31073 0.24641 0.19530 0.15495 0.18193 0.14435 0.11448 0.09077 0.07198 0.05708 0.04527 0.03590 0.07796 0.06185 0.04905 0.03890 0.03085 0.02446

492.20 390.30 309.50 245.50 194.70 318.70 252.70 200.40 158.90 126.10 99.96 117.40 93.10 73.87 58.56 46.44 36.83 29.21 23.16 50.32 39.90 31.65 25.10 19.90 15.78

2,305 1,946 1,637 1,372 1,147 909 721 572 454

93.63 74.25 58.88 46.69 37.03 29.37 23.29 18.47 14.65

139.3 110.5 87.6 69.5 55.1 43.7 34.7 27.5 21.8

1.222 1.541 1.943 2.450 3.089 3.896 4.912 6.194 7.811

4.009 5.056 6.375 8.038 10.130 12.780 16.120 20.320 25.630

0.03278 0.02599 0.02062 0.01635 0.01297 0.01028 0.00816 0.00647 0.00513

21.15 16.77 13.30 10.55 8.37 6.63 5.26 4.17 3.31

IN

MM

IN

MM

LB

KG

37 No. 6 37 No. 7 37 No. 8 37 No. 9 37 No.10 19 No. 5 19 No. 6 19 No. 7 19 No. 8 19 No. 9 19 No.10 7 No. 5 7 No. 6 7 No. 7 7 No. 8 7 No. 9 7 No.10 7 No.11 7 No.12 3 No. 5 3 No. 6 3 No. 7 3 No. 8 3 No. 9 3 No.10

0.1620 0.1443 0.1285 0.1144 0.1019 0.1819 0.1620 0.1443 0.1285 0.1144 0.1019 0.1819 0.1620 0.1443 0.1285 0.1144 0.1019 0.0907 0.0808 0.1819 0.1620 0.1443 0.1285 0.1144 0.1019

4.115 3.665 3.264 2.906 2.588 4.620 4.115 3.665 3.264 2.906 2.588 4.620 4.115 3.665 3.264 2.906 2.588 2.304 2.052 4.620 4.115 3.665 3.264 2.906 2.588

1.130 1.010 0.899 0.801 0.713 0.910 0.810 0.721 0.642 0.572 0.509 0.546 0.486 0.433 0.385 0.343 0.306 0.272 0.242 0.392 0.349 0.311 0.277 0.247 0.220

28.80 25.70 22.90 20.30 17.90 23.10 20.60 18.30 16.30 14.50 12.90 13.90 12.40 11.00 9.78 8.71 7.76 6.91 6.16 9.96 8.87 7.90 7.03 6.26 5.58

120,200 100,700 84,200 66,770 52,950 73,350 61,700 51,730 43,240 34,290 27,190 27,030 22,730 19,060 15,930 12,630 10,020 7,945 6,301 12,230 10,280 8,621 7,206 5,715 4,532

109.0 116.0 123.0 130.1 137.1 137.1 137.1 137.1 137.1

5,081 4,290 3,608 3,025 2,529 2,005 1,590 1,261 1,000

115 165 175 185 195 195 195 195 195

RESISTANCE

LB/1000 FT 2222.00 1762.00 1398.00 1108.00 879.00 1430.00 1134.00 899.50 713.50 565.80 448.70 524.90 416.30 330.00 261.80 207.60 164.70 130.60 103.60 224.50 178.10 141.20 112.00 88.81 70.43

AWG

ALUMOWELD STRAND ASTM B-415 No. 4 0.2043 5.189 No. 5 0.1819 4.620 No. 6 0.1620 4.115 No. 7 0.1443 3.665 No. 8 0.1285 3.264 No. 9 0.1144 2.906 No.10 0.1019 2.588 No.11 0.0907 2.304 No.12 0.0808 2.052

WEIGHT

Modulus of Elasticity: Strand 23,000,000; Solid Wire 23,500,000. Coefficient of Linear Expansion: 0.000,007,2 per degree F. Modulus of Elasticity: Strand 16,200 kg/mm2; Solid Wire 16,500 kg/mm2. Coefficient of Linear Expansion: 0.000,013 per degree C. ™

www.AFLglobal.com or 800-866-7385 31

© 2003, AFL, all rights reserved. PP-3-00778, Revision 3, 3.6.14 Specifications are subject to change without notice.

Wire Products

Alumoweld® Type M Guy Strand Features Corrosion Resistance Alumoweld Type M guy strand is an economical, corrosion resistant guying material for use on overhead line structures. The thick cladding of aluminum on each wire protects the high-strength steel core from rusting and subsequent loss of strength. Costly maintenance is eliminated, and the original safety factor of the guy is maintained throughout the life of the line. Thick Aluminum Cladding The Alumoweld wire used to make Type M guy strand is unique in that the aluminum cladding thickness is guaranteed to be no less than 10% minimum of the wire radius. Thus, a thick corrosion barrier, that is pure aluminum not zinc or an iron-aluminum alloy, protects the steel core. Another important feature of any coated or clad wire is the bond between the coating material and the base metal. In the case of Alumoweld wire, the aluminum cladding and steel core are joined by a continuous ductile weld. This assures against cracking or separation of the protective aluminum from the steel core. Lightweight and Convenient Alumoweld Type M guy strand is easily handled and installed. It weighs less than any of the other high-strength guying materials. Applications Guying for: • Power lines • Telephone lines • Railway signals • Communication lines • Towers • Masts

continued

www.AFLglobal.com or 800-866-7385 32

© 2003, AFL, all rights reserved. PP-3-00778, Revision 3, 3.6.14 Specifications are subject to change without notice.

Wire Products

Alumoweld® Type M Guy Strand (cont.) Physical Characteristics

STRAND DESIGNATION

2.8M3 4M3 5M3 6M 7M3 8M 10M 12.5M 14M 16M 18M 19M3 20M 25M

NOMINAL DIAMETER OF STRAND IN

MM

0.174 0.220 0.247 0.242 0.277 0.272 0.306 0.343 0.363 0.386 0.417 0.433 0.444 0.519

4.42 5.59 6.27 6.15 7.04 6.91 7.77 8.71 9.22 9.80 10.59 11.00 11.28 13.18

NUMBER OF INDIVIDUAL WIRES 3 3 3 7 3 7 7 7 7 7 7 7 7 7

DIAMETER OF INDIVIDUAL WIRES

BREAKING LOAD

WEIGHT

APPROXIMATE RESISTANCE2

IN

MM

LBS

KG

LBS/1000 FT

KG/KM

OHMS/1000 FT

OHMS/ KM

0.081 0.102 0.114 0.081 0.128 0.091 0.102 0.114 0.121 0.128 0.139 0.144 0.148 0.173

2.06 2.59 2.90 2.06 3.25 2.31 2.59 2.90 3.07 3.25 3.53 3.67 3.76 4.39

2,800 4,000 5,700 6,000 7,200 8,000 10,000 12,500 14,000 16,000 18,000 19,000 20,000 25,000

1,270 1,814 2,585 2,721 3,265 3,628 4,535 5,670 6,350 7,257 8,164 8,618 9,072 11,340

44 70 89 104 112 131 165 208 232 262 306 330 347 475

65.47 104.16 132.43 154.75 166.66 194.93 245.52 309.50 345.22 389.86 455.33 491.10 516.34 706.80

2.62 1.65 1.31 1.13 1.04 0.89 0.71 0.56 0.50 0.45 0.38 0.35 0.34 0.25

8.60 5.44 4.30 3.71 3.41 2.92 2.33 1.84 1.64 1.48 1.25 1.16 1.12 0.82

1. Unless otherwise noted, the above guy strands are manufactured per Alumoweld Specification ER-3008. 2. For information only, not for calculation purposes. 3. Per ASTM B-416.

www.AFLglobal.com or 800-866-7385 33

© 2003, AFL, all rights reserved. PP-3-00778, Revision 3, 3.6.14 Specifications are subject to change without notice.

Wire Products

www.AFLglobal.com or 800-866-7385 34

© 2003, AFL, all rights reserved. PP-3-00778, Revision 3, 3.6.14 Specifications are subject to change without notice.

Mini-Dead Ends The Mini-Dead Ends are designed for fast and easy installation of your ADSS Mini-Span® cable. The Mini-Dead End is ideal in crowded distribution environments where its shorter length allows for efficient installation. This unique low-cost product is used in typical spans with 1%-2% installation sag. Features ADESDFW2-256 & 307

• Easy and quick installation • No special tools or hardware required for installation • Small, requiring less storage space Ordering Information

ADELD2E-323T & 383T

ADELD2E-424005TE

* shown with thimble eye

APPLICATION & DESCRIPTION Aerial Drop 256 150 ft NESC heavy, 275 ft NESC medium, 550 ft NESC light

AFL NO. ADESDFW2-256

Aerial Drop 307—Short Span (250 lb max. tension) 65 ft NESC heavy, 115 ft NESC medium, 210 ft NESC light

ADESDFW2-307

Aerial Drop 307—Long Span 220 ft NESC heavy, 400 ft NESC medium, 675 ft NESC light

ADELD2E-013TE

ADSS Mini-Span 323 175 ft NESC heavy, 300 ft NESC medium, 500 ft NESC light ADSS Mini-Span 383 180 ft NESC heavy, 300 ft NESC medium, 450 ft NESC light ADSS Mini-Span 424 275 ft NESC heavy, 450 ft NESC medium, 600 ft NESC light ADSS Mini-Span 484 275 ft NESC heavy, 400 ft NESC medium, 525 ft NESC light

ADELD2E-323T ADELD2E-383T ADELD2E-424005TE ADEMS484

NOTE: Part numbers ADEMS484, ADEW10J1-AL535, and ADEW16J1-AL693 attach to structure via common pole hardware sold separately such as thimble eye, ram’s head, guy hooks, etc. For spans greater than the span lengths above, contact Customer Service.

ADEMS484

© 2002, AFL, all rights reserved. PP-3-00028, Revision 5, 10.28.15 Specifications are subject to change without notice.

35

Wedge Dead End (to be used only on Standard ADSS Cable up to 0.890" diameter, 144 fibers) AFL offers wedge dead ends that ease and speed ADSS cable installation. The ADSS Wedge Dead End is ideal in crowded distribution environments because its shorter length allows for safer and efficient installation. The Wedge Dead End comes with all parts assembled. The side plates are properly aligned with spacers and self-locking hex bolts, as well as retainers. Lubricated wedges are pre-installed inside the body of the dead end.

ADEW10J1-AL535

Caution: The load ratings shown here are based on performance results of certain cable configurations and may not be representative of all manufacturers’ ADSS cable designs. AFL strongly recommends that before using this product, you contact AFL to obtain the recommended load rating and to verify that the wedge dead end has been qualified for use with the proposed cable. AFL will perform a qualification test at no charge.

Specifications

ADEW16J1-AL693

Benefits • Wedge-type design is safer than spiral wrap style dead ends • Fewer parts, smaller and easier to store • Attaches to structure via common pole hardware sold separately (thimble eye, ram’s head, etc.)

PARAMETER

VALUE

Wedge Length

10" or 16" depending on cable characteristics

Cable O.D.

0.512" to 0.890" (13 mm to 22.6 mm)

Hold Strength

100% of Maximum Rated Cable Load (MRCL)

Maximum Attenuation Change

0.05 dB at 100% MRCL

APPLICATION & DESCRIPTION ADSS Mini-Span® 535 500 ft NESC heavy, 700 ft NESC medium, 875 ft NESC light Maximum loading capability is 1500 lbs. ADSS Mini-Span 693 500 ft NESC heavy, 600 ft NESC medium, 750 ft NESC light Maximum loading capability is 1500 lbs.

AFL NO. ADEW10J1-AL535

ADEW16J1-AL693

Features • Easier and faster installation • Lower total system costs • No special tools or hardware required for installation Ordering Information for Double Jacket Cables ADE ADSS Dead End

W Wedge Type Dead End

16

J2

AL

YYY

Length of wedge component

ADSS Jacket Type

Cable Manufacturer Code

Cable Diameter (in Inches)

J2 = Double Layer

16 = 16 inch type Max. Load Rating = 3000 lbs.

AL = AFL

Application Notes: 1. For use with ADSS cables with polyethylene jackets only. Not for use on track resistant ADSS cable. 2. AFL fiber optic cable and related hardware are designed to work as a system. Dead ends may not be available for cable from other manufacturers.

© 2002, AFL, all rights reserved. PP-3-00067, Revision 4, 7.23.12 Specifications are subject to change without notice.

36

Mini-Bracket Mini Brackets are used for short and medium spans of ADSS fiber optic cable as well as Aerial Drop cables. Mini Brackets are sized to fit specific ADSS diameters. Standard Mini Brackets are employed with fitted bushings to provide a good support/groove fit and to prevent the support from damaging the cable. The bolted supports are supplied with aluminum captive bolts to simplify installation with no loose parts. Features Maximum one side angle: 8.5 degrees Mini-Bracket

Estimated weight: 2.9 lbs. (1.3 Kg) Maximum rated strength: 3,000 lbs. Hand tighten bolt to 25 in. lbs. (2.8 N-m) Slip load at 4 to 6% of RBS Ordering Information DESCRIPTION

AFL NO.

Aerial Drop 256 maximum line angle =17° (150 ft NESC heavy, 275 ft NESC medium, 550 ft NESC light)

AMBB256

Aerial Drop 307 maximum line angle =17° (220 ft NESC heavy, 400 ft NESC medium, 675 ft NESC light)

AMBB307

ADSS Mini-Span 424 maximum line angle =17° (275 ft NESC heavy, 450 ft NESC medium, 600 ft NESC light)

AMBB424

ADSS Mini-Span 484 maximum line angle =17° (275 ft NESC heavy, 400 ft NESC medium, 525 ft NESC light)

AMBB484-535

ADSS Mini-Span 535 maximum line angle =17° (350 ft NESC heavy, 550 ft NESC medium, 675 ft NESC light)

AMBB484-535

Mini Formed Wire Tangent Support (FTS) Formed Wire Tangent Supports (FTS) are used with ADSS Mini-Span® 323 and Mini-Span® 383 for short span applications. Tangent supports provide a method of attaching AFL’s smallest ADSS Mini-Span designs with excellent unbalanced load capability and bend relief support. This product is designed to connect directly to J-hooks on wood poles for an economical solution. ATS 321/330 ATS 371/383

Ordering Information DESCRIPTION

AFL NO.

ADSS Mini-Span 323 maximum line angle = 20°(175 ft NESC heavy, 300 ft NESC medium, 500 ft NESC light)

ATS321/330

ADSS Mini-Span 383 maximum line angle = 20°(180 ft NESC heavy, 300 ft NESC medium, 450 ft NESC light)

ATS371/383

© 2002, AFL, all rights reserved. PP-3-00027, Revision 2, 8.31.11 Specifications are subject to change without notice.

37

Downlead Clamp for ADSS

(with or without Unequal Diameters) AFL Downlead Clamps are used to guide ADSS wire from the top of the structure to the splice box. Our clamps install easily and provide proper spacing and hold strength without damage to the cable. From poles to towers, we offer a full line of ADSS Downlead Clamps to meet the needs of any application. Downlead Clamp shown with Adapter B

Features • • • •

Slip strength: >100 lbs. Lattice adapters provided with break-away bolts for precise torque during installation Steel tower guide clamps available with adapters to eliminate the need for drilling Banding adapters available

Ordering Information – Downlead Clamp & Adapter BUSHING DESIGNATION

DIAMETER (INCHES)

COLOR CODE

B4

0.350 - 0.500

red

B5

0.501 - 0.600

green

B6

0.601 - 0.700

yellow

B7

0.701 - 0.800

blue

B8

0.801 - 0.900

white

B9

0.901 - 1.000

black

B10

1.001 - 1.100

orange

FD

OA

XX

Fiber Downlead

OPGW and ADSS

Bushing Designation (Smaller Dia.)

YY

Z

Bushing Indicates Adapters Designation A = Banding Adapter (Larger Dia.) B = Lattice Adapter

M M for Metric Hardware

for web thickness .25" - .72" C = Lattice Adapter for web thickness .72" - 1.25" D = 3/8" diameter x 3" lag bolt E = Lattice Adapter for web thickness .25" - 1.25" Omit = No adapter desired

Ordering Example: For .528" dia. OPGW and .484 ADSS with pole banding (Type A), the part number is FDOA-B4B5A. NOTES: 1. If metric hardware is desired, add a "M" suffix to the end. 2. See next page for optional downlead clamp adapters.

© 2008, AFL, all rights reserved. PP-3-00003, Revision 3, 7.13.15 Specifications are subject to change without notice.

38

Downlead Clamp and Optional Downlead Clamp Adapters Dimensions FIG. 1

FIG. 2

BAND TO BE SUPPLIED BY CUSTOMER (1.25" MAX)

.50" 1.78"

2.44"

.50"

4.34"

3.69"

2.38"

2.38"

4.34"

FDOA XXYY NO ADAPTER

Downlead Clamp Adapters FIG. 1

FIG. 1

3.25"

.75" REF.

.50" DIA. BREAK-AWAY BOLT

TYPE A ADAPTER WITH FIGURE 2 BANDING CONFIGURATION EST. WEIGHT: .96 LBS.

1.50" .75" TOWER STEEL RANGE .72" - 1.25"

FDOA XXYYB

FDOA XXYYC

TYPE B ADAPTER WITH FIGURE 1 LATTICE CONFIGURATION EST. WEIGHT: 1.98 LBS.

TYPE C ADAPTER WITH FIGURE 1 LATTICE CONFIGURATION EST. WEIGHT: 2.20 LBS.

3/8" DIA. X 3" LAG BOLT

FDOA XXYYD TYPE D ADAPTER WITH FIGURE 1 LATTICE CONFIGURATION EST. WEIGHT: .96 LBS.

FIG. 1

1.38"

FDOA XXYYA

1.06" .75" TOWER STEEL RANGE .25" - .72"

BREAK-AWAY BOLT

3.25"

2.44"

FIG. 1

1.38"

3.25"

BAND TO BE SUPPLIED BY CUSTOMER (1.25" MAX) FIG. 2

.75" C 1.50" L TOWER STEEL RANGE .25"-1.25" FDOA XXYYE

BREAK-AWAY BOLT

TYPE E ADAPTER WITH FIGURE 1 LATTICE CONFIGURATION EST. WEIGHT: 2.20 LBS. © 2008, AFL, all rights reserved. PP-3-00003, Revision 3, 7.13.15 Specifications are subject to change without notice.

39

Temporary Grip Temporary Grips are used in stringing the ADSS during sagging and where it is necessary to make short term catch on the ADSS. The Temporary grip for ADSS is a high strength aluminum body designed to hold 2,500 pounds or 50% of MRCL of the cable. Application Notes: 1. Mechanical Grip for Use with Polyethylene Outer Jackets Only

VISE SCREW VISE BODY VISE PLATE

1.58" (40.1 MM) APPROX. 19.0" (483 MM)

17.00" (432 MM)

3.00" (76.2 MM)

Maximum load is 2,500 lbs. Thimble Clevis is included to attach temporary grip bail to chain hoist.

Ordering Information A

TG

ADSS

Temporary Grip

MEM

XXX

A

ADSS Cable Diameter (in Decimal Inches)

Ordering Information for Additional Wedges A ADSS

CAUTION:

TG Temporary Grip

W

XXX

Wedge Set

Cable O.D. in Inches x 1000 (Max Cable Dia. = .890")

The Temporary Grip is only to be used for AFL ADSS cables with standard polyethylene jackets with a maximum O.D. of .890 or less.

© 2008, AFL, all rights reserved. PP-3-00061, Revision 2, 8.31.11 Specifications are subject to change without notice.

40

Limited Tension Formed Wire Dead End for ADSS Cable 3 4

5 LENGTH "L"

ALL DIELECTRIC SELF SUPPORTING CABLE

2 Item 1 2 3 4 5

1

Features • Components strength—15,000 lbs. • Maximum initial tension—up to 1,000 lbs. • Maximum loaded tension—up to 2,500 lbs. • Dead end component cannot be reused • Contact AFL for track-resistant ADSS application

Description Reinforcing Rods (SRR) Formed Wire Dead-End Thimble Clevis Extension Link 5/8 Eye Nut

Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel

Ordering Information AFL NO. ADESE400/424C

CABLE OD (IN) .400-.424

CABLE OD (MM) 10.1-10.7

LENGTH "L" IN (M) 48 (1.2)

COLOR CODE Black

ADESE425/451C ADESE452/481C ADESE482/510C ADESE511/542C ADESE543/577C ADESE578/613C ADESE614/651C ADESE652/692C ADESE693/737C ADESE738/784C ADESE785/834C ADESE835/889C ADESE890/945C ADESE946/1007C ADESE1008/1073C ADESE1074/1140C ADESE1141/1212C ADESE1213/1288C

.425-.451 .452-.481 .482-.510 .511-.542 .543-.577 .578-.613 .614-.651 .652-.692 .693-.737 .738-.784 .785-.834 .835-.889 .890-.945 .946-1.007 1.008-1.073 1.074-1.140 1.141-1.212 1.213-1.288

10.7-11.4 11.4-12.2 12.2-12.9 12.9-13.7 13.7-14.6 14.6-15.5 15.5-16.5 16.6-17.5 17.5-18.7 18.7-19.9 19.9-21.1 21.2-21.5 22.6-24.0 24.0-25.5 25.6-27.2 27.2-28.9 28.9-30.7 30.8-32.5

48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 48 (1.2) 60 (1.5) 60 (1.5) 60 (1.5) 60 (1.5)

Yellow Green Orange Blue White Red Black Yellow Green Orange Blue White Red Black Yellow Green Orange Blue

© 2002, AFL, all rights reserved. PP-3-00013, Revision 3, 7.23.12 Specifications are subject to change without notice.

41

Medium Tension Dead End for ADSS Cable 3 4

5 LENGTH "L"

ALL DIELECTRIC SELF SUPPORTING CABLE

2 Item 1 2 3 4 5

1

Features • Component strength—15,000 lbs. • Maximum initial tension—up to 2,000 lbs. • Maximum loaded tension—up to 4,000 lbs. • Dead end component cannot be reused • Contact AFL for track-resistant ADSS application

Description Reinforcing Rods (SRR) Formed Wire Dead-End Thimble Clevis Extension Link 5/8 Eye Nut

Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel

Ordering Information AFL NO. ADEME482/510C

CABLE OD (IN) .482-.510

CABLE OD (MM) 12.2–12.9

LENGTH "L" IN (M) 85(2.2)

COLOR CODE Orange

ADEME511/542C ADEME543/577C ADEME578/613C ADEME614/651C ADEME652/692C ADEME693/737C ADEME738/784C ADEME785/834C ADEME835/889C ADEME890/945C ADEME946/1007C ADEME1008/1073C ADEME1074/1140C ADEME1141/1212C ADEME1213/1288C

.511-.542 .543-.577 .578-.613 .614-.651 .652-.692 .693-.737 .738-.784 .785-.834 .835-.889 .890-.945 .946-1.007 1.008-1.073 1.074-1.140 1.141-1.212 1.213-1.288

12.9–13.7 13.7–14.6 14.6–15.5 15.5–16.5 16.5–17.5 17.6–18.7 18.7–19.9 19.9–21.1 21.2–22.5 22.6.–24.0 24.0–25.5 25.6–27.2 27.2–28.9 28.9–30.7 30.8–32.5

85(2.2) 85(2.2) 85(2.2) 85(2.2) 85(2.2) 85(2.2) 85(2.2) 90(2.3) 90(2.3) 95(2.4) 95(2.4) 97(2.5) 100(2.5) 103(2.6) 105(2.7)

Blue White Red Black Yellow Green Orange Blue White Red Black Purple Pink Brown Orange

© 2002, AFL, all rights reserved. PP-3-00029, Revision 3, 7.23.12 Specifications are subject to change without notice.

42

Semi-High Tension Dead End for ADSS Cable 3 4

5 ALL DIELECTRIC SELF SUPPORTING CABLE

2 Item 1 2 3 4 5

1

Description Reinforcing Rods (SRR) Formed Wire Dead-End Thimble Clevis Extension Link 5/8 Eye Nut

Material Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel

Ordering Information

Features • Components strength—15,000 lbs. • Maximum initial tension—up to 4,000 lbs. • Maximum loaded tension—up to 7,500 lbs. • Dead end component cannot be reused • Contact AFL for Length Information and track-resistant ADSS application • Lengths range from 100" to 134"

AFL NO. ADELE511/542C

CABLE OD (IN) .511-.542

CABLE OD (MM) 12.9-13.7

COLOR CODE Blue

ADELE543/577C ADELE578/613C ADELE614/651C ADELE652/692C ADELE693/737C ADELE738/784C ADELE785/834C ADELE835/889C ADELE890/945C ADELE946/1007C ADELE1008/1073C ADELE1074/1140C ADELE1141/1212C ADELE1213/1288C

.543-.577 .578-.613 .614-.651 .652-.692 .693-.737 .738-.784 .785-.834 .835-.889 .890-.945 .946-1.007 1.008-1.073 1.074-1.140 1.141-1.212 1.213-1.288

13.7-14.6 14.6-15.5 15.5-16.5 16.5-17.5 17.6-18.7 18.7-19.9 19.9-21.1 21.2-22.5 22.6-24.0 24.0-25.5 25.6-27.2 27.2-28.9 28.9-30.7 30.8-32.5

White Red Black Yellow Green Orange Blue White Red Black Purple Pink Brown Orange

© 2002, AFL, all rights reserved. PP-3-00605, Revision 3, 7.23.12 Specifications are subject to change without notice.

43

Formed Wire Suspension for ADSS Cable L1

1a

L2

1b 3

1c

Features

Item 1a,c 1b 2 3

• For line or elevation angle changes less than 30º • Max vertical load—20,000 lbs.

Description Suspension Housing Insert (2 Halves) Reinforcing Rods (SRR) Outer Support Rods

2

Material Aluminum Alloy Elastomer Aluminum Alloy Aluminum Alloy

Ordering Information STRUCTURAL REINFORCEMENT RODS LENGTH "L1" ROD DIA. RODS PER CABLE O.D. RANGE (INCHES) (INCHES) SET 0.399" - 0.418" 80 .146 10

COLOR CODE Yellow

OUTER RODS LENGTH"L2" ROD DIA. (INCHES) (INCHES) 42 .204

RODS PER SET 11

COLOR CODE Yellow

AFL NO. ASU399/418

0.419" - 0.439" 0.440" - 0.458" 0.459" - 0.461" 0.462" - 0.476" 0.477" - 0.503" 0.504" - 0.511" 0.512" - 0.536" 0.537" - 0.559" 0.560" - 0.565" 0.566" - 0.573" 0.574" - 0.598" 0.599" - 0.625" 0.626" - 0.632" 0.633" - 0.666" 0.667" - 0.682" 0.683" - 0.710" 0.711" - 0.728" 0.729" - 0.744" 0.745" - 0.750" 0.751" - 0.786" 0.787" - 0.814" 0.815" - 0.845" 0.846" - 0.855" 0.856" - 0.894" 0.895" - 0.907" 0.908" - 0.916" 0.917" - 0.929" 0.930" - 0.942" 0.943" - 0.977"

Black White Purple Purple Orange Red Blue Green Green Black Black Brown Red Red Yellow Yellow White White White White Green Yellow Green Black White Purple Brown Red Orange

42 43 46 46 46 46 49 49 49 54 54 54 63 63 63 63 63 63 63 63 72 72 72 80 80 80 80 80 80

11 11 10 10 10 10 11 11 11 12 12 12 11 11 11 11 12 12 12 12 11 11 12 12 12 12 12 12 13

Black White Orange Purple Orange Purple Blue Green Green Black White Brown Red Blue Green Yellow Black White White Brown Green Yellow Blue Black White Purple Brown Red Orange

ASU419/439 ASU440/458 ASU459/461 ASU462/476 ASU477/503 ASU504/511 ASU512/536 ASU537/559 ASU560/565 ASU566/573 ASU574/598 ASU599/625 ASU626/632 ASU633/666 ASU667/682 ASU683/710 ASU711/728 ASU729/744 ASU745/750 ASU751/786 ASU787/814 ASU815/845 ASU846/855 ASU856/894 ASU895/907 ASU908/916 ASU917/929 ASU930/942 ASU943/977

80 81 84 84 84 84 87 87 87 92 92 92 102 102 102 102 102 102 102 102 111 111 111 119 119 119 119 119 119

.146 .146 .167 .167 .146 .146 .167 .167 .167 .182 .182 .182 .204 .204 .204 .204 .204 .204 .204 .204 .250 .250 .250 .250 .250 .250 .250 .250 .250

10 11 10 10 12 12 11 11 11 11 11 12 11 11 12 12 12 12 12 13 11 12 12 12 12 13 13 13 13

.204 .204 .250 .250 .250 .250 .250 .250 .250 .250 .250 .310 .310 .310 .310 .310 .310 .310 .310 .310 .365 .365 .365 .365 .365 .365 .365 .365 .365

© 2002, AFL, all rights reserved. PP-3-00022, Revision 2, 10.22.13 Specifications are subject to change without notice.

44

Trunnion Assemblies AFL offers trunnions with various mounting capabilities: bolted, banded or standoff. Trunnions reduce installation costs by functioning as a pull-through during installation (maximum line angle for stringing is 15° total, 7.5° per side, number of structures not to exceed 30). No block or pulley is needed provided these conditions are met. Features • May be used as a pull-through by removing the bushing inserts • High-strength aluminum • Smaller and more compact design • Facilitates faster installation • Color-coded range taking inserts for easy identification • Versatile mounting styles to fit different structure types: bolted, banded or standoff • Banding and pole hardware supplied by customer • Lowers the total cost of installation • Span Length: 600 ft. - NESC Heavy 1,200 ft. - NESC Light Ordering Information CABLE O.D. RANGE

EST. WEIGHT

INCHES

MILLIMETERS

LBS.

KG

BUSHING COLOR

AFL NO.

0.420" - 0.474"

10.67 - 12.05

2.05

.930

Black

ATGN420/474

0.475" - 0.525"

12.07 - 13.34

2.05

.930

Blue

ATGN475/525

0.526" - 0.575"

13.36 - 14.61

2.05

.930

Orange

ATGN526/575

0.576" - 0.625"

14.63 - 15.88

2.04

.925

Brown

ATGN576/625

0.626" - 0.675"

15.90 - 17.15

2.04

.925

Green

ATGN626/675

0.676" - 0.725"

17.17 - 18.42

2.03

.921

White

ATGN676/725

0.726" - 0.775"

18.44 - 19.69

2.03

.921

Red

ATGN726/775

0.776" - 0.825"

19.71 - 20.96

2.02

.916

Purple

ATGN776/825

0.826" - 0.875"

20.98 - 22.23

2.02

.916

Yellow

ATGN826/875

0.876" - 0.925"

22.25 - 23.50

2.02

.916

Pink

ATGN876/925

Application Notes: 1. For use with ADSS cables with polyethylene jackets only. Not for use on track resistant ADSS cable. 2. As a stringing block: Maximum line angle = 15º (7.5º per side) Maximum number of structures = 30 3. For final installation: Maximum line angle = 22º (11º per side)

© 2002, AFL, all rights reserved. PP-3-00062, Revision 3, 11.28.11 Specifications are subject to change without notice.

45

Spiral Vibration Damper for ADSS or OPGW Cable Spiral Vibration Dampers have a helically formed damping section sized for interplay of damper and cable to provide the action/reaction motion that opposed the natural vibration wave. A smaller gripping section gently grips the cable so that cable and fiber are not damaged or distorted and there is no optical signal loss. These PVC Spiral dampers are recommended for the ADSS cable when the combination of span length and tension indicate by vibration review that external vibration protection is required.

CABLE NOTE SMALLER HELIX

GRIPPING SECTION 8"

DAMPING SECTION

Optical Ground Wire Spiral Vibration Damper DIAMETER RANGE AFL NO.

INCHES

MM

TOTAL LENGTH INCH (M)

OSVD327/461

.327-.461

8.3-11.6

51 (1.3)

OSVD462/563

.462-.563

11.7-14.3

53 (1.3)

OSVD564/760

.564-.760

14.4-19.3

61 (1.5)

ADSS Spiral Vibration Damper DIAMETER RANGE AFL NO.

INCHES

MM

TOTAL LENGTH INCH (M)

AVD250/326

.250-.326

6.3-8.2

49 (1.24)

AVD327/461

.327-.461

8.3-11.6

51 (1.30)

AVD462/563

.462-.563

11.7-14.3

53 (1.35)

AVD564/770

.564-.770

14.4-19.5

65 (1.65)

AVD771/876

.771-.876

19.5-22.2

71 (1.80)

AVD877/1000

.877-1.00

22.3-25.3

72 (1.91)

AVD1001/1250

1.001-1.25

25.4-30.5

75 (2.29)

NOTE: OPGW and ADSS Spiral Vibration Dampers are not interchangeable.

© 2002, AFL, all rights reserved. PP-3-00058, Revision 3, 7.23.12 Specifications are subject to change without notice.

46

Fiber Storage Units for ADSS Fiber Optic Cable AFL Fiber Storage Units (FSU) are used to conveniently store an extra length of cable along the ADSS cable run for later use. Furnished as pairs (kit contains two Fiber Storage Units and two sets of hanger brackets), these FSUs are constructed from UV stabilized PPE thermoplastic. All basic hardware for attachment to the ADSS cable is provided. ADSS cable mount support brackets meet Telcordia® specifications. Epoxy coated clamping devices meet ASTM specifications A153 and B695. Features • Small profile and side facing channel minimizes ice and leaf loading • Constructed from UV stabilized PPE thermoplastic • Basic hanging hardware (bolts, nuts, washers) and strand clamps all included • Tie-wrap slots for securing cable • Epoxy-coated strand clamps

The "TP" mounting bracket features an angled, tent-profile, epoxy-coated bracket for standard ADSS cable mounting. Specifications PARAMETER Nominal Channel Width - in. (cm) Minimum Bend Diameter - in. (cm)

FOSP-12-ADSS-TP

FOSP-17-ADSS-TP

0.625

1.00

12

17.5

Ordering Information DESCRIPTION FOSP ADSS Kit

FOSP-12-ADSS-TP FA000049

FOSP-17-ADSS-TP FA000050

Kits contain one pair of FOSP and two sets of hanger brackets.

Typical Installation Diagram

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2009, AFL, all rights reserved. PP-2-00123, Revision 2, 8.5.11 Specifications are subject to change without notice.

47

Drop Cable Storage Unit (DCSU) for Fiber Optic Cable Drops The AFL DCSU Fiber Storage Unit is designed to store and organize the slack from a fiber drop that is left at a fiber distribution terminal. The DCSU can also to be used for the organization or storage of any unused multi-fiber drop in the placing of a multi-port terminal from VATS splices. In this way, cable left for future use is safely stored. The DCSU can manage up to 12 fiber drops when laid flat into the raceway, with minimal slack required at the terminal. The AFL DCSU includes all hardware required for aerial strand mounting. Strand mount support brackets meet Telcordia® specifications. Galvanized strand clamping devices accommodate 1/4" to 7/16" strand and meet ASTM specifications A153 and B695. DCSUs are constructed from aluminum with a baked acrylic enamel finish. Features • Weather-resistant, lightweight powder-coated aluminum • Keyed bracket mount prevents twisting • Mounting hardware for aerial, pole or wall mounting • One tool, one bracket mounting • Meets minimum bend radius requirements • Flared ends prevent chaffing • Allows length of reserve fiber to be adjusted • Stackable if necessary using optional longer bolt • Spring-type lockable fingers hold fiber drops and cable • No tie-wraps required Specifications PARAMETER Nominal Channel Width in. (cm) Minimum Bend Diameter in. (cm)

DCSU-8 1.25 (3.18) 8 (20.32)

Ordering Information DESCRIPTION FOSP-DROP Kit (Pair) DCSU Wall/Pole Mount Bracket

AFL NO. FA000047 FA000067

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00121, Revision 2, 6.11.12 Specifications are subject to change without notice.

48

Fiber Optic Cable

Indoor/Outdoor Breakout Cable AFL’s Indoor/Outdoor Breakout Cables are perfectly suited for rugged applications and installations requiring increased performance. Available in 2 to 12 fiber counts, these cables feature a UV- and fungal-resistant semi-pressure extruded outer jacket. The individual sub-units measure 2.5 mm, allowing for ease of field termination, and use water-blocking aramid which further protects the tight-buffered fiber.

Cable Components

Features

Applications

• Fungus, water and UV-resistant PVC jacket featuring SP extrusion technology • Riser-rated with water-blocked sub-units • Sub-units and tight buffer available in a variety of colors • Tested to meet or exceed GR-409-CORE and ICEA-S-104-696 • Compliant to Directive 2002/95/EC (RoHS) • MSHA approved for mining applications

• Harsh Environment • Mining • Industrial • Campus Environment

2-Fiber

12-Fiber PVC outer jacket

PVC outer jacket

2.4 mm water-blocked simplex sub-unit

2.5 mm simplex sub-unit

- 900 µm buffered fiber

- 900 µm buffered fiber

- water swellable aramid yarn strength members

- water swellable aramid yarn strength members

- PVC jacket

- PVC jacket

strength member (2)

upjacketed FRP center strength member

ripcord

ripcord

Mechanical Data NOMINAL TENSION BENDING RADIUS DIAMETER WEIGHT LBS (N) INCHES (CM) FIBER AFL NO. COUNT INCHES (MM) LBS/1000FT (KG/KM) INSTALLATION LONG TERM INSTALLATION LONG TERM 2 0.30 (7.5) 32 (49) 300 (1335) 150 (667) 3.8 (9.6) 2.5 (6.4) BX002251801 4 0.32 (8.2) 37 (55) 450 (2000) 185 (825) 3.9 (9.9) 3.2 (8.1) BX004251801 6 0.38 (9.6) 54 (80) 750 (3360) 375 (1680) 4.8 (12.2) 3.8 (9.7) BX006251801 PVC outer jacket PVC outer jacket 8 0.44 (11.1) 75 (111) 1000 (4450) 425 (1750) 6.6 (16.8) 4.4 (11.2) BX008251801 2.4 mm water-blocked simplex sub-unit 2.5 mm simplex sub-unit 12 0.57 (14.5) 165 (245) 1425 (6360) 570 (2535) 8.5 (21.6) 5.7 (14.5) BX012251801 - 900 µm buffered fiber - 900 µm buffered fiber - water swellable aramid yarn strength members - water swellable aramid yarn strength members 2.9 mm sub-units are also available. - PVC jacket - PVC jacket

Temperature Specifications

strength member (2)

upjacketed FRP center strength member

 Please specify fiber type when ordering (see below) ripcord

ripcord

5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 9 = 9/125 µm single-mode L = 50/125 µm multimode Laser-Link™ 300 for 10 Gigabit Ethernet K = Single-mode Futureguide SR-15e Bend Insensitive

PARAMETER Storage

VALUE -40°C to +70°C

Operating

-40°C to +70°C

Installation

-20°C to +70°C

Contact Customer Service for special fiber types/performance needs.

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00051, Revision 3, 5.28.15 Specifications are subject to change without notice.

49

Fiber Optic Cable

Indoor/Outdoor Breakout Cable Specifications

CORE SIZE/ FIBER TYPE (6) 62.5 Giga-Link™ 300 (8) 62.5 Giga-Link™ 1000 (5) 50 Giga-Link™ 600 (7) 50 Giga-Link™ 2000 (A) 50 Laser-Link™ 150 (L) 50 Laser-Link™ 300 (C) 50 Laser-Link™ 550 (K) SM Futureguide SR-15e Bend Insensitive (ITU G.657.A) (9) SM (1) 100/140 Multimode

ISO/ IEC OM1 OM1 OM2 OM2 OM2 OM3 OM4 OS2

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1550 NM 3.5 1.2 N/A 3.5 1.2 N/A 3.5 1.5 N/A 3.5 1.2 N/A 3.0 1.2 N/A 3.0 1.2 N/A 3.0 1.2 N/A N/A 0.5 0.5

OS2

N/A 5.5

0.5 3.5

0.5 N/A

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 700 500 1500 500 3500 550 N/A N/A N/A 100

N/A 100

EMBc (MHZ•KM) N/A N/A N/A N/A 950 2000 4700 N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 800 550 1000 550 1040 550 N/A 5000 N/A N/A

5,000 N/A

10 GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 32 ­— 65 — 82 — 110 — 150 — 300 — 550 — N/A 10,000 N/A N/A

10,000 N/A

Tested to meet or exceed EIA/TIA 568-B3 / Telcordia GR-409-CORE

Cable Length - Reel Size ITEM Reel Height (inches) Reel Outside Width (inches) Drum Diameter (inches) Reel Weight (lbs) CAPACITY: METERS (FEET) 4 Fiber Breakout 6 Fiber Breakout 8 Fiber Breakout 12 Fiber Breakout

REEL F 42 36 23 148 2,500 / (8,200) 2,500 / (8,200) 2,500 / (8,200) 1,600 / (5,250)

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00051, Revision 3, 5.28.15 Specifications are subject to change without notice.

50

Fiber Optic Cable

Indoor/Outdoor Low Smoke Zero Halogen Breakout Cable AFL’s Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Breakout Cables are perfectly suited for rugged applications and installations requiring increased performance. LSZH- rated I/O Breakout cables are available from 2-24 count with variable sub-cable dimensions to support specific termination and routing requirements.  These cables feature a durable IEC-compliant, zero halogen, UV and fungal resistant outer jacket. Sub-cables can be specified at 2.0 mm, 2.4 mm or 2.9 mm diameters to fit the specific application.  Additional strength member is applied to specifically support wedge-style industrial termination schemes. Tested and qualified to the most stringent safety and performance standards, Low Smoke Zero Halogen Breakout cables can be deployed with confidence in the most demanding of conditions. Applications

Features

• Harsh Environment • Industrial • Campus Environment

• UL 1666 riser-rated with water-blocked sub-units • Sub-units and tight buffer available in a variety of colors • Tested to meet or exceed GR-409-CORE and ICEA-S-104-696 • Compliant to Directive 2002/95/EC (RoHS)

Typical Performance Weathering Low/High Temp Bend External Freeze Cyclic Flex Impact Cold Impact Crush Resistance Cable Twist

720 hrs -20°C to 70°C

FOTP-89 FOTP-37

FOTP-98 2000 cycles FOTP-104 1500 impacts FOTP-25 -20°C FOTP-25 2200 N/cm FOTP-41 FOTP-85

Cable Components A B

C D

2 and 4 Fiber

A B

A B

C D

C D

A B

C D

8 Fiber

6 Fiber

12 Fiber

A = FRPE outer jacket B = FRPE sub-cable - 900 µm buffered fiber - water swellable aramid yarn strength members C = strength member D = aramid yarn

www.AFLglobal.com or (800) 235-3423

© 2013, AFL, all rights reserved. PP-1-00040, Revision 0, 1.3.13 Specifications are subject to change without notice.

51

Fiber Optic Cable

Indoor/Outdoor Low Smoke Zero Halogen Breakout Cable (cont.) Mechanical Data AFL NO.

WEIGHT

BE00220100E BE00420100E BE00620100E BE01220100E BE02420100E

UNITS NOMINAL DIAMETER INCHES (MM) 2 .30(7.7) 4 .30(7.7) 6 .35(8.8) 12 .50(12.7) 24 .57(14.9)

TENSION LBS (N) LBS/1000 FT (KG/KM) INSTALLATION 42(62) 300(1334) 42(62) 300(1334) 54(81) 300(1334) 115(171) 600(2667) 140(208) 600(2667)

LONG TERM 90(400) 90(400) 90(400) 180(800) 180(800)

BENDING RADIUS INCHES (CM) INSTALLATION 4.5(11.4) 4.5(11.4) 5.2(13.2) 7.5(19.0) 8.8(22.4)

LONG TERM 3.0(7.6) 3.0(7.6) 3.5(8.8) 5.0(12.7) 5.9(14.9)

BE00224100E

2

.34(8.6)

50(75)

BE00424100E

4

.34(8.6)

50(75)

300(1334)

90(400)

5.0(12.7)

3.4(8.6)

300(1334)

90(400)

5.0(12.7)

BE00624100E

6

.40(10.2)

3.4(8.6)

70(104)

300(1334)

90(400)

6.0(15.3)

BE01224100E BE02424100E

12 24

4.0(10.2)

.58(14.8) .66(16.8)

154(230) 183(273)

600(2667) 600(2667)

180(800) 180(800)

8.7(22.2) 9.9(25.2)

5.8(14.8) 6.6(16.8)

BE00230100E BE00430100E

2

.39(9.8)

62(93)

300(1334)

90(400)

5.8(14.7)

3.9(9.8)

4

.39(9.8)

62(93)

300(1334)

90(400)

5.8(14.7)

3.9(9.8)

BE00630100E

6

.45(11.6)

87(130)

300(1334)

90(400)

6.8(17.3)

4.6(11.6)

BE01230100E

12

.71(18.0)

217(323)

600(2667)

180(800)

10.6(27.0)

7.1(18.0)

.79(20.0) 245(365) 600(2667) BE02430100E 24

180(800)

11.8(30.0)

7.8(20.0)

 Please specify fiber type when ordering (see below) 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000

9 = 9/125 µm single-mode L = 50/125 µm multimode Laser-Link 300 for 10 Gigabit Ethernet K = Single-mode Futureguide SR-15e Bend Insensitive Contact Customer Service for special fiber types/performance needs.

Temperature Specifications PARAMETER Storage

VALUE -40°C to +70°C

Operating

-40°C to +70°C

Installation

-20°C to +70°C

Cable Length—Reel Size ITEM Reel Height (inches) Reel Outside Width (inches) Drum Diameter (inches) Reel Weight (lbs) CAPACITY: Feet (meters) 4 Position 6 Position 8 Position 12 Position

REEL F 42 36 23 148 5,000 (1,500) 5,000 (1,500) 5,000 (1,500) 5,000 (1,500)

www.AFLglobal.com or (800) 235-3423

© 2013, AFL, all rights reserved. PP-1-00040, Revision 0, 1.3.13 Specifications are subject to change without notice.

52

Fiber Optic Cable

Ruggedized Indoor/Outdoor Breakout Cable AFL Ruggedized Indoor/Outdoor Riser Breakout cable is suited for applications requiring a high performance fiber optic cable. Water-blocked and re-inforced with all-dielectric strength members within the core, this cable can withstand the rigors presented by higher end installations. Available in 2-12 fiber counts, these cables feature a UV-and Fungal-Resistant semi-pressure extrueded outer jacket. Individual sub-units measure 2.5 mm, allowing for ease of field termination. Sub-units are also water-blocked adding to the overall protection of the fiber optic components from environmental damage.

Cable Components 2 and 4 Fiber

Features

Applications

• Fungus, water and UV-resistant PVC jacket featuring SP extrusion technology • Riser-rated with water-blocked sub-units • Sub-units and tight buffer available in a variety of colors • Tested to meet or exceed GR-409-CORE and ICEA-S-104-696 • Compliant to Directive 2002/95/EC (RoHS) • MSHA approved for mining applications

• Harsh Environment • Mining • Industrial • Campus Environment

PVC outer jacket

12 Fiber

PVC outer jacket

2.5mm water-blocked simplex sub-unit

2.5mm simplex sub-unit

- 900µm buffered fiber

- 900µm buffered fiber

- water swellable aramid yarn strength members

- water swellable aramid yarn strength members

- PVC jacket

- PVC jacket

aramid yarn

strength member

strength member

aramid yarn

Mechanical Data AFL NO.

FIBER COUNT

NOMINAL WEIGHT TENSION DIAMETER LBS (N) INCHES (MM) LBS/1000FT (KG/KM) INSTALLATION 49 (73) 300 (1334) .34 (8.6) BM002251001 2 .34 (8.6) 49 (73) 300 (1334) BM004251001 4 .40 (10.1) 69 (102) 300 (1334) BM006251001 6 .46 (11.8) 93 (138) 300 (1334) BM008251001 8 .51 (13.0) 95 (142) 300 (1334) BM012251001 12 2.9 mm sub-units are also available.  Please specify fiber type when ordering (see below) 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 9 = 9/125 µm single-mode L = 50/125 µm multimode Laser-Link 300 for 10 Gigabit Ethernet K = Single-mode Futureguide SR-15e Bend Insensitive

LONG TERM 90 (400) 90 (400) 90 (400) 90 (400) 90 (400)

BENDING RADIUS INCHES (CM) INSTALLATION 5.0 (12.6) 5.0 (12.6) 6.02 (15.3) 7.0 (18.0) 8.0 (20.0)

LONG TERM 3.3 (8.4) 3.3 (8.4) 4.1 (10.2) 4.6 (11.8) 5.3 (13.5)

Temperature Specifications PARAMETER Storage

VALUE -40°C to +70°C

Operating

-40°C to +70°C

Installation

-20°C to +70°C

Contact Customer Service for special fiber types/performance needs.

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00081, Revision 1, 2.6.12 Specifications are subject to change without notice.

53

Fiber Optic Cable

Ruggedized Indoor/Outdoor Breakout Cable Specifications MAXIMUM ATTENUATION (DB/ KM)

CORE SIZE/ FIBER TYPE

850 NM 3.5 (6) 62.5 Giga-Link 300 (8) 62.5 Giga-Link™ 1000 3.5 (5) 50 Giga-Link™ 600 3.5 (7) 50 Giga-Link™ 2000 3.5 (A) 50 Laser-Link 150 3.0 (L) 50 Laser-Link 300 3.0 (C) 50 Laser-Link 550 3.0 (K) SM Futureguide SR-15e N/A Bend Insensitive (ITU G.657.A) (9) SM N/A (1) 100/140 Multimode 5.5 ™

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM)

EMBc (MHZ•KM)

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS)

10 GIGABIT ETHERNET MIN. LINK DISTANCE (METERS)

850 NM

1300 NM

850 NM

1300 NM

1300 NM 1.2 1.2 1.5 1.2 1.2 1.2 1.2 0.5

1550 NM N/A N/A N/A N/A N/A N/A N/A 0.5

850 NM

1300 NM

200 350 500 500 700 1500 3500 N/A

600 600 500 800 500 500 550 N/A

N/A N/A N/A N/A 950 2000 4700 N/A

300 500 600 750 800 1000 1040 N/A

550 1000 600 2000 550 550 550 5000

32 65 82 110 150 300 550 N/A

­— — — — — — — 10,000

0.5 3.5

0.5 N/A

N/A 100

N/A 100

N/A N/A

N/A N/A

5,000 N/A

N/A N/A

10,000 N/A

Tested to meet or exceed EIA/TIA 568-B3 / Telcordia GR-409-CORE

Cable Length - Reel Size ITEM Reel Height (inches) Reel Outside Width (inches) Drum Diameter (inches) Reel Weight (lbs) CAPACITY: meters (feet) 4 Fiber Breakout 6 Fiber Breakout 8 Fiber Breakout 12 Fiber Breakout

REEL F 42 36 23 148 1,500 / (5,000) 1,500 / (5,000) 1,500 / (5,000) 1,500 / (5,000)

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00081, Revision 1, 2.6.12 Specifications are subject to change without notice.

54

Fiber Optic Cable

Indoor/Outdoor Riser Tight Buffered Cable Indoor/Outdoor Tight Buffered cables are specified for campus network cabling between buildings where interbuilding lengths are short enough that the installer can recognize savings from the lower costs of terminating tight buffered cables. For indoor applications the cable is OFNR listed. For outdoor applications the cable is manufactured with an outer jacket that incorporates a UV stabilizer for protection against exposure to the sun plus an anti-fungus protection for use in underground applications. Features

Cable Components

• Cables are water blocked and meet water penetration requirements of GR-20-CORE (this helps ensure that any damage to cable is restricted to a repairable length of several meters) • Outer jacket is moisture-resistant, fungus-resistent and UV resistant for outdoor use • With a Riser rating, this cable can be used in all environments: Riser, general inside plant and outside plant • Tested to meet or exceed EIA/TIA 568-A / GR-409-CORE and ICEA-S-104-696 • MSHA approved for mining applications • Compliant to Directive 2002/95/EC (RoHS) Mechanical Data AFL NO. CABLE TYPE

Indoor/Outdoor Tight Buffered Cable

RISER KR002481001 KR004481001 KR006531001 KR008561001 KR012651001 KR018801001 KR024871001

FIBER COUNT 2 4 6 8 12 18 24

NOMINAL DIAMETER INCHES (MM) 0.19 (4.8) 0.19 (4.8) 0.21 (5.3) 0.22 (5.6 ) 0.26 (6.5) 0.31 (8.0) 0.33 (8.7)

WEIGHT LBS/1000FT (KG/KM) 14 (21) 15 (23) 19 (28) 23 (33) 26 (38) 40 (59) 46 (69)

TENSION LBS (N) INSTALLATION 150 (660) 150 (660) 150 (660) 150 (660) 150 (660) 300 (1320) 300 (1320)

LONG TERM 45 (198) 45 (198) 45 (198) 45 (198) 45 (198) 90 (396) 90 (396)

BENDING RADIUS INCHES (CM) LONG INSTALLATION TERM 2.8 (7.2) 1.9 (4.8) 2.8 (7.2) 1.9 (4.8) 3.1 (8.0) 2.1 (5.3) 3.3 (8.4) 2.2 (5.6) 3.5 (9.0) 2.6 (6.5) 4.7 (12.0) 3.1 (8.0) 5.2 (13.1) 3.4 (8.7)

 Please specify fiber type when ordering (see below)

Temperature Specifications

5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 9 = 9/125 µm single-mode L = 50/125 µm multimode Laser-Link™ 300 for 10 Gigabit Ethernet K = Single-mode Futureguide SR-15e Bend Insensitive

TEMPERATURE RANGE OPERATING INSTALLATION STORAGE -40°C to -20°C to -40°C to +75°C +75°C +75°C

Contact Customer Service for special fiber types/performance needs. Standard jacket color is black. Other colors available by request.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00055, Revision 3, 9.28.11 Specifications are subject to change without notice.

55

Fiber Optic Cable

Indoor/Outdoor Riser Tight Buffered Cable Specifications CORE SIZE/ FIBER TYPE (6) 62.5 Giga-Link™ 300 (8) 62.5 Giga-Link™ 1000 (5) 50 Giga-Link™ 600 (7) 50 Giga-Link™ 2000 (A) 50 Laser-Link™ 150 (L) 50 Laser-Link™ 300 (C) 50 Laser-Link™ 550 (K) SM Futureguide SR-15e Bend Insensitive (ITU G.657.A) (9) SM (1) 100/140 Multimode

ISO/ IEC OM1 OM1 OM2 OM2 OM2 OM3 OM4 OS2 OS2

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1550 NM 3.5 1.2 N/A 3.5 1.2 N/A 3.5 1.5 N/A 3.5 1.2 N/A 3.0 1.2 N/A 3.0 1.2 N/A 3.0 1.2 N/A N/A 0.5 0.5 N/A 5.5

0.5 3.5

0.5 N/A

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 700 500 1500 500 3500 550 N/A N/A N/A 100

N/A 100

EMBc (MHZ•KM) N/A N/A N/A N/A 950 2000 4700 N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 800 550 1000 550 1040 550 N/A 5000 N/A N/A

5,000 N/A

10 GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM ­— 32 65 — 82 — 110 — 150 — 300 — 550 — N/A 10,000 N/A N/A

10,000 N/A

Tested to meet or exceed EIA/TIA 568-B3 / Telcordia GR-409-CORE

Maximum Cable Length - Reel Size ITEM Reel/Box Height (inches) Reel/Box Outside Width (inches) Drum Diameter (inches) Reel Weight (lbs) CAPACITY: METERS (FEET) 2 Fiber 4 Fiber 6 Fiber 8 Fiber 12 Fiber 18 Fiber 24 Fiber

FIBER BOX* 15.13 13.0 8.0 6.0

REEL A 16 15 8 10

REEL B 24 17 12 23

REEL C 30 15.25 12 34

REEL D 34 21.25 12 44

REEL E 34 20 24 48

305 (1,000) 305 (1,000) 305 (1,000) — — — —

1,000 (3,281) 1,000 (3,281) — — — — —

3,200 (10,500) 3,200 (10,500) 2,000 (6,561) 1,700 (5,577) 1,250 (4,100) — —

5,000 (16,404) 5,000 (16,404) 3,400 (11,154) 4,000 (9,514) 2,100 ( 6,890) — —

— — 5,000 (16,404) 5,000 (16,404) — — —

— — — — — 1,500 (4,921) 1,500 (4,921)

* Add suffix "– XMFBOX" to cable AFL number to specify "Fiber-In-A-Box" solution. "X" indicates length of cable in thousands of feet. Only available in standard lengths as indicated in chart above.

EXAMPLE: KR0029481001–3MFBOX Would be the resulting AFL number for 3,000 feet of KR002*481001 cable with 9/125 µm single-mode fiber and the Fiber-In-A-Box solution. Refer to Fiber-In-A-Box data.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00055, Revision 3, 9.28.11 Specifications are subject to change without notice.

