Trade Product Guide - Bayset [PDF]

Overall, you'll find the Bayset Trade Product ... 'Non Stock' items sourced and purchased on your behalf are subject to

6 downloads 33 Views 3MB Size

Recommend Stories


The Trade Heating Product Guide
Open your mouth only if what you are going to say is more beautiful than the silience. BUDDHA

ASUS PRODUCT GUIDE [PDF]
Jun 7, 2016 - 360-degree Rotating Display for 4 different Modes ...... (Gigahertz SM San Lazaro) 3/F Unit 334 SM San Lazaro F. Huertas Cor Lacson St. Sta Cruz, Manila. (Gigahertz VirraMall) V-317 ...... ZenFone 2 is the 5.5-inch smartphone that fi ts

ASH Product Maintenance Guide PDF
Every block of stone has a statue inside it and it is the task of the sculptor to discover it. Mich

product user guide - Mabey [PDF]
Jun 1, 2016 - 1. Introduction. 2. Design. 3. Identification of Components. Mabey's Mass 50 is a modular system intended for use in temporary works such as Propping, Needling, dead shoring ... System of Work, Method Statements and installation / disma

Inline Timber Product Guide(PDF)
The best time to plant a tree was 20 years ago. The second best time is now. Chinese Proverb

PRODUCT Guide
You have survived, EVERY SINGLE bad day so far. Anonymous

Vienna Travel Trade Guide
We can't help everyone, but everyone can help someone. Ronald Reagan

Inline Wall Drain Product Guide(PDF)
The greatest of richness is the richness of the soul. Prophet Muhammad (Peace be upon him)

National Semiconductor Amplifier Product Selection Guide (PDF)
Everything in the universe is within you. Ask all from yourself. Rumi

Product - PDF
Ego says, "Once everything falls into place, I'll feel peace." Spirit says "Find your peace, and then

Idea Transcript


Trade Pro duc t G uide Coopers Plains (07) 3722 3822 Unit 1, 76 Postle Street, Coopers Plains Qld 4108 [email protected]

Geebung (07) 3865 8457 238 Robinson Road, Geebung Qld 4034 [email protected]

Noosaville (07) 5473 0443 Unit 1, 17 Project Ave, Noosaville Qld 4566 [email protected]

Arundel (07) 5563 7033 14 Sinclair Street, Arundel Qld 4214 [email protected]

Mackay (07) 4952 1666 Unit 2, 3 Ginger Street, Mackay Qld 4740 [email protected]

Townsville (Opening Soon) (07) 4775 4855 77 Pilkington Street, Garbutt Qld 4814 [email protected]

Kawana (07) 5437 9145 Unit 1, 5 Dual Ave, Warana Qld 4575 [email protected]

Burleigh Heads (07) 5520 4251 2/15-17 Dover Drive, Andrews Qld 4220 [email protected]

bayset.com.au

2 n d E di t i o n

Welcome to the second edition of our Bayset Trade Product Guide. As one Australia’s largest independent suppliers to the Waterproofing, Flooring and Concrete Repair Industries, we are proud to present to you our most comprehensive product guide ever. This guide represents the latest technologies from our valued suppliers and gives you, our valued customer complete solutions for any given scenario.

Q ueensland

AUS TR A LI A

We have been working overtime to ensure that this product guide gives you solutions that are 100% relevant to the Australian market and provides easy access to a large range of products and systems from our conveniently located branches across Queensland. We have also been encouraged by the growing demand from our loyal customers to make Bayset a ‘One Stop Shop” for all their product and hardware requirements and our range has grown significantly over the past couple of years to accommodate this. We hope we have with this product guide made the process all that much easier and stress free with a comprehensive section showing our standard drawings and other useful information that will save you valuable time. Overall, you’ll find the Bayset Trade Product Guide is an easy to navigate full colour reference tool that you will want to have to hand at all times and we urge you to keep one in the truck and on the desk at home. Remember it’s just one call and we’ll do the rest.

