VEL TECH HIGH TECH Dr.RANGARAJAN Dr.SAKUNTHALA ENGINEERING COLLEGE (Owned by Vel Trust 1997) Approved by AICTE, New Delhi & Govt. of Tamilnadu & Affiliated to Anna University
SYLLABUS WEEKLY SCHEDULE SEMESTER VII DEPARTMENT OF CIVIL ENGINEERING 4 YEAR COURSE # 60, Avadi-Alamathi Road, Chennai-600 062. Phone:26840181 E-mail :
[email protected] Website: www.vel-tech.org
DEPARTMENT OF CIVIL ENGINEERING
DEPARTMENT OF CIVIL ENGINEERING
30
1
CE 6712 - DESIGN PROJECT OBJECTIVE: The objective of this course is to impart and improve the design capability of the student. This course conceives purely a design problem in any one of the disciplines of Civil Engineering; e.g., Design of an RC structure, Design of a waste water treatment plant, Design of a foundation system, Design of traffic intersection etc. The design problem can be allotted to either an individual student or a group of students comprising of not more than four. At the end of the course the group should submit a complete report on the design problem consisting of the data given, the design calculations, specifications if any and complete set of drawings which follow the design. WEEK – 1 REVIEW – 1 PROJECT WORK WEEK – 2 PROJECT REVIEW – 1 WEEK – 3 REVIEW – 2 PROJECT WORK WEEK – 4 REVIEW – 2 PROJECT WORK WEEK – 5 PROJECT REVIEW – 2 WEEK – 6 REVIEW – 3 PROJECT WORK WEEK – 7REVIEW – 3 PROJECT WORK WEEK – 8 PROJECT REVIEW – 3 WEEK – 9 REVIEW – 4 PROJECT WORK WEEK – 10 REVIEW – 4 PROJECT WORK WEEK – 11 PROJECT REVIEW – 4 WEEK – 12 REPORT PREPARATIONS WEEK – 13 REPORT PREPARATIONS
MISSION OF THE INSTITUTION “To raise the quality of Education and Research of the institution and to emerge as a National/International Center of Excellence.”
“To produce employable students at National/International level by imparting adequate skills through continuous up gradation of curriculum and effective teaching - learning methodologies.”
“To create the best condition for professional success and quality of life for all students.”
VISION OF THE INSTITUTION Right from the inception of the institution, we strive to achieve the high standards that we had set for ourselves. We aim to excel in our work and bring out the best in our students. ‘To breed TOTAL: 60 PERIODS
excellence in everything we do and everything we are’ is our
golden rule. With our eyes firmly set on this ideal, we continue
economical and social development in state, national and global
our journey of imparting knowledge.
level.
MISSION OF THE DEPARTMENT
To educate, inspire and mentor 2future civil engineering Technocrats for meeting the 21st Century challenges in Civil Engineering.
To create, disseminate and integrate knowledge through quality teaching practices for solving real world problems.
To provide innovating thinking, quantitative reasoning, attitude and skills in research for building the nations.
VISION OF THE DEPARTMENT The vision of Civil Engineering Department is committed to the highest degree of credibility in assurance of quality and relevance of professional education with research in various civil engineering disciplines to fulfill the expectation of stakeholders. The civil Engineering will ensure the excellent contribution in the
WEEK – 9 Detailing of rectangular water tanks
29
WEEK – 10 Design of plate girder bridge WEEK – 11 Twin Girder deck type railway bridge WEEK – 12 Truss Girder bridges WEEK – 13 Detailed Drawings including connections TOTAL: 60 PERIODS TEXT BOOKS 1. Krishna Raju, “Structural Design & Drawing (Concrete & Steel)”, CBS Publishers 2004. 2. Punmia, B.C., Ashok Kumar Jain, Arun Kumar Jain, “Design of steel structures”, Lakshmi publications Pvt. Ltd 2003. REFERENCES 1. Krishnamurthy, D., “Structural Design & Drawing – Vol. II”, CBS Publishers & Distributors, Delhi 1992.