56

Fiber Optic Cable

Indoor/Outdoor Plenum Distribution Cable Indoor/Outdoor Plenum Distribution cables are specified for campus network cabling between buildings where interbuilding lengths are short enough that the installer can recognize savings from the lower costs of terminating tight buffered cables. For indoor applications the cable is OFNP listed. For outdoor applications the cable is manufactured with an outer jacket that incorporates a UV stabilizer for protection against exposure to the sun plus an anti-fungus protection for use in underground applications. Cable Components

Features • Cables are water blocked and exceed water penetration requirements of ICEA S-104-696 and GR-20-CORE (this helps ensure that any damage to the cable and subsequent water ingress is restricted to a repairable length of several meters and minimizes overall replacement cost) • Outer jacket is moisture-resistant, fungus-resistant and UV resistant suitable for outdoor use • With an overall OFNP (Plenum) rating, this cable is suitable for installations in most spaces requiring UL flame ratings: Plenum, Riser, General Purpose and outside plant

Applications • ICEA S-104-696 • Telcordia GR-409-Core Issue II Weatherized Cable • EIA/TIA 568 • RoHS/REACH Compliant

Ordering Information AFL NO. KQ002*541801 KQ004*561801 KQ006*641801 KQ012*701801 KQ024*821801

FIBER COUNT 2 4 6 12 24

DIAMETER INCHES (MM) .21 (5.4) .22 (5.6) .25 (6.4) .28 (7.0) .33 (8.4)

WEIGHT LBS/1000FT (KG/KM) 19 (28) 21 (31) 26 (39) 34 (51) 42 (62)

TENSILE STRENGTH LBS (N) INSTALLATION LONG TERM 300 (1335) 90 (400) 300 (1335) 90 (400) 300 (1335) 90 (400) 300 (1335) 90 (400) 300 (1335) 90 (400)

BEND RADIUS INCHES (CM) INSTALLATION LONG TERM 3.2 (8.1) 2.1 (5.4) 3.30 (8.4) 2.2 (5.6) 3.8 (9.6) 2.5 (6.4) 4.1 (10.5) 2.8 (7.0) 5.0 (19.6) 3.3 (13.0)

 Please specify fiber type when ordering (see below) 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 9 = 9/125 µm single-mode L = 50/125 µm multimode Laser-Link™ 300 for 10 Gigabit Ethernet K = Single-mode Futureguide SR-15e Bend Insensitive

Temperature Specifications TEMPERATURE RANGE OPERATING INSTALLATION STORAGE -40°C to -10°C to -40°C to +70°C +70°C +70°C

Contact Customer Service for special fiber types/performance needs. Standard jacket color is black. Other colors available by request.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00124, Revision 1, 4.27.15 Specifications are subject to change without notice.

57

Fiber Optic Cable

Indoor/Outdoor Plenum Distribution Cable Specifications CORE SIZE/ FIBER TYPE (6) 62.5 Giga-Link™ 300 (8) 62.5 Giga-Link™ 1000 (5) 50 Giga-Link™ 600 (7) 50 Giga-Link™ 2000 (A) 50 Laser-Link™ 150 (L) 50 Laser-Link™ 300 (C) 50 Laser-Link™ 550 (K) SM Futureguide SR-15e Bend Insensitive (ITU G.657.A) (9) SM (1) 100/140 Multimode

ISO/ IEC OM1 OM1 OM2 OM2 OM2 OM3 OM4 OS2 OS2

OVERFILL LAUNCH MAXIMUM ATTENUATION MIN. BANDWIDTH (DB/KM) (MHZ•KM) 850 NM 1300 NM 1550 NM 850 NM 1300 NM 3.5 1.2 N/A 200 600 3.5 1.2 N/A 350 600 3.5 1.5 N/A 500 500 3.5 1.2 N/A 500 800 3.0 1.2 N/A 700 500 3.0 1.2 N/A 1500 500 3.0 1.2 N/A 3500 550 N/A 0.5 0.5 N/A N/A N/A 5.5

0.5 3.5

0.5 N/A

N/A 100

N/A 100

GIGABIT ETHERNET 10 GIGABIT ETHERNET MIN. LINK DISTANCE MIN. LINK DISTANCE (METERS) (METERS) EMBc (MHZ•KM) 850 NM 1300 NM 850 NM 1300 NM N/A 300 550 32 ­— N/A 500 1000 65 — N/A 600 600 82 — N/A 750 2000 110 — 950 800 550 150 — 2000 1000 550 300 — 4700 1040 550 550 — N/A N/A 5000 N/A 10,000 N/A N/A

N/A N/A

5,000 N/A

N/A N/A

10,000 N/A

Tested to meet or exceed EIA/TIA 568-B3 / Telcordia GR-409-CORE

Maximum Cable Length - Reel Size ITEM Reel/Box Height (inches) Reel/Box Outside Width (inches) Drum Diameter (inches) Reel Weight (lbs) CAPACITY: METERS (FEET) 2 Fiber 4 Fiber 6 Fiber 8 Fiber 12 Fiber 18 Fiber 24 Fiber

FIBER BOX* 15.13 13.0 8.0 6.0

REEL A 16 15 8 10

REEL B 24 17 12 23

305 (1,000) 305 (1,000) 305 (1,000) — — — —

1,000 (3,281) 1,000 (3,281) — — — — —

3,200 (10,500) 3,200 (10,500) 2,400 (7,874) 2,400 (7,874) 1,300 (4,265) — —

REEL C 30 15.25 12 34 5,000 5,000 4,000 4,000 2,100

(16,404) (16,404) (13,123) (13,123) ( 6,890) — —

REEL D 34 21.25 12 44

REEL E 34 20 24 48

— — 5,000 (16,404) 5,000 (16,404) 3,900 (12,795) — —

— — — — — 1,500 (4,921) 1,500 (4,921)

* Add suffix "– XMFBOX" to cable AFL number to specify "Fiber-In-A-Box" solution. "X" indicates length of cable in thousands of feet. Only available in standard lengths as indicated in chart above.

EXAMPLE: KQ0029541001–1MFBOX Would be the resulting AFL number for 3,000 feet of KQ002*541001 cable with 9/125µm single-mode fiber and the Fiber-In-A-Box solution. Refer to Fiber-In-A-Box data.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00124, Revision 1, 4.27.15 Specifications are subject to change without notice.

58

Fiber Optic Cable

Indoor/Outdoor Multi-unit Riser Tight Buffered Cable AFL now offers high fiber count Indoor/Outdoor Riser Cables. Waterblocked 12-fiber sub-units are helically stranded to provide sub-unitized cables ranging from 24 to 72 fiber counts. These cables are OFNR listed for indoor applications. Both the sub-unit jackets and outer sheath contain a UV stabilizer and anti-fungus protection for use in outdoor applications. Sub-units contain a water-swellable aramid and 12 tight buffered fibers. Features • Sub-units are water blocked and meet water penetration requirements of GR-20-CORE (this helps ensure that any damage to cable is restricted to a repairable length of several meters) • Outer jacket is moisture-resistant, fungus-resistent and UV resistant for outdoor use

• With a Riser rating, this cable can be used in all environments: Riser, general inside plant and outside plant • Sub-units are tested to meet or exceed EIA/TIA 568-A / GR-409-CORE and ICEA-S-104-696 • Compliant to Directive 2002/95/EC (RoHS) • MSHA approved for mining applications

Cable Components

Mechanical Data AFL NO. CABLE TYPE Indoor/Outdoor Tight Buffered Cable

RISER KR024601001 KR036601001 KR048601001 KR060601001 KR072601001

FIBER COUNT 24 36 48 60 72

NOMINAL DIAMETER INCHES (MM) 0.67 (16.9) 0.67 (16.9) 0.67 (16.9) 0.76 (19.2) 0.81 (20.7)

WEIGHT LBS/1000 FT (KG/KM) 169 (252) 178 (265) 187 (278) 197 (293) 233 (346)

TENSION LBS (N)

BENDING RADIUS INCHES (CM)

INSTALLATION LONG TERM INSTALLATION LONG TERM 300 (1320) 90 (396) 10.0 (25.3) 6.7 (16.9) 300 (1320) 90 (396) 10.0 (25.3) 6.7 (16.9) 300 (1320) 90 (396) 10.0 (25.3) 6.7 (16.9) 300 (1320) 90 (396) 11.3 (28.8) 7.6 (19.2) 300 (1320) 90 (396) 12.2 (31.0) 8.1 (20.7)

 Please specify fiber type when ordering (see below)

Temperature Specifications

5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 9 = 9/125 µm single-mode L = 50/125 µm multimode Laser-Link™ 300 for 10 Gigabit Ethernet K = Single-mode Futureguide SR-15e Bend Insensitive

TEMPERATURE RANGE OPERATING INSTALLATION STORAGE -40°C to -20°C to -40°C to +75°C +75°C +75°C

Contact Customer Service for special fiber types/performance needs. Standard jacket color is black. Other colors available by request.

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00052, Revision 2, 9.28.11 Specifications are subject to change without notice.

59

Fiber Optic Cable

Indoor/Outdoor Multi-unit Riser Tight Buffered Cable Specifications

CORE SIZE/ FIBER TYPE (6) 62.5 Giga-Link™ 300 (8) 62.5 Giga-Link™ 1000 (5) 50 Giga-Link™ 600 (7) 50 Giga-Link™ 2000 (A) 50 Laser-Link™ 150 (L) 50 Laser-Link™ 300 (C) 50 Laser-Link™ 550 (K) SM Futureguide SR-15e Bend Insensitive (ITU G.657.A) (9) SM (1) 100/140 Multimode

ISO/ IEC OM1 OM1 OM2 OM2 OM2 OM3 OM4 OS2

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1550 NM 3.5 1.2 N/A 3.5 1.2 N/A 3.5 1.5 N/A 3.5 1.2 N/A 3.0 1.2 N/A 3.0 1.2 N/A 3.0 1.2 N/A N/A 0.5 0.5

OS2

N/A 5.5

0.5 3.5

0.5 N/A

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 700 500 1500 500 3500 550 N/A N/A N/A 100

N/A 100

EMBc (MHZ•KM) N/A N/A N/A N/A 950 2000 4700 N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 800 550 1000 550 1040 550 N/A 5000 N/A N/A

10 GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 32 ­— 65 — 82 — 110 — 150 — 300 — 550 — N/A 10,000

5,000 N/A

N/A N/A

10,000 N/A

Tested to meet or exceed EIA/TIA 568-B3 / Telcordia GR-409-CORE

Cable Length - Reel Size ITEM Reel Height (inches) Reel Outside Width (inches) Drum Diameter (inches) Reel Weight (lbs) CAPACITY: METERS (FEET) 18 Fibers 24 Fibers 36 Fibers 48 Fibers 60 Fibers 72 Fibers

REEL F 42 36 23 148

REEL G 60 36 30 287

2,300 (7,546) 2,300 (7,546) 1,600 (5,250) 1,500 (4,921) 1,250 (4,100) 1,000 (3,280)

2,500 / (8,200) 2,500 / (8,200) 2,500 / (8,200) — 1,500 / (4,921) 1,500 / (4,921)

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00052, Revision 2, 9.28.11 Specifications are subject to change without notice.

60

Fiber Optic Cable

Tactical Tight Buffered Cable AFL Tactical Tight Buffered Cables are ideal for use in installations where extreme environmental conditions are present. Designed to be deployed and retrieved in the field, AFL’s Tactical Tight Buffered Cables are highly resistant to damage caused by repeated impacts or harsh conditions. Applications Field deployment in abusive environments Temporary installation of critical communications lines where quick retrieval and re-use is necessary

Features Cut resistant, Flame Retardant Polyurethane outer jacket Highly flexible construction allows for multiple deployments All aramid strength members Performance in wide temperature range High impact and crush resistance Durable in high traffic areas MIL-PRF-46291 qualified fiber available (-RH designation) Tested to meet or exceed EIA/TIA 568-B3, Telecordia GR-409-CORE, ANSI/ICEA S-83-596 and ANSI/ICEA S-104-696 Two- and four-fiber cables designed to meet MIL-PRF-85045

High Traffic areas Security and Sensing applications Broadcast deployments Installations in harsh environments

Cable Components Polyurethane outer jacket aramid strength member 250 µm or 500 µm optical fiber 900 µm Elastomeric Tight Buffer

Specifications CHARACTERISTIC Tensile and elongation Operating tensile strength Low-temp flexibility Cyclic flexing Crush resistance Impact Temperature cycling Temperature/humidity cycling Life aging Freezing water immersion

Temperature Range Operating: -56ºC to +85ºC Installation: -20ºC to +85ºC

TEST PROCEDURE EIA/TIA-455-33 EIA/TIA-455-33 EIA/TIA-455-37 EIA/TIA-455-104 EIA/TIA-455-41 EIA/TIA-455-25 EIA/TIA-455-3 EIA/TIA-455-5 Method B EIA/TIA-455-4 EIA/TIA-455-98

PERFORMANCE

2000 2000 N/cm 200 -46°C to 85°C

Ordering Information AFL NO. XU00130180G XU00258180G XU00458180G

FIBER COUNT 1 2 4

NOMINAL DIA. INCHES 0.12 0.23 0.23

(MM) (2.9) (5.8) (5.8)

NOMINAL WT. LBS/1000FT 5.4 21.5 21.5

(KG/KM) (8) (32) (32)

MAXIMUM TENSILE LOAD LBS (N) INSTALLATION LONG TERM 250 (1112) 75 (334) 375 (1668) 150 (667) 375 (1668) 150 (667)

MINIMUM BEND RADIUS INCHES (CM) INSTALLATION LONG TERM 1.5 (3.8) 1.25 (3.2) 3.25 (8.3) 2.25 (5.7) 3.25 (8.3) 2.25 (5.7)

Note: Diameter and weight subject to change without notice Replace asterisk () in AFL number with number corresponding below. 5 = 50/125 µm multimode GIGA-Link™ 600 6 = 62.5/125 µm multimode GIGA-Link™ 300 9 = Single-mode K = SM Futureguide SR-15e Bend Insensitive

Fiber Notes/Options G = Elastomer over 500 µm – RH = Indicates Radiation Hardened Fiber

www.AFLglobal.com or (800) 235-3423

© 2007, AFL, all rights reserved. PP-1-00066, Revision 2.5 9.20.11 Specifications are subject to change without notice.

61

Fiber Optic Cable

Uniflex® Indoor/Outdoor Loose Tube Cable Single tube products allow for installations that require a high degree of flexibility combined with a small cable diameter. AFL has designed a cable that has all the characteristics of stranded loose tube cables from a mechanical and environmental standpoint, combined with the high flexibility and small diameter requirements of real world installations. This cable is the ultimate solution for flexible, connectorized applications, as well as crowded ducts in existing fiber applications, and can be lashed to an aerial messenger. Uniflex Indoor/Outdoor cable not only services the outside plant environment, but also qualifies as an Indoor/ Outdoor cable, allowing potential cost savings with fewer splice points. Uniflex Indoor/ Outdoor complies with EIA/TIA standards and is listed for OFNR use per UL standards. Cable Components

outer jacket

Product Applications • OFNR • Service (Drop) Cables • Building Interconnections (Campus LAN) • Connectorized Trunking Cables • Distance Learning • Distribution • MSHA Approved for Mining Applications

buffer tube optical fiber water blocking gel ripcord

Maximum Lengths

Temperature Range

NOMINAL DIAMETER MM 8.4

Operating: -40ºC to +70ºC Storage:

strength elements

-40ºC to +75ºC

Installation: -30ºC to +70ºC

REEL A (42 x 36 x 23) FEET METERS 16,400 4,995

REEL B (58 x 36 x 28) FEET METERS 27,500 8,400

Ordering Information

AFL NO. LV00221100N1 LV00441100N1 LV00661100N1 LV00881100N1 LV010A1100N1 LV012C1100N1

FIBER COUNT 2 4 6 8 10 12

NOMINAL DIAMETER INCHES (MM)

0.33

(8.4)

NOMINAL WEIGHT LBS/1000FT (KG/KM)

50

MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS LBS (N) INCHES (CM) SHORT TERM LONG TERM SHORT TERM LONG TERM

(75)

600 (2670)

200 (890)

6.7 (17.0)

3.5 (9.0)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode K = SM Futureguide SR-15e Bend Insensitive

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00025, Revision 2, 9.28.11 Specifications are subject to change without notice.

62

Fiber Optic Cable

Riser Single-Jacket I/O Loose Tube (LV Series SJ) Indoor/outdoor stranded loose tube combines the robust mechanical and environmental characteristics of an outside plant cable with the flexibility of an inside plant riser cable. By installing indoor/outdoor stranded loose tube, costly splice locations entering into a building are avoided, being routed directly from the outside plant to telecommunications closets, or main distribution frames (MDF) through the riser of a building and eliminating the "50-foot rule." Indoor/Outdoor Stranded Design loose tube cable is moisture and U.V. resistant, S-Z stranded for easy mid-span access, listed for OFNR use per UL standards, and can be used in both duct and lashed applications. Applications • • • • • • •

Building Interconnections (Campus LAN) Trunking Lines Direct to Telecommunications Closet Local Loop Distance Learning Distribution Intrabuilding Backbones MSHA Approved for Mining Applications

Cable Components

PVC jacket strength elements binder water blocking system FRP central member optical fiber rip cord gel-filled loose buffer tube

Temperature Range Operating: -40ºC to +70ºC Storage:

-40ºC to +75ºC

Installation: -30ºC to +70ºC

Typical Lengths MAXIMUM LENGTHS* SINGLE-MODE FEET METERS 22,900 7,000

FIBER COUNT 6 - 144

FEET 22,900

MULTIMODE METERS 7,000

* Longer lengths may be available.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50 Laser-Link™ 300 (9) Single-mode (K) SM Futureguide SR-15e Bend Insensitive (ITU G.657.A)

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A 5000

Gigabit Ethernet Minimum Link Distances are based on "bandwidth"/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00010, Revision 3, 6.10.14 Specifications are subject to change without notice.

63

Fiber Optic Cable

Riser Single-Jacket I/O Loose Tube (LV Series SJ) Ordering Information NOMINAL DIAMETER AFL NO. LV006C5101N1 LV012C5101N1 LV018C5101N1 LV024C5101N1 LV030C5101N1 LV036C5101N1 LV048C5101N1 LV060C5101N1 LV072C6101N1 LV084C8101N1 LV096C8101N1 LV108CA101N1 LV120CA101N1 LV132CC101N1 LV144CC101N1

FIBER NUMBER OF COUNT TUBES/FIBERS 6 1w/6 (4 fillers) 12 1w/12 (4 fillers) 18 1w/12, 1w/6 (3 fillers) 24 2w/12 (3 fillers) 30 2w/12, 1w/6 (2 fillers) 36 3w/12 (2 fillers) 48 4w/12 (1 filler) 60 5w/12 (No fillers) 72 6w/12 (No fillers) 84 7w/12 (1 filler) 96 8w/12 (No fillers) 108 9w/12 (1 filler) 120 10w/12 (No fillers) 132 11w/12 (1 filler) 144 12w/12 (No fillers)

NOMINAL WEIGHT LBS/1,000 FT (KG/KM) 107 (159) 108 (160) 108 (161) 108 (161) 109 (162) 109 (162) 110 (164) 111 (165) 128 (190) 158 (236) 159 (237) 197 (294) 198 (295) 242 (360) 243 (361)

INCHES (MM) 0.51 (12.9) 0.51 (12.9) 0.51 (12.9) 0.51 (12.9) 0.51 (12.9) 0.51 (12.9) 0.51 (12.9) 0.51 (12.9) 0.54 (13.7) 0.61 (15.5) 0.61 (15.5) 0.69 (17.4) 0.69 (17.4) 0.76 (19.3) 0.76 (19.3)

MAXIMUM TENSILE LOAD

MINIMUM BEND RADIUS

LBS. (N)

INCHES (CM)

SHORT TERM LONG TERM SHORT TERM LONG TERM 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700) 600 (2700)

200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890)

10.2 (26) 10.2 (26) 10.2 (26) 10.2 (26) 10.2 (26) 10.2 (26) 10.2 (26) 10.2 (26) 10.8 (28) 12.2 (31) 12.2 (31) 14.0 (35) 14.0 (35) 15.2 (39) 15.2 (39)

5.1 (13) 5.1 (13) 5.1 (13) 5.1 (13) 5.1 (13) 5.1 (13) 5.1 (13) 5.1 (13) 5.4 (14) 6.1 (16) 6.1 (16) 7.0 (18) 7.0 (18) 7.6 (20) 7.6 (20)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight With Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL typically provides Loose Tube cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request. Larger reel sizes may be required to accomodate long cable lengths.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00010, Revision 3, 6.10.14 Specifications are subject to change without notice.

64

Fiber Optic Cable

Uniflex® Non-Armored Loose Tube Cable AFL’s non-armored Uniflex® is a central loose tube cable used for duct and low fiber drop applications. Cable Components outer jacket strength elements buffer tube optical fiber water blocking gel ripcord

Temperature Range Operating: -40ºC to +70ºC Storage:

-40ºC to +75ºC

Maximum Lengths

Installation: -30ºC to +70ºC

NOMINAL DIAMETER MM 7.8

Product Applications

REEL A (42 x 32 x 23) FEET METERS 19,000 5,790

REEL B (58 x 32 x 28) FEET METERS 27,500 8,400

• Service (Drop) Cables • Building Interconnections (Campus LAN) • Connectorized Trunking Cables • Distance Learning • Distribution Ordering Information

AFL NO. LE00221100N1 LE00441100N1 LE00661100N1 LE00881100N1 LE010A1100N1 LE012C1100N1

FIBER COUNT 2 4 6 8 10 12

NOMINAL DIAMETER INCHES (MM)

NOMINAL WEIGHT LBS/1,000FT (KG/KM)

0.31 (7.8)

34 (50)

MAXIMUM TENSILE LOAD

MINIMUM BEND RADIUS

LBS (N) SHORT TERM LONG TERM

INCHES (CM) SHORT TERM LONG TERM

600 (2670)

200 (890)

6.3 (16.0)

3.1 (8.0)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode K = SM Futureguide SR-15e Bend Insensitive

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00026, Revision 2, 9.28.11 Specifications are subject to change without notice.

65

Fiber Optic Cable

Uniflex® Armored Loose Tube Cable AFL’s Armored Uniflex cable is a central loose tube product used in various outside plant applications. Its compact design holds up to 12 fibers. The corrugated steel armor provides additional mechanical protection and also serves as toneable element within the cable. Product Applications • Service (Drop) Cables • Building Interconnections (Campus LAN) • Connectorized Trunking Cables

• Distance Learning • Distribution

Cable Components

Temperature Range

outer jacket strength elements

Operating: -40ºC to +70ºC Storage:

buffer tube

-40ºC to +75ºC

optical fiber

Installation: -30ºC to +70ºC

water blocking gel ripcord corrugated steel armoring

Maximum Lengths NOMINAL DIAMETER MM 12.2

REEL A (42 x 32 x 23) FEET METERS 7,700 2,345

REEL B (58 x 32 x 28) FEET METERS 18,250 5,560

REEL C (66 x 36 x 36) FEET METERS 24,400 7,435

* Maximum lengthof 27,500 feet available on larger reels.

Ordering Information

AFL NO. LE00221200S1 LE00441200S1 LE00661200S1 LE00881200S1 LE010A1200S1 LE012C1200S1

FIBER COUNT 2 4 6 8 10 12

NOMINAL DIAMETER INCHES (MM)

NOMINAL WEIGHT LBS/1,000FT (KG/KM)

0.48 (12.2)

95 (140)

MAXIMUM TENSILE LOAD LBS (N) SHORT TERM LONG TERM

600 (2670)

200 (890)

MINIMUM BEND RADIUS INCHES (CM) SHORT TERM LONG TERM

9.6 (25.0)

4.8 (13.0)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode K = SM Futureguide SR-15e Bend Insensitive

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00024, Revision 2, 9.28.11 Specifications are subject to change without notice.

66

Fiber Optic Cable

Heavy Duty Uniflex® Loose Tube Cable AFL’s Heavy Duty Uniflex loose tube cable features a central tube design and thicker-walled jacket. Often used in connectorized cable assemblies, it holds up to 12 fibers. Product Applications • Service (Drop) Cables • Building Interconnections (Campus LAN) • Connectorized Trunking Cables

• Distance Learning • Distribution

Cable Components

polyn outer jacket strength elements

Temperature Range

buffer tube

Operating: -40ºC to +70ºC Storage:

optical fiber

-40ºC to +75ºC

ripcord

Installation: -30ºC to +70ºC

water blocking gel

Ordering Information

AFL NO. LU00221200N1 LU00441200N1 LU00661200N1 LU00881200N1 LU010A1200N1 LU012C1200N1

FIBER COUNT 2 4 6 8 10 12

NOMINAL DIAMETER INCHES (MM)

NOMINAL WEIGHT LBS/1,000 FT (KG/KM)

0.366 (9.3)

40 (65)

Note: Diameter and weight subject to change without notice  Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 6 = 62.5/125 µm multimode GIGA-Link™ 300 7 = 50/125 µm multimode GIGA-Link™ 2000 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode K = SM Futureguide SR-15e Bend Insensitive

MAXIMUM TENSILE LOAD LBS. (N) SHORT TERM LONG TERM

600 (2670)

200 (890)

MINIMUM BEND RADIUS INCHES (CM) SHORT TERM LONG TERM

7.5 (19.0)

3.7 (9.5)

Maximum Lengths NOMINAL DIAMETER MM 7.8 9.3

REEL A (42 x 36 x 23) FEET METERS 19,000 5,790 13,300 4,050

www.AFLglobal.com or (800) 235-3423

REEL B (58 x 36 x 28) FEET METERS 27,500 8,400 27,500 8,400

© 2002, AFL, all rights reserved. PP-1-00008, Revision 2, 9.28.11 Specifications are subject to change without notice.

67

Fiber Optic Cable

Non-Armored OSP Loose Tube (LE Series SJ) Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Non-Armored Loose Tube fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations. With fiber counts up to 576 and S-Z strand designs for easy mid-span access, AFL’s cables comply with EIA/TIA, REA/RUS PE-90 and GR-20. Industry standard designs combined with innovative technologies, such as a dry core product, yield a world class cable that will support today’s and tomorrow’s technological needs. Cable Components

Product Applications • Long Haul Networking • Building Interconnections (Campus LAN) • Trunking Lines Direct to Telecommunications Closet • Local Loop • Distance Learning • Distribution • Intrabuilding Backbones Temperature Range Operating: -40ºC to +70ºC Storage:

-40ºC to +75ºC

Installation: -30ºC to +70ºC

Typical Lengths MAXIMUM LENGTHS* FIBER COUNT 6 - 60 72 - 96 108 -120 132 - 144 146 - 216 218 - 288 290 - 432 434 - 576

SINGLE-MODE FEET METERS 22,900 7,000 22,900 7,000 22,900 7,000 22,900 7,000 22,900 7,000 16,400 5,000 14,100 4,300 10,800 3,300

FEET 22,900 22,900 22,900 22,900 22,900 16,400 14,000 11,000

MULTIMODE METERS 7,000 7,000 7,000 7,000 7,000 5,000 4,300 3,300

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link™ 300 (9) Single-mode (Q) Non-zero Dispersion-shifted Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A N/A 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A N/A N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00016, Revision 5, 7.17.14 Specifications are subject to change without notice.

68

Fiber Optic Cable

Non-Armored OSP Loose Tube (LE Series SJ) Ordering Information

AFL NO. LE006C5101N1 LE012C5101N1 LE018C5101N1 LE024C5101N1 LE030C5101N1 LE036C5101N1

FIBER COUNT 6 12 18 24 30 36

NUMBER OF TUBES/FIBERS 1w/6 (4 fillers) 1w/12 (4 fillers) 1w/12,1w/6 (3 fillers) 2w/12 (3 fillers) 2w/12,1w/6 (2 fillers) 3w/12 (2 fillers)

LE048C5101N1 LE060C5101N1 LE072C6101N1 LE084C8101N1 LE096C8101N1 LE108CA101N1 LE120CA101N1 LE132CC101N1 LE144CC101N1 LE216CI301N1 LE288CO301N1 LE432IO301N1 LE576OO301N1

48 60 72 84 96 108 120 132 144 216 288 432 576

4w/12 (1 filler) 5w/12 (no fillers) 6w/12 (no fillers) 7w/12 (1 filler) 8w/12 (no fillers) 9w/12 (1 filler) l0w/12 (no fillers) 11w/12 (1 filler) 12w/12 (no fillers) 18w/12 (no fillers) 24w/12 (no fillers) 24w/18 (no fillers) 24w/24 (no fillers)

NOMINAL DIAMETER INCHES MM 0.41 10.5 0.41 10.5 0.41 10.5 0.41 10.5 0.41 10.5 0.41 10.5 0.41 0.41 0.45 0.52 0.52 0.59 0.59 0.67 0.67 0.69 0.79 0.87 1.00

MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS NOMINAL WEIGHT LBS (N) INCHES (CM) LBS/1,000FT KG/KM SHORT TERM LONG TERM SHORT TERM LONG TERM 56 83 600 (2670) 200 (890) 8.2 (21) 4.1 (11) 56 84 600 (2670) 200 (890) 8.2 (21) 4.1 (11) 57 85 600 (2670) 200 (890) 8.2 (21) 4.1 (11) 57 85 600 (2670) 200 (890) 8.2 (21) 4.1 (11) 58 86 600 (2670) 200 (890) 8.2 (21) 4.1 (11) 58 86 600 (2670) 200 (890) 8.2 (21) 4.1 (11)

10.5 10.5 11.5 13.3 13.3 15.1 15.1 17.0 17.0 17.4 20.1 22.0 25.3

59 60 71 90 91 117 118 147 148 150 202 242 319

87 89 106 135 136 174 175 219 220 224 301 360 475

600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670)

200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890)

8.2 (21) 8.2 (21) 9.0 (22) 10.4 (27) 10.4 (27) 11.8 (31) 11.8 (31) 13.4 (34) 13.4 (34) 14.0 (35) 17.3 (41) 17.4 (44) 20.1 (51)

4.1 (11) 4.1 (11) 4.5 (11.5) 5.2 (14) 5.2 (14) 5.9 (16) 5.9 (16) 6.7 (17) 6.7 (17) 6.9 (18) 7.9 (21) 8.7 (22) 10.2 (26)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 9 = Single-mode L = 50/125 µm multimode Laser-Link™ 300 K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight With Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL typically provides Loose Tube cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request. Larger reel sizes may be required to accomodate long cable lengths.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00016, Revision 5, 7.17.14 Specifications are subject to change without notice.

69

Fiber Optic Cable

Non-Armored Loose Tube Cable – Double Jacket (LE Series DJ)

Product Applications • Long Haul Networking • Building Interconnections (Campus LAN) • Trunking Lines Direct to Telecommunications Closet • Local Loop • Distance Learning • Distribution • Intrabuilding Backbones

Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Non-Armored Double Jacket Loose Tube fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations while incorporating a second jacket when extra mechanical protection is desired. With fiber counts up to 576 and S-Z strand designs for easy mid-span access, AFL’s cables comply with EIA/TIA, REA/RUS PE-90 and GR-20. Industry standard designs combined with innovative technologies, such as a dry core product, yield a world class cable that will support today’s and tomorrow’s technological needs. Cable Components

Temperature Range Operating: -40ºC to +70ºC Storage:

Typical Lengths MAXIMUM LENGTHS* FIBER COUNT 6 - 60 72 - 96 108 -120 132 - 144 146 - 216 218 - 288 290 - 432 434 - 576

-40ºC to +75ºC

Installation: -30ºC to +70ºC

SINGLE-MODE FEET METERS 22,900 7,000 22,900 7,000 22,900 7,000 22,900 7,000 17,000 5,200 15,000 4,600 10,800 3,300 6,500 2,000

FEET 22,900 22,900 22,900 22,900 17,000 15,000 10,800 6,500

MULTIMODE METERS 7,000 7,000 7,000 7,000 5,200 4,600 3,300 2,000

* Longer lengths may be available upon request.

Optical Information MAXIMUM ATTENUATION (DB/KM) FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link™ 300 (9) Single-mode (K) SM Futureguide SR-15e Bend Insensitive

850 NM 3.5 3.5 2.9 2.9 2.9 N/A N/A

1300 NM 1310 NM 1550 NM 1.2 N/A N/A 1.2 N/A N/A 0.9 N/A N/A 0.9 N/A N/A 0.9 N/A N/A N/A 0.35 0.25 N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 200 350 500 500 1500 N/A N/A

1300 NM 600 600 500 800 500 N/A N/A

GIGABIT ETHERNET MINIMUM LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00015, Revision 5, 1.26.15 Specifications are subject to change without notice.

70

Fiber Optic Cable

Non-Armored Loose Tube Cable – Double Jacket (LE Series DJ) Ordering Information

AFL NO. LE006C5111N1 LE012C5111N1 LE018C5111N1 LE024C5111N1 LE030C5111N1 LE036C5111N1 LE048C5111N1 LE060C5111N1 LE072C6111N1 LE084C8111N1 LE096C8111N1 LE108CA111N1 LE120CA111N1 LE132CC111N1 LE144CC111N1 LE216CI311N1 LE288CO311N1 LE432IO311N1 LE576OO311N1

FIBER COUNT 6 12 18 24 30 36 48 60 72 84 96 108 120 132 144 216 288 432 576

NUMBER OF TUBES/FIBERS 1w/6 (4 fillers) 1w/12 (4 fillers) 1w/12,1w/6 (3 fillers) 2w/12 (3 fillers) 2w/12,1w/6 (2 fillers) 3w/12 (2 fillers) 4w/12 (1 filler) 5w/12 (no fillers) 6w/12 (no fillers) 7w/12 (1 filler) 8w/12 (no fillers) 9w/12 (1 filler) 10w/12 (no fillers) 11w/12 (1 filler) 12w/12 (no fillers) 18w/12 (no fillers) 24w/12 (no fillers) 24w/18 (no fillers) 24w/24 (no fillers)

NOMINAL DIAMETER INCHES MM 0.49 12.5 0.49 12.5 0.49 12.5 0.49 12.5 0.49 12.5 0.49 12.5 0.49 12.5 0.49 12.5 0.53 13.4 0.60 15.2 0.60 15.2 0.67 17.1 0.67 17.1 0.75 19.0 19.0 0.75 0.76 19.3 0.87 22.0 0.94 23.9 27.3 1.08

MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS NOMINAL WEIGHT LBS (N) INCHES (CM) LBS/1,000FT KG/KM SHORT TERM LONG TERM SHORT TERM LONG TERM 79 118 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 80 119 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 81 120 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 81 120 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 82 121 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 82 121 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 83 123 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 84 125 600 (2670) 200 (890) 9.8 (25) 4.9 (13) 97 144 600 (2670) 200 (890) 10.6 (27) 5.3 (14) 120 178 600 (2670) 200 (890) 12.0 (31) 6.0 (16) 121 180 600 (2670) 200 (890) 12.0 (31) 6.0 (16) 150 222 600 (2670) 200 (890) 13.4 (34) 6.7 (17) 151 224 600 (2670) 200 (890) 13.4 (34) 6.7 (17) 184 273 600 (2670) 200 (890) 15.0 (38) 7.5 (19) 185 275 600 (2670) 200 (890) 15.0 (38) 7.5 (19) 188 280 600 (2670) 200 (890) 15.2 (39) 7.6 (20) 245 365 600 (2670) 200 (890) 17.4 (44) 8.7 (22) 289 430 600 (2670) 200 (890) 18.8 (48) 9.4 (24) 372 554 600 (2670) 200 (890) 21.4 (55) 10.7 (28)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight With Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL typically provides Loose Tube cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request. Larger reel sizes may be required to accomodate long cable lengths.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00015, Revision 5, 1.26.15 Specifications are subject to change without notice.

71

Fiber Optic Cable

Single-Jacket Single-Armor OSP Loose Tube (LE Series SASJ) Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Armored Loose Tube Single Jacket/Single Armor fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations, including direct buried. With fiber counts up to 288 and S-Z strand designs for easy mid-span access, AFL’s cables comply with EIA/TIA, REA/RUS PE-90 and GR-20. Industry standard designs combined with innovative technologies, such as a dry core product, yield a world class cable that will support today’s and tomorrow’s technological needs. Product Applications

Cable Components

• Long Haul Networking • Building Interconnections (Campus LAN) • Trunking Lines Direct to Telecommunications Closet • Local Loop • Distance Learning • Distribution • Intrabuilding Backbones

Polyethylene outer jacket Optical fiber Gel-filled loose buffer tube Corrugated steel armoring FRP central member Ripcord Water-blocking system

Temperature Range Operating: -40ºC to +70ºC Storage:

-40ºC to +75ºC

Typical Lengths MAXIMUM LENGTHS*

Installation: -30ºC to +70ºC

SINGLE-MODE FIBER COUNT 6 - 288

MULTIMODE

FEET

METERS

FEET

METERS

19,686

6,000

19,686

6,000

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link™ 300 (9) Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A 5000

Gigabit Ethernet Minimum Link Distances are based on "bandwidth"/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00004, Revision 7, 6.17.15 Specifications are subject to change without notice.

72

Fiber Optic Cable

Single-Jacket Single-Armor OSP Loose Tube (LE Series SASJ) Ordering Information NOMINAL DIAMETER AFL NO. LE006C5201S1 LE012C5201S1 LE018C5201S1 LE024C5201S1 LE030C5201S1 LE036C5201S1 LE048C5201S1 LE060C5201S1 LE072C6201S1 LE084C8201S1 LE096C8201S1 LE108CA201S1 LE120CA201S1 LE132CC201S1 LE144CC201S1 LE192O8201S1 LE288OC201S1

FIBER COUNT 6 12 18 24 30 36 48 60 72 84 96 108 120 132 144 192 288

NUMBER OF TUBES/FIBERS 1w/6 (4 fillers) 1w/12 (4 fillers) 1w/12,1w/6 (3 fillers) 2w/12 (3 fillers) 2w/12,1w/6 (2 fillers) 3w/12 (2 fillers) 4w/12 (1 filler) 5w/12 (no fillers) 6w/12 (no fillers) 7w/12 (1 filler) 8w/12 (no fillers) 9w/12 (1 filler) 10w/12 (no fillers) 11w/12 (1 filler) 12w/12 (no fillers) 8 w/24 (no fillers) 12 w/24 (no fillers)

INCHES 0.52 0.52 0.52 0.52 0.52 0.52 0.52 0.52 0.56 0.63 0.63 0. 70 0. 70 0. 78 0. 78 0.63 0.78

MM 13.3 13.3 13.3 13.3 13.3 13.3 13.3 13.3 14.2 16.0 16.0 17.8 17.8 19.7 19.7 16.0 19.7

NOMINAL WEIGHT LBS/1,000FT 102 102 103 103 104 104 105 106 120 146 147 176 177 213 214 152 219

KG/KM 152 152 153 154 155 155 157 158 179 218 219 262 264 317 319 226 326

MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS LBS (N) INCHES (CM) SHORT SHORT TERM LONG TERM TERM LONG TERM 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 10.7 (28) 5.4 (14) 600 (2670) 200 (890) 11.4 (29) 5.7 (15) 600 (2670) 200 (890) 12.8 (33) 6.4 (16.3) 600 (2670) 200 (890) 12.8 (33) 6.4 (16.3) 600 (2670) 200 (890) 14.2 (37) 7.1 (18) 600 (2670) 200 (890) 14.2 (37) 7.1 (18) 600 (2670) 200 (890) 15.7 (40) 7.9 (20) 600 (2670) 200 (890) 15.7 (40) 7.9 (20) 600 (2670) 200 (890) 12.8 (33) 6.4 (163) 600 (2670) 200 (890) 15.7 (40) 7.9 (20)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode K = SM Futureguide SR-15e Bend Insensitive

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight With Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL typically provides Loose Tube cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request. Larger reel sizes may be required to accomodate long cable lengths.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00004, Revision 7, 6.17.15 Specifications are subject to change without notice.

73

Fiber Optic Cable

Double-Jacket Single-Armor OSP Loose Tube (LE Series SADJ) Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Armored Loose Tube Double Jacket/Single Armor fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations, including direct buried. With fiber counts up to 144 and S-Z strand designs for easy mid-span access, AFL’ cables comply with EIA/TIA, REA/RUS PE-90 and GR-20. Industry standard designs combined with innovative technologies, such as a dry core product, yield a world class cable that will support today’s and tomorrow’s technological needs.

Product Applications

Cable Components

• Long Haul Networking • Building Interconnections (Campus LAN) • Trunking Lines Direct to Telecommunications Closet • Local Loop • Distance Learning • Distribution • Intrabuilding Backbones

Temperature Range

Typical Lengths

Operating: -40ºC to +70ºC

MAXIMUM LENGTHS*

Storage:

-40ºC to +75ºC

Installation: -30ºC to +70ºC

SINGLE-MODE FEET METERS 20,000 6,000 14,700 4,500 13,000 4,000 11,100 3,400

FIBER COUNT 6 - 72 84 - 96 108 -120 132 - 144

FEET 20,000 14,700 13,000 11,100

MULTIMODE METERS 6,000 4,500 4,000 3,400

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50 Laser-Link™ 300 (9) Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A N/A 0.4 0.4 0.3 N/A 0.5 0.5 N/A

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 550 900 N/A N/A N/A 5000

Gigabit Ethernet Minimum Link Distances are based on "bandwidth"/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00003, Revision 6, 6.17.15 Specifications are subject to change without notice.

74

Fiber Optic Cable

Double-Jacket Single-Armor OSP Loose Tube (LE Series SADJ) Ordering Information NOMINAL DIAMETER AFL NO. LE006C5111S1 LE012C5111S1 LE018C5111S1 LE024C5111S1 LE030C5111S1 LE036C5111S1 LE048C5111S1 LE060C5111S1 LE072C6111S1 LE084C8111S1 LE096C8111S1 LE108CA111S1 LE120CA111S1 LE132CC111S1 LE144CC111S1

MAXIMUM TENSILE LOAD

NOMINAL WEIGHT

FIBER COUNT

NUMBER OF TUBES/FIBERS

INCHES

MM

LBS/1,000FT

6 12 18 24 30 36 48 60 72 84 96 108 120 132 144

1w/6 (4 fillers) 1w/12 (4 fillers) 1w/12,1w/6 (3 fillers) 2w/12 (3 fillers) 2w/12,1w/6 (2 fillers) 3w/12 (2 fillers) 4w/12 (1 filler) 5w/12 (no fillers) 6w/12 (no fillers) 7w/12 (1 filler) 8w/12 (no fillers) 9w/12 (1 filler) 10w/12 (no fillers) 11w/12 (1 filler) 12w/12 (no fillers)

0.59 0.59 0.59 0.59 0.59 0.59 0.59 0.62 0.62 0.69 0.69 0.76 0.76 0.83 0.83

15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.9 17.6 17.6 19.3 19.3 21.2 21.2

128 128 128 128 128 128 128 128 143 169 169 201 201 234 234

LBS (N)

KG/KM

SHORT TERM

190 190 190 190 190 190 190 190 212 252 252 299 299 348 348

600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670)

MINIMUM BEND RADIUS INCHES (CM)

LONG TERM

SHORT TERM

LONG TERM

180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800)

12.4 (32.0) 12.4 (32.0) 12.4 (32.0) 12.4 (32.0) 12.4 (32.0) 12.4 (32.0) 12.4 (32.0) 12.4 (32.0) 13.0 (33.0) 14.4 (36.4) 14.4 (36.4) 15.8 (40.2) 15.8 (40.2) 18.0 (46.0) 18.0 (46.0)

5.9 (15.0) 5.9 (15.0) 5.9 (15.0) 5.9 (15.0) 5.9 (15.0) 5.9 (15.0) 5.9 (15.0) 5.9 (15.0) 6.5 (16.4) 7.2 (18.2) 7.2 (18.2) 7.9 (20.1) 7.9 (20.1) 9.0 (22.9) 9.0 (22.9)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode K = SM Futureguide SR-15e Bend Insensitive

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00003, Revision 6, 6.17.15 Specifications are subject to change without notice.

75

Fiber Optic Cable

Armored Loose Tube Cable – Triple Jacket/Double Armor Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Armored Loose Tube Triple Jacket/Double Armor fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations, including direct buried. With fiber counts up to 144 and S-Z strand designs for easy mid-span access, AFL’ cables comply with EIA/TIA, REA/RUS PE-90 and GR-20. Industry standard designs combined with innovative technologies, such as a dry core product, yield a world class cable that will support today’s and tomorrow’s technological needs.

Temperature Range

Applications • Long Haul Networking • Building Interconnections (Campus LAN) • Trunking Lines Direct to Telecommunications Closet • Local Loop • Distance Learning • Distribution • Intrabuilding Backbones

PARAMETER Operating Storage Installation

VALUE -40ºC to +70ºC -40ºC to +75ºC -30ºC to +60ºC

Cable Components Outer Jacket Second Jacket Water Blocking Tape Outer Corrugated Steel Armor Central Strength Member Outer Strength Members (where applicable) Dry-Blocked Buffer Tube Containing up to 12 Fibers Ripcord (typical) Inner Corrugated Steel Armor Inner Jacket

Typical Lengths MAXIMUM LENGTHS* SINGLE-MODE FEET METERS 20,000 6,000 14,700 4,500 13,000 4,000 11,100 3,400

FIBER COUNT 6 - 72 84 - 96 108 - 120 132 - 144

FEET 20,000 14,700 13,000 11,100

MULTIMODE METERS 6,000 4,500 4,000 3,400

* Longer lengths may be available upon request.

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00043, Revision 2, 9.28.11 Specifications are subject to change without notice.

76

Fiber Optic Cable

Armored Loose Tube Cable – Triple Jacket/Double Armor Optical Information MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50 Laser-Link™ 300 (9) Single-mode

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 550 900 N/A N/A

Gigabit Ethernet Minimum Link Distances are based on "bandwidth"/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

Ordering Information NOMINAL DIAMETER AFL NO. LE006C5421S1 LE012C5421S1 LE018C5421S1 LE024C5421S1 LE030C5421S1 LE036C5421S1 LE048C5421S1 LE060C5421S1 LE072C6421S1 LE084C8421S1 LE096C8421S1 LE108CA421S1 LE120CA421S1 LE132CC421S1 LE144CC421S1

NOMINAL WEIGHT

MAXIMUM TENSILE LOAD

MINIMUM BEND RADIUS

LBS (N)

INCHES (CM)

FIBER COUNT

NUMBER OF TUBES/FIBERS

INCHES

MM

LBS/1,000FT

KG/KM

SHORT TERM

LONG TERM

SHORT TERM

LONG TERM

6 12 18 24 30 36 48 60 72 84 96 108 120 132 144

1w/6 (4 fillers) 1w/12 (4 fillers) 1w/12,1w/6 (3 fillers) 2w/12 (3 fillers) 2w/12,1w/6 (2 fillers) 3w/12 (2 fillers) 4w/12 (1 filler) 5w/12 (no fillers) 6w/12 (no fillers) 7w/12 (1 filler) 8w/12 (no fillers) 9w/12 (1 filler) 10w/12 (no fillers) 11w/12 (1 filler) 12w/12 (no fillers)

0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.81 0.88 0.88 0.94 0.94 1.02 1.02

19.7 19.7 19.7 19.7 19.7 19.7 19.7 19.7 20.6 22.3 22.3 24.0 24.0 25.9 25.9

243 243 243 243 243 243 243 243 262 302 302 346 346 392 392

362 362 362 362 362 362 362 362 390 450 450 515 515 585 585

600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670)

180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800)

15.6 (39.4) 15.6 (39.4) 15.6 (39.4) 15.6 (39.4) 15.6 (39.4) 15.6 (39.4) 15.6 (39.4) 15.6 (39.4) 16.2 (41.2) 16.6 (44.3) 16.6 (44.3) 18.8 (48.0) 18.8 (48.0) 20.4 (51.8) 20.4 (51.8)

7.8 (19.7) 7.8 (19.7) 7.8 (19.7) 7.8 (19.7) 7.8 (19.7) 7.8 (19.7) 7.8 (19.7) 7.8 (19.7) 8.1 (20.6) 8.8 (22.3) 8.8 (22.3) 9.4 (24.0) 9.4 (24.0) 10.2 (25.9) 10.2 (25.9)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode

www.AFLglobal.com or (800) 235-3423

© 2008, AFL, all rights reserved. PP-1-00043, Revision 2, 9.28.11 Specifications are subject to change without notice.

77

Fiber Optic Cable

Low Smoke Zero Halogen OFN-LS Listed Loose Tube Cable AFL’s Low Smoke Zero Halogen (LSZH) Loose Tube cable is designed for use in outdoor aerial and indoor duct appplications including subways and tunnels with requirements for limited smoke and zero halogen. Optical fibers are located within S-Z strandard buffer tubes, providing stable and reliable long-term performance. The cable is dryblocked (no messy gel flooding the core) to prevent axial flow of moisture and utilizes a flame-retardant, non-halogenated UV-resistant outer jacket.

Temperature Range Operating: -40ºC to +70ºC Storage:

-40ºC to +75ºC

AFL’s Low Smoke Zero Halogen (LSZH) loose tube cable group includes OFN-LS Listed as well as non-listed designs. The OFN-LS listed loose tube cable line (LL-Series) is specially engineered for applications that require UL/NEC compliant cables intended for inside-building applications and must meet minimum flame and smoke generation guideline.The Non-Listed cables are also constructed with LSZH materials and are intended for OSP installations where NFPA/NEC listing is not required. Cable Components

FRP central member water blocking layer strength member flame retardant LSZH jacket gel filled buffer tube

Installation: -20ºC to +60ºC

optical fibers rip cord

Typical Lengths MAXIMUM LENGTHS* SINGLE-MODE FEET METERS 39,370 12,000 32,800 10,000 31,100 9,500 22,900 7,000

FIBER COUNT 2 - 12 18 - 96 108 -120 132 - 144

FEET 20,200 26,200 26,200 26,200

MULTIMODE METERS 6,100 8,000 8,000 8,000

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link 300 (9) Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.2 1.2 N/A N/A 3.2 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A 5000

Gigabit Ethernet Minimum Link Distances are based on "bandwidth"/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2003, AFL, all rights reserved. PP-1-00011, Revision 3.5, 10.25.11 Specifications are subject to change without notice.

78

Fiber Optic Cable

Low Smoke Zero Halogen OFN-LS Listed Loose Tube Cable Ordering Information NOMINAL DIAMETER FIBER NUMBER OF AFL NO. COUNT TUBES/FIBERS NON-ARMORED, SINGLE JACKET, OFN-LS LISTED 6 1w/6 (4 fillers) LL006C5101N1 12 1w/12 (4 fillers) LL012C5101N1 24 2w/12 (3 fillers) LL024C5101N1 36 3w/12 (2 fillers) LL036C5101N1 48 4w/12 (1 filler) LL048C5101N1 72 6w/12 (no fillers) LL072C6101N1 96 8w/12 (no fillers) LL096C8101N1 144 12w/12 (no fillers) LL144CC101N1

NOMINAL WEIGHT

INCHES

MM

LBS/1,000 FT

KG/KM

0.47 0.47 0.47 0.47 0.47 0.510 0.571 0.720

11.9 11.9 11.9 11.9 11.9 12.8 14.5 18.3

92 92 91 91 90 92 118 185

137 137 136 136 134 137 175 275

MAXIMUM TENSILE LOAD LBS (N) SHORT TERM LONG TERM 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670)

180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800) 180 (800)

MINIMUM BEND RADIUS INCHES (CM) SHORT TERM LONG TERM 9.4 (24) 9.4 (24) 9.4 (24) 9.4 (24) 9.4 (24) 10.2 (26) 11.4 (29) 14.4 (37)

4.7 (12) 4.7 (12) 4.7 (12) 4.7 (12) 4.7 (12) 5.1 (13) 5.7 (15) 7.2 (19)

NOTES: 1. Diameter and weight subject to change without notice. 2. For other types of LSZH Cables: Double Jacket, Non-Armored; Single Jacket, Single Armor; Double Jacket, Single Armor and higher fiber counts in non-armored, please contact your AFL’ Representative.  Fiber Types-Replace asterisk () in AFL number with number corresponding to desired fiber type below

5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode Q = Non-zero dispersion-shifted single-mode K = SM Futureguide SR-15e Bend Insensitive

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight With Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL typically provides Loose Tube cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request. Larger reel sizes may be required to accomodate long cable lengths.

www.AFLglobal.com or (800) 235-3423

© 2003, AFL, all rights reserved. PP-1-00011, Revision 3.5, 10.25.11 Specifications are subject to change without notice.

79

Fiber Optic Cable

All-Dielectric Armored Rodent-Resistant OSP Loose Tube (LN Series) AFL’s All-dielectric Rodent-Resistant cable is designed specifically for environments that have an increased risk of rodent infestation and disturbance. The LN-series product line covers the range of fiber-counts of up to 576 fibers. The ultra-hard, non-metallic outer polymer shell reduces risk of transmission interruptions in vital OSP network interconnections. In addition, the cable line meets all applicable RUS, GR-20 and IEC and TIA related design and performance guidelines. Cable Components rodent-resistant, low-friction, outer jacket polyethylene inner jacket

Applications • Long Haul Networking • Building Interconnections (Campus LAN) • Steam-tunnel Substreet Drainage Networks • Local Loop • Airport (FAA-E-2761c, Type B) Temperature Range Operating:

-40ºC to +70ºC

Storage:

-40ºC to +75ºC

Installation: -30ºC to +70ºC

optical fibers FRP central member

ripcords water-blocking system gel-filled loose buffer tube

Typical Lengths MAXIMUM LENGTHS* SINGLE-MODE FEET METERS 22,900 7,000 22,900 7,000 22,900 7,000 22,600 6,900 17,000 5,200 15,000 4,600 10,800 3,300 6,500 2,000

FIBER COUNT 6 - 60 72 - 96 108 -120 132 - 144 146 - 216 218 - 288 290 - 432 434 - 576

MULTIMODE FEET 22,900 22,900 22,900 22,600 17,000 15,000 10,800 6,500

METERS 8,000 7,000 7,000 6,900 5,200 4,600 3,300 2,000

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link™ 300 (9) Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2009, AFL, all rights reserved. PP-1-00019, Revision 4, 7.17.14 Specifications are subject to change without notice.

80

Fiber Optic Cable

All-Dielectric Armored Rodent-Resistant OSP Loose Tube (LN Series) Ordering Information NUMBER OF TUBES/FIBERS 1w/6 (4 fillers)

NOMINAL DIAMETER INCHES MM 0.49 12.5

MAXIMUM TENSILN LOAD

MINIMUM BEND RADIUS

NOMINAL WEIGHT LBS (N) INCHES (CM) LBS/1,000FT KG/KM SHORT TERM LONG TERM SHORT TERM LONG TERM 56 84 600 (2670) 200 (890) 9.8 (25) 4.9 (13)

AFL NO. LN006C5101N1

FIBER COUNT 6

LN012C5101N1

12

1w/12 (4 fillers)

0.49

12.5

56

84

600 (2670)

200 (890)

9.8 (25)

4.9 (13)

LN018C5101N1 LN024C5101N1 LN030C5101N1

18 24 30

1w/12,1w/6 (3 fillers) 2w/12 (3 fillers) 2w/12,1w/6 (2 fillers)

0.49 0.49 0.49

12.5 12.5 12.5

56 56 56

84 84 84

600 (2670) 600 (2670) 600 (2670)

200 (890) 200 (890) 200 (890)

9.8 (25) 9.8 (25) 9.8 (25)

4.9 (13) 4.9 (13) 4.9 (13)

LN036C5101N1

36

3w/12 (2 fillers)

0.49

12.5

56

84

600 (2670)

200 (890)

9.8 (25)

4.9 (13)

LN048C5101N1 LN060C5101N1 LN072C6101N1 LN084C8101N1 LN096C8101N1 LN108CA101N1 LN120CA101N1 LN132CC101N1 LN144CC101N1 LN216CI301N1 LN288CO301N1 LN432IO301N1 LN576OO301N1

48 60 72 84 96 108 120 132 144 216 288 432 576

4w/12 (1 filler) 5w/12 (no fillers) 6w/12 (no fillers) 7w/12 (1 filler) 8w/12 (no fillers) 9w/12 (1 filler) 10w/12 (no fillers) 11w/12 (1 filler) 12w/12 (no fillers) 18w/12 (no fillers) 24w/12 (no fillers) 24w/18 (no fillers) 24w/24 (no fillers)

0.49 0.49 0.53 0.60 0.60 0.67 0.67 0.75 0.75 0.76 0.87 0.94 1.07

12.5 12.5 13.4 15.2 15.2 17.1 17.1 19.0 19.0 19.3 22.0 23.9 27.3

56 56 65 81 81 101 101 123 123 125 156 183 243

84 84 97 121 121 151 151 184 184 187 234 273 303

600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670)

200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890)

9.8 (25) 9.8 (25) 10.6 (27) 12.0 (31) 12.0 (31) 13.4 (34) 13.4 (34) 15.0 (38) 15.0 (38) 15.2 (39) 17.4 (44) 18.8 (48) 21.4 (55)

4.9 (13) 4.9 (13) 5.3 (14) 6.0 (16) 6.0 (16) 6.7 (17) 6.7 (17) 7.5 (19) 7.5 (19) 7.6 (20) 8.7 (22) 9.4 (24) 10.7 (28)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 L = 50/125 µm multimode Laser-Link™ 300 9 = Single-mode K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight With Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL typically provides Loose Tube cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request. Larger reel sizes may be required to accomodate long cable lengths.

www.AFLglobal.com or (800) 235-3423

© 2009, AFL, all rights reserved. PP-1-00019, Revision 4, 7.17.14 Specifications are subject to change without notice.