Branch Locations

Brad Stephens

For full address details and telephone directory refer back page.

Managing Director

01

About Bayset

Established in 2000, Bayset is an independent specialist trade supplier to the Waterproofing, Flooring, Concrete Repair, and Building industries. We currently operate seven branches across Queensland and ship to customers across Australia. Mission To constantly give our customers outstanding customer service. With local knowledgeable well trained staff, Bayset pride itself on providing practical solutions for all your difficult problems. Our competitive pricing and prompt delivery make Bayset your ideal supply partner. Our highly respected technical team is capable of analytical problem solving for all remedial projects whether they are commercial, residential, civil or high rise and has direct access to many industry bodies and specialist companies worldwide. Through quality management practices we strive to bring innovation, environmental awareness, risk mitigation and best practice principles to our customers. Our vision is to become the No1. Trade supplier to our customer base with industry leading products and services and achieve continued loyalty from our team members, customers and suppliers. Key Strengths Conveniently located branches Committed and qualified technical staff Prompt attention to problem solving On site quality assurance systems Large stock holdings Extensive product ranges Fully warranted systems Computerised inventory systems Reliable delivery times Accessibility to our technical knowledge Sourcing of specialized items Showrooms and dedicated training areas are an important part of Bayset’s offer allowing our customers, suppliers and staff to interact and learn from our industry experience. Our 3000 square meter Coopers Plains distribution centre has all our key suppliers represented in one showroom and we offer full practical and theoretical training either on site or in house in an atmosphere of learning and real time experience.

Proud Members of:

02

Terms & Conditions: Summary

Warranty Bayset is a ‘distributor’ and not a manufacturer of products. We offer the ‘Warranty’ provided by the original manufacturer and are bound solely by these requirements. On items directly imported (therefore the deemed manufacturer), the warranty offered varies depending on the product and the original source of manufacture. Most items are warranted against faults and defects in manufacture for a period of (12) twelve months; however Bayset assumes no responsibility for the following: • • • •

Improper installation or failure to follow fitting or application instructions Failure due to improper maintenance Indirect or consequential loss or damage Cost of freight or travelling time

Trading Days Monday to Friday 6.30am - 4.00pm Settlement Terms All account customers – nett 30 days from the close of the month that items have been ordered and delivered. Non-account customers strictly CBD (Cash Before Delivery). GST The tax applicable will be governed by the laws operating in Australia at the time of sale. Special Orders ‘Non Stock’ items sourced and purchased on your behalf are subject to the relevant suppliers trading terms and conditions. All Special Orders MUST include a signed ‘Bayset – Non-stock purchase order form’ In the event of a credit return, a payment of 15%-25% restocking fee will apply. Custom made or made-to-order goods are strictly NON-REFUNDABLE. Returns for Credit Stock Items may be returned for credit providing the following: • Company notified within 30 days. • Goods returned must be in original condition and free from defects when returned. • Copy of invoice to accompany goods for return. Faulty /Damaged Stock Above conditions apply, however Bayset reserves the right to reject any claim(s) where the item has been opened or used in any application that may void the manufacturer’s warranty. Refer to page 312 for full Terms and Conditions.

03

Protective Coatings • Facade & Roof Membranes & Coatings........ 62 • Heat Reflective Membranes & Coatings....... 64 • Sealers........................................................... 65 • Curing Compounds...................................... 72

Protective Coatings

Facade & Roof Membranes & Coatings Globalcote Elastacote™ High Gloss Membrane

Protective Coatings

• Elastacote Membrane is a water based 100% acrylic coating ideal for extreme weather conditions typical in the southern hemisphere. The technology used in the manufacture of the Elastacote Membrane makes it adaptable in extremes of heat and cold, is durable enough to resist Australian summer storms, as well as being resilient in the snap freezes experienced in the southern states. • Complies with AS/NZS 4858 and AS 4654. • Available in 32 designer colours. Colour Size Code Light Grey 20 litre 472-300 Mid Grey 20 litre 472-301 Slate Grey 20 litre 472-302 Birch Grey 20 litre 472-303 Merino 20 litre 472-304 Terracotta 20 litre 472-305 Dark Terracotta 20 litre 472-306 Ebony 20 litre 472-307 Off White 20 litre 472-308