DEPARTMENT OF CIVIL ENGINEERING 2. Krishnamurthy, D., “Structural Design & Drawing – Vol. III Steel Structures”, CBS Publishers & Distributors, New Delhi 1992. EXAMINATION DURATION : 4 HOURS
DEPARTMENT OF CIVIL ENGINEERING WEEK – 6 RCC Tee beam bridges for IRC loading and reinforcement details WEEK – 7 Design and drafting of Intz type water tank WEEK – 8 Detailing of circular water tanks
CE 6711 - COMPUTER AIDED DESIGN & DRAFTING LABORATORY
PROGRAMME EDUCATIONAL 3 OBJECTIVES
28
OBJECTIVE At the end of the course the student acquires hands on experience in design and preparation of structural drawings for concrete / steel structures normally encountered in Civil Engineering practice. WEEK – 1 Design and drawing of RCC cantilever WEEK – 2 Design and drawing of counterfort type retaining walls with reinforcement details WEEK – 3 Design and drawing of counterfort type retaining walls with reinforcement details WEEK – 4 Design of solid slab WEEK – 5 RCC Tee beam bridges for IRC loading and reinforcement details
1. To provide students with basic knowledge both theoretical and practical in core areas of Engineering. 2. Adapt and learn future advanced methods. 3. Apply knowledge, strong reasoning and quantitative skills to real world problems in Civil Engineering. 4. To train the students to excel in their academic activities. 5. To
make
significant
contributions
when
working
independently and with a team on assignment or research. 6. To enable students to develop skills in communication. 7. To inculcate within students the ethical, social and moral issues. 8. To train the students for placement and higher education.
g. Graduates have the attitude to display the professional responsibilities by meeting ethical standards. h. Graduates attained the familiarity with modern civil engineering professional software tools and applying them for the solution of design situations they face.
PROGRAM OUTCOMES (PO’S) a. Graduates have ability to demonstrate a sound knowledge of basic concepts in civil engineering discipline.
i.
Graduates have the confidence to apply various engineering solutions addressing social concerns.
j.
Graduates have the knowledge to use the techniques and skills necessary for civil engineering practice and clearly understand the value of lifelong learning.
b. Graduates have ability to demonstrate to improve analytical ability and design civil engineering structures following specifications. c. Graduates have the ability to identify problems and find solutions for them in the most cost4effective manner. d. Graduates have the ability to conduct practical tests, interpret the results and report them in a professional format. e. Graduates have the capacity as productive members of interdisciplinary design teams. f. Graduates have the able to communicate in both verbal and written forms and make effective presentations.
REVISION & MODEL EXAM
27
WEEK – 14 REVISION & MODEL EXAM WEEK – 15 REVISION & MODEL EXAM TOTAL: 45 PERIODS TEXT BOOKS 1. George Tchobanoglous et.al., “Integrated Management”, McGraw-Hill Publishers, 1993.
Solid
Waste
DEPARTMENT OF CIVIL ENGINEERING 2. B.Bilitewski, G.HardHe, K.Marek, A.Weissbach, H.Boeddicker, “Waste Management”, Springer, 1994.
DEPARTMENT OF CIVIL ENGINEERING and
REFERENCES 1. Manual on Municipal Solid Waste Management, CPHEEO, Ministry of Urban Development, Government of India, New Delhi, 2000 2. R.E.Landreth and P.A.Rebers, “Municipal Solid Wastes – problems and Solutions”, Lewis Publishers, 1997. 3. Bhide A.D. and Sundaresan, B.B., “Solid Waste Management in Developing Countries”, INSDOC, 1993.