81

Fiber Optic Cable

Federal Aviation Administration (FAA) OSP Loose Tube (LG Series) The AFL family of FAA-compliant fiber optic loose tube cables is specifically designed for airport and related installations that must comply with meet U.S. Department of Transportation Federal Aviation Administration (FAA) requirements. AFL FAA-compliant loose tube cables incorporate a highly chemical resistant Polyamide jacketing system that is ideally suited for use in pathways exposed to hydrocarbon liquids, de-icing fluids, cleaning solvents, jet fuels and other outside-plant networking applications that are typical at these facilities. AFL FAA-compliant cables are available with a variety of fiber-types including; Single-mode, multimode, bend-insensitive and hybrid (SM and MM) optical fibers. Applications

Cable Components Polyamide outer jacket

• Runway communication, lighting and control • Control tower - remote location networking • Inter-terminal network connections • Pathways exposed to corrosive solutions • Direct burial in suitable trenched pathways

PE inner jacket polyester tape optical fibers FRP central member rip cord

Standards

water-blocking system

• FAA-E-2761, Type B • GR-20-CORE • TIA/EIA-568-B

gel-filled loose buffer tube

Typical Lengths MAXIMUM LENGTHS*

Temperature Range Operating: -40ºC to +70ºC Storage:

-40ºC to +75ºC

Installation: -10ºC to +70ºC

FIBER COUNT

FEET 22,900 22,900 22,900 22,900

6 - 60 72 - 96 108 -120 132 - 144

SINGLE-MODE METERS 7,000 7,000 7,000 7,000

FEET 22,900 22,900 22,900 22,900

MULTIMODE METERS 7,000 7,000 7,000 7,000

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link™ 300 (9) Single-mode (Q) Non-zero Dispersion-shifted Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (DB/KM) 850 NM 1300 NM 1310 NM 1550 NM 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A N/A 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ•KM) 850 NM 1300 NM 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850 NM 1300 NM 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A N/A N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

www.AFLglobal.com or (800) 235-3423

© 2009, AFL, all rights reserved. PP-1-00047, Revision 3, 7.17.14 Specifications are subject to change without notice.

82

Fiber Optic Cable

Federal Aviation Administration (FAA) OSP Loose Tube (LG Series) Ordering Information NOMINAL DIAMETER AFL NO. LG006C5111N1 LG012C5111N1

FIBER COUNT 6 12

NUMBER OF TUBES/FIBERS 1w/6 (4 fillers) 1w/12 (4 fillers)

INCHES 0.46 0.46

MM 11.8 11.8

LG018C5111N1 LG024C5111N1 LG030C5111N1 LG036C5111N1

18 24 30 36

1w/12,1w/6 (3 fillers) 2w/12 (3 fillers) 2w/12,1w/6 (2 fillers) 3w/12 (2 fillers)

0.46 0.46 0.46 0.46

LG048C5111N1 LG060C5111N1 LG072C6111N1 LG084C8111N1 LG096C8111N1 LG108CA111N1 LG120CA111N1 LG132CC111N1 LG144CC111N1

48 60 72 84 96 108 120 132 144

4w/12 (1 filler) 5w/12 (no fillers) 6w/12 (no fillers) 7w/12 (1 filler) 8w/12 (no fillers) 9w/12 (1 filler) l0w/12 (no fillers) 11w/12 (1 filler) 12w/12 (no fillers)

0.46 0.46 0.50 0.57 0.57 0.64 0.64 0.72 0.72

MAXIMUM TENSILE LOAD NOMINAL WEIGHT

LBS (N)

MINIMUM BEND RADIUS INCHES (CM) SHORT TERM LONG TERM 9.2 (23.6) 4.6 (11.8) 9.2 (23.6) 4.6 (11.8)

92 92

137 137

SHORT TERM 600 (2670) 600 (2670)

11.8 11.8 11.8 11.8

96 96 96 96

143 143 143 143

600 (2670) 600 (2670) 600 (2670) 600 (2670)

200 (890) 200 (890) 200 (890) 200 (890)

9.2 (23.6) 9.2 (23.6) 9.2 (23.6) 9.2 (23.6)

4.6 (11.8) 4.6 (11.8) 4.6 (11.8) 4.6 (11.8)

11.8 11.8 12.8 14.6 14.6 16.3 16.3 18.3 18.3

96 96 110 129 129 149 149 204 204

143 143 163 191 191 221 221 303 303

600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670) 600 (2670)

200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890) 200 (890)

9.2 (23.6) 9.2 (23.6) 10.0 (25.6) 11.4 (29.2) 11.4 (29.2) 12.8 (32.6) 12.8 (32.6) 14.4 (36.6) 14.4 (36.6)

4.6 (11.8) 4.6 (11.8) 5.0 (12.8) 5.7 (14.6) 5.7 (14.6) 6.4 (16.3) 6.4 (16.3) 7.2 (18.3) 7.2 (18.3)

LBS/1,000FT KG/KM

LONG TERM 200 (890) 200 (890)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in AFL number with number corresponding to desired fiber type below. 5 = 50/125 µm multimode GIGA-Link™ 600 7 = 50/125 µm multimode GIGA-Link™ 2000 6 = 62.5/125 µm multimode GIGA-Link™ 300 8 = 62.5/125 µm multimode GIGA-Link™ 1000 9 = Single-mode L = 50/125 µm multimode Laser-Link™ 300 K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

Reel Information ITEM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight With Lagging

REEL A INCHES CM 42 106.7 36 91.4 32 81.6 23 58.7 3 7.9 180 lbs 82 kg

REEL B INCHES CM 58 147.3 38 96.5 32 81.3 28 71.1 3 7.9 420 lbs 191 kg

REEL C INCHES CM 66 167.6 42 106.7 36 91.4 36 91.4 3 7.9 685 lbs 311 kg

REEL D INCHES CM 72 182.8 42 106.7 36 91.4 36 91.4 3 7.9 710 lbs 320 kg

REEL E INCHES CM 84 213.4 40 101.6 34 86.4 35 88.9 3 7.9 950 lbs 431 kg

AFL typically provides Loose Tube cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available upon request. Larger reel sizes may be required to accomodate long cable lengths.

www.AFLglobal.com or (800) 235-3423

© 2009, AFL, all rights reserved. PP-1-00047, Revision 3, 7.17.14 Specifications are subject to change without notice.

83

Fiber Optic Cable

Non-Armored Single Jacket Dry Loose Tube Cable Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Non-Armored Dry Loose Tube fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations. Our dry buffer tube cables feature fiber counts up to 288, compliance with EIA/TIA and REA/RUS PE-90, and are S-Z stranded for easy mid-span access. The dry buffer tube and core permit rapid cable preparation and termination. Water blocking materials are easily removed. Industry standard designs combined with innovative technologies, such as a dry core and dry tube product, yield a world class cable that will support today’s and tomorrow’s technological needs. Applications

Cable Components

outer jacket

• Building Interconnections (Campus LAN) • Trunking Lines Direct to Telecommunications Closet • Local Loop • Distance Learning • Distribution • Intrabuilding Backbones

water blocking system strength elements (where applicable) FRP central member optical fiber rip cord dry-blocked buffer tube

Temperature Range

Typical Lengths

Operating: -40ºC to + 70ºC

MAXIMUM LENGTHS*

Storage:

FIBER COUNT

-40ºC to + 75ºC

Installation: -30ºC to + 60ºC

SINGLE-MODE FEET METERS 39,370 12,000 32,800 10,000 31,100 9,500 22,900 7,000 22,900 7,000

6 - 60 72 - 96 108 -120 132 - 144 146 - 288

MULTIMODE FEET METERS 26,200 8,000 26,200 8,000 26,200 8,000 22,900 7,000 — —

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link™ 300 (9) Single-mode (Q) Non-zero Dispersion-shifted Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (dB/km) 850nm 1300nm 1310nm 1550nm 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A N/A 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHz•km) 850nm 1300nm 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850nm 1300nm 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A N/A N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

© 2007, AFL, all rights reserved. PP-1-00014, Revision 1, 6.17.15 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 84

Fiber Optic Cable

Non-Armored Single Jacket Dry Loose Tube Cable Ordering Information MAXIMUM TENSILE LOAD

NOMINAL DIAMETER

NOMINAL WEIGHT

SHORT TERM

LBS. (N)

FIBER COUNT

NUMBER OF TUBES/FIBERS

INCHES (MM)

LBS/1,000FT (KG/KM)

LE006C5101N1D

6

1w/6 (4 fillers)

0.45 (11.4)

53.8 (80.2)

600 (2700)

LE012C5101N1D

12

1w/12 (4 fillers)

0.45 (11.4)

53.8 (80.2)

LE018C5101N1D

18

1w/12, 1w/6 (3 fillers)

0.45 (11.4)

LE024C5101N1D

24

2w/12 (3 fillers)

0.45 (11.4)

LE030C5101N1D

30

2w/12, 1w/6 (2 fillers)

LE036C5101N1D

36

3w/12 (2 fillers)

LE048C5101N1D

48

LE060C5101N1D

60

LE072C6101N1D

72

6w/12 (No fillers)

LE084C8101N1D

84

7w/12 (1 filler)

LE096C8101N1D

96

8w/12 (No fillers)

LE108CA101N1D

108

9w/12 (1 filler)

LE120CA101N1D

120

LE132CC101N1D LE144CC101N1D LE216CI301N1D

AFL NO.

MINIMUM BEND RADIUS INCHES (CM)

LONG TERM

SHORT TERM

LONG TERM

200 (890)

9.0 (22.8)

4.5 (11.4)

600 (2700)

200 (890)

9.0 (22.8)

4.5 (11.4)

53.8 (80.2)

600 (2700)

200 (890)

9.0 (22.8)

4.5 (11.4)

53.8 (80.2)

600 (2700)

200 (890)

9.0 (22.8)

4.5 (11.4)

0.45 (11.4)

53.8 (80.2)

600 (2700)

200 (890)

9.0 (22.8)

4.5 (11.4)

0.45 (11.4)

53.8 (80.2)

600 (2700)

200 (890)

9.0 (22.8)

4.5 (11.4)

4w/12 (1 filler)

0.45 (11.4)

53.8 (80.2)

600 (2700)

200 (890)

9.0 (22.8)

4.5 (11.4)

5w/12 (No fillers)

0.45 (11.4)

53.8 (80.2)

600 (2700)

200 (890)

9.0 (22.8)

4.5 (11.4)

0.49 (12.4)

62.6 (93.4)

600 (2700)

200 (890)

9.8 (24.8)

4.9 (12.4)

0.56 (14.2)

80.9 (120.7)

600 (2700)

200 (890)

11.2 (28.4)

5.6 (14.2)

0.56 (14.2)

80.9 (120.7)

600 (2700)

200 (890)

11.2 (28.4)

5.6 (14.2)

0.63 (15.9)

101.5 (151.4)

600 (2700)

200 (890)

12.6 (31.8)

6.3 (15.9)

10w/12 (No fillers)

0.63 (15.9)

101.5 (151.4)

600 (2700)

200 (890)

12.6 (31.8)

6.3 (15.9)

132

11w/12 (1 filler)

0.70 (17.8)

127.5 (190.1)

600 (2700)

200 (890)

14.0 (35.6)

7.0 (17.8)

144

12w/12 (No fillers)

0.70 (17.8)

127.5 (190.1)

600 (2700)

200 (890)

14.0 (35.6)

7.0 (17.8)

216

18w/12 (No fillers)

0.71 (18.0)

116.1 (173.1)

600 (2700)

200 (890)

14.2 (36.0)

7.1 (18.0)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in part number with number corresponding to desired fiber type below. 5 = 50/125µm multimode GIGA-Link™ 600 7 = 50/125µm multimode GIGA-Link™ 2000 6 = 62.5/125µm multimode GIGA-Link™ 300 8 = 62.5/125µm multimode GIGA-Link™ 1000 9 = Single-mode L = 50/125µm multimode Laser-Link™ 300 K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

© 2007, AFL, all rights reserved. PP-1-00014, Revision 1, 6.17.15 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 85

Fiber Optic Cable

Armored Single Jacket/Single Armor Dry Loose Tube Cable Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Armored Dry Loose Tube Single Jacket/Single Armor fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations, including direct buried. Our dry buffer tube cables feature fiber counts up to 144, compliance with EIA/TIA and REA/RUS PE-90, and are S-Z stranded for easy mid-span access. The dry buffer tube and core permit rapid cable preparation and termination. Water blocking materials are easily removed. Industry standard designs combined with innovative technologies, such as a dry core and dry tube product, yield a world class cable that will support today’s and tomorrow’s technological needs. Applications

Cable Components

• Building Interconnections (Campus LAN) • Trunking Lines Direct to Telecommunications Closet • Local Loop • Distance Learning • Distribution • Intrabuilding Backbones Temperature Range Operating: -40ºC to + 70ºC Storage :

-40ºC to + 75ºC

Installation: -30ºC to + 60ºC

Typical Lengths MAXIMUM LENGTHS* SINGLE-MODE FEET METERS 39,370 12,000 32,800 10,000 31,100 9,500 22,900 7,000

FIBER COUNT 6 - 60 72 - 96 108 -120 132 - 144

FEET 26,200 26,200 26,200 22,900

MULTIMODE METERS 8,000 8,000 8,000 7,000

* Longer lengths may be available upon request.

Optical Information

FIBER TYPE (6) 62.5/125 GIGA-Link™ 300 (8) 62.5/125 GIGA-Link™ 1000 (5) 50/125 GIGA-Link™ 600 (7) 50/125 GIGA-Link™ 2000 (L) 50/125 Laser-Link™ 300 (9) Single-mode (Q) Non-zero Dispersion-shifted Single-mode (K) SM Futureguide SR-15e Bend Insensitive

MAXIMUM ATTENUATION (dB/km) 850nm 1300nm 1310nm 1550nm 3.5 1.2 N/A N/A 3.5 1.2 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A 2.9 0.9 N/A N/A N/A N/A 0.35 0.25 N/A N/A N/A 0.25 N/A N/A 0.35 0.25

OVERFILL LAUNCH MIN. BANDWIDTH (MHz•km) 850nm 1300nm 200 600 350 600 500 500 500 800 1500 500 N/A N/A N/A N/A N/A N/A

GIGABIT ETHERNET MIN. LINK DISTANCE (METERS) 850nm 1300nm 300 550 500 1000 600 600 750 2000 900 550 N/A 5000 N/A N/A N/A 5000

Gigabit Ethernet Minimum Link Distances are based on “bandwidth”/modal dispersion constraints. Actual link distances may be constrained by attenuation, depending on specific loss budget.

© 2007, AFL, all rights reserved. PP-1-00042, Revision 1, 6.17.15 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 86

Fiber Optic Cable

Armored Single Jacket/Single Armor Dry Loose Tube Cable Ordering Information MAXIMUM TENSILE LOAD

NOMINAL DIAMETER

NOMINAL WEIGHT

SHORT TERM

LBS. (N)

FIBER COUNT

NUMBER OF TUBES/FIBERS

INCHES (MM)

LBS/1,000FT (KG/ KM)

LE006C5201S1D

6

1w/6 (4 fillers)

0.52 (13.2)

94 (140)

600 (2700)

LE012C5201S1D

12

1w/12 (4 fillers)

0.52 (13.2)

94 (140)

LE018C5201S1D

18

1w/12, 1w/6 (3 fillers)

0.52 (13.2)

LE024C5201S1D

24

2w/12 (3 fillers)

0.52 (13.2)

LE030C5201S1D

30

2w/12, 1w/6 (2 fillers)

LE036C5201S1D

36

3w/12 (2 fillers)

LE048C5201S1D

48

LE060C5201S1D

60

LE072C6201S1D

72

LE084C8201S1D

84

LE096C8201S1D LE108CA201S1D LE120CA201S1D

120

LE132CC201S1D LE144CC201S1D

AFL NO.

MINIMUM BEND RADIUS INCHES (CM)

LONG TERM

SHORT TERM

LONG TERM

180 (800)

10.4 (26.4)

5.2 (13.2)

600 (2700)

180 (800)

10.4 (26.4)

5.2 (13.2)

94 (140)

600 (2700)

180 (800)

10.4 (26.4)

5.2 (13.2)

94 (140)

600 (2700)

180 (800)

10.4 (26.4)

5.2 (13.2)

0.52 (13.2)

94 (140)

600 (2700)

180 (800)

10.4 (26.4)

5.2 (13.2)

0.52 (13.2)

94 (140)

600 (2700)

180 (800)

10.4 (26.4)

5.2 (13.2)

4w/12 (1 filler)

0.52 (13.2)

94 (140))

600 (2700)

180 (800)

10.4 (26.4)

5.2 (13.2)

5w/12 (No fillers)

0.52 (13.2)

94 (140)

600 (2700)

180 (800)

10.4 (26.4)

5.2 (13.2)

6w/12 (No fillers)

0.55 (14.0)

108 (161)

600 (2700)

180 (800)

11.0 (28.0)

5.5 (14.0)

7w/12 (1 filler)

0.62 (15.8)

130 (193)

600 (2700)

180 (800)

12.4 (31.6)

6.2 (15.8)

96

8w/12 (No fillers)

0.62 (15.8)

130 (193)

600 (2700)

180 (800)

12.4 (31.6)

6.2 (15.8)

108

9w/12 (1 filler)

0.70 (17.7)

159 (237)

600 (2700)

180 (800)

14.0 (35.4)

7.0 (17.7)

10w/12 (No fillers)

0.70 (17.7)

159 (237)

600 (2700)

180 (800)

14.0 (35.4)

7.0 (17.7)

132

11w/12 (1 filler)

0.77 (19.6)

192 (285)

600 (2700)

180 (800)

15.4 (39.2)

7.7 (19.6)

144

12w/12 (No fillers)

0.77 (19.6)

192 (285)

600 (2700)

180 (800)

15.4 (39.2)

7.7 (19.6)

Note: Diameter and weight subject to change without notice

 Fiber Types – Replace asterisk () in part number with number corresponding to desired fiber type below. 5 = 50/125µm multimode GIGA-Link™ 600 7 = 50/125µm multimode GIGA-Link™ 2000 6 = 62.5/125µm multimode GIGA-Link™ 300 8 = 62.5/125µm multimode GIGA-Link™ 1000 9 = Single-mode L = 50/125µm multimode Laser-Link™ 300 K = SM Futureguide SR-15e Bend Insensitive Q = Non-zero dispersion-shifted single-mode

© 2007, AFL, all rights reserved. PP-1-00042, Revision 1, 6.17.15 Specifications are subject to change without notice.

www.AFLglobal.com or (800) 235-3423 87

FI

E

TIC R OP CABL BE

Fiber Optic Cable

IEC MicroCore® Fiber Optic Cable AFL MicroCore® is an advanced Blown Fiber Optic Cable system for underground duct cables. The MicroCore product line is a complete solution with designs suitable for many applications and needs from backbone networks to FTTx. Whether the need is for high Fiber density or small cable diameter, the MicroCore range has the solution. Designs are always based on minimal cable and duct diameters for cost effective installation and materials. MicroCore cables are jetted through a network of microducts using compressed air. Conduit systems can be laid and microducts and cable can be blown in as and when required, giving installers the flexibility of deploying fiber only when needed and reducing initial investment costs. Making provisions for future installations also means that only the very latest fiber optic technology is used and therefore scaled to changing market demands. Conventional duct 288 Fiber 53.6% Fill d

The MicroCore system can be used for overriding existing networks and conduits, which reduces network disruption and expensive excavation costs and permits during installation. MicroCore cable is lightweight and flexible made with a specially designed low friction jacket to enable greater jetting lengths to reduce time and cost. Features

Subduct 360 Fiber 52.9% fill

• Scalable deployment • Rapid cost effective installation • Fiber counts up to 144 • Range of cable designs and sizes to suit a variety of duct size • No EMI or earth bonding limitations • Fiber arranged in buffer tubes some designs suitable for 12-Fiber management

• Suitable for microducts supplied by all manufacturers • Installation speeds of up to 120 m/min. and over 2.5 km lengths at a time • Robust for handling in the field • High level bend capacity • Low friction jacket design • Easy access and breakout of Fibers

Cable Components Multi-tube Design (4-8 tubes) low friction outer jacket optical fibers in buffer tube strength element rip cord

www.AFLglobal.com or (800) 235-3423

© 2002, AFL, all rights reserved. PP-1-00059, Revision 4, 6.10.14 Specifications are subject to change without notice.

88

FI

E

TIC R OP CABL BE

Fiber Optic Cable

IEC MicroCore® Fiber Optic Cable Mechanical Data AFL NO. (n=number of fibers) MCnLA1-1.2 MCnnLA1-1.6 MCnnDA4-4.7 MCnnDA4-6.1 MCnnDA4-7.5 MCnnDA6-6.1 MCnnDA6-7.9 MCnnDA6-9.2 MCnnDA8-6.6 MCnnDA8-7.6 MCnnDA8-9.0 NOTES:

NO. OF TUBES/ OUTSIDE UNIT WEIGHT MAX. FIBERS DIAMETER kg/km FIBERS PER TUBE mm (inches) (lbs/1000ft) 4 1 1.2 ± 0.15 (0.05) 1.2 ± 1 (0.8) 12 1 1.6 ± 0.15 (0.06) 2.3 ± 1 (1.54) 24 4/6 4.7 ± 0.2 (0.18) 18 ± 1 (12.06) 48 4/12 6.1 ± 0.1 (0.24) 28 ± 1 (18.76) 96 4/24 7.5 ± 0.1 (0.29) 43 ± 1 (28.81) 72 6/12 6.1 ± 0.1 (0.24) 33±1 (22.11) 144 6/24 7.9 ± 0.1 (0.31) 55 ± 1 (36.85) 144 6/24 9.2 ± 0.1 (0.36) 73 ± 1 (48.91) 96 8/12 6.6 ± 0.1 (0.25) 43 ± 1 (28.81) 96 8/12 7.6 ± 0.1 (0.29) 56 ± 1 (37.52) 192 8/24 9.0 ± 0.1 (0.35) 65 ± 0.1 (43.55)

STORAGE OPERATING TEMP. TEMP. °C °C -25 to +65 -25 to +65 -25 to +65 -25 to +65 -20 to +65 -20 to +65 -30 to +85 -30 to +85 -20 to +70 -20 to +70 -40 to +85 -40 to +85 -30 to +70 -30 to +70 -40 to +85 -40 to +85 -40 to +70 -40 to +70 -40 to +85 -40 to +85 -40 to +85 -40 to +70

MAX. OPTICAL WORKING MIN. BEND LOAD RADIUS CABLE kN (lbs) mm (inches) MARKING 0.01 (02) 35 (1.37) – 0.03 (06) 32 (1.25) – 0.10 (02) 150 (5.9) yes 0.30 (67) 130 (5.1) yes 0.28 (62) 150 (5.9) yes 0.30 (67) 130 (5.1) yes 0.30 (67) 135 (5.3) yes 1.2 (269) 190 (7.5) yes 0.20 (44) 130 (5.1) yes 0.60 (135) 150 (5.9) yes 0.60 (135) 180 (7.0) yes

SUITABLE SUB-DUCT SIZE ID mm (inches) 2.5 (0.9) 3.5 (0.13) 8 (0.31) 8 (0.31) 10 (0.39) 8 (0.31) 10 (0.39) 12 (0.47) 8 (0.31) 10 (0.39) 10 (0.39)

1. All cable designs are available with all fiber types including; low bend, low water peak, MM, SMF. 2. All cable designs are available with tube or jacket colours to EIA 598 or customer specification 3. All cable designs are available with fiber colours to EIA 598 or customer specification 4. Cable markings are available to customer specification on highlighted designs

Fiber Specifications FIBER TYPE Single-mode Non Zero Dispersion Shifted Low Bend Multimode 50/125 Multimode 62.5/125

850 NM — — — 2.5 3.0

INCOMING ATTENUATION (DB/KM) 1310 NM 1383 NM 0.35 0.35 — — 0.35 0.35 — — — —

1300 NM — — — 0.8 0.7

www.AFLglobal.com or (800) 235-3423

1550 NM 0.24 0.25 0.20 — —

1625 NM 0.20 0.25 0.23 — —

© 2002, AFL, all rights reserved. PP-1-00059, Revision 4, 6.10.14 Specifications are subject to change without notice.

89

D UCTS

M IC R O C O

OS

IC

R

E

RO

Fiber Optic Cable P C ABLE &

M

OSP MicroCore® Telcordia GR-20 Micro-Technology Air-Blown OSP Loose Tube AFL OSP MicroCore® cable series is designed for outside plant installation in microduct conduit systems. The unique, high-fiber density geometry yields a cable construction that can safely accommodate 12 up to 432 fibers and can be blown into microducts ranging in inside diameters from 10 mm to 16 mm. For example, with a 7-way 12.7 mm x 10 mm (conduit with seven microducts) in place, the system designer has the flexibility to install from 12 to 144 fibers per microduct. With this approach, only the number of fibers required for initial networking requirements need to be installed. Then as future network upgrades and expansions are required, the spare microducts can be jetted with addition OSP MicroCore cables without having to add additional pathway space and the associated installation labor cost. Applications • Designed for long -haul and middle-mile • Campus inter-building backbone distribution • Low-cost fiber upgrade migration strategies

Features • GR-20 compliant water-blocked cable core and buffer tubes • Colored binder threads for easily identifiable optical fiber bundles • 300-lb load rating • Aramid-strengthened cable core • OD compatible with 10 mm to 16 mm inside diameter microducts • 12 up to 432 fibers

Mechanical Data NOMINAL MIN. DUCT MAXIMUM TENSILE LOAD MINIMUM BEND RADIUS NOMINAL WEIGHT DIAMETER I.D. LBS (KG) INCHES (CM) IN. MM IN. MM LBS/1,000 FT KG/KM INSTALLATION OPERATION INSTALLATION OPERATION LM012xC6101NS 12 12/1 (5 fillers) 0.299 7.6 0.394 10 31 46 300 (136) 99 (45) 7 (16) 5 (13) LM024xC6101NS 24 12/2 (4 fillers) 0.299 7.6 0.394 10 31 46 300 (136) 99 (45) 7 (16) 5 (13) LM048xC6101NS 48 12/4 (2 fillers) 0.299 7.6 0.394 10 33 49 300 (136) 99 (45) 7 (16) 5 (13) LM072xC6101NS 72 12/6 (no fillers) 0.299 7.6 0.394 10 34 51 300 (136) 99 (45) 7 (16) 5 (13) LM096xO6101NS 96 24/2, 12/4 0.311 7.9 0.394 10 34 51 300 (136) 99 (45) 7 (16) 5 (13) LM144xO6101NS 144 24/6 (no fillers) 0.311 7.9 0.394 10 36 53 300 (136) 99 (45) 7 (16) 5 (13) LM288xCO301NS 288 24/12 (no fillers) 0.496 12.6 0.630 18 88 131 330 (150) 100 (45) 10 (26) 6 (15) LM432xIO301NS 432 24/18 (no fillers) 0.496 12.6 0.630 18 90 134 330 (150) 100 (45) 10 (26) 6 (15) * See Optical Fiber Specifications table for fiber type identifier. The “Fiber Identifier" replaces the “x" in the AFL No. LM-SERIES AFL NO.

FIBER FIBERS/ TUBE COUNT

www.AFLglobal.com or (800) 235-3423

© 2013, AFL, all rights reserved. PP-1-00027, Revision 7, 10.23.14 Specifications are subject to change without notice.

90

D UCTS

M IC R O C O

OS

IC

R

E

RO

Fiber Optic Cable P C ABLE &

M

OSP MicroCore® Telcordia GR-20 Micro-Technology Air-Blown OSP Loose Tube Specifications

FIBER TYPE

AFL NO. FIBER IDENTIFIER

ISO DESIGNATION

OVERFILL LAUNCH MIN. BANDWIDTH (MHZ-KM)

MAXIMUM ATTENUATION (DB/KM)

850 NM 1300 NM 1550 NM 850 NM 1300 NM 62.5/125 6 OM1 3.5 1.2 N/A 200 600 50/125 5 OM2 3.5 1.2 N/A 500 500 50/125 L OM3 3.5 1.2 N/A 1500 500 50/125 C OM4 3.5 1.2 N/A 3500 550 SM 9 OS2 N/A 0.5 0.5 N/A N/A 0.5 N/A N/A SM BIF K N/A N/A 0.5 Tested to meet or exceed TIA/EIA-568-C, Telcordia GR-20, ICEA, IEC and IEEE Standards.

EMBC (MHZ-M)

N/A N/A 2000 4700 N/A N/A

GIGABIT 10 GIGABIT ETHERNET MIN. ETHERNET MIN. LINK DISTANCE LINK DISTANCE (METERS) (METERS) 850 NM 1300 NM 850 NM 1300 NM 300 550 32 N/A 600 600 82 N/A 1000 550 300 N/A 1040 550 550 N/A N/A 5000 N/A 10000 N/A 5000 N/A 10000

Environmental PARAMETER Operating Temperature Storage Temperature Installation Temperature

VALUE -30°C to 70°C -30°C to 70°C -10°C to 40°C

Standard P-U Length Reel Type Reel Size

6,000 m (20,000 ft) Wood 58 x 32 x 28 in.

www.AFLglobal.com or (800) 235-3423

© 2013, AFL, all rights reserved. PP-1-00027, Revision 7, 10.23.14 Specifications are subject to change without notice.

91

IDEAA®

(Integrated Distribution Enabling Access Apparatus)

IDEAA Exterior Distribution Cabinet The IDEAA Exterior Distribution Cabinet (EDC) provides a convenient modular approach to centralized fiber distribution. All sizes of the EDC utilize the IDEAA splitter module to enable versatility across the platform. The EDC utilizes innovative jumper routing to enable efficient fiber management utilizing equal length pigtails for the entire cabinet.

288 Fiber (Closed)

Features •• Modular distribution platform allows for incremental deployment costs and immediate cost savings •• Small size is unobtrusive in residential deployments •• Enhanced fiber management provides simplified routing and termination •• Dual-door entry allows easy access to distribution and fiber management fields •• Flexible pad and pole mounting options allow for deployment in convenient locations •• Expandable feeder cables allow for point-to-point distribution (cross-connect) Specifications THROUGH PORTS

HEIGHT

WIDTH

DEPTH

Up to 288 Fiber 432 Fiber 576 and 864 Fiber

38" 46" 48"

20" 20" 42.5"

20" 20" 20"

SPLITTER CAPACITY 9 14-15 28

INPUT/PASS 24 24 (48 available) 144

Ordering Information 864 Fiber (Open)

DESCRIPTION PAD MOUNT WITH SKIRT AND 100 FOOT TAILS IDEAA Exterior Distribution Cabinet - 72 Pad, 1 x 144 Fiber (72 Fibers Terminated) Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube) IDEAA Exterior Distribution Cabinet - 144 Pad, 1 x 144 Fiber Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube) IDEAA Exterior Distribution Cabinet - 216 Pad, 1 x 216 Fiber Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube) IDEAA Exterior Distribution Cabinet - 288 Pad, 1 x 288 Fiber Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube) IDEAA Exterior Distribution Cabinet - 432 Pad, 2 x 216 Fiber Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube) IDEAA Exterior Distribution Cabinet - 864 Pad, 2 x 432 Fiber Distribution Cable (Ribbon), 2 x 72 Fiber Input Cable (Ribbon) POLE MOUNT WITH BRACKET AND 100 FOOT TAILS IDEAA Exterior Distribution Cabinet - 144 Pole, 1 x 144 Fiber Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube) IDEAA Exterior Distribution Cabinet - 288 Pole, 1 x 288 Fiber Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube) IDEAA Exterior Distribution Cabinet - 432 Pole, 2 x 216 Fiber Distribution Cable (Loose Tube), 1 x 24 Fiber Input Cable (Loose Tube)

AFL NO. EA000307 EA000304 EA000305 EA000301 EA000321 EA000590

EA000314 EA000302 EA000322

© 2011, AFL, all rights reserved. PP-2-00061, Revision 6, 5.14.15 Specifications are subject to change without notice.

92

IDEAA® Integrated Distribution Enabling Access Apparatus AFL’s Integrated Distribution Enabling Access Apparatus (IDEAA) product family revolutionizes the way passive optical splitters are deployed in the network. Utilizing a small modular design and leveraging planar waveguide technology to yield an ultra low polarization dependent loss, low insertion loss, and high port uniformity, the IDEAA product possesses the flexibility to be used in a wide variety of applications. The IDEAA module provides a lower cost and more versatile alternative to preexisting PON architecture arrangements. Rather than being confined to a traditional “splitterin-cabinet” design, the IDEAA product family allows service providers to employ PON architecture across all areas of the network. The IDEAA module’s unique design enables customers to utilize a revolutionary stand-alone mounting capability. In addition to conforming to a number of different applications, each IDEAA module can be mounted as an independent distribution point. This unit can be neatly secured to a wall or even placed on an existing rack or cabinet. IDEAA SC and LC Modules

Applications •• Direct Wall Mount •• Interior Wall Mount Enclosure / Pedestal •• Exterior Wall Mount Enclosure •• Exterior Distribution Enclosure / Pedestal •• Exterior Distribution Cabinet •• Splice Closure – Sealed •• Rack Mount Bracket Features •• SC and LC Module configurations can accommodate up to a 32 fiber distribution •• MPO Module configuration can accommodate up to a 96 fiber distribution •• Modular design allows for highly flexible and scalable deployments •• Durable hardened plastic exterior provides a rugged encasement •• Single and multi-package modules available •• Single-mode fiber compliant to IEC 60793 and ITU-T G.652.D

The IDEAA SC and LC modules come equipped with an internal PLC device which is factory terminated and tested. An integrated hinge provides easy access to the SC or LC adapter interface while reducing space when mounted. The SC and LC modules use APC connectors to meet the strict back reflection requirements of the latest PON architectures. A wide variety of PLC splitter configurations are available. A dual 1x16 module is available with SC APC outputs and LC APC inputs. Two SC APC to LC APC jumpers are included to connect to the EDC SC APC input ports. IDEAA MPO Module The IDEAA MPO module is also outfitted with PLC technology that is factory terminated and tested. The use of MPO technology allows for mass deployment of PON distribution fibers in Multiple-Dwelling Unit (MDU) applications. Up to three (3) modules can be attached to each other to allow for a maximum deployment of 288 distribution fibers. A wide variety of PLC splitter configurations are available as well. Direct Wall Mount Capability The IDEAA product can easily mount to an interior wall without needing any additional enclosures. Simply use the integrated hinge plate to install the module directly to a wall. The module contains port identification for each output fiber. Specifications PARAMETER

Ordering Information

VALUE 1 X 4 1 X 8 1 X 16 1 X 32 Wavelength Range (nm) 1280 - 1650 9.8 12.9 16.6 Typical Insertion Loss (dB) 6.7 Max Insertion Loss (dB) 7.4 10.5 14 17.5 Max IL Uniformity (dB) 1 1 1.5 2 Return Loss (dB) ≥55 Directivity (dB) ≥55 Max PDL (dB) 0.3

DESCRIPTION IDEAA MODULE, SC, 1X32 IDEAA MODULE, SC, LC INPUT, DUAL 1x16 IDEAA MODULE, SC, 1X16 IDEAA MODULE, SC, 1X8 IDEAA MODULE, SC, 1X4 IDEAA MODULE, LC, 2X32 IDEAA MODULE, MTP, 3X96

AFL NO. EA000102 EA000583 EA000103 EA000104 EA000105 EA000547 EA000101

© 2011, AFL, all rights reserved. PP-2-00061, Revision 6, 5.14.15 Specifications are subject to change without notice.

93

IDEAA®

(Integrated Distribution Enabling Access Apparatus)

LL-400sx Optical Splicing/Distribution Enclosure The LightLink (LL) 400sx Fiber Optic Splicing and Distribution Enclosure provides for organizing, splicing, and interconnecting fibers in FTTx, broadband, distribution and building entrance applications. Each LL-400sx enclosure features a scratch resistant powder coated aluminum base and a fully gasketed cover. A unique self-sizing grommet design allows for express and preterminated cable installation. The LL-400sx is a butt-style enclosure equipped with four independent cable entry/exit grommets, used for outdoor pedestal or indoor building entrance and riser splicing applications. The unit supports a maximum storage and splicing capacity of up to 192 single or 576 mass-fused fibers. The LL-400sx can also mount up to two LGX118® adapter plates (splicing capacity limited to 144 single fusion and 432 mass fusion splices when adapter plates are installed). Features • Independent cable strain relief system • Cable entry/exit grommet seals • Removable Hinged Front Cover • Fiber routing system • Splice tray support system • 192 single fusion splices • 576 mass fusion splices • Grounding hardware kit included • 1 1x32 IDEAA Module with LGX Mount Bracket

Ordering Information

Specifications PARAMETER Material

VALUE Chassis – aluminum Electrostatically applied, Coatings powder coat Color Antique white 23.9 x 9.5 x 5.0 Dimensions (H x W x D) in. (cm) (58.4 x 24.13 x 12.7) Weight lbs (kg) 5.0 (2.3)

Applications • OSP Splicing • MDU Splicing • FTTx Distribution

DESCRIPTION LL-400sx LL-4848 Mass Fusion Splice Tray LL-2448 Universal Splice Tray LL-2448-48S Single Fusion Splice Tray LL-2400 Single Fusion Splice Tray Channel MAH1010 Pedestal Channel MAH1212 Pedestal IDEAA® Module LGX Mount Bracket IDEAA Pigtail Kit IDEAA SC/APC 1x32 Splitter Module IDEAA SC/APC 1x16 Splitter Module IDEAA SC/APC 1x8 Splitter Module IDEAA SC/APC 1x4 Splitter Module

AFL NO. EA000370 911437-00-02 911289-00-02 FA000045 91710-06 FM000776 FM000655 EA000061 EA000166 EA000102 EA000103 EA000104 EA000105

IDEAA® Rack Mount Bracket The IDEAA RMB allows attachment of one (1) IDEAA module to easily mount to industry standard LGX® 118 fiber management rack panels. Simple push-pull pins allow the module to be easily installed and removed. Capacity

Features •• Metal plate with push/pull pins

IDEAA MODULE # of 118 Positions 1x32 SC 1x16 SC 1x8 and 1x4 SC 3x96 MPO

1RU PANEL 3 N/A N/A 3 3

2RU PANEL 6 N/A 3 6 6

3RU PANEL 9 3 3 9 9

4RU PANEL 12 4 6 12 12

•• Powder coated black •• LGX compatible

Ordering Information DESCRIPTION Rack-mount Panel LGX®118 Bracket for SC/APC IDEAA Module Rack-mount Panel LGX®118 Bracket for MPO IDEAA Module

AFL NO. EA000061 EA000062

LGX® is a registered trademark of Furukawa Electric North America, Inc. © 2011, AFL, all rights reserved. PP-2-00061, Revision 6, 5.14.15 Specifications are subject to change without notice.

94

IDEAA®

(Integrated Distribution Enabling Access Apparatus)

IDEAA® Splice Closure—Sealed The IDEAA SCS is designed to mount either in buried or aerial applications. The splice closure comes equipped to install one (1) IDEAA module along with a tray to splice all input and output fiber cables. The splice closure is designed to handle multiple fiber cables. Specifications

Features •• Less than 20" overall length; ideal for small hand-holes •• Installation and re-entry using common hand tools •• Fully sealed to protect fiber and splices •• Fully kitted with all parts necessary for installation

PARAMETER Splice Capacity (Max.) – single Number of Splice Trays (Max.) – single Cable Entrance Configuration Cable Ports Cable Sizes (O.D.) Dimensions (L x D) – inches (cm) Weight - lbs. (kg)

VALUE 36 1 Butt 5 Ports (14 cables total using flat-drop grommets) Express Side – 2 (0.4"–1.0") Drop Side – 12 (0.31" flat-drop or 0.25" round) 19.8" x 10.0" (50.3 x 25.4) 12 (5.44)

Ordering Information DESCRIPTION IDEAA SPLICE CLOSURE IDEAA Splice Closure Pigtail Kit

AFL NO. EA000076 EA000168

© 2011, AFL, all rights reserved. PP-2-00061, Revision 6, 5.14.15 Specifications are subject to change without notice.

95

LightGuard® Sealed Fiber Optic Splice Closures AFL LightGuard Sealed Fiber Optic Splice Closures are designed to simplify splice management and maintenance. Intuitive engineering design reduces the installation time and complexity associated with fiber splicing in the field. No heat, adhesives, drills or powered equipment for installation or re-entry are required, just simply use a common 216 can wrench to access and install cable. LightGuard closures are durable, easy-to-install and will increase productivity, reduce labor expenses, and last the life of your plant. Features • Supports stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations • Fully sealed to protect fiber and splices ensuring longevity • Fully kitted with all parts to install cables • Designed and tested to Telcordia® GR-771 requirements • Rural Utilities Service (RUS) Listed

Specifications DESCRIPTION Splice Capacity (Max.) Single, Mass, Mechanical Number of Splice Trays (Max.) Single, Mass, Mechanical Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D.)

MODEL LG-350-U-0 2 384, 1152, 108

LG-55-U-0 24, n/a, n/a

LG-150-U-0 48, 144, 24

LG-250-U-0 1 96, 288, 36

1, n/a, n/a

4, 3, n/a

4, 2, 3

12, 8, 8

In-line / Butt 2

Butt 5

Butt 5

Butt 5

2 @ 0.60" (splice) 2 @ 0.77" (ground / bond)

5 @ 0.62"

5 @ 0.62"

3 @ 0.80" 2 @ 1.00"

Testing - Cable Retention (100 lbs) - Water Resistance (waterhead) - Impact Resistance (0-40 °C) - Chemical Resistance - Cable Flexing Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

Passed 20 ft. Passed Passed Passed 14.00 x 4.00 (35.60 x 10.16) 3.0 (1.36)

Passed Passed 20 ft. 20 ft. Passed Passed Passed Passed Passed Passed 18.25 x 8.75 19.00 x 8.75 (46.36 x 22.23) (48.26 x 22.23) 10.5 (4.76) 11.5 (5.23)

Passed 20 ft. Passed Passed Passed 28.00 x 10.00 (71.12 x 25.40) 14 (6.35)

350-AC 144, 288, 36

LG-350XL-U-0 864, 2592, 288

4, 3

9, 9, n/a

Butt Butt 2 (Express Grommets) 5 (7 using dual port 3 (4-Drop Grommets) grommet Express sides) 2 @ 1.0" 3 @ 1.25" 12 @ 0.312" Flat or 2 @ 1.35" 0.250" Round Passed 20 ft. Passed Passed Passed 20 x 10 13 (5.89)

Passed 20 ft. Passed Passed Passed 31.00 x 12.00 (78.74 x 30.48) 25 (11.34)

NOTES: 1. For the LG-250-U-0; 36 mechanical splices only using the LL-2448 splice tray. 2. For the LG-350-U-0; 108 mechanical splices only using the LL-2448 splice tray.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00064, Revision 6, 10.8.12 Specifications are subject to change without notice.

83

LightGuard® Peel and Seal Grommet Systems for Sealed Fiber Optic Closures AFL’s cable sealing grommet technology for the LightGuard (LG) Sealed Fiber Optic Closures improves sealing technology utilitizing MULTICENTRIC® Grommets that do away with time consuming tasks such as installing washers and messy sealing tapes for cable entry. MULTICENTRIC® Grommets are designed to accept a wide range of cable diameters, eliminating the need to stock a variety of diameter-specific grommet kits. Expandable to support various cable diameters

Conversion kits for old LG-100, LG-200, and LG-300 closures allows for “Peel and Seal" grommet technology to be used without changing out the existing closure. Features

Ease of installation (no tapes, washers, or glue)

• All Peel and Seal Grommet Systems support loose tube, core tube, dielectric and armored cable designs • Installation and re-entry using common hand tools • Accepts a wide range of cable diameters • Fast and easy to install • Fits existing AFL LightGuard sealed closures • Fully sealed to protect fiber and splices ensuring longevity • Full conversion kits and dual cable entry port kits • Designed and tested to Telcordia® GR-771 & RUS 515 closure requirements

Single

Dual

Quad

Ordering information Multiple layers of sealing protection

SEALED CLOSURE FULL CONVERSION KITS (SINGLE AXIS CABLE ENTRY) DESCRIPTION 3 Port Drop Grommet (LG-150/250) Dual Express Grommets for LG-350 Quad Express Grommets for LG-350 Single Cable Grommet Kit, Drop Port 4 Port Drop Grommet (LG-350 / LG-350-AC) LG-350 Express Single Cable Grommet Kit LG-350 Drop Single Cable Grommet Kit

AFL NO. FC000655 FC000337 FC000421 FC000628 FC000422 FC000726 FC000727

MULTICENTRIC is a registered trademark of the Mar-Don Corporation. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00001, Revision 6, 10.8.12 Specifications are subject to change without notice.

84

LightGuard® 55 Sealed Fiber Optic Splice Closure Designed with versatility in mind, the LightGuard (LG) 55 sealed closure from AFL offers a variety of solutions including repair and distribution splicing, grounding for Fiber-inthe-Loop applications, and for use as an isolation gap with armored cables. This closure accepts stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations and can be utilized in a butt or in-line configuration. The LG-55 closure incorporates a unique cable clamp design sealing the cable, allowing both of the cover halves to be removed without disturbing the contents. In addition, AFL’s Peel & Seal Grommet System™ is incorporated to ensure a tight fit on various cable diameters, fully sealing the closure and protecting the fiber while eliminating cumbersome tape and washers – making installation fast and easy.

Specifications

Features • Accommodates cables to 0.77" O.D. for splicing and grounding / bonding • Incorporates the Peel & Seal Grommet System, fully sealing the closure • Includes removable, integral central splicing module and individual cable retention clamps • Requires only a common can wrench for installation

Inline Repair Closure (IRC) for repair of flat or round drop cables

PARAMETER Splice Capacity (Max.) – Single, Mass, Mechanical Number of Splice Trays (Max.) – Single, Mass, Mechanical Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D.) Dimensions – (L x D) in. (cm) Weight – lbs. (kg)

VALUE 24, n/a, n/a 1, n/a, n/a In-line / Butt 2 (3 using dual cable entry port kit) 2 @ 0.60" (for in-line splice configuration) 2 @ 0.77" (for in-line ground / bond configuration) 2 @ 0.45" (for butt splice configuration) 14 x 4 (34.30 x 10.16) 3.0 (1.36)

Ordering Information DESCRIPTION LG-55 Sealed Fiber Optic Splice Closure – 24 fusion splice capable and includes (2) cable kits for sealing / retention, (2) Cable Grounding Kits, (1) Dual Cable Entry Port Kit and a grounding terminal. Splice tray not included. LG-55 In-line Repair Closure LG-55 with Stainless Steel Hardware for Harsh Environments LG-55 Splice Tray – Stores 24 single fusion splices and includes base, cover, (3) eight-position splice holders and tie-wraps. Maximum of (1) tray in the LG-55. Dual Cable Entry Port Kit – Allows two cables to enter closure from each cable port. Includes one dual port cable grommet to increase the closure to four ports. Cable Grounding Kit – Includes harness and hose clamp (one kit required per cable entry) Cable Grounding Harness Kit – Includes (4) 8" long ground harnesses constructed of #6 AWG conductor.

MODEL NO. LG-55-U-0

AFL NO. FC000034-PS

LG-55-IRC LG-55-U-SS LL-2425

FC000793-PS FC000711 FC000247

Dual Cable Entry Port Kit

FC000337

CGH-1

FC000003

CGH-4

FC000024

© 2002, AFL, all rights reserved. PP-2-00003, Revision 6, 10.8.12 Specifications are subject to change without notice.

85

LightGuard® 55-SC Sealed Fiber Optic Splice Closure AFL’s LightGuard (LG) 55-SC sealed closure retains all the features of the LG-55, but includes a unique patching system that utilizes pre-terminated SC fiber assemblies or field installable connectors such as the FAST™ SC. An innovative solution that can be used to facilitate a link between traffic control cabinets and entrance cables, the LG-55-SC closure allows for rapid restoration and minimal damage to a fiber optic cable should an impact disable the cabinet. A breakable tie wrap secures the pre-connectorized cable to one side of the closure (traffic control cabinet), while the main entrance cable is secured with a more rugged cable clamp, allowing the system to separate during a damaging impact. Features • Durable cover assembly that provides protection for all internal components and acts as an interface / anchor to the cable clamps • Unique cable clamp seal to anchor the cable to the cover assembly • Movable sheath retention bracket keeps cable bends at a minimum • Accommodates up to four SC/UPC connectors • Utilizes AFL’s Peel & Seal Grommet System™, ensuring a tight fit on various cable diameters while eliminating cumbersome tape and washers • Requires only a common can wrench for installation Specifications PARAMETER Maximum Cable Diameter Minimum Cable Diameter Maximum Cable Entry Overall Dimensions

VALUE 0.65" 0.30" 2 ports (one each end) 14" Length x 4" Diameter

Ordering Information MODEL NO. LG-55-SC Dual Cable Entry Port Kit – Allows two cables to enter closure from each cable port. Includes one dual port cable grommet to increase the closure to four ports. Cable Grounding Kit – Includes harness and hose clamp (one kit required per cable entry). Cable Grounding Harness Kit – Includes (4) 8" long ground harnesses constructed of #6 AWG conductor.

AFL NO. FC000481-PS FC000337 FC000003 FC000024

© 2002, AFL, all rights reserved. PP-2-00018, Revision 6, 10.8.12 Specifications are subject to change without notice.

86

LightGuard® 150 Sealed Fiber Optic Splice Closure The LightGuard (LG) 150 is a sealed dome closure designed for small count fiber splicing (< 48 single or 192 mass) in a butt configuration. Utilized in aerial or underground environments where a sealed closure is required, the LG-150 is ideal for express or ring applications and requires only a common can wrench for installation. Specifications Features • Supports stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations • Installation and re-entry requires only a common can wrench • Fully sealed to protect fiber and splices ensuring longevity • F ully kitted with all parts to install five cables • Designed and tested to Telcordia® GR-771 requirements • Rural  Utilities Service (RUS) Listed

PARAMETER Splice Capacity (Max.) – Single, Mass, Mechanical Number of Splice Trays (Max.) – Single, Mass, Mechanical Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. - Min. O.D.) Dimensions – (L x D) in. (cm) Weight – lbs. (kg)

VALUE 48, 192, n/a 4, 3, n/a Butt 5 5 (0.62" - 0.30") 18.25 x 8.75 (46.36 x 22.23) 10.5 (4.76)

Ordering Information DESCRIPTION LG-150 Sealed Fiber Optic Splice Closure – 48 Single or 192 mass fusion capable, includes (5) cable kits for sealing / retention and a grounding terminal. Cable Grounding Kits, hanger brackets and splice trays not included. LL-2450 Splice Tray – Stores (12) single fusion splices, includes base, cover, (2) six position single splice holders and tie-wraps. Maximum of (4) splice trays in the LG-150. LL-4850 Splice Tray – Stores (8) mass fusion splices, includes base, cover, (2) four position ribbon splice holders and tie-wraps. Maximum of (4) splice trays in the LG-150. LL-1248 Splice Tray – Stores (12) single fusion splices or (4) mass fusion splices, includes base, cover, (2) six position single splice holders, (1) four position ribbon splice holder and tie-wraps. Maximum of (4) splice trays in the LG-150. 3-Flat Drop Grommet Kit – For use with standard flat drop cable Cable Grounding Kit – Includes harness and hose clamp. One kit needed per cable entry. For use with LG-150/250/350. Cable Grounding Kit (pack of 5) – Includes harness and hose clamp. For use with LG-150/250/350. Universal Aerial Offset Strand Hanger Kit – For use with LG-150/250/350. Extended Offset Strand Hanger Kit – For use with LG-150/250/350. Pole or Wall Mount Bracket – For use with LG-150/250/350. OPGW Cable Bracket Kit for use when installing Sealed Closures (LG-150 / LG-250 / LG-350) to OPGW Cable. See details in Accessory section on page 13. 1X6 Fiber Router Kit O-Ring Replacement Kit – For use with LG-150/250. LLAS-200-12SC Terminal Adapter. Used with LG-150 and LG-250. See details in Accessory section on page 14.

MODEL NO. LG-150-U-0

AFL NO. FC000001-PS

LL-2450

91957-00

LL-4850

91958-00

LL-1248

911221-00-00

Flat Drop Grommet Kit CGH-1

FC000655 FC000003

CGH-5

FC000040

Universal Hanger

FC000006

Extended Offset Hanger

FC000208

PWK OPGW Bracket

FC000592 FC000683

Router O-Ring Replacement LLAS-200-12SC

FC000070 FC000004 FC000068

* See Accessory Specifications. See Splice Tray Specifications. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00029, Revision 6, 10.8.12 Specifications are subject to change without notice.

87

LightGuard® 250 Sealed Fiber Optic Splice Closure The LightGuard (LG) 250 is a sealed dome closure designed for medium count fiber splicing (< 96 single or 288 mass) in a butt configuration. Utilized in aerial or underground environments where a sealed closure is required, the LG-250 is ideal for express or ring applications and requires only a common can wrench for installation. Specifications Features • Supports stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations • Installation and re-entry requires only a common can wrench • Fully sealed to protect fiber and splices ensuring longevity • Fully kitted with all parts to install five cables • Designed and tested to Telcordia® GR-771 requirements • Rural  Utilities Service (RUS) Listed

* NOTE: When using LL-2448-48S capacity increases to 144 single splices. Capacity is cable OD driven. * See Accessory Specifications. See Splice Tray Specifications.

PARAMETER Splice Capacity (Max.) – Single, Mass, Mechanical Number of Splice Trays (Max.) – Single, Mass, Mechanical Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. - Min. O.D.) Dimensions – (L x D) in. (cm) Weight – lbs. (kg)

VALUE 96, 288, 48 4, 2, 4 Butt 5 5 (0.62" - 0.30") 19 x 8.75 (48.26 x 22.23) 11.5 (5.23)

Ordering Information DESCRIPTION LG-250 Sealed Fiber Optic Splice Closure – 96 Single or 288 mass fusion capable, includes (5) cable kits for sealing / retention and a grounding terminal. Cable Grounding Kits, hanger brackets and splice trays not included. LL-2400 Splice Tray – Stores (24) single fusion splices, includes base, cover, (1) twenty-four position single splice holder and tie-wraps. Maximum of (4) trays in the LG-250. LL-2448 Splice Tray – Stores (24) single fusion or (4) mass fusion splices, includes base, cover, (1) twenty-four position single splice holder, (1) four position ribbon splice holder and tie-wraps. Maximum of (3) trays in the LG-250.

MODEL NO. LG-250-U-0

AFL NO. FC000002-PS

LL-2400

91710-06

LL-2448

911289-00-02

LL-4800 Splice Tray – Stores (4) mass fusion splices, includes base, cover, (1) four position ribbon splice holder and tie-wraps. Maximum of (10) trays in the LG-300XL.

LL-4800

91711-07

LL-4848 Splice Tray – Stores (12) mass fusion splices, includes base, cover, (1) twelve position ribbon splice holder and tie-wraps. Maximum of (1) tray in the LG-250. Single Fusion Splice Tray for 48 Single Fused Fiber* 3-Flat Drop Grommet Kit – For use with standard flat drop cable OPGW Cable Bracket Kit for use only when installing closure on OPGW cable. 1X6 Fiber Router Kit Cable Grounding Kit – Includes harness and hose clamp. One kit needed per cable entry. For use with LG-150/250/350. Cable Grounding Kit (pack of 5) – Includes harness and hose clamp. For use with LG-150/250/350. O-Ring Replacement Kit – For use with LG-150/250 Universal Aerial Offset Strand Hanger Kit – For use with LG-150/250/350 Extended Offset Strand Hanger Kit – For use with LG-150/250/350. Pole or Wall Mount Bracket – For use with LG-150/250/350 Terminal Adapter – Houses 12 SC bulkhead adapters, for use with LG-150/250

LL-4848

911437-00-02

LL-2448-48S Flat Drop Grommet Kit OPGW Bracket

FA000045 FC000655 FC000683

Router CGH-1

FC000070 FC000003

CGH-5

FC000040

O-Ring Replacement Universal Hanger

FC000004 FC000006

Extended Offset Hanger

FC000208

PWK LLAS-200-12SC

FC000592 FC000068

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00078, Revision 6, 10.8.12 Specifications are subject to change without notice.

88

MuxGuard® 250 Sealed Fiber Optic Splice Closure The MuxGuard 250 is a sealed dome closure designed with pre-installed Thin Film Filter (TFF) Compact Series CWDMs or DWDMs that allow for MUXing and DEMUXing within the same closure. The closure is also equipped with pre-installed splice trays that keep the bandwidth signals separated from each other, thus preventing accidental signal loss during maintenance activities. All fibers from the WDMs are routed to the appropriate splice tray through color-coded transition tubes. The closures are available with 4-channel or 8-channel units. As with other LG Series Sealed Closures, these closures require no tools for re-entry, and each closure may be padlocked as necessary. Specifications

Features • Factory pre-installed devices • Factory pre-installed transition tubes with fibers routed to appropriately designated bandwidth splice trays • Color-coded transition tubes • Installation and re-entry requires only a common can wrench • Fully sealed to protect fiber, splices and devices • Fully kitted with all parts to install five cables • Designed and tested to Telcordia® GR-771 requirements • Rural  Utilities Service (RUS) Listed

PARAMETER Splice Capacity (Max.) – Single Number of Splice Trays (Max.) – Single Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. - Min. O.D.) Dimensions – (L x D) in. (cm) Weight – lbs. (kg)

VALUE 96 4 Butt 5 5 (0.70" - 0.30") 19 x 8.75 (48.26 x 22.23) 11.5 (5.23)

Ordering Information DESCRIPTION MuxGuard 250 Sealed Closure

MODEL NO. LG-250-CWDM-8-301 (1471-1611) LG-250-CWDM-8-301-121-500 LL-2448 Splice Tray – Stores (24) single fusion or (4) LL-2448 mass fusion splices, includes base, cover, (1) twentyfour position single splice holder, (1) four position ribbon splice holder and tie-wraps. Maximum of (3) trays in the LG-250. 1X6 Fiber Router Kit Router O-Ring Replacement Kit – For use with LG-150/250 O-Ring Replacement Universal Aerial Offset Strand Hanger Kit – For use Universal Hanger with LG-150/250/350 Extended Offset Strand Hanger Kit – For use with Extended Offset Hanger LG-150/250/350. Pole or Wall Mount Bracket – For use with PWK LG-150/250/350 Terminal Adapter – Houses 12 SC bulkhead adapt- LLAS-200-12SC ers, for use with LG-150/250

AFL NO. FC000800 FC000803 911289-00-02

FC000070 FC000004 FC000006 FC000208 FC000592 FC000068

* See Accessory Specifications. See Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00085, Revision 6, 10.8.12 Specifications are subject to change without notice.

