Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK
Westmoreland Mechanical Testing & Research Ltd Issue No: 021
2616 Accredited to ISO/IEC 17025:2005
Issue date: 21 January 2015
5 Beaumont Road
Contact: Mr M Steiger
Beaumont Road Industrial Estate
Tel: +44 (0)1295 261211
Banbury
Fax: +44 (0)1295 263096
Oxon
E-Mail:
[email protected]
OX16 1RH
Website: www.wmtr.co.uk
Testing performed by the Organisation at the locations specified Locations covered by the organisation and their relevant activities Laboratory locations: Location details
Activity
Location code
5 Beaumont Road Beaumont Road Industrial Estate Banbury Oxon OX16 1RH
Local contact: Mr M Steiger Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail:
[email protected] Website: www.wmtr.co.uk
Metals & Weldments - Chemical Metals & Weldments - Corrosion Metals & Weldments - Mechanical Metals & Weldments - Metallurgical Plastics and Composites – Mechanical & Physical Properties
A
19 Wildmere Road Banbury Oxfordshire OX16 3JU
Local contact: Mr M Steiger Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail:
[email protected] Website: www.wmtr.co.uk
Metals & Weldments - Mechanical Metals & Weldments - Metallurgical
B
Assessment Manager: AC1
Page 1 of 7
S c he dul e of Ac c r e di ta ti on issued by
United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Westmoreland Mechanical Testing & Research Ltd 2616
Issue No: 021
Issue date: 21 January 2015
Accredited to ISO/IEC 17025:2005 Testing performed by the Organisation at the locations specified
DETAIL OF ACCREDITATION Materials/Products tested
METALS, ALLOYS and METAL PRODUCTS
Type of test/Properties measured/Range of measurement
Standard specifications/ Equipment/Techniques used
Location Code
Chemical Tests Elemental analysis
Aluminium and aluminium alloys
Si, Fe, Cu, Mn, Mg, Zn, Ni, Cr, Pb, Sn, Ti, Be, Bi, Ca, Cd, Ga, Na, P, Sb, Sr, Li, V, Zr
Documented in-house method WMTR/QTP/OES001 using OES
A
Carbon steels, low alloy steels, stainless steels
C, Si, Mn, P, S, Cr, Mo, Ni, Al, Co, Cu, Nb, Ti, V, W, Pb, Sn, As, Zr, Ca, Sb, B
A
Cobalt alloys
Al, B, C, Cr, Cu, Fe, Mg, Mn, Mo, Nb, Ni, P, S, Si, Sn, Ti, V, W, Zr
A
Titanium and titanium alloys
Al, Cr, Fe, Mo, Ni, Si, Sn, V
A
Corrosion Tests Aluminium alloys
Intergranular corrosion
BS EN 1975:2000 Annex A ISO 7866:1999 Annex A ASTM G110-92
A
Alternate Immersion Stress Corrosion (Including preparation of samples)
ASTM G44-99(2013) ASTM G47-98(2001) ASTM G38-01(2007) ASTM G49-85(2011)
A
Salt Spray (Fog)
ASTM B117-11
A
Mechanical Tests Aluminium foil
Assessment Manager: AC1
Tensile
ASTM E345-1993
A/B
Plastic strain ratio (r) Strain hardening exponent (n)
ASTM E517-00 ASTM E646-07
A/B
Page 2 of 7
S c he dul e of Ac c r e di ta ti on issued by
United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Westmoreland Mechanical Testing & Research Ltd 2616
Issue No: 021
Issue date: 21 January 2015
Accredited to ISO/IEC 17025:2005 Testing performed by the Organisation at the locations specified
Materials/Products tested
METALS, ALLOYS and METAL PRODUCTS (cont’d)
Type of test/Properties measured/Range of measurement
Standard specifications/ Equipment/Techniques used
Location Code
Mechanical Tests (cont’d) Tensile (forces 1kN to 500 kN and temperature - ambient to 1000°C)
ASTM E8-09 ASTM E8M-09 ASTM A370-11 ASTM B557/557M-10 BS EN ISO 6892-1:2009 BS 4A4-1:Section 1:1966 BS EN 2002-1:2005 BS EN ISO6892-2:2011 ASTM E21-09 BS EN 2002-2:2005
A/B
Youngs Modulus, Tangent Modulus and Chord Modulus
ASTM E111-04
A/B
Bend Testing
Documented in-house method WMTR/QTP/EM007
A/B
Compression Testing
ASTM E9-09
A/B
Pin - Type Bearing test
ASTM E238-84 (2002)
A/B
Double shear
ASTM B769-07
A/B
Shear
ASTM B831-05
A/B
Fatigue crack growth (forces up to 250 kN and temperature - ambient to 1000°C)
ASTM E647-11
A
Fracture toughness (KIC)
ASTM E399-09
A/B
K1C, CTOD, J
BS 7448-1:1991
A/B
CTOD
ASTM E1290-08
A/B
Fracture Mechanics:
Assessment Manager: AC1
Page 3 of 7
S c he dul e of Ac c r e di ta ti on issued by
United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Westmoreland Mechanical Testing & Research Ltd 2616
Issue No: 021
Issue date: 21 January 2015
Accredited to ISO/IEC 17025:2005 Testing performed by the Organisation at the locations specified