UNIT IV OFF-SITE PROCESSING Processing techniques and Equipment; WEEK – 9 PRE-MODEL EXAM Resource recovery from solid wastes WEEK – 10 Composting, incineration, Pyrolysis WEEK – 11 UNIT TEST - 4 Options under Indian conditions. UNIT V DISPOSAL Dumping of solid waste; WEEK – 12 UNIT TEST - 4 Sanitary landfills – site selection, design and operation of sanitary landfills WEEK – 13 Leach ate collection & treatment
WEEK – 6 UNIT TEST - 2 UNIT III COLLECTION AND TRANSFER 26 – Methods of Collection – types of vehicles WEEK – 7 Manpower requirement – collection routes; transfer stations – selection of location, operation & maintenance; WEEK – 8 Options under Indian conditions. PRE-MODEL EXAM
ODD SEMESTER WEEK 2016-2017 5 S.NO
WEEK
FROM
TO
1
WEEK 1
24/6/16
25/6/16
2
WEEK 2
26/6/16
2/7/16
3
WEEK 3
3/7/16
9/7/16
4
WEEK 4
10/7/16
16/7/16
5
WEEK 5
17/7/16
23/7/16
6
WEEK 6
24/7/16
30/7/16
4
CE6007
HOUSING PLANNING AND MANAGEMENT
7
WEEK 7
31/7/16
6/8/16
8
WEEK 8
7/8/16
13/8/16
5
EN6501
MUNICIPAL SOLID WASTE MANAGEMENT
9
WEEK 9
14/8/16
20/8/16
10
WEEK 10
21/8/16
27/8/16
11
WEEK 11
28/8/16
3/9/16
12
WEEK 12
4/9/16
10/9/16
13
WEEK 13
11/9/16
17/9/16
14
WEEK 14
18/9/16
24/9/16
15
WEEK 15
25/9/16
1/10/16
16
WEEK 16
2/10/16
8/10/16
17
WEEK 17
9/10/16
15/10/16
18
WEEK 18
16/10/16
22/10/16
19
WEEK 19
23/10/16
29/10/16
PRACTICAL S.N O
SUBJECT CODE
1
CE6711
COMPUTER AIDED DESIGN & DRAFTING LABORATORY
2
CE6712
DESIGN PROJECT
3
CE6713
ESTIMATION AND QUANTITY SURVEYING
SUBJECT NAME
THEORY S.N O
SUBJECT CODE
1
CE6701
2
CE6702
3
CE6703
SUBJECT NAME STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING PRESTRESSED CONCRETE STRUCTURES WATER RESOURCES AND IRRIGATION ENGINEERING 6
25
DEPARTMENT OF CIVIL ENGINEERING
EN6501 - MUNICIPAL SOLID WASTE MANAGEMENT OBJECTIVE: This subject covers the various sources and characterisation of municipal solid wastes and the on-site/off-site processing of the same and the disposal methods. The student is expected to know about the various effects and disposal options for the municipal solid waste. WEEK – 1 UNIT I SOURCES AND TYPES OF MUNICIPAL SOLID WASTES Sources and types of solid wastes - Quantity – factors affecting generation of solid wastes; characteristics – methods of sampling and characterization; WEEK – 2 Effects of improper disposal of solid wastes – public health effects. Principle of solid waste management – social & economic aspects; Public awareness; WEEK – 3 Role of NGOs; Legislation. UNIT TEST - 1 WEEK – 4 UNIT TEST - 1 UNIT II ON-SITE STORAGE & PROCESSING On-site storage methods – materials used for containers – on-site segregation of solid wastes WEEK – 5 Public health & economic aspects of storage – options under Indian conditions – Critical Evaluation of Options.
DEPARTMENT OF CIVIL ENGINEERING WEEK – 13 Pricing o f Housing Units, Rents, Recovery Pattern (Problems). REVISION & MODEL EXAM WEEK – 14 REVISION & MODEL EXAM WEEK – 15 REVISION & MODEL EXAM TOTAL: 45 PERIODS TEXT BOOKS 1. Meera Mehta and Dinesh Mehta, Metropolitan Housing Markets, Sage Publications Pvt. Ltd., New Delhi, 1999. 2. Francis Cherunilam and Odeyar D Heggade, Housing in India, Himalaya Publishing House, Bombay, 1997. REFERENCES 1. Development Control Rules for Chennai Metropolitan Area, CMA, Chennai, 2002. 2. UNCHS, National Experiences with Shelter Delivery for the Poorest Groups, UNCHS (Habitat), Nairobi, 1994. 3. National Housing Policy, 1994, Government of India.