89

Thin Film Filter (TFF) Compact Series CWDM AFL’s TFF compact series CWDM modules deliver reliable performance and flexibility in every network application – from cellular backhaul and metro Ethernet to access and security. With its reduced package size, this new outside plant CWDM module has added flexibility, making deployment options more convenient.

CWDM 4-Channel Mini Module

CWDM 8-Channel Mini Module

This CWDM series is based on proven Thin Film Filter technology, offering low insertion loss and high thermal stability over the entire outside plant operating temperature range. Numerous configurations are available to meet unique needs and support new or existing network architectures. Typical options include a variety of configurations (mux, demux, and balanced), upgrade ports (1310, C-Band, and others), test / monitoring ports and multiple termination options. Features

Applications

• Low insertion loss • Compact size • High thermal stability • Telcordia GR-1221-CORE compliant • RoHS 6/6 compliant

• CWDM systems • Metro ethernet / access networks • Cellular backhaul networks

Specifications

PARAMETER Operating Wavelength Channel Spacing Center Wavelength Pass Band 1310 Upgrade Port Pass Band 1310 Upgrade Port Insertion Loss CWDM Channel Insertion Loss CWDM Adjacent Channel Isolation CWDM Non-adjacent Channel Isolation PDL PMD Return Loss Directivity Maximum Input Power Package Size Operating Temperature

UNIT nm nm nm nm nm dB dB dB dB dB ps dB dB mW Mm °C

WITHOUT UPGRADE PORT WITH 1310 NM UPGRADE PORT 4 Channel 8 Channel 4 Channel 8 Channel 1471~1611 20 Customer specified ± 6.5 — 1270~1350 — 1.0 ≤ 2.0 ≤ 2.5 ≤ 2.6 ≤ 3.4 ≥ 30 ≥ 45 ≤ 0.2 ≤ 0.1

≤ 0.25 ≥ 45 ≥ 50 ≤ 300

60 (l) x 35 (w) x 6 (d)

70 (l) x 45 (w) x 9 (d) -40 ~ +85

* Actual optical specifications will vary based on product configuration 1. Higher and lower channel counts available

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2010, AFL, all rights reserved. PP-2-00048, Revision 1, 10.30.12 Specifications are subject to change without notice.

103

LightGuard® 350 Sealed Fiber Optic Splice Closure The LightGuard (LG) 350 is a sealed dome closure designed for large count fiber splicing (< 384 single or 1152 mass) in a butt configuration. Utilized in aerial or underground environments where a sealed closure is required, the LG-350 is ideal for express, ring or long haul applications and requires only a common can wrench for installation. Features • Supports stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations • Installation and re-entry requires only a common can wrench • Fully sealed to protect fiber and splices ensuring longevity • Fully kitted with all parts to install five cables • Designed and tested to Telcordia® GR-771 requirements • Rural Utilities Service (RUS) Listed Specifications PARAMETER

VALUE

Splice Capacity (Max.) – Single, Mass, Mechanical Number of Splice Trays (Max.) – Single, Mass, Mechanical Cable Entrance Configuration Cable Ports / Cable Sizes (Max. O.D. - Min. O.D.)

480, 1152, 108 12, 8, 8 Butt 5 / 7 (using dual cable configuration for Express ports) 2 Express (1.00" - 0.40") 3 Drop (0.80" - 0.30") 28.0" x 10.0" (71.12 x 25.40) / 14 (6.35)

Dimensions – (L x D) in. (cm) / Weight - lbs. (kg)

LG-350 with LLAS-300-24SC

continued on next page

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00103, Revision 6, 10.8.12 Specifications are subject to change without notice.

90

LightGuard® 350 Sealed Fiber Optic Splice Closure (cont.) Ordering Information DESCRIPTION LG-350 Sealed Fiber Optic Splice Closure – 384 single fusion or 1152 mass fusion capable, includes (5) cable kits for sealing / retention (single and dual calbe configurations for express ports) and a grounding terminal. Cable Grounding Kits, hanger brackets and splice trays not included. LL-2400 Splice Tray – Stores (24) single fusion splices, includes base, cover, (1) twenty-four position single splice holder and tiewraps. Maximum of (12) trays in the LG-350. LL-2448 Splice Tray – Stores (24) single fusion or (4) mass fusion splices, includes base, cover, (1) twenty-four position single splice holder, (1) four position ribbon splice holder and tie-wraps. Maximum of (8) trays in the LG-350. LL-4800 Splice Tray – Stores (4) mass fusion splices, includes base, cover, (1) four position ribbon splice holder and tie-wraps. Maximum of (10) trays in the LG-300XL. LL-4848 Splice Tray – Stores (12) mass fusion splices, includes base, cover, (1) twelve position ribbon splice holder and tie-wraps. Maximum of (6) trays in the LG-350. LL-4896 Splice Tray – Stores (96) single fusion splices or (24) mass fusion splices, includes base, cover, (16) six position single splice holders, (6) four position ribbon splice holders and tie-wraps. Maximum of (5) trays in the LG-350. LL-2448-48S Splice Tray – Stores (24) single fusion splices. May be installed in the LG-250, LG-350, LG-350-XL, LG-410, LG-500, LG-600 Splice Closures, the LL-400B and LL-400S Distribution Enclosures and the LL-2400 Pedestal. LL-7644 Universal Splice Tray – Stores (60) single fusion splices or (288) mass fusion splices or a combination of both in an easy-to-use, deep splice tray. For use with the LG-350 and LG-350XL Closures. LL-7060 Splice Tray – Stores (60) single fusion splices in an easy-to-use, deep splice tray. For use with the LG-350 and LG-350XL Closures. LL-7144 Splice Tray – Stores (288) mass fusion splices in an easy-to-use, deep splice tray. For use with the LG-350 and LG-350XL Closures. 4-Flat Drop Grommet Kit – For use with standard flat drop cable and round cable up to 0.256" O.D. Cable Grounding Kit – Includes harness and hose clamp. One kit needed per cable entry. For use with LG-150/250/350. Cable Grounding Kit (pack of 5) – Includes harness and hose clamp. For use with LG-150/250/350. O-Ring Replacement Kit – For use with LG-350. Universal Aerial Strand Hanger Kit – For use with LG-150/250/350. Extended Offset Strand Hanger Kit – For use with LG-150/250/350.

MODEL NO. LG-350-U-0

AFL NO. FC000009-PS

LL-2400

91710-06

LL-2448

911289-00-02

LL-4800

91711-07

LL-4848

911437-00-02

LL-4896

911676-00-02

LL-2448-48S

FA000045

LL-7644

FA000044

LL-7060

FA000042

LL-7144

FA000043

Flat Drop Grommet Kit CGH-1 CGH-5 O-Ring LG-300 Universal Hanger Extended Offset Hanger

Pole or Wall Mount Bracket – For use with LG-150/250/350. OPGW Cable Bracket Kit for use only when installing closure on OPGW cable.

PWK PGW Bracket

FC000422 FC000003 FC000040 912231-00-00 FC000006 FC000208 FC000592 FC000683

1X6 Fiber Router Kit

Router

FC000070

Terminal Adapter – Houses 24 SC bulkhead adapters, for use with LG-350 Terminal Adapter – Empty plate

LLAS-300-24SC LLAS-350-96LC

FC000069 FC000736

* See Accessory Specifications. See Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00103, Revision 6, 10.8.12 Specifications are subject to change without notice.

91

LightGuard® 350-AC Drop Access Sealed Fiber Optic Splice Closure AFL’s LightGuard (LG) 350-AC sealed dome closure is intended for utilization in aerial or underground environments where a sealed closure is required and space may be limited. Designed for "drop access" applications providing access for up to 12 drops, this closure is also versatile enough to be used for splicing up to 144 single splices in a butt configuration. Ideal for Fiber-to-the-Home installations in small hand-hole applications, the LG-350-AC requires only a common can wrench for installation. Specifications PARAMETER Splice Capacity (Max.) – single, mass Number of Splice Trays (Max.) – single, mass Cable Entrance Configuration Cable Ports Cable Sizes (O.D.)

VALUE 144, 432 4, 3 Butt 5 Ports (14 cables total using flat-drop grommets) Express Side – 2 (0.4"–1.0") Drop Side – 12 (0.31" flat-drop or 0.25" round) 19.8" x 10.0" (50.3 x 25.4) 12 (5.44)

Dimensions (L x D) – inches (cm) Weight - lbs. (kg)

Ordering Information

Features • Less than 20" overall length; ideal for small hand-holes • Supports standard loose tube, outside plant ribbon and Uniflex® fiber optic cables in both dielectric and armored configurations • Installation and re-entry requires only a common can wrench • Fully sealed to protect fiber and splices, ensuring longevity • Fully kitted with all parts to install two cables and up to 12 drops • Designed  and tested to Telcordia® GR-771 requirements • Rural  Utilities Service (RUS) listed

DESCRIPTION Dome Closure, 144 single fusion capable (with additional trays), 5 cable entry kits for sealing and retention (2-single port for express and 3-quad port for drop), ground terminal, (1) LL-4808L splice tray. No cable grounding or hanger brackets are included Single Fusion Splice Tray - Stores up to 36 single fused fibers (maximum of 4 trays in LG-350-AC) Mass Fusion Splice Tray - Stores up to 144 mass fused fibers (maximum of 4 trays in LG-350-AC) Single Cable Branch Grommet Kit Cable Grounding Kit - For LG-150/250/350 5 Cable Grounding Kits - For LG-150/250/350 O-Ring Replacement Kit for the LG-350 Universal Aerial Strand Hanger kit - For LG-150/250/350

MODEL NO. LG-350-AC

AFL NO. FC000412

LL-4808L

FA000021

LL-4808R

FA000020

Branch Grommet Kit CGH-1 CGH-5 O-Ring LG-300 Universal Hanger

FC000628 FC000003 FC000040 912231-00-00 FC000006

Extended Offset Strand Hanger Kit - For LG-150/250/350 Pole or Wall MT Bracket for use with LG150/250/350 OPGW Cable Bracket Kit

Extended Offset Hanger FC000208 PWK FC000592 OPGW Bracket FC000683

* Unit available for Mass/Ribbon utilization. Consult customer service for details. * See Accessory Specifications. See Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00118, Revision 6, 10.8.12 Specifications are subject to change without notice.

92

LightGuard® 350XL Sealed Fiber Optic Splice Closure The LightGuard (LG) 350XL is a sealed dome closure designed for large count fiber splicing (up to 864 single or 2592 mass) in a butt configuration. Utilized in aerial or underground environments where a sealed closure is required, the LG-350XL requires only a common can wrench for installation. Specifications PARAMETER

VALUE

Splice Capacity (Max.) – Single, Mass, Mechanical Number of Splice Trays (Max.) – Single, Mass, Mechanical Cable Entrance Configuration Cable Ports / Cable Sizes (Max. O.D.)

864, 2592, 288 9, 9, 9 Butt 5 ports / 7 with Dual Express Grommet Express Port Drop Port Single 1.18" - 0.40" Single 1.08" - 0.30" Double 0.56" - 0.44" 31.0" x 12.0 (78.74 x 30.48) / 25 lbs. (11.3 kg)

Dimensions - (L x D) in. (cm) / Weight - lbs. (kg)

Features • Can accommodate up to 7 cables • Supports stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations • Flanged O-Ring and T-bolt V-band for increased protection • Oversized basket allows multiple configurations of slack storage • Requires only a common can wrench for installation

Ordering Information DESCRIPTION

MODEL NO.

AFL NO.

LG-350XL Sealed Fiber Optic Splice Closure – 864 single fusion or 2592 mass fusion capable, includes (5) cable kits for sealing / retention (single and dual cable configurations) and a grounding terminal. Cable Grounding Kits, hanger brackets and splice trays not included LL-4896 Splice Tray – Stores (96) single fusion splices or (24) 288 mass fusion splices, includes base, cover, (16) six position single splice holders, (6) four position ribbon splice holders and tie-wraps. Maximum of (9) trays in the LG-350XL LL-2400 Splice Tray – Stores (24) single fusion splices, includes base, cover, (1) twenty-four position single splice holder and tie-wraps. Maximum of (12) trays in the LG-350XL. LL-2448 Splice Tray – Stores (24) single fusion or (4) mass fusion splices, includes base, cover, (1) twenty-four position single splice holder, (1) four position ribbon splice holder and tie-wraps. Maximum of (8) trays in the LG-350XL. LL-4800 Splice Tray – Stores (4) mass fusion splices, includes base, cover, (1) four position ribbon splice holder and tie-wraps. Maximum of (10) trays in the LG-300XL. LL-4848 Splice Tray – Stores (12) mass fusion splices, includes base, cover, (1) twelve position ribbon splice holder and tie-wraps. Maximum of (10) trays in the LG-350XL. LL-2448-48S Splice Tray – Stores (48) single fusion splices. May be installed in the LG-250, LG-350, LG-350-XL, LG-410, LG-500, LG-600 Splice Closures, the LL-400B and LL-400S Distribution Enclosures and the LL-2400 Pedestal. LL-7060 Splice Tray – Stores (60) single fusion splices in an easy-to-use, deep splice tray. For use with the LG-350 and LG-350XL Closures. LL-7144 Splice Tray – Stores (288) mass fusion splices in an easy-to-use, deep splice tray. For use with the LG-350 and LG-350XL Closures. LL-7644 Universal Splice Tray – Stores (60) single fusion splices or (288) mass fusion splices or a combination of both in an easy-to-use, deep splice tray. For use with the LG-350 and LG-350XL Closures. LG-350XL Dual Axis Express Grommet Cable Grounding Kit (pack of 5) – Includes harness and hose clamp. For use with LG-350XL O-Ring Replacement Kit – For use with LG-300XL Strand Mount Hanger Bracket – For use with LG-300XL

LG-300XL-U-0

FC000010-PS

LL-4896

911676-00-02

LL-2400

91710-06

LL-2448

911289-00-02

LL-4800

91711-07

LL-4848

911437-00-02

LL-2448-48S

FA000045

LL-7060

FA000042

LL-7144

FA000043

LL-7644

FA000044

Dual Axis Exp Cable Bonding Kit - 300XL O Ring - 300XL XL Hangar Bracket

FC000664 FC000041

1X6 Fiber Router Kit

Router

FC000070

FC000016 912215-00-00

* See LL4896 Splice Tray Specifications.

© 2002, AFL, all rights reserved. PP-2-00134, Revision 7, 11.22.13 Specifications are subject to change without notice.

93

LightGuard® 700 Sealed Fiber Optic Splice Closure With a capacity for up to 288 single fusion or 432 mass fusion splices, AFL’s LightGuard (LG) 700 in-line sealed closure is suitable for use in underground and aerial applications. The LG-700 hosts a dry, permanent peripheral grommet seal that allows for easy re-entry, eliminating the need for a re-entry kit. The closure is equipped with eight cable entry ports (four at each end of the closure), which allows for additional cables to be installed without disturbing previously installed cables. The 3/8" stainless steel captive bolts require only a standard nut driver or 216 tool for installation or re-entry. The LG-700 features a grounding system that may be used for common or isolated/grounding applications. Features • Cable retention clamps provide pullout rating required by Telcordia® • Dry, permanent peripheral grommet seal allows for easy re-entry • Space for large amounts of buffer tubing with tie downs for organization and installation • Eight cable entry ports; previously installed cables are not disturbed when installing additional cables • Common or isolated grounding/bonding • Designed and tested to Telcordia GR-771 requirements Specifications PARAMETER Splice Capacity (Max.) – single, mass Number of Splice Trays (Max.) – single, mass Cable Entrance Configuration Cable Ports

VALUE 288, 432 12, 9 In-line, Butt 8 Ports

Cable Sizes (O.D.)

4 @ 0.77" 4 @ 1.00" 24.5" x 10.7" x 4.7" (62.2 x 25.4 x 11.9) 8.5 (3.85)

Dimensions (L x D) – inches (cm) Weight - lbs. (kg)

Ordering Information DESCRIPTION LG-700 Bonded Sealed In-line/Butt Closure - Equipped with (3) cable sealing/retention kits, (3) cable bonding kits, (2) single fusion splice trays Single Fusion Splice Tray - Stores 24 single fused fibers, base, cover, (1) twenty-four position fusion splice holder, tie-wraps. Universal Splice Tray - Stores 24 single fused fibers or 4 mass fusion sleeves (48 fibers), base, deep cover, tie-wraps. Mass Fusion Splice Tray - Stores 12 mass fusion sleeves (144 fibers) Base, deep cover, (1) twelve position mass sleeve holder, tie-wraps.

MODEL NO. LG-700

AFL NO. 911605-00-00

LL-2400

91710-06

LL-2448

911289-00-02

LL-4848

911437-00-02

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 1998, AFL, all rights reserved. PP-2-00128, Revision 6, 10.8.12 Specifications are subject to change without notice.

94

LightGuard® Sealed Splice Closure Accessories Closure Stand for Sealed Dome Closures Table top closure stand to be used for the LG-150/250/350/350XL closures. Can be clamped or permanently fastened to a table top to hold the closure in place during installation or maintenance. The clamp pivots 180° to allow accessibility to both sides of the frame and all cable entry ports. Ordering Information DESCRIPTION Closure Stand for Sealed Dome Closures

AFL NO. FC001176

Dual Express Grommets for LG-350XL Used on the express side of the LG-350XL closure for installing additional branches. Use the drop ports for the express cable while the express ports may be used to introduce small branch cables. Minimum cable diameter is 0.380" - 0.560". Ordering Information DESCRIPTION Dual Express Grommets for LG-350XL

AFL NO. FC000688

Dual and Quad Express Grommets for LG-350

Dual Express Grommets

Used on the express side of the LG-350 closure for installing additional branches. Use the drop ports for the express cable while the express ports may be used to introduce small branch cables. A 4-drop flat grommet may be used if drops are also required. Cable diameter for dual grommets is 0.26" - 0.44"; for quad, 0.24" - 0.382". Ordering Information

Quad Express Grommets

DESCRIPTION Dual Express Grommets for LG-350 Quad Express Grommets for LG-350

AFL NO. FC000337 FC000421

4-Port Flat Drop Grommet Kit for LG-350/LG-350-AC Used with the LG-350 and LG-350-AC Sealed Closures. Allows for quick addition of drop cables as required. Simply replace the drop port grommets with this grommet kit and install standard flat drop cable or round cable up to 0.25" in diameter. Ordering Information DESCRIPTION 4-Port Flat Drop Grommet Kit for LG-350/LG-350-AC

AFL NO. FC000422

© 2009, AFL, all rights reserved. PP-2-00120, Revision 3, 4.14.15 Specifications are subject to change without notice.

109

LightGuard® Sealed Splice Closure Accessories (cont.) Single Cable and 3-Port Flat Drop Grommet Kit for LG-150/LG-250 Used with the LG-150 and LG-250 Sealed Closures. Allows for quick addition of drop cables as required. Simply replace the drop port grommets with this grommet kit. Both closures will accept standard flat drop cable or round cable up to 0.250" in diameter. Ordering Information DESCRIPTION Single Cable Grommet Kit for the LG-150/LG-250 3-Port Flat Drop Grommet Kit for the LG-150/LG-250

AFL NO. FC000704 FC000655

Single Cable Grommet Kits for LG-350-AC and LG-350 Used with the LG-350-AC when a branch cable is required with the drop cables. May also be used for with the LG-350 as replacement grommets. Simply remove the flat drop grommet and replace with the single cable grommets. Ordering Information DESCRIPTION Single Cable Grommet Kit, Drop Port for LG-350-AC Express Single Cable Grommet Kit for LG-350 Drop Single Cable Grommet Kit for LG-350

AFL NO. FC000628 FC000726 FC000727

OPGW Cable Bracket for LG-150/LG-250/LG-350 Attaches to the outer grounding studs of the LG-150/LG-250 or LG-350 Sealed Closures. Stainless steel hose clamps secure the OPGW cable to the bracket preventing twisting or movement. Ordering Information DESCRIPTION OPGW Cable Bracket for the LG-150/LG-250/LG-350 for 2 cables. OPGW Cable Bracket Kit for use when installing Sealed Closures (LG-150/LG-250) to 4 OPGW Cables. OPGW Cable Bracket Kit for use when installing Sealed Closures (LG-350) to 4 OPGW Cables.

AFL NO. FC000683 FC000746 FC000747

Pole/Wall Mount Bracket for LG-150/LG-250/LG-350 Used with the LG-150, LG-250, LG-350 and LG-350-AC to secure the closures onto poles or walls in a vertical orientation. Slots on the brackets allow for strapping onto steel or cement poles. Ordering Information DESCRIPTION Pole/Wall Mount Bracket for LG-150/LG-250/LG-350/LG-350-AC

AFL NO. FC000592

© 2009, AFL, all rights reserved. PP-2-00120, Revision 3, 4.14.15 Specifications are subject to change without notice.

110

LightGuard® Sealed Splice Closure Accessories (cont.) Universal Aerial Bracket and Extended Offset Bracket Used with the LG-150, LG-250, LG-350 and LG-350-AC for mounting on aerial or messengers. Ordering Information DESCRIPTION Universal Aerial Bracket for LG-150/LG-250/LG-350/LG-350-AC Extended Offset Bracket

AFL NO. FC000006 FC000208

Strand Mount Hanger Bracket for LG-350XL Used with the LG-350XL. Ordering Information DESCRIPTION Strand Mount Hanger Bracket – For use with LG-350XL

AFL NO. 912215-00-00

Cable Ground Kits Used with the LG-150, LG-250 and LG-350. Ordering Information DESCRIPTION Cable Grounding Kit – Includes harness and hose clamp. One kit needed per cable entry. For use with LG-150/250/350. Cable Grounding Harness Kit – Includes (4) 8" ground harnesses constructed of #6 AWG conductor Cable Grounding Kit (pack of 5) – Includes harness and hose clamp. For use with LG-150/250/350.

AFL NO. FC000003 FC000024 FC000040

O-Ring Replacement Kits Used with the LG-150, LG-250, LG-350 and LG-350XL. Ordering Information DESCRIPTION O-Ring Replacement Kit – For use with LG-150/250 O-Ring Replacement Kit – For use with LG-300XL O-Ring Replacement Kit – For use with LG-350.

AFL NO. FC000004 FC000016 912231-00-00

1x6 Cable Router Kit Used with the LG-150, LG-250, LG-350 and LG-350-AC. Ordering Information Enlarged to show detail

DESCRIPTION 1X6 Cable Router Kit

AFL NO. FC000070

© 2009, AFL, all rights reserved. PP-2-00120, Revision 3, 4.14.15 Specifications are subject to change without notice.

111

LightLink Fiber Optic Terminal Adapters for Sealed Fiber Optic Splice Closures The LightLink Access Solution (LLAS) Terminal Adapters provide the interconnect and/or demarcation of optical fibers for Fiber-to-the-Node (FTTN), Fiber-to-the-Home (FTTH), Fiber-to-the-Premise (FTTP) and Fiber-to-the-Curb (FTTC) applications. The adapter plates are designed to be used in conjunction with AFL Sealed Fiber Optic Splice Closures and convert the standard closure design into an FTTX or demarcation type fiber optic splice closure. The adapter plates provide mounting positions ranging from six to 24 SC-style bulkheads (depending on the model). The interconnection and routing of 900 µm SC pigtails with pre-connectorized SC drop cables is managed through routing rings on the terminal adapter. Three versions are available and are matched to the LG-150, LG-250 and LG-350 series sealed fiber optic splice closures. Ordering Information LLAS-200-12SC

DESCRIPTION Terminal Adapter for LG-150/250 Sealed Splice Closure Terminal Adapter for LG-350 Sealed Splice Closure

MODEL NO. LLAS-200-12SC LLAS-300-24SC

AFL NO. FC000068 FC000069

Terminal Adapter – Empty plate Terminal Adapter – with Installed SCAPC (48) Terminal Adapter – with Installed SCUPC (48) Terminal Adapter – with Installed LCUPC Duplex SC Foot Print (48) Terminal Adapter – with Installed LCAPC Duplex SC Foot Print (48)

LLAS-350-96-LC LLAS-350-96-LC LLAS-350-96-LC LLAS-350-96-LC LLAS-350-96-LC

FC000736 FC000737 FC000738 FC000739 FC000765

Blank bulkhead adapter plate and routing rings are included. SC bulkheads, SC pigtails (900 µm) and SC pre-connectorized drop cable may be ordered separately.

Accessories Ordering DESCRIPTION (1) Small Flange SC/UPC Bulkhead adapter (Blue) (1) Small Flange SC/APC Bulkhead adapter (Green) (1) Pigtail - SC/UPC Connector with (1) meter 900µm fiber (1) Pigtail - SC/APC Connector with (1) meter 900µm fiber

AFL NO. C058475 C147880 C146507-0001 C203278-0001

LLAS-300-24SC

LLAS-200-12SC

LLAS-300-24SC

LLAS-350-96LC

© 2005, AFL, all rights reserved. PP-2-00155, Revision 4, 10.8.12 Specifications are subject to change without notice.

112

LightGuard® Aerial Weathertight Fiber Optic Splice Closures The AFL family of Aerial Weathertight Splice Closures is designed to provide a cost-effective solution for your aerial splicing needs. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures have all been designed to be installed without the need for special tools, heat, adhesives, drills or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant.

Features • Individual, patented, self-sizing cable grommets and strength member tie downs provide for cable additions without disturbing those previously installed • Unique tongue-in-groove closure seal and back-to-back grommet design provides for a weathertight and insect seal • Closures are re-enterable without the need for any re-entry kits and require only a common can wrench for installation • Designed and tested to Telcordia® GR-771 aerial weathertight closure requirements • Rural Utilities Service (RUS) Listed Specifications PARAMETER Splice Capacity (Max.) - Single, Mass, Mechanical Splice Tray Capacity - Single, Mass Cable Ports Cable Entrance Cable Sizes (O.D.)

LG-410-U-0 72, 288, 36

LG-420-U-0 12, 48, 12

LG-500-U-0 96, 288, 36

3, 2

n/a, n/a

3, 2

12, 8

4-8

4-6

4-8

6-12 (6 per end)

In-line, Butt

In-line (taut sheath)

In-line, Butt

In-line, Butt

4 @ 0.3-0.8"

4 @ 0.3-0.8"

4 @ 0.3-0.83"

6 @ 0.4-1.04"

Up to 8 with Dual Grommet Kits Up to 6 with Dual Grommet Kits Up to 8 with Dual Grommet Kits 4 @ 0.3-0.65" 2 @ 0.3-0.77" 4 @ 0.3-0.65" 4 @ 0.3-0.5" 2 @ 0.3-0.65" 4 @ 0.3-0.5" 2 @ 0.3-0.5" CLOSURE TEST 1, 2 Cable Retention (100 lbs.) Impact Resistance (0-40 °C) Chemical Resistance Cable Flexing Dust (Weather Tightness) Driving Rain Rodent Test Dimensions (L x W x D) in. (cm) Weight lbs. (kg)

LG-600-U-0 288, 1152, 96

Up to 12 with Dual Grommet Kits 6 @ 0.4-0.87" 6 @ 0.5"

Passed Passed Passed Passed Passed Passed Passed 36.00 x 8.00 x 4.00 (91.44 x 20.32 x 10.16)

Passed Passed Passed Passed Passed Passed Passed 36.00 x 8.00 x 4.00 (91.44 x 20.32 x 10.16)

Passed Passed Passed Passed Passed Passed Passed 27.00 x 8.25 x 4.00 (68.58 x 20.96 x 10.16)

Passed Passed Passed Passed Passed Passed Passed 27.00 x 11.25 x 7.50 (68.58 x 28.58 x 19.05)

8.5 (3.86)

8.5 (3.86)

6.4 (2.90)

18 (8.16)

Note 1:  Tested to Telcordia GR-771-Core and Aerial Strand requirements Note 2:  Not all Telcordia tests are listed due to space constraints; All closures are designed and tested to appropriate aerial test requirements Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00065, Revision 5, 2.3.14 Specifications are subject to change without notice.

95

LightGuard® 410 Aerial Weathertight Fiber Optic Splice Closure The AFL LightGuard (LG) 410 Aerial Weathertight Fiber Optic Splice Closure is designed for small to medium count fiber splicing (< 72 single or 288 mass) in aerial applications and provides additional fiber bundle storage with its extended length design and requires only a common can wrench for installation. Specifications

Features • Four individual, self-sizing grommeted cable ports (expandable to eight cable entrances) • Splice trays available for single, mass or mechanical splicing • Patented tongue-in-groove cover seal system and requires only a common can wrench for installation • Cable retention clamps provide pullout rating required by Telcordia • Engineered thermoplastic to meet Telcordia® aerial and UV resistance requirements • Rural Utilities Service (RUS) Listed

PARAMETER Splice Capacity (Max.) - Single, Mass, Mechanical Number of Splice Trays (Max.) - Single, Mass Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. – Min. O.D.)

VALUE 72, 288, 36 3, 2 In-line, Butt 4-8 4 @ 0.3-0.8"

Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

Up to 8 with Dual Grommet Kits 4 @ 0.3-0.65" 4 @ 0.3-0.5" 36.00 x 8.00 x 4.00 (91.44 x 20.32 x 10.16) 8.5 (3.86)

Ordering Information DESCRIPTION Aerial Weathertight Universal Fiber Optic Splice Closure, up to 72 Single fusion splices, 4 cable ports expandable to 8. Equipped w/ 4 self sealing ports, (2) grounding terminals and standard length aerial hangars. Does not include splice trays or cable grounding kits. Closure Extension Kit - Used to join multiple closures for extended sheath openings required to repair cable sheath and damaged fibers Single Fusion Splice Tray - Stores 24 Single fused fibers (maximum of 3 trays in LG-410) Universal Splice Tray - Stores 24 Single fusion or 4 Mass fusion sleeves/48 Fibers (maximum of 2 trays in LG-410) Mass Fusion Splice Tray - Stores 4 Mass fusion sleeves/48 fibers (maximum of 2 trays in LG-410) Single Fusion Splice Tray Stores 48 Single Fused Fibers 6-Port Grommet Kit Dual Grommet Cable Expansion Kit - Includes (2) LG-400 Dual Grommets and Cable Hardware Dual Grommet Replacement Kit - Includes: (10) Dual Grommets for the LG-400 Series Closures Grommet Replacement Kit, Kit - Includes: (10) Standard (single port) Grommets for the LG-400 Series Closures Cable Grounding Harness - Includes: (4) Harness 8" #6 AWG Extended Aerial Hanger Kit Adjustable Aerial Hanger Bracket Kit

MODEL NO. LG-410-U-0

AFL NO. FC000022

LG-400/500

911499-00-00

LL-2400

91710-06

LL-2448

911289-00-02

LL-4800

91711-07

LL-2448-48S LG-400/500 LG-400/LG-500 Dual Grommet Kit LG-400-Dual-Kit

FA000045 FC000573 911386-00-01 911495-00-00

LG-400-S

911496-00-00

CGH-4 LG-400/500 LG-400/500/600

FC000024 911497-00-00 FC000572

* See Accessory and Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00135, Revision 4, 10.8.12 Specifications are subject to change without notice.

96

LightGuard® 420 Aerial Weathertight Fiber Optic Splice Closure The AFL LightGuard (LG) 420 Aerial Weathertight Fiber Optic Splice Closure is designed to allow for Taut Sheath (no slack) splicing in aerial applications such as repairing cable sheath and fibers or providing mid-span access. A common can wrench is only required for installation. Specifications PARAMETER Splice Capacity (Max.) - Single, Mass, Mechanical Number of Splice Trays (Max.) - Single, Mass Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. – Min. O.D.)

VALUE 12, 48, 12 n/a, n/a In-line (taut sheath) 4-8 4 @ 0.3-0.8"

Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

Up to 6 with Dual Grommet Kits 2 @ 0.3-0.8" 2 @ 0.3-0.65" 2 @ 0.3-0.5" 36.00 x 8.00 x 4.00 (91.44 x 20.32 x 10.16) 8.5 (3.86)

Features •  Four individual, self-sizing grommeted cable ports (expandable to six cable entrances) • Taut Sheath splice module accommodates up to twelve fusion splices and supports storage of up to twelve optical connector adapters • Patented tongue-in-groove cover seal system and requires only a common can wrench for installation • Cable retention clamps provide pullout rating required by Telcordia • Engineered thermoplastic to meet Telcordia® aerial and UV resistance requirements • Protective channel allowing taut fibers or bundles to pass through the closure • Rural Utilities Service (RUS) Listed

Ordering Information DESCRIPTION Aerial Weathertight Universal Taut Sheath Splice Closure Includes: (2) 6 fiber single fusion splice organizers, (2) grounding terminals and 4 individual self sealing ports. Expandable to 8 cable ports. Does not include cable grounding kits. Closure Extension Kit - Used to join multiple closures for extended sheath openings required to repair cable sheath and damaged fibers Dual Grommet Cable Expansion Kit - Includes (2) LG-400 Dual Grommets and Cable Hardware Dual Grommet Kit - Includes (10) Dual Port Grommets Grommet Replacement Kit, Kit - Includes: (10) Standard (single port) Grommets for the LG-400 Series Closures Cable Grounding Harness - Includes: (4) Harness 8" #6 AWG Extended Aerial Hanger Kit Adjustable Aerial Hanger Bracket Kit

MODEL NO. LG-420-U-0

AFL NO. FC000023

LG-400/500

911499-00-00

LG-400/LG-500 911386-00-01 Dual Grommet Kit LG-400-Dual-Kit 911495-00-00 LG-400-S 911496-00-00 CGH-4 LG-400/500 LG-400/500/600

FC000024 911497-00-00 FC000572

* See Accessory and Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2015, AFL, all rights reserved. PP-2-00136, Revision 5, 1.5.15 Specifications are subject to change without notice.

97

LightGuard® 420 FTTx Aerial Weathertight Fiber Optic Splice Closure The AFL LightGuard (LG) 420 FTTx Aerial Weathertight Fiber Optic Splice Closures are designed to allow for Taut Sheath (no slack) splicing in aerial applications such as FTTx access networks. The LG-420 FTTx provides access for 1 to 16 subscriber drops and requires only a common can wrench for installation. Specifications

(FC000099 Model)

Features • Four individual, self-sizing grommeted cable ports: - 2 express ports - 2 multi-drop ports • Up to 16 connections with use of LGX®118 duplex adapters • Special multi-drop grommet and cable retention • Special lock-out interior enclosure • (2) 8-pack adapter plates • Patented tongue-in-groove cover seal system and requires only a common can wrench for installation • Cable retention clamps provide pullout rating required by Telcordia • Engineered thermoplastic to meet Telcordia® aerial and UV resistance requirements • P rotective channel allowing taut fibers or bundles to pass through the closure • Rural Utilities Service (RUS) Listed

PARAMETER Splice Capacity (Max.) - Single Number of Splice Trays (Max.) - Single Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. – Min. O.D.)

VALUE Up to 32 1, n/a In-line (taut sheath) 2 - express 2 - multi-drop 0.3-0.77" express 0.22-0.38" drop 36.00 x 8.00 x 4.00 (91.44 x 20.32 x 10.16)

Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

8.5 (3.86)

Ordering Information DESCRIPTION

MODEL NO.

AFL NO.

Aerial Weathertight Fiber Optic Splice Closure for FTTx applications– Includes: splice tray to accommodate up to 32 single fusion splices, (2) Blank adapter bulkheads (SC style), (2) Grounding terminals and 4 individual self-sealing ports. With an LGX118 footprint can connect up to 16 subscribers. Special interior lock out protrective closure. Does not include cable grounding kits.

LG-420-U-FTTx

FC000099

Closure Extension Kit - Used to join multiple closures for extended sheath openings required to repair cable sheath and damaged fibers

LG-400/LG-500

911499-00-00

Dual Grommet Cable Expansion Kit - Includes (2) LG-400 Dual Grommets and Cable Hardware Dual Grommet Kit - Includes (10) Dual Port Grommets

LG-400/LG-500 911386-00-01 Dual Grommet Kit LG-400-Dual-Kit 911495-00-00

Grommet Replacement Kit, Kit - Includes: (10) Standard (single port) Grommets for the LG-400 Series Closures

LG-400-S

911496-00-00

Cable Grounding Harness - Includes: (4) Harness 8" #6 AWG

CGH-4

FC000024

Extended Aerial Hanger Kit

LG-400/LG-500

911497-00-00

Adjustable Bracket

LG-400/LG-500

FC000572

* See Accessory Specifications.

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00137, Revision 6, 7.10.15 Specifications are subject to change without notice.

98

LightGuard® 500 Aerial Weathertight Fiber Optic Splice Closure The AFL LightGuard (LG) 500 Aerial Weathertight Fiber Optic Splice Closure is designed for small to medium count fiber splicing (< 96 single, 288 using LL-2448-48S splice tray or 288 mass) in aerial applications. Compact in design for congested aerial construction. and requires only a common can wrench for installation. Specifications

Features • Four individual, self-sizing grommeted cable ports • Splice trays available for single, mass or mechanical splicing • Patented tongue-in-groove cover seal system and requires only a common can wrench for installation • Cable retention clamps provide pullout rating required by Telcordia • Engineered thermoplastic to meet Telcordia® aerial and UV resistance requirements • Rural Utilities Service (RUS) Listed

PARAMETER Splice Capacity (Max.) - Single, Mass, Mechanical Number of Splice Trays (Max.) - Single, Mass Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. – Min. O.D.)

VALUE 96, 288, 36 3, 2 In-line, Butt 4-8 4 @ 0.3-0.77"

Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

Up to 8 with Dual Grommet Kits 4 @ 0.3-0.65" 4 @ 0.3-0.5" 27.00 x 8.25 x 4.00 (65.58 x 20.96 x 10.16) 6.4 (2.90)

Ordering Information DESCRIPTION

MODEL NO.

AFL NO.

Aerial Weathertight Universal Compact Splice Closure - Includes: (4) cable retention kits, (2) grounding terminals, (4) self sealing ports and standard aerial hangars. Does not include splice trays or cable grounding kits. Single Fusion Splice Tray - Stores 24 single fused fibers (maximum of 3 trays in LG-500) Universal Splice Tray - Stores 24 Single Fusion, 4 Mass fusion sleeves/48 fibers or 12 Mechanical (maximum of 2 trays in LG-500) Mass Fusion Splice Tray - Stores 4 Mass fusion sleeves/48 fibers (maximum of 2 trays in LG-500) Mass Fusion Splice Tray - Stores 12 Mass fusion sleeves/144 fibers (maximum of 2 trays in LG-500) Single Fusion Splice Tray - Stores 48 Single Fused Fibers Dual Grommet Kit - Includes: (2) small grommets and hardware Dual Grommet Kit - Includes: (10) Dual Port Grommets Closure Extension Kit - Used to join multiple closures for extended sheath openings required to repair cable sheath and damaged fibers Cable Grounding Harness - Includes: (4) Harness 8" #6 AWG Extended Aerial Hanger Kit Adjustable Aerial Hanger Kit Bracket Kit (included with closure) LG-500 6-Port Drop Cable Kit

LG-500-U-0

FC000026

LL-2400

91710-06

LL-2448

911289-00-02

LL-4800

91711-07

LL-4848

911437-00-02

LL-2448-48S Dual Grommet Kit LG-400-Dual-Kit LG-400/500

FA000045 911386-00-01 911495-00-00 911499-00-00

CGH-4 LG-400/500 LG-400/500/600 6-Port Drop Kit

FC000024 911497-00-00 FC000572 FC000573

* See Accessory and Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00138, Revision 4, 10.8.12 Specifications are subject to change without notice.

99

LightGuard® 500 FTTx Aerial Weathertight Fiber Optic Splice Closures The AFL LightGuard (LG) 500 FTTx Aerial Weathertight Fiber Optic Splice Closures are designed to allow for fiber splicing in aerial applications such as FTTx access networks. The LG-500 FTTx provides cable entry and connectivity for one to 12 subscriber drops. Specifications PARAMETER Splice Capacity (Max.) - Single Number of Splice Trays (Max.) - Single Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. – Min. O.D.)

Features • Four individual, self-sizing grommeted cable ports: - 2 express ports - 2 multi-drop ports • Up to 12 connections with use of LGX® 118 duplex adapters • Special multi-drop grommet and cable retention • Special lock-out interior enclosure • (2) 6-pack adapter plates • Patented tongue-in-groove cover seal system • Cable retention clamps provide pullout rating required by Telcordia™ • Engineered thermoplastic to meet Telcordia aerial and UV resistance requirements • Protective channel allowing taut fibers or bundles to pass through the closure • Rural Utilities Service (RUS)-listed

Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

VALUE Up to 32 1, N/A In-line 2 express 2 multi-drop 0.3-0.77" express 0.22-0.38" drop 27.00 x 8.3 x 4.00 (68.6 x 21 x 10.2) 6.4 (2.9)

Ordering Information DESCRIPTION FTTx Aerial Weathertight Fiber Optic Splice Closure includes splice tray accommodating up to 32 single fusion splices, (2) blank SC-style adapter bulkheads, (2) grounding terminals and (4) individual self-sealing ports. Connects up to 12 subscribers with an LGX® 118 footprint. Special interior lock out protective closure. Does not include cable grounding kits. Closure extension kit joins multiple closures for extended sheath openings required to repair cable sheath and damaged fibers Dual grommet cable expansion kit includes (2) LG-400 dual grommets and cable hardware Cable grounding harness includes (4) harness 8" #6 AWG Extended aerial hanger kit Adjustable bracket LG-500 6-port drop cable kit

MODEL NO. LG-500-U-FTTx

AFL NO. FC000899

LG-400/LG-500

911499-00-00

LG-400/LG-500 Dual Grommet Kit CGH-4 LG-400/LG-500 LG-400/LG-500 6-Port Drop Kit

911386-00-01 FC000024 911497-00-00 FC000572 FC000573

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2012, AFL, all rights reserved. PP-2-00139, Revision 2, 12.13.13 Specifications are subject to change without notice.

100

LightGuard® 600 Aerial Weathertight Fiber Optic Splice Closure The AFL LightGuard (LG) 600 Aerial Weathertight Fiber Optic Splice Closure is designed for high count fiber splicing (< 288 single or 1152 mass) in aerial applications where a cost-effective high cable entry closure is desired and requires only a common can wrench for installation. Specifications PARAMETER Splice Capacity (Max.) - Single, Mass, Mechanical Number of Splice Trays (Max.) - Single, Mass, Mechanical Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. – Min. O.D.)

VALUE 288, 1152, 96 12, 8, 8 In-line, Butt 4-8 6 @ 0.4-0.87"

Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

Up to 12 with Dual Grommet Kits 6 @ 0.4-0.87" 6 @ 0.5" 27.00 x 11.25 x 7.50 (68.58 x 28.58 x 19.05) 18 (8.16)

Ordering Information Features • Six individual, self-sizing grommeted cable ports (expandable to twelve cable entrances) • Splice trays available for single, mass or mechanical splicing • Patented tongue-in-groove cover seal system and requires only a common can wrench for installation • Integrated grounding clamp through aerial hangers • Cable retention clamps provide pullout rating required by Telcordia • Engineered thermoplastic to meet Telcordia® aerial and UV resistance requirements • Rural Utilities Service (RUS) Listed

DESCRIPTION Aerial Weathertight Universal High Capacity Splice Closure Includes: (4) cable retention kits, (2) gounding terminals, (6) self sealing ports and standard length aerial hangars. Does not include splice trays or cable grounding kits. Single Fusion Splice Tray - Stores 24 Single fused fibers (maximum of 12 trays in LG-600) Universal Splice Tray - Stores 24 Single Fusion or 4 Mass fusion sleeves/48 fibers (maximum of 8 trays in LG-600) Mass Fusion Splice Tray - Stores 4 Mass fusion Sleeves/48 fibers) (maximum of 8 trays in LG-600) Mass Fusion Splice Tray - Stores 12 Mass fusion sleeves /144 fibers (maximum of 6 trays in LG-300) Single Fusion Splice Tray to Accommodate 48 Splices Dual Grommet Expansion Kit - Includes: (2) Dual Grommets, (1) CSM retention clamp, cable retention clamp and cable spacer Grommet Replacement Kit - Includes: (10) LG-600 Grommets Cable Grounding Harness - Includes: (4) Harness 8" #6 AWG Extended Offset Aerial Hanger Kit Adjustable Aerial Hanger Bracket Kit SC 6-Pack Adapter Bracket Multi-drop Cable Entry Kit - Allows six cable entries 0.23-0.48"

MODEL NO. LG-600-U-0

AFL NO. FC000029

LL-2400

91710-06

LL-2448

911289-00-02

LL-4800

91711-07

LL-4848

911437-00-02

LL-2448-48S LG-600-DCEK

FA000045 911406-00-00

LG-600-S-Kit CGH-4 LG-600 LG-400/500/600 LG-600 MDG-600

91918-00 FC000024 91990-00 FC000572 FM001212 FC000352

* See Accessory and Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00140, Revision 4, 10.8.12 Specifications are subject to change without notice.

101

LightGuard® 600 FTTx Aerial Weathertight Fiber Optic Splice Closure The AFL LightGuard (LG) 600 FTTx Aerial Weathertight Fiber Optic Splice Closure is designed for express slack loop fiber access splicing in aerial applications where up to 24 customer fiber drops are required. Installation only requires a common can wrench. Specifications PARAMETER Splice Capacity (Max.) - Single, Mass Number of Splice Trays (Max.) - Single, Mass, Mechanical Cable Entrance Configuration Cable Ports Cable Sizes (Max. O.D. – Min. O.D.) Dimensions - (L x D) in. (cm) Weight - lbs. (kg)

Features • Six individual, self-sizing grommeted cable ports; 2 express ports, 4 drop ports • Up to 24 FTTx drops • Up to 12 adapters using the LG-600 expansion kit and SC 6-pack adapter brackets • Special multi-drop grommets and cable retention • Integrated aerial splicing work tray • Splice trays available for single or mass splicing • Patented tongue-in-groove cover seal system and requires only a common can wrench for installation • Integrated grounding clamp through aerial hangers • Cable retention clamps provide pullout rating required by Telcordia • Engineered thermoplastic to meet Telcordia® aerial and UV resistance requirements • R ural Utilities Service (RUS) Listed

VALUE 24, 48 (see FTTx Expansion Kit description in table below) 2, 2, 2 In-line, Butt 6 2 @ 0.4-0.87" 24 @ 0.23-0.48" 27.00 x 11.25 x 7.50 (68.58 x 28.58 x 19.05) 18 (8.16)

Ordering Information DESCRIPTION

MODEL NO.

AFL NO.

Aerial Weathertight Universal High Capacity FTTx Splice Closure Includes: (6) cable retention kits, (2) grounding terminals, (6) self sealing ports and standard length aerial hangars. Does not include splice trays or cable grounding kits.

LG-600-FTTx

FC000291

Single Fusion Splice Tray - Stores 12 Single fused fibers

LL-2450

91957-00

Universal Splice Tray - Stores 12 Single Fusion or 4 Mass fusion sleeves/48 fibers

LL-1248

911221-00-00

Mass Fusion Splice Tray - Stores 4 Mass fusion Sleeves/48 fibers)

LL-4850

91958-00

Dual Grommet Expansion Kit - Includes: (2) Dual Grommets, (1) CSM retention clamp, cable retention clamp and cable spacer

LG-600-DCEK

911406-00-00

Single Port Grommet Kit - 2 Grommets and LSM Hardware

SEG-600-1

FC000623

Single Cable Entry Grommet Kit

SEG-600

FC000356

Cable Grounding Harness - Includes: (4) Harness 8" #6 AWG

CGH-4

FC000024

Extended Offset Aerial Hanger Kit

LG-600

91990-00

Multi-drop Cable Entry Kit - Allows six cable entries 0.23-0.48"

MDG-600

FC000352

FTTx Expansion Kit - Includes: Stacker Module (1) LG-600 SC-6-Pack Bracket. Allows use of standard splice trays LL2400, 2448, 2448-48S, and 4848 plus 5 trays up to 120 single, 288 mass.

LG-600-FTTx

FC000620

* See Accessory and Splice Tray Specifications.

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00141, Revision 4, 10.8.12 Specifications are subject to change without notice.

102

Interchangeable Grommets for Fiber Optic Splice Closures and Fiber Enclosures

LL-400sx

LL-400b (inner 4 grommets)

LL-580

LG-410 Cable Sealing Grommets

LG-420

LL-500

LG-500 © 2011, AFL, all rights reserved. PP-2-00127, Revision 1, 10.8.12 Specifications are subject to change without notice.

121

Interchangeable Large Grommets for Fiber Optic Splice Closures and Fiber Enclosures

LL-400b (outer 2 grommets)

LG-600

Cable Sealing Grommets

© 2011, AFL, all rights reserved. PP-2-00127, Revision 1, 10.8.12 Specifications are subject to change without notice.

122

Interchangeable Splice Trays for Fiber Optic Splice Closures and Fiber Enclosures

LG-500

LG-410 LG-600 Optical Splice Trays

LL-4848

LL-2448-485

LL-2448

LL-400sx

LL-400b © 2011, AFL, all rights reserved. PP-2-00127, Revision 1, 10.8.12 Specifications are subject to change without notice.

123

LightGuard® Aerial Splice Closure Accessories Dual- and Multi-port Grommet Kits for LG-400/LG-500/LG-600 For use with the LG-600 Aerial Weathertight Closure. Remove the single-port grommet set from the closure and replace with the multi-port grommet set when drops are required. Retention hardware included. Ordering Information

Dual-port Grommet Kit

Multi-port Grommet Kit

DESCRIPTION Dual-port Grommet Kit for LG-400/LG-500 Diameter for large port is 0.375" - 0.65"; small port, 0.27" - 0.5" Dual Grommet Expansion Kit - Includes: (2) Dual Grommets, (1) CSM retention clamp, cable retention clamp and cable spacer Dual Grommet Replacement Kit - Includes: (10) Dual Grommets for the LG-400 Series Closures. Diameter for large port is 0.375" - 0.65"; small port, 0.27" - 0.5" Grommet Replacement Kit, Kit - Includes: (10) Standard (single port) Grommets for the LG-400 Series Closures. Diameter from 0.3" - 0.82" Grommet Replacement Kit - Includes: (10) LG-600 Grommets Diameter from 0.5" - 1.0" Multi-port Grommet Kit for LG-400/LG-500. Diameter up to 0.365" Multi-port Grommet Kit for LG-600. Diameter from 0.67" to 0.475"

AFL NO. 911386-00-01 911406-00-00 911495-00-00 911496-00-00 91918-00 FC000573 FC000352

Single-port Grommet Kit for LG-600 FTTx For use with the LG-600 Aerial Weathertight Closure. Remove the multi-port grommet set from the closure and replace with the single-port grommet set when installing a branch cable. Hardware included. Ordering Information DESCRIPTION Single-port Grommet Kit for LG-600 FTTx Single Cable Entry Grommet Kit LG-600 Hardware

AFL NO. FC000623 FC000356

Adjustable Aerial Hanger Brackets For use with all Aerial Weathertight Closures (LG-410, LG-420, LG-420 FTTx, LG-500, LG-600 and LG-600 FTTx). This pair of hanger brackets is shipped from the factory with all weathertight closures. Purchase separately for closures installed over existing utilities. Ordering Information DESCRIPTION Adjustable Aerial Hanger Brackets

AFL NO. 911497-00-00

© 2009, AFL, all rights reserved. PP-2-00119, Revision 2, 10.8.12 Specifications are subject to change without notice.

124

LightGuard® Aerial Splice Closure Accessories (cont.) SC 6-Pack Bracket for LG-600 Installs at each end of the stacker module in the LG-600. Allows up to (12) SC connectors or (24) LC connectors (using duplex connectors) to be installed in the closure. Snaps in place or use self-tapping screws to secure. Ordering Information DESCRIPTION SC 6-Pack Bracket Kit for LG-600 SC 6-Pack Adapter Bracket

AFL NO. FM001294 FM001212

Expansion Kit for LG-600 FTTx Expansion kit includes a Stacker Tray Module and one LG-600 SC-6-Pack Bracket to allow for up to six SC connections or 12 LC duplex connections. An additional bracket may be used to increase connectivity to 12 SC or 24 LC connections using duplex adapters. Allows increasing splices with LL-2400, LL-2448 and LL-2448-48S splice trays. Ordering Information DESCRIPTION Expansion Kit for LG-600 FTTx

AFL NO. FC000620

Cable Grounding Harness For use with all Aerial Weathertight Closures (LG-410, LG-420, LG-420 FTTx, LG-500, LG-600 and LG-600 FTTx). Ordering Information DESCRIPTION Cable Grounding Harness - Includes: (4) Harness 8" #6 AWG

AFL NO. FC000024

Aerial Hanger Kits For use with all Aerial Weathertight Closures (LG-410, LG-420, LG-420 FTTx, LG-500, LG-600 and LG-600 FTTx). Ordering Information DESCRIPTION Extended Aerial Hanger Kit Extended Offset Aerial Hanger Kit

AFL NO. 911497-00-00 91990-00

© 2009, AFL, all rights reserved. PP-2-00119, Revision 2, 10.8.12 Specifications are subject to change without notice.

125

LightLink Fiber Optic Splice Trays AFL’s LightLink series of Fiber Optic Splice Trays offers a variety of unique and flexible splice and storage possibilities. They are available in industry standard config­urations (single, mass). Features • In-line or butt splice capability (see model descriptions) • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon

Ordering Information—Splice Trays for Sealed Fiber Optic Splice Closures DESCRIPTION Single Fuse: 32 Mass Fuse: N/A 6.300" (L) x 2.730" (W) x 0.829" (H)

MODEL NO. LL-2425

AFL NO. FC000053

LG-55-U Max trays: 1 Single: 32 Mass: N/A

LG-150-U N/A

LG-250-U N/A

LG-350-U N/A

Single Fuse: 12 Mass Fuse: N/A 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-2450

91957-00

N/A

Max Trays: 4 Sinlge: 48 Mass: N/A

N/A

N/A

Single Fuse: N/A Mass Fuse: 8 (96 fiber) 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-4850

91958-00

N/A

Max Trays: 4 Single: N/A Mass: 32 (384 fiber)

N/A

N/A

Single Fuse: 12 Mass Fuse: 8 (96 fiber) 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-1248

911221-00-00

N/A

Max Trays: 4 Single: 48 Mass: 48 (384 fiber)

N/A

N/A

Single Fuse: 24 Mass Fuse: N/A 12.542" (L) x 4.042" (W) x 0.390" (H)

LL-2400

91710-06

N/A

N/A

Max Trays: 5 Single: 120 Mass: N/A

Max Trays: 13 Single: 312 Mass: N/A

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

103

LightLink Fiber Optic Splice Trays (cont.) Ordering Information—Splice Trays for Sealed Fiber Optic Splice Closures DESCRIPTION Single Fuse: 60 Mass Fuse: 12 (144 fiber) 12.000" (L) x 5.125" (W) x 0.485" (H)

MODEL NO. AFL NO. LL-7644 FA000044

LG-250-U N/A

Single Fuse: 24 Mass Fuse: 4 (48 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

LL-2448

Single Fuse: 48 Mass Fuse: N/A 12.542" (L) x 4.270" (W) x 0.531" (H)

LL-2448-48S FA000045

Single Fuse: N/A Mass Fuse: 12 (144 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

LL-4848

911437-00-02 Max Trays: 3 Max Trays: 8 Single: N/A Single: N/A Mass: 36 (432 fiber) Mass: 96 (1152 fiber)

Single Fuse: 96 Mass Fuse: 24 (288 fiber) 15.950" (L) x 4.875" (W) x 0.485" (H)

LL-4896

911676-00-02 N/A

Max Trays: 5 N/A Single: 480 Mass: 120 (1440 fiber)

Max Trays: 9 Single: 864 Mass: 216 (2592 fiber)

Single Fuse: 60 Mass Fuse: N/A 12.000" (L) x 5.125" (W) x 0.485" (H)

LL-7060

FA000042

Max Trays: 6 Single: 360 Mass: N/A

N/A

911289-00-02 Max Trays: 3 Single: 72 Mass: 12 (144 fiber) Mechanical: 36

Max Trays: 3 Single: 144 Mass: N/A

N/A

LG-350-U Max Trays: 6 Single: 360 Mass: 72 (864 fiber)

LG-350-AC N/A

LG-350XL-U N/A

Max Trays: 8 Single: 192 Mass: 32 (384 fiber) Mechanical: 96

N/A

N/A

Max Trays: 8 Single: 384 Mass: N/A

N/A

N/A

N/A

N/A

N/A

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

104

LightLink Fiber Optic Splice Trays (cont.) Ordering Information – Splice Trays for LG-350 and LG-350XL-U Sealed Fiber Optic Splice Closures DESCRIPTION Single Fuse: N/A Mass Fuse: 12 (144 fiber) 12.000" (L) x 5.125" (W) x 0.485" (H)

MODEL NO. LL-7144

AFL NO. FA000043

LG-350-U Max Trays: 6 Single: 360 Mass: 72 (864 fiber)

LG-350-AC N/A

LG-350XL-U N/A

Single Fuse: 36 Mass Fuse: 12 (144 fiber) 8.125" (L) x 4.875" (W) x 0.485" (H)

LL-4808L-R

FA000037

N/A

Max Trays: 4 Single: 144 Mass: 48 (576 fiber)

N/A

Single Fuse: N/A Mass Fuse: 12 (144 fiber) 8.125" (L) x 4.875" (W) x 0.485" (H)

LL-4808 R

FA000020

N/A

Max Trays: 4 Single: N/A Mass: 48 (576 fiber)

N/A

Single Fuse: 36 Mass Fuse: N/A 8.125" (L) x 4.875" (W) x 0.485" (H)

LL-4808 L

FA000021

N/A

Max Trays: 4 Single: 144 Mass: N/A

N/A

Single Fuse: N/A Mass Fuse: 24 (288 fiber) 15.950" (L) x 4.875" (W) x 0.485" (H)

LL-4896 R

FA000022

Max Trays: 5 Single: N/A Mass: 120 (1440 fiber)

N/A

Max Trays: 9 Single: N/A Mass: 216 (2592 fiber)

Single Fuse: 96 Mass Fuse: N/A 15.950" (L) x 4.875" (W) x 0.485" (H)

LL-4896 L

FA000023

Max Trays: 5 Single: 480 Mass: N/A

N/A

Max Trays: 9 Single: 864 Mass: N/A

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

105

LightLink Fiber Optic Splice Trays (cont.) Ordering Information – Splice Trays for Aerial Weathertight Fiber Optic Splice Closures DESCRIPTION MODEL NO. AFL NO. Single Fuse: 24 LL-2400 91710-06 Mass Fuse: N/A 12.542" (L) x 4.042" (W) x 0.390" (H)

LG-410-U Max Trays: 4 Single: 96 Mass: N/A

LG-420-U FTTx N/A

LG-500-U Max Trays: 4 Single: 96 Mass: N/A

LG-500-U FTTx N/A

Single Fuse: 32 Mass Fuse: N/A 6.300" (L) x 2.730" (W) x 0.829" (H)

LL-2425

FC000053

N/A

Max Trays: 1 Single: 32 Mass: N/A

N/A

Max Trays: 1 Single: 32 Mass: N/A

Single Fuse: 24 Mass Fuse: 4 (48 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

LL-2448

911289-00-02 Max Trays: 3 Single: 72 Mass: 12 (144 fiber) Mechanical: 36

N/A

Max Trays: 3 Single: 72 Mass: 12 (144 fiber) Mechanical: 36

N/A

Single Fuse: 12 Mass Fuse: N/A 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-2450

91957-00

N/A

N/A

N/A

N/A

Single Fuse: N/A LL-4848 Mass Fuse: 12 (144 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

911437-00-02 Max Trays: 3 Single: N/A Mass: 36 (432 fiber)

N/A

Max Trays: 3 Single: N/A Mass: 36 (432 fiber)

N/A

Single Fuse: N/A Mass Fuse: 8 (96 fiber) 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-4850

91958-00

N/A

N/A

N/A

N/A

Single Fuse: 12 Mass Fuse: 8 (96 fiber) 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-1248

911221-00-00 N/A

N/A

N/A

N/A

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

106

LightLink Fiber Optic Splice Trays (cont.) Ordering Information – Splice Trays for Aerial Weathertight Fiber Optic Splice Closures DESCRIPTION

MODEL NO.