Globalcote Elastacote™ Mid Lustre Membrane • Elastacote Membrane is a water based 100% acrylic coating ideal for extreme weather conditions typical in the southern hemisphere. • The technology used in the manufacture of the Elastacote Membrane makes it adaptable in extremes of heat and cold, is durable enough to resist Australian summer storms, as well as being resilient in the snap freezes experienced in the southern states. • Complies with AS/NZS 4858 and AS 4654. • Available in 32 designer colours.

Colour Various

Size 20 litre

Code 420-103

Globalcote Membrane Colour Chart

Smooth Cream*

Surf Spray*

Evening Fog*

Merino*

Birch*

Afghan

Kasbah*

Ironbark

Cassius

Sienna

Terracotta#

Dark Terracotta

Tuscan Red*

Heritag Red*

Indian Red

Tiramisu#

Mist Green*

Rivergum*

Caulfield Green*

Mid Brunswick Green

Blue Sky

Torres Blue

Blue Horizon*

Mountain Blue*

Metallic Silver+

Med Grey#

Iron Grey*

Charcoal#

Slate Grey*

Tribute*

Nero

Ebony*#+

Note: Colour chart used as a guide only.

62

Colours are colourbond® equivalent. # Globalcote flexible pointing colours. + Not available in the Globalcote Infracote Range.

Facade & Roof Membranes & Coatings Synpave Sports & Rec Coating

Colour Mid Grey Slate Grey Tan

Size 15 litre 15 litre 15 litre

Protective Coatings

• A coloured water based, slip-resistant coating with excellent performance against wear/weathering. • Synpave Sports & Rec is recommended for use on driveways, walkways and similar areas around domestic, municipal, educational and commercial buildings. • It is also suitable for stair treads, decks, balconies, ramps and is easily repaired or recoated after thorough cleaning. • With correct preparation and priming Synpave Sports & Rec can be used on concrete, steel decking, asphalt and timber. • Available in a wide variety of colours, just ask at your local Bayset branch. Code 480-002 480-003 480-004

Waterproofing Products Australia WPA 230UV WPA 230UV is an elastomeric, one part, fibre reinforced, water based polyurethane membrane used for waterproofing shower recesses, bathrooms, laundries, decks, balconies and rooftops. Class 111 membrane as per AS 4858-2004 and AS 4654.1-2009. WPA230UV can be over coated with Protek Synpave Sports & Rec to achieve a pedestrian trafficable finish. Recommended for • Wet areas and shower recesses. • Balconies and deck areas. • Roof applications (maintenance traffic only). • Parapets and feature walls. Colour White Grey

Size 15 litre 15 litre

Dimension and specifications may change without notification.

Code 425-023 425-024

63

Protective Coatings

Heat Reflective Membranes Coatings Globalcote Infacote Heat Reflective Membrane

Protective Coatings

• Infracote reflects infrared radiation, reduces heat penetration, reduces carbon footprint, reduces cooling costs and reduces urban heat island effect. • Infracote Reflective Coating uses technology to reflect the sun’s radiation away from the roof. • It works by targeting the invisible infrared portion of the sun’s radiation which means coated surfaces stay cooler and last longer than a coating that absorbs it. • Available in 32 designer colours (colour chart refer to page 62).

Colour Various

Size 15 litre

Code 420-104

Mapei Aquaflex Roof HR • Ready to use fibre-filled liquid membrane with high solar reflectance and thermal emittance for external applications. • Made from synthetic resins in water dispersion. • Aquaflex Roof HR is resistant to all atmospheric conditions and UV rays and guarantees long-lasting protection for the substrate. • Easy to apply and, once dry, forms a strong, flexible, tack-free dry surface, suitable for occasional light foot traffic. • When used with Aquaflex primer, old bitumen membranes may also be coated with Aquaflex Root HR.