24 UNIT TEST – 1
S.NO
SUBJECT CODE
1
CE6701
2
CE6702
3
CE6703
4
CE6007
5
EN6501
SUBJECT NAME STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING PRESTRESSED CONCRETE STRUCTURES WATER RESOURCES AND IRRIGATION ENGINEERING HOUSING PLANNING AND MANAGEMENT MUNICIPAL SOLID WASTE MANAGEMENT
SUBJECT CODE
1
CE6701
2
CE6702
3
CE6703
SUBJECT NAME STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING PRESTRESSED CONCRETE STRUCTURES WATER RESOURCES AND
CE6007
5
EN6501
2-8-2016(AN) 1-8-2016 (AN)
DATE 14-7-2016 (AN)
PRE – MODEL EXAM
16-7-2016 (FN) 15-7-2016 (AN)
S.NO
SUBJECT CODE
15-7-2016 (FN)
1
CE6701
14-7-2016 (FN)
2
CE6702
3
CE6703
4
CE6007
5
EN6501
UNIT TEST – 2 S.NO
4
IRRIGATION ENGINEERING HOUSING PLANNING AND MANAGEMENT MUNICIPAL SOLID WASTE 7 MANAGEMENT
SUBJECT NAME STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING PRESTRESSED CONCRETE STRUCTURES WATER RESOURCES AND IRRIGATION ENGINEERING HOUSING PLANNING AND MANAGEMENT MUNICIPAL SOLID WASTE MANAGEMENT
DATE 1-8-2016 (FN) 3-8-2016 (FN) 2-8-2016 (FN)
UNIT TEST – 4
DATE 3-9-2016 6-9-2016 7-9-2016 8-9-2016 9-9-2016
DEPARTMENT OF CIVIL ENGINEERING
SUBJECT S.NO CODE 1
CE6701
2
CE6702
3
CE6703
4
CE6007
5
EN6501
SUBJECT NAME
DEPARTMENT OF CIVIL ENGINEERING
DATE
STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING PRESTRESSED CONCRETE STRUCTURES WATER RESOURCES AND IRRIGATION ENGINEERING HOUSING PLANNING AND MANAGEMENT MUNICIPAL SOLID WASTE MANAGEMENT
WEEK – 6 UNIT TEST - 2 UNIT III PLANNING AND DESIGN8 OF HOUSING PROJECTS Formulation of Housing Projects WEEK – 7 Site Analysis, Layout Design, WEEK – 8 Design of Housing Units(Design Problems) PRE-MODEL EXAM UNIT IV CONSTRUCTION TECHNIQUES AND COST-EFFECTIVE MATERIALS New Constructions Techniques WEEK – 9 Cost Effective Modern Construction Materials, Building Centers
WEEK – 10 Concept, Functions and Performance Evaluation WEEK – 11 UNIT TEST - 4 Concept, Functions and Performance Evaluation UNIT V HOUSING FINANCE AND PROJECT APPRAISAL Appraisal of Housing Projects WEEK – 12 UNIT TEST - 4 Housing Finance, Cost Recovery – Cash Flow Analysis, Subsidy and Cross Subsidy
CE 6007 - HOUSING PLANNING AND MANAGEMENT 23
OBJECTIVE: The objective of the course is to train the students to have a Comprehensive knowledge of planning, design, evaluation, construction and financing of housing projects. The course focuses on cost effective construction materials and methods. Emphasis has also been given on the principles of sustainable housing policies and programmes. WEEK – 1 UNIT I INTRODUCTION TO HOUSING Definition of Basic Terms – House, Home, Household, Apartments, Multi storeyed Buildings, Special Buildings, Objectives and Strategies of National Housing Policies, Principle of Sustainable Housing, Housing Laws at State level WEEK – 2
Bye-laws at Urban and Rural Local Bodies – levels - Development Control Regulations, Institutions for Housing at National, State and Local levels WEEK – 3 UNIT TEST - 1 UNIT II HOUSING PROGRAMMES Basic Concepts, Contents and Standards for Housing Programmes - Sites and Services, Neighborhoods WEEK – 4 UNIT TEST - 1 Open Development Plots, Apartments, Rental Housing, Co-operative Housing, Slum Housing Programmes WEEK – 5 Role of Public, Private and Non-Government Organizations
22 MODEL EXAM S.NO
SUBJECT CODE
1
CE6701
2
CE6702
3
CE6703
SUBJECT NAME STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING PRESTRESSED CONCRETE STRUCTURES WATER RESOURCES AND IRRIGATION ENGINEERING
4
CE6007
5
EN6501
HOUSING PLANNING AND MANAGEMENT MUNICIPAL SOLID WASTE MANAGEMENT
6-10-2016 7-10-2016
MODEL PRACTICAL EXAM S.NO
SUBJECT CODE
SUBJECT NAME
1
CE6711
COMPUTER AIDED DESIGN & DRAFTING LABORATORY (BATCH-1)
2
CE6712
DESIGN PROJECT (BATCH-I)
3
CE6713
4
CE6711
5
CE6712
6
CE6713
ESTIMATION AND QUANTITY SURVEYING (BATCH-I) COMPUTER AIDED DESIGN & DRAFTING LABORATORY (BATCH-II) 9 DESIGN PROJECT(BATCH- II) ESTIMATION AND QUANTITY SURVEYING (BATCH-II)
DATE 26-9-2016 (FN) 28-9-2016 (FN) 27-9-2016 (FN) 26-9-2016(AN) 28-9-2016(AN) 27-9-2016 (AN)
DATE 3-10-2016 4-10-2016 5-10-2016
CE6701 – STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING OBJECTIVE: The main objective of the course is to introduce dynamic loading and the dynamic performance of the structures to the students.