AFL NO.

LG-500-U-FTTx-ISO LG-600-U

Single Fuse: 24 Mass Fuse: N/A 12.542" (L) x 4.042" (W) x 0.390" (H)

LL-2400

91710-06

N/A

Single Fuse: 32 Mass Fuse: N/A 6.300" (L) x 2.730" (W) x 0.829" (H)

LL-2425

FC000053

N/A

Single Fuse: 24 Mass Fuse: 4 (48 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

LL-2448

911289-00-02 N/A

Single Fuse: 12 Mass Fuse: N/A 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-2450

91957-00

Single Fuse: N/A Mass Fuse: 12 (144 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

LL-4848

911437-00-02 N/A

Single Fuse: N/A Mass Fuse: 8 (96 fiber) 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-4850

91958-00

Single Fuse: 12 Mass Fuse: 8 (96) 7.139" (L) x 4.294" (W) x 0.370" (H)

LL-1248

Max Trays: 1 Single: 12 Mass: N/A

LG-600-U-FTTx-ISO

Max Trays: 12 Single: 288 Mass: N/A

LG-600 FTTx Max Trays: 2 Single: 48 Mass: N/A

N/A

N/A

N/A

Max Trays: 8 Single: 192 Mass: 32 (384 fiber) Mechanical: 12

N/A

N/A

N/A

N/A

Max Trays: 2 Single: 24 Mass: N/A

N/A

Max Trays: 8 N/A Single: N/A Mass: 96 (1152 fiber)

N/A

Max Trays: 1 Single: N/A Mass: 8 (96 fiber)

N/A

N/A

Max Trays: 2 Single: N/A Mass: 16 (192 fiber)

911221-00-00 Max Trays: 1 Single: 12 Mass: 8 (96 fiber)

N/A

N/A

Max Trays: 2 Single: 24 Mass: 16 (192 fiber)

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

107

LightLink Fiber Optic Splice Trays (cont.) Ordering information – Splice Trays for Aerial Weathertight Fiber Optic Splice Closures DESCRIPTION Single Fuse: N/A Mass Fuse: 4 (48 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

MODEL NO. LL-4800

AFL NO. 91711-07

LG-410-U Max Trays: 3 Single: N/A Mass: 12 (144 fiber)

LG-500-U Max Trays: 3 Single: N/A Mass: 12 (144 fiber)

LG-600-U Max Trays: 8 Single: N/A Mass: 32 (384 fiber)

Ordering Information—Splice Trays for Fiber Optic Enclosures DESCRIPTION

MODEL NO.

AFL NO.

LL-400B WITH INTERCONNECT Max Trays: 4 Single: 96 Mass: 16 (192 fiber) Mechanical: 48

LL-400B WITHOUT INTERCONNECT Max Trays: 6 Single: 144 Mass: 24 (288 fiber) Mechanical: 72

LL-400SX WITH 2 LGX® PLATES Max Trays: 3 Single: 72 Mass: 12 (144 fiber) Mechanical: 36

LL-400SX WITHOUT LGX PLATES Max Trays: 9 Single: 216 Mass: 36 (432 fiber) Mechanical: 108

Single Fuse: 24 LL-2448 Mass Fuse: 4 (48 fiber) Mechanical : 12 12.542" (L) x 4.270" (W) x 0.531" (H)

911289-00-02

Single Fuse: 48 LL-2448-48S Mass Fuse: N/A 12.542" (L) x 4.270" (W) x 0.531" (H)

FA000045

Max Trays: 4 Single: 192 Mass: N/A

Max Trays: 6 Single: 288 Mass: N/A

Max Trays: 3 Single: 144 Mass: N/A

Max Trays: 9 Single: 432 Mass: N/A

Single Fuse: N/A LL-4848 Mass Fuse: 12 (144 fiber) 12.542" (L) x 4.270" (W) x 0.531" (H)

911437-00-02

Max Trays: 4 Single: N/A Mass: 48 (576 fiber)

Max Trays: 6 Single: N/A Mass: 72 (864 fiber)

Max Trays: 3 Single: N/A Mass: 36 (432 fiber)

Max Trays: 9 Single: N/A Mass: 108 (1296 fiber)

Single Fuse: N/A Mass Fuse: 4 (48 fiber) 12.542" (L) x 4.270" (W) x 0.531 (H)

91711-07

Max Trays: 4 Single: N/A Mass: 16 (192 fiber)

Max Trays: 6 Single: N/A Mass: 24 (288 fiber)

Max Trays: 3 Single: N/A Mass: 12 (144 fiber)

Max Trays: 9 Single: N/A Mass: 108 (1296 fiber)

LL-4800

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

108

LightLink Fiber Optic Splice Trays (cont.) Ordering Information—Splice Trays for Fiber Optic Enclosures DESCRIPTION

MODEL NO.

AFL NO. FA000043

LL-500 WITH 2 LGX PLATES N/A

LL-500 WITHOUT LGX PLATES N/A

Single Fuse: N/A Mass Fuse: 12 (144 fiber) 12.000" (L) x 5.125" (W) 0.485" (H)

LL-7144

Single Fuse: 60 Mass Fuse: 12 (144) 12.000" (L) x 5.125" (W) 0.485" (H)

LL-580

LL-7644

FA000044

N/A

N/A

Max Trays: 2 Single: 120 Mass: 24 (288 fiber)

Single Fuse: 36 Mass Fuse: N/A 8.125" (L) x 4.875" (W) x 0.485" (H)

LL-4808 L

FA000021

Max Trays: 3 Single: 108 Mass: N/A

Max Trays: 7 Single: 252 Mass: N/A

N/A

Single Fuse: N/A Mass Fuse: 12 (144 fiber) 8.125" (L) x 4.875" (W) x 0.485" (H)

LL-4808 R

FA000020

Max Trays: 3 Single: N/A Mass: 36 (432 fiber)

Max Trays: 7 Single: N/A Mass: 84 (1008 fiber)

N/A

Single Fuse: 36 Mass Fuse: 12 (144 fiber) 8.125" (L) x 4.875" (W) x 0.485" (H)

LL-4808L-R

FA000037

Max Trays: 3 Single: 108 Mass: 36 (432 fiber)

Max Trays: 7 Single: 252 Mass: 84 (1008 fiber)

Max Trays: 2 Single: 72 Mass: 24 (288 fiber)

Max Trays: 2 Single: N/A Mass: 24 (288 fiber)

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

109

LightLink Fiber Optic Splice Trays (cont.) Ordering Information – Splice Tray for Splicing Cabinets and Shelves DESCRIPTION Telescoping Splice Tray - Stores up to 48 single fusion sleeves or 12 mass fusion sleeves (144 fibers). For use in the following products: LL-300, LL-288/576, LL-720/1440, OTSS-SYS1, OSS-SYS2 and OSS-SYS1.

MODEL NO. STF-48

AFL NO. 911442-00-00

FTTx Splice Tray - Stores up to 2 single fusion sleeves. For use in the following products: ONT-760XL, ONT-3000 and CG-1500

—

DM000445

Bare Fiber Splice Tray - Stores up 24 single fusion fibers without sleeves. For use in the following products: Any product that accepts the LL-2400 splice tray

—

C184190

Ordering Information—Splice Tray Accessories DESCRIPTION 40 mm Fiber Protection Fusion Splice Sleeves, Telcordia® compliant (50 pcs. per bag) 60 mm Fiber Protection Fusion Splice Sleeves, Telcordia® compliant (50 pcs. per bag) Single Fusion Splice Chip - 6 splices per chip. (10 pcs. per kit) Single Fusion Splice Chip - 12 splices per chip. (10 pcs. per kit) Single Fusion Splice Chip - 24 splices per chip. (10 pcs. per kit) Mass Fusion Splice Chip - 4 splices per chip. (10 pcs. per kit) Mechanical Fusion Splice Tape (10 pcs. per kit) Core Tube Cable Fiber Router for routing fiber up to 8 directions. For all central core tube sizes. Loose Tube or Ribbon Router for routing fiber up to 6 directions. For all Loose Tube and up to 12 fiber Ribbon.

AFL NO. S000206 S000065 FA000034 FC000657 91745-02 FA000088 FA000089 FC000008 FC000070

Dimensions LL-2448 and LL-4848 Splice Trays

LL-4896 Splice Tray

LL-1248, LL-2450 and LL-4850 Splice Trays

LL-2400 Splice Tray

OEE Splice Tray

LL-2425 Splice Tray

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00147, Revision 7, 4.9.15 Specifications are subject to change without notice.

110

LightLink 400b Optical Splicing and Distribution Enclosure The LightLink (LL) 400b Fiber Optic Splicing and Distribution Enclosure provides for organizing, splicing and interconnecting fibers in FTTx, broadband, distribution and building entrance applications. Each LL-400b enclosure features a scratch resistant powder coated aluminum base and a fully gasketed cover. A unique self-sizing grommet design allows for express and preterminated cable installation. The LL-400b is a butt-style enclosure equipped with 6 independent cable entry/exit grommets, used for outdoor pedestal or indoor building entrance and riser splicing applications. The unit supports a maximum storage and splicing capacity of up to 240 single or 432 mass-fused fibers.

LL-400b shown with optional interconnect module

Hardware kit for external grounding (included)

When installed into an LL-400b, the Inteconnect Module supports connectivity when used with LGX-118 adapter plates (purchased seperately). It is used in outdoor pedestals or building mounted LL-400b enclosures where interconnection is required. Features

Applications

• Independent cable strain relief system • Cable entry/exit grommet seals • Fiber routing system • Splice tray support system • Supports optional interconnect modules • 240 single fusion splices • 432 mass fusion splices • Grounding hardware kit included • UL® Listed

• OSP Splicing • MDU Splicing • FTTx Distribution

Specifications PARAMETER Material Coatings Color Dimensions (H x W x D) in. (cm) Weight lbs (kg)

VALUE Chassis – aluminum Electrostatically applied, powder coat Antique white 22.75 x 11.00 x 4.0 (57.79 x 27.94 x 10.16) 6.5 (2.95)

Ordering Information DESCRIPTION LL-400b LL-400b In 1212 Pedestal LL-410 Interconnect Module, Supports Up To 2 LGX-118 Adapter Plates LL-2448 Universal Splice Tray LL-2448-48S Single Fusion Splice Tray LL-2400 Single Fusion Splice Tray LL-400 Security Kit LL-400b Large Dual-port Grommet Kit LL-400b Large Multi-port Grommet Kit LG-410/LG-500 Dual-port Grommet Kit LG410/LG500 Multi-port Grommet Kit

AFL NO. 91894-04 FM000636 911410-00-04 911289-00-02 FA000045 91710-06 FM000787 911406-00-00 FC000352 911386-00-01 FC000573

© 2002, AFL, all rights reserved. PP-2-00150, Revision 6, 6.22.15 Specifications are subject to change without notice.

134

LightLink 400s Optical Splicing and Distribution Enclosure The LightLink (LL) 400s Fiber Optic Splicing and Distribution Enclosure provides for organizing, splicing, and interconnecting fibers in FTTx, broadband, distribution and building entrance applications. Each LL-400s enclosure features a scratch resistant powder coated aluminum base and a fully gasketed cover. A unique self-sizing grommet design allows for express and preterminated cable installation. The LL-400s is a butt-style enclosure equipped with four independent cable entry/exit grommets, used for outdoor pedestal or indoor building entrance and riser splicing applications. The unit supports a maximum storage and splicing capacity of up to 72 single or 288 mass-fused fibers.

LL-400s

Features

Applications

• Independent cable strain relief system • Cable entry/exit grommet seals • Removable Hinged Front Cover • Fiber routing system • Splice tray support system • 72 single fusion splices • 288 mass fusion splices • Grounding hardware kit included • UL® Listed

• OSP Splicing • MDU Splicing • FTTx Distribution

Specifications PARAMETER Material Coatings Color Dimensions (H x W x D) in. (cm) Weight lbs (kg) LL-400s in 1010 pedestal

VALUE Chassis – aluminum Electrostatically applied, powder coat Antique white 21.63 x 6.63 x 3.25 (54.94 x 16.84 x 8.26) 4.74 (1.77)

Ordering Information DESCRIPTION LL-400s LL-400s with (2) multi-drop grommets LL-400s in 1010 Pedestal LL-4848 Mass Fusion Splice Tray LL-2448 Universal Splice Tray LL-2448-48S Single Fusion Splice Tray LL-2400 Single Fusion Splice Tray LL-400 Security Kit LL-400S Interconnect Module LG-410/LG-500 Dual-port Grommet Kit LG-410/LG-500 Multi-port Grommet Kit

AFL NO. FM000639 FM000618 FM000777 911437-00-02 911289-00-02 FA000045 91710-06 FM000787 FM000645 911386-00-01 FC000573

Hardware kit for external grounding (included)

© 2005, AFL, all rights reserved. PP-2-00151, Revision 4, 5.13.13 Specifications are subject to change without notice.

135

LightLink 500 Optical Splicing and Distribution Enclosure The LightLink (LL) 500 Optic Splicing and Distribution Enclosure provides for organizing, splicing and interconnecting fibers in broadband, distribution and building entrance applications. The enclosure features a scratch and corrosion resistant powder paint coating base and a fully gasketed hinged cover. A unique self-sizing grommet design allows for express and pre-terminated cable installation. The LL-500 supports up to five LL-2450 splice trays for up to 60 single fusion splices or three LL-4850 splice trays (not included in base unit) and an optional 12 fiber, hinged Interconnect Module. Features LL-500 with interconnect kit installed

• NEMA 3 rated enclosure • Independent cable strain relief system • Cable entry/exit grommet seals • Fiber routing system • Splice tray support system • Hinged cover

• Supports optional Interconnect Modules • Interconnect Module supports up to 12 SC bulkhead adapters • Secured with a standard padlock • 4 cable ports with standard grommets • 8 cable ports with optional expansion kits

Specifications PARAMETER Material Coatings Color Cable Ports Cable Sizes (Max. O.D. – Min. O.D.)

VALUE Steel Electrostatically applied, powder coat Antique white 4-8 4 @ 0.3-0.77"

Dimensions (H x W x D) in. (cm) Weight lbs. (kg)

Up to 8 with Dual Grommet Kits 4 @ 0.3-0.65" 4 @ 0.3-0.5" 17.5 x 9.0 x 4.0 (44.45 x 22.86 x 10.16) 6.5 (2.95)

LL-500 with LL-2450 splice tray installed

Ordering Information DESCRIPTION LL-500-U-0 LL-500 Interconnect Kit with SC UPC adapters LL-500 Interconnect Kit with SC APC adapters LL-500 Interconnect Kit without adapters LL-500 with Multi-port Grommets LL-2450 Single Fusion Splice Tray (stores 12 single fusion splices) LL-4850 Mass Fusion Splice Tray (stores 8 mass fusion sleeves - 96 fibers) LL-500 Multi-port Grommet Kit, 6 drop cable entry up to 0.37” OD

AFL NO. FM000326 FM000385 FM000407 FM000408 FM000659 91957-00 91958-00 FC000573

© 2002, AFL, all rights reserved. PP-2-00153, Revision 3, 10.9.12 Specifications are subject to change without notice.

136

LightLink 580 Optical Splicing and Distribution Enclosure The LightLink (LL) 580 Optical Splicing and Distribution Enclosure provides for organizing, splicing and interconnecting fibers in broadband, distribution and building entrance applications. The splice tray panel is equipped with LGX® 118 footprint snaps so various types of connectors may be installed. The enclosure features a scratch resistant powder coated base and a fully gasketed hinged cover. The cover was designed so that it may be installed on either side of the enclosure where there are space restrictions. The internal interconnect tray and back-plate may be removed from the enclosure and brought to a splicing table to complete splicing, fiber routing and fiber management. The cable entry base has four interchangeable configurations to allow the installation of cable through a grommet system, or through pre-installed conduit couplings.

Features Enclosure:

• Tested to meet to Telcordia® GR-2898 • NEMA 3 rated • Independent cable strain-relief for flat drop cable and 2 mm / 3 mm drops • Unique self-sealing grommet system • Self-contained inner chassis frame with separate outer housing • Dual telco can-wrench locking fasteners • Hinged cover securable with standard padlock • Internal, owner-accessible security screw • Available with a variety of connector types and cable entrance choices Interconnect Splice Tray Kit:

• Included: (2) Factory Pre-installed LL-7644 Universal Splice Tray with SC-UPC 900 µm pigtails for up to 72 connections. LC-UPC Duplex adapters may be installed for up to 144 LC connections with mass fusion. • Interconnect Tray may be purchased with either SCUPC adapters and pigtails preinstalled or LC-UPC Duplex adapters and pigtails pre-installed.

Specifications PARAMETER Material – Housing Coating Color Size (H x W x D in.) Weight (lbs) Adapters Splice

VALUE 16 Gauge Aluminum Electrostatically applied powder paint Beige 27.5" x 13.0" x 5.625" (total length: 33.5" L x 13") 15.2 (72) SC or (72) LC Duplex (2) LL-7644 up to 120 single fused fibers or 24 mass fusion sleeves (2) LL-4808 L-R up to 72 single fused fibers or 24 mass fusion sleeves

Ordering Information DESCRIPTION LL-580 Enclosure Base (No Bottom Plate or LGX® Tray) Interconnect Trays Kit, Splice/4x LGX® Interconnect Tray, with (2) LL-7644 Trays Kit, Splice/4x LGX® Interconnect Tray, 24 SCU, with (2) LL-7644 Trays Kit, Splice/4x LGX® Interconnect Tray, 24 SCA, with (2) LL-7644 Trays Kit, Splice/4x LGX® Interconnect Tray, 24 LCU, with (2) LL-7644 Trays Splice Trays LL-7644 Splice Tray used with LGX® Interconnect Tray LL-4808 L-R Splice Tray used with LGX® Interconnect Tray Plate Kits Plate Kit (2 – 2 in. NPT and 2 – 1 in. KO) Plate Kit (2 – Single Cable Grommets [L&R] and 2 – Multiport Grommets [Center]) Plate Kit (2 – Single Cable Grommets [L&R]) Plate Kit (1 – 2 in. NPT and 4 – 1 in. NPT) Plate Kit (3 – KO) Grommet and NPT Kits 1 in. NPT Kit (2 – 1 in NPT Fittings and cable hardware to be used with FM002653) 2 in. NPT Kit (2 – 2 in NPT Fittings and cable hardware to be used with FM003023) Dual Cable Grommet Kit (2/kit) Accessories Conduit Skirt

AFL NO. FM002814 FM002858-001 FM002858-SCU FM002858-SCA FM002858-LCU FA000044 FA000037 FM002653 FM001937 FM003014 FM001959 FM003023 FM003015 FM003016 911386-00-01 FM002895

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2010, AFL, all rights reserved. PP-2-00062, Revision 6, 11.11.13 Specifications are subject to change without notice.

137

LightLink 580 Optical Splicing and Distribution Enclosure Ordering Information—Pre-configured Base Enclosures DESCRIPTION Base Enclosures and Interconnect Tray LL-580, 24F SC/UPC Interconnect Kit, 24F SC/UPC Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate LL-580, 48F SC/UPC Interconnect Kit, 48F SC/UPC Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate LL-580, 72F SC/UPC Interconnect Kit, 72F SC/UPC Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate LL-580, Interconnect Kit, No Adapter Plates, No Pigtail Kit, (2) LL-7644 Splice Trays, No Bottom Plate

AFL NO. FM003248 FM003249 FM003250 FM003251

LL-580 Enclosure shown with the Cable Grommet Bottom Plate installed. Other changable plates include (from top right): Cable NPT Bottom Plate with one 2" and four 1" fittings, Cable NPT Bottom Plate with two 2" fittings, and the Blank Bottom Plate. (NOTE: the Blank Bottom Plate and the Cable NPT Bottom Plate with two 2" fittings can be used in the top and/or bottom position.)

© 2010, AFL, all rights reserved. PP-2-00062, Revision 6, 11.11.13 Specifications are subject to change without notice.

138

LightLink 24 Slim-Line Pedestal The LightLink (LL) 24 Pedestal provides a low cost solution for splicing underground fiber cable, branches and drops. The pedestal may be buried up to the burying guide lines located on the pedestal base. It is designed to allow for splicing single fusion fibers from 24 to 144 splices with use of LL-2448 or 288 MF by adding additional splice trays as required to meet maximum splice capacity. One side of the pedestal may be used for splicing optical fibers while the opposite side may be used for copper splicing of branch or drop cables. Features • Easily installed in traditional buried pedestal applications • All cable routing, retention, mounting and grounding accessories included • One (1) LL-24 splice tray included with the pedestal for up to 24 splices • Fiber routing rings allow for easy storage and maintenance of the buffer tubes and using tie-wraps, copper pairs may be secured to the mounting plate • Defer deployment cost – open buffer tubes when access to fibers is required • Standard 216-tool or similar tool required to remove the dome Applications • FTTx Networks • Local Area Networks • Outside Plant Requirements Ordering Information DESCRIPTION LL-24 Pedestal LL-2448-48S Single Fused Fiber Optic Splice Tray (48 sf) LL-2400 Single Fused Fiber Optic Splice Tray (24 sf) LL-4848 MASS Fusion Tray LL-24-FTTx Slim FTTx to Device Pedestal: with 1x4 Splitter with 1x8 Splitter

AFL NO. FE000086 FA000045 91710-06 911437-00-02 FE000206 FE000207

© 2007, AFL, all rights reserved. PP-2-00149, Revision 3, 10.8.12 Specifications are subject to change without notice.

139

LightLink 470 Fiber Optic Demarcation The LightLink (LL) 470 Fiber Optic Demarcation unit is designed for the interconnection and demarcation of optical fibers between two separate network providers. The cabinet is a NEMA 3 rated enclosure constructed with weathertight gasketing and "free breathing" components for an indoor/outdoor pole or wall mounted application. Two unique fully secured individual compartments are designed to support up to 72 optical terminations and splices. Each compartment has two self-sizing grommets which allow for expressible 0.3-1.0" diameter cable. Designed to allow for accessing the providers network for testing, performance monitoring, and fault isolation. Each side houses up to three 24-fiber fusion splice trays (two LL-2448 Splice Trays are provided). Features • Durable and scratch resistant • Powder coated antique white finish • Cost-effective • Pole or wall mounted • Indoor or outdoor installation • Removable independently locking doors Specifications PARAMETER

VALUE

Dimensions (H x W x D) in. (cm)

22 x 24 x 5 (55.88 x 60.96 x 12.7)

Weight lbs. (kg)

38 (16.57)

Ordering Information DESCRIPTION

AFL NO.

LL-470 Pole Mount

911444-00-00

Adapter Panel with 6 SC/UPC

C215602

Adapter Panel with 6 SC/APC

C215638

SC/UPC Pigtail Kit, Includes: Loaded Adapter Panel, 6 Color-Coded, 3 Meter 900 µm Pigtails

CS000755-0003

SC/APC Pigtail Kit, Includes: Loaded Adapter Panel, 6 Color-Coded, 3 Meter 900 µm Pigtails

CS002735-0003

© 2002, AFL, all rights reserved. PP-2-00152, Revision 3, 10.8.12 Specifications are subject to change without notice.

140

OptiNID® 300 Series Optical Demarcation Slack Storage Closure The OptiNID (OPN) 300 series are optical demarcation closures designed for use in either indoor or outdoor environments. Smaller to suit FTTH demarcation applications and versatile to suit Cat5 or coax connections, the OPN-327SS and the OPN-350SS are equipped to handle up to two adapters each. Configured with routing rings positioned to accommodate safe slack storage, the OPN-300 series closures can be either wall or pole-mounted for ease of use and accessibility. Features • Weather-resistant thermoplastic alloy • Self-latching, hinged cover design allows easy access without loose parts • Routing rings positioned for safe slack storage • Capacity for up to two adapters • Ground stud provided in the OPN-350SS Specifications

OPN-327SS

PARAMETER Dielectric Strength High Temperature Storage/Mold Stress °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain UV Resistance (Days Exposed) Salt Fog (Days Exposed) Flammability Chemical Resistance 30 Days at 100°F and 95% RH Material

VALUES Minimum 2500 Vrms for 1 minute 14 days at 159 (70.55) 150 day cycling from 40-140 (4.44-60) with 95% RH -40 (-40), 5 ft/lbs on all external surfaces -40 (-40), 5 ft onto concrete surface four times 24 hours at 10 psi 60 per ASTM-G26-84 60 per ASTM-BLL7-90 UL94-5V Resists chipping and/or cracking when subject to house paint, wasp spray, sulfuric acid, kerosene and sodium hydroxide UL® listed flame retardant thermoplastic alloy

Dimensions (H x W x D) in. (cm) Cable Entrance in. (cm) diameter - Input Covers

6.3 x 7.8 x 2.0 (15.7 x 19.7 x 5.0) 1 x 3/4” NPT (1.130”), 2 x 1/2” NPT (0.875”) Standard, molded-in snap finger and "F" termination

Ordering Information DESCRIPTION BASE PRODUCT 1,2 OptiNID OPN-327SS Slack Storage Box, 1 x SC/APC Adapter OptiNID OPN-350SS Slack Storage Box, 1 x SC/APC Adapter, Splice Chip, Ground Stud ACCESSORIES 3 Heyco M3234 Compression Fitting, 18 mm to 11 mm Grip (includes 4) – Left Port Only OPN-350SS

AFL NO. DM000720 DM000795 DM001171

Notes:

1. All standard OPN-300 Series configurations come equipped with a ¾" NPT fitting, rubber grommet and Heyco M4519 compression fitting. 2. Contact AFL customer service for additional configurations. 3. See OptiNID Accessory Page for additional kits.

© 2012, AFL, all rights reserved. PP-2-00132, Revision 2, 6.13.13 Specifications are subject to change without notice.

141

OptiNID® 500 Optical Demarcation Closure The OptiNID (OPN) 500 is an optical demarcation closure designed for use in either indoor or outdoor environments. Small form factor for FTTH demarcation applications, the closure is capable of housing up to six bulkhead adapters in one 118 LGX® compatible adapter plate, and is equipped with an integrated splice tray, which holds up to six single fusion splices. The OPN-500 can be either wall or pole-mounted. Features • Weather-resistant thermoplastic alloy • Self-latching, hinged cover design allows easy access without loose parts •  Capacity for one 118 LGX compatible adapter plate • Provider override for customer lock • 3/4" NPT conduit fitting, compression cable fittings or grommeted entry ports Specifications PARAMETER Dielectric Strength High Temperature Storage/Mold Stress °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain UV Resistance (Days Exposed) Salt Fog (Days Exposed) Flammability Chemical Resistance 30 Days at 100°F and 95% RH Material

VALUES Minimum 2500 Vrms for 1 minute 14 days at 159 (70.55) 150 day cycling from 40-140 (4.44-60) with 95% RH -40 (-40), 5 ft/lbs on all external surfaces -40 (-40), 5 ft onto concrete surface four times 24 hours at 10 psi 60 per ASTM-G26-84 60 per ASTM-BLL7-90 UL94-5V Resists chipping and/or cracking when subject to house paint, wasp spray, sulfuric acid, kerosene and sodium hydroxide UL® listed flame retardant thermoplastic alloy

Dimensions (H x W x D) in. (cm) Cable Entrance in. (cm) diameter - Input Covers

6.3 x 7.8 x 2.0 (15.7 x 19.7 x 5.0) 1 x 3/4” NPT (1.130”), 2 x 1/2” NPT (0.875”) Standard, molded-in snap finger and "F" termination

Ordering Information DESCRIPTION BASE PRODUCT 1,2 OptiNID OPN-500, No Adapters OptiNID OPN-500, 1 x SC/UPC Adapter OptiNID OPN-500, 1 x SC/APC Adapter OptiNID OPN-500, 6 x SC/UPC Adapters OptiNID OPN-500, 6 x SC/UPC Adapters, 6 x 1 m 900 μm Pigtails ACCESSORIES 3 Heyco M3234 Compression Fitting, 18 mm to 11 mm Grip (includes 4) – Left Port Only Kit, Six-Position Splice Chip, (includes 10)

AFL NO. DM001021 DM000550 DM000766 DM000871 DM001109 DM001171 DM000870

Notes: 1. All standard OPN-500 configurations come equipped with a ¾” NPT fitting, rubber grommet and Heyco 3231 compression fitting, along with a splice chip for six single fusion splices. 2. Contact AFL customer service for additional configurations. 3. See OptiNID Accessory Page for additional kits.

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2008, AFL, all rights reserved. PP-2-00160, Revision 5, 6.7.13 Specifications are subject to change without notice.

142

OptiNID® 760XL Optical Demarcation Closure T­ he OptiNID (OPN) 760XL is an optical demarcation closure designed for use in either indoor or outdoor environments. It is capable of housing up to 24 bulkhead adapters in two 118 LGX® compatible adapter plates and is equipped with a splice tray (LL-2425), which holds up to 24 single fusion splices. The OPN-760XL can be either wall or pole-mounted. Features •  Capacity for up to two 118 LGX compatible adapter plates • Rugged weather-resistant thermoplastic alloy • Self-latching, hinged cover design allows easy access without loose parts • Slip-in grommets allow pre-connectorized cable deployment • Provider override is provided so that technician can override customer lock • Security cover option available Specifications

OPN-760XL with optional security cover kit

PARAMETER Dielectric Strength High Temperature Storage/Mold Stress °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain UV Resistance (Days Exposed) Salt Fog (Days Exposed) Flammability Chemical Resistance 30 Days at 100 °F and 95% RH Subject to: Material Dimensions (H x W x D) in. (cm) Cable Entrances in. (cm) diameter—Input Covers

VALUES Minimum 2500 Vrms for 1 minute 14 days at 159 (70.55) 150 day cycling from 40-140 (4.44-60) with 95% RH -40 (-40), 5*/lbs on all external surfaces -40 (-40), 5* (12.7 cm) onto concrete surface 4 times 24 hours at 10 psi 60 per ASTM-G26-84 60 per ASTM-BLL7-90 UL94-5V Resists chipping and/or cracking when subject to: house paint, wasp spray, sulfuric acid, kerosene and sodium hydroxide UL® listed flame retardant thermoplastic alloy 13 x 13 x 3.75 (32.5 x 32.5 x 9.5) 4 x 0.875 (2.2)—3/4" conduit Standard – molded-in snap finger and 3/8" hex head fastener

Ordering Information

OPN-760XL with 3/4" Pipe Fitting Transition Kit

DESCRIPTION BASE PRODUCT 1,2 OptiNID OPN-760XL, No Adapters, No Security Cover OptiNID OPN-760XL, No Adapters, Security Cover ACCESSORIES 3 3/4" Pipe Fitting Transition Kit (includes 2) OPN-760XL Security Cover Kit OPN-760XL Pole Mounting Kit

AFL NO. DM001000 DM001022 DM001174 DM000923 DM000927

Notes:

1. All standard OPN-760XL configurations come equipped with four slip-in rubber grommets and a splice tray equipped for 32 single fusion splices. 2. Contact AFL customer service for additional configurations. 3. See OptiNID Accessory Page for additional kits. 3/4" Pipe Fitting Transition Kit LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2005, AFL, all rights reserved. PP-2-00161, Revision 5, 3.18.15 Specifications are subject to change without notice.

143

OptiNID® 1224 Optical Demarcation Closure T­ he OptiNID-1224 is an optical demarcation closure designed for use in either indoor or outdoor environments. It is capable of housing up to 36 bulkhead adapters in three 118 LGX® compatible adapter plates and comes equipped with a splice tray (LL-2425), which holds up to 32 single fusion splices. The OPN-1224 can be either wall or pole-mounted. Features •  Capacity for up to three 118 LGX compatible adapter plates •  Weather-resistant thermoplastic alloy •  Self-latching, hinged cover design allows easy access without loose parts •  Self-sealing individual entrance ports prevent water and insects from entering •  Provider override is provided so that technician can override customer lock Specifications PARAMETER VALUES Dielectric Strength Minimum 2500 Vrms for 1 minute High Temperature Storage/Mold Stress °F (°C) 14 days at 159 (70.55) Temperature Cycling with Humidity °F (°C) 150 day cycling from 40-140 (4.44-60) with 95% RH Impact Test °F (°C) -40 (-40), 5*/lbs on all external surfaces Drop Test °F (°C) -40 (-40), 5* (12.7 cm) onto concrete surface 4 times Rain 24 hours at 10 psi UV Resistance (Days Exposed) 60 per ASTM-G26-84 Salt Fog (Days Exposed) 60 per ASTM-BLL7-90 Flammability UL94-5V Chemical Resistance Resists chipping and/or cracking when subject to: house paint, 30 Days at 100°F and 95% RH wasp spray, sulfuric acid, kerosene and sodium hydroxide Material UL® listed flame retardant thermoplastic alloy 12.25 x 12 x 5.25 (22.80 x 22.80 x 7.60) Dimensions (H x W x D) in. (cm) 5 x 0.625 (1.5) Cable Entrances in. (cm) diameter - Output 2 x 0.75 (1.5), 1 x 0.250 (0.6) (ground wire) Cable Entrances in. (cm) diameter - Input Covers Standard - molded-in snap finger and "F" termination

Ordering Information DESCRIPTION OptiNID OPN-1224, Splice Tray, No Adapter Plate Or Adapters

AFL NO. DM000183

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2005, AFL, all rights reserved. PP-2-00159, Revision 3, 6.14.13 Specifications are subject to change without notice.

144

FPB-201 Fiber Demarcation Box AFL has designed a cost-effective solution for a protecting the passive demarcation of premise fibers. The FPB-201 is injection molded with an integral fiber retention system allowing for quick installation and a positive lock strain relief for most premise fiber cable. This device allows for the indoor and protected outdoors interconnect of up to 2 standard SC adapters in a protected white plastic enclosure to blend in most premise environments. Features and Benefits • Compact size takes up less wall space for installation • Thin profile prevents accidental damage in congested installations • Molded inner slack storage area insures minimum bend radius preventing micro bends and unnecessary loss or fiber damage • No additional tie-wraps or clamps needed due to integral positive lock strain relief • Inner tray retains up to two fusion or mechanical splice sleeves • Accepts standard SC connectors SCA or SCU • Protects fiber connection from accidental contamination or movement allowing long term preservation of connection in hostile environments • Cost-effective, passive solution protects each connection without driving project over budget • Key-hole, three screw mounting allows two of three screws to be leveled and pre-installed • Two locations available for splice and connector to reside allows flexible installation and up to two splices if needed • Removable sliding cover for easy access to complete box in congested locations Specifications PARAMETER Dimensions (mm) Weight (g) Cable count Cable Types Connection Type

VALUE 7.9" x 4.5"W x 1.2"D (200 × 115 × 30) 7 oz (200) 2 max. Most premise (floor) cables Fusion splice, mechanical splice or SC connector

Ordering Information DESCRIPTION Injection molded fiber demarcation box for up to 2 fibers

MODEL NO. FPB-201

AFL NO. DM000108

© 2002, AFL, all rights reserved. PP-2-00125, Revision 2, 5.28.13 Specifications are subject to change without notice.

145

OptiNID® Optical Demarcation Accessories Heyco Compression Fittings for OPN-300 Series and OPN-500 Used on the bottom entry ports of the OPN-300 Series and OPN-500 for a tight compression fitting. The Heyco M3234 fits into the larger left port and can compress from 18 mm to 11 mm in port size. The Heyco M3231 fits into the smaller middle and right ports and can compress from 11 mm to 4 mm. Kits include nylon locknuts. Ordering Information DESCRIPTION Heyco M3234 Compression Fitting, 18 mm to 11 mm Grip (includes 4). Left Port Only Heyco M3231 Compression Fitting, 11 mm to 4 mm Grip (includes 4). Middle and Right Port

AFL NO. DM001171 DM000911

NPT Conduit Fittings for OPN-300 Series and OPN-500 Used on the bottom entry ports of the OPN-300 series and OPN-500 as an open port or to accept NPT conduit. The ¾" NPT fitting has a through-hole size of 0.71" and can accept ¾" NPT conduit. The ½" NPT fitting has a through-hole size of 0.51" and can accept ½" NPT conduit. Kits include nylon locknuts. Ordering Information DESCRIPTION ¾" NPT Conduit Fitting (includes 4) – Left Port Only ½" NPT Conduit Fitting (includes 4) – Middle and Right Port

AFL NO. DM001170 DM000912

Rubber Grommet for OPN-300 Series and OPN-500 Used on the middle and right entry ports of the OPN-300 series and OPN-500. The rubber grommets can be easily inserted to create a grommetted entry port or to seal an unused port. Ordering Information DESCRIPTION Rubber Grommet, 0.875" (includes 10)

AFL NO. DM001119

© 2013, AFL, all rights reserved. PP-2-00120, Revision 0, 6.27.13 Specifications are subject to change without notice.

146

Opti-NID® Optical Demarcation Accessories (cont.) Splice Chip Kit for OPN-500 Used on the OPN-500 to add an additional splice chip to the splice area to increase the splice capacity to 12 single fusion splices. The chip has an adhesive back, allowing it to adhere to multiple locations within the box. Ordering Information DESCRIPTION Kit, Six-Position Splice Chip (includes 10)

AFL NO. DM000870

Pipe Transition Kit for OPN-760XL Used on the OPN-760XL to create a ¾" NPT transition fitting. The fitting slides into any of the four entry ports on the OPN-760XL and securely clips into place. The ¾" NPT fitting has a through-hole size of 0.67" and can accept ¾" NPT conduit. Ordering Information DESCRIPTION 3/4" Pipe Fitting Transition Kit (includes 2)

AFL NO. DM001174

Security Cover Kit for OPN-760XL Used on the OPN-760XL to create a lockable security cover for provider access. The cover fits over the back portion of the OPN-760XL, covering the splice tray and provider side of the adapters and locks into place with a star head bolt. Ordering Information DESCRIPTION OPN-760XL Security Cover Kit

AFL NO. DM000923

Pole Mounting Kit for OPN-760XL Used on the OPN-760XL to provide an easy pole mounting solution. The plate mounts to the back of the OPN-760XL and provides arms for straps or bolts to adhere to a pole. Ordering Information DESCRIPTION OPN-760XL Pole Mounting Kit

AFL NO. DM000927

© 2013, AFL, all rights reserved. PP-2-00120, Revision 0, 6.27.13 Specifications are subject to change without notice.

147

FASTConnect® Field-Installable Connectors

Features • No Epoxy, No Polish • Low Insertion Loss • Fiber Can Be Reinserted up to Three Times • 3.0 mm, 2.0 mm and 900 μm Cordage Compatibility • VFI Accessory to Confirm Proper Installation Applications • Premise/Enterprise Networks • LAN/WAN Connections • Patch Panels • Equipment Termination • FTTx Applications • Field Repair/Replacement • Equipment Test Leads

FASTConnect are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers. FAST Connectors are compatible with 250 µm and 900 µm optical fibers, as well as 900 µm, 2 mm and 3 mm cordage. All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination. Incorporated into this device is an innovative, translucent wedge enabling the use of a common VFI to provide a "pass/fail" signal once physical contact is achieved. Specifications PARAMETER Single-mode - UPC Insertion Loss: Single-mode - APC Multimode - PC Single-mode - UPC - APC-AU* Return Loss at Room Temperature: Single-mode Single-mode - APC-AA** Multimode Operating Temperature

VALUE Average: 0.2 dB, Maximum: 0.5 dB Average: 0.3 dB, Maximum: 0.6 dB Average: 0.1 dB, Maximum: 0.5 dB Average: -55 dB, Maximum: -45 dB Average: -55 dB, Maximum: -50 dB Average: -65 dB, Maximum: -60 dB Average: -25 dB, Maximum: -20 dB -40°C to +75°C

*Angle/Flat Cleaves **Angle/Angle Cleaves

TIA/EIA-568-C.3 Compliant TIA/EIA-604 (FOCIS) Compliant

Ordering Information FIBER TYPE FASTCONNECT SC Multimode 62.5/125 µm, OM1 Multimode 50/125 µm, OM2 Multimode 50/125 µm, OM3/OM4 compatible Single-mode, UPC Single-mode, APC-AU Single-mode, APC-AA FASTCONNECT ST Multimode 62.5/125 µm, OM1 Multimode 50/125 µm, OM2 Multimode 50/125 µm, OM3/OM4 compatible Single-mode, UPC FASTCONNECT LC Multimode 62.5/125 µm, OM1 Multimode 50/125 µm, OM2 Multimode 50/125 µm, OM3/OM4 compatible Single-mode, UPC

HOUSING CABLE AFL NO. COLOR SIZE PACKAGE OF 6

PACKAGE OF 100

Beige Black Aqua Blue Green Green

FAST-SC-MM62.5-6 FAST-SC-MM50-6 FAST-SC-MM50L-6 900 µm FAST-SC-SM-6 FAST-SC-SMAU-6 FAST-SC-SMAA-6

FAST-SC-MM62.5-100 FAST-SC-MM50-100 FAST-SC-MM50L-100 FAST-SC-SM-100 FAST-SC-SMAU-100 FAST-SC-SMAA-100*

Beige Black Aqua Blue

FAST-ST-MM62.5-6 FAST-ST-MM50-6 900 µm FAST-ST-MM50L-6 FAST-ST-SM-6

FAST-ST-MM62.5-100 FAST-ST-MM50-100 FAST-ST-MM50L-100 FAST-ST-SM-100

Beige Black Aqua Blue

FAST-LC-MM62.5-6 FAST-LC-MM50-6 900 µm FAST-LC-MM50L-6 FAST-LC-SM-6

FAST-LC-MM62.5-100 FAST-LC-MM50-100 FAST-LC-MM50L-100 FAST-LC-SM-100

* Requires FAST APC Tool Kit for installation U.S. Patents: 5,963,699 / 5,984,532 / 6,179,482 / 7,003,208 / 7,258,496

© 2005 AFL, all rights reserved. PP-2-00052, Revision 11, 6.23.15 Specifications are subject to change without notice.

148

FASTConnect® Field-Installable Connectors Accessories DESCRIPTION BOOT KITS FOR 2 MM AND 3 MM CORDAGE 2 mm Boot Kit, SC/LC/ST 3 mm Boot Kit, SC/LC/ST DUPLEX CLIPS LC Duplex Clip (LC only)

Transparent

TOOL KITS FAST UPC Tool Kit FAST UPC Tool Kit FAST APC Tool Kit

For all UPC style connectors and SC/ APC-AU (CT-30A Cleaver) For all UPC style connectors and SC/APC-AU (CT-06A Cleaver) For SC/APC-AA connectors (OX-FAC-08 Cleaver)

COLOR Black Black

CABLE SIZE 2 mm 3 mm

VISUAL FAULT IDENTIFIERS AFL NOYES® VFI 2 AFL NOYES HiLite 1.25 mm Universal Adapter (LC Connectors)

AFL NO. PACK OF 6 FAST-BOOT-2MM-6 FAST-BOOT-3MM-6

AFL NO. PACK OF 100 FAST-BOOT-2MM-100 FAST-BOOT-3MM-100

CS010437-06

CS010437-100 AFL NO. CS001201 CS010975 CS012290 AFL NO. VFI2-00-0900 VFI3-00-0900 2900-50-0010MR

Testing HOLD 1 sec

1

2 >POM<

Before Fiber Insertion

HOLD 1 sec

1

2 >POM<

After Fiber Insertion

© 2005 AFL, all rights reserved. PP-2-00052, Revision 11, 6.23.15 Specifications are subject to change without notice.

149

FASTConnect® Universal Tool Kit The FASTConnect Universal Tool Kits provide all the necessary installation tools required for fiber preparation of 250 μm or 900 μm fibers, or 900 μm, 2 mm or 3 mm cordage for AFL’s pre-polished FASTConnect. Featuring either the CT-30A, CT-06A or OX-FAC-08 fiber cleaver, the FASTConnect Universal Tool Kit contains all the industry standard termination tools required for fiber preparation. Additionally, the carrying case has adequate storage for extra FASTConnect for on-site convenience. Applications Tool Kit Contents

• Premise environments • LAN Fiber to the Desk environments • Patch panel/wiring closets • FTTx applications • Quick repair/replacement areas

Features • Industry standard fiber preparation tools • Compact design, flexible yet rugged case • Complete instructions provided

Ordering Information

CT-30A Cleaver

DESCRIPTION FASTConnect High Precision UPC/PC Tool Kit with CT-30A Cleaver FASTConnect High Precision UPC/PC Tool Kit with CT-06A Cleaver FASTConnect APC (Angle/Angle Connector) Tool Kit with OX-FAC-08

AFL NO. CS001201 CS010975 CS012290

Tool Kits include: Cleaver, FAST SC Assembly Tool, FAST LC Assembly Tool, 3 mm Cable Clamp, 2 mm Cable Clamp, 0.25/0.9 mm Cable Clamp, Fiber Stripper, Kevlar Scissors, Fiber Preperation Fluid, Lint-free Cloth Wipes, Marker Pen, Installation Instructions, Strip Length Template and a Carrying Case.

CT-06A Cleaver

OX-FAC-08 Cleaver

© 2005, AFL, all rights reserved. PP-2-00053, Revision 9, 6.23.15 Specifications are subject to change without notice.

150

Field Master® Field-Installable Connectors Field Master Connectors, for field-termination of fiber optics, feature high-precision, highreliability and low-applied connector cost. Durable metal components, industry-standard connector designs, and proven crimp technology give the customer peace-of-mind that their installed network is steady and reliable. Field Master Tool Kits come complete with all necessary tools and consumables for the professional installation of Field Master Connectors. Features

Applications

•• High-precision ceramic ferrules ensure fiber alignment and repeatable performance •• Rugged metal connector bodies provide sturdy cable terminations •• Industry standard interfaces allow interoperability with media equipment •• Meets EIA/TIA 568B performance requirements •• Field proven crimp technology improves connector/cable tensile performance

•• Premise environments •• Desk for LAN environments •• Patch panels •• Direct equipment termination •• Fiber to the Subscriber (FTTx) applications •• Repair / replacement requirements

Ordering Information CONNECTOR SC Field Master Connector (900 µm boot) SC Field Master Connector (3.0 mm boot) SC Field Master Connector (900 µm & 3.0 mm boot) SC Field Master Connector (900 µm boot) SC Field Master Connector (3.0 mm boot) SC Field Master Connector (900 µm & 3.0 mm boot) ST Field Master Connector (900 µm boot) ST Field Master Connector (3.0 mm boot) ST Field Master Connector (900 µm & 3.0 mm boot) ST Field Master Connector (900 µm boot) ST Field Master Connector (3.0 mm boot) ST Field Master Connector (900 µm & 3.0 mm boot) LC Field Master Connector (900 µm boot) LC Field Master Connector (2.0 mm boot) LC Field Master Connector (900 µm boot) LC Field Master Connector (2.0 mm boot) LC Duplex Field Master Connector (2.0 mm boot) LC Duplex Field Master Connector (2.0 mm boot)

FIBER TYPE Multimode Multimode Multimode Single-mode Single-mode Single-mode Multimode Multimode Multimode Single-mode Single-mode Single-mode Multimode Multimode Single-mode Single-mode Multimode Single-mode

BOOT COLOR Black Beige Black /Beige Blue Blue Blue Black Black Black Blue Blue Blue White White Blue Blue White Blue

AFL NO.* CS000308 CS000309 CS005144 CS000310 CS000311 CS005145 CS000316 CS000317 CS005147 CS000318 CS000319 CS005148 CS000320 CS000321 CS000322 CS000323 CS000467 CS000466

* Packaged 100 pieces per bag.

© 2002, AFL, all rights reserved. PP-2-00054, Revision 2.1, 5.17.11 Specifications are subject to change without notice.

151

Field Master® Tool Kit Field Master® Tool Kit comes with tools and consumables to professionally install Field Master® connectors. Crimp Tool sold separately. Ordering Information

Features •• Quick and easy to use •• Compact •• Complete instructions included •• For use with SC, ST, and LC Field Master ® Connectors

DESCRIPTION Field Master Tool Kit

AFL NO. FM000065

Kit includes: Strip Template Film, Lap, 5 inch disc, AL203, 3µm (10 per pack) Film, Lap, 5 inch disc, AL203, 1µm (10 per pack) Film, Lap, 5 inch disc, Diamond, 3µm (1 per pack) Rubber Polishing Pad (5”) Sharpie® Permanent Marker Fiber Stripper Kevlar Scissors Scribe Tool Polishing Puck - SC, ST Polishing Puck - LC Cletop Stick Cleaner Fiber Preparation Fluid (3 oz) Applicator Tips for Adhesive Water Bottle (1 oz) Field Installable Adhesive with MSDS (1.75 oz) Field Installable Primer with MSDS (1.75 oz) Lint Free Cloth Wipes Installation Instructions (SC, ST, LC) Carrying Case

CS000868 CS004881-10 CS004882-10 CS004883-01 C015407 C015830 CS01205 C095257 C182635 CS000446 CS000338 C008812 FPF1-00-0900 C006037 C015849 C180691 C181310 FM000413 CS004389 C199528

Crimp Tool for Field Master® Connectors ITEM DESCRIPTION Crimp Tool with Die Set (SC, ST & LC) (Crimp diameters: 0.128" hex, 0.151" hex, 0.178" hex, 0.197" hex, 0.215" hex)

AFL NO. CS000337

© 2002, AFL, all rights reserved. PP-2-00055, Revision 2, 10.24.11 Specifications are subject to change without notice.

152

FUSEConnect® Fusion-Spliced, Field-Installable Connectors AFL’s FUSEConnect fusion-spliced, field installable connectors are uniquely designed and feature only four to five components. The factory pre-polished ferrule eliminates the need for polishing, adhesives, and crimping in the field, which minimizes the potential for operator error and expensive connector scrap.

FuseConnect Connectors (SC, FC, LC, ST)

FuseConnect in Fusion Splicer

FUSEConnect utilizes a fusion splicer to terminate the connector in the field, addressing return loss concerns present in analog optical networks. This advanced process yields true APC performance for SC/APC and LC/APC configurations, and is compliant to GR-326-CORE. FUSEConnect is compatible with Fujikura fusion splicers and most other fiber holder-based fusion splicing platforms. Features

Applications

• Field installable • No adhesives, crimping or polishing • True APC performance • MM compliant to TIA/EIA568C.3 • Compatible with most fusion splicers

• Connectorization in: - RF-overlay FTTP networks - Cable TV backbone networks - Outside plant - FTTD - MDU FTTP Cabling • Central office connector replacement • Data center installation

Specifications PARAMETER Connector Type Cable Type Polish Insertion Loss Return Loss Operating Temperature

VALUE SC, LC, FC, ST 900 µm, 2 mm, 3 mm APC, UPC, PC SM: 0.15 dB (average), 0.3 dB (maximum) / MM: 0.10 dB (average), 0.3 dB (maximum) SM: ≤ -65 dB (APC), ≤ -55 dB (UPC) / MM: ≤ -35 dB (PC) -40°C to +75°C

Ordering Information CONN. BOOT TYPE TYPE SC LC FC

ST

900 µm 3 mm 900 µm 2 mm 900 µm 2 mm 3 mm 900 µm 2 mm 3 mm

UPC SM (Blue) FUSE-SC9SMU-6 FUSE-SC3SMU-6 FUSE-LC9SMU-6 FUSE-LC2SMU-6 FUSE-FC9SMU-6 FUSE-FC2SMU-6 FUSE-FC3SMU-6 FUSE-ST9SMU-6 FUSE-ST2SMU-6 FUSE-ST3SMU-6

* AFL NO. is for one pack of 6 pieces

APC SM (Green) FUSE-SC9SMA-6 FUSE-SC3SMA-6 FUSE-LC9SMA-6 FUSE-LC2SMA-6 — — — — — —

AFL NO.* PC 62.5 µm MM (Beige) FUSE-SC9M62-6 FUSE-SC3M62-6 FUSE-LC9M62-6 FUSE-LC2M62-6 FUSE-FC9M62-6 FUSE-FC2M62-6 FUSE-FC3M62-6 FUSE-ST9M62-6 FUSE-ST2M62-6 FUSE-ST3M62-6

PC 50 µm MM (Black) FUSE-SC9M50-6 FUSE-SC3M50-6 FUSE-LC9M50-6 FUSE-LC2M50-6 FUSE-FC9M50-6 FUSE-FC2M50-6 FUSE-FC3M50-6 FUSE-ST9M50-6 FUSE-ST2M50-6 FUSE-ST3M50-6

PC 50 µm LOMMF (AQUA) ** FUSE-SC9M50L-6 FUSE-SC3M50L-6 FUSE-LC9M50L-6 FUSE-LC2M50L-6 FUSE-FC9M50L-6 FUSE-FC2M50L-6 FUSE-FC3M50L-6 FUSE-ST9M50L-6 FUSE-ST2M50L-6 FUSE-ST3M50L-6

** Laser Optimized MM Fiber (LOMMF) compatible with OM3 and OM4 fibers

FuseConnect Kits—ST (blue), SC (green), LC (blue) © 2007, AFL, all rights reserved. PP-2-00056, Revision 6, 11.20.14 Specifications are subject to change without notice.

153

FUSEConnect® MPO Fusion-Spliced, Field-Terminated Connectors AFL’s FUSEConnect MPO fusion-spliced, field-terminated connectors are uniquely designed and feature just six components. With a factory pre-polished ferrule, its innovative field-termination process eliminates polishing, adhesives and crimping in the field minimizing the potential for operator error and expensive connector scrap.

FUSEConnect MPO Connectors, Cable

Designed to Fiber Optic Connector Intermateability Standard (FOCIS), Type MPO, FOCIS-5, TIA-604-5-C, AFL’s FuseConnect MPO performs as an equivalent to the standard factory terminated MPO/MTP® assemblies. Designed to utilize either ribbon or loose tube cable, this connector helps to minimize the complexity involved in the termination of a multi-fiber connection, allowing for a reliable and repeatable termination in field applications. FUSEConnect MPO is part of the FUSEConnect series splice-on connector which includes the SC, LC, ST and FC that require a fusion splicer and accessories for installations. The AFL FUSEConnect MPO Termination Kit specifically provides all the necessary accessories required for field termination of the FUSEConnect MPO.

FUSEConnect MPO Connectors, Ribbon

Features

Applications

• Field installable splice-on connector • Only six components • No adhesives, crimping or polishing • TIA-568-C.3, IEC-61754-7, and TIA/EIA-604-5 FOCIS 5 Compliant • Field MPO polarity customization • Include 3.0 mm round and optical fiber ribbon flat boots in each pack

• Connectorization in: - RF-overlay FTTP networks - Cable TV backbone networks - Outside plant - MDU FTTP Cabling • Connector restoration in the field • Data center installation • Patch cord customization in the field

Specifications PARAMETER Insertion Loss

Return Loss

Single-mode (OS1) 62.5/125 (OM1) 50/125 (OM2) 50/125 LO (OM3) Single-mode (OS1) 62.5/125 (OM1) 50/125 (OM2) 50/125 LO (OM3)

Operating Temperature

VALUE Average: 0.25 dB; Max: 0.75 dB Average: 0.10 dB; Max: 0.35 dB Average: 0.10 dB; Max: 0.35 dB Average: 0.10 dB; Max: 0.35 dB > 65 dB > 30 dB > 30 dB > 30 dB -40°C to +75°C continued on next page

© 2011, AFL, all rights reserved. PP-2-00059, Revision 1, 8.11.14 Specifications are subject to change without notice.