Colour White

64

Size 20 kg

Code 419-200

Sealers Aqua Mix® Sealers Choice® Gold - Rapid Cure Formula

Colour Clear Clear Clear Clear

Size 473ml 946ml 3.8 litre 19 litre

Protective Coatings

• A premium, no-sheen, natural look, water based, penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. • May also be used as a pre-grouting sealer, allows moisture vapour transmission. • Rapid cure formula protects in less than 4 hours. • Designed to achieve optimal penetration into dense, low-porosity surfaces. • Suitable for all natural stone surfaces, unglazed tiles, porcelain, clay pavers, concrete, brick, masonry and grout. • For interior and exterior use. Code 470-250 470-251 470-252 470-253

Bostik Dynacryl • A solvent based clear acrylic coating used as a protective and decorative coating for concrete and masonry. • Suitable for use on all types of structures whether they are new or old, providing a waterproof clear gloss finish that is hard wearing and durable.

Colour Clear Clear

Size 4 litre 20 litre

Code 470-151 470-152

Solutions Pristine-WB • Pristine WB is a water based, ready to use, water and oil repellent, impregnating sealer for natural stone and other porous masonry surfaces. • Suitable for unglazed terracotta, slate, granite, limestone, sandstone, travertine and concrete pavers. • Natural finish impregnating sealer. • BIO-Safe Technology™ Low VOC. • Suitable for interior and exterior. • Resistance to soiling and staining including tar and gum. • Long lasting oil and water repellency makes cleaning of surface easier. Colour Milky White Milky White Milky White

Size 1 litre 5 litre 20 litre

Dimension and specifications may change without notification.

Code 470-704 470-705 470-706

65

Protective Coatings

Sealers Solutions Silcopel-WB

Protective Coatings

• Silcopel WB is a water based, ready to use, silane/siloxane water repellent, VOC compliant, impregnating sealer for selected natural stone and porous masonry surfaces. • This product is suitable for concrete, bessa block, clay pavers, sandstone, some granites and other masonry surfaces. • Natural finish impregnating sealer. • BIO-Safe Technology™ Low VOC. • Suitable internal and external, mildew and fungus resistant. • Reduces efflorescence, spalling and salt damage. • Lond lasting water repellency makes cleaning easier. Colour Milky White Milky White Milky White

Size 1 litre 5 litre 20 litre

Code 470-707 470-708 470-709

Solutions Silcopel An invisible solvent based treatment for masonry surfaces which will preserve against the damaging effect of weather and reduce staining and efflorescence. Based on state of the art technology, Silcopel has been designed to chemically adhere to the pores within the substrate, reducing moisture uptake by up to 95%. • Gives a totally invisible finish, allows masonry to “breathe”. • Keeps masonry clean by reducing staining. • Premium, long-life, solvent-based product. • Prevents growth of fungi/moss by denying moisture to the structure. • Excellent resistance to freeze/thaw and ultra violet rays. Colour Clear Clear Clear Clear

Size 1 litre 4 litre 10 litre 20 litre

Code 470-116 470-115 479-810 479-811

Solutions Pristine • Natural Stone solvent based penetrating sealer. • It contains a carefully selected blend of solvents and resins which are renowned for durability. • These resins are deposited in the capillaries of porous surfaces, leaving a barrier against water and oil borne contaminants, with minimal change to the natural appearance of the surface. • Pristine is ideal for terracotta and other hard to keep clean porous surfaces. Colour Clear Clear Clear Clear Clear

66

Size 1 litre 4 litre 10 litre 20 litre 200 litre

Code 470-007 470-690 470-691 470-692 470-718

Sealers Solutions Quantum

Colour Clear Clear Clear Clear

Size 1 litre 4 litre 10 litre 20 litre

Protective Coatings

New Generation Stone Sealer is the ultimate stain protection for the professional applicator sealing porous stone, pavers and tiles. The stain protection and realistic long life of Quantum is specifically designed for the high performance market. • Penetrating breathable sealer, high repellance against oils, food products and water. • Minimal change to substrate appearance. • Over 90% reduction in water uptake, reducing moss and mould growth. • Excellent salt resistance, reduces salt efflorescence and freeze/thaw. • Slip tested - Council approved. • Bulk quantities available. Code 470-008 470-009 470-697 470-698