DEPARTMENT OF CIVIL ENGINEERING Different types of dynamic loading also to be discussed. The detailed study on the performance of structures under earthquake loading is also one of the focus of the course. UNIT I THEORY OF VIBRATIONS 9 WEEK – 1 Difference between static loading and dynamic loading - Degree of freedom – idealisation of structure as single degree of freedom system WEEK – 2 Formulation of Equations of motion of SDOF system - D‟Alemberts principles – effect of damping WEEK – 3 Free and forced vibration of damped and undamped structures Response to harmonic and periodic forces. UNIT TEST - 1 UNIT II MULTIPLE DEGREE OF FREEDOM SYSTEM 12 Two degree of freedom system – modes of vibrations – formulation of equations of motion of multi degree of freedom (MDOF) system WEEK – 4 Eigen values and Eigen vectors – Response to free and forced vibrations damped and undamped MDOF system – Modal superposition methods WEEK – 5 UNIT III ELEMENTS OF SEISMOLOGY Elements of Engineering Seismology - Causes of Earthquake – Plate Tectonic theory – Elastic rebound Theory – Characteristic of earthquake WEEK – 6 Estimation of earthquake parameters - Magnitude and intensity of earthquakes – Spectral Acceleration WEEK – 14 REVISION & MODEL EXAM WEEK – 15 REVISION & MODEL EXAM
DEPARTMENT OF CIVIL ENGINEERING TOTAL: 45 PERIODS TEXT BOOKS 1. Krishna Raju N., Prestressed concrete, Tata McGraw Hill Company, New Delhi 1998 2. Mallic S.K. and Gupta A.P., Prestressed concrete, Oxford and IBH publishing Co. Pvt.Ltd. 1997. 3. Rajagopalan, N, “Prestressed Concrete”, Alpha Science, 2002 REFERENCES 1. Ramaswamy G.S., Modern prestressed concrete design, Arnold Heinimen, New Delhi, 1990 2. Lin T.Y. Design of prestressed concrete structures, Asia Publishing House, Bombay 1995. 3. David A.Sheppard, William R. and Philips, Plant Cast precast and prestressed concrete – A design guide, McGraw Hill, New Delhi 1992.
10
21 WEEK – 7
Effect of earthquake on different type of structures – Behaviour of Reinforced Cement Concrete, Steel and Prestressed Concrete Structure under earthquake loading WEEK – 8 Pinching effect – Bouchinger Effects – Evaluation of earthquake forces as per IS:1893 – 2002 WEEK - 9 PRE – MODEL EXAMINATIONS Response Spectra – Lessons learnt from past earthquakes. WEEK - 10 UNIT V DESIGN METHODOLOGY Causes of damage – Planning considerations / Architectural concepts as per IS:4326 – 1993 WEEK - 11 Guidelines for Earthquake resistant design – Earthquake resistant design for masonry UNIT TEST - 4
UNIT III COLLECTION AND TRANSFER Methods of Collection – types of vehicles – WEEK – 7 Manpower requirement – collection routes; transfer stations – selection of location, operation & maintenance; WEEK – 8 Options under Indian conditions. PRE-MODEL EXAM UNIT IV OFF-SITE PROCESSING Processing techniques and Equipment; WEEK – 9 PRE-MODEL EXAM Resource recovery from solid wastes WEEK – 10 Composting, incineration, Pyrolysis
WEEK - 12 UNIT TEST - 4 Reinforced Cement Concrete buildings – Later load analysis
WEEK – 11 UNIT TEST - 4 Options under Indian conditions. UNIT V DISPOSAL Dumping of solid waste;
WEEK – 13 UNIT TEST - 4 Design and detailing as per IS:13920 – 1993.