154

FUSEConnect® MPO Fusion-Spliced, Field-Terminated Connectors Ordering Information AFL NO.* FUSEMPO-SMA-3-M-6 FUSEMPO-SMA-3-F-6 FUSEMPO-MM6-3-M-6 FUSEMPO-MM6-3-F-6 FUSEMPO-MM5-3-M-6 FUSEMPO-MM5-3-F-6 FUSEMPO-MM5L-3-M-6 FUSEMPO-MM5L-3-F-6

CONNECTOR TYPE MPO, Male (guide pins) MPO, Female (No Guide Pins) MPO, Male (guide pins) MPO, Female (no guide pins) MPO, Male (guide pins) MPO, Female (no guide pins) MPO, Male (guide pins) MPO, Female (no guide pins)

FIBER TYPE Single-mode (OS1) Single-mode (OS1) Multimode 62.5 µm (OM1) Multimode 62.5 µm (OM1) Multimode 50 µm (OM2) Multimode 50 µm (OM2) Multimode 50 µm 10Gig (OM3) Multimode 50 µm 10Gig (OM3)

POLISH APC APC PC PC PC PC PC PC

CABLE SIZE ROUND FLAT 3.0 mm 250 µm 3.0 mm 250 µm 3.0 mm 250 µm 3.0 mm 250 µm 3.0 mm 250 µm 3.0 mm 250 µm 3.0 mm 250 µm 3.0 mm 250 µm

HOUSING COLOR Green Green Beige Beige Black Black Aqua Aqua

*Pack of 6 pieces

Ordering Information – Accessories DESCRIPTION TOOL KIT FuseConnect MPO Tool Kit ACCESSORIES FuseConnect Ribbonize Tool FuseConnect Stripping Tool (3.0 mm, 2.8 mm, 2.0 mm, and 1.6 mm) FuseConnect MPO Assembly Tool

AFL NO. FUSEMPO-TL-KT FUSE-RB-TL FUSE-ST-TL FUSE-AS-TL

© 2011, AFL, all rights reserved. PP-2-00059, Revision 1, 8.11.14 Specifications are subject to change without notice.

155

FUSEConnect® Tool Kit and Accessories

FUSEConnect Tool Kit Contents

The FUSEConnect tool kit provides all the necessary installation tools required for fiber preparation of 900 μm fiber, 2 mm or 3 mm cordage for AFL’s FUSEConnect Fusion Spliced Field Installable Connectors except for a fusion splicer and precision cleaver. Included in the kit are standard fiber preparation tools and cleaning supplies as well as a FUSEConnect accessory kit and cord splitter tool, which can be bought separately from the tool kit. The cord splitter tool is uniquely designed to open the cordage of 2 mm and 3 mm cable allowing the termination of the ST and FC type connectors on simplex cordage. Applications

Features • Industry standard fiber preparation tools • Compact design, flexible yet rugged case

• Premise environments • LAN Fiber to the Desk environments • Patch panel/wiring closets • FTTx applications • Quick repair/replacement areas FUSEConnect Accessory Kit

Cord Splitter Tool

Ordering Information DESCRIPTION

AFL NO.

FUSEConnect Tool Kit (includes items below)

FUSE-TL-KT

Tool Case Fiber Stripper Kevlar Scissors Lint-Free Wipes Fiber Preparation Fluid Permanent Marker Cord Splitter Tool FUSEConnect Accessory Kit

CS001202 CS001205 C095257 FM000413 FPF1-00-0900 C015830 FUSE-ST-TL FUSE-AC-KT

FUSEConnect Accessory Kit (includes items below)

FUSE-AC-KT

Utility Storage Box Clamp for holding 3 mm Simplex Cordage Clamp for holding 2 mm Simplex Cordage 250 μm / 900 μm Fiber Clamp 3 mm FUSEConnect Fiber Holder 2 mm FUSEConnect Fiber Holder 900 μm FUSEConnect Fiber Holder CLAMP-S70D Sheath Clamp CLAMP-S60D Sheath Clamp (Left side)

CS012351 S014704 S014705 CS004442 S014695 S014696 S014697 S015862 S014752

Cord Splitter Tool

FUSE-ST-TL

© 2013, AFL, all rights reserved. PP-2-00145, Revision 2, 6.5.14 Specifications are subject to change without notice.

156

LightLink LANSystem 1RU Fiber Termination Patch/Splice Panel The AFL 1RU Fiber Termination Patch/Splice Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 36 fibers is desired. The panel design is based on a 1 rack unit height and is provisioned with three LGX® 118 compatible mounting positions that can accommodate adapter plates, XFM® optical cassettes, passive optical modules or any combination therein. Standard 1RU Fiber Termination Patch Panels are available empty for complete field configuration, half loaded with adapter plates, or stubbed with a factory installed circular premise cable (CPC) or loose tube cable assembly. Standard 1RU Fiber Patch and Splice Panels are available empty for complete field configuration, half loaded with adapter plates and splice trays, or loaded with pigtails, adapter plates and splice trays.

Specifications • Designed around Telcordia® GR-63NEBS • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 18-fiber • High density: up to 36-fiber • LGX 118 compatible • Standard cable stub location is right rear exiting upward • 1RU Patch and Splice Panel holds up to three splice tray kits

Features

Applications

• Fits comfortably into new and existing interconnect, cross-connect, customer premise, and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • Modular design • Slide-out tray with relief cut-outs for simplified connector access • Optional splice tray kit for on site conversion to patch and splice panel • Optional front door key lock for heightened protection of internal components

• Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

Dimensions DEPTH (A) IN INCHES 13.51

WIDTH (B) IN INCHES 17.00

HEIGHT (C) IN INCHES 1.75

RACK UNITS 1

CAPACITY 18 / 36

UNLOADED WEIGHT 4 lbs.

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2008, AFL, all rights reserved. PP-2-00069, Revision 5, 3.5.14 Specifications are subject to change without notice.

157

LightLink LANSystem 1RU Fiber Termination Patch/Splice Panel Ordering Information Select the seven digit AFL panel part number, specify the color, and choose the loading character desired.

AFL NO.

Color

Loading Charactor

Cable Stub Length (M)

FM001344

B

S

0010

W = White B = Black

When ordering stubbed (S), enter the cable stub length required in meters. Note: Standard stub is Circular Premise Cable (CPC).

E = Empty H = Half-loaded with adapters L = Loaded with adapters and pigtails (Patch and Splice only) S = Preterminated with tight buffered CPC cable stub (Riser) (Patch only) R = Preterminated with OSP loose tube cable stub (Patch only)

0002 = 2 meters 0004 = 4 meters etc.

Example: Order number for a panel Black in color, loaded with 12 PSC adapters (2 six packs), connectors and a cable stub 10 meters in length.

Ordering Information

Accessories DESCRIPTION Splice Tray Kit: Single Fusion, 12 fiber, 1RU Patch Panel Standard Density (1 splice tray) Splice Tray Kit: Single Fusion, 12 fiber, 1RU Patch Panel High Density (2 splice trays) Ribbon Splice Tray Kit: Mass Fusion, 12 fiber, 1RU Patch Panel Standard Density (1 splice tray) Ribbon Splice Tray Kit: Mass Fusion, 12 fiber, 1RU Patch Panel High Density (2 splice trays) Kit, Lock, for CON/CNS Panels

CONFIGURATION AFL NO. CON012P—1 RU PATCH PANELS—12 FIBERS—LGX118 EMPTY FM001038 12 PSC adapters (2 Six Packs) FM001344 12 UST adapters (2 Six Packs) FM001346 12 PST adapters (2 Six Packs) FM001347 6 UDL (dup) adapters (2 Three Packs) FM001353 6 PDL (dup) adapters (2 Three Packs) FM001354 12 ASC adapters (2 Six Packs) FM001352 12 UFC adapters (2 Six Packs) FM001349 12 USC (ZR) adapters (2 Six Packs) FM001351 12 AFC adapters (2 Six Packs) FM001350 CON024HD—1 RU HIGH DENSITY PATCH PANELS—24 FIBERS—LGX118 24 UST adapters (2 Twelve Packs) FM001355 24 PST adapters (2 Twelve Packs) FM001356 12 PDL (dup) adapters (2 Six Packs) FM001348 12 USF (dup) adapters (2 Six Packs) FM001357 12 ASF (dup) adapters (2 Six Packs) FM001358

AFL NO. FM002826-1 FM002826-2 FM002826-1R FM002826-2R FM001318

Connector/Adapter Key

CNS012P—1U PATCH AND SPLICE PANELS—12 FIBERS—LGX118 EMPTY FM001328 12 PSC adapters (2 Six Packs), Splice Tray FM001323 12 UST adapters (2 Six Packs), Splice Tray FM001329 12 PST adapters (2 Six Packs), Splice Tray FM001325 6 UDL (dup) adapters (2 Three Packs), Splice Tray FM001334 6 PDL (dup) adapters (2 Three Packs), Splice Tray FM001335 12 ASC adapters (2 Six Packs), Splice Tray FM001333 12 UFC adapters (2 Six Packs), Splice Tray FM001330 12 USC (ZR) adapters (2 Six Packs), Splice Tray FM001332 12 AFC adapters (2 Six Packs), Splice Tray FM001331 CNS024HD—1 RU HIGH-DENSITY PATCH & SPLICE PANELS—24 FIBERS—LGX118 24 UST adapters (2 Twelve Packs), Splice Tray FM001336 24 PST adapters (2 Twelve Packs), Splice Tray FM001337 12 USF (dup) adapters (2 Six Packs), Splice Tray FM001338 12 ASF (dup) adapters (2 Six Packs), Splice Tray FM001339

TYPE ASC ASF

DESCRIPTION SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM

PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

© 2008, AFL, all rights reserved. PP-2-00069, Revision 5, 3.5.14 Specifications are subject to change without notice.

158

LightLink LANSystem 2RU Fiber Termination Patch/Splice Panel The AFL 2RU Fiber Termination Patch/Splice Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 72 fibers is desired. The panel design is based on a 2 rack unit height and is provisioned with three LGX® 118 compatible mounting positions that can accommodate adapter plates, XFM optical cassettes, passive optical modules or any combination therein. Standard 2RU Fiber Termination Patch Panels are available empty for complete field configuration, half loaded with adapter plates, or stubbed with a factory installed circular premise cable (CPC) or loose tube cable assembly. Standard 2RU Fiber Patch and Splice Panels are available empty for complete field configuration, half loaded with adapter plates and splice trays, or loaded with pigtails, adapter plates and splice trays.

Specifications • Designed around Telcordia® GR-63NEBS • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 36 fiber • High density: up to 72 fiber • LGX 118 compatible • Standard cable stub location is right rear exiting upward • 2RU Patch and Splice Panel holds up to four splice tray kits

Features

Applications

• Fits comfortably into new and existing interconnect, cross-connect, customer premise, and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • Modular design • Slide-out tray with relief cut-outs for simplified connector access • Optional splice tray kit for on site conversion to patch and splice panel • Optional front door key lock for heightened protection of internal components

• Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

Dimensions DEPTH (A) IN INCHES 13.51

WIDTH (B) IN INCHES 17.00

HEIGHT(C) IN INCHES 3.50

RACK UNITS 2

CAPACITY 36 / 72*

UNLOADED WEIGHT 5 lbs.

* 72 fiber capacity not available in Patch and Splice configuration.

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2008, AFL, all rights reserved. PP-2-00070, Revision 5, 3.5.14 Specifications are subject to change without notice.

159

LightLink LANSystem 2RU Fiber Termination Patch/Splice Panel Ordering Information Select the seven digit AFL panel part number, specify the color, and choose the loading character desired.

AFL NO.

Color

Loading Charactor

Cable Stub Length (M)

FM001411

B

S

0010

W = White B = Black

When ordering stubbed (S), enter the cable stub length required in meters. Note: Standard stub is Circular Premise Cable (CPC).

E = Empty H = Half-loaded with adapters L = Loaded with adapters and pigtails (Patch and Splice only) S = Preterminated with tight buffered CPC cable stub (Riser) (Patch only) R = Preterminated with OSP loose tube cable stub (Patch only)

0002 = 2 meters 0004 = 4 meters etc.

Example: Order number for a panel Black in color, loaded with 24 PSC adapters (4 six packs), connectors and a cable stub 10 meters in length.

Ordering Information

Accessories

CONFIGURATION CON024P—2 RU PATCH PANELS—24 FIBERS—LGX118

AFL NO.

DESCRIPTION

AFL NO.

EMPTY 24 PSC adapters (4 Six Packs) 118 LGX (Beige) 24 UST adapters (4 Six Packs) 118 LGX 24 PST adapters (4 Six Packs) 118 LGX 12 UDL (dup) adapters (4 Three Packs) 118 LGX (Blue) 12 PDL (dup) adapters (4 Three Packs) 118 LGX (Beige) 24 ASC adapters (4 Six Packs) 118 LGX (Green) 24 UFC adapters (4 Six Packs) 118 LGX 24 USC (ZR) adapters (4 Six Packs) 118 LGX (Blue) 24 AFC adapters (4 Six Packs) 118 LGX

FM001029 FM001433 FM001434 FM001435 FM001441 FM001442 FM001439 FM001436 FM001438 FM001437

Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04 (1 splice tray) Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04 (2 splice trays) Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04 (3 splice trays) Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04 (4 splice trays) Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04, Ribbon (1 splice tray) Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04, Ribbon (2 splice trays) Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04, Ribbon (3 splice trays) Splice Tray Kit: Mass Fusion, 12 fiber, 2RU, WME02, WME04, Ribbon (4 splice trays) Kit, Lock, for CON / CNS Panels

FM002827-1 FM002827-2 FM002827-3 FM002827-4 FM002827-1R

CNS024P—2U PATCH AND SPLICE PANELS—24 FIBERS—LGX118 EMPTY 24 PSC adapters (4 Six Packs) 118 LGX, Splice tray 24 UST adapters (4 Six Packs) 118 LGX, Splice tray 24 PST adapters (4 Six Packs) 118 LGX, Splice tray 12 UDL (dup) adapters (4 three Packs)118 LGX , Splice tray 12 PDL (dup) adapters (4 three Packs)118 LGX , Splice tray 24 ASC adapters (4 Six Packs) 118 LGX, Splice tray 24 UFC adapters (4 Six Packs) 118 LGX, Splice tray 24 USC (ZR) adapters (4 Six Packs) 118 LGX, Splice tray 24 AFC adapters (4 Six Packs) 118 LGX, Splice tray

FM002827-2R FM002827-3R FM002827-4R FM001318

Connector/Adapter Key

FM001414 FM001411 FM001412 FM001413 FM001419 FM001420 FM001418 FM001415 FM001417 FM001416

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

TYPE

DESCRIPTION

ASC ASF

SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM

PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

© 2008, AFL, all rights reserved. PP-2-00070, Revision 5, 3.5.14 Specifications are subject to change without notice.

160

LightLink LANSystem 3RU Fiber Termination Patch Panel The AFL 3RU Fiber Termination Patch Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 96 fibers is desired. The panel design is based on a 3 rack unit height with a master plate that is provisioned with nine LGX® 118 compatible mounting positions that can accommodate adapter plates, XFM® optical cassettes, passive optical modules or any combination therein. Standard 3RU Fiber Termination Patch Panels are available empty for complete field configuration, half loaded with adapter plates, or stubbed with a factory installed circular premise cable (CPC) or loose tube cable assembly. Specifications • Telcordia® GR-63 NEBS Tested • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 48-fiber • High density: up to 96-fiber • LGX 118 compatible • Standard cable stub location is right rear exiting upward

Features

Applications

• Fits comfortably into new and existing interconnect, cross-connect, customer premise, and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • LGX compatible master plate (118 mm) • Modular design • Provides maximum protection of optical components

• Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

Dimensions DEPTH (A) IN INCHES

WIDTH (B) IN INCHES

HEIGHT (C) IN INCHES

RACK UNITS

FIBER CAPACITY

UNLOADED WEIGHT

MATERIAL GAUGE

11.00

17.00

5.25

3

48/96

8.4 lbs.

2.03 mm

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00077, Revision 5, 5.27.15 Specifications are subject to change without notice.

161

LightLink LANSystem 3RU Fiber Termination Patch Panel Ordering Information Select the seven digit AFL part number you need, specify black or white, and choose the loading character desired.

AFL NO.

Color

Loading Charactor

Cable Stub Length (M)

C211291

B

S

0010

W = White B = Black

When ordering stubbed (S), enter the cable stub length required in meters. Note: Standard stub is Circular Premise Cable (CPC).

E = Empty H = Half-loaded with adapters S = Preterminated with tight buffered CPC cable stub (Riser) (Patch only) R = Preterminated with OSP loose tube cable stub (Patch only)

0002 = 2 meters 0004 = 4 meters etc.

Example: Order number for a panel Black in color, loaded with 48 PSC adapters (8 six packs), connectors and a cable stub 10 meters in length.

Configuration Part Numbers All cable clamps offered separately so that customers may choose the

correct clamp for their application.

Connector/Adapter Key

CONFIGURATION AFL NO. CON048P—3 RU PATCH PANELS—48 FIBERS—LGX118 EMPTY C211291 48 USC (PB) adapters (8 Six Packs) C211300 48 PSC adapters (8 Six Packs) C211309 48 UST adapters (8 Six Packs) C211336 48 PST adapters (8 Six Packs) C211345 24 UDL (dup) adapters (8 Three Packs) FM000181 24 PDL (dup) adapters (8 Three Packs) FM000182 48 ASC adapters (8 Six Packs) C213928 48 UFC adapters (8 Six Packs) C213916 48 USC (ZR) adapters (8 Six Packs) C213923 48 AFC adapters (8 Six Packs) C213919 48 ULC adapters (8 Six Packs) C213934 24 PSF (dup) adapters (8 Three Packs) FM000183 24 USF (dup) adapters (8 Three Packs) FM000184 24 ASF (dup) adapters (8 Three Packs) FM000185 48 MTRJ adapters (8 Six Packs) FM000186 CON096HD—3 RU HIGH DENSITY PATCH PANELS—96 FIBERS—LGX118 96 UST adapters (8 Twelve Packs) FM000187 96 PST adapters (8 Twelve Packs) FM000188 48 UDL (dup) adapters (8 Six Packs) C211349 48 PSF (dup) adapters (8 Six Packs) C211313 48 PDL (dup) adapters (8 Six Packs) C211360 48 USF (dup) adapters (8 Six Packs) FM000189 48 ASF (dup) adapters (8 Six Packs) FM000190

TYPE

DESCRIPTION

ASC ASF

SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM

PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

© 2002, AFL, all rights reserved. PP-2-00077, Revision 5, 5.27.15 Specifications are subject to change without notice.

162

LightLink LANSystem 4RU Fiber Termination Patch Panel The AFL 4RU Fiber Termination Patch Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 144 fibers is desired. The panel design is based on a 4 rack unit height with a master plate that is provisioned with 12 LGX® 118 compatible mounting positions that can accommodate adapter plates, XFM® optical cassettes, passive optical modules or any combination therein. Standard 4RU Fiber Termination Patch Panels are available empty for complete field configuration, half loaded with adapter plates, or stubbed with a factory installed circular premise cable (CPC) or loose tube cable assembly. Specifications

Features

Applications

• Telcordia GR-63 NEBS Tested • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 72-fiber • High density: up to 144-fiber • LGX 118 compatible • Standard cable stub location is right rear exiting upward

• Fits comfortably into new and existing interconnect, cross-connect, customer premise, and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • LGX compatible master plate and footprint (118 mm) • Modular design • Provides maximum protection of optical components

• Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

®

Dimensions DEPTH (A) IN INCHES

WIDTH (B) IN INCHES

HEIGHT (C) IN INCHES

RACK UNITS

FIBER CAPACITY

UNLOADED WEIGHT

MATERIAL GAUGE

11.00

17.00

7.00

4

72/96/144

9 lbs.

2.03 mm

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00071, Revision 6, 5.27.15 Specifications are subject to change without notice.

163

LightLink LANSystem 4RU Fiber Termination Patch Panel Ordering Information Select the seven digit AFL panel part number, specify the color, and choose the loading character desired.

AFL NO.

Color

Loading Charactor

Cable Stub Length (M)

C211381

B

S

0010

W = White B = Black

When ordering stubbed (S), enter the cable stub length required in meters. Note: Standard stub is Circular Premise Cable (CPC).

E = Empty H = Half-loaded with adapters S = Preterminated with tight buffered CPC cable stub (Riser) (Patch only) R = Preterminated with OSP loose tube cable stub (Patch only)

0002 = 2 meters 0004 = 4 meters etc.

Example: Order number for a panel Black in color, loaded with 72 PSC adapters (12 six packs), connectors and a cable stub 10 meters in length.

Ordering Information CONFIGURATION CON072P—4 RU PATCH PANELS—72 FIBERS—LGX118 EMPTY 72 USC (PB) adapters (12 Six Packs) 72 PSC adapters (12 Six Packs) 72 UST adapters (12 Six Packs) 72 PST adapters (12 Six Packs) 36 UDL (dup) adapters (12 Three Packs) 36 PDL (dup) adapters (12 Three Packs) 72 ASC adapters (12 Six Packs) 72 UFC adapters (12 Six Packs) 72 USC (ZR) adapters (12 Six Packs) 72 AFC adapters (12 Six Packs) 72 ULC adapters (12 Six Packs) 36 PSF (dup) adapters (12 Three Packs) 36 USF (dup) adapters (12 Three Packs) 36 ASF (dup) adapters (12 Three Packs) 72 MTRJ adapters (12 Six Packs)

CON096P—4 RU PATCH PANELS—96 FIBERS—LGX118 EMPTY 96 USC (PB) adapters (12 Eight Packs) 96 PSC adapters (12 Eight Packs) 96 UST adapters (12 Eight Packs) 96 PST adapters (12 Eight Packs) 96 ASC adapters (12 Eight Packs) 96 UFC adapters (12 Eight Packs) 96 USC (ZR) adapters (12 Eight Packs) 96 AFC adapters (12 Eight Packs) 96 MTRJ adapters (12 Eight Packs)

AFL NO.

CONFIGURATION AFL NO. CON144HD—4 RU HIGH DENSITY PATCH PANELS—144 FIBERS—LGX118 EMPTY FM000344 72 UDL (dup) adapters (12 Six Packs) C211432 72 ADL (dup) adapters (12 Six Packs) FM000345 72 PSF (dup) adapters (12 Six Packs) C211396 72 PDL (dup) adapters (12 Six Packs) C211439 72 USF (dup) adapters (12 Six Packs) FM000196 72 ASF (dup) adapters (12 Six Packs) FM000197 144 UST adapters (12 Twelve Packs) FM000198 144 PST adapters (12 Twelve Packs) FM000199 144 UFC adapters (12 Twelve Packs) FM000200 144 USC (PB) adapters (12 Twelve Packs) FM000133 144 ASC adapters (12 Twelve Packs) FM000201

C211372 C211381 C211390 C211417 C211426 FM000191 FM000192 C213955 C213941 C213952 C213946 C213959 FM000193 FM000136 FM000194 FM000195

Connector/Adapter Key

FM000344 FM000202 FM000203 C213964 FM000204 C213982 C213970 C213977 C213973 FM000205

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

TYPE

DESCRIPTION

ASC ASF

SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM

PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

© 2002, AFL, all rights reserved. PP-2-00071, Revision 6, 5.27.15 Specifications are subject to change without notice.

164

LightLink LANSystem 5RU Fiber Termination Patch Panel The AFL 5RU Fiber Termination Patch Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 288 fibers is desired. The panel design is based on a 5 rack unit height with a master plate that is provisioned with twelve LGX® 170 compatible mounting positions that can accommodate adapter plates, XFM® optical cassettes, passive optical modules or any combination therein. Standard 5RU Fiber Termination Patch Panels are available empty for complete field configuration, half loaded with adapter plates, or stubbed with a factory installed circular premise cable (CPC) or loose tube cable assembly. High density panels utilize two 144 fiber stubs for 288 terminations. Specifications

Features

Applications

• Telcordia® GR-63 NEBS Tested • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 144-fiber • High density: up to 288-fiber • LGX 170 compatible • Standard cable stub location is right rear exiting upward

• Fits comfortably into new and existing interconnect, cross-connect, customer premise,and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • LGX compatible master plate (170 mm) • Modular design • Provides maximum protection of optical components

• Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

Dimensions DEPTH (A) IN INCHES

WIDTH (B) IN INCHES

HEIGHT (C) IN INCHES

RACK UNITS

FIBER CAPACITY

UNLOADED WEIGHT

MATERIAL GAUGE

11.00

17.00

8.75

5

144/288

9 lbs.

2.03 mm

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00080, Revision 6, 5.27.15 Specifications are subject to change without notice.

165

LightLink LANSystem 5RU Fiber Termination Patch Panel Ordering Information Select the seven digit AFL panel part number, specify the color, and choose the loading character desired.

AFL NO.

Color

Loading Charactor

Cable Stub Length (M)

C211462

B

S

0010

W = White B = Black

When ordering stubbed (S), enter the cable stub length required in meters. Note: Standard stub is Circular Premise Cable (CPC).

E = Empty H = Half-loaded with adapters S = Preterminated with tight buffered CPC cable stub (Riser) (Patch only) R = Preterminated with OSP loose tube cable stub (Patch only)

0002 = 2 meters 0004 = 4 meters etc.

Example: Order number for a panel Black in color, loaded with 144 PSC adapters (12 six packs), connectors and a cable stub 10 meters in length.

Ordering Information

Connector/Adapter Key

CONFIGURATION AFL NO. CON144P—5 RU PATCH PANELS—144 FIBERS—LGX170 EMPTY C211453 144 USC (PB) adapters (12 Twelve Packs) C211462 144 PSC adapters (12 Twelve Packs) C211471 144 UST adapters (12 Twelve Packs) C211498 144 PST adapters (12 Twelve Packs) C211507 72 UDL (dup) adapters (12 Six Packs) FM000206 72 PDL (dup) adapters (12 Six Packs) FM000207 144 ASC adapters (12 Twelve Packs) C214009 144 UFC adapters (12 Twelve Packs) C213995 144 USC (ZR) adapters (12 Twelve Packs) C214006 72 PSF (dup) adapters (12 Six Packs) FM000208 72 USF (dup) adapters (12 Six Packs) FM000209 72 ASF (dup) adapters (12 Six Packs) FM000210 144 MTRJ adapters (12 Twelve Packs) FM000211 CON288HD—5 RU HIGH DENSITY PATCH PANELS (USES TWO 144 STUBS)—LGX170

144 UDL (dup) adapters (12 Twelve Packs) 144 ADL (dup) adapters (12 Twelve Packs) 144 PDL (dup) adapters (12 Twelve Packs) 144 PSF (dup) adapters (12 Twelve Packs) 144 USF (dup) adapters (12 Twelve Packs) 144 ASF (dup) adapters (12 Twelve Packs)

TYPE

DESCRIPTION

ASC ASF

SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM

PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

C211511 FM000346 C211522 C211475 FM000212 FM000213

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

© 2002, AFL, all rights reserved. PP-2-00080, Revision 6, 5.27.15 Specifications are subject to change without notice.

166

LightLink LANSystem 6RU Fiber Patch and Splice Panel The AFL 6RU Fiber Patch and Splice Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 96 fibers is desired. The two panel design is based on a 6-rack unit height comprised of a 3RU Termination Patch Panel and a 3RU Optical Splice Shelf. The 3RU Termination Patch Panel is provisioned with nine LGX® 118 compatible mounting positions. The 3RU Optical Splice Shelf utilizes two STF-48 telescoping splice drawers. Standard 6RU Fiber Patch and Splice Panels are available empty for complete field configuration, half loaded with adapter plates and STF-48 telescoping splice trays, or loaded with pigtails, adapter plates and STF-48 telescoping splice trays. Specifications • Designed around Telcordia GR-63NEBS • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 48-fiber • High density: up to 96-fiber • Fiber storage capacity—one meter per spliced fiber (3 mm jacket) • Uses two STF-48 telescoping splice drawers • Two panel package—3U patch, 3U splice • Nine LGX 118 mm positions ®

Features

Applications

• Fits comfortably into new and existing interconnect, cross-connect, customer premise and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • LGX-compatible master plate (118 mm) • Modular design • Compact and versatile method of organizing splicing and connectivity • Provides maximum protection of optical components

• Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

Dimensions DEPTH (A) IN INCHES

WIDTH (B) IN INCHES

HEIGHT (C) IN INCHES

RACK UNITS

FIBER CAPACITY

11.00

17.00

10.5

6

48/96

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00073, Revision 5, 5.27.15 Specifications are subject to change without notice.

167

LightLink LANSystem 6RU Fiber Patch and Splice Panel Ordering Information Select the seven-digit AFL panel part number, specify the color and choose the loading character desired.

AFL NO.

Color

Loading Charactor

C211543

B

S

W = White B = Black Example: Order number for a panel Black in color, loaded with, master plate, adapter plates, 48 USC adapters (8 Six packs), splice drawer (48 and up), pigtails with connectors, hardware, cable clamp.

E = Empty H = Half-loaded with adapters L = Loaded with adapters and pigtails

Empty - Includes master plate, mounting hardware, cable clamp. Unloaded - Includes master plate, adapter plates, adapters, splice drawer (48 & up), hardware, cable clamp. Loaded - Includes master plate, adapter plates, adapters, splice drawer (48 & up), pigtails with connectors, hardware, cable clamp.

Configuration Part Numbers

Accessories DESCRIPTION STF-48 Telescoping Splice Drawer

CONFIGURATION AFL NO. CNS048P—6U PATCH & SPLICE PANELS (1 EA. 3U PATCH, 3U SPLICE)—LGX118 EMPTY C211534 48 USC (PB) adapters (8 Six Packs) Splice Drawer (2-48 position) C211543 48 PSC adapters (8 Six Packs) Splice Drawer (2-48 position) C211552 48 UST adapters (8 Six Packs) Splice Drawer (2-48 position) C211579 48 PST adapters (8 Six Packs) Splice Drawer (2-48 position) C211588 24 UDL (dup) adapters (8 Three Packs) Splice Drawer (2-48 position) FM000234 24 PDL (dup) adapters (8 Three Packs) Splice Drawer (2-48 position) FM000235 48 ASC adapters (8 Six Packs) Splice Drawer (2-48 position) C210928 48 UFC adapters (8 Six Packs) Splice Drawer (2-48 position) C210913 48 USC (ZR) adapters (8 Six Packs) Splice Drawer (2-48 position) C210922 AFC adapters (8 Six Packs) Splice Drawer (2-48 position) C210917 ULC adapters (8 Six Packs) Splice Drawer (2-48 position) C210931 24 PSF (dup) adapters (8 Three Packs) Splice Drawer (2-48 position) FM000236 24 USF (dup) adapters (8 Three Packs) Splice Drawer (2-48 position) FM000237 24 ASF (dup) adapters (8 Three Packs) Splice Drawer (2-48 position) FM000238 48 MTRJ adapters (8 Six Packs) Splice Drawer (2-48 position) FM000239 CNS096HD—6U HIGH DENSITY PATCH & SPLICE PANELS—LGX118 96 UST adapters (8 Twelve Packs) Splice Drawer 2-48 position) FM000240 96 PST adapters (8 Twelve Packs) Splice Drawer (2-48 position) FM000241 48 UDL (dup) adapters (8 Six Packs) Splice Drawer (2-48 position) C211594 48 PSF (dup) adapters (8 Six Packs) Splice Drawer (2-48 position) C211558 48 PDL (dup) adapters (8 Six Packs) Splice Drawer (2-48 position) C211601 48 USF (dup) adapters (8 Six Packs) Splice Drawer (2-48 position) FM000242 48 ASF (dup) adapters (8 Six Packs) Splice Drawer (2-48 position) FM000243

AFL NO. 911442-00-00

Connector/Adapter Key TYPE

DESCRIPTION

ASC ASF

SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM

PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

© 2002, AFL, all rights reserved. PP-2-00073, Revision 5, 5.27.15 Specifications are subject to change without notice.

168

LightLink LANSystem 7RU Fiber Patch and Splice Panel The AFL 7RU Fiber Patch and Splice Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 144 fibers is desired.The two panel design is based on a 7 rack unit height comprised of a 4RU Termination Patch Panel and a 3RU Optical Splice Shelf.The 4RU Termination Patch Panel includes a master plate that is provisioned with 12 LGX® 118 compatible mounting positions.The 3RU Optical Splice Shelf utilizes three STF-48 telescoping splice drawers. Standard 7RU Fiber Patch and Splice Panels are available empty for complete field configuration, half loaded with adapter plates and STF-48 telescoping splice trays, or loaded with pigtails, adapter plates and STF-48 telescoping splice trays. Features

Specifications • Designed around Telcordia GR-63NEBS • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 72-fiber • High density: up to 144-fiber • Fiber storage capacity—one meter per spliced fiber (3 mm jacket) • Uses three STF-48 telescoping splice drawers • Two panel package—4U patch and 4U splice • 12 LGX 118 mm positions ®

• Fits comfortably into new and existing interconnect, cross-connect, customer premise, and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • LGX-compatible master plate (118 mm) • Modular design • Compact and versatile method of organizing splicing and connectivity

• Provides maximum protection of optical components Applications • Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

Dimensions DEPTH (A) IN INCHES

WIDTH (B) IN INCHES

HEIGHT (C) IN INCHES

RACK UNITS

FIBER CAPACITY

11.00

17.00

12.25

7

72/144

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00074, Revision 6, 5.27.15 Specifications are subject to change without notice.

169

LightLink LANSystem 7RU Fiber Patch and Splice Panel Ordering Information Select the seven-digit AFL number, specify the color and choose the loading character desired.

AFL NO.

Color

Loading Charactor

C211624

B

L

W = White B = Black

Example: Order number for a panel Black in color, loaded with master plate, adapter plates, 48 USC adapters (8 Six packs), splice drawer (48 and up), pigtails with connectors, hardware, cable clamp.

E = Empty H = Half-loaded with adapters L = Loaded with adapters and pigtails

Empty - Includes master plate, mounting hardware, cable clamp. Unloaded - Includes master plate, adapter plates, adapters, splice drawer (48 & up), hardware, cable clamp. Loaded - I ncludes master plate, adapter plates, adapters, splice drawer (48 & up), pigtails with connectors, hardware, cable clamp.

Ordering Information CONFIGURATION AFL NO. CNS072P—7U PATCH & SPLICE PANELS (1 EA. 4U PATCH, 3U SPLICE)—LGX118 EMPTY C211615 72 USC (PB) adapters (12 Six Packs)Splice Drawers (3-48 position) C211624 72 PSC adapters (12 Six Packs)Splice Drawers (3-48 position) C211633 72 UST adapters (12 Six Packs) Splice Drawers (3-48 position) C211660 72 PST adapters (12 Six Packs)Splice Drawers (3-48 position) C211669 36 UDL (dup) adapters (12 Three Packs)Splice Drawers (3-48 position) FM000244 36 PDL (dup) adapters (12 Three Packs)Splice Drawers (3-48 position) FM000245 72 ASC adapters (12 Six Packs)Splice Drawers (3-48 position) C210958 72 UFC adapters (12 Six Packs)Splice Drawers (3-48 position) C210946 72 USC (ZR) adapters (12 Six Packs)Splice Drawers (3-48 position) C210953 72 AFC adapters (12 Six Packs) Splice Drawers (3-48 position) C210949 72 ULC adapters (12 Six Packs) Splice Drawers (3-48 position) C210964 36 PSF (dup) adapters (12 Three Packs)Splice Drawers (3-48 position) FM000246 36 USF (dup) adapters (12 Three Packs)Splice Drawers (3-48 position) FM000247 36 ASF (dup) adapters (12 Three Packs)Splice Drawers (3-48 position) FM000248 72 MTRJ adapters (12 Six Packs)Splice Drawers (3-48 position) FM000249

CONFIGURATION AFL NO. CNS144HD—7RU HIGH DENSITY PATCH PANELS (1 EA. 4U PATCH, 3U SPLICE)—LGX118 72 UDL (dup) adapters (12 Six Packs)Splice Drawers (3-48 position) C211673 72 PSF (dup) adapters (12 Six Packs)Splice Drawers (3-48 position) C211637 72 PDL (dup) adapters (12 Six Packs)Splice Drawers (3-48 position) C211684 72 USF (dup) adapters (12 Six Packs)Splice Drawers (3-48 position) FM000250 72 ASF (dup) adapters (12 Six Packs)Splice Drawers (3-48 position) FM000251 144 UST adapters (12 Twelve Packs)Splice Drawers (3-48 position) FM000252 144 PST adapters (12 Twelve Packs)Splice Drawers (3-48 position) FM000253 144 UFC adapters (12 Twelve Packs)Splice Drawers (3-48 position) FM000254 144 USC adapters (12 Twelve Packs)Splice Drawers (3-48 position) FM000255 144 ASC adapters (12 Twelve Packs)Splice Drawers (3-48 position) FM000256

Accessories DESCRIPTION STF-48 Telescoping Splice Drawer

AFL NO. 911442-00-00

Connector/Adapter Key

CNS096P—7U PATCH & SPLICE PANELS (1 EA. 4U PATCH, 3U SPLICE)—LGX118 EMPTY C210967 96 UST adapters (12 Eight Packs) Splice Drawers (2-48 position) C210971 96 UFC adapters (12 Eight Packs) Splice Drawers (2-48 position) C210976 96 AFC adapters (12 Eight Packs) Splice Drawers (2-48 position) C210982 96 USC (ZR) adapters (12 Eight Packs) Splice Drawers (2-48 position) C210985 96 ASC adapters (12 Eight Packs) Splice Drawers (2-48 position) C210989 96 MTRJ adapters (12 Eight Packs) Splice Drawers (2-48 position) FM000257

TYPE ASC ASF PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

DESCRIPTION SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

© 2002, AFL, all rights reserved. PP-2-00074, Revision 6, 5.27.15 Specifications are subject to change without notice.

170

LightLink LANSystem 8RU Fiber Patch and Splice Panel The AFL 8RU Fiber Patch and Splice Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 144 fibers is desired. The standard density, two panel design is based on an 8 rack unit height comprised of a 5RU Termination Patch Panel and a 3RU Optical Splice Shelf. The 5RU Termination Patch Panel includes a master plate that is provisioned with twelve LGX® 170 compatible mounting positions. The 3RU Optical Splice Shelf utilizes three STF-48 telescoping splice drawers. Standard 8RU Fiber Patch and Splice Panels are available empty for complete field configuration, half loaded with adapter plates and STF-48 telescoping splice trays, or loaded with pigtails, adapter plates and STF-48 telescoping splice trays. Features

Specifications • Designed around Telcordia GR-63NEBS • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility • Standard density: up to 144-fiber • Fiber storage capacity—one meter per spliced fiber (3 mm jacket) • Uses three STF-48 telescoping splice drawers • Two panel package Standard Density: 5U patch and 3U splice • 12 LGX 170 mm positions ®

• Fits comfortably into new and existing interconnect, cross-connect, customer premise, and co-location environments • Most common connector styles and types available • Compatible with industry standard equipment frames • LGX compatible master plate (170 mm) • Modular design • Compact and versatile method of organizing splicing and connectivity

• Provides maximum protection of optical components Applications • Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

Dimensions DEPTH (A) PANEL VERSION IN INCHES

WIDTH (B) IN INCHES

HEIGHT (C) IN INCHES

RACK UNITS

FIBER CAPACITY

Standard

17.00

14.00

8

144

11.00

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00076, Revision 5, 5.27.15 Specifications are subject to change without notice.

171

LightLink LANSystem 8RU Fiber Patch and Splice Panel Ordering Information Select the seven-digit AFL number, specify the color and choose the loading character desired.

AFL NO.

Color

Loading Charactor

C211705

B

L

W = White B = Black Example: Order number for a panel Black in color, loaded with, master plate, adapter plates, 144 USC adapters (12 Twelve packs), splice drawer (48 and up), pigtails with connectors, hardware, cable clamp.

E = Empty H = Half-loaded with adapters L = Loaded with adapters and pigtails

Empty - Includes master plate, mounting hardware, cable clamp. Unloaded - Includes master plate, adapter plates, adapters, splice drawer (48 & up), hardware, cable clamp. Loaded - Includes master plate, adapter plates, adapters, splice drawer (48 & up), pigtails with connectors, hardware, cable clamp.

Configuration Part Numbers

Accessories DESCRIPTION STF-48 Telescoping Splice Drawer

CONFIGURATION AFL NO. CNS144P—8U PATCH & SPLICE PANELS (1 EA. 4U PATCH, 3U SPLICE)—LGX170 EMPTY C211696 144 USC (PB) adapters (12 Twelve Packs) Splice Drawers (3-48 position) C211705 144 PSC adapters (12 Twelve Packs) Splice Drawers (3-48 position) C211714 144 UST adapters (12 Twelve Packs) Splice Drawers (3-48 position) C211741 144 PST adapters (12 Twelve Packs) Splice Drawers (3-48 position) C211750 72 UDL (dup) adapters (12 Six Packs) Splice Drawers (3-48 position) FM000258 72 PDL (dup) adapters (12 Six Packs) Splice Drawers (3-48 position) FM000259 144 ASC adapters (12 Twelve Packs) Splice Drawers (3-48 position) C211021 144 UFC adapters (12 Twelve Packs) Splice Drawers (3-48 position) C211007 144 USC (ZR) adapters (12 Twelve Packs) Splice Drawers (3-48 position) FM000260 72 PSF (dup) adapters (12 Six Packs) Splice Drawers (3-48 position) FM000261 72 USF (dup) adapters (12 Six Packs) Splice Drawers (3-48 position) FM000262 72 ASF (dup) adapters (12 Six Packs) Splice Drawers (3-48 position) FM000263 144 MTRJ adapters (12 Twelve Packs) Splice Drawers (3-48 position) FM000264

AFL NO. 911442-00-00

Connector/Adapter Key TYPE ASC ASF PSC PSF USC (PB) USC (ZR) USF PST UST AFC PFC UFC ADL PDL PLC UDL (ZR) UDL (PB) ULC

Notes: 1) All MM cable is 62.5 μm unless otherwise specified. 2) When ordering Empty Termination Patch/Splice Panel, accessories are available for field configuration.

DESCRIPTION SC—Angle Polish, Simplex, ZR sleeve, SM SC—Angle Polish, Duplex, ZR sleeve, SM SC—Physical Polish, Simplex, PB sleeve, MM SC—Physical Polish, Duplex, PB sleeve, MM SC—Ultra Polish, Simplex, PB sleeve, SM SC—Ultra Polish, Simplex, ZR sleeve, SM SC—Ultra Polish, Duplex, ZR sleeve, SM ST—Physical Polish, Simplex, PB sleeve, MM ST—Ultra Polish, Simplex, ZR sleeve, SM FC—Angle Polish, Simplex, ZR sleeve, SM FC—Physical Polish, Simplex, PB sleeve, MM FC—Ultra Polish, Simplex, ZR sleeve, SM LC—Angle Polish, Duplex, ZR sleeve, SM LC—Physical Polish, Duplex, PB sleeve, MM LC—Physical Polish, Simplex, PB sleeve, MM LC—Ultra Polish, Duplex, ZR sleeve, SM LC—Ultra Polish, Duplex, PB sleeve, SM LC—Ultra Polish, Simplex, ZR sleeve, SM

© 2002, AFL, all rights reserved. PP-2-00076, Revision 5, 5.27.15 Specifications are subject to change without notice.

172

LightLink LANSystem SPL3RU and SPL4RU—Optical Splice Shelf

SPL3RU

SPL4RU

Specifications • Designed around Telcordia® GR-63NEBS • Aluminum construction per ASTMB209 • Durable textured powder coat finish available in black or white • Universal 19/23" EIA/TIA rack compatibility

The LightLink LANSystem Optical Splice Shelf is designed to provide a convenient in-rack splicing and interconnection point for Outside Plant (OSP) cable entering a Central Office (CO), Controlled Environmental Vault (CEV), Headend (HE) or customer location. Units are available with three or six STF-48 Telescoping Splice Drawers. Each drawer is capable of handling up to 48 individual single-fused or up to 144 mass-fused fibers, with minimum bend radius routing and protection. Features

Applications

• Fits comfortably into new and existing interconnect, cross-connect, customer premise, and co-location environments • Compatible with industry standard equipment frames • For in-rack splicing of outside plant cable to connectorized pigtails or riser cable • Drawers handle up to 48 single-fused or 144 mass-fused fibers • Cable entry/exit grommet seals • Durable and scratch resistant power coated antique white finish • Hinged plexiglass front and rear door • Spring loaded latches

• Telecommunications closets • Data Centers • Customer Premise • LAN / WAN Networks • Central Offices / Headends • Hubs / Cabinets / Remote Terminals • FTTH / FTTB Networks

continued on next page

Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2002, AFL, all rights reserved. PP-2-00081, Revision 6, 4.6.15 Specifications are subject to change without notice.

173

LightLink LANSystem SPL3RU and SPL4RU—Optical Splice Shelf Dimensions

3

DEPTH (A) (INCHES) 11.00

WIDTH (B) (INCHES) 17.00

HEIGHT (C) RACK UNITS (INCHES) 5.25 3

6

11.00

17.00

7.00

MODEL

NO. OF TRAYS

SPL3RU SPL4RU

4

SPLICE CAPACITY

UNLOADED WEIGHT

MATERIAL GAUGE

144 single, 432 mass

8.4 lbs.

2.03 mm

288 single, 864 mass

9.0 lbs.

2.03 mm

Ordering Information DESCRIPTION

AFL NO.

SPL3RU White, 3RU Optical Splice Shelf—EMPTY

C211777 - W

Black, 3RU Optical Splice Shelf—EMPTY

C211777 - B

White, 3RU Optical Splice Shelf—with 3 telescoping splice drawers

C211781 - W

Black, 3RU Optical Splice Shelf—with 3 telescoping splice drawers

C211781 - B

SPL4RU White, 4RU Optical Splice Shelf—EMPTY

C211795 - W

Black, 4RU Optical Splice Shelf—EMPTY

C211795 - B

White, 4RU Optical Splice Shelf—with 6 telescoping splice drawers

C211799 - W

Black, 4RU Optical Splice Shelf—with 6 telescoping splice drawers

C211799 - B

Accessories DESCRIPTION

AFL NO.

STF-48 Telescoping Splice Drawer, up to 48 single fused or 144 mass fused splices

911442-00-00

1x8 Universal Core Tube Fiber Routing Kit

FC000008

1x6 Universal Ribbon or Loose Tube Fiber Routing Kit

FC000070

© 2002, AFL, all rights reserved. PP-2-00081, Revision 6, 4.6.15 Specifications are subject to change without notice.

174

Poli-MOD® Patch and Splice Module AFL's new Poli-MOD is an innovative patch and splice module, which offers an inventive and effective means to accommodate up to 24 fiber interconnections in an industry-standard, single-slot LGX®118 footprint. The new Poli-MOD offers a unique and robust way to secure cable without the need for time-wasting, tie-wrap alternatives. Additionally, the module leverages a creative snap-in splice sleeve cradle to securely manage both single and ribbon fiber arrangements. These features provide the capacity to outfit a standard 4RU rack-mount panel with up to 288-fiber interconnections. 12-Fiber SC/UPC Configuration

The Poli-MOD is also offered in an arrangement that supports the low loss budget requirements of Distributed Antenna System (DAS) networks. This is accomplished through the elimination of an interconnection point while providing a robust splicing environment for rack and wall-mount panel applications. Features • 24-fiber interconnection capacity • LGX 118 compatibility (single-slot module) • Effective and time-saving cable mounting mechanism (no tie-wraps necessary) • Inventive splice sleeve cradle • Available in SC, LC, ST and FC connector arrangements • Organized fiber routing • Fixed solution, no moving parts • Multi-directional cable entry access • DIN rail mountable (with DIN Mount Kit) Applications

DAS Poli-MOD

• Telecommunications Closets • Data Centers • Customer Premise • Local Area Networks • Wide Area Networks • Central Offices • Hub Sites • Cabinets • Remote Terminals • Distributed Antenna Systems (DAS)

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2013, AFL, all rights reserved. PP-2-00089, Revision 3, 5.18.15 Specifications are subject to change without notice.

175

Poli-MOD® Patch and Splice Module Ordering Information Example: PM-L-12-ASC-0-S-01

PM

L

12

Configuration

Fiber/Connector Count

E = Empty (Splicing Only) H = Half Loaded (Adapter Plate only) L = Loaded (Adapter Plate & Pigtails) D = DAS Poli-MOD1

06 = 6 Fibers/Connectors 12 = 12 Fibers/Connectors 24 = 24 Fibers/Connectors2 XX = Empty

1. DAS Poli-MOD requires specialty packaging and is packaged as "1 Poli-MOD per box" ONLY. 2. 24 Fibers/Connectors are only available in a LC Duplex configuration. 3. Angle and Ultra-Polished connector types are only available with single-mode fiber configurations.

ASC Connector Type3

S

Fiber Type

ASC = Angle-Polished SC USC = Ultra-Polished SC PSC = Multimode SC ALC = Angle-Polished LC ULC = Ultra-Polished LC PLC = Multimode LC UST = Ultra-Polished ST PST = Multimode ST AFC = Angle-Polished FC UFC = Ultra-Polished FC PFC = Multimode FC XXX = Empty

Fiber Arrangement

0 = Single-mode (G.657.A1 BIF) 1 = 62.5 μm (OM1) 2 = 50 μm (OM2) 3 = 50 μm (OM3)

01 Packaging

S = Single/Standard

01 = 1 Poli-MOD per box*

R = Ribbon

06 = 6 Poli-MODs per box

3 = 3 mm, 3 meter DAS X = No Fiber (Half Loaded or Empty)

12 = 12 Poli-MODs per box

4 = 50 μm (OM4) X = Empty

Poli-MOD Kits/Accessories

Connector Color Codes CONNECTOR APC (Angled Polish Connector) UPC (Ultra Polish Connector) PC-OM1 PC-OM2 PC-OM3 / PC-OM4

0

DESCRIPTION Poli-MOD Cable Mounting Clip Kit Poli-MOD Spiral Wrap Kit Fusion Splice Sleeve, FP-03, 40 mm Adapter Bracket for Mounting Single Poli-MOD Corning CCH and PCH 145 mm Adapter Bracket DIN Mount Kit, LGX® 118

COLOR Green Blue Beige Black Aqua

AFL NO. FM003053 FM003280 S000206 FM000948-B FM001636 FM003394

Dimensions 1.14 in. (29 mm)

6.07 in. (154 mm)

5.12 in. (130 mm)

4.14 in. (105 mm)

© 2013, AFL, all rights reserved. PP-2-00089, Revision 3, 5.18.15 Specifications are subject to change without notice.

176

Xpress Fiber Management® (XFM) MPO Optical Cassettes AFL’s Xpress Fiber Management Optical Cassette product line is a family of preterminated fanout modules that streamline the deployment of optical network infrastructure. The primary function of these products is to break out multi-fiber ribbon connectors to simplex or duplex style connectors for connection to adjacent network elements. The Xpress Fiber Management Optical Cassette solution features low-loss MPO style trunk cable assemblies. These cassettes are available in the industry standard LGX® footprint as well as a selection of Corning Cable Systems™ footprints to support embedded base installations. All modules feature a durable powder coat finish, and are compatible with all 1U-4U LANSystem platforms. All modules are clearly labeled with a silk-screened "A" and "B" positioning reference to ensure proper polarity is maintained in the network, referenced to the polarity convention being deployed. Applications

Features

• Data centers • LAN, WAN and SAN • Interoffice cross-connects • Campus environments

• 12- and 24- port configurations • ANSI/TIA/EIA-568-B.3 compliant • Single-slot LGX packages • Compatible with LANSystem and WME hardware

• Available in black with rear MPO connection(s) • SMF, 62.5 µm MMF and 50 µm MMF supported • SC- and LC-MPO standard configurations • ST- and FC-MPO configurations available on special order

Optical Performance Data Single-mode Fiber (OS1)

PARAMETER Max IL (dB) Typical IL (dB) Reflectance (dB)

LC - MPO 1.15 0.6 -55

LCAPC - MPO 1.15 0.6 -65

Notes: 1. Single-mode IL test wavelengths 1310 nm and 155 0nm 2. Multimode IL test wavelengths 850 nm and 1300 nm 3. Single-mode RL test wavelengths 1310 nm and 1550 nm 4. Multimode RL test wavelengths 850 nm and 1300 nm

SC - MPO 1.3 0.6 -55

SCAPC - MPO 1.3 0.6 -65

ST - MPO 1.3 0.6 -55

Multimode Fiber (OM1, OM2 and 50 µm Laser Optimized) LC - MPO SC - MPO ST - MPO 1.15 1.3 1.3 0.6 0.6 0.6 -30 -30 -30

Technical Specifications: 1. ANSI/TIA/EIA-568-B.3 2. Telcordia® GR-326-CORE compliant single fiber connectors 3. Telcordia GR-1435-CORE compliant multi-fiber connectors

Ordering Information SINGLE-MODE FIBER COUNT, CONNECTOR OPTION 12F, LC 24F, LC 12F, SC 12F, ST

UPC - MPO (MALE, APC)

APC - MPO (Male, APC)

FM000090-B FM000691-B FM000087-B FM000093-B

FM001477-B FM001653-B FM001465-B N/A

MULTIMODE 50 µm LOMMF OM4 62.5 µm OM1 PC - MPO PC - MPO (Male, PC) (Male, PC) FM000273-B FM000092-B FM000692-B FM000663-B FM000272-B FM000089-B FM000274-B FM000095-B

LGX is a registered trademark of Furukawa Electric North America, Inc. Telcordia is a registered trademark of Telcordia Technologies, Inc.

© 2003, AFL, all rights reserved. PP-2-00117, Revision 5, 6.4.14 Specifications are subject to change without notice.

177

Xpress Fiber Management® (XFM) MPO Optical Cassettes Ordering Information – Accessories DESCRIPTION 145 mm Adapter Bracket

AFL NO. FM001636

NOTE: Allows standard LGX modules, such as AFL’s Poli-Mod Interconnect Module and the XFM Optical Cassette, to be mounted into existing Corning Cable Systems™ CCH series and PCH series racks and wall mount products.

Dimensions 128.0

104.6

28.9

130.0

ADAPTERS SHOWN FOR REFERENCE ONLY

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2003, AFL, all rights reserved. PP-2-00117, Revision 5, 6.4.14 Specifications are subject to change without notice.

178

Xpress Fiber Management® High Density Products (XFM®-HD)

XFM-HD 1RU front view

XFM-HD 2RU front view with trays pulled out

The XFM-HD family of products is designed to offer intuitive fiber management and unmatched fiber port accessibility in both the front and rear of the panel to extreme density applications in an optical interconnect environment. Readily supporting the management of densities up to 576 fibers in a traditional 4 rack-unit (4RU) space, the XFM-HD solution easily matches the highest port densities available in the market. The completely modular solution features low-loss MPO style trunk cable assemblies, Optical Fan-out cassettes with integrated fiber management and Uniboot 2.0 mm LC jumper assemblies. This combination of products cohesively equates to efficient moves, adds and changes and more accurate cost budgeting as there are no other products or accessories required to complete or modify an installation. A unique Uniboot LC connector allows for reversal of polarity in the field without requiring the use of any tools, easing assimilation into existing installations. Microcore trunk cables offer operators a reduced cable diameter which eases congestion in busy raceways, and feature an innovative protective pulling eye solution designed to add efficiency and security to moving the trunks through densely-packed ducts and conduits. Components •• Cassettes •• Panels •• Trunk cable assemblies •• Patch cord assemblies

XFM-HD 4RU rear view

Features •• Self contained fiber management •• Low loss MPO connectors •• High Density: 1RU/144F, 2RU/288F and 4RU/576F •• Uniboot LC assemblies with field-reversable polarity •• Reduced O.D. Microcore Trunk cable assemblies with enhanced pulling eye option •• Unsurpassed port density •• Simplified front and rear port access by design

XFM-HD Optical Cassette

© 2010, AFL, all rights reserved. PP-2-00116, Revision 3, 1.12.12 Specifications are subject to change without notice.

179

Xpress Fiber Management® High Density (XFM®-HD) Patch Panels AFL's XFM-HD patch panels are available in 1RU, 2RU and 4RU sizes with fully-loaded densities of 144 fiber, 288 fiber and 576 fiber, respectively. Designed to support incremental growth or a full-scale deployment in a self-contained manner, the XFM-HD panels consist of the XFM High Density Optical Cassette as a building block, which ensures that both front-side and back-side cabling is secured, protected and well managed.

XFM-HD Patch Panels in Rack

Made in USA Features •• Self contained fiber management •• Low loss MPO connectors •• High Density: 1RU/144F, 2RU/288F and 4RU/576F •• Uniboot LC assemblies with field-reversable polarity •• Reduced O.D. Microcore Trunk cable assemblies with enhanced pulling eye option •• Unsurpassed port density •• Simplified front and rear port access by design

All panels are 19/23" rack mountable and constructed using a heavy gauge steel with a durable black powder coat finish for an extended service life. The front doors consist of optional locks, are removable without tools, and hinge on the bottom of the panel. The unique sliding rail system locks into a standard rack mounting position yet also allows the user to place the panel into a service position allowing simplified access to “behind-the-wall” components. In tandem with the sliding rail system, the rear door and rear half of the panel lid are joined. When the rear door is removed for service, the rear section of the lid is also removed, enabling unobstructed access from the rear of the panel all the way to the MPO connector interfaces on the module plane. The trunk cable management area (rear of the panel) features multiple tie-points and lances that are positioned to work well with a predefined trunk breakout length to securely manage slack sub-units while still allowing the modules to slide in/out for installation and service. The 4RU panel features a dual plane design which separates the back-side cabling into two separate 288 fiber groups to aid in installation and ease post-installation maintenance activities.