Solutions Silacryl Matt Sealer • A high performance solvent based sealer, designed to beautify and protect masonry surfaces. • Only quality acrylic resins are used in the manufacture of Silacryl to guarantee durability, • UV Protection and high gloss levels. • Silacryl is also widely regarded as one of the leading slate sealing products on the market. • Bulk quantities available. Colour Clear Clear Clear Clear

Size 1 litre 4 litre 10 litre 20 litre

Code 470-010 470-109 470-011 470-110

Solutions Silacryl Wet Look Sealer High performance solvent based sealer, designed to beautify and protect masonry surfaces. Only quality acrylic resins are used in the manufacture of Silacryl to guarantee durability, UV Protection and high gloss levels. Gives a wet look (gloss or matt) which enhances the natural colours of surfaces like slate and sandstone. • Suitable for internal and external use. • Seals against food, soils, grease, oil, etc., and inhibits staining. • Seals lime dust into concrete to prevent leaching and a constant need for sweeping. • Is easy to reseal without stripping, does not yellow externally. • Bulk quantities available Colour Clear Clear Clear Clear

Size 1 litre 4 litre 10 litre 20 litre

Dimension and specifications may change without notification.

Code 470-012 470-111 470-013 470-112

67

Protective Coatings

Sealers Solutions Plus Natural Sealer

Protective Coatings

A high solids, state of the art solvent based penetrating sealer, specifically designed for porous surfaces. It contains a carefully selected blend of solvents and resins which are renowned for durability. Suitable for internal and external use. • Premium long-life solvent-based product. Invisible finish which maintains a natural look. • Allows grout or tiles to “breathe”, which means sealing is possible without lengthy delays, higher solids makes it suitable for porous surfaces. • Protects against water-borne and oil-based stains, makes cleaning of tiles easy. Colour Clear Clear Clear Clear Clear

Size 1 litre 4 litre 10 litre 20 litre 200 litre

Code 470-014 470-015 470-126 470-016 470-017

Solutions Superseal Spray • This is not just convenient to use - it is an incredibly powerful sealant against stains, mildew and mould. • Whether it’s the grout and tile in a shower, the toilet bowl or the kitchen bench - Superseal will give premium, lasting protection to make ongoing cleaning a breeze.

Colour Clear

Size 300 g can

Code 470-130

Solutions Protex Porcelain & Dense Stone Sealer Protex Stone Sealer is a specialized penetrating sealer for treating low absorptive surfaces such as polished porcelain tiles. The small molecular structure of this sealer means that it penetrates into the microscopic pores of the tile and repels water and oil borne stains. • Suitable for internal and external use. • Invisible, impregnating material creates an excellent barrier against stains. • Allows tile to breathe. • Makes routine cleaning easier. • Bulk quantities available. Colour Clear Clear Clear Clear

68

Size 1 litre 4 litre 10 litre 20 litre

Code 470-020 470-693 470-694 470-699

Sealers Solutions Easi-Seal

Colour Clear Clear Clear

Size 1 litre 5 litre 20 litre

Protective Coatings

A penetrating sealer that can be applied 24 hours after laying of tiles or grout. Makes an excellent grout sealer or pre-grouting sealer on porous tiles. • Suitable for internal and external use. • Economical one coat application. • Invisible finish which maintains a natural look. • Allows grout or tiles to “breathe”, which means sealing is possible without lengthy delays. • Resists cement and grout stains, making it an excellent pre-grouting sealer. • Makes surfaces easier to clean and maintain. Code 490-022 490-245 490-246

Solutions Densify-K Concrete densifier for sealing, grinding and protection. Densify-K can be used for sealing warehouse floors, shopping centre car parks, heavy pedestrian and traffic areas. • DENSIFY-K will not turn concrete yellow, discolour, chip, peel or show unsightly wear patterns with use. • Will not tyre mark. • Increases the wear surface strength. • Penetrates the concrete surface to seal, densify & water proof.