WEEK – 12 UNIT TEST - 4 Sanitary landfills – site selection, design and operation of sanitary landfills
WEEK – 14 REVISON & MODEL EXAMINATION
WEEK – 13 Leach ate collection & treatment
WEEK – 15 REVISON & MODEL EXAMINATION UNIT TEST - 2
.
20
CE 6702 - PRESTRESSED 11 CONCRETE STRUCTURE
DEPARTMENT OF CIVIL ENGINEERING OBJECTIVE: At the end of this course the student shall have a knowledge of methods of prestressing, advantages of prestressing concrete, the losses involved and the design methods for prestressed concrete elements under codal provisions.
DEPARTMENT OF CIVIL ENGINEERING UNIT TEST - 2 UNIT III CIRCULAR PRESTRESSING Design of prestressed concrete tanks WEEK – 7 Design of prestressed concrete tanks
WEEK – 1 UNIT I INTRODUCTION – THEORY AND BEHAVIOUR Basic concepts – Advantages – Materials required – Systems and methods of prestressing – Analysis of sections – Stress concept – Strength concept – Load balancing concept
WEEK – 8 Pipes PRE-MODEL EXAMINATION UNIT IV COMPOSITE CONSTRUCTION Analysis for stresses
WEEK – 2 Effect of loading on the tensile stresses in tendons – Effect of tendon profile on deflections – Factors influencing deflections – Calculation of deflections
WEEK – 9 PRE-MODEL EXAMINATION Estimate for deflections
WEEK – 3 Short term and long term deflections - Losses of prestress – Estimation of crack width UNIT TEST - 1 UNIT II DESIGN CONCEPTS Flexural strength – Simplified procedures as per codes WEEK – 4 UNIT TEST - 1 Strain compatibility method – Basic concepts in selection of cross section for bending – stress distribution in end block, Design of anchorage zone reinforcement WEEK – 5 Limit state design criteria – Partial prestressing – Applications.
12
WEEK – 10 Flexural and shear strength of composite members WEEK – 11 Flexural and shear strength of composite members UNIT TEST - 4 UNIT V PRE-STRESSED CONCRETE BRIDGES General aspects WEEK – 12 UNIT TEST - 4 Pretensioned prestressed bridge decks WEEK – 13 Post tensioned prestressed bridge decks – Principles of design only. REVISION & MODEL EXAM
19
CE 2039 - MUNICIPAL SOLID WASTE MANAGEMENT OBJECTIVE: 18 This subject covers the various sources and characterisation of municipal solid wastes and the on-site/off-site processing of the same and the disposal methods. The student is expected to know about the various effects and disposal options for the municipal solid waste. WEEK – 1 UNIT I SOURCES AND TYPES OF MUNICIPAL SOLID WASTES Sources and types of solid wastes - Quantity – factors affecting generation of solid wastes; characteristics – methods of sampling and characterization; WEEK – 2 Effects of improper disposal of solid wastes – public health effects. Principle of solid waste management – social & economic aspects; Public awareness;
WEEK – 6 UNIT TEST - 2 13 UNIT III PLANNING AND DESIGN OF HOUSING PROJECTS Formulation of Housing Projects WEEK – 7 Site Analysis, Layout Design, WEEK – 8 Design of Housing Units(Design Problems) PRE-MODEL EXAM UNIT IV CONSTRUCTION TECHNIQUES AND COST-EFFECTIVE MATERIALS New Constructions Techniques WEEK – 9 Cost Effective Modern Construction Materials, Building Centers
WEEK – 3 Role of NGOs; Legislation. UNIT TEST - 1
WEEK – 10 Concept, Functions and Performance Evaluation
WEEK – 4 UNIT TEST - 1 UNIT II ON-SITE STORAGE & PROCESSING On-site storage methods – materials used for containers – on-site segregation of solid wastes
WEEK – 11 UNIT TEST - 4 Concept, Functions and Performance Evaluation UNIT V HOUSING FINANCE AND PROJECT APPRAISAL Appraisal of Housing Projects
WEEK – 5 Public health & economic aspects of storage – options under Indian conditions – Critical Evaluation of Options.