Ordering Information All cable clamps offered separately so that customers may choose the correct clamp for their application. DESCRIPTION

AFL NO.

XFM-HD Panel, 1RU, Empty, 12 Cassette / 144F Capacity, Black

XFM-HD-1U

XFM-HD Panel, 2RU, Empty, 24 Cassette / 288F Capacity, Black

XFM-HD-2U

XFM-HD Panel, 4RU, Empty, 48 Cassette / 576F Capacity, Black

XFM-HD-4U

Cable Clamps Part Number Color FM003342-TB Black FM003342-TW White FM003345-TB Black FM003345-TW White

FIBER PER CABLE TOTAL FIBER Number of Cables 1 1 2 2

Min 72 72 18 18

Max 144 144 144 144

Min 72 72 36 36

Max 144 144 288 288

Continued

© 2010, AFL, all rights reserved. PP-2-00113, Revision 4, 8.28.13 Specifications are subject to change without notice.

180

Xpress Fiber Management® High Density (XFM®-HD) Patch Panels (cont.)

XFM-HD 1RU

XFM-HD 1RU front

XFM-HD 1RU rear

XFM-HD 2RU

XFM-HD 2RU front

XFM-HD 2RU rear

XFM-HD 4RU

XFM-HD 4RU front

XFM-HD 4RU rear

Specifications PARAMETER

MODEL XFM-HD 1U

XFM-HD 2U

XFM-HD 4U

Rack Space Requirement

1 RU (1.75 in)

2 RU (3.50 in)

4 RU (7.00 in)

Managed Density

144F Front Side - 72 Micro-Dual 2F Assemblies Back Side - 12 x 12F trunk – 1 x 144F (any increment of 12F)

288F Front Side - 144 Micro-Dual 2F Assemblies Back Side - 24 x 12F trunk – 2 x 144F (any increment of 12F)

576F Front Side - 288 Dual-Link 2F Assemblies Back Side - 48 x 12F trunk – 4 x 144F (any increment of 12F)

Module Capacity

12 x 12 fiber

24 x 12 fiber

48 x 12 fiber

Dimensions* (HxWxD)

1.72 x 16.25 x 18.66 in

3.47 x 16.25 x 18.66 in

6.97 x 16.25 x 18.66 in

Shipping Dimensions (HxWxD)

24.5 x 21 x 5 in

24.5 x 21 x 6.8 in

24.5 x 21 x 10.3 in

Weight

18 lbs.

21 lbs.

34 lbs.

Color

Black

Black

Black

Material

Metal Components: 16 GA Steel per ASTM A366 Plastic Components: UL 94 V0 rated PBT

Metal Components: 16 GA Steel per ASTM A366 Plastic Components: UL 94 V0 rated PBT

Metal Components: 16 GA Steel per ASTM A366 Plastic Components: UL 94 V0 rated PBT

* Not including mounting ears © 2010, AFL, all rights reserved. PP-2-00113, Revision 4, 8.28.13 Specifications are subject to change without notice.

181

Xpress Fiber Management® High Density (XFM®-HD) Optical Cassettes

XFM-HD LC Module

AFL’s XFM-HD Optical Cassettes are the building-blocks of the XFM-HD system. Optical Cassettes can be installed into all three XFM-HD panels from the front or rear and mount independently on an integral card guide rail system. This mounting system features a mechanical stop at the position where the connector / adapter mating point extends beyond the leading edge of the patch panel, preventing inadvertent removal of the module from the front side once installed. A self-contained fiber manager is incorporated into each cassette ensuring that the exiting cables are well-managed and organized, regardless of fiber exit direction. The fiber manager is reversible in the field to support both an Alpha and Beta module position, depending on the polarity management practice being employed. Each cassette ships with a field-installable clip which links multiple cassettes together within a patch panel to form a shelf. This shelf slides inwards and outwards allowing access to each individual fiber connection while not disturbing any fiber connection in that shelf. These clips are field-removable at any time should the need arise to remove a module for service, to move a link, or to upgrade to a new fiber type.

XFM-HD MTP Module

Features •• Self contained fiber management •• Low loss MPO connectors

XFM-HD Optical Cassettes are designed to function exclusively within the XFM-HD product line, and are compatible with all patch panels in the line. Specifications PARAMETER

SINGLE-MODE FIBER (OS1) LC/UPC - MTP

MULTIMODE FIBER (OM4) LC/PC - MTP

Max IL

1.15 dB

1.15 dB

Typical IL

0.6 dB

0.6 dB

Reflectance

-55 dB

-30 dB

Shipping Dimensions

12 x 6 x 2 in.

12 x 6 x 2 in.

Weight

1.6 lbs.

1.6 lbs.

Ordering Information DESCRIPTION

AFL NO.

XFM-HD High Density Optical Cassette, 4 Position MPO

HDOC-MPO-4A

XFM-HD High Density Optical Cassette,12F Single-mode, LC/UPC - MPO Connectors

HDOC-SM-ULC

XFM-HD High Density Optical Cassette,12F 10G 50 µm MM, LC/PC - MPO Connector

HDOC-50-PLC

© 2010, AFL, all rights reserved. PP-2-00111, Revision 3, 1.12.12 Specifications are subject to change without notice.

182

Xpress Fiber Management® High Density (XFM®-HD) Trunk Cable Assemblies XFM-HD trunk cable assemblies consist of sub-unitized MicroCore® fiber optic cable in fiber counts ranging from 12-144. This reduced diameter, high performance cable is comprised of multiple 12-fiber sub-unit tubes, each containing twelve 250 µm colored fibers enclosed by a high performance PVC jacket. The reduced diameter offers the installer many advantages over traditional tight-buffered cable options – higher tolerance to bends during and after installation; requires less space in cable trays, raceways, ducts and conduits; and enables more efficient airflow in congested, high density cabling applications. Trunk cables are available in a variety of configurations to align with customer needs. High-precision MPO ferrules ensure that optical performance specifications are met without requiring components to be paired, offering customers the utmost in flexibility when consuming inventory or ordering new product. No transition is required on MPOterminated trunk cables due to cable design. An epoxy-filled, reduced OD transition piece is standard on trunk cables terminated with single-fiber connectors. MPO-terminated trunk cable ends have a single, predefined breakout length, regardless of fiber count, which functions in perfect harmony with any XFM-HD patch panel, eliminating guesswork and virtually guaranteeing a clean and well-organized installation.

Features •• Self contained fiber management •• Low loss MPO connectors •• Uniboot LC assemblies with field-reversable polarity •• Reduced O.D. Microcore Trunk cable assemblies with enhanced pulling eye option •• Unsurpassed port density Specifications

CONNECTOR

CONNECTOR ORDERING CODE

CONNECTOR HOUSING COLOR

BOOT COLOR

FIBER TYPE

CABLE JACKET COLOR

FLAME RATING

IL (TYPICAL dB)***

RL (TYPICAL dB)***

LC/UPC

UDL

Blue

White

Single-mode G.657.A1 (BIF)

Yellow

Plenum

0.15

-60

LC/PC

PDL

Beige

White

50 µm OM3, OM4

Aqua

Plenum

0.15

-35

Angled MTP (unpinned)

ATF

Green

Black

Single-mode G.657.A1 (BIF)

Yellow

Plenum

0.35

-65

Angled MTP (pinned)

ATM

Green

Black

Single-mode G.657.A1 (BIF)

Yellow

Plenum

0.35

-65

Angled MTP (unpinned), Low Loss

ETF

Green

Black

Single-mode G.657.A1 (BIF)

Yellow

Plenum

0.15

-65

Angled MTP (pinned), Low Loss

ETM

Green

Black

Single-mode G.657.A1 (BIF)

Yellow

Plenum

0.15

-65

MTP (unpinned), Low Loss

FTF

Aqua

Black

50 µm OM3, OM4

Aqua

Plenum

0.15

-30

MTP (pinned), Low Loss

FTM

Aqua

Black

50 µm OM3, OM4

Aqua

Plenum

0.15

-30

NOTES: Typical values based on equal quality connectors

Continued

© 2010, AFL, all rights reserved. PP-2-00114, Revision 3, 1.12.12 Specifications are subject to change without notice.

183

Xpress Fiber Management® High Density (XFM®-HD) Trunk Cable Assemblies (cont.) Ordering Information XFM-HD MTP Trunks CONNECTOR

MTP (No Pins) - MTP (No Pins)

FIBER COUNT

APC SM

APC SM - ELITE

PC MM 50 µm OM3

PC MM 50 µm OM4

12

XFM000057-XXXX

XFM000071-XXXX

XFM000085-XXXX

XFM000099-XXXX

24

XFM000058-XXXX

XFM000072-XXXX

XFM000086-XXXX

XFM000100-XXXX

48

XFM000060-XXXX

XFM000074-XXXX

XFM000088-XXXX

XFM000102-XXXX

72

XFM000061-XXXX

XFM000075-XXXX

XFM000089-XXXX

XFM000103-XXXX

96

XFM000062-XXXX

XFM000076-XXXX

XFM000090-XXXX

XFM000104-XXXX

144

XFM000063-XXXX

XFM000077-XXXX

XFM000091-XXXX

XFM000105-XXXX

XXXX = length in meters and XXXXFT = length in feet

XFM-HD MTP Extender Trunks CONNECTOR

MTP (No Pins) - MTP (Pins)

FIBER COUNT

APC SM

APC SM - ELITE

PC MM 50 µm OM3

PC MM 50 µm OM4

12

XFM000064-XXXX

XFM000078-XXXX

XFM000092-XXXX

XFM000106-XXXX

24

XFM000065-XXXX

XFM000079-XXXX

XFM000093-XXXX

XFM000107-XXXX

48

XFM000067-XXXX

XFM000081-XXXX

XFM000095-XXXX

XFM000109-XXXX

72

XFM000068-XXXX

XFM000082-XXXX

XFM000096-XXXX

XFM000110-XXXX

96

XFM000069-XXXX

XFM000083-XXXX

XFM000097-XXXX

XFM000111-XXXX

144

XFM000070-XXXX

XFM000084-XXXX

XFM000098-XXXX

XFM000112-XXXX

XXXX = length in meters and XXXXFT = length in feet XXXX = length in meters and XXXXFT = length in feet

© 2010, AFL, all rights reserved. PP-2-00114, Revision 3, 1.12.12 Specifications are subject to change without notice.

184

Xpress Fiber Management® High Density (XFM®-HD) Patch Cord Assemblies XFM-HD patch cords are assembled with AFL’s Micro-Dual (2-fiber) cable and are terminated with a unique, field-reversible LC Uniboot connector. This round cable design coupled with the Uniboot LC connector minimizes the front-side cabling footprint and reduces the impact on airflow up and down the rack, and between racks. A 2.0 mm and 2.4 mm OD option is available, enabling both 250 µm and 900 µm fiber coating options within the cable. Riser- and plenum-rated jackets are available and all major fiber types are supported. In addition to being field-reversible, the Uniboot LC connector also supports both the SFP and Mini-SFP transceiver footprints. Virtually all polarity management methods and active component connections are supported, enabling the end user to utilize a single product across new, existing and acquired network installations. Features •• Self contained fiber management •• Low loss MPO connectors •• Uniboot LC assemblies with field-reversable polarity •• Reduced O.D. Microcore Trunk cable assemblies with enhanced pulling eye option •• Unsurpassed port density Specifications

FIBER TYPE

CABLE JACKET COLOR

FLAME RATING

IL

RL

White

Single-mode G.657.A1 (BIF)

Yellow

Plenum

0.3 dB

>55 dB

White

50 µm OM3, OM4

Aqua

Plenum

0.5 dB

>30 dB

CONNECTOR

CONNECTOR ORDERING CODE

CONNECTOR HOUSING COLOR

BOOT COLOR

LC/UPC

ULU¹

Blue

LC/PC

PLU²

Beige

1 - Single-mode only 2 - Multimode only

Ordering Information MTP-LC Fanouts CONNECTOR

FIBER COUNT

APC SM

PC MM 50 µm OM3

PC MM 50 µm OM4

MTP (Pins) - LC Duplex

12

CS009521-XXXX

CS011510-XXXX

CS009519-XXXX

XXXX = length in meters and XXXXFT = length in feet

LC Uniboot Assemblies CONNECTOR

FIBER COUNT

UPC SM

PC MM 50 µm OM3

PC MM 50 µm OM4

LC Uniboot - LC Uniboot Assembly, 2.0 mm Plenum

2

CS011378-XXXX

CS010640-XXXX

CS011386-XXXX

LC Uniboot - LC Uniboot Assembly, 2.4 mm Plenum

2

CS011389-XXXX

CS011397-XXXX

CS011400-XXXX

XXXX = length in meters and XXXXFT = length in feet

© 2010, AFL, all rights reserved. PP-2-00112, Revision 3, 1.12.12 Specifications are subject to change without notice.

185

Xpress Fiber Management® (XFM) 1RU Patch Panel The Xpress Fiber Management (XFM) 1U patch panel is a rack mountable interconnect point specifically designed to manage dense fiber applications. Based on the LGX® intermateability platform, the panel is fully compatible with AFL’s XFM Optical Cassette, Passive Optical Coupler Modules, and Poli-MOD® solutions. This panel offers enhanced management of densities up to 72 fibers using MTP-LC XFM Optical Cassettes (24 fibers). Features

Applications

•• Steel construction •• Textured black powder coat finish •• Universal WECO/TIA 19"/23" rack compatibility •• (3) LGX 118 adapter plate / module mounting positions •• Slide-out tray with relief cut-outs for simplified connector access •• Optional front door key lock for heightened protection of internal components

•• Data Centers •• Enterprise Networks •• Telecommunications Closets •• Central Offices / Headends

Specifications DEPTH (A) (inches)

WIDTH (B) (inches)

HEIGHT (C) (inches)

RACK UNITS

CAPACITY

UNLOADED WEIGHT

15.5

17

1.7

1

(3) LGX 118

13 lbs.

Ordering Information All cable clamps offered separately so that customers may choose the correct clamp for their application. DESCRIPTION Xpress Fiber Management 1U Patch Panel, Black, Empty

MODEL NUMBER XFM-1-U-B-0

AFL NO. FM002711-BE

Accessories DESCRIPTION Kit, Lock, for CON/CNS Panels

AFL NO. FM001318

Made in USA LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2008, AFL, all rights reserved. PP-2-00164, Revision 1, 11.14.12 Specifications are subject to change without notice.

186

Xpress Fiber Management® (XFM) 2RU Patch Panel The Xpress Fiber Management (XFM) 2U patch panel is a rack mountable interconnect point specifically designed to manage dense fiber applications. Based on the LGX® intermateability platform, the panel is fully compatible with AFL’s XFM Optical Cassette, Passive Optical Coupler Modules, and Poli-MOD® solutions. This panel offers enhanced management of densities up to 144 fibers using MTP-LC XFM Optical Cassettes (24 fibers). Features

Applications

•• Steel construction •• Textured black powder coat finish •• Universal WECO/TIA 19"/23" rack compatibility •• (6) LGX 118 adapter plate / module mounting positions •• Slide-out tray with relief cut-outs for simplified connector access •• Optional front door key lock for heightened protection of internal components

•• Data Centers •• Enterprise Networks •• Telecommunications Closets •• Central Offices / Headends

Specifications DEPTH (A) IN INCHES

WIDTH (B) IN INCHES

HEIGHT (C) IN INCHES

RACK UNITS

CAPACITY

UNLOADED WEIGHT

15.5

17

3.5

2

(6) LGX 118

15 lbs.

Ordering Information All cable clamps offered separately so that customers may choose the correct clamp for their application. DESCRIPTION Xpress Fiber Management 2U Patch Panel, Black, Empty

MODEL NUMBER XFM-2-U-B-0

AFL NO. FM002712-BE

Accessories DESCRIPTION Kit, Lock, for CON/CNS Panels

AFL NO. FM001318

Made in USA LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2008, AFL, all rights reserved. PP-2-00165, Revision 0, 1.26.11 Specifications are subject to change without notice.

187

Xpress Fiber Management® (XFM®) 4RU Patch Panel The Xpress Fiber Management (XFM) 4RU patch panel is a rack mountable interconnect point specifically designed to manage dense fiber applications. Based on the LGX® intermateability platform, the panel is fully compatible with AFL's XFM Optical Cassette, Poli-MOD® and WDM solutions, offering enhanced management of densities up to 288F using MTP/MPO, single fiber, or patch and splice methodologies. Routing rings on the top and bottom of the front panel provide enhanced cable routing allowing cable assemblies to exit comfortably. This panel can be provisioned with a key lock at the time of order for secure environments. Features

Applications

• Aluminum construction • Textured black powder coat finish • Universal WECO/TIA 19"/23" rack compatibility • (12) LGX 118 adapter plate / module mounting positions • Mounting depth adjustable from flush to 8" in 1" increments

• Data Centers • Enterprise Networks • Telecommunications Closets • Central Offices / Headends

Specifications DEPTH (A) IN INCHES 15.5

FRONT WIDTH (B) REAR WIDTH (C) HEIGHT (D) RACK IN INCHES IN INCHES IN INCHES UNITS CAPACITY 17 15 7 4 (12) LGX 118

UNLOADED WEIGHT 9 lbs.

Ordering Information

All cable clamps offered separately so that customers may choose the correct clamp for their application. DESCRIPTION Xpress Fiber Management 4U Patch Panel, Black, Empty Xpress Fiber Management 4U Patch Panel, Black, Empty, Key Lock

MODEL NO. XFM-4U-B-0 XFM-4U-B-K

AFL NO. FM001090-B FM001218-B

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2008, AFL, all rights reserved. PP-2-00115, Revision 3, 1.7.15 Specifications are subject to change without notice.

188

Wall Mount Interconnect Enclosure (WME) with Two LGX® Mounting Positions

WME-02

AFL’s wall mount interconnect enclosure (WME-02) provides a convenient convergence point for interconnecting and/or splicing in wall mount applications. Provisioned for up to two LGX compatible adapter plates or optical modules, the enclosure features a well-engineered solution for fiber and cable management on both the ingress and egress openings of the enclosure. Robust steel construction ensures the highest level of protection for sensitive components while integrated roll-formed hinges eliminate possible fiber pinch points while deploying or servicing components within. All WME series enclosures feature discrete access doors for provider and customer access which are independently lockable with a common pad-lock or tube-style keyed lock. Features

WME-02 shown empty

• Fits comfortably into new and existing interconnect, cross-connect and co-location environments • U-shaped cable entry eliminates the need to feed preconnectorized cables through an inconvenient access port • Modular design fully compatible with PoliMOD™ products and XFM optical cassettes • Dual doors with separate locking options for flexibility and security • Available empty, with adapters, or with adapters, splice trays and pigtails pre-installed • LGX 118 compatible • Optional splice tray and holder (ordered separately) • All major connector types are supported Applications

WME-02 shown fully loaded

• Co-Location sites • Customer premise • Hub/OTN sites • Telecommunication closets • Campus/enterprise environments Specifications • Solid steel construction • Powder coat black textured finish • Top or bottom cable entry with dust resistant grommets • Dual-hasp locking/security system • 12 to 24 fiber patch and splice density • Two LGX mounting positions • Physical dimensions: 12.0"H x 14.0"W x 2.5"D • Empty version weight: 10.65 lbs.

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2010, AFL, all rights reserved. PP-2-00107, Revision 2, 9.30.11 Specifications are subject to change without notice.

189

Wall Mount Interconnect Enclosure (WME) with Two LGX® Mounting Positions Ordering Information EMPTY DESCRIPTION WME02 Empty

Connector/Adapter Key TYPE ASC ASF PSC PSF

AFL NO. WME02E

HALF LOADED: WME WITH ADAPTER PLATES AND ADAPTERS ONLY AFL NO. CONNECTOR FIBER TYPE COUNT UPC SM (BLUE) APC SM (GREEN) SC 6 WME02AS-USCSM-006000 WME02AS-ASCSM-006000 12 WME02AS-USCSM-012000 WME02AS-ASCSM-012000 24 WME02AH-USFSM-024000 WME02AH-ASFSM-024000 LC 6 WME02AS-UDLSM-006000 WME02AS-ADLSM-006000 12 WME02AS-UDLSM-012000 WME02AS-ADLSM-012000 24 WME02AH-UDLSM-024000 WME02AH-ADLSM-024000 ST 6 WME02AS-USTSM-006000 — 12 WME02AS-USTSM-012000 — 24 WME02AH-USTSM-024000 — FC 6 WME02AS-UFCSM-006000 WME02AS-AFCSM-006000 12 WME02AS-UFCSM-012000 WME02AS-AFCSM-012000 24 WME02AH-UFCSM-024000 WME02AH-AFCSM-024000

PC MM (BEIGE) WME02AS-PSCM6-006000 WME02AS-PSCM6-012000 WME02AH-PSFM6-024000 WME02AS-PDLM6-006000 WME02AS-PDLM6-012000 WME02AH-PDLM6-024000 WME02AS-PSTM6-006000 WME02AS-PSTM6-012000 WME02AH-PSTM6-024000 WME02AS-PFCM5-006000 WME02AS-PFCM5-012000 WME02AH-PFCM5-024000

USC USF PST UST AFC PFC UFC ADL PDL PLC UDL ULC

DESCRIPTION Angle Polish SC (ZR) sleeve-SM Angle Polish SC Duplex (ZR) sleeve-SM Physical Polish SC (PB) sleeve-MM Physical Polish SC Duplex (PB) sleeveMM Ultra Polish SC with (ZR) sleeve-SM Ultra Polish SC Duplex (ZR) sleeve-SM Physical Polish ST (PB) sleeve-MM Ultra Polish ST (ZR) sleeve-SM Angle Polish FC (ZR) sleeve-SM Physical Polish FC (PB) sleeve-MM Ultra Polish FC (ZR) sleeve-SM Angle Polish LC Duplex (ZR) sleeve-SM Physical Polish LC Duplex (PB) sleeveMM Physical Polish LC (PB) sleeve-MM Ultra Polish LC Duplex (ZR) sleeve-SM Ultra Polish LC (ZR) sleeve-SM

LOADED: WME WITH ADPATER PLATES/ADAPTERS/SPLICE TRAYS/PIGTAIL (900 µm TIGHT BUFFERED FIBERS 3 METERS IN LENGTH) AFL NO. CONNECTOR FIBER TYPE COUNT UPC SM (BLUE) APC SM (GREEN) PC MM 62.5 µm (BEIGE) PC MM 50 µm (BLACK) SC 6 WME02FS-USCSM-006110 WME02FS-ASCSM-006110 WME02FS-PSCM6-006110 WME02FS-PSCM5-006110 12 WME02FS-USCSM-012110 WME02FS-ASCSM-012110 WME02FS-PSCM6-012110 WME02FS-PSCM5-012110 24 WME02FH-USFSM-024120 WME02FH-ASFSM-024120 WME02FH-PSFM6-024120 WME02FH-PSFM5-024120 LC 6 WME02FS-UDLSM-006110 WME02FS-ADLSM-006110 WME02FS-PDLM6-006110 WME02FS-PDLM5-006110 12 WME02FS-UDLSM-012110 WME02FS-ADLSM-012110 WME02FS-PDLM6-012110 WME02FS-PDLM5-012110 24 WME02FH-UDLSM-024120 WME02FH-ADLSM-024120 WME02FH-PDLM6-024120 WME02FH-PDLM5-024120 ST 6 WME02FS-USTSM-006110 — WME02FS-PSTM6-006110 WME02FS-PSTM5-006110 12 WME02FS-USTSM-012110 — WME02FS-PSTM6-012110 WME02FS-PSTM5-012110 24 WME02FH-USTSM-024120 — WME02FH-PSTM6-024120 WME02FH-PSTM5-024120 FC 6 WME02FS-UFCSM-006110 WME02FS-AFCSM-006110 WME02FS-PFCM6-006110 WME02FS-PFCM5-006110 12 WME02FS-UFCSM-012110 WME02FS-AFCSM-012110 WME02FS-PFCM6-012110 WME02FS-PFCM5-012110 24 WME02FH-UFCSM-024120 WME02FH-AFCSM-024120 WME02FH-PFCM6-024120 WME02FH-PFCM5-024120 ACCESSORIES DESCRIPTION Splice Tray Kit: Single Fusion 12F, 2RU, WME02, WME04, 1 Splice Tray Splice Tray Kit: Single Fusion 12F, 2RU, WME02, WME04, 2 Splice Trays

AFL NO. FM002827-1 FM002827-2

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2010, AFL, all rights reserved. PP-2-00107, Revision 2, 9.30.11 Specifications are subject to change without notice.

190

Wall Mount Interconnect Enclosure (WME) with Four LGX® Mounting Positions

WME-04

AFL’s wall mount interconnect enclosure (WME-04) provides a convenient convergence point for interconnecting and/or splicing in wall mount applications. Provisioned for up to four LGX compatible adapter plates or optical modules, the enclosure features a well-engineered solution for fiber and cable management on both the ingress and egress openings of the enclosure. Robust steel construction ensures the highest level of protection for sensitive components while integrated roll-formed hinges eliminate possible fiber pinch points while deploying or servicing components within. All WME series enclosures feature discrete access doors for provider and customer access which are independently lockable with a common pad-lock or tube-style keyed lock. Features

WME-04 shown empty

• Fits comfortably into new and existing interconnect, cross-connect and co-location environments • U-shaped cable entry eliminates the need to feed preconnectorized cables through an inconvenient access port • Modular design fully compatible with PoliMOD™ products and XFM optical cassettes • Dual doors with separate locking options for flexibility and security • Available empty, with adapters, or with adapters, splice trays and pigtails pre-installed • LGX 118 compatible • Optional splice tray and holder (ordered separately) • All major connector types are supported Applications

WME-04 shown fully loaded

• Co-Location sites • Customer premise • Hub/OTN sites • Telecommunication closets • Campus/enterprise environments Specifications • Solid steel construction • Powder coat black textured finish • Top or bottom cable entry with dust resistant grommets • Dual-hasp locking/security system • 24 to 48 fiber patch and splice density • Four LGX mounting positions • Physical dimensions: 12.0"H x 16.0"W x 3.63"D

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2010, AFL, all rights reserved. PP-2-00108, Revision 1, 5.24.11 Specifications are subject to change without notice.

191

Wall Mount Interconnect Enclosure (WME) with Four LGX® Mounting Positions Ordering Information EMPTY DESCRIPTION WME04 Empty

Connector/Adapter Key TYPE ASC ASF PSC PSF

AFL NO. WME04E

HALF LOADED: WME WITH ADAPTER PLATES AND ADAPTERS ONLY AFL NO. CONNECTOR FIBER TYPE COUNT UPC SM (BLUE) APC SM (GREEN) SC 24 WME04AS-USCSM-024000 WME04AS-ASCSM-024000 48 WME04AH-USFSM-048000 WME04AH-ASFSM-048000 LC 24 WME04AS-UDLSM-024000 WME04AS-ADLSM-024000 48 WME04AH-UDLSM-048000 WME04AH-ADLSM-048000 ST 24 WME04AS-USTSM-024000 — 48 WME04AH-USTSM-048000 — FC 24 WME04AS-UFCSM-024000 WME04AS-AFCSM-024000 48 WME04AH-UFCSM-048000 WME04AH-AFCSM-048000

PC MM (BEIGE) WME04AS-PSCM6-024000 WME04AH-PSFM6-048000 WME04AS-PDLM6-024000 WME04AH-PDLM6-048000 WME04AS-PSTM6-024000 WME04AH-PSTM6-048000 WME04AS-PFCM5-024000 WME04AH-PFCM5-048000

USC USF PST UST AFC PFC UFC ADL PDL PLC UDL ULC

DESCRIPTION Angle Polish SC (ZR) sleeve-SM Angle Polish SC Duplex (ZR) sleeve-SM Physical Polish SC (PB) sleeve-MM Physical Polish SC Duplex (PB) sleeveMM Ultra Polish SC with (ZR) sleeve-SM Ultra Polish SC Duplex (ZR) sleeve-SM Physical Polish ST (PB) sleeve-MM Ultra Polish ST (ZR) sleeve-SM Angle Polish FC (ZR) sleeve-SM Physical Polish FC (PB) sleeve-MM Ultra Polish FC (ZR) sleeve-SM Angle Polish LC Duplex (ZR) sleeve-SM Physical Polish LC Duplex (PB) sleeveMM Physical Polish LC (PB) sleeve-MM Ultra Polish LC Duplex (ZR) sleeve-SM Ultra Polish LC (ZR) sleeve-SM

LOADED: WME WITH ADPATER PLATES/ADAPTERS/SPLICE TRAYS/PIGTAIL (900 µm TIGHT BUFFERED FIBERS 3 METERS IN LENGTH) AFL NO. CONNECTOR FIBER TYPE COUNT UPC SM (BLUE) APC SM (GREEN) PC MM 62.5 µm (BEIGE) PC MM 50 µm (BLACK) SC 24 WME04FS-USCSM-024120 WME04FS-ASCSM-024120 WME04FS-PSCM6-024120 WME04FS-PSCM5-024120 48 WME04FH-USFSM-048140 WME04FH-ASFSM-048140 WME04FH-PSFM6-048140 WME04FH-PSFM5-048140 LC 24 WME04FS-UDLSM-024120 WME04FS-ADLSM-024120 WME04FS-PDLM6-024120 WME04FS-PDLM5-024120 48 WME04FH-UDLSM-048140 WME04FH-ADLSM-048140 WME04FH-PDLM6-048140 WME04FH-PDLM5-048140 ST 24 WME04FS-USTSM-024120 — WME04FS-PSTM6-024120 WME04FS-PSTM5-024120 48 WME04FH-USTSM-048140 — WME04FH-PSTM6-048140 WME04FH-PSTM5-048140 FC 24 WME04FS-UFCSM-024120 WME04FS-AFCSM-024120 WME04FS-PFCM6-024120 WME04FS-PFCM5-024120 48 WME04FH-UFCSM-048140 WME04FH-AFCSM-048140 WME04FH-PFCM6-048140 WME04FH-PFCM5-048140

ACCESSORIES DESCRIPTION Splice Tray Kit: Single Fusion 12F, 2RU, WME02, WME04, 3 Splice Trays Splice Tray Kit: Single Fusion 12F, 2RU, WME02, WME04, 4 Splice Trays

AFL NO. FM002827-3 FM002827-4

LGX is a registered trademark of Furukawa Electric North America, Inc.

© 2010, AFL, all rights reserved. PP-2-00108, Revision 1, 5.24.11 Specifications are subject to change without notice.

192

SNI®-2900 Network Interface Device The SNI-2900 is designed to meet requirements for one to two line outdoor residential NIDs. This unit can be equipped with two individual line modules and two station protectors. Features •  Field upgradeable individual line modules •  Optional individual subscriber security covers •  Remote testing electronics and RFI filters •  Rugged, weatherproof thermoplastic alloy housing •  Grommeted entrances •  Designed and tested to Telcordia® GR-49-CORE •  Uses “S” footprint line modules • UL® Listed Specifications PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Cable Entrances Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance

VALUE Minimum of 100 MΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1 @ 0.88 in. Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to +140 (-40 to 60) 30 day cycling from +40 to +140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 inch flame test 30 Days at 100 °F and 95% RH, subject to: CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Dimensions (H x W x D) in. (cm)

3.5 x 5.75 x 2.19 (8.89 x 14.61 x 5.56)

Continued

© 2002, AFL, all rights reserved. PP-2-00022, Revision 2, 6.7.11 Specifications are subject to change without notice.

193

SNI®-2900 Network Interface Device Standard Configurations MODEL NO. SNI-2900 - 1- J - 1 - 1 - 90 - S S-Footprint adapter for K-Footprint Modules

AFL NO. DM000652 DM000717

Custom Order Matrix (consult customer service for availability) Basic Unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Lightning Protection

Telco Cover Fastener

SNI-2900

1

J

2

2

57

S

1 = Interface Module only

1 = 1 (Up to 2)

SNI-2900

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active) D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active)

37 = 125 57 = 356

2 = Half Ringer Equivalence

ONLY = Pin-In-Hex Security Screw (for use with KS-19192 tool)

90 = 455 N = NONE

4 = RFI Filter (Radio Frequency Interference)

EXAMPLE: SNI-2900 – 1 – J – 2 – 2 – 57 – S This model number indicates that the following has been ordered: SNI-2900 housing, supplied without individual subscriber security covers, line module includes; 4 screws, 2 wire RJ-11 interface with dual Green and Red screws, Half Ringer equivalence, two line capacity, 356 lightning protection and a Pin-In-Hex security screw for telco cover fastener.

© 2002, AFL, all rights reserved. PP-2-00022, Revision 2, 6.7.11 Specifications are subject to change without notice.

194

SNI®-730 Network Interface Device The SNI-730 is designed to meet requirements for one to three line outdoor residential NIDs. This unit can be equipped with three individual line modules and three station protectors. Features •  Compatible with Corning Cable Systems CAC®-7600 •  Replacement for Tyco RAYNID •  Field upgradeable individual line modules •  Optional individual subscriber security covers •  Remote testing electronics and RFI filters •  Rugged, weatherproof thermoplastic alloy housing •  Grommeted entrances •  Designed and tested to Telcordia® GR-49-CORE •  Uses “S” footprint line modules • UL® Listed Specifications PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance

VALUE Minimum of 100 MΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to +140 (-40 to 60) 30 day cycling from +40 to +140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 inch flame test 30 Days at 100 °F and 95% RH, subject to: CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Dimensions (H x W x D) in. (cm)

6.50 x 8.63 x 3.00 (16.51 x 21.92 x 7.62)

3/4" Pipe Fitting Transition Kit

Continued

"S" Footprint Adapter for "K" Footprint Line Modules CAC is a registered trademark of Corning Cable Systems Brands, Inc.

© 2002, AFL, all rights reserved. PP-2-00025, Revision 3, 8.1.12 Specifications are subject to change without notice.

195

SNI®-730 Network Interface Device Ordering Information – Standard Configurations MODEL NO. SNI - 730 - 1- J - 1 - 1 - 90 - H S-Footprint adapter for K-Footprint Modules 3/4" Pipe Fitting Transition KIt (includes 2)

AFL NO. DM000653 DM000717 DM001174

Custom Order Matrix (consult customer service for availability) Basic Unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Lightning Protection

Telco Cover Fastener

Optional Features

SNI-730

1

J

2

3

37

H

CLM-5C-1

1 = 1 (Up to 3)

37 = 125 57 = 356

SNI-730

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active) D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active)

1 = Interface Module only 2 = Half Ringer Equivalence

90 = 455

4 = RFI Filter (Radio Frequency Interference)

N = NONE

H = 3/8" Hex Head Screw

CLM-5C-1 = Single Line Coax Demarcation Module

S = Pin-In-Hex Security Screw (for use with KS-19192 tool)

EXAMPLE: SNI-730 – 1 – J – 2 – 3 – 37 – H – CLM-5C-1 This model number indicates that the following has been ordered: SNI-730 housing, supplied without individual subscriber security covers, line module includes; 4 screws, 2 wire RJ-11 interface, Half Ringer equivalence, three line capacity, 125EW lightning protection, 3/8" Hex Head screw for telco cover fastener, and an optional single line coax demarcation module.

© 2002, AFL, all rights reserved. PP-2-00025, Revision 3, 8.1.12 Specifications are subject to change without notice.

196

SNI®-760 Network Interface Device The SNI-760 is designed to meet requirements for one to six line outdoor residential NIDs. This unit can be equipped with six individual line modules and six station protectors. Features •  Compatible with Corning Cable Systems CAC®-7600 •  Replacement for Tyco RAYNID •  Field upgradeable individual line modules •  Optional individual subscriber security covers •  Remote testing electronics and RFI filters •  Rugged, weatherproof thermoplastic alloy housing •  Grommeted entrances •  Designed and tested to Telcordia® GR-49-CORE •  Uses “S” footprint line modules • UL® Listed Specifications PARAMETER Insulation Resistance

VALUE Minimum of 100 MΩ @ ± 200 V DC

Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance

100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to +140 (-40 to 60) 30 day cycling from +40 to +140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 inch flame test 30 Days at 100 °F and 95% RH, subject to: CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Dimensions (H x W x D) in. (cm)

10.00 x 8.37 x 3.00 (25.40 x 21.92 x 7.62)

3/4" Pipe Fitting Transition Kit

Continued

"S" Footprint Adapter for "K" Footprint Line Modules CAC is a registered trademark of Corning Cable Systems Brands, Inc.

© 2002, AFL, all rights reserved. PP-2-00026, Revision 3, 8.1.12 Specifications are subject to change without notice.

197

SNI®-760 Network Interface Device Ordering Information – Standard Configurations MODEL NO. SNI - 760 - 1 - J - 1 - 1 - 90 - H SNI - 760 - 1 - J - 1 - 1 - 57 - H SNI - 760 - 1 - J - 1 - 2 - 90 - H SNI - 760 - 1 - J - 1 - 6 - 90 - H S-Footprint adapter for K-Footprint Modules 3/4" Pipe Fitting Transition KIt (includes 2)

AFL NO. DM000654 DM000890 DM000877 DM000936 DM000717 DM001174

Custom Order Matrix (consult customer service for availability) Basic Unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Lightning Protection

Telco Cover Fastener

Optional Features

SNI-760

1

J

2

3

37

H

CLM-5C-1

1 = Interface Module only

1 = 1 (Up to 6)

SNI-760

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active) D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active)

2 = Half Ringer Equivalence

37 = 125 57 = 356 90 = 455

4 = RFI Filter (Radio Frequency Interference)

N = NONE

H = 3/8" Hex Head Screw

CLM-5C-1 = Single Line Coax Demarcation Module

S = Pin-In-Hex Security Screw (for use with KS-19192 tool)

EXAMPLE: SNI-760 – 1 – J – 2 – 3 – 37 – H – CLM-5C-1 This model number indicates that the following has been ordered: SNI-760 housing, supplied without individual subscriber security covers, line module includes; 4 screws, 2 wire RJ-11 interface, Half Ringer equivalence, three line capacity, 125EW lightning protection, 3/8" Hex Head screw for telco cover fastener, and an optional single line coax demarcation module.

© 2002, AFL, all rights reserved. PP-2-00026, Revision 3, 8.1.12 Specifications are subject to change without notice.

198

SNI®-760XL Network Interface Device The SNI-760 is designed to meet requirements for one to six line outdoor residential NIDs. This unit can be equipped with six individual line modules and six station protectors. Features •• Compatible with Corning Cable Systems CAC®-7600 •• Replacement for Tyco RAYNID® DATAGUARD 760XL •• Field upgradeable individual line modules •• Optional individual subscriber security covers •• Remote testing electronics and RFI filters •• Rugged, weatherproof thermoplastic alloy housing •• Grommeted entrances •• Designed and tested to Telcordia® GR-49-CORE •• UL® Listed •• Capable of holding 6 lines and additional bunching blocks plus more room for wire storage •• Versatile/movable inner plate for accommodating broadband wiring integration, retrofit installations Specifications

3/4" Pipe Fitting Transition Kit

PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance

VALUE Minimum of 100 MΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to +140 (-40 to 60) 30 day cycling from +40 to +140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 inch flame test 30 Days at 100 °F and 95% RH, subject to: CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Dimensions (H x W x D) in. (cm)

13.13 x 12.88 x 3.5 (33.35 x 32.72 x 8.89)

Continued "S" Footprint Adapter for "K" Footprint Line Modules CAC is a registered trademark of Corning Cable Systems Brands, Inc.

© 2002, AFL, all rights reserved. PP-2-00027, Revision 2, 8.1.12 Specifications are subject to change without notice.

199

SNI®-760XL Network Interface Device Ordering Information – Standard Configurations MODEL NO. SNI - 760XL - 1- J - 1 - 1 - 90 - H S-Footprint adapter for K-Footprint Modules available. 3/4" Pipe Fitting Transition KIt (includes 2)

AFL NO. DM000805 DM000717 DM001174

Custom Order Matrix (consult customer service for availability) Basic unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Lightning Protection

Telco Cover Fastener

Optional Features

SNI-760XL

1

J

2

3

37

H

CLM-5C-1

1 = Interface Module only

1 = 1 (Up to 6)

37 = 125 57 = 356

H = 3/8" Hex Head Screw

SNI-760XL

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active) D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active)

2 = Half Ringer Equivalence

90 = 455

4 = RFI Filter (Radio Frequency Interference)

N = NONE

CLM-5C-1 = Single Line Coax Demarcation Module

S = Pin-In-Hex Security Screw (for use with KS-19192 tool)

EXAMPLE: SNI-760XL – 1 – J – 2 – 3 – 37 – H – CLM-5C-1 This model number indicates that the following has been ordered: SNI-760XL housing, supplied without individual subscriber security covers, line module includes; 4 screws, 2 wire RJ-11 interface, Half Ringer equivalence, three line capacity, 125EW lightning protection, 3/8" Hex Head screw for telco cover fastener, and an optional single line coax demarcation module.

© 2002, AFL, all rights reserved. PP-2-00027, Revision 2, 8.1.12 Specifications are subject to change without notice.

200

SNI®-1100 Network Interface Device The SNI-1100 is the perfect solution for your one-line outdoor residential Network Interface Device (NID) needs. The unit is equipped with a single line modular jack for subscriber testing and is available, on a custom order basis, with a wide variety of lightning protection. In addition, a half-ringer equivalent circuit can installed in the SNI-1100. Features • Rugged, weatherproof thermoplastic alloy housing • Grommeted entrances • Designed and tested to Telcordia­® GR-49-CORE Specifications PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance 30 Days at 100 °F and 95% RH Subject to:

VALUE Minimum of 100 mΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to 140 (-40 to 60) 30 day cycling from 40 to 140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 flame test

Dimensions (H x W x D) in. (cm)

6.25 x 5.87 x 2.5 (20.32 x 21.92 x 7.62)

CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Continued

© 2002, AFL, all rights reserved. PP-2-00019, Revision 3, 12.2.13 Specifications are subject to change without notice.

201

SNI®-1100 Network Interface Device Standard Configurations MODEL NO. SNI 1100-1-57-H

AFL NO. 90156-04

Custom Order Matrix (consult customer service for availability) Basic Unit

Type of Electronics

Lightning Protection

Telco Cover Fastener

SNI-1100

2

57

S

37 = 125 57 = 356

H = 3/8" Hex Head Screw S = Pin-In-Hex Security Screw (for use with KS-19192 tool)

SNI-1100

1 = Interface only 2 = Half Ringer Equivalence

90 = 455 N = NONE

EXAMPLE: SNI-1100 – 2 – 57 – S This model number indicates that the following has been ordered: SNI®-1100 housing, supplied with Half Ringer equivalence, 356 lightning protection and Pin-in-Hex Security Screw for the telco cover fastener.

© 2002, AFL, all rights reserved. PP-2-00019, Revision 3, 12.2.13 Specifications are subject to change without notice.

202

SNI®-1600 Mounting Bracket The SNI-1600 Mounting Bracket provides a mounting location in MDU environments or anywhere locating a traditional Network Interface Device is difficult. The SNI-1600 is ideally designed for use with the SF-100 and SFB-100 Splitter/Filters in conjunction with delivery of IPTV video services. The SNI-1600 can also be used with any line module using the standard footprint. The SNI-1600 is suitable for indoor wall or hand box mounting or may be mounted outdoors in a suitable demarcation enclosure. Features • Small footprint for tight spaces • Accepts line module with standard footprint • High grade industrial polymer housing Specifications PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance 30 Days at 100 °F and 95% RH Subject to:

VALUE Minimum of 100 mΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 7 days at 158 (70) 30 day cycling from -40 to 140 (-40 to 60) 30 day cycling from 40 to 140 (4.44 to 60) with 95% RH 77 (25) 77 (25) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 flame test

Dimensions (H x W x D) in. (mm)

4.88 x 2.25 x 2.25 (123.95 x 57.15 x 57.15)

CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Continued

© 2002, AFL, all rights reserved. PP-2-00020, Revision 2, 6.7.11 Specifications are subject to change without notice.

203

SNI®-1600 Mounting Bracket

COCOT Applications

T he SNI-1600 is idealy suited for customer-owned coin-operated telephone services.

Custom Order Matrix (consult customer service for availability)

Basic Unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Lightning Protection*

Telco Cover Fastener

SNI-1600

1

BT

1

2

37

H

SNI-1600

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

A = 2 Screw, 2 Wire, RJ-11 interface

1 = Interface Module only

B = 4 Screw, 2 Wire, RJ-11 Interface (Green and Red electrically active)

2 = Half Ringer Equivalence

C = 6 screw, 2 wire, Bridging Module

4 = RFI Filter (Radio Frequency Interference)

D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active)

1 = 1 (Up to 2)

37 = 125 57 = 356 90 = 455 N = NONE

H = 3/8" Hex Head Screw S =

Pin-In-Hex Security Screw (for use with KS-19192 tool)

EXAMPLE: SNI-1600 – 1 – BT – 1 – 2 – 37 – H This model number indicates that the following has been ordered: SNI-1600 Mounting Bracket, supplied without individual subscriber security covers, line module includes; 4 screws, 2 wire RJ-11 interface and a sealed RJ-11 ETO “Jumping Jack”, one line capacity, 125EW style lightning protector, 3/8" Hex Head screw for telco cover fastener.

F = 2 screw, 8 position, 2 Wire Interface (Special Services) J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active)

* NOTE: Addition of lightning protection limits the number of line modules used to one.

T = Sealed RJ-11 ETO “Jumping Jack” (n/a with C, D or F termination above) N = None

© 2002, AFL, all rights reserved. PP-2-00020, Revision 2, 6.7.11 Specifications are subject to change without notice.

204

Terminal Access TA-230 Demarcation Enclosure AFL’s Terminal Access TA-230 provides two standard line module positions and a single pair wire terminal. Mounting hardware and terminal studs are included. The TA-230 can be used as an adjunct box when the network interface is fully loaded. The enclosure features grommeted openings and a provision for a security device. Features • Corrosion proof and environmentally protected • Pole or wall mountable • Secure hinged cover design • Grommeted cable entry/exit ports • Impact and chemical resistant engineered thermoplastic •  Uses “K” footprint line modules Specifications

TA-230

PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Cable Entrances Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance 30 Days at 100 °F and 95% RH Subject to:

VALUE Minimum of 100 mΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 0.5" input, 0.5" output 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to 140 (-40 to 60) 30 day cycling from 40 to 140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 flame test CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Dimensions (H x W x D) in. (cm)

3.13 x 3.63 x 2.5 (7.95 x 9.22 x 6.35)

Ordering Information DESCRIPTION Two line module positions, one pair terminal closure

MODEL NO. TA-230

AFL NO. DM000647

© 2002, AFL, all rights reserved. PP-2-00033, Revision 2, 6.7.11 Specifications are subject to change without notice.

205

SNI®-4300 Network Interface Device The SNI®-4300 is designed to meet requirements for one to three line outdoor residential NIDs. This unit can be equipped with three line modules and three solid state or gas tube protectors. A single or dual coax line module can be installed with up to two voice line modules, both of which have common ground connection capability. The coax line module allows handoff to the subscriber coax termination using standard “F” connectors. Features • Field upgradeable individual line modules • Optional individual subscriber security covers • Optional coax demarc line module • Remote testing electronics and RFI filters • Rugged, weatherproof thermoplastic alloy housing • Grommeted entrances • Designed and tested to Telcordia® GR-49-CORE •  Uses “K” footprint line modules Specifications

Grommeted Entrances

PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance

Dimensions (H x W x D) in. (cm)

VALUE Minimum of 100 MΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to +140 (-40 to 60) 30 day cycling from +40 to +140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 inch flame test 30 Days at 100 °F and 95% RH, subject to: CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630 6.25 x 8.00 x 3.00 (16.26 x 20.32 x 7.62)

Ordering Information - Standard Configurations MODEL NO. SNI-4300 - 1 - B - 1 - 2 - 37 - H SNI-4300 - 1 - B - 1 - 1 - 37 - H

AFL NO. 911049-00 911064-00

Continued

© 2002, AFL, all rights reserved. PP-2-00023, Revision 2, 6.7.11 Specifications are subject to change without notice.

206

SNI®-4300 Network Interface Device

Recessed Pockets/Rear Entry Port

Lock Staple/Telco Override

R ecessed pockets have been added below the subscriber line modules to tuck away electronic packages, keeping the main compartment uncongested. In addition, three optional grommeted entry ports have been added to the back of the unit, allowing I/W to pass directly from the home to the subscriber wiring bridge.

A view of both the telco and subscriber locking mechanisms. The subscriber can access the unit with a standard screwdriver and a stainless steel lock staple is provided for individual security. Telco override is provided and can be accessed with a standard 216 tool (security fastener option also available).

Custom Order Matrix (consult customer service for availability)

Basic Unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Lightning Protection

Telco Cover Fastener

Optional Features

SNI-4300

1

BT

2

2

37

H

CLM-5-1

A = 2 Screw, 2 Wire, RJ-11 interface B = 4 Screw, 2 Wire, RJ-11 Interface (Green and Red electrically active) C = 6 screw, 2 wire, Bridging Module D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active) F = 2 screw, 8 position, 2 Wire Interface (Special Services) J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active) T = Sealed RJ-11 ETO “Jumping Jack” (n/a with C, D or F termination above)

1 = Interface Module only 2 = Half Ringer Equivalence 4 = RFI Filter (Radio Frequency Interference)

37 = 125

H = 3/8" Hex Head Screw S = Pin-In-Hex Security Screw (for use with KS-19192 tool)

SNI-4300

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

1 = 1 (Up to 3)

57 = 356 90 = 455 N = NONE

CLM-5-1 = Single Line Coax Demarcation Module

EXAMPLE: SNI-4300 – 1 – BT – 2 – 2 – 37 – H – CLM-5-1 This model number indicates that the following has been ordered: SNI-4300 housing, supplied without individual subscriber security covers, line module includes; 4 screws, 2 wire RJ-11 interface and a sealed RJ-11 ETO “Jumping Jack”, Half Ringer equivalence, two line capacity, 125EW lightning protection, 3/8" Hex Head screw for telco cover fastener, optional single line coax demarcation module.

© 2002, AFL, all rights reserved. PP-2-00023, Revision 2, 6.7.11 Specifications are subject to change without notice.

207

SNI®-4600 Network Interface Device The SNI-4600 is designed to meet requirements for one to six line outdoor residential NIDs. This unit can be equipped with six AFL line modules and six solid state or gas tube protectors. A single or dual coax line module can be installed with up to five voice line modules, both of which have common ground connection capability. The coax line module allows handoff to the subscriber coax termination using standard “F” connectors. Features • Field upgradeable individual line modules • Optional individual subscriber security covers • Optional coax demarc line module • Remote testing electronics and RFI filters • Rugged, weatherproof thermoplastic alloy housing • Grommeted entrances • Designed and tested to Telcordia® GR-49-CORE •  Uses “K” footprint line modules Specifications PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance

VALUE Minimum of 100 MΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to +140 (-40 to 60) 30 day cycling from +40 to +140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 inch flame test 30 Days at 100 °F and 95% RH, subject to: CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Dimensions (H x W x D) in. (cm)

8.00 x 8.63 x 3.00 (20.32 x 21.92 x 7.62)

Grommeted Entrances

Continued

© 2002, AFL, all rights reserved. PP-2-00024, Revision 2, 6.7.11 Specifications are subject to change without notice.

208

SNI®-4600 Network Interface Device Lock Staple/Telco Override A view of both the telco and subscriber locking mechanisms. The subscriber can access the unit with a standard screwdriver and a stainless steel lock staple is provided for individual security. Telco override is provided and can be accessed with a standard 216 tool (security fastener option also available).

Standard Configurations MODEL NO. SNI-4600 - 1 - J - 1 - 1 - 90 - H SNI-4600 - 1 - B - 1 - 1 - 37 - H SNI-4600 - 1 - B - 1 - 2 - 37 - H SNI-4600 - 1 - B - 1 - 6 - 37 - H SNI-4600 - 1 - A - 1 - 1 - 37 - H - CLM - 5 - 1

AFL NO. DM000116 DM000002 911226-00-00 911142-00 912436-00-00

Custom Order Matrix (consult customer service for availability) Basic Unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Lightning Protection

Telco Cover Fastener

Optional Features

SNI-4600

1

BT

2

3

37

H

CLM-5-1

A = 2 Screw, 2 Wire, RJ-11 interface B = 4 Screw, 2 Wire, RJ-11 Interface (Green and Red electrically active) C = 6 screw, 2 wire, Bridging Module D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active) F = 2 screw, 8 position, 2 Wire Interface (Special Services) J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active) T = Sealed RJ-11 ETO “Jumping Jack” (n/a with C, D or F termination above)

1 = Interface Module only 2 = Half Ringer Equivalence 4 = RFI Filter (Radio Frequency Interference)

SNI-4600

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

1 = 1 (Up to 6)

37 = 125 57 = 356 90 = 455 N = NONE

H = 3/8" Hex Head Screw S = Pin-In-Hex Security Screw (for use with KS-19192 tool)

CLM-5-1 = Single Line Coax Demarcation Module

EXAMPLE: SNI-4600 – 1 – BT – 2 – 3 – 37 – H – CLM-5-1 This model number indicates that the following has been ordered: SNI-4600 housing, supplied without individual subscriber security covers, line module includes; 4 screws, 2 wire RJ-11 interface and a sealed RJ-11 ETO “Jumping Jack”, Half Ringer equivalence, three line capacity, 125EW lightning protection, 3/8" Hex Head screw for telco cover fastener, optional single line coax demarcation module.

© 2002, AFL, all rights reserved. PP-2-00024, Revision 2, 6.7.11 Specifications are subject to change without notice.

209

ML-6 Indoor Network Interface Device The ML-6 is a compact six-line Indoor Network Interface Device. The ML-6 incorporates the standard Line Module footprint. The ML-6 is decorative in styling, allowing it to be placed in the open rather than hidden inside a closet. The ML-6 features telco and subscriber grommeted cable ports, areas for recording subscriber phone numbers and operating instructions engraved into the covers of the unit. The ML-6 comes equipped with four grommeted ports in the subscriber compartment for convenient wire routing. Three grommeted ports are provided in the telco compartment as well. This feature allows the units to be stacked vertically, ideal for those occasions where space is limited. Features • One to six lines, field upgradeable • Utilizes Keptel patented standard line module footprint • Integral network wiring bridge with optional stub cable

• Stackable design • Side entry grommets for telco and subscriber wiring • Decorative contoured styling •  Uses “K” footprint line modules

Specifications

Three Line Configuration

Subscriber Compartment Grommets

PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Wire Installation Spacings Wiring Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance

Paint Intrusion Dimensions (H x W x D) in. (cm)

VALUE Minimum of 100 MΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 1" for drop wire, 1⁄4" for inside wire Network wire-24 AWG solid, plug cable wire-26 AWG stranded 20 in./lbs. 7 days at 158 (70) 30 day cycling from -40 to 120 (-40 to 48.88) 30 day cycling from 40 to 140 (4.44 to 60) with 95% RH 77 (25) 77 (25) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 inch flame test 30 Days at 100 °F and 95% RH, subject to: CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630 NID shall not be susceptible to paint intrusion 7 x 6 x 2.5 (17.78 x 15.24 x 6.35)

Continued

© 2002, AFL, all rights reserved. PP-2-00015, Revision 2, 6.7.11 Specifications are subject to change without notice.

210

ML-6 Indoor Network Interface Device Standard Configurations MODEL NO. ML-6 - 1 - B - 1 - 1 - H

AFL NO. 912047-00-00

Custom Order Matrix (consult customer service for availability) Basic Unit

Line Module Security

Subscriber Termination

Type of Electronics

Number of Lines Equipped

Telco Cover Fastener

ML-6

2

BT

1

6

H

1 = Interface Module only 2 = Half Ringer Equivalence 4 = RFI Filter (Radio Frequency Interference)

1 = 1 to 6

H = 3/8" Hex Head Screw S = Pin-In-Hex Security Screw (for use with KS-19192 tool)

ML-6

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

A = 2 Screw, 2 Wire, RJ-11 interface B = 4 Screw, 2 Wire, RJ-11 Interface (Green and Red electrically active) C = 6 screw, 2 wire, Bridging Module D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active) F = 2 screw, 8 position, 2 Wire Interface (Special Services)

EXAMPLE: ML-6 – 2– BT – 1 – 6 – H

J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active) T = Sealed RJ-11 ETO “Jumping Jack” (n/a with C, D or F termination above)

This model number indicates that the following has been ordered: ML-6 unit, supplied with individual subscriber security covers, 4 screws, 2-wire RJ-11 interface and a sealed RJ-11 ETO “Jumping Jack” interface circuit module (interface only), six line capacity, 3/8" hex head screw for telco cover fastener.

© 2002, AFL, all rights reserved. PP-2-00015, Revision 2, 6.7.11 Specifications are subject to change without notice.