Colour Clear Clear

Size 20 litre 200 litre

Code 470-034 470-035

Solutions Pavacryl Hard Coat Extra tough acrylic sealer especially designed for concrete and sandstone. Excellent resistance to heavy wear and ultra violet rays makes Pavacryl ideal for external high traffic areas such as industrial and residential driveways. • High solids content for ease of coverage over porous surfaces such as concrete and pavers. • Gives surface a glossy wet look, and enhances the natural colours of the surface. • Seals against food, soils, grease, oil, etc., and inhibits staining. • Seals lime dust into concrete to prevent leaching and a constant need for sweeping. • It is easy to reseal without stripping, does not yellow externally. Colour Size Code Clear 1 litre 470-686 Clear 4 litre 470-687 Clear 10 litre 470-688 Clear 20 litre 470-700 Clear 200 litre 470-689

Dimension and specifications may change without notification.

69

Protective Coatings

Sealers Solutions Infuse

Protective Coatings

Infuse is a impregnating colour enhancer with superior stain protection for use on natural stone, pavers and tiles. • Brilliant colour enhancement. • High repellency against oils, food products and water. • Penetrating sealer, UV stabilised for indoor and outdoor. • Very high acid resistance. • Stable in temperatures up to 200 degrees C. • Performs well in continuously wet environment. • Slip tested - Council approved. Colour Size Clear 1 litre Clear 4 litre Clear 10 litre Clear 20 litre

Code 470-117 470-118 470-119 470-120

Solutions Consolidate A state of the art protective sealer designed for porous surfaces such as sandstone and concrete. Consolidate penetrates into the pores to react with the substrate and become part of the structure. The sealer densifies and strengthens the substrate – increasing hardness and consolidating friable surfaces. • CSIRO tested, suitable for internal and external use, excellent salt resistance. • Greatly reduces efflorescence, breathable - allows moisture to dry out. • Strengthens soft or chalky surfaces, seals hairline cracks up to 0.3mm. Colour Clear Clear Clear Clear Clear

Size 1 litre 4 litre 10 litre 20 litre 200 litre

Code 470-121 470-122 470-123 470-124 470-125

Solutions Anti - Graffiti System • Comprising of two parts, a base coat and a top coat plus a graffiti removal solvent (B). • This system has been successfully used on government, commercial and residential buildings around Australia for many years.

Colour Clear Clear Clear Clear

70

Size 3 litre 9 litre 24 litre 44 litre

Code 470-682 470-683 470-684 470-685

Sealers Solutions Lock-Out

Colour Pearl Pearl Pearl

Size 1 litre 5 litre 20 litre

Protective Coatings

A permanent microscopic anti-fungal treatment that builds a defence barrier against mould, mildew and algae. • Biodegradable - no arsenic, tin or heavy metals. • Can be used on natural or silicone sealed surfaces. • Does not rub off. • Keeps landscaped walls and paths in pristine condition. • Positively charged barrier ruptures fungal membrane without diminishing Lock-Out’s protective ability.

Code 470-127 470-128 470-129

Protek Clear Coat Satin Finish • Unique water based clear finish suitable for internal application to parquetry and timber flooring and as a sealer for easier cleaning of external coatings including Synpave Sports & Rec in foot traffic areas.

Colour Clear Clear

Size 5 litre 20 litre

Code 470-021 470-369

Protek Clear Acrylic Sealer • Protek Clear Acrylic Sealer is a solvent borne single pack clear acrylic coating. • It is a general-purpose clear coating for stable substrates, which will enhance the colour and appearance of the coated material. • Protek Clear Acrylic Sealer is non-yellowing and is suitable for exterior and interior applications. • Protek Clear Acrylic Sealer meets the requirements of ASTM C-309 moisture vapour transmission of 0.055 gms/sq.cm/72 hours when tested in accordance with ASTM C-156.