WEEK – 12 UNIT TEST - 4 Housing Finance, Cost Recovery – Cash Flow Analysis, Subsidy and Cross Subsidy
DEPARTMENT OF CIVIL ENGINEERING
CE6703 WATER RESOURCES AND IRRIGATION ENGINEERING OBJECTIVES: The student is exposed to different phases 14 in Water Resources Management and National Water Policy. Further they will be imparted required knowledge on Reservoir planning, management and economic analysis including Irrigation and Irrigation management practices. WEEK 1 UNIT I WATER RESOURCES Water resources survey – Water resources of India and Tamilnadu – Description of water resources planning WEEK 2 Estimation of water requirements for irrigation and drinking- Single and multipurpose reservoir WEEK 3 Multi objective - Fixation of Storage capacity -Strategies for reservoir operation - Design flood-levees and flood walls. WEEK 4 UNIT II WATER RESOURCE MANAGEMENT Economics of water resources planning; – National Water Policy – Consumptive and non- consumptive water use WEEK 5 Water quality – Scope and aims of master plan - Concept of basin as a unit for development WEEK 6 Water budget- Conjunctive use of surface and ground water
DEPARTMENT OF CIVIL ENGINEERING WEEK 7 UNIT III IRRIGATION ENGINEERING Need – Merits and Demerits – Duty, Delta and Base period – Irrigation efficiencies – Crops and Seasons - Crop water Requirement – Estimation of Consumptive use of water. WEEK 8 17 UNIT IV CANAL IRRIGATION Types of Impounding structures: Gravity dam – Diversion Head works Canal drop WEEK 9 Cross drainage works – Canal regulations – Canal outlets – Canal lining Kennady‟s and Lacey‟s Regime theory WEEK 10 UNIT V IRRIGATION METHODS AND MANAGEMENT Lift irrigation – Tank irrigation – Well irrigation – Irrigation methods: WEEK 11 Surface and Sub-Surface and Micro Irrigation - Merits and demerits – WEEK 12 Irrigation scheduling – Water distribution – Participatory irrigation management with a case study TOTAL :45 PERIODS TEXT BOOKS: 1. Linsley R.K. and Franzini J.B, “Water Resources Engineering”, McGraw-Hill Inc, 2000. 2. Punmia B.C., et. al; Irrigation and water power Engineering, Laxmi Publications, 16th Edition, New Delhi, 2009 3. Garg S. K., “Irrigation Engineering and Hydraulic structures”, Khanna Publishers, 23rd Revised Edition, New Delhi, 2009
REFERENCES: 1. Duggal, K.N. and Soni, J.P., “Elements of Water Resources Engineering”, New Age International Publishers, 2005 2. Chaturvedi M.C., “Water Resources Systems Planning and Management”, Tata McGraw- Hill Inc., New Delhi, 1997.
WEEK – 5 Role of Public, Private and Non-Government Organizations
CE 6007 - HOUSING PLANNING AND MANAGEMENT OBJECTIVE: The objective of the course is to train the students to have a Comprehensive knowledge of planning, design, evaluation, construction and financing of housing projects. The course focuses on cost effective construction materials and methods. Emphasis has also been given on the principles of sustainable housing policies and programmes. WEEK – 1 UNIT I INTRODUCTION TO HOUSING Definition of Basic Terms – House, Home, Household, Apartments, Multi storeyed Buildings, Special Buildings, Objectives and Strategies of National Housing Policies, Principle of Sustainable Housing, Housing Laws at State level WEEK – 2 Bye-laws at Urban and Rural Local Bodies – levels - Development Control Regulations, Institutions for Housing at National, State and Local levels WEEK – 3 UNIT TEST - 1 UNIT II HOUSING PROGRAMMES Basic Concepts, Contents and Standards for Housing Programmes - Sites and Services, Neighborhoods WEEK – 4 UNIT TEST - 1 16 Open Development Plots, Apartments, Rental Housing, Co-operative Housing, Slum Housing Programmes
VISION, MISSION STATEMENT OF THE INSTITUTION Vision
Pursuit of excellence in technical education to create civic responsibility with competency.
Mission
To impart the attributes of global engineers to face industrial challenges with social relevance.
To indoctrinate as front runners through moral practices.
To attain the skills through lifelong learning.