211

Line Modules for Network Interface Devices The strength of the Network Interface Device (NID) product line lies in our versatile family of Line Interface Modules. The standard Line Interface Module footprint has been an integral part of the NID market for years with millions of NIDs deployed to date. Features • Field upgradeable • Standard line module footprint • Self-contained, simply press in place • Available with half ringers and RFI filters • Line modules used in: SNI®-4600, SNI-4300, SNI-4600XL, ML-6, SNI-1212, SNI-1600 and TA-230 • Optional individual subscriber security cover available • UL® Listed in Keptel® Network Interface Systems and Closures Specifications PARAMETER Contact Construction Contact Force Temperature Cycling with Humidity Sealed Line Module Immersion (Flooded Conditions)

VALUE 50 micro inches hard gold / 100 micro inches nickel plated phosphor bronze Minimum 100 grams 30 day cycling from 40° to 120°F (4.44° to 48.88°C) with 90% RH RJ-11 jack immersed in a solution of 1% weight sodium chloride (NaCl) and distilled deionized water, placed at a depth of 12 inches, or at a temperature of 77 °F for a period of three days. A bias of -48 V dc was applied between tip and ring of the jack during immersion

Coax Module Impedance Insertion Loss Return Loss “F” Connector Coax Cable RF Shielding

75 Ω < 0.12 dB maximum, 5 MHz-1 GHz < 21 dB minimum, 5 MHz-1 GHz Meets SCTE specification IPS-SP-400 Conforms to MIL-C-17/94F specification 100 dB, 5 MHz to 1 GHz, tested per MIS-20097D

Standard Configurations MODEL NO. Kit, Upgrade 1-B-1 / 125 Protector Kit, Upgrade 1-B-1 Kit, Bunch Block CLM-5 Coax Line Module Kit, Upgrade 1-J-1

AFL NO. DM000003 90829 911322-00-00 91979-01 DM000119

Continued >

© 2010, AFL, all rights reserved. PP-2-00010, Revision 2, 6.7.11 Specifications are subject to change without notice.

212

Line Modules for Network Interface Devices Typical Configurations

2-BT-1 Module (Sealed Module)

1-A-4 Module (RFI Filter Module)

2-B-1 Module (Security Cover)

1-D-1 Module (RJ-14 Module)

1-C-1 Module (Bunch Block)

CLM-5-1 Module (Coax Module) Consult customer service for ordering information.

Custom Order Matrix (consult customer service for availability) Line Module Security

Subscriber Termination

Type of Electronics

Lightning Protection

2

BT

1

37

1 = Without individual subscriber security covers 2 = With individual subscriber security covers

A = 2 Screw, 2 Wire, RJ-11 interface

1 = Interface Module only

37 =1 25

B = 4 Screw, 2 Wire, RJ-11 Interface (Green and Red electrically active)

2 = Half Ringer Equivalence

90 = 455

4 = RFI Filter (Radio Frequency Interference)

C = 6 screw, 2 wire, Bridging Module

57 = 356 N = NONE

D = 4 screw, 4 wire, RJ-14 Interface (Green, Yellow, Red and Black are electrically active) F = 2 screw, 8 position, 2 Wire Interface (Special Services) J = 4 Screw, 2 Wire, RJ-11 Interface (Dual Green and Red screws electrically active)

EXAMPLE: 2 – BT – 1 – 37 This model number indicates that the following has been ordered: A line module, supplied with an individual subscriber security cover, 4 screws, 2-wire RJ-11 interface and a sealed RJ-11 ETO “Jumping Jack” interface circuit module (interface only) and is supplied with a 125EW lightning protector.

T = Sealed RJ-11 ETO “Jumping Jack” (n/a with C, D or F termination above)

© 2010, AFL, all rights reserved. PP-2-00010, Revision 2, 6.7.11 Specifications are subject to change without notice.

213

IDC Line Modules for Network Interface Devices Gel-filled Insulation Displacement Connector (IDC) line modules build on AFL’s tradition of providing the most versatile selection of line modules. Based on the standard “K” footprint, IDC line modules provide the extra protection for connections in the most demanding conditions. 1-JC-1 Customer Bridge Module

Features • Field upgradeable • Standard “K” footprint for use in SNI®-4300, SNI-4600, SNI-4600XL, ML-6, and SNI-1600 • Adapter DM000484 available for “S” footprint, SNI-730, SNI-760, and SNI-2900 • Self contained; simply press in place • Available with half ringers and RFI filters • UL® listed for AFL systems and closures Specifications

1-CC-1 Bunch Block Module

PARAMETER Contact Construction Contact Force Temperature Cycling with Humidity Sealed Line Module Immersion (Flooded Conditions)

VALUE 50 micro inches hard gold / 100 micro inches nickel plated phosphor bronze Minimum 100 grams 30 day cycling from 40-120°F (4.44-48.88°C) with 90% RH RJ-11 jack immersed in a solution of 1% weight sodium chloride (NaCl) and distilled deionized water, placed at a depth of 12 inches, or at a temperature of 77 °F for a period of three days. A bias of -48 VDC was applied between tip and ring of the jack during immersion.

Standard Configurations “S” Footprint Adapter

MODEL NO. 1-JC-1, Customer Bridge Module 1-CC-1, Bunch Block Module Adapter for “S” footprint NIDs (SNI-730, SNI-760, SNI-760XL & SNI-2900) Adapter for PTD NIDSE

AFL NO. DM000594 DM000600 DM000484 DM000717

PTD Adapter

© 2010, AFL, all rights reserved. PP-2-00009, Revision 2, 6.7.11 Specifications are subject to change without notice.

214

LPF-200 Series ADSL POTS Splitters AFL’s line of ADSL NID POTS Splitter solutions meets most indoor and outdoor requirements for single-line applications. Packaged in the standard Line Module footprint, we have developed a solution that easily fits into most NIDs as a CPE device. The module occupies only one position within the NID and is housed in a plastic shell and encapsulated to provide an environmentally sealed product. All direct inside wiring connections to the module interface to colored, plastic coated washer screws. Specifications PARAMETER DC Loop Current (mA) DC Resistance (Ω) Insertion Loss (1004 Hz) Attenuation Distortion (Relative to Loss @ 1004 Hz) Delay Distortion Return Loss (Voice Band) Longitudinal Balance; Two Port Technique

CAC Line Module Adapter

Features • Single width line module footprint is space efficient • Environmentally sealed • Same splitter used with adjunct box applications reduces inventory • Installs in a variety of NIDs • Quick mounting capability in front of or behind existing indoor wall jacks without drilling mounting holes or replacing existing phone jack • Low voice band insertion loss and flat voice band attenuation distortion • Compatible with both CAP and DMT • Meets the ANSI T1.413 Annex E, ITU-T 992.1 Type 2 North American and Telcordia® requirements • UL® 1863 Listed

Tip-to-Ring Capacitance (POTS Port) ADSL Band Attenuation Input Impedance (ADSL Band Signal Path Loading) Operating Temperature °F (°C) LPF-200 LPF-200W, LPF-200F Relative Humidity (Non condensing) Fault Current Immunity Dimensions (H x W x D) in. (cm) LPF-200 TA-230 Weight lbs. (kg) LPF-200 TA-230

VALUE 0-10 < 19 0.5 dB maximum; 0.2 dB typical (ZTc @ 900, ZTr @ 600) ±0.2 dB; 200-3400 Hz (ZTc @ 900, ZTr @ 600) ±0.3 dB; 200-4000 Hz (ZTc @ 900, ZTr @ 600) < 85 mSec from 200-4000 Hz 13 dB ERL; 10 dB SRL-Low; 14 dB SRL-High > 80 dB; 200-2 kHz , 0-30 mA > 60 dB; 2-4 kHz , 0-30 mA < 100 nF; 20-30 Hz > 65 dB; 25-1104 kHz 0.1 dB from 30-1104 kHz -40 to 158 (-40 to 70) 32 to 158 (0 to 70) 0-95% Complies to GR-1089 levels I & II Surge and Power Cross 2.05 x 0.98 x 2.20 (5.21 x 2.49 x 5.59) 2.50 x 3.82 x 5.45 (6.35 x 9.70 x 13.84) 0.16 (0.07) 0.30 (0.14)

NOTE: In-line Micro Filter and Central Office POTS Splitters are available; Contact your sales representative for ordering information.

Ordering Information – Standard Configurations DESCRIPTION LPF-200 ADSL POTS Splitter TA-230 Adjunct Box w/ LPF-200 POTS Splitter CAC Line Module Adapter (100 per bag)

AFL NO. 911929-00-01 911986-00-02 911996-00-01

Continued

© 2002, AFL, all rights reserved. PP-2-00013, Revision 3, 4.9.14 Specifications are subject to change without notice.

215

LPF-200 Series ADSL POTS Splitters LPF-200 • For installation on the CPE side of NID - single width line module package • Flying leads permit universal connection to any style line module • Multiple home runs are terminated through four washer screw handoffs • Fits into SNI®-4300, SNI-4600, ML-6, TA™-230 and Siecor® CAC-7600 NIDs

TA-230 adjunct box • Weathertight enclosure used when no open positions are available in NID • Supports LPF-200 POTS Splitter Module and eliminates need to inventory unique Adjunct Box Splitter

• Wall or Pole mountable • Available empty or with the LPF-200 Module installed and terminated to screw bosses

© 2002, AFL, all rights reserved. PP-2-00013, Revision 3, 4.9.14 Specifications are subject to change without notice.

216

SNI®-2125 25-Pair Network Interface Device The SNI-2125 is a compact Network Interface Device (NID) designed for 25-pair indoor applications. Constructed of a thermoplastic alloy and the highest quality components, the SNI-2125 is designed to provide years of uninterrupted service. The SNI-2125 is provided with a male 50-pin connector for the network connection (66-type punchdown clips are optional) and press-fit wiring bridges featuring multi-washer screws on the subscriber side. The SNI-2125 can be stacked vertically for greater than 25-pair applications. The unit is available without the subscriber wiring bridges for use as a 50-pin to RJ-11 adapter or patch block. Specifications PARAMETER Construction Plugs and Jacks

Benefits • 25-pair network interface • Optional remote half ringer electronics • Rugged thermoplastic alloy housing • 50-pin connector or optional 66-type punchdown on network side • Multi-washer screws on subsciber side • Field replaceable wiring bridges • Stack units vertically

VALUE Precision injection-molded from rugged engineering thermoplastic 50 micro inches of hard gold over 100 micro inches of nickel-plated phosphor bronze Plastic head, stainless steel 1⁄4" hex-slotted multi-washer (brass) screws Wall or backboard via mounting feet 16.25" x 5.13" x 1.63"

Terminal Screws Mounting Dimensions (H x W x D)

Standard Configurations MODEL NO. SNI-2125

AFL NO. Consult customer service

Custom Order Matrix (consult customer service for availability) Basic Unit

Termination

Type of Electronics

SNI-2125

1

1

SNI-2125

1 = Male 50-Pin Connector on Network Side, Screw Terminals on Subscriber Side

1 = Interface Module only 2 = Half Ringer Equivalence

2H = 66 Clips on Network Side (3/8" Cover Fastener), Screw Terminals on Subscriber Side 2S = 66 Clips on Network Side (Security Cover Fastener), Screw Terminals on Subscriber Side 5 = Male 50-Pin Connector on Network Side, No wiring Bridge on Subscriber Side

EXAMPLE: SNI-2125 – 1 – 1 This model number indicates that the following has been ordered: SNI-2125 Multiline Network Interface Device, Male 50-pin connector on network side, screw terminals on subscriber side, Interface only.

© 2002, AFL, all rights reserved. PP-2-00021, Revision 2, 6.10.11 Specifications are subject to change without notice.

217

SNI®-8925 Multiline Network Interface Device The SNI®-8925 is a patented, ultra-compact, economical, Network Interface Device (NID) designed for 25-pair multiline applications. Twenty-five individual RJ-11 jacks provide the interface at the demarcation point as specified in FCC Part 68 requirements, allowing testing at the subscriber’s location for each individual feeder pair provided. This line testing feature could reduce T&M charges on maintenance calls, since the subscriber would now be able to test their own individual lines to determine which side of demarc the fault resides before calling for service. Benefits • Mounts anywhere a 66M block would • Compact 25-pair network interface • Optional remote half ringer test electronics • Rugged thermoplastic alloy housing • Telco termination: 50-pin or AT&T 710 connector on back • Subscriber termination: screw, IDC, 66-clip • Mounts to 89B or 89D bracket • Optional weatherable version for use in BET/NIDs • UL® listed and patented (No. 4,932,051)/Telcordia® tested • Integral I/W strain relief for each individual pair Specifications PARAMETER Construction Plugs and Jacks Terminal Screws Insulation Displacement Connectors (66 clip and Snap-lock IDC) Mounting

VALUE Precision injection-molded from rugged engineering thermoplastic 50 micro inches of hard gold over 100 micro inches of nickel-plated phosphor bronze Plastic head, stainless steel 1⁄4" hex-slotted multi-washer (brass) screws Tin plated over phosphor bronze Frame, wall or backboard using attached standard 89D or 89B brackets (order without mounting bracket if bracket exists)

25-Pair Rear Connector

Standard Configurations MODEL NO. SNI-8925 - 1 - 1 - 1 SNI-8925 - 7 - 1 - 2

AFL NO. 90365-02 91669-00

Continued

© 2002, AFL, all rights reserved. PP-2-00028, Revision 2, 6.10.11 Specifications are subject to change without notice.

218

SNI®-8925 Multiline Network Interface Device Multi-Washer Screws • Two screws with four washers each allow the termination of up to four wires per screw • Plastic 1⁄4" slotted hex heads prevent accidental casual contact from the subscriber • Optional weather resistant rubber boots cover RJ-11 jacks for outdoor applications Snap-Lock IDC Multi-Washer Screws

• Individual pairs can be terminated to the SNI-8925 without the use of hand tools • Swinging cover makes the connection when closed by pushing conductors into contacts • The Snap-Lock IDC is for indoor use only 66 Style Clip • Dual 66-clips allow termination of up to two wires per clip • Uses the same tool as traditional 66 style blocks • Recommended for quick cross-connect capability when used with 66 blocks • The 66 style clip is recommended for indoor use only

Snap-Lock IDC

MPOP demarcation system • Mounted on quick connect type racks • 300-2400 pair applications requiring demarcation located at minimum point of penetration • Anywhere floor and wall space are a premium • Preterminated stub cables on network side reduce installation time by as much as 50% • Each system 100% pretested to eliminate troubleshooting on the job site Custom Order Matrix (consult customer service for availability)

Snap-Lock IDC Basic Unit

Line Module Security

Type of Electronics

Attachments

SNI-8925

1

1

1

SNI-8925

1 = Male 50-Pin Connector, Network Side, Screw Terminals, Subscriber Side

1 = Interface Module only

1 = With 89D Mounting Bracket

2 = Half Ringer Equivalence

2 = Without Mounting Bracket Supplied

2 = Male 50-Pin Connector, Network Side, 66 Clips Subscriber Side 3 = Male 50-Pin Connector, Network Side, No Wiring Bridges, Subscriber Side

3 = With 89B Mounting Bracket

4 = N/A (Discontinued Option)

MPOP Rack

5 = Male 50-Pin Connector, Network Side, Snap-Lock IDC, Subscriber Side 6 = AT&T 710 Connector, Network Side, Screw Terminals, Subscriber Side 7 = AT&T 710 Connector, Network Side, Screw Terminals, Subscriber Side, Weather Resistant Rubber Boots Covering RJ-11 Jacks

EXAMPLE: SNI-8925 – 1– 1 – 1 This model number indicates that the following has been ordered: SNI-8925 Multiline Network Interface Device, Male 50-pin connector on network side, screw terminals on subscriber side, Interface only, with 89D mounting bracket.

© 2002, AFL, all rights reserved. PP-2-00028, Revision 2, 6.10.11 Specifications are subject to change without notice.

219

Terminal Access TA-1642 Terminal Enclosure AFL’s TA-1642 terminal enclosure is uniquely designed to withstand harsh environments, such as high moisture and coastal areas and meets all Telcordia requirements stipulated in GR-975 for sealing and GR-1195 for IDC Cross-connect and Terminal Blocks. The TA-1642 can be used in aerial, pole or wall mount applications and can be outfitted with heavy plated steel hangers designed to grip the support strand and prevent rotation. Internal punch-out holes allow for wall or pole mounting. Stainless steel lashing straps can be mounted through punch-outs for pole, post or piling mounting. The TA-1642 also features eight (8) individually grommeted entry/exit ports for multiple drop wire installations. The unit features a ¼ turn fastener for easy open/close access using a 216 tool (can wrench).

Terminal version

The IDC version of the TA-1642 is a 6-pair sealed termination device equipped with six (6) pre-installed individual IDC termination modules mounted onto a single common ground bus bracket. The bus bracket also allows common bonding of ground wire, sheath armor and/or strand wire. The IDC termination modules require no stripping of the copper wire insulation prior to connection. In addition, each module has two (2) ports for small gauge (22-24 AWG) wire terminations and two (2) ports that accept large gauge (18-19 AWG) or small gauge (22-24 AWG) wire for tip/ring connections. The ports are color coded for easy tip/ring identification. Labelling inside the cover allows for line identification of each IDC termination module along with illustrated installation instructions. Features

IDC version

Enclosure Housing

Terminal Version

• Engineered thermoplastic weatherproof enclosure • UV, Impact and chemical resistant • Flame retardant • Aerial, wall or pole/piling mounting applications • Optional strand hanger brackets • Quarter-turn stainless steel fastener • Eight grommeted cable entry/exit ports • UL® listed • Craft-friendly design

• An alternative to the 116 or 104 closure • Houses 142 and 57 style protectors • Accepts AFL, AT&T and Reliable terminal blocks • Available with binding post, IDC or gas tube protection. IDC Version

• Individual gel-sealed IDC termination modules pre-installed • 18-24 AWG copper wire termination

Ordering Information

Optional hanger brackets

DESCRIPTION TA-1642 Terminal Enclosure with #90313 Terminal Block (6-Pair) TA-1642 Terminal Enclosure with six 125-style Gas Tube Protectors TA-1642 Hanging Hardware Kit (for 5/16" to 7/16" strand) TA-1642 IDC Terminal Enclosure TA-1642 Hanger Bracket Kit (for 5/16" to 7/16" strand)

MODEL NO. 1642-1-34 1642-1-37 1642 Hanging Hardware 1642 IDC 1642 Hanging Hardware Kit

AFL NO. 90379 DM000124 90323 DM000254 90323

© 2006, AFL, all rights reserved. PP-2-00030, Revision 2, 6.10.11 Specifications are subject to change without notice.

220

Terminal Access TA-1642XL Termination Enclosure The TA-1642XL termination enclosure can be outfitted with heavy plated steel hangers designed to grip the support strand and prevent rotation. Internal punch-out holes allow for wall or pole mounting. Stainless steel lashing straps can be mounted through punch-outs for pole, post or piling mounting. Features •  An alternative to the 116 or 104 closure •  Corrosion and weatherproof •  Pole or wall mountable •  Quarter-turn stainless steel cover fastener •  Eight grommeted cable entry/exit ports •  Houses 142 and 57 style protectors •  Accepts AFL, AT&T and Reliable terminal blocks • Impact and chemical resistant engineered thermoplastic Ordering Information DESCRIPTION TA-1642XL enclosure, empty, no strand hanging hardware included TA-1642 Hanging Hardware Kit (for 5/15" to 7/16" strand)

MODEL NO. 1642XL

AFL NO. 912809-00-00

1642 Hanging Hardware Kit 90323

© 2004, AFL, all rights reserved. PP-2-00031, Revision 2, 6.10.11 Specifications are subject to change without notice.

221

Terminal Access TA-200/205 Terminal Enclosure The TA-200/205 is a secure environmentally protected two-pair terminal enclosure. Mounting hardware and terminal studs are included. The TA-200 enclosure features grommeted openings and a provision for a security device. Features • Corrosion proof and environmentally protected • Pole or wall mountable • Secure hinged cover design • Grommeted cable entry/exit ports • Impact and chemical resistant engineered thermoplastic • Available in two configurations Specifications

TA-200

PARAMETER Insulation Resistance Series Resistance Dielectric Withstand Dielectric Withstand to Mounting Surfaces High Current Capacity Cable Entrances Torque High Temperature Storage/Mold Stress °F (°C) Temperature Cycling °F (°C) Temperature Cycling with Humidity °F (°C) Impact Test °F (°C) Drop Test °F (°C) Rain Salt Fog (Days Exposed) Sunshine (Days Exposed) Fungus Resistance Flammability Chemical Resistance 30 Days at 100 °F and 95% RH Subject to:

VALUE Minimum of 100 mΩ @ ± 200 V DC 100 mΩ maximum with jacks mated 1000 Vrms for 1 minute Minimum 2500 Vrms 5 amp current for 15 minutes 0.5" input, 0.5" output 20 in./lbs. 14 days at 159 (70.55) 30 day cycling from -40 to 140 (-40 to 60) 30 day cycling from 40 to 140 (4.44 to 60) with 95% RH -40 (-40) -40 (-40) UL® 1863 for 24 hours at 10 psi 30 60 ASTM G-21 rating of 0 Oxygen index of 28%, UL746C 5 flame test

Dimensions (H x W x D) in. (cm)

3.13 x 3.63 x 2.5 (7.95 x 9.22 x 6.35)

CRC226 water displacement lubricant, WD40 water displacement lubricant, 4353 ant and wasp spray, 3% H2SO4, 0.2N NaOH, Kerosene, 10% Igepal CO-630

Ordering Information DESCRIPTION Two pair terminal closure Two pair terminal closure - with ground stud

MODEL NO. TA-200 TA-205

AFL NO. 911188-04 911283-00-01

TA-205

© 2002, AFL, all rights reserved. PP-2-00032, Revision 2, 6.10.11 Specifications are subject to change without notice.

222

EOC Splitters Ethernet Over Coax Splitters provide dual use of your home coax network. By allowing for extended operation below 5MHz, EOC splitters can be used to operate home Ethernet-based networks such as HPNA, while allowing for regular CATV service. Features • Standard F connector 3/8"-32 UNF • Rugged die-cast construction with universal screw mounting points • Available in 1x2, 1x3, 1x4, and 1x6 port configurations (in x out) • Pass TVRF frequencies between 600-700 MHz with less than 17 dB insertion loss between any two ports • Shielded encasements with capacity to provide >110 dB EMI isolation • Port-to-port insertion loss from 100 kHz to 200 MHz 12 dB from 100 kHz to 200 MHz > 10 dB from 200 MHz to 700 MHz Operating Environment (system ambient) Temperature: -20°C to 85°C Altitude: -197 to 7000 feet Relative Humidity: 5% to 100% non-condensing MWB: 23°C Shipping and Storage Environment Temperature: -20°C to 85°C Relative Humidity: 5% to 100% MWB: 29°C

Ordering Information MODEL NO. 1x2 EOC Splitter 1x3 EOC Splitter 1x4 EOC Splitter 1x6 EOC Splitter

AFL NO. DM000372 DM000373 DM000374 DM000375

© 2008, AFL, all rights reserved. PP-2-00007, Revision 1, 6.10.11 Specifications are subject to change without notice.

223

Radio Frequency Interference Filter (RFI-P) The Radio Frequency Interference Filter (RFI-P) is customer premise installed inside the Station Network Interface. It is designed to block unwanted RF energy as well as bypass RF energy to earth ground, while remaining transparent to normal loop signaling and test voltages. Using the earth ground connection, this filter acts like a drain: providing a path to ground for the RF energy to bleed off the phone line from both the network and customer side of the network interface. It effectively eliminates all common mode and differential mode RF interference induced on the phone line in the vicinity of the RFI-P filter. Laboratory Testing Features • Suppresses RF interference across AM, FM, CB, VHF, TV, Amateur and UHF band • Maximum suppression occurs in the AM band • Bypasses unwanted RF energy to earth ground • Excellent balance between Tip and Ring • Eliminates all common mode and differential mode RF interference • Designed for use in outdoor or indoor Network Interface Devices at the customer premise • Transparent to normal loop signaling and test voltages

Laboratory results shown below demonstrate that the RFI-P Filter introduces greater attenuation over a broader bandwidth when compared to the Telcordia® requirement.

Block Diagram / Connections / Dimensions

Ordering Information DESCRIPTION RFI Circuit – Environmentally encapsulated with spade ended wire leads

MODEL NO. RFI-P

AFL NO. 90931

© 2002, AFL, all rights reserved. PP-2-00017, Revision 2, 6.10.11 Specifications are subject to change without notice.

224

Half Ringer Equivalent Circuit The Half Ringer Equivalant Circuit allows automatic or manual testing to be performed from the central office without interrupting service to the customer. The Half Ringer, when connected in parallel with the phone line, poses a 0.5 REN load. The Half Ringer is available in three different packages for both indoor and outdoor use and can be used in a variety of applications. Factory installation in a number of Network Interfaces Devices is available; please consult Customer Service for specifics. HR-100

Features • Available in a variety of packaging • 0.5 Ringer Equivalance • Installed parallel to the line • Versions available for indoor or outdoor (ruggedized) use Ordering Information

1B-2 Module

DESCRIPTION Half Ringer installed in a ruggedized thermoplastic shell, installs easliy in Network Interface units for outdoor use Half Ringer installed in a standard footprint two-wire line module for use in Network Interface Devices Half Ringer packaged to retrofit onto a 66-type punchdown block, provides bridged test points

MODEL NO. HR-100

AFL NO. 90462

1B-2

90830-01

HR-66T

911338-00-00

HR-66T

© 2002, AFL, all rights reserved. PP-2-00008, Revision 2, 6.10.11 Specifications are subject to change without notice.

225

Fujikura 70S Fusion Splicer

70S

The Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features

In case with lid detached

•• Automated and programmable wind protector •• 14-second automated tube heater •• Fully ruggedized for shock, dust and moisture •• Li-ion battery with 200 splices/shrinks per charge •• 5 mm cleave length for splice on connector or small package needs •• Sheath clamp or fiber holder operation •• On-board training and support videos •• Internet software upgrades •• Multi-function transit case with integrated workstation Ordering Information DESCRIPTION 70S Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 70S Fusion Splicer Kit (with cleaver) Includes: CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, and CC30 Transit Case with Carrying Strap 70S Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty

AFL NO. S015580

S015590

S015591

S012996 S013000

© 2013, AFL, all rights reserved. PP-4-00059, Revision 3, 5.26.2015 Specifications are subject to change without notice.

226

Fujikura 70S Fusion Splicer Recommended Accessories for the 70S DESCRIPTION Cleavers CT-06A Cleaver CT-30A Cleaver Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair) FH-60-160 Fiber Holder (pair) FH-60-LT900 Fiber Holder (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) Sheath Clamps CLAMP-S70C Sheath Clamp (Coating diameter from 100 µm - 1000 µm (5-16 mm cleave)) CLAMP-S70D Sheath Clamp (900 µm diameter loose tube fiber (5-16 mm cleave))

AFL NO.

DESCRIPTION Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) SL-01 Sleeve Loader Worktable Upper Worktable Lower Inner Box Set USB Cable CC-30 Transit Case

S015276 S014080 S014548 S014549 S014690 S015181 S015275 S014696 S014695 S014697 S014705 S014704 S015586 S015862

AFL NO. S015585 S014536 S015581 S015582 S013552 S013556

S013532 S014773 S010532 S016100 S015674 S015779 S015780 S015979 S014777 S015587

Specifications PARAMETER Model Applicable Fibers Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss Splicing Time Arc Calibration Method Splicing Modes Splice Loss Estimate Storage of Splice Result Fiber Display Magnification Viewing Method Operating Condition Mechanical Proof Test Tube Heater Tube Heating Time Protection Sleeve Length Splice/Heat Cycles with Battery Electrode Life Power Supply Terminals Wind Protection Dimensions Weight

VALUE 70S Fusion Splicer Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) 80 - 150 μm 100 μm to 1,000 μm 5 to 16 mm 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds; AUTO mode — 15 seconds with SM fiber Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available 100 preset and user programmable modes Based upon dual camera core axis alignment data Last 2,000 results stored in the internal memory X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation 320X for single X or Y view, or 200X for X and Y view Dual cameras with 4.7 inch TFT color LCD monitor 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively 1.96 to 2.25N Built-in tube heater with 30 heating modes; auto-start function Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves 60 mm, 40 mm, micro Typical 200 cycles with power save functions activated 3,000 Arc Discharges Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 Maximum wind velocity of 15 m/s. (34 mph) 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

© 2013, AFL, all rights reserved. PP-4-00059, Revision 3, 5.26.2015 Specifications are subject to change without notice.

227

Fujikura 21S Fusion Splicer The Fujikura 21S active cladding alignment fusion splicer bridges the long standing gap between core alignment and fixed v-groove fusion splicer technology. Moveable v-grooves eliminate splicer errors due to dust and other contaminants. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 200 splice cycles which include application of the splice protection sleeve. 21S (with Cleaver for scale)

The Fujikura 21S incorporates features typically found only in more expensive models. Removable sheath clamps allow the use of fiber holders if desired. The large 4.7" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 21S is also fully compatible with the FUSEConnect® line of fusion installable connectors. Backed by the best service team in the industry, the Fujikura 21S is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application.

Workstation in Transit Case

Features •• Dual camera, active cladding alignment technology •• World’s smallest active clad alignment splicer at 4.72"W x 7.44"D x 2.8"H •• Fully ruggedized for shock, moisture and dust resistance •• Transit case converts to easy to use workstation •• Extended life electrodes •• Long life battery (200 splices/shrinks per charge) •• Auto start tube heater

Workstation on Transit Case

Fujikura 21S Kit 1

Ordering Information DESCRIPTION Fujikura 21S Fusion Splicer Includes: Fujikura 21S Fusion Splicer, S21A Sheath Clamp, ADC-19 AC Adapter, BTR-11 Battery Pack (installed), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container,SD01 Screwdriver and CC-32 Transit Case Fujikura 21S Fusion Splicer Kit 1 Includes: Fujikura 21S Fusion Splicer, CT-30A Cleaver, S21A Sheath Clamp, ADC-19 AC Adapter, BTR-11 Battery Pack (installed), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-32 Transit Case Fujikura 21S Fusion Splicer Kit 2 Includes: Fujikura 21S Fusion Splicer, CT-06A Cleaver, S21A Sheath Clamp, ADC-19 AC Adapter, BTR-11 Battery Pack (installed), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-32 Transit Case One Year Extended Warranty Two Year Extended Warranty

AFL NO. S016111

S016155

S016154

S012996 S013000

© 2015, AFL, all rights reserved. PP-4-00082, Revision 0, 1.22.15 Specifications are subject to change without notice.

228

Fujikura 21S Fusion Splicer Recommended Accessories for the 21S DESCRIPTION Cleavers CT-06A Cleaver CT-30A Cleaver Fiber Holders FH-60-250 Fiber Holder (250 µm single fiber) FH-60-900 Fiber Holders (900 µm single fiber) FH-60-LT900 (900 µm loose buffer tube) FH-60-LT900 Single Side Fiber Holder Sheath Clamps CLAMP-S21A Sheath Clamp CLAMP-S21B Sheath Clamp Batteries BTR-11 Battery Pack

AFL NO.

DESCRIPTION FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) Miscellaneous Worktable Set TS-01 Tripod Screw ELCT2-12 Electrodes ADC-19 AC Adapter ACC-09 Power Cord AP-01 Alcohol Container SD-01 Screwdriver CC-32 Transit Case

S015276 S014080 S014548 S014549 S015181 S015275 S016160 S016161 S016156

AFL NO. S014696 S014695 S014697 S014705 S014704 S016157 S015895 S014028 S015523 S014390 S015525 S015526 S016158

Specifications PARAMETER Applicable Fibers Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss Splicing Time Arc Calibration Method Splicing Modes Splice Loss Estimate Storage of Splice Result Fiber Display Magnification Viewing Method Operating Condition Mechanical Proof Test Tube Heater Tube Heating Time Protection Sleeve Length Splice/Heat Cycles with Battery Electrode Life Power Supply Terminals Wind Protection Dimensions Weight

VALUE Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) 125 μm 100 μm to 3000 μm 5 mm to 16 mm 0.03 dB (SM), 0.01 dB (MM), 0.05 dB (DS) and 0.05 dB (NZDS) Typical 9 sec with SM Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Total 100 splice modes Based on dual camera cladding alignment data Last 2,000 splices 4.7 inch TFT color LCD with X or Y view or both X and Y view simultaneously 200X magnification for X/Y view 2 axis CMOS camera Altitude: 0 to 3,660 m above sea level, -10° to 50° C, Humidity: 0 to 95% RH, non-dew 1.96 N 30 heating modes Typical 30 sec with FP-60 (60 mm) sleeve 60 mm, 40 mm, micro Typical 200 cycles with BTR-11 3,000 splices Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery USB 2.0 Maximum wind velocity of 15 m/s. (34 mph) 120 x 189 x 71 (mm) / 4.72" x 7.44" x 2.8" (inches) 1.14 kg (2.51 lbs) with battery

© 2015, AFL, all rights reserved. PP-4-00082, Revision 0, 1.22.15 Specifications are subject to change without notice.

229

Fujikura 19S Fusion Splicer

19S

The Fujikura 19S is a low cost, fixed v-groove single fiber splicer with similar features found on the Fujikura 70S. Incorporating the proven ruggedized features pioneered by Fujikura, the 19S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a faster shrink time. Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features

In case with lid detached

•• Automated and programmable wind protector •• Fully ruggedized for shock, dust and moisture •• Li-ion battery with 180 splice/heat cycles per charge •• 5 mm cleave length for splice on connector or small package needs •• Sheath clamp or fiber holder operation •• On-board training and support videos •• Internet software upgrades •• Multi-function transit case with integrated workstation

Ordering Information DESCRIPTION 19S Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 19S Fusion Splicer Kit (with cleaver) Includes: CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, and CC30 Transit Case with Carrying Strap 19S Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty

AFL NO. S015679

S015680

S015681

S012996 S013000

© 2013, AFL, all rights reserved. PP-4-00072, Revision 3, 10.15.2014 Specifications are subject to change without notice.

230

Fujikura 19S Fusion Splicer Recommended Accessories for the 19S DESCRIPTION Cleavers CT-06A Cleaver CT-30A Cleaver Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair)

AFL NO.

FH-60-LT900 Fiber Holder (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect™ Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair) Sheath Clamps CLAMP-S70C Sheath Clamp (Coating diameter from 100 µm - 1000 µm (5-16 mm cleave)) CLAMP-S70D Sheath Clamp (900 µm diameter loose tube fiber (5-16 mm cleave))

S015181 S015275

DESCRIPTION Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) SL-01 Sleeve Loader Worktable Upper Worktable Lower Inner Box Set CC-30 USB Cable

S015276 S014080 S014548 S014549

S014696 S014695 S014697 S014705 S014704 S015586 S015862

AFL NO. S015585 S014536 S015581 S015582 S013552 S013556

S013532 S014773 S010532 S016100 S015674 S015779 S015780 S015979 S015587 S014777

Specifications PARAMETER Model Applicable Fibers Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss Splicing Time Arc Calibration Method Splicing Modes Splice Loss Estimate Storage of Splice Result Fiber Display Magnification Viewing Method Operating Condition Mechanical Proof Test Tube Heater Tube Heating Time Protection Sleeve Length Splice/Heat Cycles with Battery Electrode Life Power Supply Terminals Wind Protection Dimensions Weight

VALUE 19S Fusion Splicer Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) 125 μm 100 μm to 1,000 μm 5 to 16 mm 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards SM FAST mode — 9 seconds; SM AUTO mode — 11 seconds; AUTO mode — 11 seconds Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available 100 preset and user programmable modes Based upon dual camera cladding axis offset alignment data Last 2,000 results to be stored in the internal memory X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation 320X for single X or Y view, or 200X for X and Y view Dual cameras with 4.73 inch TFT color LCD monitor 0 to 3,660 m above sea level, 0 to 95%RH and -10 to 50°C respectively 1.96 to 2.25N Built-in tube heater with 30 heating modes; auto-start function 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves 60 mm, 40 mm, micro Typical 180 cycles with power save functions activated 3,000 Arc Discharges Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater Maximum wind velocity of 15 m/s. (34 mph) 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery

© 2013, AFL, all rights reserved. PP-4-00072, Revision 3, 10.15.2014 Specifications are subject to change without notice.

231

Fujikura 12S Fusion Splicer The Fujikura 12S is the world’s smallest, lightest and most portable fusion splicer available today. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 100 splice cycles which include application of the splice protection sleeve. 12S (with Cleaver for scale)

The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FUSEConnect® line of fusion installable connectors. Backed by the best service team in the industry, the Fujikura 12S is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application.

Workstation in Transit Case

Features •• World’s smallest splicer at 4.76"W x 6.38"D x 2.24"H •• Fully ruggedized for shock, moisture and dust resistance •• Transit case converts to easy to use workstation •• Dual camera, fixed v-groove alignment technology •• Extended life electrodes •• Long life battery (100 splices/shrinks per charge) Ordering Information

Workstation on Transit Case

Fujikura 12S Kit 1

DESCRIPTION Fujikura 12S Fusion Splicer Includes: Fujikura 12S Fusion Splicer, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-60-250 Fiber Holders (pair), FH-60-900 Fiber Holder, ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case Fujikura 12S Fusion Splicer Kit 1 Includes: Fujikura 12S Fusion Splicer, CT-30 Cleaver, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-60-250 Fiber Holders (pair), FH-60-900 Fiber Holders (pair), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case Fujikura 12S Fusion Splicer Kit 2 Includes: Fujikura 12S Fusion Splicer, CT-06 Cleaver, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-60-250 Fiber Holders (pair), FH-60-900 Fiber Holders (pair), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case One Year Extended Warranty Two Year Extended Warranty

AFL NO. S015521

S015522

S015530

S012996 S013000

© 2013, AFL, all rights reserved. PP-4-00028, Revision 4, 1.22.2015 Specifications are subject to change without notice.

232

Fujikura 12S Fusion Splicer Recommended Accessories for the 12S DESCRIPTION Cleavers CT-06 Cleaver (for single fibers) CT-30 Cleaver (for single to 12 ribbon fibers) Fiber Holders FH-60-250 Fiber Holder (pair) FH-60-900 Fiber Holder (pair)

AFL NO.

FH-60-LT900 Fiber Holder (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair)

S015181 S015275

DESCRIPTION Batteries BTR-10 Battery Pack Miscellaneous Worktable Set TS-01 Tripod Screw ELCT2-12 Electrodes ADC-19 AC Adapter ACC-09 Power Cord AP-01 Alcohol Container SD-01 Screwdriver CC-29 Transit Case USB Cable

S015588 S014076 S014548 S014549

S014696 S014695 S014697 S014705 S014704

AFL NO. S015527 S015817 S015895 S014028 S015523 S014390 S015525 S015526 S015524 S014777

Specifications PARAMETER Model Applicable Fibers Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss Splicing Time Arc Calibration Method Splicing Modes Splice Loss Estimate Storage of Splice Result Fiber Display Magnification Viewing Method Operating Condition Mechanical Proof Test Tube Heater Tube Heating Time Protection Sleeve Length Splice/Heat Cycles with Battery Electrode Life Power Supply Terminals Wind Protection Dimensions Weight

VALUE 12S Fusion Splicer Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) 125 μm 250 μm or 900 μm 5 mm to 13 mm 0.05 dB (SM), 0.02 dB (MM), 0.08 dB (DS) and 0.08 dB (NZDS) Typical 15 sec with SM Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Total 100 splice modes Based on dual camera cladding alignment data Last 2,000 splices 4.5 inch TFT color LCD with X or Y view or both X and Y view simultaneously 100X magnification for X/Y view 2 axis CMOS camera Altitude: 0 to 3,660 m above sea level, -10° to 50° C, Humidity: 0 to 95% RH, non-dew 1.96 N 30 heating modes Typical 30 sec with FP-03 (60 mm) sleeve 60 mm, 40 mm, micro Typical 100 cycles with BTR-10 3,000 splices Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery USB 2.0 Maximum wind velocity of 15 m/s. (34 mph) 121 x 162 x 57 (mm) / 4.76 x 6.38 x 2.24 (inches) .776 kg (1.71 lbs) with battery

© 2013, AFL, all rights reserved. PP-4-00028, Revision 4, 1.22.2015 Specifications are subject to change without notice.

233

Fujikura 70R Fusion Splicer

70R

The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features

In case with lid detached

•• Automated and programmable wind protector •• 40-second automated tube heater •• Fully ruggedized for shock, dust and moisture •• Li-ion battery with 110 splices/shrinks per charge •• On-board training and support videos •• Internet software upgrades •• Multi-function transit case with integrated workstation Ordering Information DESCRIPTION 70R Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 70R Fusion Splicer Kit (with cleaver) Includes: CT30 Cleaver, HJS-02 Stripper, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 70R Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30 Cleaver, HJS-02 Stripper, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty

AFL NO. S015669

S015670

S015671

S012996 S013000

© 2013, AFL, all rights reserved. PP-4-00071, Revision 3, 5.26.2015 Specifications are subject to change without notice.

234

Fujikura 70R Fusion Splicer Accessories Recommended for the 70R DESCRIPTION Cleavers and Strippers CT-30 Cleaver HJS-02 Hot Jacket Stripper Fiber Holders (pairs) FH-50-12 FH-50-10 FH-50-8 FH-50-6 FH-50-4 FH-50-2 FH-50-250 (250 μm coated single fiber) FH-50-900 (900 μm jacketed single fiber) FH-60-LT900 (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair)

DESCRIPTION Batteries and Power Cords ADC-18 AC Adapter BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects ADC-13 to cigarette lighter socket) DCC-13 Power Cord (connects ADC-13 to power source via alligator clips) ACC-14 AC Power Cord Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) FST-12 Fiber Separation Tool FAT-04 Fiber Arrangement Tool FAA-03A Ribbon Forming Adhesive (4 oz. bottle) FAA-03A Ribbon Forming Adhesive (0.5 liter bottle) CC-30 Transit Case

AFL NO. S014076 S014080 S013828 S013824 S013820 S013816 S013812 S013808 S013800 S013804 S015181 S015275 S014696 S014695 S014697 S014705 S014704

AFL NO. S015585 S015581 S015582 S013552 S013556 S014536 S013532 S014773 S010532 S016100 S014012 S010212 S008720 S008622 S015587

Specifications PARAMETER Model Applicable Fibers Fiber Count Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss

VALUE FSM-70R Fusion Splicer Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Single, 2, 4, 5, 6, 8, 10, 12 125 µm Ribbon: 0.25 mm to 0.4 mm, Single: 250 µm and 900 µm 10 mm 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T standards Splicing Time Typical 15 seconds with standard single-mode fiber Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera cladding alignment data Storage of Splice Result Last 2000 splice results stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation Magnification 35X to 90X Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating Operating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively Mechanical Proof Test 1.96 to 2.25 N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves Protection Sleeve Length 60 mm, 40 mm, Micro Splice/Heat Cycles with Battery Typical 110 cycles with power save functions activated Electrode Life 1,500 Arc Discharges Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery Terminals USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 Wind Protection Maximum wind velocity of 15m/s (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery © 2013, AFL, all rights reserved. PP-4-00071, Revision 3, 5.26.2015 Specifications are subject to change without notice.

235

Fujikura 19R Fusion Splicer

19R

The Fujikura 19R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 4 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 19R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 18-second shrink time for 4-fiber ribbon. The result is a total splice process time of approximately 29 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 140 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features

In case with lid detached

•• Automated and programmable wind protector •• 18-second automated tube heater •• Fully ruggedized for shock, dust and moisture •• Li-ion battery with 140 splices/shrinks per charge •• On-board training and support videos •• Internet software upgrades •• Multi-function transit case with integrated workstation Ordering Information DESCRIPTION 19R Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-4 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 19R Fusion Splicer Kit (with cleaver) Includes: CT30 Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-4 Fiber Holder, FH-50-250 Fiber Holder, FH-50-900 Fiber Holder, HJS-02 Stripper, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap 19R Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30 Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-4 Fiber Holder, FH-50-250 Fiber Holder, FH-50-900 Fiber Holder, HJS-02 Stripper, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap One Year Extended Warranty Two Year Extended Warranty

AFL NO. S015659

S015660

S015661

S012996 S013000

© 2013, AFL, all rights reserved. PP-4-00073, Revision 3, 5.26.2015 Specifications are subject to change without notice.

236

Fujikura 19R Fusion Splicer Recommended Accessories for the 19R DESCRIPTION Cleavers and Strippers CT-06 Cleaver CT-30 Cleaver HJS-02 Hot Jacket Stripper Fiber Holders FH-50-250 FH-50-900 FH-50-4 FH-50-2 FH-60-LT900 (pair) FH-60-LT900 Single Side Fiber Holder FUSEConnect® Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair)

AFL NO.

DESCRIPTION Batteries and Power Cords ADC-18 AC Adapter ACC-14 AC Power Cord BTR-09 Battery DCC-18 Battery Charge Cord DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) Miscellaneous ELCT2-20A Electrodes Portable Tripod Workstation (see product profile for more detail) ASW-02 Splicing Workstation (see product profile for more detail) JP-06 J-PLATE (70/19 Series) FST-12 FAT-04 Fiber Arrangement Tool FAA-03A Ribbon Forming Adhesive (4 oz. bottle) FAA-03A Ribbon Forming Adhesive (0.5 liter bottle) USB Cable CC-30 Transit Case

S015588 S014076 S010340 S013800 S013804 S013812 S013808 S015181 S015275 S014696 S014695 S014697 S014705 S014704

AFL NO. S015585 S014536 S015581 S015582 S013552 S013556

S013532 S014773 S010532 S016100 S014012 S010212 S008720 S008622 S014777 S015587

Specifications PARAMETER Model Applicable Fibers Fiber Count Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss Splicing Time Arc Calibration Method Splicing Modes Splice Loss Estimate Storage of Splice Result Fiber Display Magnification Viewing Method Operating Condition Mechanical Proof Test Tube Heater Tube Heating Time Protection Sleeve Length Splice/Heat with Battery Electrode Life Power Supply Terminals Wind Protection Dimensions Weight

VALUE FSM-19R Fusion Splicer Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Single, 2, 4 125 µm Ribbon: 0.25 mm to 0.4 mm; Single: 250 µm and 900 µm 10 mm 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS, measured by cut-back method relevant to ITU-T standards SM FAST mode - 11 seconds; SM AUTO mode - 15 seconds; Auto mode - 15 seconds Automatic, real-time by using results of previous splice when in AUTO mode, manual arc calibration function available 100 preset and user programmable modes Based upon dual camera cladding alignment data Last 2000 splice results stored in the internal memory X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation 90X Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating 0 to 5,000 m above sea level, 0 to 95% RH, -10 to 50°C respectively 1.96 to 2.25 N Built-in tube heater with 30 heating modes; auto-start function Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves 60 mm, 40 mm, micro Typical 140 cycles with power save functions activated 2,000 Arc Discharges Auto voltage selection from 100 to 240V AC or 10 to 15V DC with AC Adapter, 13.2V DC with battery USB 2.0 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 Maximum wind velocity of 15m/s (34 mph) 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery

© 2013, AFL, all rights reserved. PP-4-00073, Revision 3, 5.26.2015 Specifications are subject to change without notice.

237

Fujikura 12R Fusion Splicer The Fujikura 12R is the world’s smallest, lightest and most portable fusion splicer available today. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 100 splice cycles which include application of the splice protection sleeve. 12R (with Cleaver for scale)

The Fujikura 12R incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 1,500 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12R is also fully compatible with the FuseConnect line of fusion installable connectors. Backed by the best service team in the industry, the Fujikura 12R is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application. Features

Workstation in Transit Case

•• World’s smallest splicer at 4.76"W x 6.38"D x 2.24"H •• Fully ruggedized for shock, moisture and dust resistance •• Transit case converts to easy to use workstation •• Dual camera, fixed v-groove alignment technology •• Extended life electrodes •• Long life battery (100 splices/shrinks per charge) Ordering Information

Workstation on Transit Case

DESCRIPTION AFL NO. Fujikura 12R Fusion Splicer S015571 Includes: ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-50-4 Fiber Holders (Pair), ACC-09 Power Cord, ELCT2-12 Spare Electrodes (Pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case Fujikura 12R Fusion Splicer Kit S015667 Includes: CT-30 Cleaver, ADC-19 AC Adapter, BTR-10 Battery Pack (installed), FH-50-4 Fiber Holders (Pair) FH-50-250 Fiber Holders (Pair), FH-50-900 Fiber Holders (Pair), ACC-09 Power Cord, HJS-03 Hot Jacket Stripper, ELCT2-12 Spare Electrodes (Pair), Operation Manual on CD, Quick Reference Guide, AP-01 Alcohol Container, SD01 Screwdriver and CC-29 Transit Case

Fujikura 12R Kit

© 2013, AFL, all rights reserved. PP-4-00060, Revision 1, 2.3.2014 Specifications are subject to change without notice.

238

Fujikura 12R Fusion Splicer Recommended Accessories for the 12R DESCRIPTION Cleavers & Strippers CT-30 Cleaver (for single to 12 ribbon fibers) HJS-03 Battery Powered Hot Jacket Stripper Fiber Holders FH-50-2 (2 ribbon fiber) FH-50-4 (4 ribbon fiber) FH-50-250 (250 µm single fiber) FH-50-900 Fiber Holders (900 µm single fiber) FH-60-LT900 (900 µm loose buffer tube) FH-60-LT900 Single Side Fiber Holder FUSEConnect™ Accessories FH-FC-20 (900 µm within 2.0 mm sheathing) (each) FH-FC-30 (900 µm within 3.0 mm sheathing) (pair) FH-FC-900 (900 µm cable) (each) CLAMP-FC-2000 (pair) CLAMP-FC-3000 (pair)

AFL NO.

DESCRIPTION Batteries BTR-10 Battery Pack Miscellaneous Worktable Set TS-01 Tripod Screw ELCT2-12 Electrodes ADC-19 AC Adapter ACC-09 Power Cord AP-01 Alcohol Container SD-01 Screwdriver CC-29 Transit Case

S014076 S013996 S013808 S013812 S013800 S013804 S015181 S015275

AFL NO. S015527 S015817 S015895 S014028 S015523 S014390 S015525 S015526 S015524

S014696 S014695 S014697 S014705 S014704

Specifications PARAMETER Model Applicable Fibers Fiber Count Cladding Diameter Coating Diameter Fiber Cleave Length Typical Average Splice Loss Splice Time Arc Calibration Method Splicing Modes Splice Loss Estimate Storage of Splice Result Fiber Display Magnification Viewing Method Operating Condition Mechanical Proof Test Tube Heater Tube Heater Time Protection Sleeve Length Splice/Heat with Battery Electrode Life Power Supply Terminals Wind Protection Dimensions Weight with Battery

VALUE Fujikura 12R Fusion Splicer Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Single to 4-fiber ribbon 125 μm 250 μm and 900 μm 10 mm 0.05 dB (SM), 0.02 dB (MM), 0.08 dB (DS) and 0.08 dB (NZDS) Typical 20 sec with SM Automatic, real-time by using results of previous splice when in AUTO mode, manual arc calibration function available Total 100 splice modes Based upon dual camera cladding alignment data Last 2,000 splices 4.5 inch TFT color LCD with X or Y view or both X and Y view simultaneously 66X magnification in X or Y view; 33X magnification in X and Y view 2 axis CMOS camera 0 to 3,660 m above sea level (single fiber),0 to 95% RH non-dew, -10 to 50°C respectively 1.96 to 2.25 N 30 heating modes Typical 30 sec with FP-03 (60 mm) and FP-04 sleeves 60 mm, 40 mm, micro Typical 100 cycles with BTR-10 1,500 splices Auto select from 100V to 240V with AC adapter, 14.8 V DC with installed battery USB 2.0 Maximum wind velocity of 15 m/s. (34 mph) 121W x 162D x 57H (mm) / 4.76 W x 6.38 D x 2.24 H (inches) 776 g / 1.71 lbs.

© 2013, AFL, all rights reserved. PP-4-00060, Revision 1, 2.3.2014 Specifications are subject to change without notice.

239

CT-06 Fiber Cleaver The CT-06 fiber optic cleaver is an improved version of the previously released CT-05 providing high quality cleaving at an economical price. Designed for cleaving single fibers only, this cleaver is best suited for the installation of field installable connectors and mechanical splices. The rugged yet scaled-down design offers cleave quality approaching that of more expensive high precision cleavers. The long-life, 16-position circular blade performs cleaving operation in one single step. A manual scrap collector is included. Features •• Dedicated for single fiber cleaving •• Simple and single-step operation •• Blade life up to 48,000 cleaves •• Compact and light weight •• Equipped with fiber scrap collector Specifications PARAMETER Applicable Fiber Fiber Count Coating Diameter Cladding Diameter Cleave Length

Shown in CC-28 Carrying Case

VALUE Conventional silica optical fiber Single fiber 0.25 to 0.9 mm 125 µm CT-06 - 10 mm with fiber holder CT-06A - 5 to 20 mm with 250 μm coated fiber CT-06A - 10 to 20 mm with 900 μm fiber Average 1˚ 113.5 mm x 82 mm x 42 mm (4.5" x 3.2" x 1.7") 225 g (0.5 lbs) 48,000 fibers (1,000 fibers x 3 heights x 16 positions)

Cleave Angle Capability Dimensions (W x D x H) Weight Blade Lifetime

Ordering Information

Included with Cleaver: •• AD-10 Adapter Plate (CT-06A) •• CC-28 Carrying Case •• Hex Wrench •• Scrap Collector •• Instruction Manual

DESCRIPTION APPLICATION CT-06 Single Fibers: 250 to 900 µm coating, 125 µm cladding

FIBER HANDLING SYSTEM Purchased seperately FH-50-250 FH-60-250 FH-50-900 FH-60-900 Single Fibers: AD-10 Adapter Plate 250 to 900 µm coating, (Included) 125 µm cladding

CLEAVE LENGTH 10 mm

AFL NO. S015588

CT-06A

250 µm: 5 to 20 mm 900 µm: 8 to 20 mm

S015276

Accessories DESCRIPTION CB-05 Replacement Blade for CT-06 Cleaver CC-28 Carrying Case for CT-06 Cleaver AD-10 Single Fiber Adapter Plate AD-30B Adapter Plate (16 mm cleave length) AD-30C Adapter Plate for 2 & 3mm Cord

AFL NO. S015689 S015700 S014817 S014100 S015896

© 2013, AFL, all rights reserved. PP-4-00065, Revision 2, 10.15.14 Specifications are subject to change without notice.

240

CT-11A Fiber Cleaver The CT-11A fiber optic cleaver provides high-quality, angled cleaving at an economical price. Designed for cleaving single fibers only, this cleaver is suitable for the installation of field installable connectors and mechanical splices. Rugged and durable, the CT11A provides user adjustable angled cleaving capability from zero to nine degrees. The CT11A is supplied with a factory adjustment of eight degrees, the industry standard. The angle cleaving mechanism is easy to use, simple to adjust, and consistent. Features •• Dedicated for single fiber cleaving •• Angle cleaving capability of zero to nine degrees •• User replaceable flat diamond blade •• Blade life up to 64,000 cleaves •• Compact and light weight •• Easy operation Specifications PARAMETER Applicable Fiber Fiber Count Coating Diameter Cladding Diameter Cleave Length

VALUE Conventional silica optical fiber Single fiber 250 µm to 900 µm 125 µm 6 to 20 mm (with AD-10 & coating = 250 µm) 8 to 20 mm (with AD-10 & coating > 250 µm) 10 mm (with FH-50/60 fiber holders) 0 to 9˚ (adjustable) 110 mm x 79 mm x 49 mm (4.3" x 3.1" x 1.9") 335 g (0.74 lbs) 64,000 fiber cleaves (4,000 x 16 positions)

Cleave Angle Capability Dimensions (W x D x H) Weight Blade Lifetime

Ordering Information DESCRIPTION APPLICATION FIBER HANDLING SYSTEM CLEAVE LENGTH CT-11A Single Fibers: AD-10 Adapter Plate 250 µm: 6 to 20 mm 250 to 900 µm coating, 900 µm: 8 to 20 mm 125 µm cladding

Included with Cleaver: •• AD-10 Adapter Plate •• CC-25 Carrying Case •• Hex Wrench •• Tweezers •• Instruction Manual

AFL NO. S014785

Accessories DESCRIPTION CB-02 Replacement Blade for CT-11A Cleaver CC-25 Carrying Case for CT-11A Cleaver AD-10 Single Fiber Adapter Plate

AFL NO. S014819 S014842 S014817

© 2010, AFL, all rights reserved. PP-4-00010, Revision 1, 2.7.11 Specifications are subject to change without notice.

241

CT-30 Fiber Cleaver The CT-30 Cleaver sets the standard for portability, reliability and ease of use. Available for either single fiber or ribbon splicing (up to 12 fiber ribbons) applications, the CT-30 Cleavers are compatible with all AFL fusion splicers. The improved version offers a larger base for a more stable platform, improved visibility when placing the fiber, and three scrap collection options. Designed for excellent portability, the CT-30 is equally at home in a splicing van or in a bucket truck and is ideal for FTTx applications. The 16-position blade yields 48,000 single-fiber cleaves, or 4,000 12-fiber ribbon cleaves before requiring replacement, and the built-in scrap collector conveniently stores fiber shards until they can be safely discarded. The CT-30 Cleaver is packaged with three scrap collection options that allow the user to tailor it to their cleaving preferences. The CT30 is delivered with the SC-01 Side Cover installed for users that prefer not to use an automated scrap collection system. For those that prefer an automated scrap collection system, the FC-02 Fiber Collector and two scrap box options are included. The FDB-02 Scrap Box is a smaller bin for users seeking a compact profile. The FDB-03 Scrap Box is a larger bin with sweeping brush and static resistant surfaces for those users seeking to maximize scrap capacity. All scrap options are easily configured by the user. *Delivered as shown

Specifications PARAMETER Applicable Fiber Fiber Count Coating Diameter Cladding Diameter Cleave Angle Capability Blade lifetime Dimensions (W x D x H) Weight

VALUE Conventional silica optical fiber Single and up to 12 fiber ribbon 250 μm to 900 μm 125 μm typically