Materials/Products tested
METALS, ALLOYS and METAL PRODUCTS (cont’d)
Type of test/Properties measured/Range of measurement
Standard specifications/ Equipment/Techniques used
Location Code
Mechanical Tests (cont’d) Fatigue: Constant amplitude fatigue
BS EN 6072:2010
A/B
High cycle & low cycle fatigue under force control (forces up to 500kN) (temperature ambient to 1000°C)
BS 3518-3:1963 ASTM E466-07
A/B
High cycle & low cycle fatigue under force control (forces up to 500kN) (temperature ambient to 1000°C)
BS 3518-3:1963 ASTM E466-07
A/B
High cycle fatigue (temperature - ambient to 1000°C)
BS EN 3987:2009
A/B
Low cycle fatigue under force control (temperature - ambient to 800°C)
prEN 3874:Ed P1, April 1998
A/B
Low cycle fatigue under strain control (ambient temperature)
BS 7270: 2006
A
Low cycle fatigue under strain control (temperature ambient to 1000°C)
ASTM E606-04
A
Rotating bend fatigue
BS EN ISO 1143:2010
A/B
Impact:
Assessment Manager: AC1
Charpy V - notch ° (temperature -196°C to 100 C)
ASTM E23-07ae1 ASTM A370-11
B
Izod
BS 131-1:1961
B
Page 4 of 7
S c he dul e of Ac c r e di ta ti on issued by
United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Westmoreland Mechanical Testing & Research Ltd 2616
Issue No: 021
Issue date: 21 January 2015
Accredited to ISO/IEC 17025:2005 Testing performed by the Organisation at the locations specified
Materials/Products tested
METALS, ALLOYS and METAL PRODUCTS (cont’d)
Type of test/Properties measured/Range of measurement
Standard specifications/ Equipment/Techniques used
Location Code
Mechanical Tests (cont’d) Hardness: Brinell (10/3000 HBW)
ASTM E10-10
A
Rockwell (HRB & HRC)
ASTM E18-08b
B
Micro-hardness (HV 0.2, 0.3, 0.5, 1 & HK 0.5, 1)
ASTM E384-11
B
Vickers (HV5, HV10, HV30)
ASTM E384-11
B
Documented In-house Method WMTR/QTP/EM003
A
Depth of decarburisation
ASTM E1077-01
B
Average grain size
ASTM E1382-97 (automatic & semi-automatic methods) ASTM E112-10
B
Largest grain
ASTM E930-99
B
Hydrogen embrittlement
ASTM F519-10
B
Inclusion content
ASTM E45-11 (Method D)
B
Microstructure of graphite in iron castings
ASTM A247-10
B
Alpha Case in Titanium
Documented In-house Method WMTR/QTP/MOG024
B
Physical Tests: Surface roughness (Ra) Metallurgical Tests:
Assessment Manager: AC1
Page 5 of 7
S c he dul e of Ac c r e di ta ti on issued by
United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Westmoreland Mechanical Testing & Research Ltd 2616
Issue No: 021
Issue date: 21 January 2015
Accredited to ISO/IEC 17025:2005 Testing performed by the Organisation at the locations specified
Materials/Products tested
PLASTICS & REINFORCED PLASTIC COMPOSITES
Assessment Manager: AC1
Type of test/Properties measured/Range of measurement
Standard specifications/ Equipment/Techniques used
Location Code
Mechanical Tests Compressive properties
ASTM D695-10 prEN 6036:1995
A
Compressive residual strength properties
ASTM D7137/D7137M-12 prEN6038:1995
A/B
In-plane shear
BS EN ISO 14129:1998 ASTM D3518/D3518M-94
A/B
Tensile
BS EN 2561:1995 ASTM D3039/3039M-08 prEN6035:1995
A/B
Apparent interlaminar shear strength
BS EN 2563:1997
A/B
Flexural
ASTM D790-10
A/B
Tension fatigue
ASTM D3479/D3479M-12
A/B
Tensile
BS EN ISO 527-1:1996 BS 2782-3 Method 321:1994 BS EN ISO 527-2:1996 BS 2782-3 Method 322:1994 BS EN ISO 527-4:1997 BS 2782-3 Method 326F:1997 BS EN ISO 527-5:1997 BS 2782-3 Method 326G:1997 ASTM D638-10
A/B
Page 6 of 7
S c he dul e of Ac c r e di ta ti on issued by
United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK
Westmoreland Mechanical Testing & Research Ltd 2616
Issue No: 021
Issue date: 21 January 2015
Accredited to ISO/IEC 17025:2005 Testing performed by the Organisation at the locations specified
Materials/Products tested
METALS, ALLOYS and METAL PRODUCTS
Type of test/Properties measured/Range of measurement
Standard specifications/ Equipment/Techniques used
Location Code
Tests codes:Ambient temperature tensile (A) Elevated temperature tensile (B) Instrumented chemistry (F) Metallography - micro (L) Hardness testing (M) Impact Testing (N) High cycle fatigue (O) Low cycle fatigue (Y) Fracture toughness (P) Crack propagation (XE) Hydrogen embrittlement (XN)
GE Aviation S-400 (31 Oct 2007)
END
Assessment Manager: AC1
Page 7 of 7