Colour Clear

Size 20 litre

Dimension and specifications may change without notification.

Code 470-019

71

Protective Coatings

Curing Compounds Aftek Cureon A Water Based, Acrylic Membrane Curing Compound

Protective Coatings

Curecon A acrylic, water based curing compound is a Class D, Type 1 curing compound for use on new concrete that facilitates maximum moisture retention through the curing period to maximise concrete strength and durability. Curecon A, when applied by the correct method and at the recommended application rate, leaves a dried film, which is not particularly obvious. This film does not normally darken on exposure to sunlight. Curecon A is based on an acrylic resin combined with other additives. Curecon A is certified to comply with Australian Standard AS 3799. • Efficient curing of the concrete assists the development of strength, abrasion resistance and durability. • Reduces the likelihood of cracking or dusting at the surface. • Compatible with most after trades. • Easy to use, eliminates messy water curing or polythene film. • Complies with Green Star-Office Design V3 IEQ-13. • No ventilation requirement. • No stringent safety requirements. • Low odour.

Colour Clear Clear

Size 20 litre 200 litre

Code 495-106 495-107

Aftek Curecon PW - Smartwax A fast drying, shower resistant Class A water based wax curing compound used to retain moisture in concrete for effective curing. Used for all concrete but specifically designed for use in mass concrete structures such as roadwork, bridgework, civil construction and runways. Curecon PW Smartwax dries rapidly and becomes resistant to wash off in about 15 minutes after application. Curecon PW Smartwax contains a pink fugitive dye to ensure uniform application is achieved. Curecon PW dries to a clear film on the concrete surface. • Non-flammable; non toxic. • Rapid film formation. • Shower resistant at 15 minutes. • Reduces surface shrinkage and cracking by eliminating moisture loss from exposed surfaces. • Low VOC formula. • Meets Green Star rating – complies with Office Design V3-IEQ13. • Eliminates the need for damp hessian or polythene. • Increases concrete strength and dusting resistance.

Colour Clear Clear Clear

72

Size 20 litre 200 litre 1000 litre

Code 495-108 495-109 495-110

Curing Compounds Aftek Curecon AA Water Based, Aliphatic Alcohol Finishing Compound

Colour Pale Blue Pale Blue

Size 20 litre 200 litre

Protective Coatings

Curecon AA is a water based, aliphatic alcohol finishing compound designed for use on plastic (freshly poured and screeded) concrete, to reduce the evaporation of water during finishing operations. Curecon AA will not normally interfere with subsequent toppings, tiling, render, surface coatings etc. often used in industry. Please Note: Curecon AA is not a curing compound. Aftek Curecon W, W30, PW, PW30, BE or A are water based curing compounds complying with AS3799. • Water based. • Reduces evaporation of water from the concrete surface. • Improves finishing properties in adverse weather conditions. • Reduces shrinkage cracking through premature drying. • Does not interfere with following trades. • Appearance: Pale blue liquid. • Colour when dry: Dries clear specific gravity ~1.00. • Application rate: 5 - 7 m2 per litre.

Code 491-111 491-112

Aftek Stripform Oil Based Form Release Agent Stripform is an oil based form release agent specifically formulated for application to timber and steel formwork. • Economical. • Clean release. • Solvent free. • Easy application.

Colour Amber Amber

Size 20 litre 200 litre

Dimension and specifications may change without notification.

Code 491-113 491-114

73

• Premium penetrating sealer that provides maximum stain resistance • The NEW rapid cure formula protects in less than 4 hours • Low VOC, water-based product • Suitable for all Natural Stone & Tile Internal & External use • Inte

Smile Life

When life gives you a hundred reasons to cry, show life that you have a thousand reasons to smile

Get in touch

© Copyright 2015 - 2024 PDFFOX.COM - All rights reserved.